-- Logs begin at Wed 2022-05-04 15:32:46 MSK, end at Thu 2023-04-20 14:55:45 MSK. -- [ 0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-12 [ 0.000000] Linux version 5.15.0-56-generic (XXX@XXX) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #62~20.04.1-Ubuntu SMP Tue Nov 22 21:24:20 UTC 2022 (Ubuntu 5.15.0-56.62~20.04.1-generic 5.15.64) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-56-generic root=UUID=HASH_6AF-C05A-46AB-3813-F303308F9608 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] signal: max sigframe size: 2032 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d808fff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d809000-0x000000009d809fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009d80a000-0x000000009d833fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000009d834000-0x00000000ab499fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ab49a000-0x00000000ab80efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ab80f000-0x00000000ab847fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ab848000-0x00000000abe70fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000abe71000-0x00000000ac4fefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ac4ff000-0x00000000ac4fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ac500000-0x00000000afffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x9b8ea018-0x9b8fa057] usable ==> usable [ 0.000000] e820: update [mem 0x9b8ea018-0x9b8fa057] usable ==> usable [ 0.000000] e820: update [mem 0x9b8cc018-0x9b8e9a57] usable ==> usable [ 0.000000] e820: update [mem 0x9b8cc018-0x9b8e9a57] usable ==> usable [ 0.000000] e820: update [mem 0x9b8bb018-0x9b8cb457] usable ==> usable [ 0.000000] e820: update [mem 0x9b8bb018-0x9b8cb457] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000009b8bb017] usable [ 0.000000] reserve setup_data: [mem 0x000000009b8bb018-0x000000009b8cb457] usable [ 0.000000] reserve setup_data: [mem 0x000000009b8cb458-0x000000009b8cc017] usable [ 0.000000] reserve setup_data: [mem 0x000000009b8cc018-0x000000009b8e9a57] usable [ 0.000000] reserve setup_data: [mem 0x000000009b8e9a58-0x000000009b8ea017] usable [ 0.000000] reserve setup_data: [mem 0x000000009b8ea018-0x000000009b8fa057] usable [ 0.000000] reserve setup_data: [mem 0x000000009b8fa058-0x000000009d808fff] usable [ 0.000000] reserve setup_data: [mem 0x000000009d809000-0x000000009d809fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000009d80a000-0x000000009d833fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000009d834000-0x00000000ab499fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ab49a000-0x00000000ab80efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ab80f000-0x00000000ab847fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000ab848000-0x00000000abe70fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000abe71000-0x00000000ac4fefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ac4ff000-0x00000000ac4fffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000ac500000-0x00000000afffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000044dffffff] usable [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0xab81a000 ACPI 2.0=0xab81a000 SMBIOS=0xac273000 ESRT=0xac1ea118 SMBIOS 3.0=0xac272000 MEMATTR=0xa8691018 MOKvar=0xa8693000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Dell Inc. Latitude E7470/0T6HHJ, BIOS 1.19.4 04/20/2018 [ 0.000000] tsc: Detected 2800.000 MHz processor [ 0.000000] tsc: Detected 2799.927 MHz TSC [ 0.001144] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001148] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001165] last_pfn = 0x44e000 max_arch_pfn = 0x400000000 [ 0.001406] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002946] last_pfn = 0xac500 max_arch_pfn = 0x400000000 [ 0.013046] found SMP MP-table at [mem 0x000fcd60-0x000fcd6f] esrt: Reserving ESRT space from 0x00000000ac1ea118 to 0x00000000ac1ea150. [ 0.013070] e820: update [mem 0xa8693000-0xa8693fff] usable ==> reserved [ 0.013097] Using GB pages for direct mapping [ 0.014017] secureboot: Secure boot disabled [ 0.014018] RAMDISK: [mem 0x3bdb9000-0x3fffdfff] ACPI: Early table checksum verification disabled [ 0.014029] ACPI: RSDP 0x00000000AB81A000 000024 (v02 DELL ) [ 0.014035] ACPI: XSDT 0x00000000AB81A0B0 0000E4 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.014043] ACPI: FACP 0x00000000AB839B78 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.014051] ACPI: DSDT 0x00000000AB81A228 01F94F (v02 DELL CBX3 01072009 INTL 20120913) [ 0.014056] ACPI: FACS 0x00000000ABE6EE80 000040 [ 0.014061] ACPI: UEFI 0x00000000AB83A000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000) [ 0.014066] ACPI: APIC 0x00000000AB83A640 000084 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.014070] ACPI: FPDT 0x00000000AB83A6C8 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.014075] ACPI: MCFG 0x00000000AB83A710 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.014079] ACPI: HPET 0x00000000AB83A750 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.014084] ACPI: SSDT 0x00000000AB83A788 00046D (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.014089] ACPI: LPIT 0x00000000AB83ABF8 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F) [ 0.014094] ACPI: SSDT 0x00000000AB83AC90 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) [ 0.014098] ACPI: SSDT 0x00000000AB83AED8 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) [ 0.014103] ACPI: SSDT 0x00000000AB83DA88 000814 (v02 INTEL xh_rvp07 00000000 INTL 20120913) [ 0.014108] ACPI: SSDT 0x00000000AB83E2A0 0004DC (v02 INTEL zpodd 00001000 INTL 20120913) [ 0.014112] ACPI: DBGP 0x00000000AB83E780 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.014117] ACPI: DBG2 0x00000000AB83E7B8 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.014122] ACPI: SSDT 0x00000000AB83E810 0035DA (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.014126] ACPI: UEFI 0x00000000AB841DF0 000042 (v01 00000000 00000000) [ 0.014131] ACPI: SSDT 0x00000000AB841E38 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.014136] ACPI: SSDT 0x00000000AB842CB0 003BFD (v02 DptfTa DptfTabl 00001000 INTL 20120913) [ 0.014140] ACPI: MSDM 0x00000000AB8468B0 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.014145] ACPI: SLIC 0x00000000AB846908 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.014149] ACPI: DMAR 0x00000000AB846A80 0000A8 (v01 INTEL SKL 00000001 INTL 00000001) [ 0.014154] ACPI: UEFI 0x00000000AB846B28 00005C (v01 INTEL RstSataV 00000000 ?? 00000000) [ 0.014159] ACPI: ASF! 0x00000000AB846B88 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.014168] ACPI: Reserving FACP table memory at [mem 0xab839b78-0xab839c83] ACPI: Reserving DSDT table memory at [mem 0xab81a228-0xab839b76] ACPI: Reserving FACS table memory at [mem 0xabe6ee80-0xabe6eebf] ACPI: Reserving UEFI table memory at [mem 0xab83a000-0xab83a639] ACPI: Reserving APIC table memory at [mem 0xab83a640-0xab83a6c3] ACPI: Reserving FPDT table memory at [mem 0xab83a6c8-0xab83a70b] ACPI: Reserving MCFG table memory at [mem 0xab83a710-0xab83a74b] ACPI: Reserving HPET table memory at [mem 0xab83a750-0xab83a787] ACPI: Reserving SSDT table memory at [mem 0xab83a788-0xab83abf4] ACPI: Reserving LPIT table memory at [mem 0xab83abf8-0xab83ac8b] ACPI: Reserving SSDT table memory at [mem 0xab83ac90-0xab83aed7] ACPI: Reserving SSDT table memory at [mem 0xab83aed8-0xab83da85] ACPI: Reserving SSDT table memory at [mem 0xab83da88-0xab83e29b] ACPI: Reserving SSDT table memory at [mem 0xab83e2a0-0xab83e77b] ACPI: Reserving DBGP table memory at [mem 0xab83e780-0xab83e7b3] ACPI: Reserving DBG2 table memory at [mem 0xab83e7b8-0xab83e80b] ACPI: Reserving SSDT table memory at [mem 0xab83e810-0xab841de9] ACPI: Reserving UEFI table memory at [mem 0xab841df0-0xab841e31] ACPI: Reserving SSDT table memory at [mem 0xab841e38-0xab842caa] ACPI: Reserving SSDT table memory at [mem 0xab842cb0-0xab8468ac] ACPI: Reserving MSDM table memory at [mem 0xab8468b0-0xab846904] ACPI: Reserving SLIC table memory at [mem 0xab846908-0xab846a7d] ACPI: Reserving DMAR table memory at [mem 0xab846a80-0xab846b27] ACPI: Reserving UEFI table memory at [mem 0xab846b28-0xab846b83] ACPI: Reserving ASF! table memory at [mem 0xab846b88-0xab846c2c] ACPI: Reserving BGRT table memory at [mem 0xab846c30-0xab846c67] No NUMA configuration found [ 0.014409] Faking a node at [mem 0x0000000000000000-0x000000044dffffff] NODE_DATA(0) allocated [mem 0x44dfd6000-0x44dffffff] Zone ranges: [ 0.014797] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000044dffffff] Device empty [ 0.014806] Movable zone start for each node [ 0.014810] Early memory node ranges [ 0.014811] node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x000000009d808fff] node 0: [mem 0x000000009d834000-0x00000000ab499fff] node 0: [mem 0x00000000ac4ff000-0x00000000ac4fffff] node 0: [mem 0x0000000100000000-0x000000044dffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000044dffffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.014830] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.014855] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.019291] On node 0, zone DMA32: 43 pages in unavailable ranges [ 0.019349] On node 0, zone DMA32: 4197 pages in unavailable ranges [ 0.040814] On node 0, zone Normal: 15104 pages in unavailable ranges [ 0.040922] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.040934] Reserving Intel graphics memory at [mem 0xae000000-0xafffffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.041386] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.041389] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.041390] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.041392] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.041419] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.041423] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.041426] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.041431] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.041432] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.041441] e820: update [mem 0xa8829000-0xa88adfff] usable ==> reserved [ 0.041463] TSC deadline timer available [ 0.041464] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.041491] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x9b8bb000-0x9b8bbfff] PM: hibernation: Registered nosave memory: [mem 0x9b8cb000-0x9b8cbfff] PM: hibernation: Registered nosave memory: [mem 0x9b8cc000-0x9b8ccfff] PM: hibernation: Registered nosave memory: [mem 0x9b8e9000-0x9b8e9fff] PM: hibernation: Registered nosave memory: [mem 0x9b8ea000-0x9b8eafff] PM: hibernation: Registered nosave memory: [mem 0x9b8fa000-0x9b8fafff] PM: hibernation: Registered nosave memory: [mem 0x9d809000-0x9d809fff] PM: hibernation: Registered nosave memory: [mem 0x9d80a000-0x9d833fff] PM: hibernation: Registered nosave memory: [mem 0xa8693000-0xa8693fff] PM: hibernation: Registered nosave memory: [mem 0xa8829000-0xa88adfff] PM: hibernation: Registered nosave memory: [mem 0xab49a000-0xab80efff] PM: hibernation: Registered nosave memory: [mem 0xab80f000-0xab847fff] PM: hibernation: Registered nosave memory: [mem 0xab848000-0xabe70fff] PM: hibernation: Registered nosave memory: [mem 0xabe71000-0xac4fefff] PM: hibernation: Registered nosave memory: [mem 0xac500000-0xafffffff] PM: hibernation: Registered nosave memory: [mem 0xb0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0xb0000000-0xefffffff] available for PCI devices [ 0.041545] Booting paravirtualized kernel on bare hardware [ 0.041547] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.041557] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.041721] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u524288 [ 0.041731] pcpu-alloc: s208896 r8192 d28672 u524288 alloc=1*2097152 [ 0.041735] pcpu-alloc: [0] 0 1 2 3 [ 0.041774] Built 1 zonelists, mobility grouping on. Total pages: 4101406 [ 0.041776] Policy zone: Normal [ 0.041778] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-56-generic root=UUID=HASH_6AF-C05A-46AB-3813-F303308F9608 ro quiet splash vt.handoff=7 [ 0.041901] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-56-generic", will be passed to user space. [ 0.042785] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.043233] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.043300] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.086864] Memory: 16124732K/16666676K available (16393K kernel code, 4373K rwdata, 10784K rodata, 3228K init, 6580K bss, 541684K reserved, 0K cma-reserved) [ 0.088023] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.088066] Kernel/User page tables isolation: enabled [ 0.088083] ftrace: allocating 50033 entries in 196 pages [ 0.122081] ftrace: allocated 196 pages with 3 groups [ 0.122282] rcu: Hierarchical RCU implementation. [ 0.122283] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.122285] Rude variant of Tasks RCU enabled. [ 0.122286] Tracing variant of Tasks RCU enabled. [ 0.122287] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.122288] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.128780] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.129166] random: crng init done [ 0.129198] Console: colour dummy device 80x25 [ 0.129222] printk: console [tty0] enabled [ 0.129243] ACPI: Core revision 20210730 [ 0.129556] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.129626] APIC: Switch to symmetric I/O mode setup [ 0.129629] DMAR: Host address width 39 [ 0.129630] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.129636] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e [ 0.129640] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.129644] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.129647] DMAR: RMRR base: 0x000000ab5b2000 end: 0x000000ab5d1fff [ 0.129649] DMAR: RMRR base: 0x000000ad800000 end: 0x000000afffffff [ 0.129651] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.129653] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.129655] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.129656] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.131277] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.131279] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.135234] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.153670] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285bfbafad2, max_idle_ns: 440795215530 ns [ 0.153679] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.85 BogoMIPS (lpj=11199708) [ 0.153683] pid_max: default: 32768 minimum: 301 [ 0.156916] LSM: Security Framework initializing [ 0.156931] landlock: Up and running. [ 0.156932] Yama: becoming mindful. [ 0.156958] AppArmor: AppArmor initialized [ 0.157016] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.157043] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.157330] x86/cpu: SGX disabled by BIOS. [ 0.157340] CPU0: Thermal monitoring enabled (TM1) [ 0.157400] process: using mwait in idle threads [ 0.157402] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.157404] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.157412] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.157414] Spectre V2 : Mitigation: IBRS [ 0.157415] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.157417] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.157418] RETBleed: Mitigation: IBRS [ 0.157420] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.157422] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.157432] MDS: Mitigation: Clear CPU buffers [ 0.157433] TAA: Mitigation: TSX disabled [ 0.157434] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.157439] SRBDS: Mitigation: Microcode [ 0.196278] Freeing SMP alternatives memory: 40K [ 0.197146] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1170 [ 0.197159] smpboot: CPU0: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz (family: 0x6, model: 0x4e, stepping: 0x3) [ 0.197343] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.197359] ... version: 4 [ 0.197360] ... bit width: 48 [ 0.197361] ... generic registers: 4 [ 0.197362] ... value mask: 0000ffffffffffff [ 0.197364] ... max period: 00007fffffffffff [ 0.197365] ... fixed-purpose events: 3 [ 0.197366] ... event mask: 000000070000000f [ 0.197499] rcu: Hierarchical SRCU implementation. [ 0.197675] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.197675] smp: Bringing up secondary CPUs ... [ 0.197675] x86: Booting SMP configuration: [ 0.197675] .... node #0, CPUs: #1 #2 [ 0.199107] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.199107] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_XXXX.html for more details. [ 0.199107] #3 [ 0.199107] smp: Brought up 1 node, 4 CPUs [ 0.199107] smpboot: Max logical packages: 1 [ 0.199107] smpboot: Total of 4 processors activated (22399.41 BogoMIPS) [ 0.202287] devtmpfs: initialized [ 0.202287] x86/mm: Memory block size: 128MB [ 0.203526] ACPI: PM: Registering ACPI NVS region [mem 0x9d809000-0x9d809fff] (4096 bytes) [ 0.203526] ACPI: PM: Registering ACPI NVS region [mem 0xab848000-0xabe70fff] (6459392 bytes) [ 0.203526] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.203526] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.203526] pinctrl core: initialized pinctrl subsystem [ 0.203526] PM: RTC time: 07:21:58, date: 2023-03-10 [ 0.203526] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.203526] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.203526] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.203526] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.205810] thermal_sys: Registered thermal governor 'fair_share' [ 0.205812] thermal_sys: Registered thermal governor 'bang_bang' [ 0.205813] thermal_sys: Registered thermal governor 'step_wise' [ 0.205814] thermal_sys: Registered thermal governor 'user_space' [ 0.205816] thermal_sys: Registered thermal governor 'power_allocator' [ 0.205824] EISA bus registered [ 0.205835] cpuidle: using governor ladder [ 0.205840] cpuidle: using governor menu [ 0.205899] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.205899] ACPI: bus type PCI registered [ 0.205899] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.205899] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.205899] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.205899] PCI: Using configuration type 1 for base access [ 0.206348] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.207749] Kprobes globally optimized [ 0.207754] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.207754] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.209767] fbcon: Taking over console [ 0.209786] ACPI: Added _OSI(Module Device) [ 0.209788] ACPI: Added _OSI(Processor Device) [ 0.209790] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.209791] ACPI: Added _OSI(Processor Aggregator Device) [ 0.209793] ACPI: Added _OSI(Linux-Dell-Video) [ 0.209795] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.209796] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.276646] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.281668] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.295650] ACPI: Dynamic OEM Table Load: [ 0.295662] ACPI: SSDT 0xFFFF923581546800 0006A2 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.298426] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.300842] ACPI: Dynamic OEM Table Load: [ 0.300852] ACPI: SSDT 0xFFFF923580F0CC00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.304379] ACPI: Dynamic OEM Table Load: [ 0.304389] ACPI: SSDT 0xFFFF923581540800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.307605] ACPI: Dynamic OEM Table Load: [ 0.307613] ACPI: SSDT 0xFFFF9235801F9000 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.313389] ACPI: EC: EC started [ 0.313391] ACPI: EC: interrupt blocked [ 0.317966] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.317970] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.317972] ACPI: Interpreter enabled [ 0.318033] ACPI: PM: (supports S0 S3 S4 S5) [ 0.318034] ACPI: Using IOAPIC for interrupt routing [ 0.318097] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.318099] PCI: Using E820 reservations for host bridge windows [ 0.319292] ACPI: Enabled 8 GPEs in block 00 to 7F [ 0.322559] ACPI: PM: Power Resource [PG00] ACPI: PM: Power Resource [PG01] ACPI: PM: Power Resource [PG02] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [WRST] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.369728] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.373954] PCI host bridge to bus 0000:00 [ 0.373957] pci_bus 0000:00: root bus resource [bus 00-7e] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xefffffff window] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 [ 0.374558] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 [ 0.374570] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.374611] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.375153] pci 0000:00:04.0: reg 0x10: [mem 0xe1240000-0xe1247fff 64bit] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.375890] pci 0000:00:14.0: reg 0x10: [mem 0xe1230000-0xe123ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.376565] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.376587] pci 0000:00:14.2: reg 0x10: [mem 0xe1257000-0xe1257fff 64bit] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.377105] pci 0000:00:16.0: reg 0x10: [mem 0xe1256000-0xe1256fff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.377699] pci 0000:00:16.3: [8086:9d3d] type 00 class 0x070002 [ 0.377715] pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7] pci 0000:00:16.3: reg 0x14: [mem 0xe1255000-0xe1255fff] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400 [ 0.378225] pci 0000:00:17.0: reg 0x10: [mem 0xe1250000-0xe1251fff] pci 0000:00:17.0: reg 0x14: [mem 0xe1254000-0xe12540ff] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] pci 0000:00:17.0: reg 0x24: [mem 0xe1253000-0xe12537ff] pci 0000:00:17.0: PME# supported from D3hot [ 0.379041] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 [ 0.379149] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.380543] pci 0000:00:1d.0: [8086:9d1a] type 01 class 0x060400 [ 0.380631] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.382002] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 [ 0.382766] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.382786] pci 0000:00:1f.2: reg 0x10: [mem 0xe124c000-0xe124ffff] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300 [ 0.383517] pci 0000:00:1f.3: reg 0x10: [mem 0xe1248000-0xe124bfff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0xe1220000-0xe122ffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.384888] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.384950] pci 0000:00:1f.4: reg 0x10: [mem 0xe1252000-0xe12520ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] pci 0000:00:1f.6: [8086:156f] type 00 class 0x020000 [ 0.385760] pci 0000:00:1f.6: reg 0x10: [mem 0xe1200000-0xe121ffff] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.386918] pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000 [ 0.387007] pci 0000:01:00.0: reg 0x10: [mem 0xe1100000-0xe1101fff 64bit] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.388819] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff] pci 0000:02:00.0: [10ec:525a] type 00 class 0xff0000 [ 0.388974] pci 0000:02:00.0: reg 0x14: [mem 0xe1000000-0xe1000fff] pci 0000:02:00.0: supports D1 D2 [ 0.389124] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.389813] pci 0000:00:1d.0: PCI bridge to [bus 02] pci 0000:00:1d.0: bridge window [mem 0xe1000000-0xe10fffff] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.395318] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.395432] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.395545] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.395658] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.395770] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.395882] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.395996] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.398897] ACPI: EC: interrupt unblocked [ 0.398899] ACPI: EC: event unblocked [ 0.398909] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.398911] ACPI: EC: GPE=0x14 [ 0.398913] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete [ 0.398917] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events [ 0.399037] iommu: Default domain type: Translated [ 0.399037] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.399037] SCSI subsystem initialized [ 0.399037] libata version 3.00 loaded. [ 0.399037] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.399037] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.399037] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.399037] vgaarb: loaded [ 0.399037] ACPI: bus type USB registered [ 0.399037] usbcore: registered new interface driver usbfs [ 0.399037] usbcore: registered new interface driver hub [ 0.399037] usbcore: registered new device driver usb [ 0.399037] pps_core: LinuxPPS API ver. 1 registered [ 0.399037] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 0.399037] PTP clock support registered [ 0.399037] EDAC MC: Ver: 3.0.0 [ 0.399037] Registered efivars operations [ 0.399037] NetLabel: Initializing [ 0.399037] NetLabel: domain hash size = 128 [ 0.399037] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.399037] NetLabel: unlabeled traffic allowed by default [ 0.399037] PCI: Using ACPI for IRQ routing [ 0.415633] PCI: pci_cache_line_size set to 64 bytes [ 0.416177] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] e820: reserve RAM buffer [mem 0x9b8bb018-0x9bffffff] e820: reserve RAM buffer [mem 0x9b8cc018-0x9bffffff] e820: reserve RAM buffer [mem 0x9b8ea018-0x9bffffff] e820: reserve RAM buffer [mem 0x9d809000-0x9fffffff] e820: reserve RAM buffer [mem 0xa8693000-0xabffffff] e820: reserve RAM buffer [mem 0xa8829000-0xabffffff] e820: reserve RAM buffer [mem 0xab49a000-0xabffffff] e820: reserve RAM buffer [mem 0xac500000-0xafffffff] e820: reserve RAM buffer [mem 0x44e000000-0x44fffffff] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.416201] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.417717] clocksource: Switched to clocksource tsc-early [ 0.431259] VFS: Disk quotas dquot_6.6.0 [ 0.431279] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.431423] AppArmor: AppArmor Filesystem Enabled [ 0.431466] pnp: PnP ACPI init [ 0.431919] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.431926] system 00:00: [io 0xffff] has been reserved [ 0.431929] system 00:00: [io 0xffff] has been reserved [ 0.431931] system 00:00: [io 0xffff] has been reserved [ 0.431934] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.431936] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.432164] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.434760] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.434764] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.434767] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.434770] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.434772] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.434775] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.434778] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.434781] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.434783] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.434786] system 00:06: [mem 0xeffe0000-0xefffffff] has been reserved [ 0.434861] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.434864] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.434867] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.434869] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.434872] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.434875] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.434877] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.435394] system 00:08: [io 0xff00-0xfffe] has been reserved [ 0.437779] system 00:09: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.437782] system 00:09: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.437785] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.437788] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.437790] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.441200] pnp: PnP ACPI: found 10 devices [ 0.447639] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.447735] NET: Registered PF_INET protocol family [ 0.447895] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.450264] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.450304] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.450396] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.450596] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.450681] TCP: Hash tables configured (established 131072 bind 65536) [ 0.450763] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.450853] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.450903] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.450973] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.450981] NET: Registered PF_XDP protocol family [ 0.450993] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [mem 0xe1100000-0xe11fffff] pci 0000:00:1d.0: PCI bridge to [bus 02] pci 0000:00:1d.0: bridge window [mem 0xe1000000-0xe10fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xefffffff window] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:01: resource 1 [mem 0xe1100000-0xe11fffff] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe10fffff] PCI: CLS 0 bytes, default 64 [ 0.452479] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.452480] software IO TLB: mapped [mem 0x00000000a4691000-0x00000000a8691000] (64MB) [ 0.452512] Trying to unpack rootfs image as initramfs... [ 0.460545] Initialise system trusted keyrings [ 0.460557] Key type blacklist registered [ 0.460594] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.463405] zbud: loaded [ 0.463912] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.464155] fuse: init (API version 7.34) [ 0.464394] integrity: Platform Keyring initialized [ 0.475402] Key type asymmetric registered [ 0.475407] Asymmetric key parser 'x509' registered [ 0.475438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.475482] io scheduler mq-deadline registered [ 0.476061] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.476147] pcieport 0000:00:1c.0: AER: enabled with IRQ 122 [ 0.476541] pcieport 0000:00:1d.0: PME: Signaling with IRQ 123 [ 0.476622] pcieport 0000:00:1d.0: AER: enabled with IRQ 123 [ 0.476752] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.480447] ACPI: AC: AC Adapter [AC] (on-line) [ 0.480569] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.480624] ACPI: button: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.480730] ACPI: button: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.480815] ACPI: button: Sleep Button [SBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.480914] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.483951] ACPI: thermal: Thermal Zone [THM] (25 C) [ 0.484263] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.487851] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 0.508866] 0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A [ 0.510672] Linux agpgart interface v0.103 [ 0.515872] loop: module loaded [ 0.516256] tun: Universal TUN/TAP device driver, 1.6 [ 0.516294] PPP generic driver version 2.4.2 [ 0.516364] VFIO - User Level meta-driver version: 0.3 [ 0.516452] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.516457] ehci-pci: EHCI PCI platform driver [ 0.516467] ehci-platform: EHCI generic platform driver [ 0.516478] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.516480] ohci-pci: OHCI PCI platform driver [ 0.516489] ohci-platform: OHCI generic platform driver [ 0.516504] uhci_hcd: USB Universal Host Controller Interface driver [ 0.516584] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.517057] i8042: Warning: Keylock active [ 0.519715] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.519725] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.520003] mousedev: PS/2 mouse device common for all mice [ 0.520319] rtc_cmos 00:01: RTC can wake from S4 [ 0.521136] rtc_cmos 00:01: registered as rtc0 [ 0.521307] rtc_cmos 00:01: setting system clock to 2023-03-10T07:21:59 UTC (1678432919) [ 0.521331] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.521346] i2c_dev: i2c /dev entries driver [ 0.521822] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.525595] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.525643] device-mapper: uevent: version 1.0.3 [ 0.525727] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: XXX@XXX [ 0.525759] platform eisa.0: Probing EISA bus 0 [ 0.525762] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.525764] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.525766] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.525768] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.525770] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.525772] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.525774] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.525776] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.525778] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.525779] platform eisa.0: EISA: Detected 0 cards [ 0.525784] intel_pstate: Intel P-state driver initializing [ 0.525921] intel_pstate: HWP enabled [ 0.525955] ledtrig-cpu: registered to indicate activity on CPUs [ 0.525980] efifb: probing for efifb [ 0.526002] efifb: showing boot graphics [ 0.527265] efifb: framebuffer at 0xd0000000, using 8100k, total 8100k [ 0.527267] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.527269] efifb: scrolling: redraw [ 0.527270] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.527449] Console: switching to colour frame buffer device 240x67 [ 0.532356] fb0: EFI VGA frame buffer device [ 0.532373] EFI Variables Facility v0.08 2004-May-17 [ 0.532688] ACPI: battery: Slot [BAT0] (battery present) [ 0.537967] intel_pmc_core INT33A1:00: initialized [ 0.538041] drop_monitor: Initializing network drop monitor service [ 0.538189] NET: Registered PF_INET6 protocol family [ 0.618049] Freeing initrd memory: 67860K [ 0.624196] Segment Routing with IPv6 [ 0.624223] In-situ OAM (IOAM) with IPv6 [ 0.624245] NET: Registered PF_PACKET protocol family [ 0.624312] Key type dns_resolver registered [ 0.624559] microcode: sig=0x406e3, pf=0x80, revision=0xf0 [ 0.624594] microcode: Microcode Update Driver: v2.2. [ 0.624598] IPI shorthand broadcast: enabled [ 0.624606] sched_clock: Marking stable (624050298, 540008)->(632700653, -8110347) [ 0.624764] registered taskstats version 1 [ 0.624804] Loading compiled-in X.509 certificates [ 0.625349] Loaded X.509 cert 'Build time autogenerated kernel key: 743aac884e1f1b515d3af8a587c37a461d007824' [ 0.625833] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.626303] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.626304] blacklist: Loading compiled-in revocation X.509 certificates [ 0.626319] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.626401] zswap: loaded using pool lzo/zbud [ 0.626535] Key type ._fscrypt registered [ 0.626536] Key type .fscrypt registered [ 0.626537] Key type fscrypt-provisioning registered [ 0.629867] Key type encrypted registered [ 0.629871] AppArmor: AppArmor sha1 policy hashing enabled [ 0.630137] integrity: Loading X.509 certificate: UEFI:db [ 0.630160] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.630161] integrity: Loading X.509 certificate: UEFI:db [ 0.630193] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.630339] integrity: Revoking X.509 certificate: UEFI:dbx [ 0.630369] blacklist: Revoked X.509 cert 'Microsoft Windows PCA 2010: d14fa98a0708cef4241898e500fff3d6791d37bc' [ 0.630528] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 0.630733] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.630736] ima: No TPM chip found, activating TPM-bypass! [ 0.630738] Loading compiled-in module X.509 certificates [ 0.631215] Loaded X.509 cert 'Build time autogenerated kernel key: 743aac884e1f1b515d3af8a587c37a461d007824' [ 0.631217] ima: Allocated hash algorithm: sha1 [ 0.631222] ima: No architecture policies found [ 0.631230] evm: Initialising EVM extended attributes: [ 0.631231] evm: security.selinux [ 0.631232] evm: security.SMACK64 [ 0.631233] evm: security.SMACK64EXEC [ 0.631234] evm: security.SMACK64TRANSMUTE [ 0.631234] evm: security.SMACK64MMAP [ 0.631235] evm: security.apparmor [ 0.631236] evm: security.ima [ 0.631237] evm: security.capability [ 0.631237] evm: HMAC attrs: 0x1 [ 0.631453] PM: Magic number: 15:295:369 [ 0.631666] RAS: Correctable Errors collector initialized. [ 0.632683] Freeing unused decrypted memory: 2036K [ 0.633126] Freeing unused kernel image (initmem) memory: 3228K [ 0.653911] Write protecting the kernel read-only data: 30720k [ 0.655080] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 0.655679] Freeing unused kernel image (rodata/data gap) memory: 1504K [ 0.717778] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.717780] x86/mm: Checking user space page tables [ 0.760329] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.760333] Run /init as init process [ 0.760334] with arguments: [ 0.760335] /init [ 0.760336] splash [ 0.760337] with environment: [ 0.760338] HOME=/ [ 0.760339] TERM=linux [ 0.760340] BOOT_IMAGE=/boot/vmlinuz-5.15.0-56-generic [ 0.911611] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.911621] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.912325] ahci 0000:00:17.0: version 3.0 [ 0.912699] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 0.914009] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.914015] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.914018] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.914057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 0.914060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.914062] usb usb1: Product: xHCI Host Controller [ 0.914064] usb usb1: Manufacturer: Linux 5.15.0-56-generic xhci-hcd [ 0.914066] usb usb1: SerialNumber: ... [ 0.914200] hub 1-0:1.0: USB hub found [ 0.914216] hub 1-0:1.0: 12 ports detected [ 0.915118] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 0.915144] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl RAID mode [ 0.915149] ahci 0000:00:17.0: flags: 64bit ncq ilck stag pm led clo only pio slum part sxs deso sadm sds apst [ 0.916664] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 0.916668] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.916671] usb usb2: Product: xHCI Host Controller [ 0.916673] usb usb2: Manufacturer: Linux 5.15.0-56-generic xhci-hcd [ 0.916675] usb usb2: SerialNumber: ... [ 0.916802] hub 2-0:1.0: USB hub found [ 0.916814] hub 2-0:1.0: 6 ports detected [ 0.917539] e1000e: Intel(R) PRO/1000 Network Driver [ 0.917541] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.930037] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.930487] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.930532] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.941052] scsi host0: ahci [ 0.941488] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 0.945091] scsi host1: ahci [ 0.969723] scsi host2: ahci [ 0.969797] ata1: SATA max UDMA/133 abar m2048@0xe1253000 port 0xe1253100 irq 126 [ 0.969806] ata2: SATA max UDMA/133 abar m2048@0xe1253000 port 0xe1253180 irq 126 [ 0.969809] ata3: SATA max UDMA/133 abar m2048@0xe1253000 port 0xe1253200 irq 126 [ 0.994444] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 0.994789] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.116929] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.182016] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 1.182021] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.182104] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 1.249718] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.286574] ata1: SATA link down (SStatus 4 SControl 300) [ 1.421938] usb 1-2: New USB device found, idVendor=0bda, idProduct=5686, bcdDevice=57.29 [ 1.421951] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 1.421958] usb 1-2: Product: Integrated_Webcam_HD [ 1.421963] usb 1-2: Manufacturer: CNFEH53M224040019082 [ 1.421968] usb 1-2: SerialNumber: ... [ 1.469918] tsc: Refined TSC clocksource calibration: 2807.984 MHz [ 1.469934] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879b723ee9, max_idle_ns: 440795330574 ns [ 1.469992] clocksource: Switched to clocksource tsc [ 1.549906] usb 1-8: new full-speed USB device number 3 using xhci_hcd [ 1.598506] ata2: SATA link down (SStatus 0 SControl 300) [ 1.700533] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01 [ 1.700546] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.909731] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.909984] ata3.00: ATA-10: Micron 1100 SATA 512GB, M0DL002, max UDMA/133 [ 1.913664] ata3.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.915742] ata3.00: Features: Dev-Sleep NCQ-sndrcv NCQ-prio [ 1.922500] ata3.00: configured for UDMA/133 [ 1.922824] scsi 2:0:0:0: Direct-Access ATA Micron 1100 SATA L002 PQ: 0 ANSI: 5 [ 1.923494] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.923505] ata3.00: Enabling discard_zeroes_data [ 1.923622] sd 2:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 1.923625] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 1.923638] sd 2:0:0:0: [sda] Write Protect is off [ 1.923640] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.923664] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.923902] ata3.00: Enabling discard_zeroes_data [ 1.945227] sda: sda1 sda2 [ 1.945533] ata3.00: Enabling discard_zeroes_data [ 1.973976] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.981367] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 2.005932] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input7 [ 2.018866] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6 [ 5.075415] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 5.650736] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none. [ 5.660681] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS [ 5.673034] lp: driver loaded but no devices found [ 5.678111] ppdev: user-space parallel port driver [ 5.680800] parport_pc 00:05: [io 0x0378-0x037b] parport_pc 00:05: activated [ 5.684425] parport_pc 00:05: reported by Plug and Play ACPI [ 5.704129] IPMI message handler: version 39.2 [ 5.706130] ipmi device interface [ 5.764211] loop0: detected capacity change from 0 to 8 [ 5.797820] loop1: detected capacity change from 0 to 113888 [ 5.797937] loop2: detected capacity change from 0 to 129496 [ 5.799198] loop3: detected capacity change from 0 to 129584 [ 5.805930] loop4: detected capacity change from 0 to 448512 [ 5.806033] loop5: detected capacity change from 0 to 709280 [ 5.806130] loop6: detected capacity change from 0 to 133320 [ 5.806211] loop7: detected capacity change from 0 to 187776 [ 5.806719] loop8: detected capacity change from 0 to 94064 [ 5.806830] loop9: detected capacity change from 0 to 113896 [ 5.806863] loop11: detected capacity change from 0 to 101624 [ 5.807164] loop10: detected capacity change from 0 to 94056 [ 5.822567] loop12: detected capacity change from 0 to 448512 [ 5.832170] loop13: detected capacity change from 0 to 709216 [ 5.989428] input: DELL Wireless hotkeys as /devices/virtual/input/input8 [ 6.191345] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.235153] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 6.236840] mc: Linux media interface: v0.10 [ 6.269009] pstore: Using crash dump compression: deflate [ 6.269020] pstore: Registered efi as persistent store backend [ 6.274717] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 6.274736] videodev: Linux video capture interface: v2.00 [ 6.283185] Bluetooth: Core ver 2.22 [ 6.283200] NET: Registered PF_BLUETOOTH protocol family [ 6.283202] Bluetooth: HCI device and connection manager initialized [ 6.283205] Bluetooth: HCI socket layer initialized [ 6.283206] Bluetooth: L2CAP socket layer initialized [ 6.283209] Bluetooth: SCO socket layer initialized [ 6.299956] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 6.310531] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.310824] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.319081] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/HASH_F6F-461E-5551-B932-4B79FFAD3E75/input/input9 [ 6.324382] intel_rapl_common: Found RAPL domain package [ 6.324386] intel_rapl_common: Found RAPL domain dram [ 6.342599] usbcore: registered new interface driver btusb [ 6.349521] Intel(R) Wireless WiFi driver for Linux [ 6.350120] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002) [ 6.350186] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 6.356608] Bluetooth: hci0: Device revision is 5 [ 6.356612] Bluetooth: hci0: Secure boot is enabled [ 6.356614] Bluetooth: hci0: OTP lock is enabled [ 6.356615] Bluetooth: hci0: API lock is enabled [ 6.356616] Bluetooth: hci0: Debug lock is disabled [ 6.356617] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 6.358466] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 6.358469] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.358470] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.358471] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 6.358472] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 6.358473] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 6.359687] iwlwifi 0000:01:00.0: Found debug destination: EXTERNAL_DRAM [ 6.359691] iwlwifi 0000:01:00.0: Found debug configuration: 0 [ 6.360142] iwlwifi 0000:01:00.0: loaded firmware version 36.77d01142.0 8000C-36.ucode op_mode iwlmvm [ 6.362884] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 6.443892] usb 1-2: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5686) [ 6.458197] cryptd: max_cpu_qlen set to 1000 [ 6.463042] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input10 [ 6.463122] usbcore: registered new interface driver uvcvideo [ 6.485042] AVX2 version of gcm_enc/dec engaged. [ 6.485092] AES CTR mode by8 optimization enabled [ 6.494148] Console: switching to colour dummy device 80x25 [ 6.494212] i915 0000:00:02.0: vgaarb: deactivate vga console [ 6.498645] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x204 [ 6.503763] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 6.504951] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) [ 6.506180] thermal thermal_zone7: failed to read out thermal zone (-61) [ 6.507338] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 6.507838] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes for firmware monitor. [ 6.587181] iwlwifi 0000:01:00.0: base HW address: XX:XX:XX:XX:XX:XX [ 6.642219] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 6.642226] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 6.662020] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 6.668504] dell_laptop: Using i8042 filter function for receiving events [ 6.714167] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 6.731427] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.735985] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 6.780256] fbcon: i915drmfb (fb0) is primary device [ 6.791821] Console: switching to colour frame buffer device 240x67 [ 6.818338] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 6.901154] intel_tcc_cooling: Programmable TCC Offset detected [ 6.905818] intel_rapl_common: Found RAPL domain package [ 6.905821] intel_rapl_common: Found RAPL domain core [ 6.905822] intel_rapl_common: Found RAPL domain uncore [ 6.905824] intel_rapl_common: Found RAPL domain dram [ 6.905825] intel_rapl_common: Found RAPL domain psys [ 6.910820] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.983899] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3235: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 6.983906] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 6.983909] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 6.983912] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.983914] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.983917] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x1a [ 6.983919] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 [ 6.983922] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x18 [ 6.983924] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13 [ 7.115577] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 7.346309] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 7.349998] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 7.350065] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 7.350141] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 7.350203] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 7.350257] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 7.350311] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 7.350379] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 7.908108] Bluetooth: hci0: Waiting for firmware download to complete [ 7.908593] Bluetooth: hci0: Firmware loaded in 1509477 usecs [ 7.908640] Bluetooth: hci0: Waiting for device to boot [ 7.919634] Bluetooth: hci0: Device booted in 10764 usecs [ 7.920011] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 7.923632] Bluetooth: hci0: Applying Intel DDC parameters completed [ 7.924607] Bluetooth: hci0: Reading supported features failed (-16) [ 7.925614] Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018 [ 8.139659] ipmi_si: IPMI System Interface driver [ 8.139744] ipmi_si: Unable to find any System Interface(s) [ 8.215523] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.215527] Bluetooth: BNEP filters: protocol multicast [ 8.215531] Bluetooth: BNEP socket layer initialized [ 8.228418] NET: Registered PF_ALG protocol family [ 8.296356] process '/usr/bin/anydesk' started with executable stack [ 8.759899] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 8.906711] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 8.987475] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [ 9.543486] loop14: detected capacity change from 0 to 8 [ 12.618747] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [ 12.627329] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 12.634840] wlp1s0: authenticated [ 12.637795] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 12.663488] rfkill: input handler disabled [ 12.741700] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [ 12.762593] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [ 12.770590] wlp1s0: associated [ 12.870096] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 18.172054] Bluetooth: RFCOMM TTY layer initialized [ 18.172064] Bluetooth: RFCOMM socket layer initialized [ 18.172071] Bluetooth: RFCOMM ver 1.11 [ 18.237027] rfkill: input handler enabled [ 21.747379] rfkill: input handler disabled [ 217.209645] wlp1s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [ 222.022617] PM: suspend entry (deep) [ 222.069720] Filesystems sync: 0.047 seconds [ 222.070419] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 222.072419] OOM killer disabled. [ 222.072420] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 222.073763] printk: Suspending console(s) (use no_console_suspend to debug) [ 222.084428] e1000e: EEE TX LPI TIMER: 00000011 [ 222.093087] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 222.093895] sd 2:0:0:0: [sda] Stopping disk [ 222.370231] ACPI: EC: interrupt blocked [ 222.418154] ACPI: PM: Preparing to enter system sleep state S3 [ 222.427999] ACPI: EC: event blocked [ 222.428003] ACPI: EC: EC stopped [ 222.428005] ACPI: PM: Saving platform NVS memory [ 222.428108] Disabling non-boot CPUs ... [ 222.430287] smpboot: CPU 1 is now offline [ 222.435138] smpboot: CPU 2 is now offline [ 222.437623] smpboot: CPU 3 is now offline [ 222.453625] ACPI: PM: Low-level resume complete [ 222.453714] ACPI: EC: EC started [ 222.453718] ACPI: PM: Restoring platform NVS memory [ 222.454999] Enabling non-boot CPUs ... [ 222.455166] x86: Booting SMP configuration: [ 222.455171] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 222.470137] CPU1 is up [ 222.470277] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 222.475687] CPU2 is up [ 222.475837] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 222.480542] CPU3 is up [ 222.488870] ACPI: PM: Waking up from system sleep state S3 [ 222.732006] ACPI: EC: interrupt unblocked [ 222.795966] ACPI: EC: event unblocked [ 222.801870] sd 2:0:0:0: [sda] Starting disk [ 222.802891] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [ 222.802915] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 222.802933] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 222.803983] xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit [ 222.804008] usb usb1: root hub lost power or was reset [ 222.804022] usb usb2: root hub lost power or was reset [ 223.115998] ata1: SATA link down (SStatus 4 SControl 300) [ 223.116060] ata2: SATA link down (SStatus 0 SControl 300) [ 223.124591] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 223.135431] ata3.00: configured for UDMA/133 [ 223.136015] ata3.00: Enabling discard_zeroes_data [ 223.312166] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [ 223.588546] usb 1-8: reset full-speed USB device number 3 using xhci_hcd [ 223.797225] OOM killer enabled. [ 223.797227] Restarting tasks ... [ 223.798953] acpi PNP0401:00: Already enumerated [ 223.799896] acpi PNP0501:00: Still not present [ 223.800093] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [ 223.804482] done. [ 223.816381] thermal thermal_zone7: failed to read out thermal zone (-61) [ 223.816784] Bluetooth: hci0: Device revision is 5 [ 223.816787] Bluetooth: hci0: Secure boot is enabled [ 223.816788] Bluetooth: hci0: OTP lock is enabled [ 223.816790] Bluetooth: hci0: API lock is enabled [ 223.816790] Bluetooth: hci0: Debug lock is disabled [ 223.816791] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 223.816796] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [ 223.897435] PM: suspend exit [ 224.078499] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 224.287169] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 224.434935] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [ 224.515850] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [ 225.329785] Bluetooth: hci0: Waiting for firmware download to complete [ 225.330774] Bluetooth: hci0: Firmware loaded in 1478611 usecs [ 225.330881] Bluetooth: hci0: Waiting for device to boot [ 225.341820] Bluetooth: hci0: Device booted in 10772 usecs [ 225.341835] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [ 225.345847] Bluetooth: hci0: Applying Intel DDC parameters completed [ 225.346844] Bluetooth: hci0: Reading supported features failed (-16) [ 225.347837] Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018 [ 228.131580] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [ 228.141297] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 228.146758] wlp1s0: authenticated [ 228.148064] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 228.251671] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [ 228.309431] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [ 228.318572] wlp1s0: associated [ 228.384251] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 363.622081] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [ 364.798297] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [ 364.805395] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [ 364.808888] wlp1s0: authenticated [ 364.815588] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [ 364.824553] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [ 364.826797] wlp1s0: associated [ 427.155872] loop14: detected capacity change from 0 to 102072 [ 431.100174] loop15: detected capacity change from 0 to 8 [ 442.975936] loop15: detected capacity change from 0 to 129608 [ 448.661595] loop2: detected capacity change from 0 to 113888 [ 515.581185] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: Rx/Tx [ 515.583278] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 519.772853] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 519.772929] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 570.527324] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 573.611836] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 672.409769] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 683.173290] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 683.173296] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [ 2088.301959] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 2197.784450] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: None [ 2197.786495] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 2201.683163] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 2322.410831] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 2325.431890] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 2651.050284] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 2655.698006] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 2790.069665] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [ 2793.076125] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [15641.188337] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [15642.792492] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [15642.799765] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [15642.804749] wlp1s0: authenticated [15642.805941] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [15642.813454] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [15642.815476] wlp1s0: associated [19705.248998] wlp1s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [19706.766152] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [19709.949125] PM: suspend entry (deep) [19710.005530] Filesystems sync: 0.056 seconds [19710.007115] Freezing user space processes ... (elapsed 0.006 seconds) done. [19710.014078] OOM killer disabled. [19710.014081] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [19710.015531] printk: Suspending console(s) (use no_console_suspend to debug) [19710.033769] sd 2:0:0:0: [sda] Synchronizing SCSI cache [19710.033938] e1000e: EEE TX LPI TIMER: 00000011 [19710.035707] sd 2:0:0:0: [sda] Stopping disk [19710.315134] ACPI: EC: interrupt blocked [19710.363003] ACPI: PM: Preparing to enter system sleep state S3 [19710.376285] ACPI: EC: event blocked [19710.376289] ACPI: EC: EC stopped [19710.376291] ACPI: PM: Saving platform NVS memory [19710.376394] Disabling non-boot CPUs ... [19710.378533] smpboot: CPU 1 is now offline [19710.383058] smpboot: CPU 2 is now offline [19710.385615] smpboot: CPU 3 is now offline [19710.391905] ACPI: PM: Low-level resume complete [19710.391956] ACPI: EC: EC started [19710.391956] ACPI: PM: Restoring platform NVS memory [19710.392701] Enabling non-boot CPUs ... [19710.392745] x86: Booting SMP configuration: [19710.392746] smpboot: Booting Node 0 Processor 1 APIC 0x2 [19710.395832] CPU1 is up [19710.395860] smpboot: Booting Node 0 Processor 2 APIC 0x1 [19710.396910] CPU2 is up [19710.396940] smpboot: Booting Node 0 Processor 3 APIC 0x3 [19710.397711] CPU3 is up [19710.399391] ACPI: PM: Waking up from system sleep state S3 [19710.519972] ACPI: EC: interrupt unblocked [19710.567615] ACPI: EC: event unblocked [19710.570204] sd 2:0:0:0: [sda] Starting disk [19710.572516] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [19710.572531] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [19710.572876] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [19710.835344] usb 1-8: reset full-speed USB device number 3 using xhci_hcd [19710.881237] ata1: SATA link down (SStatus 4 SControl 300) [19710.881832] ata2: SATA link down (SStatus 0 SControl 300) [19710.885873] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [19710.894137] ata3.00: configured for UDMA/133 [19710.894375] ata3.00: Enabling discard_zeroes_data [19711.111685] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [19711.339620] OOM killer enabled. [19711.339622] Restarting tasks ... [19711.341271] acpi PNP0401:00: Already enumerated [19711.342195] acpi PNP0501:00: Still not present [19711.351228] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 [19711.355489] done. [19711.357895] Bluetooth: hci0: Device revision is 5 [19711.357900] Bluetooth: hci0: Secure boot is enabled [19711.357902] Bluetooth: hci0: OTP lock is enabled [19711.357904] Bluetooth: hci0: API lock is enabled [19711.357905] Bluetooth: hci0: Debug lock is disabled [19711.357907] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [19711.358084] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi [19711.381385] thermal thermal_zone7: failed to read out thermal zone (-61) [19711.472350] PM: suspend exit [19711.721926] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [19712.003879] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [19712.153060] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [19712.234865] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [19713.043296] Bluetooth: hci0: Waiting for firmware download to complete [19713.044043] Bluetooth: hci0: Firmware loaded in 1646440 usecs [19713.044167] Bluetooth: hci0: Waiting for device to boot [19713.056003] Bluetooth: hci0: Device booted in 11616 usecs [19713.056115] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc [19713.060084] Bluetooth: hci0: Applying Intel DDC parameters completed [19713.061076] Bluetooth: hci0: Reading supported features failed (-16) [19713.061974] Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018 [19715.888350] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [19715.897401] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [19715.905133] wlp1s0: authenticated [19715.907292] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [19715.916591] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [19715.922074] wlp1s0: associated [19715.987941] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [19730.847159] usb 1-4: new full-speed USB device number 4 using xhci_hcd [19730.996428] usb 1-4: New USB device found, idVendor=27dd, idProduct=0103, bcdDevice= 1.03 [19730.996433] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [19730.996435] usb 1-4: Product: 2D BarCode Scanner [19730.996436] usb 1-4: Manufacturer: 2D BarCode Scanner [19730.996438] usb 1-4: SerialNumber: ... [19731.021826] hid: raw HID events driver (C) Jiri Kosina [19731.029322] usbcore: registered new interface driver usbhid [19731.029326] usbhid: USB HID core driver [19731.045055] input: 2D BarCode Scanner 2D BarCode Scanner as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:27DD:0103.0001/input/input20 [19731.103488] hid-generic 0003:27DD:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [2D BarCode Scanner 2D BarCode Scanner] on usb-0000:00:14.0-4/input0 [19733.619358] usb 1-4: USB disconnect, device number 4 [19737.487127] usb 1-4: new low-speed USB device number 5 using xhci_hcd [19737.638652] usb 1-4: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [19737.638658] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [19737.638661] usb 1-4: Product: USB Optical Mouse [19737.638663] usb 1-4: Manufacturer: Logitech [19737.641777] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C077.0002/input/input21 [19737.642011] hid-generic 0003:046D:C077.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-4/input0 [19834.160796] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [19834.160857] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [19957.362977] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [19957.373509] JFS: nTxBlock = 8192, nTxLock = 65536 [19957.386032] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [19957.404183] QNX4 filesystem 0.2.3 registered. [19957.482720] raid6: avx2x4 gen() 37175 MB/s [19957.550692] raid6: avx2x4 xor() 17628 MB/s [19957.618676] raid6: avx2x2 gen() 33009 MB/s [19957.686656] raid6: avx2x2 xor() 22010 MB/s [19957.754626] raid6: avx2x1 gen() 26538 MB/s [19957.822609] raid6: avx2x1 xor() 13319 MB/s [19957.890581] raid6: sse2x4 gen() 15366 MB/s [19957.958559] raid6: sse2x4 xor() 9236 MB/s [19958.026538] raid6: sse2x2 gen() 15566 MB/s [19958.094518] raid6: sse2x2 xor() 9468 MB/s [19958.162490] raid6: sse2x1 gen() 13209 MB/s [19958.230476] raid6: sse2x1 xor() 6652 MB/s [19958.230479] raid6: using algorithm avx2x4 gen() 37175 MB/s [19958.230480] raid6: .... xor() 17628 MB/s, rmw enabled [19958.230481] raid6: using avx2x2 recovery algorithm [19958.236157] xor: automatically using best checksumming function avx [19958.272467] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [19959.950033] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [19963.520806] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [20631.207224] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [20636.077466] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [20773.713747] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [20777.304829] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [21348.098717] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [21349.409025] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [21349.416825] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [21349.420313] wlp1s0: authenticated [21349.424780] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [21349.432671] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [21349.434163] wlp1s0: associated [23483.566393] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [23491.917995] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: Rx/Tx [23491.920154] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [23495.751707] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [23497.905027] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [23530.030664] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: None [23530.032837] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [23534.365922] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [23662.281094] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [23665.869258] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [23763.886191] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [23774.744616] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: None [23774.746970] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [23778.559802] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [23888.205873] perf: interrupt took too long (2538 > 2500), lowering kernel.perf_event_max_sample_rate to 78750 [23907.878860] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [23910.858261] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [24607.780058] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [24637.429647] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: None [24637.431735] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [24641.238580] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [24725.630379] device wlp1s0 entered promiscuous mode [24725.670737] device wlp1s0 left promiscuous mode [24771.572585] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [24775.159312] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [24796.499448] device wlp1s0 entered promiscuous mode [24798.421982] device wlp1s0 left promiscuous mode [25599.868062] device enp0s31f6 entered promiscuous mode [25663.582910] device enp0s31f6 left promiscuous mode [26500.073831] wlp1s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [26506.376519] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [26506.527745] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [26506.610022] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [26510.215514] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [26510.223112] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [26510.229882] wlp1s0: authenticated [26510.230638] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [26510.238330] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [26510.243320] wlp1s0: associated [26510.315438] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [26511.401879] usb 1-8: USB disconnect, device number 3 [27727.441215] perf: interrupt took too long (3188 > 3172), lowering kernel.perf_event_max_sample_rate to 62500 [30532.208098] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [30534.020099] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [30534.027453] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [30534.034307] wlp1s0: authenticated [30534.037816] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [30534.045868] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [30534.046946] wlp1s0: associated [31668.394798] wlp1s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [31673.043992] PM: suspend entry (deep) [31673.055608] Filesystems sync: 0.011 seconds [31673.056145] Freezing user space processes ... (elapsed 0.002 seconds) done. [31673.058185] OOM killer disabled. [31673.058186] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [31673.059650] printk: Suspending console(s) (use no_console_suspend to debug) [31673.074809] e1000e: EEE TX LPI TIMER: 00000011 [31673.081477] sd 2:0:0:0: [sda] Synchronizing SCSI cache [31673.081576] sd 2:0:0:0: [sda] Stopping disk [31673.171342] ACPI: EC: interrupt blocked [31673.218476] ACPI: PM: Preparing to enter system sleep state S3 [31673.228381] ACPI: EC: event blocked [31673.228385] ACPI: EC: EC stopped [31673.228387] ACPI: PM: Saving platform NVS memory [31673.228492] Disabling non-boot CPUs ... [31673.230803] smpboot: CPU 1 is now offline [31673.235552] smpboot: CPU 2 is now offline [31673.238183] smpboot: CPU 3 is now offline [31673.243604] ACPI: PM: Low-level resume complete [31673.243654] ACPI: EC: EC started [31673.243655] ACPI: PM: Restoring platform NVS memory [31673.244400] Enabling non-boot CPUs ... [31673.244448] x86: Booting SMP configuration: [31673.244449] smpboot: Booting Node 0 Processor 1 APIC 0x2 [31673.247551] CPU1 is up [31673.247580] smpboot: Booting Node 0 Processor 2 APIC 0x1 [31673.248617] CPU2 is up [31673.248647] smpboot: Booting Node 0 Processor 3 APIC 0x3 [31673.249462] CPU3 is up [31673.251184] ACPI: PM: Waking up from system sleep state S3 [31673.358576] ACPI: EC: interrupt unblocked [31673.412063] ACPI: EC: event unblocked [31673.414536] sd 2:0:0:0: [sda] Starting disk [31673.415077] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [31673.415088] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [31673.415096] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [31673.678813] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [31673.728778] ata2: SATA link down (SStatus 0 SControl 300) [31673.729480] ata1: SATA link down (SStatus 4 SControl 300) [31673.729515] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [31673.739011] ata3.00: configured for UDMA/133 [31673.739210] ata3.00: Enabling discard_zeroes_data [31674.095156] usb 1-4: reset low-speed USB device number 5 using xhci_hcd [31674.389063] OOM killer enabled. [31674.389068] Restarting tasks ... done. [31674.408320] acpi PNP0401:00: Already enumerated [31674.412040] acpi PNP0501:00: Still not present [31674.421079] thermal thermal_zone7: failed to read out thermal zone (-61) [31674.469715] PM: suspend exit [31674.673614] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [31674.881151] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [31675.027796] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [31675.109992] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [31678.432321] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [31678.432453] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [31678.769256] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [31678.778075] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [31678.795317] wlp1s0: authenticated [31678.798707] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [31678.806931] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [31678.812435] wlp1s0: associated [31678.875821] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [31687.150495] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [31688.123814] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [31688.133533] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [31688.135154] wlp1s0: authenticated [31688.142563] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [31688.150817] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [31688.159945] wlp1s0: associated [31719.654999] wlp1s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [31719.739680] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [31719.751367] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [31719.759717] wlp1s0: authenticated [31719.762498] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [31719.770121] wlp1s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [31719.772010] wlp1s0: associated [32998.697947] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [33000.070813] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [33000.078306] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [33000.081161] wlp1s0: authenticated [33000.081952] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [33000.090424] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [33000.091666] wlp1s0: associated [33217.297466] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [33266.301532] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: Rx/Tx [33266.303593] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [33270.722189] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [33400.688477] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [33404.419020] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [33769.979685] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [33771.169256] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [33771.176556] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [33771.185027] wlp1s0: authenticated [33771.190758] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [33771.200861] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [33771.206803] wlp1s0: associated [37033.097644] perf: interrupt took too long (3988 > 3985), lowering kernel.perf_event_max_sample_rate to 50000 [39324.456654] wlp1s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [39328.967471] PM: suspend entry (deep) [39328.977197] Filesystems sync: 0.009 seconds [39328.978179] Freezing user space processes ... (elapsed 0.002 seconds) done. [39328.980697] OOM killer disabled. [39328.980700] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [39328.982353] printk: Suspending console(s) (use no_console_suspend to debug) [39328.997566] e1000e: EEE TX LPI TIMER: 00000011 [39329.000575] sd 2:0:0:0: [sda] Synchronizing SCSI cache [39329.001582] sd 2:0:0:0: [sda] Stopping disk [39329.074716] ACPI: EC: interrupt blocked [39329.121711] ACPI: PM: Preparing to enter system sleep state S3 [39329.132790] ACPI: EC: event blocked [39329.132794] ACPI: EC: EC stopped [39329.132796] ACPI: PM: Saving platform NVS memory [39329.132901] Disabling non-boot CPUs ... [39329.135162] smpboot: CPU 1 is now offline [39329.140090] smpboot: CPU 2 is now offline [39329.142582] smpboot: CPU 3 is now offline [39329.148718] ACPI: PM: Low-level resume complete [39329.148767] ACPI: EC: EC started [39329.148768] ACPI: PM: Restoring platform NVS memory [39329.149500] Enabling non-boot CPUs ... [39329.149547] x86: Booting SMP configuration: [39329.149548] smpboot: Booting Node 0 Processor 1 APIC 0x2 [39329.152659] CPU1 is up [39329.152687] smpboot: Booting Node 0 Processor 2 APIC 0x1 [39329.153571] CPU2 is up [39329.153599] smpboot: Booting Node 0 Processor 3 APIC 0x3 [39329.154463] CPU3 is up [39329.155964] ACPI: PM: Waking up from system sleep state S3 [39329.206568] ACPI: EC: interrupt unblocked [39329.256394] ACPI: EC: event unblocked [39329.259516] sd 2:0:0:0: [sda] Starting disk [39329.259871] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [39329.259881] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [39329.259888] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [39329.278855] xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit [39329.278865] usb usb1: root hub lost power or was reset [39329.278870] usb usb2: root hub lost power or was reset [39329.573791] ata1: SATA link down (SStatus 4 SControl 300) [39329.573828] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [39329.573868] ata2: SATA link down (SStatus 0 SControl 300) [39329.587512] ata3.00: configured for UDMA/133 [39329.588029] ata3.00: Enabling discard_zeroes_data [39329.921621] usb 1-4: reset low-speed USB device number 5 using xhci_hcd [39330.337455] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [39330.543442] OOM killer enabled. [39330.543445] Restarting tasks ... [39330.550470] acpi PNP0401:00: Already enumerated [39330.551746] acpi PNP0501:00: Still not present [39330.553534] done. [39330.562457] thermal thermal_zone7: failed to read out thermal zone (-61) [39330.686738] PM: suspend exit [39330.923190] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [39331.133282] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [39331.283523] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [39331.365066] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [39334.105848] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [39334.105909] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [39335.016142] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [39335.026060] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [39335.034219] wlp1s0: authenticated [39335.038487] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [39335.142544] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [39335.163044] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [39335.178405] wlp1s0: associated [39335.227656] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [39583.444699] device enp0s31f6 entered promiscuous mode [39846.805580] device enp0s31f6 left promiscuous mode [40123.634678] wlp1s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [40125.910203] PM: suspend entry (deep) [40125.953066] Filesystems sync: 0.042 seconds [40125.953969] Freezing user space processes ... (elapsed 0.202 seconds) done. [40126.156127] OOM killer disabled. [40126.156132] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [40126.158219] printk: Suspending console(s) (use no_console_suspend to debug) [40126.174351] e1000e: EEE TX LPI TIMER: 00000011 [40126.179459] sd 2:0:0:0: [sda] Synchronizing SCSI cache [40126.180270] sd 2:0:0:0: [sda] Stopping disk [40126.261218] ACPI: EC: interrupt blocked [40126.308531] ACPI: PM: Preparing to enter system sleep state S3 [40126.321160] ACPI: EC: event blocked [40126.321164] ACPI: EC: EC stopped [40126.321166] ACPI: PM: Saving platform NVS memory [40126.321270] Disabling non-boot CPUs ... [40126.323516] smpboot: CPU 1 is now offline [40126.328477] smpboot: CPU 2 is now offline [40126.331134] smpboot: CPU 3 is now offline [40126.337420] ACPI: PM: Low-level resume complete [40126.337471] ACPI: EC: EC started [40126.337471] ACPI: PM: Restoring platform NVS memory [40126.338196] Enabling non-boot CPUs ... [40126.338243] x86: Booting SMP configuration: [40126.338244] smpboot: Booting Node 0 Processor 1 APIC 0x2 [40126.341342] CPU1 is up [40126.341373] smpboot: Booting Node 0 Processor 2 APIC 0x1 [40126.342400] CPU2 is up [40126.342430] smpboot: Booting Node 0 Processor 3 APIC 0x3 [40126.343245] CPU3 is up [40126.344933] ACPI: PM: Waking up from system sleep state S3 [40126.391281] ACPI: EC: interrupt unblocked [40126.494936] ACPI: EC: event unblocked [40126.497797] sd 2:0:0:0: [sda] Starting disk [40126.498367] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [40126.498378] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [40126.498389] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [40126.764849] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [40126.810750] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [40126.811329] ata2: SATA link down (SStatus 0 SControl 300) [40126.811347] ata1: SATA link down (SStatus 4 SControl 300) [40126.818942] ata3.00: configured for UDMA/133 [40126.819195] ata3.00: Enabling discard_zeroes_data [40129.444042] OOM killer enabled. [40129.444049] Restarting tasks ... done. [40129.473699] acpi PNP0401:00: Already enumerated [40129.481693] acpi PNP0501:00: Still not present [40129.503733] thermal thermal_zone7: failed to read out thermal zone (-61) [40129.564958] PM: suspend exit [40129.733731] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [40129.752558] usb 1-3: new low-speed USB device number 6 using xhci_hcd [40129.909893] usb 1-3: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [40129.909918] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [40129.909930] usb 1-3: Product: USB Optical Mouse [40129.909939] usb 1-3: Manufacturer: Logitech [40129.914513] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C077.0003/input/input22 [40129.915547] hid-generic 0003:046D:C077.0003: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-3/input0 [40129.916049] usb 1-4: USB disconnect, device number 5 [40129.939297] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [40130.090573] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [40130.172992] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [40133.345151] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [40133.345211] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [40133.806998] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [40133.816764] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [40133.824556] wlp1s0: authenticated [40133.828594] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [40133.836415] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [40133.839640] wlp1s0: associated [40133.897502] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [41028.014764] device wlp1s0 entered promiscuous mode [41030.132019] device wlp1s0 left promiscuous mode [41092.173158] device wlp1s0 entered promiscuous mode [41095.199276] device wlp1s0 left promiscuous mode [41159.617100] device wlp1s0 entered promiscuous mode [41165.382120] device wlp1s0 left promiscuous mode [41168.331560] device wlp1s0 entered promiscuous mode [41382.766073] device wlp1s0 left promiscuous mode [41450.724794] device enp0s31f6 entered promiscuous mode [41474.863580] device enp0s31f6 left promiscuous mode [41756.966700] device enp0s31f6 entered promiscuous mode [41780.022437] device enp0s31f6 left promiscuous mode [41811.559177] device enp0s31f6 entered promiscuous mode [41813.587634] device enp0s31f6 left promiscuous mode [41837.577904] device wlp1s0 entered promiscuous mode [41840.608239] device wlp1s0 left promiscuous mode [41864.168794] device enp0s31f6 entered promiscuous mode [41867.221517] device enp0s31f6 left promiscuous mode [42158.754784] device enp0s31f6 entered promiscuous mode [42161.800256] device enp0s31f6 left promiscuous mode [42173.470981] wlp1s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [42178.262665] PM: suspend entry (deep) [42178.271167] Filesystems sync: 0.008 seconds [42178.271930] Freezing user space processes ... (elapsed 0.004 seconds) done. [42178.276664] OOM killer disabled. [42178.276665] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [42178.278033] printk: Suspending console(s) (use no_console_suspend to debug) [42178.292172] e1000e: EEE TX LPI TIMER: 00000011 [42178.296830] sd 2:0:0:0: [sda] Synchronizing SCSI cache [42178.296919] sd 2:0:0:0: [sda] Stopping disk [42178.374677] ACPI: EC: interrupt blocked [42178.421502] ACPI: PM: Preparing to enter system sleep state S3 [42178.431315] ACPI: EC: event blocked [42178.431319] ACPI: EC: EC stopped [42178.431321] ACPI: PM: Saving platform NVS memory [42178.431425] Disabling non-boot CPUs ... [42178.433693] smpboot: CPU 1 is now offline [42178.438238] smpboot: CPU 2 is now offline [42178.440647] smpboot: CPU 3 is now offline [42178.446558] ACPI: PM: Low-level resume complete [42178.446609] ACPI: EC: EC started [42178.446610] ACPI: PM: Restoring platform NVS memory [42178.447333] Enabling non-boot CPUs ... [42178.447383] x86: Booting SMP configuration: [42178.447384] smpboot: Booting Node 0 Processor 1 APIC 0x2 [42178.450492] CPU1 is up [42178.450521] smpboot: Booting Node 0 Processor 2 APIC 0x1 [42178.451453] CPU2 is up [42178.451483] smpboot: Booting Node 0 Processor 3 APIC 0x3 [42178.452349] CPU3 is up [42178.454037] ACPI: PM: Waking up from system sleep state S3 [42178.544557] ACPI: EC: interrupt unblocked [42178.589462] ACPI: EC: event unblocked [42178.592934] sd 2:0:0:0: [sda] Starting disk [42178.592955] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [42178.592970] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [42178.592982] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [42178.907756] ata2: SATA link down (SStatus 0 SControl 300) [42178.908536] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [42178.908553] ata1: SATA link down (SStatus 4 SControl 300) [42178.918093] ata3.00: configured for UDMA/133 [42178.918323] ata3.00: Enabling discard_zeroes_data [42178.998376] usb 1-3: reset low-speed USB device number 6 using xhci_hcd [42179.414417] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [42179.645469] OOM killer enabled. [42179.645472] Restarting tasks ... done. [42179.665072] acpi PNP0401:00: Already enumerated [42179.666063] acpi PNP0501:00: Still not present [42179.700795] thermal thermal_zone7: failed to read out thermal zone (-61) [42179.806491] PM: suspend exit [42180.006350] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [42180.240627] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [42180.390912] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [42180.472828] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [42184.108525] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [42184.115906] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [42184.121704] wlp1s0: authenticated [42184.125890] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [42184.133833] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [42184.136106] wlp1s0: associated [42184.206189] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [46469.820660] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [46471.539485] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [46471.547371] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [46471.550681] wlp1s0: authenticated [46471.554692] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [46471.562718] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [46471.564052] wlp1s0: associated [47842.826406] loop9: detected capacity change from 0 to 102072 [47845.187156] loop16: detected capacity change from 0 to 8 [47852.690330] loop11: detected capacity change from 0 to 129672 [49847.887972] wlp1s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [49850.784457] PM: suspend entry (deep) [49850.793419] Filesystems sync: 0.008 seconds [49850.794171] Freezing user space processes ... (elapsed 0.242 seconds) done. [49851.036722] OOM killer disabled. [49851.036727] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [49851.038863] printk: Suspending console(s) (use no_console_suspend to debug) [49851.051741] e1000e: EEE TX LPI TIMER: 00000011 [49851.056404] sd 2:0:0:0: [sda] Synchronizing SCSI cache [49851.057163] sd 2:0:0:0: [sda] Stopping disk [49851.153431] ACPI: EC: interrupt blocked [49851.201498] ACPI: PM: Preparing to enter system sleep state S3 [49851.211398] ACPI: EC: event blocked [49851.211402] ACPI: EC: EC stopped [49851.211404] ACPI: PM: Saving platform NVS memory [49851.211509] Disabling non-boot CPUs ... [49851.213768] smpboot: CPU 1 is now offline [49851.218169] smpboot: CPU 2 is now offline [49851.220923] smpboot: CPU 3 is now offline [49851.226850] ACPI: PM: Low-level resume complete [49851.226902] ACPI: EC: EC started [49851.226903] ACPI: PM: Restoring platform NVS memory [49851.227626] Enabling non-boot CPUs ... [49851.227671] x86: Booting SMP configuration: [49851.227672] smpboot: Booting Node 0 Processor 1 APIC 0x2 [49851.230810] CPU1 is up [49851.230838] smpboot: Booting Node 0 Processor 2 APIC 0x1 [49851.231884] CPU2 is up [49851.231914] smpboot: Booting Node 0 Processor 3 APIC 0x3 [49851.232720] CPU3 is up [49851.234403] ACPI: PM: Waking up from system sleep state S3 [49851.302840] ACPI: EC: interrupt unblocked [49851.364995] ACPI: EC: event unblocked [49851.367645] xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit [49851.367698] usb usb1: root hub lost power or was reset [49851.367703] usb usb2: root hub lost power or was reset [49851.368352] sd 2:0:0:0: [sda] Starting disk [49851.368520] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [49851.368530] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [49851.368538] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [49851.681785] ata1: SATA link down (SStatus 4 SControl 300) [49851.681824] ata2: SATA link down (SStatus 0 SControl 300) [49851.681858] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [49851.693584] ata3.00: configured for UDMA/133 [49851.694104] ata3.00: Enabling discard_zeroes_data [49852.012558] usb 1-3: reset low-speed USB device number 6 using xhci_hcd [49852.426005] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [49852.634230] OOM killer enabled. [49852.634233] Restarting tasks ... [49852.635698] acpi PNP0401:00: Already enumerated [49852.636558] acpi PNP0501:00: Still not present [49852.637892] done. [49852.661554] thermal thermal_zone7: failed to read out thermal zone (-61) [49852.721758] PM: suspend exit [49853.021180] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [49853.226006] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [49853.375589] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [49853.457890] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [49856.907716] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [49856.907795] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [49857.100277] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [49857.109752] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [49857.116842] wlp1s0: authenticated [49857.117687] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [49857.221856] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 2/3) [49857.243043] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [49857.249650] wlp1s0: associated [49857.320779] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [49888.910974] wlp1s0: disconnect from AP XX:XX:XX:XX:XX:XX for new auth to XX:XX:XX:XX:XX:XX [49888.974723] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [49888.983004] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [49888.992963] wlp1s0: authenticated [49888.993990] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [49889.001411] wlp1s0: RX ReassocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [49889.003899] wlp1s0: associated [49964.486979] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [49967.480501] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [50715.214105] device enp0s31f6 entered promiscuous mode [50718.259554] device enp0s31f6 left promiscuous mode [50733.536965] device enp0s31f6 entered promiscuous mode [50736.587746] device enp0s31f6 left promiscuous mode [50756.909119] device enp0s31f6 entered promiscuous mode [50759.979571] device enp0s31f6 left promiscuous mode [51401.580248] device enp0s31f6 entered promiscuous mode [51402.358726] device enp0s31f6 left promiscuous mode [52172.624089] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [52173.949715] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [52173.959284] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [52173.962506] wlp1s0: authenticated [52173.966549] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [52173.976268] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [52173.979039] wlp1s0: associated [53106.308325] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [53107.795088] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [53107.803785] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [53107.805917] wlp1s0: authenticated [53107.809225] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [53107.823681] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [53107.828105] wlp1s0: associated [55507.226647] device enp0s31f6 entered promiscuous mode [55508.246359] device enp0s31f6 left promiscuous mode [55534.289050] device enp0s31f6 entered promiscuous mode [55535.317863] device enp0s31f6 left promiscuous mode [55558.792014] device enp0s31f6 entered promiscuous mode [55559.808133] device enp0s31f6 left promiscuous mode [55624.645770] device enp0s31f6 entered promiscuous mode [55625.687817] device enp0s31f6 left promiscuous mode [55641.274524] device enp0s31f6 entered promiscuous mode [55642.291664] device enp0s31f6 left promiscuous mode [55677.464259] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55687.903818] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: Rx/Tx [55687.905906] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55692.310009] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [55695.612084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55705.416102] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [55705.416113] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55705.418213] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55707.901425] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55707.901449] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55707.960061] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55709.628386] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55709.628392] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55709.868090] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55711.537446] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55711.537472] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55711.644044] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55713.294049] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55713.294055] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55713.856039] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55715.740376] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55715.740399] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55715.848031] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55715.880276] device enp0s31f6 entered promiscuous mode [55716.907954] device enp0s31f6 left promiscuous mode [55717.570194] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55717.570200] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55717.703845] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55717.937863] device enp0s31f6 entered promiscuous mode [55718.963352] device enp0s31f6 left promiscuous mode [55719.372344] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55719.372370] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55719.564002] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55721.213348] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55721.213382] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55721.839819] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55723.545525] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55723.545550] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55723.615963] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55725.272303] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55725.272327] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55725.415703] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55727.086254] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55727.086260] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55727.383938] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55729.018060] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55729.018093] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55729.022106] device enp0s31f6 entered promiscuous mode [55729.763874] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55730.041213] device enp0s31f6 left promiscuous mode [55731.397266] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55731.397295] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55731.911867] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55733.547202] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55733.547227] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55733.867874] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55735.661183] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55735.661208] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55735.859374] device enp0s31f6 entered promiscuous mode [55736.199818] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55736.891393] device enp0s31f6 left promiscuous mode [55737.869158] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55737.869165] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55737.939792] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55739.647113] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55739.647120] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55739.739807] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55741.408024] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55741.408030] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55741.479766] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55742.602937] device enp0s31f6 entered promiscuous mode [55743.148970] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55743.148977] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55743.219712] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55743.618716] device enp0s31f6 left promiscuous mode [55744.888988] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55744.888995] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55745.007627] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55746.128227] device enp0s31f6 entered promiscuous mode [55746.674977] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55746.674983] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55747.158345] device enp0s31f6 left promiscuous mode [55748.416525] device enp0s31f6 entered promiscuous mode [55749.099714] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55749.453490] device enp0s31f6 left promiscuous mode [55750.769032] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55750.769056] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55750.823558] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55752.494012] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55752.494019] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55752.547669] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55754.184044] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55754.184068] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55754.279645] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55755.929969] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55755.929976] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55756.023628] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55757.673822] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55757.673846] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55757.739628] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55759.371923] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55759.371929] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55759.447591] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55761.372953] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55761.372978] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55761.475440] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55763.127879] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55763.127887] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55763.199558] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55764.850864] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55764.850872] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55764.927546] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55766.940702] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55766.940726] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55767.031545] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55768.663920] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55768.663945] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55768.755311] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55770.389860] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55770.389867] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55770.479282] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55772.131730] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55772.131737] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55773.495462] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55775.137767] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55775.137773] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55775.235453] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55776.902748] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55776.902754] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55776.987424] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55778.618730] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55778.618736] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55778.715396] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55780.348751] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55780.348776] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55780.423395] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55781.571723] device enp0s31f6 entered promiscuous mode [55782.167748] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55782.167779] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55782.287371] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55782.604622] device enp0s31f6 left promiscuous mode [55783.918722] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55783.918746] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55784.019371] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55785.672324] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55785.672329] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55785.731038] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55787.382490] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55787.382511] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55787.467101] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55789.119481] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55789.119499] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55789.179097] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55790.849452] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55790.849472] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55790.907304] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55791.195851] device enp0s31f6 entered promiscuous mode [55792.227726] device enp0s31f6 left promiscuous mode [55792.559585] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55792.559592] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55792.635292] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55793.800523] device enp0s31f6 entered promiscuous mode [55794.267573] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55794.267579] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55794.379032] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55794.829709] device enp0s31f6 left promiscuous mode [55796.013582] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55796.013589] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55796.095231] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55797.876585] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55797.876593] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55798.051213] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55799.775297] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55799.775333] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55800.155213] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55801.847553] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55801.847577] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55801.943187] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55803.585468] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55803.585475] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55803.687196] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55805.394480] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55805.394487] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55805.487133] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55807.120468] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55807.120473] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55807.203111] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55808.852452] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55808.852459] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55808.911115] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55810.583292] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55810.583327] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55810.674908] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55812.309256] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55812.309281] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55812.478808] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55812.505425] device enp0s31f6 entered promiscuous mode [55813.526761] device enp0s31f6 left promiscuous mode [55814.129430] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55814.129436] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55814.235060] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55815.941398] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55815.941418] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55816.006998] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55817.638124] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55817.638131] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55817.739046] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55819.061857] device enp0s31f6 entered promiscuous mode [55819.426339] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55819.426345] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55820.084886] device enp0s31f6 left promiscuous mode [55823.275506] device enp0s31f6 entered promiscuous mode [55824.306653] device enp0s31f6 left promiscuous mode [55856.154634] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55857.858272] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55857.858296] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55857.950643] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55859.617955] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55859.617978] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55859.690464] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55861.359934] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55861.359940] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55881.066204] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55882.698730] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55882.698736] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55882.790465] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [55884.499795] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [55884.499802] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO [55906.061772] device enp0s31f6 entered promiscuous mode [55907.094859] device enp0s31f6 left promiscuous mode [55908.941009] device enp0s31f6 entered promiscuous mode [55909.962324] device enp0s31f6 left promiscuous mode [56002.298009] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [56014.329701] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: None [56014.331842] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [56018.612968] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [56034.635860] device enp0s31f6 entered promiscuous mode [56035.668087] device enp0s31f6 left promiscuous mode [56038.406395] device enp0s31f6 entered promiscuous mode [56039.436250] device enp0s31f6 left promiscuous mode [56051.789809] device enp0s31f6 entered promiscuous mode [56052.820909] device enp0s31f6 left promiscuous mode [56058.239111] device enp0s31f6 entered promiscuous mode [56059.277573] device enp0s31f6 left promiscuous mode [56063.694357] device enp0s31f6 entered promiscuous mode [56064.725941] device enp0s31f6 left promiscuous mode [56237.738063] device enp0s31f6 entered promiscuous mode [56238.766459] device enp0s31f6 left promiscuous mode [56248.714033] device enp0s31f6 entered promiscuous mode [56249.747953] device enp0s31f6 left promiscuous mode [56450.238449] device enp0s31f6 entered promiscuous mode [56451.258641] device enp0s31f6 left promiscuous mode [56462.604577] device enp0s31f6 entered promiscuous mode [56463.628207] device enp0s31f6 left promiscuous mode [56482.543657] device enp0s31f6 entered promiscuous mode [56483.566647] device enp0s31f6 left promiscuous mode [56484.809652] device enp0s31f6 entered promiscuous mode [56485.839638] device enp0s31f6 left promiscuous mode [57127.566749] device enp0s31f6 entered promiscuous mode [57128.610184] device enp0s31f6 left promiscuous mode [58610.872313] perf: interrupt took too long (4989 > 4985), lowering kernel.perf_event_max_sample_rate to 40000 [59976.082724] device wlp1s0 entered promiscuous mode [60103.619825] device wlp1s0 left promiscuous mode [60124.234000] device wlp1s0 entered promiscuous mode [60124.259341] device wlp1s0 left promiscuous mode [61269.129335] device enp0s31f6 entered promiscuous mode [61288.662543] device enp0s31f6 left promiscuous mode [61316.419662] device enp0s31f6 entered promiscuous mode [61324.775088] device enp0s31f6 left promiscuous mode [61883.606711] device enp0s31f6 entered promiscuous mode [61900.975842] device enp0s31f6 left promiscuous mode [61918.323186] device enp0s31f6 entered promiscuous mode [61972.450000] device enp0s31f6 left promiscuous mode [62025.195226] device enp0s31f6 entered promiscuous mode [62035.149043] device enp0s31f6 left promiscuous mode [62168.119142] device enp0s31f6 entered promiscuous mode [62168.161718] device enp0s31f6 left promiscuous mode [64379.189229] device wlp1s0 entered promiscuous mode [64445.560577] device wlp1s0 left promiscuous mode [64467.406317] device enp0s31f6 entered promiscuous mode [64491.515494] device enp0s31f6 left promiscuous mode [64827.186626] device enp0s31f6 entered promiscuous mode [64827.254493] device enp0s31f6 left promiscuous mode [64847.098534] device enp0s31f6 entered promiscuous mode [64863.950968] device enp0s31f6 left promiscuous mode [64906.272790] device enp0s31f6 entered promiscuous mode [64923.472625] device enp0s31f6 left promiscuous mode [64956.802243] device enp0s31f6 entered promiscuous mode [64989.718577] device enp0s31f6 left promiscuous mode [65052.093380] device enp0s31f6 entered promiscuous mode [65154.304028] device wlp1s0 entered promiscuous mode [65154.321202] device wlp1s0 left promiscuous mode [65314.364112] device enp0s31f6 left promiscuous mode [65372.604369] device enp0s31f6 entered promiscuous mode [65764.516056] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [65766.161755] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [65766.172983] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [65766.175418] wlp1s0: authenticated [65766.179726] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [65766.190940] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [65766.202582] wlp1s0: associated [68041.838386] device wlp1s0 entered promiscuous mode [68046.602676] device wlp1s0 left promiscuous mode [69317.662590] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [69320.653202] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [69320.660646] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [69320.662220] wlp1s0: authenticated [69320.665975] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [69320.674091] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [69320.676492] wlp1s0: associated [70688.901406] device wlp1s0 entered promiscuous mode [70689.928124] device wlp1s0 left promiscuous mode [72236.497260] device wlp1s0 entered promiscuous mode [72236.516490] device wlp1s0 left promiscuous mode [73083.906728] device wlp1s0 entered promiscuous mode [73087.731011] device wlp1s0 left promiscuous mode [73107.984054] device wlp1s0 entered promiscuous mode [73115.416988] device wlp1s0 left promiscuous mode [73130.134924] device wlp1s0 entered promiscuous mode [73135.368414] device wlp1s0 left promiscuous mode [73619.981682] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [73671.317541] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: None [73671.319686] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [73674.913360] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [75926.595816] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [75941.281909] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: None [75941.284009] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [75944.945909] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [78266.661277] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [78268.282437] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [78268.290172] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [78268.291430] wlp1s0: authenticated [78268.294264] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [78268.302616] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [78268.304647] wlp1s0: associated [80970.140168] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [80971.629691] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [80971.637088] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [80971.638419] wlp1s0: authenticated [80971.642383] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [80971.650008] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [80971.651263] wlp1s0: associated [85591.446153] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [85594.277636] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [92508.554812] wlp1s0: deauthenticated from XX:XX:XX:XX:XX:XX (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [92508.742597] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [92508.753889] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [92508.756882] wlp1s0: authenticated [92508.760564] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [92508.770633] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [92508.777178] wlp1s0: associated [102205.382243] perf: interrupt took too long (6241 > 6236), lowering kernel.perf_event_max_sample_rate to 32000 [103118.478711] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [103120.260654] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [103120.268207] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [103120.269482] wlp1s0: authenticated [103120.273756] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [103120.281450] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [103120.283204] wlp1s0: associated [110333.730118] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [110336.710074] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [110336.717441] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [110336.718952] wlp1s0: authenticated [110336.719280] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [110336.727028] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [110336.728849] wlp1s0: associated [128587.259427] wlp1s0: Connection to AP XX:XX:XX:XX:XX:XX lost [128588.864742] wlp1s0: authenticate with XX:XX:XX:XX:XX:XX [128588.872528] wlp1s0: send auth to XX:XX:XX:XX:XX:XX (try 1/3) [128588.874732] wlp1s0: authenticated [128588.878556] wlp1s0: associate with XX:XX:XX:XX:XX:XX (try 1/3) [128588.888123] wlp1s0: RX AssocResp from XX:XX:XX:XX:XX:XX (capab=0x401 status=0 aid=1) [128588.891551] wlp1s0: associated [140937.517825] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [140941.613300] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [141003.337820] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Down [169820.804676] wlp1s0: deauthenticating from XX:XX:XX:XX:XX:XX by local choice (Reason: 3=DEAUTH_LEAVING) [169825.804089] PM: suspend entry (deep) [169825.815778] Filesystems sync: 0.011 seconds [169825.816400] Freezing user space processes ... (elapsed 0.002 seconds) done. [169825.818510] OOM killer disabled. [169825.818511] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [169825.819900] printk: Suspending console(s) (use no_console_suspend to debug) [169825.834138] e1000e: EEE TX LPI TIMER: 00000011 [169825.915258] sd 2:0:0:0: [sda] Synchronizing SCSI cache [169825.915936] sd 2:0:0:0: [sda] Stopping disk [169826.008485] ACPI: EC: interrupt blocked [169826.059758] ACPI: PM: Preparing to enter system sleep state S3 [169826.069604] ACPI: EC: event blocked [169826.069608] ACPI: EC: EC stopped [169826.069610] ACPI: PM: Saving platform NVS memory [169826.069711] Disabling non-boot CPUs ... [169826.073020] smpboot: CPU 1 is now offline [169826.077851] smpboot: CPU 2 is now offline [169826.081200] smpboot: CPU 3 is now offline [169826.097130] ACPI: PM: Low-level resume complete [169826.097221] ACPI: EC: EC started [169826.097224] ACPI: PM: Restoring platform NVS memory [169826.098855] Enabling non-boot CPUs ... [169826.099017] x86: Booting SMP configuration: [169826.099022] smpboot: Booting Node 0 Processor 1 APIC 0x2 [169826.115775] CPU1 is up [169826.115922] smpboot: Booting Node 0 Processor 2 APIC 0x1 [169826.121387] CPU2 is up [169826.121535] smpboot: Booting Node 0 Processor 3 APIC 0x3 [169826.126233] CPU3 is up [169826.134078] ACPI: PM: Waking up from system sleep state S3 [169826.375388] ACPI: EC: interrupt unblocked [169826.433925] ACPI: EC: event unblocked [169826.439932] sd 2:0:0:0: [sda] Starting disk [169826.440893] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it [169826.440924] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [169826.440939] i915 0000:00:02.0: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [169826.442326] xhci_hcd 0000:00:14.0: xHC error in resume, USBSTS 0x411, Reinit [169826.442390] usb usb1: root hub lost power or was reset [169826.442405] usb usb2: root hub lost power or was reset [169826.753692] ata2: SATA link down (SStatus 0 SControl 300) [169826.754875] ata1: SATA link down (SStatus 4 SControl 300) [169826.758770] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [169826.768752] ata3.00: configured for UDMA/133 [169826.769382] ata3.00: Enabling discard_zeroes_data [169826.950720] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [169829.626549] OOM killer enabled. [169829.626555] Restarting tasks ... done. [169829.657176] usb 1-3: USB disconnect, device number 6 [169829.657487] acpi PNP0401:00: Already enumerated [169829.664671] acpi PNP0501:00: Still not present [169829.679741] thermal thermal_zone7: failed to read out thermal zone (-61) [169829.740834] PM: suspend exit [169830.023045] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [169830.171845] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM [169830.254529] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring [169855.895648] PM: suspend entry (deep) Binary file (standard input) matches