[ 2.665031] device-mapper: uevent: version 1.0.3 [ 2.668019] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 2.747034] xor: automatically using best checksumming function avx [ 2.790028] raid6: sse2x4 gen() 4927 MB/s [ 2.816015] raid6: sse2x2 gen() 4943 MB/s [ 2.839015] raid6: sse2x1 gen() 4193 MB/s [ 2.839058] raid6: using algorithm sse2x2 gen() 4943 MB/s [ 2.862081] raid6: .... xor() 3181 MB/s, rmw enabled [ 2.862206] raid6: using ssse3x2 recovery algorithm [ 3.070034] Btrfs loaded, zoned=yes, fsverity=yes [ 3.147048] ACPI: bus type USB registered [ 3.147173] usbcore: registered new interface driver usbfs [ 3.147205] usbcore: registered new interface driver hub [ 3.147237] usbcore: registered new device driver usb [ 4.101048] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 4.101166] ACPI: button: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 [ 4.115024] ACPI: button: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 [ 4.121050] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 4.125048] ACPI: button: Power Button [PWRF] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no) [ 4.219056] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 4.254095] ehci-pci 0000:00:12.2: EHCI Host Controller [ 4.273335] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 4.273778] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 4.274205] ehci-pci 0000:00:12.2: debug port 1 [ 4.274625] ehci-pci 0000:00:12.2: irq 17, io mem 0xf024c000 [ 4.275041] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 4.275446] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 4.275845] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.276328] usb usb1: Product: EHCI Host Controller [ 4.276676] usb usb1: Manufacturer: Linux 6.10.1-desktop-1omv2490 ehci_hcd [ 4.277415] usb usb1: SerialNumber: ... [ 4.277891] hub 1-0:1.0: USB hub found [ 4.292593] hub 1-0:1.0: 4 ports detected [ 4.293090] ehci-pci 0000:00:13.2: EHCI Host Controller [ 4.293530] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 4.293939] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 4.294423] ehci-pci 0000:00:13.2: debug port 1 [ 4.294832] ehci-pci 0000:00:13.2: irq 17, io mem 0xf024a000 [ 4.295351] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 4.295760] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 4.296178] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.296525] usb usb2: Product: EHCI Host Controller [ 4.296866] usb usb2: Manufacturer: Linux 6.10.1-desktop-1omv2490 ehci_hcd [ 4.297222] usb usb2: SerialNumber: ... [ 4.297565] hub 2-0:1.0: USB hub found [ 4.297975] hub 2-0:1.0: 4 ports detected [ 4.320575] cryptd: max_cpu_qlen set to 1000 [ 4.362077] ACPI: bus type drm_connector registered [ 4.528022] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.692018] usb 2-1: New USB device found, idVendor=04f2, idProduct=b3f6, bcdDevice=29.53 [ 4.693719] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 4.694126] usb 2-1: Product: HD WebCam [ 4.694482] usb 2-1: Manufacturer: Chicony Electronics Co.,Ltd. [ 4.694829] usb 2-1: SerialNumber: ... [ 5.072074] psmouse serio1: synaptics: queried max coordinates: x [..5722], y [..4816] psmouse serio1: synaptics: queried min coordinates: x [1226..], y [1130..] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00273/0x240000/0xa2400/0x0, board id: 2729, fw id: 1454696 [ 5.214905] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 14.260282] ACPI: battery: Slot [BAT0] (battery present) [ 14.265314] wdat_wdt wdat_wdt: error -EBUSY: can't request region for resource [mem 0xfec000f0-0xfec000f3] wdat_wdt wdat_wdt: probe with driver wdat_wdt failed with error -16 [ 14.270041] sdhci: Secure Digital Host Controller Interface driver [ 14.270173] sdhci: Copyright(c) Pierre Ossman [ 14.270208] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 14.408399] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 14.408839] ohci-pci 0000:00:12.0: irq 18, io mem 0xf024d000 [ 14.410270] sdhci-pci 0000:01:00.1: SDHCI controller found [1969:3010] (rev 13) [ 14.410679] mmc0: SDHCI controller on PCI [0000:01:00.1] using ADMA [ 14.410711] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 14.411106] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4 [ 14.411479] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000010 [ 14.411849] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 14.412230] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 14.412600] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed [ 14.412980] AVX version of gcm_enc/dec engaged. [ 14.413021] AES CTR mode by8 optimization enabled [ 14.413052] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 14.413421] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 14.413746] usb usb4: Product: xHCI Host Controller [ 14.414075] usb usb4: Manufacturer: Linux 6.10.1-desktop-1omv2490 xhci-hcd [ 14.418753] usb usb4: SerialNumber: ... [ 14.419298] hub 4-0:1.0: USB hub found [ 14.419709] hub 4-0:1.0: 2 ports detected [ 14.420090] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 14.424918] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 14.425358] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 14.425679] usb usb5: Product: xHCI Host Controller [ 14.425996] usb usb5: Manufacturer: Linux 6.10.1-desktop-1omv2490 xhci-hcd [ 14.426339] usb usb5: SerialNumber: ... [ 14.426664] hub 5-0:1.0: USB hub found [ 14.427065] hub 5-0:1.0: 2 ports detected [ 14.427409] SCSI subsystem initialized [ 14.427457] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 14.427806] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 14.428165] usb usb3: Product: OHCI PCI host controller [ 14.428488] usb usb3: Manufacturer: Linux 6.10.1-desktop-1omv2490 ohci_hcd [ 14.428814] usb usb3: SerialNumber: ... [ 14.429153] hub 3-0:1.0: USB hub found [ 14.429550] hub 3-0:1.0: 4 ports detected [ 14.429894] Linux agpgart interface v0.103 [ 14.429926] libata version 3.00 loaded. [ 14.429974] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 14.466485] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6 [ 14.466898] ohci-pci 0000:00:13.0: irq 18, io mem 0xf024b000 [ 14.467291] ahci 0000:00:11.0: version 3.0 [ 14.467676] ahci 0000:00:11.0: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 14.468064] ahci 0000:00:11.0: 1/1 ports implemented (port mask 0x1) [ 14.468436] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part [ 14.468803] scsi host0: ahci [ 14.469182] ata1: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e100 irq 34 lpm-pol 0 [ 14.469215] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 14.469555] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 14.469866] usb usb6: Product: OHCI PCI host controller [ 14.470202] usb usb6: Manufacturer: Linux 6.10.1-desktop-1omv2490 ohci_hcd [ 14.471292] usb usb6: SerialNumber: ... [ 14.471601] hub 6-0:1.0: USB hub found [ 14.471958] hub 6-0:1.0: 4 ports detected [ 14.566044] usb 4-1: new low-speed USB device number 2 using xhci_hcd [ 14.652039] usb 3-1: new low-speed USB device number 2 using ohci-pci [ 14.700082] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 14.727057] usb 4-1: New USB device found, idVendor=1a81, idProduct=1705, bcdDevice= 0.01 [ 14.730879] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 14.731281] usb 4-1: Product: Wireless Mouse [ 14.731607] usb 4-1: Manufacturer: KYE [ 14.752111] hid: raw HID events driver (C) Jiri Kosina [ 14.824043] usb 3-1: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10 [ 14.826082] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 14.826413] usb 3-1: Product: USB Keykoard [ 14.826729] usb 3-1: Manufacturer: USB [ 14.884055] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 15.002072] ata1.00: ATA-8: TOSHIBA MQ01ACF050, AV002D, max UDMA/100 [ 15.002187] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 15.004075] ata1.00: configured for UDMA/100 [ 15.004119] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ACF0 2D PQ: 0 ANSI: 5 [ 15.039121] usb 6-2: New USB device found, idVendor=04ca, idProduct=300b, bcdDevice= 0.01 [ 15.041288] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 15.044422] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 15.137654] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 15.138103] sd 0:0:0:0: [sda] Write Protect is off [ 15.138472] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.138835] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.139212] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 15.139568] usbcore: registered new interface driver usbhid [ 15.139600] usbhid: USB HID core driver [ 15.139629] sda: sda1 [ 15.139659] sd 0:0:0:0: [sda] Attached SCSI disk [ 15.144039] usbcore: registered new interface driver usbkbd [ 15.147063] usbcore: registered new interface driver usbmouse [ 15.159045] input: KYE Wireless Mouse as /devices/pci0000:00/0000:00:10.0/usb4/4-1/4-1:1.0/0003:1A81:1705.0001/input/input8 [ 15.159185] input: KYE Wireless Mouse as /devices/pci0000:00/0000:00:10.0/usb4/4-1/4-1:1.0/0003:1A81:1705.0001/input/input9 [ 15.159220] input: KYE Wireless Mouse Consumer Control as /devices/pci0000:00/0000:00:10.0/usb4/4-1/4-1:1.0/0003:1A81:1705.0001/input/input10 [ 15.179075] [drm] radeon kernel modesetting enabled. [ 15.179217] radeon 0000:00:01.0: CIK support disabled by module param [ 15.211324] input: KYE Wireless Mouse System Control as /devices/pci0000:00/0000:00:10.0/usb4/4-1/4-1:1.0/0003:1A81:1705.0001/input/input11 [ 15.211425] hid-generic 0003:1A81:1705.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [KYE Wireless Mouse] on usb-0000:00:10.0-1/input0 [ 15.211958] input: USB USB Keykoard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:1C4F:0002.0002/input/input13 [ 15.264048] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:12.0-1/input0 [ 15.264807] input: USB USB Keykoard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:1C4F:0002.0003/input/input14 [ 15.317117] input: USB USB Keykoard System Control as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:1C4F:0002.0003/input/input15 [ 15.317235] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:12.0-1/input1 [ 16.229061] [drm] amdgpu kernel modesetting enabled. [ 16.233042] amdgpu: Virtual CRAT table created for CPU [ 16.233147] amdgpu: Topology: Add CPU node [ 16.233180] [drm] initializing kernel modesetting (KABINI 0x1002:0x9830 0x1025:0x076B 0x00). [ 16.233211] [drm] register mmio base: 0xF0200000 [ 16.233241] [drm] register mmio size: 262144 [ 16.233271] [drm] add ip block number 0 <cik_common> [ 16.233301] [drm] add ip block number 1 <gmc_v7_0> [ 16.233330] [drm] add ip block number 2 <cik_ih> [ 16.233360] [drm] add ip block number 3 <gfx_v7_0> [ 16.233389] [drm] add ip block number 4 <cik_sdma> [ 16.233418] [drm] add ip block number 5 <kv_dpm> [ 16.233448] [drm] add ip block number 6 <dce_v8_0> [ 16.233477] [drm] add ip block number 7 <uvd_v4_2> [ 16.233513] [drm] add ip block number 8 <vce_v2_0> [ 16.285085] [drm] BIOS signature incorrect 16 11 [ 16.285209] resource: resource sanity check: requesting [mem 0x00000000000c0000-0x00000000000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000cbfff window] caller amdgpu_read_bios+0x33/0xd0 [amdgpu] mapping multiple BARs [ 16.288042] amdgpu 0000:00:01.0: amdgpu: Fetched VBIOS from ROM BAR [ 18.467508] amdgpu: ATOM BIOS: 113-C53500-105 [ 18.467567] kfd kfd: amdgpu: KABINI not supported in kfd [ 18.467959] amdgpu 0000:00:01.0: vgaarb: deactivate vga console [ 18.468390] amdgpu 0000:00:01.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 18.468798] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 18.468833] amdgpu 0000:00:01.0: amdgpu: VRAM: 512M 0x0000000F00000000 - 0x0000000F1FFFFFFF (512M used) [ 18.469246] amdgpu 0000:00:01.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 18.469617] [drm] Detected VRAM RAM=512M, BAR=512M [ 18.469648] [drm] RAM width 64bits UNKNOWN [ 18.469678] [drm] amdgpu: 512M of VRAM memory ready [ 18.469709] [drm] amdgpu: 3699M of GTT memory ready. [ 18.469739] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 18.469769] [drm] PCIE GART of 1024M enabled (table at 0x0000000F00600000). [ 18.469799] [drm] Internal thermal controller without fan control [ 18.469829] [drm] amdgpu: dpm initialized [ 18.469858] [drm] amdgpu atom DIG backlight initialized [ 18.469897] [drm] AMDGPU Display Connectors [ 18.469926] [drm] Connector 0: [ 18.469955] [drm] eDP-1 [ 18.469984] [drm] HPD1 [ 18.470024] [drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f [ 18.470055] [drm] Encoders: [ 18.470083] [drm] LCD1: INTERNAL_UNIPHY [ 18.470112] [drm] Connector 1: [ 18.470141] [drm] HDMI-A-1 [ 18.470169] [drm] HPD2 [ 18.470199] [drm] DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953 [ 18.470228] [drm] Encoders: [ 18.470265] [drm] DFP1: INTERNAL_UNIPHY [ 18.470295] [drm] Connector 2: [ 18.470325] [drm] VGA-1 [ 18.470354] [drm] DDC: 0x1970 0x1970 0x1971 0x1971 0x1972 0x1972 0x1973 0x1973 [ 18.470384] [drm] Encoders: [ 18.470412] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 18.470441] [drm] Found UVD firmware Version: 1.64 Family ID: 9 [ 18.470471] [drm] Found VCE firmware Version: 50.10 Binary ID: 2 [ 18.470501] [drm] UVD initialized successfully. [ 18.470530] [drm] VCE initialized successfully. [ 18.470559] amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 2, active_cu_number 2 [ 18.470974] amdgpu 0000:00:01.0: amdgpu: overdrive feature is not supported [ 18.471358] amdgpu 0000:00:01.0: amdgpu: Runtime PM not available [ 18.472776] [drm] Initialized amdgpu 3.57.0 20150101 for 0000:00:01.0 on minor 0 [ 18.472815] fbcon: amdgpudrmfb (fb0) is primary device [ 18.472846] Console: switching to colour frame buffer device 170x48 [ 18.472877] amdgpu 0000:00:01.0: [drm] fb0: amdgpudrmfb frame buffer device [ 18.961065] EXT4-fs (sda1): orphan cleanup on readonly fs [ 18.962042] EXT4-fs (sda1): mounted filesystem HASH_CE3-FA82-4ACF-4728-8D8F4F2F068B ro with ordered data mode. Quota mode: none. [ 28.683155] zram0: detected capacity change from 0 to 7576576 [ 28.683309] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20240322/utaddress-204) [ 28.683458] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 28.683592] thermal LNXTHERM:00: registered as thermal_zone0 [ 28.684790] ACPI: thermal: Thermal Zone [TZS0] (45 C) [ 28.684912] thermal LNXTHERM:01: registered as thermal_zone1 [ 28.685911] ACPI: thermal: Thermal Zone [TZS1] (27 C) [ 28.686085] ACPI: AC: AC Adapter [ADP1] (on-line) [ 28.686225] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [48B0F61E6FF46398897819E3AA5CFA88] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 28.687064] acpi_cpufreq: overriding BIOS provided _PSD data [ 28.687110] mc: Linux media interface: v0.10 [ 28.687159] EDAC MC: Ver: 3.0.0 [ 28.687208] MCE: In-kernel MCE decoding enabled. [ 28.687257] acer_wmi: Acer Laptop ACPI-WMI Extras [ 28.687310] acer_wmi: Function bitmap for Communication Button: 0x801 [ 28.687355] videodev: Linux video capture interface: v2.00 [ 28.687413] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input16 [ 28.687468] input: Acer WMI hotkeys as /devices/virtual/input/input17 [ 28.687511] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 28.687900] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 28.688257] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 28.688597] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 28.688916] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 28.689290] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1b [ 28.689617] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 28.689675] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 28.689748] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 28.689793] Adding 3788284k swap on /dev/zram0. Priority:100 extents:1 across:3788284k SSDsc [ 28.689844] Bluetooth: Core ver 2.22 [ 28.689897] NET: Registered PF_BLUETOOTH protocol family [ 28.689945] Bluetooth: HCI device and connection manager initialized [ 28.689990] Bluetooth: HCI socket layer initialized [ 28.690052] Bluetooth: L2CAP socket layer initialized [ 28.690101] Bluetooth: SCO socket layer initialized [ 28.690144] usb 2-1: Found UVC 1.00 device HD WebCam (04f2:b3f6) [ 28.690664] usbcore: registered new interface driver uvcvideo [ 28.690713] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input18 [ 28.690777] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input19 [ 28.690832] usbcore: registered new interface driver btusb [ 28.940039] alx 0000:01:00.0 enp1s0f0: renamed from eth0 [ 29.338084] usb 6-2: USB disconnect, device number 2 [ 29.339892] usbcore: registered new interface driver ath3k [ 29.812076] usb 6-2: new full-speed USB device number 3 using ohci-pci [ 31.517057] ath: phy0: WB335 2-ANT card detected [ 31.517246] ath: phy0: Set BT/WLAN RX diversity capability [ 31.524062] ath: phy0: Enable LNA combining [ 31.525041] ath: phy0: ASPM enabled: 0x42 [ 31.525140] ath: EEPROM regdomain: 0x65 [ 31.525205] ath: EEPROM indicates we should expect a direct regpair map [ 31.525257] ath: Country alpha2 being used: 00 [ 31.525307] ath: Regpair used: 0x65 [ 31.527082] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 31.528231] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0x00000000b4c0fd44, irq=41 [ 31.739343] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0 [ 35.110036] usb 6-2: device descriptor read/64, error -110 [ 35.355032] usb 6-2: new full-speed USB device number 4 using ohci-pci [ 35.819032] NET: Registered PF_PACKET protocol family [ 40.759139] usb 6-2: New USB device found, idVendor=04ca, idProduct=300b, bcdDevice= 0.02 [ 40.762257] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 41.180039] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 41.180187] Bluetooth: BNEP filters: protocol multicast [ 41.180277] Bluetooth: BNEP socket layer initialized [ 41.198323] Bluetooth: MGMT ver 1.22 [ 42.817046] Bluetooth: RFCOMM TTY layer initialized [ 42.817180] Bluetooth: RFCOMM socket layer initialized [ 42.817283] Bluetooth: RFCOMM ver 1.11 [ 92.589092] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 267.345527] wlp5s0: authenticate with 21DEEC9BF13324E5A4235CD61F497E1F (local address=B197187FAE286633500AA6108E6B458B) [ 267.345772] wlp5s0: send auth to 21DEEC9BF13324E5A4235CD61F497E1F (try 1/3) [ 267.348022] wlp5s0: authenticated [ 267.350032] wlp5s0: associate with 21DEEC9BF13324E5A4235CD61F497E1F (try 1/3) [ 267.356426] wlp5s0: RX AssocResp from 21DEEC9BF13324E5A4235CD61F497E1F (capab=0x431 status=0 aid=1) [ 267.356739] wlp5s0: associated [ 267.356858] ath: EEPROM regdomain: 0x807c [ 267.357040] ath: EEPROM indicates we should expect a country code [ 267.357189] ath: doing EEPROM country->regdmn map search [ 267.357359] ath: country maps to regdmn code: 0x3a [ 267.357489] ath: Country alpha2 being used: CA [ 267.357604] ath: Regpair used: 0x3a [ 267.357717] ath: regdomain 0x807c dynamically updated by country element [ 267.407047] wlp5s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 21DEEC9BF13324E5A4235CD61F497E1F [ 429.058054] Non-volatile memory driver v1.3 [ 429.530501] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 429.576045] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 443.145094] amdgpu 0000:00:01.0: amdgpu: Disabling VM faults because of PRT request! [78510.613086] wlp5s0: deauthenticated from 21DEEC9BF13324E5A4235CD61F497E1F (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [78510.669490] wlp5s0: authenticate with 21DEEC9BF13324E5A4235CD61F497E1F (local address=B197187FAE286633500AA6108E6B458B) [78510.669732] wlp5s0: send auth to 21DEEC9BF13324E5A4235CD61F497E1F (try 1/3) [78510.674044] wlp5s0: authenticated [78510.674127] wlp5s0: associate with 21DEEC9BF13324E5A4235CD61F497E1F (try 1/3) [78510.679138] wlp5s0: RX AssocResp from 21DEEC9BF13324E5A4235CD61F497E1F (capab=0x431 status=0 aid=1) [78510.679311] wlp5s0: associated [78510.679367] ath: EEPROM regdomain: 0x807c [78510.679424] ath: EEPROM indicates we should expect a country code [78510.679494] ath: doing EEPROM country->regdmn map search [78510.679531] ath: country maps to regdmn code: 0x3a [78510.679575] ath: Country alpha2 being used: CA [78510.679622] ath: Regpair used: 0x3a [78510.679657] ath: regdomain 0x807c dynamically updated by country element [78510.687035] wlp5s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 21DEEC9BF13324E5A4235CD61F497E1F [78823.254092] wlp5s0: deauthenticated from 21DEEC9BF13324E5A4235CD61F497E1F (Reason: 7=CLASS3_FRAME_FROM_NONASSOC_STA) [78823.312022] wlp5s0: authenticate with 21DEEC9BF13324E5A4235CD61F497E1F (local address=B197187FAE286633500AA6108E6B458B) [78823.312127] wlp5s0: send auth to 21DEEC9BF13324E5A4235CD61F497E1F (try 1/3) [78823.359067] wlp5s0: authenticated [78823.359150] wlp5s0: associate with 21DEEC9BF13324E5A4235CD61F497E1F (try 1/3) [78823.364119] wlp5s0: RX AssocResp from 21DEEC9BF13324E5A4235CD61F497E1F (capab=0x431 status=0 aid=1) [78823.364359] wlp5s0: associated [78823.364420] ath: EEPROM regdomain: 0x807c [78823.364482] ath: EEPROM indicates we should expect a country code [78823.364544] ath: doing EEPROM country->regdmn map search [78823.364606] ath: country maps to regdmn code: 0x3a [78823.364666] ath: Country alpha2 being used: CA [78823.364728] ath: Regpair used: 0x3a [78823.364774] ath: regdomain 0x807c dynamically updated by country element [78823.457063] wlp5s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 21DEEC9BF13324E5A4235CD61F497E1F [87576.225128] usb 3-1: USB disconnect, device number 2 [97004.904053] wlp5s0: deauthenticating from 21DEEC9BF13324E5A4235CD61F497E1F by local choice (Reason: 3=DEAUTH_LEAVING) [97005.591150] zram0: detected capacity change from 7576576 to 0