[ 0.767759] i2c_dev: i2c /dev entries driver [ 0.777489] SCSI subsystem initialized [ 0.784585] device-mapper: uevent: version 1.0.3 [ 0.784658] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.954837] xor: automatically using best checksumming function avx [ 0.973502] raid6: sse2x4 gen() 10417 MB/s [ 0.990503] raid6: sse2x2 gen() 9304 MB/s [ 1.007500] raid6: sse2x1 gen() 7666 MB/s [ 1.007501] raid6: using algorithm sse2x4 gen() 10417 MB/s [ 1.024498] raid6: .... xor() 4634 MB/s, rmw enabled [ 1.024499] raid6: using ssse3x2 recovery algorithm [ 1.071533] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 1.084312] ACPI: bus type USB registered [ 1.084334] usbcore: registered new interface driver usbfs [ 1.084341] usbcore: registered new interface driver hub [ 1.084351] usbcore: registered new device driver usb [ 1.292357] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.292387] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.301991] ACPI: button: Power Button [PWRF] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.310670] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.313879] QUIRK: Enable AMD PLL fix [ 1.313899] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.313908] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.313913] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.313920] ehci-pci 0000:00:12.2: debug port 1 [ 1.313967] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 1.320611] libata version 3.00 loaded. [ 1.320756] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.322136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 1.322139] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.322142] usb usb1: Product: EHCI Host Controller [ 1.322144] usb usb1: Manufacturer: Linux 6.2.1-desktop-1omv2390 ehci_hcd [ 1.322145] usb usb1: SerialNumber: ... [ 1.323981] hub 1-0:1.0: USB hub found [ 1.323989] hub 1-0:1.0: 5 ports detected [ 1.324193] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.324198] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.324201] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.324208] ehci-pci 0000:00:13.2: debug port 1 [ 1.324239] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 1.327702] cryptd: max_cpu_qlen set to 1000 [ 1.330756] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.330792] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 1.330794] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.330796] usb usb2: Product: EHCI Host Controller [ 1.330798] usb usb2: Manufacturer: Linux 6.2.1-desktop-1omv2390 ehci_hcd [ 1.330800] usb usb2: SerialNumber: ... [ 1.330893] hub 2-0:1.0: USB hub found [ 1.330900] hub 2-0:1.0: 5 ports detected [ 1.331042] ehci-pci 0000:00:16.2: EHCI Host Controller [ 1.331050] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 1.331053] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.331060] ehci-pci 0000:00:16.2: debug port 1 [ 1.331087] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 1.335547] AVX version of gcm_enc/dec engaged. [ 1.335587] AES CTR mode by8 optimization enabled [ 1.337759] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 1.337794] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 1.337797] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.337799] usb usb3: Product: EHCI Host Controller [ 1.337800] usb usb3: Manufacturer: Linux 6.2.1-desktop-1omv2390 ehci_hcd [ 1.337802] usb usb3: SerialNumber: ... [ 1.337904] hub 3-0:1.0: USB hub found [ 1.337910] hub 3-0:1.0: 4 ports detected [ 1.339462] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.339482] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.339509] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 1.342672] Linux agpgart interface v0.103 [ 1.346290] ahci 0000:00:11.0: version 3.0 [ 1.348504] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.348509] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.349173] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.349178] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 1.356820] scsi host0: ahci [ 1.357120] scsi host1: ahci [ 1.357240] scsi host2: ahci [ 1.357543] scsi host3: ahci [ 1.358480] scsi host4: ahci [ 1.358662] scsi host5: ahci [ 1.359535] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 1.359539] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 1.359541] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 [ 1.359543] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 [ 1.359545] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19 [ 1.359548] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19 [ 1.370695] ACPI: bus type drm_connector registered [ 1.394846] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.02 [ 1.394850] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.394852] usb usb4: Product: OHCI PCI host controller [ 1.394854] usb usb4: Manufacturer: Linux 6.2.1-desktop-1omv2390 ohci_hcd [ 1.394856] usb usb4: SerialNumber: ... [ 1.394957] hub 4-0:1.0: USB hub found [ 1.394965] hub 4-0:1.0: 5 ports detected [ 1.408043] xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010 [ 1.408332] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.408336] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6 [ 1.408342] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.411775] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 1.411778] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.411780] usb usb5: Product: xHCI Host Controller [ 1.411782] usb usb5: Manufacturer: Linux 6.2.1-desktop-1omv2390 xhci-hcd [ 1.411784] usb usb5: SerialNumber: ... [ 1.411866] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 1.411918] tsc: Refined TSC clocksource calibration: 4500.220 MHz [ 1.411923] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x40de3843459, max_idle_ns: 440795364897 ns [ 1.411983] clocksource: Switched to clocksource tsc [ 1.412074] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.413301] hub 5-0:1.0: USB hub found [ 1.413309] hub 5-0:1.0: 2 ports detected [ 1.413390] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 7 [ 1.413472] xhci_hcd 0000:06:00.0: hcc params 0x040040a5 hci version 0x100 quirks 0x0000000000000010 [ 1.413619] xhci_hcd 0000:06:00.0: xHCI Host Controller [ 1.413622] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 8 [ 1.413625] xhci_hcd 0000:06:00.0: Host supports USB 3.0 SuperSpeed [ 1.413665] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 1.413668] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.413670] usb usb7: Product: xHCI Host Controller [ 1.413671] usb usb7: Manufacturer: Linux 6.2.1-desktop-1omv2390 xhci-hcd [ 1.413673] usb usb7: SerialNumber: ... [ 1.413775] hub 7-0:1.0: USB hub found [ 1.413787] hub 7-0:1.0: 4 ports detected [ 1.413926] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 1.413938] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 1.413959] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.413982] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02 [ 1.413984] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.413986] usb usb6: Product: xHCI Host Controller [ 1.413988] usb usb6: Manufacturer: Linux 6.2.1-desktop-1omv2390 xhci-hcd [ 1.413989] usb usb6: SerialNumber: ... [ 1.414094] hub 6-0:1.0: USB hub found [ 1.414101] hub 6-0:1.0: 2 ports detected [ 1.414219] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.414249] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02 [ 1.414252] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.414254] usb usb8: Product: xHCI Host Controller [ 1.414255] usb usb8: Manufacturer: Linux 6.2.1-desktop-1omv2390 xhci-hcd [ 1.414257] usb usb8: SerialNumber: ... [ 1.414374] hub 8-0:1.0: USB hub found [ 1.414386] hub 8-0:1.0: 4 ports detected [ 1.469831] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.02 [ 1.469835] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.469837] usb usb9: Product: OHCI PCI host controller [ 1.469838] usb usb9: Manufacturer: Linux 6.2.1-desktop-1omv2390 ohci_hcd [ 1.469840] usb usb9: SerialNumber: ... [ 1.469928] hub 9-0:1.0: USB hub found [ 1.469936] hub 9-0:1.0: 5 ports detected [ 1.470178] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.470183] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 1.470196] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 1.525824] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.02 [ 1.525827] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.525829] usb usb10: Product: OHCI PCI host controller [ 1.525831] usb usb10: Manufacturer: Linux 6.2.1-desktop-1omv2390 ohci_hcd [ 1.525832] usb usb10: SerialNumber: ... [ 1.525924] hub 10-0:1.0: USB hub found [ 1.525931] hub 10-0:1.0: 2 ports detected [ 1.526127] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 1.526132] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 1.526147] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 1.581859] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.02 [ 1.581862] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.581864] usb usb11: Product: OHCI PCI host controller [ 1.581866] usb usb11: Manufacturer: Linux 6.2.1-desktop-1omv2390 ohci_hcd [ 1.581868] usb usb11: SerialNumber: ... [ 1.582020] hub 11-0:1.0: USB hub found [ 1.582027] hub 11-0:1.0: 4 ports detected [ 1.650754] usb 7-2: new high-speed USB device number 2 using xhci_hcd [ 1.669881] ata4: SATA link down (SStatus 0 SControl 300) [ 1.669904] ata1: SATA link down (SStatus 0 SControl 300) [ 1.669924] ata2: SATA link down (SStatus 0 SControl 300) [ 1.778467] usb 7-2: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 [ 1.778470] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.778473] usb 7-2: Product: Cruzer Blade [ 1.778474] usb 7-2: Manufacturer: SanDisk [ 1.778476] usb 7-2: SerialNumber: ... [ 1.783952] usb-storage 7-2:1.0: USB Mass Storage device detected [ 1.784088] scsi host6: usb-storage 7-2:1.0 [ 1.784162] usbcore: registered new interface driver usb-storage [ 1.818754] usb 4-1: new full-speed USB device number 2 using ohci-pci [ 1.824771] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.824791] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.824808] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.825311] ata6.00: ATA-10: WDC WD10EZEX-00WN4A0, 01.01A01, max UDMA/133 [ 1.825578] ata5.00: HPA detected: current 1953523055, native 1953525168 [ 1.825580] ata5.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133 [ 1.826169] ata5.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.826175] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.826177] ata6.00: Features: NCQ-prio [ 1.827570] ata6.00: configured for UDMA/133 [ 1.827917] ata5.00: configured for UDMA/133 [ 1.829093] ata3.00: ATA-9: SanDisk SDSSDA240G, Z32080RL, max UDMA/133 [ 1.831761] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.840319] ata3.00: Features: Dev-Sleep [ 1.859795] ata3.00: configured for UDMA/133 [ 1.859897] scsi 2:0:0:0: Direct-Access ATA SanDisk SDSSDA24 80RL PQ: 0 ANSI: 5 [ 1.860244] scsi 4:0:0:0: Direct-Access ATA WDC WD10EZEX-00R 0A80 PQ: 0 ANSI: 5 [ 1.860552] scsi 5:0:0:0: Direct-Access ATA WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5 [ 1.866516] usbcore: registered new interface driver uas [ 1.877564] sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 1.877574] sd 2:0:0:0: [sda] Write Protect is off [ 1.877576] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.877590] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.877609] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.877872] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.877876] sd 5:0:0:0: [sdc] 4096-byte physical blocks [ 1.877885] sd 5:0:0:0: [sdc] Write Protect is off [ 1.877888] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.877901] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.877920] sd 5:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 1.877986] sd 4:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.877989] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 1.877996] sd 4:0:0:0: [sdb] Write Protect is off [ 1.877998] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.878011] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.878029] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 1.891634] sda: sda1 sda2 sda3 sda4 [ 1.891790] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.947353] sdb: sdb1 [ 1.947432] sd 4:0:0:0: [sdb] Attached SCSI disk [ 1.952176] sdc: sdc5 [ 1.952246] sd 5:0:0:0: [sdc] Attached SCSI disk [ 1.955187] nvme nvme0: pci function 0000:02:00.0 [ 1.982795] usb 4-1: New USB device found, idVendor=0d8c, idProduct=013c, bcdDevice= 1.00 [ 1.982800] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.982803] usb 4-1: Product: USB PnP Sound Device [ 1.982805] usb 4-1: Manufacturer: C-Media Electronics Inc. [ 1.990561] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.992097] hid: raw HID events driver (C) Jiri Kosina [ 2.010942] nvme nvme0: 8/0/0 default/read/poll queues [ 2.020919] nvme0n1: p1 p2 p3 p4 [ 2.027084] usbcore: registered new interface driver usbhid [ 2.027087] usbhid: USB HID core driver [ 2.029606] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.3/0003:0D8C:013C.0001/input/input2 [ 2.038261] BTRFS: device fsid HASH_D3A-D9B9-B3E2-F66E-0871778855E6 devid 1 transid 18039 /dev/nvme0n1p2 scanned by (udev-worker) (397) [ 2.040453] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 2.082672] hid-generic 0003:0D8C:013C.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:12.0-1/input3 [ 2.093641] EXT4-fs (nvme0n1p4): mounted filesystem HASH_394-C9DC-A35D-18A1-9F44F2DCF83A with ordered data mode. Quota mode: none. [ 2.096160] BTRFS: device label ... devid 1 transid 292 /dev/sdb1 scanned by (udev-worker) (402) [ 2.269708] [drm] amdgpu kernel modesetting enabled. [ 2.269787] amdgpu: CRAT table not found [ 2.269789] amdgpu: Virtual CRAT table created for CPU [ 2.269806] amdgpu: Topology: Add CPU node [ 2.269932] amdgpu 0000:01:00.0: enabling device (0006 -> 0007) [ 2.269992] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1462:0x3417 0xE7). [ 2.270006] [drm] register mmio base: 0xFEA00000 [ 2.270007] [drm] register mmio size: 262144 [ 2.270057] [drm] add ip block number 0 <vi_common> [ 2.270058] [drm] add ip block number 1 <gmc_v8_0> [ 2.270060] [drm] add ip block number 2 <tonga_ih> [ 2.270061] [drm] add ip block number 3 <gfx_v8_0> [ 2.270062] [drm] add ip block number 4 <sdma_v3_0> [ 2.270064] [drm] add ip block number 5 <powerplay> [ 2.270065] [drm] add ip block number 6 <dm> [ 2.270066] [drm] add ip block number 7 <uvd_v6_0> [ 2.270067] [drm] add ip block number 8 <vce_v3_0> [ 2.270096] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from VFCT [ 2.270098] amdgpu: ATOM BIOS: MS-V34113-F1 [ 2.270114] [drm] UVD is enabled in VM mode [ 2.270114] [drm] UVD ENC is enabled in VM mode [ 2.270116] [drm] VCE enabled in VM mode [ 2.270142] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 2.270145] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 2.270147] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 2.270179] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 2.273706] amdgpu 0000:01:00.0: amdgpu: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) [ 2.273710] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 2.273717] [drm] Detected VRAM RAM=4096M, BAR=256M [ 2.273718] [drm] RAM width 256bits GDDR5 [ 2.273760] [drm] amdgpu: 4096M of VRAM memory ready [ 2.273761] [drm] amdgpu: 7956M of GTT memory ready. [ 2.273776] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 2.274142] [drm] PCIE GART of 256M enabled (table at 0x000000F400800000). [ 2.282714] [drm] Chained IB support enabled! [ 2.305283] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 2.328168] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 2.342581] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 2.418693] [drm] Display Core initialized with v3.2.215! [ 2.512111] [drm] UVD and UVD ENC initialized successfully. [ 2.584754] usb 4-3: new low-speed USB device number 3 using ohci-pci [ 2.637053] [drm] VCE initialized successfully. [ 2.637478] kfd kfd: amdgpu: skipped device 1002:67df, PCI rejects atomics 730<0 [ 2.637491] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36 [ 2.640676] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 2.643995] [drm] Initialized amdgpu 3.49.0 20150101 for 0000:01:00.0 on minor 0 [ 2.662776] fbcon: amdgpudrmfb (fb0) is primary device [ 2.662778] fbcon: Deferring console take-over [ 2.662781] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 3.303728] zram0: detected capacity change from 0 to 16294912 [ 3.321553] acpi_cpufreq: overriding BIOS provided _PSD data [ 3.349968] Adding 17985300k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:17985300k SSFS [ 3.372283] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 3.372293] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 3.375148] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 3.389763] usb 4-4: new full-speed USB device number 4 using ohci-pci [ 3.415757] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 3.423809] Adding 8147452k swap on /dev/zram0. Priority:100 extents:1 across:8147452k SSDscFS [ 3.447887] r8169 0000:04:06.0: enabling device (0000 -> 0003) [ 3.455661] r8169 0000:04:06.0 eth0: RTL8169sb/8110sb, 863349DA4F54853D5E2C0669F2C01C07, XID 100, IRQ 21 [ 3.455667] r8169 0000:04:06.0 eth0: jumbo features [frames: 7146 bytes, tx checksumming: ok] snd_hda_intel 0000:00:14.2: enabling device (0000 -> 0002) [ 3.471489] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 3.471576] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 3.485650] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 3.486365] SVM: TSC scaling supported [ 3.486369] kvm: Nested Virtualization enabled [ 3.486370] SVM: kvm: Nested Paging enabled [ 3.486379] SVM: LBR virtualization supported [ 3.486987] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7 [ 3.487051] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8 [ 3.487107] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9 [ 3.487162] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 [ 3.504622] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 [ 3.505112] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 3.505117] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.505120] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.505122] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 3.505124] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 3.505126] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 3.505129] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 3.505131] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 3.505133] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 3.505746] EDAC MC: Ver: 3.0.0 [ 3.508368] MCE: In-kernel MCE decoding enabled. [ 3.518194] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input11 [ 3.518245] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 3.518307] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 3.518346] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input14 [ 3.518385] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input15 [ 3.518425] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input16 [ 3.519015] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 3.527601] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 3.545470] r8169 0000:04:06.0 enp4s6: renamed from eth0 [ 3.560829] usb 4-4: New USB device found, idVendor=04d9, idProduct=fc0b, bcdDevice= 2.50 [ 3.560834] usb 4-4: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 3.560835] usb 4-4: Product: USB Gaming Mouse [ 3.569139] input: USB Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/0003:04D9:FC0B.0004/input/input19 [ 3.569269] hid-generic 0003:04D9:FC0B.0004: input,hidraw3: USB HID v1.10 Mouse [USB Gaming Mouse] on usb-0000:00:12.0-4/input0 [ 3.574177] input: USB Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/0003:04D9:FC0B.0005/input/input20 [ 3.625849] hid-generic 0003:04D9:FC0B.0005: input,hidraw4: USB HID v1.10 Keyboard [USB Gaming Mouse] on usb-0000:00:12.0-4/input1 [ 3.632565] input: USB Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.2/0003:04D9:FC0B.0006/input/input21 [ 3.683851] input: USB Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.2/0003:04D9:FC0B.0006/input/input22 [ 3.683923] hid-generic 0003:04D9:FC0B.0006: input,hiddev0,hidraw5: USB HID v1.10 Device [USB Gaming Mouse] on usb-0000:00:12.0-4/input2 [ 3.702322] mc: Linux media interface: v0.10 [ 3.900052] usbcore: registered new interface driver snd-usb-audio [ 4.604773] RTL8211C Gigabit Ethernet r8169-0-430:00: attached PHY driver (mii_bus:phy_addr=r8169-0-430:00, irq=MAC) [ 4.659672] r8169 0000:04:06.0 enp4s6: Link is Down [ 7.435311] r8169 0000:04:06.0 enp4s6: Link is Up - 1Gbps/Full - flow control rx/tx [ 7.435324] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s6: link becomes ready [ 7.459093] NET: Registered PF_PACKET protocol family [ 452.045815] Non-volatile memory driver v1.3 [ 452.239836] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 452.263965] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 452.264056] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 452.264165] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 452.264263] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 461.029178] Bluetooth: Core ver 2.22 [ 461.029203] NET: Registered PF_BLUETOOTH protocol family [ 461.029205] Bluetooth: HCI device and connection manager initialized [ 461.029209] Bluetooth: HCI socket layer initialized [ 461.029211] Bluetooth: L2CAP socket layer initialized [ 461.029212] Bluetooth: SCO socket layer initialized [ 461.730505] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 461.734229] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 462.409702] amdgpu 0000:01:00.0: amdgpu: Disabling VM faults because of PRT request! [ 528.666495] BTRFS info (device nvme0n1p2): using crc32c (crc32c-intel) checksum algorithm [ 528.666513] BTRFS info (device nvme0n1p2): using free space tree [ 528.668642] BTRFS info (device nvme0n1p2): bdev /dev/nvme0n1p2 errs: wr 0, rd 0, flush 0, corrupt 2, gen 0 [ 528.691172] BTRFS info (device nvme0n1p2): enabling ssd optimizations [ 528.691179] BTRFS info (device nvme0n1p2): auto enabling async discard [ 567.820005] process '...' started with executable stack [ 743.180538] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 743.180542] Bluetooth: BNEP filters: protocol multicast [ 743.180545] Bluetooth: BNEP socket layer initialized [ 1024.530076] r8169 0000:04:06.0 enp4s6: Link is Down [ 1025.236069] PM: hibernation: hibernation entry [ 1025.253703] Filesystems sync: 0.017 seconds [ 1025.253775] Freezing user space processes [ 1025.255353] Freezing user space processes completed (elapsed 0.001 seconds) [ 1025.255357] OOM killer disabled. [ 1025.256730] PM: hibernation: Preallocating image memory [ 1026.582497] PM: hibernation: Allocated 1307924 pages for snapshot [ 1026.582502] PM: hibernation: Allocated 5231696 kbytes in 1.32 seconds (3963.40 MB/s) [ 1026.582505] Freezing remaining freezable tasks [ 1026.583290] Freezing remaining freezable tasks completed (elapsed 0.000 seconds) [ 1026.583510] printk: Suspending console(s) (use no_console_suspend to debug) [ 1026.584056] serial 00:08: disabled [ 1026.626370] xhci_hcd 0000:03:00.0: WARN: xHC save state timeout [ 1026.626398] xhci_hcd 0000:03:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0011 address=0x0 flags=0x0000] xhci_hcd 0000:03:00.0: PM: suspend_common(): xhci_pci_suspend+0x0/0x230 [xhci_pci] returns -110 [ 1026.626410] xhci_hcd 0000:03:00.0: PM: pci_pm_freeze(): hcd_pci_suspend+0x0/0x30 [usbcore] returns -110 [ 1026.626436] xhci_hcd 0000:03:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0x110 returns -110 [ 1026.626447] xhci_hcd 0000:03:00.0: PM: failed to freeze async: error -110 [ 1027.139909] amdgpu 0000:01:00.0: amdgpu: BACO reset [ 1027.347096] usb usb2: root hub lost power or was reset [ 1027.347109] usb usb3: root hub lost power or was reset [ 1027.347135] usb usb7: root hub lost power or was reset [ 1027.347145] usb usb8: root hub lost power or was reset [ 1027.347692] serial 00:08: activated [ 1027.349220] sd 2:0:0:0: [sda] Starting disk [ 1027.349392] sd 4:0:0:0: [sdb] Starting disk [ 1027.349473] sd 5:0:0:0: [sdc] Starting disk [ 1027.385986] nvme nvme0: 8/0/0 default/read/poll queues [ 1027.402280] usb usb4: root hub lost power or was reset [ 1027.402317] usb usb1: root hub lost power or was reset [ 1027.615295] usb 7-2: reset high-speed USB device number 2 using xhci_hcd [ 1027.654470] ata1: SATA link down (SStatus 0 SControl 300) [ 1027.654690] ata4: SATA link down (SStatus 0 SControl 300) [ 1027.654720] ata2: SATA link down (SStatus 0 SControl 300) [ 1027.733283] usb 4-4: reset full-speed USB device number 4 using ohci-pci [ 1027.809327] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1027.809485] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1027.809643] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1027.811580] ata5.00: configured for UDMA/133 [ 1027.812166] ata6.00: configured for UDMA/133 [ 1027.823570] [drm] PCIE GART of 256M enabled (table at 0x000000F400800000). [ 1027.844530] ata3.00: configured for UDMA/133 [ 1028.165279] usb 4-3: reset low-speed USB device number 3 using ohci-pci [ 1028.489228] [drm] Fence fallback timer expired on ring sdma0 [ 1028.597231] usb 4-1: reset full-speed USB device number 2 using ohci-pci [ 1028.993216] [drm] Fence fallback timer expired on ring sdma0 [ 1029.497216] [drm] Fence fallback timer expired on ring sdma0 [ 1030.001218] [drm] Fence fallback timer expired on ring sdma0 [ 1030.505211] [drm] Fence fallback timer expired on ring sdma0 [ 1031.009210] [drm] Fence fallback timer expired on ring sdma0 [ 1031.132464] [drm] UVD and UVD ENC initialized successfully. [ 1031.243524] [drm] VCE initialized successfully. [ 1031.254465] OOM killer enabled. [ 1031.254466] Restarting tasks ... done. [ 1031.257964] PM: hibernation: hibernation exit [ 1031.262546] RTL8211C Gigabit Ethernet r8169-0-430:00: attached PHY driver (mii_bus:phy_addr=r8169-0-430:00, irq=MAC) [ 1031.317146] r8169 0000:04:06.0 enp4s6: Link is Down [ 1034.093940] r8169 0000:04:06.0 enp4s6: Link is Up - 1Gbps/Full - flow control rx/tx [ 1034.093962] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s6: link becomes ready [ 1050.702842] r8169 0000:04:06.0 enp4s6: Link is Down [ 1051.286903] PM: hibernation: hibernation entry