[ 1.352761] i2c_dev: i2c /dev entries driver [ 1.395740] SCSI subsystem initialized [ 1.420985] device-mapper: uevent: version 1.0.3 [ 1.421094] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 2.005672] xor: measuring software checksum speed [ 2.006492] prefetch64-sse : 12126 MB/sec [ 2.008282] generic_sse : 10453 MB/sec [ 2.008286] xor: using function: prefetch64-sse (12126 MB/sec) [ 2.042684] raid6: sse2x4 gen() 7368 MB/s [ 2.068660] raid6: sse2x2 gen() 7075 MB/s [ 2.092660] raid6: sse2x1 gen() 5428 MB/s [ 2.092663] raid6: using algorithm sse2x4 gen() 7368 MB/s [ 2.118660] raid6: .... xor() 1366 MB/s, rmw enabled [ 2.118663] raid6: using ssse3x2 recovery algorithm [ 2.242722] Btrfs loaded, zoned=yes, fsverity=yes [ 2.281685] ACPI: bus type USB registered [ 2.281750] usbcore: registered new interface driver usbfs [ 2.281767] usbcore: registered new interface driver hub [ 2.281788] usbcore: registered new device driver usb [ 3.189237] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/PNP0C09:01/PNP0C0C:00/input/input1 [ 3.211381] ACPI: button: Power Button [PWRB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/PNP0C09:01/PNP0C0D:01/input/input2 [ 3.213460] ACPI: button: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 3.213968] ACPI: button: Sleep Button [SLPB] ACPI: battery: Slot [BAT0] (battery present) [ 3.348384] Linux agpgart interface v0.103 [ 3.397252] cryptd: max_cpu_qlen set to 1000 [ 3.431591] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002) [ 3.579310] libata version 3.00 loaded. [ 3.660015] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 3.660031] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 [ 3.693367] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 3.694894] xhci_hcd 0000:00:15.0: xHCI Host Controller [ 3.694909] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 [ 3.694916] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed [ 3.695033] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 3.695041] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.695044] usb usb1: Product: xHCI Host Controller [ 3.695046] usb usb1: Manufacturer: Linux 6.6.2-desktop-1omv2390 xhci-hcd [ 3.695048] usb usb1: SerialNumber: ... [ 3.700862] hub 1-0:1.0: USB hub found [ 3.700888] hub 1-0:1.0: 8 ports detected [ 3.722187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 3.722197] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 3.722200] usb usb2: Product: xHCI Host Controller [ 3.722202] usb usb2: Manufacturer: Linux 6.6.2-desktop-1omv2390 xhci-hcd [ 3.722204] usb usb2: SerialNumber: ... [ 3.722720] hub 2-0:1.0: USB hub found [ 3.722740] hub 2-0:1.0: 7 ports detected [ 3.723051] usb: port power management may be unreliable [ 3.761115] SSE version of gcm_enc/dec engaged. [ 3.791366] sdhci: Secure Digital Host Controller Interface driver [ 3.791374] sdhci: Copyright(c) Pierre Ossman [ 3.792804] ACPI: bus type drm_connector registered [ 3.812887] ahci 0000:00:12.0: version 3.0 [ 3.833710] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 3.833724] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst [ 3.841739] scsi host0: ahci [ 3.846596] scsi host1: ahci [ 3.846805] ata1: SATA max UDMA/133 abar m2048@0x91325000 port 0x91325100 irq 127 [ 3.846811] ata2: SATA max UDMA/133 abar m2048@0x91325000 port 0x91325180 irq 127 [ 3.867792] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b) [ 3.868433] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit [ 3.869755] hid: raw HID events driver (C) Jiri Kosina [ 3.956665] usb 1-4: new full-speed USB device number 2 using xhci_hcd [ 3.960794] mmc1: new HS400 MMC card at address 0001 [ 4.084483] usb 1-4: New USB device found, idVendor=13d3, idProduct=3490, bcdDevice= 0.01 [ 4.084489] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 4.162670] ata2: SATA link down (SStatus 4 SControl 300) [ 4.200660] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 4.320667] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.320793] ata1.00: ATA-10: V Series SATA SSD 120GB, V4.12, max UDMA/133 [ 4.320953] ata1.00: NCQ Send/Recv Log not supported [ 4.320956] ata1.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 4.321261] ata1.00: NCQ Send/Recv Log not supported [ 4.321266] ata1.00: configured for UDMA/133 [ 4.321458] scsi 0:0:0:0: Direct-Access ATA V Series SATA SS 2 PQ: 0 ANSI: 5 [ 4.353715] usb 1-5: New USB device found, idVendor=04f2, idProduct=b52b, bcdDevice=95.52 [ 4.353726] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 4.353729] usb 1-5: Product: USB2.0 VGA UVC WebCam [ 4.353732] usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd. [ 4.353734] usb 1-5: SerialNumber: ... [ 4.360239] mmcblk1: mmc1:0001 BJNB4R 29.1 GiB [ 4.384390] mmcblk1: p1 p2 [ 4.384797] mmcblk1boot0: mmc1:0001 BJNB4R 4.00 MiB [ 4.386067] mmcblk1boot1: mmc1:0001 BJNB4R 4.00 MiB [ 4.387520] mmcblk1rpmb: mmc1:0001 BJNB4R 4.00 MiB, chardev (241:0) [ 4.406287] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 4.406310] sd 0:0:0:0: [sda] Write Protect is off [ 4.406314] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.406336] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.406367] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 4.408454] sda: sda1 sda2 sda3 [ 4.408721] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.842383] EXT4-fs (mmcblk1p2): orphan cleanup on readonly fs [ 4.843173] EXT4-fs (mmcblk1p2): mounted filesystem HASH_2AD-55C7-11D9-C87B-8DA9AF2CB799 ro with ordered data mode. Quota mode: none. [ 4.920186] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.921314] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.926538] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7) [ 6.115729] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 6.118276] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.118618] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 6.120822] fbcon: i915drmfb (fb0) is primary device [ 6.130423] Console: switching to colour frame buffer device 170x48 [ 6.150204] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 7.451957] fuse: init (API version 7.39) [ 7.472082] EXT4-fs (mmcblk1p2): re-mounted HASH_2AD-55C7-11D9-C87B-8DA9AF2CB799 r/w. Quota mode: none. [ 7.513577] Adding 524284k swap on /swapfile. Priority:-2 extents:7 across:786432k SS [ 7.905748] zram0: detected capacity change from 0 to 3885056 [ 7.969566] Adding 1942524k swap on /dev/zram0. Priority:100 extents:1 across:1942524k SSDsc [ 8.164181] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5 [ 8.245851] FAT-fs (mmcblk1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 8.296828] ACPI: AC: AC Adapter [AC0] (off-line) [ 8.312972] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80 [ 8.312996] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80 [ 8.319880] Consider using thermal netlink events interface [ 8.498253] thermal LNXTHERM:00: registered as thermal_zone2 [ 8.498262] ACPI: thermal: Thermal Zone [THRM] (35 C) [ 8.726127] intel-lpss 0000:00:16.0: Failed to create debugfs entries [ 8.726327] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 8.727309] intel-lpss 0000:00:17.0: Failed to create debugfs entries [ 8.727471] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 8.750997] pci 0000:00:0d.0: [8086:5a92] type 00 class 0x058000 [ 8.751065] pci 0000:00:0d.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit] pci 0000:00:0d.2: [8086:5a96] type 00 class 0x0c8000 [ 8.752697] pci 0000:00:0d.2: reg 0x10: [mem 0xfed01000-0xfed01fff] i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A [ 8.820834] i801_smbus 0000:00:1f.1: PCI INT A: not connected [ 8.820859] i801_smbus 0000:00:1f.1: SPD Write Disable is set [ 8.820878] i801_smbus 0000:00:1f.1: SMBus using polling [ 8.822566] i2c i2c-4: 1/2 memory slots populated (from DMI) [ 8.943901] r8169 0000:01:00.2 eth0: RTL8402, F164B04CD0A5DBFAB88684DB5B657ADF, XID 440, IRQ 129 [ 8.977640] mc: Linux media interface: v0.10 [ 8.992962] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.004997] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.012864] asus_wmi: ASUS WMI generic driver loaded [ 9.126972] dbus-broker-lau[642]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 9.202234] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 9.202242] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 9.202244] RAPL PMU: hw unit of domain package 2^-14 Joules [ 9.202245] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 9.202246] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 9.203043] asus_wmi: Initialization: 0x1 [ 9.203098] asus_wmi: BIOS WMI version: 9.0 [ 9.203133] asus_wmi: SFUN value: 0x21 [ 9.203137] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS [ 9.203141] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue [ 9.217859] Bluetooth: Core ver 2.22 [ 9.217905] NET: Registered PF_BLUETOOTH protocol family [ 9.217907] Bluetooth: HCI device and connection manager initialized [ 9.217915] Bluetooth: HCI socket layer initialized [ 9.217918] Bluetooth: L2CAP socket layer initialized [ 9.217921] Bluetooth: SCO socket layer initialized [ 9.244521] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input6 [ 9.251881] asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19 [ 9.252040] asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19 [ 9.252192] asus_wmi: fan_curve_get_factory_default (0x00110032) failed: -19 [ 9.516671] intel_rapl_common: Found RAPL domain package [ 9.516680] intel_rapl_common: Found RAPL domain core [ 9.516683] intel_rapl_common: Found RAPL domain uncore [ 9.516686] intel_rapl_common: Found RAPL domain dram [ 9.677887] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 9.801676] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 9.801689] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.801692] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 9.801695] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 9.801697] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 9.801699] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 9.801702] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x1b [ 9.801704] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13 [ 9.942489] videodev: Linux video capture interface: v2.00 [ 10.003636] usbcore: registered new interface driver btusb [ 10.062982] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7 [ 10.063085] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8 [ 10.063184] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9 [ 10.063270] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10 [ 10.120020] r8169 0000:01:00.2 enp1s0f2: renamed from eth0 [ 10.322577] usb 1-4: USB disconnect, device number 2 [ 10.326050] usbcore: registered new interface driver ath3k [ 10.478963] input: ELAN1200:00 04F3:3045 Mouse as /devices/pci0000:00/0000:00:17.0/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3045.0001/input/input11 [ 10.487034] input: ELAN1200:00 04F3:3045 Touchpad as /devices/pci0000:00/0000:00:17.0/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3045.0001/input/input12 [ 10.487363] hid-generic 0018:04F3:3045.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3045] on i2c-ELAN1200:00 [ 10.495109] intel_telemetry_core Init [ 10.581689] usb 1-4: new full-speed USB device number 4 using xhci_hcd [ 10.597966] spi-nor spi0.0: w25q64dw (8192 Kbytes) [ 10.642370] Creating 1 MTD partitions on "intel-spi": [ 10.642383] 0x000000000000-0x0000007ff000 : "BIOS" [ 10.652911] Invalid pltconfig, ensure IPC1 device is enabled in BIOS [ 10.671852] input: ELAN1200:00 04F3:3045 Mouse as /devices/pci0000:00/0000:00:17.0/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3045.0001/input/input13 [ 10.672317] input: ELAN1200:00 04F3:3045 Touchpad as /devices/pci0000:00/0000:00:17.0/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3045.0001/input/input14 [ 10.673158] hid-multitouch 0018:04F3:3045.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3045] on i2c-ELAN1200:00 [ 10.701159] Invalid pltconfig, ensure IPC1 device is enabled in BIOS [ 10.709139] usb 1-4: New USB device found, idVendor=13d3, idProduct=3490, bcdDevice= 0.02 [ 10.709154] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 10.748995] usb 1-5: Found UVC 1.00 device USB2.0 VGA UVC WebCam (04f2:b52b) [ 10.766281] usbcore: registered new interface driver uvcvideo [ 10.785361] EDAC MC: Ver: 3.0.0 [ 10.877552] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0 [ 10.877602] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0 [ 10.877644] EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0 [ 10.880729] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0 [ 10.880781] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0 [ 10.880823] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0 [ 10.880865] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0 [ 10.880946] EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0 [ 10.880988] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0 [ 10.881030] EDAC pnd2: d_cr_drp0=08000c017 ret=0 [ 10.881071] EDAC pnd2: d_cr_drp0=000000000 ret=2 [ 10.881112] EDAC pnd2: d_cr_drp0=000000000 ret=2 [ 10.881153] EDAC pnd2: d_cr_drp0=000000000 ret=2 [ 10.881155] EDAC pnd2: ECC disabled on channel 0 [ 10.881156] EDAC pnd2: Failed to register device with error -22. [ 11.070674] ath9k 0000:02:00.0: enabling device (0000 -> 0002) [ 11.070892] ath: phy0: Set BT/WLAN RX diversity capability [ 11.115429] ath: phy0: Enable LNA combining [ 11.125390] ath: phy0: ASPM enabled: 0x43 [ 11.125404] ath: EEPROM regdomain: 0x6a [ 11.125405] ath: EEPROM indicates we should expect a direct regpair map [ 11.125408] ath: Country alpha2 being used: 00 [ 11.125409] ath: Regpair used: 0x6a [ 11.133668] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.139537] ieee80211 phy0: Atheros AR9565 Rev:2 mem=0x000000008bd728bb, irq=23 [ 11.193588] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 [ 11.208232] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.208241] Bluetooth: BNEP filters: protocol multicast [ 11.208249] Bluetooth: BNEP socket layer initialized [ 11.217342] Bluetooth: MGMT ver 1.22 [ 11.892333] RTL8208 Fast Ethernet r8169-0-102:00: attached PHY driver (mii_bus:phy_addr=r8169-0-102:00, irq=MAC) [ 12.072322] r8169 0000:01:00.2 enp1s0f2: Link is Down [ 12.300535] NET: Registered PF_PACKET protocol family [ 13.593648] wlp2s0: authenticate with 3C8B7350E7C028AC7E9C63B2B8A0BFF2 [ 13.593777] wlp2s0: 80 MHz not supported, disabling VHT [ 13.625823] wlp2s0: send auth to 3C8B7350E7C028AC7E9C63B2B8A0BFF2 (try 1/3) [ 13.627912] wlp2s0: authenticated [ 13.652676] wlp2s0: associate with 3C8B7350E7C028AC7E9C63B2B8A0BFF2 (try 1/3) [ 13.656749] wlp2s0: RX AssocResp from 3C8B7350E7C028AC7E9C63B2B8A0BFF2 (capab=0x1411 status=0 aid=5) [ 13.656928] wlp2s0: associated [ 13.657064] ath: EEPROM regdomain: 0x833a [ 13.657066] ath: EEPROM indicates we should expect a country code [ 13.657068] ath: doing EEPROM country->regdmn map search [ 13.657069] ath: country maps to regdmn code: 0x37 [ 13.657071] ath: Country alpha2 being used: GB [ 13.657072] ath: Regpair used: 0x37 [ 13.657073] ath: regdomain 0x833a dynamically updated by country element [ 13.752112] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 3C8B7350E7C028AC7E9C63B2B8A0BFF2 [ 14.214554] Bluetooth: RFCOMM TTY layer initialized [ 14.214570] Bluetooth: RFCOMM socket layer initialized [ 14.214572] Bluetooth: RFCOMM ver 1.11 [ 46.927762] warning: `kded5' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 76.821100] usb 1-2: new high-speed USB device number 6 using xhci_hcd [ 76.951099] usb 1-2: New USB device found, idVendor=0930, idProduct=6544, bcdDevice= 1.00 [ 76.951114] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 76.951120] usb 1-2: Product: TransMemory [ 76.951125] usb 1-2: Manufacturer: TOSHIBA [ 76.951130] usb 1-2: SerialNumber: ... [ 76.990160] usb-storage 1-2:1.0: USB Mass Storage device detected [ 76.991926] scsi host2: usb-storage 1-2:1.0 [ 76.993154] usbcore: registered new interface driver usb-storage [ 77.003470] usbcore: registered new interface driver uas [ 78.066808] scsi 2:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4 [ 78.070332] sd 2:0:0:0: [sdb] 60594432 512-byte logical blocks: (31.0 GB/28.9 GiB) [ 78.071002] sd 2:0:0:0: [sdb] Write Protect is off [ 78.071007] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 00 [ 78.071218] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 78.074069] sdb: sdb2 [ 78.074304] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 86.943853] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 86.947197] FAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 457.581704] Non-volatile memory driver v1.3 [ 457.859286] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 457.949781] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 457.949850] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 459.711000] rtsx_pci 0000:01:00.0: VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update [ 459.717935] r8169 0000:01:00.2: invalid VPD tag 0x00 (size 0) at offset 0; assume missing optional EEPROM [ 1089.072831] sdb: detected capacity change from 60594432 to 0 [ 1347.235234] usb 1-2: USB disconnect, device number 6 [ 1347.995641] usb 1-2: new high-speed USB device number 7 using xhci_hcd [ 1348.124887] usb 1-2: New USB device found, idVendor=0930, idProduct=6544, bcdDevice= 1.00 [ 1348.124902] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1348.124908] usb 1-2: Product: TransMemory [ 1348.124912] usb 1-2: Manufacturer: TOSHIBA [ 1348.124916] usb 1-2: SerialNumber: ... [ 1348.127994] usb-storage 1-2:1.0: USB Mass Storage device detected [ 1348.128212] scsi host2: usb-storage 1-2:1.0 [ 1348.346315] usb 1-2: USB disconnect, device number 7 [ 1371.626752] usb 1-2: new high-speed USB device number 8 using xhci_hcd [ 1371.756618] usb 1-2: New USB device found, idVendor=18a5, idProduct=0245, bcdDevice= 2.00 [ 1371.756634] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1371.756640] usb 1-2: Product: STORE N GO [ 1371.756645] usb 1-2: Manufacturer: Verbatim [ 1371.756649] usb 1-2: SerialNumber: ... [ 1371.757930] usb-storage 1-2:1.0: USB Mass Storage device detected [ 1371.759456] scsi host2: usb-storage 1-2:1.0 [ 1372.812926] scsi 2:0:0:0: Direct-Access VendorCo ProductCode 2.00 PQ: 0 ANSI: 4 [ 1372.814298] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1372.814392] sd 2:0:0:0: [sdb] 30924800 512-byte logical blocks: (15.8 GB/14.7 GiB) [ 1372.814536] sd 2:0:0:0: [sdb] Write Protect is off [ 1372.814540] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 1372.814658] sd 2:0:0:0: [sdb] No Caching mode page found [ 1372.814661] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 1372.823769] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 1417.688828] traps: gnome-disks[2487] trap int3 ip:7f9fa8d6e294 sp:7fff299cdf00 error:0 in libglib-2.0.so.0.7800.1[7f9fa8cf9000+103000] wlp2s0: deauthenticating from 3C8B7350E7C028AC7E9C63B2B8A0BFF2 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1433.258262] zram0: detected capacity change from 3885056 to 0