Probe #712528a48d of KaiTian N80z G2e
Log: dmesg.1
[ 0.000000] Linux version 6.8.0-60-generic (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.3.0-1ubuntu1~22.04) 12.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #63~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Tue Apr 22 19:00:15 UTC 2 (Ubuntu 6.8.0-60.63~22.04.1-generic 6.8.12)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-60-generic root=UUID=HASH_93D-8CBF-D5F5-679F-1E90C36C3AB3 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bcb7efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bcb7f000-0x00000000be37efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000be37f000-0x00000000be3defff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be3df000-0x00000000be3fdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000be3fe000-0x00000000bfa3dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfa3e000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe020000-0x00000000fe020fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb7ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003bfffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] e820: update [mem 0xb4557018-0xb4567057] usable ==> usable
[ 0.000000] e820: update [mem 0xb4557018-0xb4567057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b4557017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b4557018-0x00000000b4567057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b4567058-0x00000000bcb7efff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bcb7f000-0x00000000be37efff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000be37f000-0x00000000be3defff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000be3df000-0x00000000be3fdfff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000be3fe000-0x00000000bfa3dfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bfa3e000-0x00000000bfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe020000-0x00000000fe020fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb7ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000003bfffffff] usable
[ 0.000000] efi: EFI v2.7 by KaiTian
[ 0.000000] efi: SMBIOS=0xbce76000 SMBIOS 3.0=0xbce74000 ACPI=0xbe3fd000 ACPI 2.0=0xbe3fd014 MEMATTR=0xb93b5198 MOKvar=0xbcd55000
[ 0.000000] secureboot: Secure boot disabled
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: KaiTian N80z G2e/LXKT-ZXG-N8P, BIOS W0RKT31A 04/02/2025
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2295.386 MHz processor
[ 0.001253] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001257] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001268] last_pfn = 0x3c0000 max_arch_pfn = 0x400000000
[ 0.001277] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs
[ 0.001281] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001876] last_pfn = 0xbfa3e max_arch_pfn = 0x400000000
[ 0.028000] Using GB pages for direct mapping
[ 0.028346] secureboot: Secure boot disabled
[ 0.028348] RAMDISK: [mem 0xad70a000-0xb20befff] ACPI: Early table checksum verification disabled
[ 0.028364] ACPI: RSDP 0x00000000BE3FD014 000024 (v02 Kunlun)
[ 0.028370] ACPI: XSDT 0x00000000BE3FC0E8 00006C (v01 Kunlun EDK2ZX 00000002 01000013)
[ 0.028378] ACPI: FACP 0x00000000BE3F8000 00010C (v05 Kunlun EDK2ZX 00000002 01000013)
[ 0.028386] ACPI: DSDT 0x00000000BE3E7000 00E88E (v02 Kunlun ZX_PLAT 00000001 INTL 20190108)
[ 0.028391] ACPI: FACS 0x00000000BE39D000 000040
[ 0.028395] ACPI: SPCR 0x00000000BE3FB000 000050 (v01 Kunlun EDK2ZX 00000002 01000013)
[ 0.028400] ACPI: APIC 0x00000000BE3FA000 0000C6 (v03 Kunlun EDK2ZX 00000002 01000013)
[ 0.028405] ACPI: ECDT 0x00000000BE3F9000 000069 (v01 Kunlun EDK2ZX 00000002 01000013)
[ 0.028410] ACPI: HPET 0x00000000BE3F7000 000038 (v01 Kunlun EDK2ZX 00000002 01000013)
[ 0.028414] ACPI: MCFG 0x00000000BE3F6000 00003C (v01 Kunlun EDK2ZX 00000002 01000013)
[ 0.028419] ACPI: SSDT 0x00000000BE3E6000 000DA5 (v01 Kunlun WmiTable 00001000 INTL 20190108)
[ 0.028424] ACPI: FPDT 0x00000000BE3E5000 000044 (v01 Kunlun EDK2ZX 00000002 01000013)
[ 0.028429] ACPI: BGRT 0x00000000BE3E4000 000038 (v01 Kunlun EDK2ZX 00000002 01000013)
[ 0.028433] ACPI: Reserving FACP table memory at [mem 0xbe3f8000-0xbe3f810b] ACPI: Reserving DSDT table memory at [mem 0xbe3e7000-0xbe3f588d] ACPI: Reserving FACS table memory at [mem 0xbe39d000-0xbe39d03f] ACPI: Reserving SPCR table memory at [mem 0xbe3fb000-0xbe3fb04f] ACPI: Reserving APIC table memory at [mem 0xbe3fa000-0xbe3fa0c5] ACPI: Reserving ECDT table memory at [mem 0xbe3f9000-0xbe3f9068] ACPI: Reserving HPET table memory at [mem 0xbe3f7000-0xbe3f7037] ACPI: Reserving MCFG table memory at [mem 0xbe3f6000-0xbe3f603b] ACPI: Reserving SSDT table memory at [mem 0xbe3e6000-0xbe3e6da4] ACPI: Reserving FPDT table memory at [mem 0xbe3e5000-0xbe3e5043] ACPI: Reserving BGRT table memory at [mem 0xbe3e4000-0xbe3e4037] No NUMA configuration found
[ 0.028669] Faking a node at [mem 0x0000000000000000-0x00000003bfffffff] NODE_DATA(0) allocated [mem 0x3bffd5000-0x3bfffffff] Zone ranges:
[ 0.029071] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x00000003bfffffff] Device empty
[ 0.029082] Movable zone start for each node
[ 0.029086] Early memory node ranges
[ 0.029087] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x00000000bcb7efff] node 0: [mem 0x00000000be3fe000-0x00000000bfa3dfff] node 0: [mem 0x0000000100000000-0x00000003bfffffff] Initmem setup node 0 [mem 0x0000000000001000-0x00000003bfffffff] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.029146] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.048123] On node 0, zone DMA32: 6271 pages in unavailable ranges
[ 0.118517] On node 0, zone Normal: 1474 pages in unavailable ranges
[ 0.118740] ACPI: PM-Timer IO Port: 0x808
[ 0.118767] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.118785] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.118793] IOAPIC[1]: apic_id 1, version 32, address 0xfec01000, GSI 24-47
[ 0.118797] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.118801] ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 3 low level)
[ 0.118803] ACPI: INT_SRC_OVR (bus 0 bus_irq 4 global_irq 4 low level)
[ 0.118805] ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 7 dfl dfl)
[ 0.118807] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.118809] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 dfl dfl)
[ 0.118816] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.118820] ACPI: HPET id: 0x1d178201 base: 0xfeb97000
[ 0.118844] e820: update [mem 0xb8c56000-0xb8cedfff] usable ==> reserved
[ 0.118869] ACPI: SPCR: SPCR table version 1
[ 0.118873] ACPI: SPCR: console: uart,io,0x2e8,115200
[ 0.118877] TSC deadline timer available
[ 0.118879] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.118910] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xb4557000-0xb4557fff] PM: hibernation: Registered nosave memory: [mem 0xb4567000-0xb4567fff] PM: hibernation: Registered nosave memory: [mem 0xb8c56000-0xb8cedfff] PM: hibernation: Registered nosave memory: [mem 0xbcb7f000-0xbe37efff] PM: hibernation: Registered nosave memory: [mem 0xbe37f000-0xbe3defff] PM: hibernation: Registered nosave memory: [mem 0xbe3df000-0xbe3fdfff] PM: hibernation: Registered nosave memory: [mem 0xbfa3e000-0xbfffffff] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xdfffffff] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfe01ffff] PM: hibernation: Registered nosave memory: [mem 0xfe020000-0xfe020fff] PM: hibernation: Registered nosave memory: [mem 0xfe021000-0xfeafffff] PM: hibernation: Registered nosave memory: [mem 0xfeb00000-0xfeb7ffff] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecbffff] PM: hibernation: Registered nosave memory: [mem 0xfecc0000-0xfecc0fff] PM: hibernation: Registered nosave memory: [mem 0xfecc1000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.118950] Booting paravirtualized kernel on bare hardware
[ 0.118958] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.118979] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.120840] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288
[ 0.120851] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152
[ 0.120855] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
[ 0.120893] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.0-60-generic root=UUID=HASH_93D-8CBF-D5F5-679F-1E90C36C3AB3 ro quiet splash vt.handoff=7
[ 0.121088] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.8.0-60-generic", will be passed to user space.
[ 0.121114] random: crng init done
[ 0.127466] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.129987] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.130086] Fallback order for Node 0: 0
[ 0.130093] Built 1 zonelists, mobility grouping on. Total pages: 3604792
[ 0.130095] Policy zone: Normal
[ 0.130113] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.130123] software IO TLB: area num 8.
[ 0.197219] Memory: 14157216K/14648692K available (22528K kernel code, 4435K rwdata, 13952K rodata, 4988K init, 4728K bss, 491216K reserved, 0K cma-reserved)
[ 0.198862] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.198912] ftrace: allocating 58163 entries in 228 pages
[ 0.215773] ftrace: allocated 228 pages with 4 groups
[ 0.217124] Dynamic Preempt: voluntary
[ 0.217246] rcu: Preemptible hierarchical RCU implementation.
[ 0.217248] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.217251] Trampoline variant of Tasks RCU enabled.
[ 0.217252] Rude variant of Tasks RCU enabled.
[ 0.217253] Tracing variant of Tasks RCU enabled.
[ 0.217254] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.217256] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.223692] NR_IRQS: 524544, nr_irqs: 896, preallocated irqs: 16
[ 0.223945] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.224104] Console: colour dummy device 80x25
[ 0.224108] printk: legacy console [tty0] enabled
[ 0.224178] ACPI: Core revision 20230628
[ 0.224366] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.224388] APIC: Switch to symmetric I/O mode setup
[ 0.224513] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.225238] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.229388] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x21162e9e057, max_idle_ns: 440795255847 ns
[ 0.229396] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.77 BogoMIPS (lpj=2295386)
[ 0.229418] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.229443] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.229445] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.229449] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.229453] Spectre V2 : User space: Vulnerable
[ 0.229461] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.229463] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.229465] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.229466] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.229468] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.229471] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
[ 0.229472] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[ 0.276169] Freeing SMP alternatives memory: 48K
[ 0.276175] pid_max: default: 32768 minimum: 301
[ 0.278199] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity
[ 0.278231] landlock: Up and running.
[ 0.278232] Yama: becoming mindful.
[ 0.278288] AppArmor: AppArmor initialized
[ 0.278388] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.278427] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.279492] smpboot: CPU0: Centaur ZHAOXIN KaiXian KX-7000 (family: 0x7, model: 0x6b, stepping: 0x1)
[ 0.279752] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.279788] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.279811] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.279833] Performance Events:
[ 0.279835] core: Welcome to zhaoxin pmu!
[ 0.279837] core: Version check pass!
[ 0.279838] no PMU driver, software events only.
[ 0.279856] signal: max sigframe size: 3632
[ 0.279916] rcu: Hierarchical SRCU implementation.
[ 0.279919] rcu: Max phase no-delay instances is 400.
[ 0.280392] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.280489] smp: Bringing up secondary CPUs ...
[ 0.280667] smpboot: x86: Booting SMP configuration:
[ 0.280670] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.360439] smp: Brought up 1 node, 8 CPUs
[ 0.360447] smpboot: Max logical packages: 1
[ 0.360450] smpboot: Total of 8 processors activated (36726.17 BogoMIPS)
[ 0.363528] devtmpfs: initialized
[ 0.363528] x86/mm: Memory block size: 128MB
[ 0.365693] ACPI: PM: Registering ACPI NVS region [mem 0xbe37f000-0xbe3defff] (393216 bytes)
[ 0.365693] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.365693] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.365766] pinctrl core: initialized pinctrl subsystem
[ 0.365929] PM: RTC time: 06:53:48, date: 2025-06-28
[ 0.367082] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.367544] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.367779] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.368012] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.368059] thermal_sys: Registered thermal governor 'fair_share'
[ 0.368059] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.368059] thermal_sys: Registered thermal governor 'step_wise'
[ 0.368059] thermal_sys: Registered thermal governor 'user_space'
[ 0.368059] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.368059] EISA bus registered
[ 0.368419] cpuidle: using governor ladder
[ 0.368419] cpuidle: using governor menu
[ 0.368538] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.368712] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: Using configuration type 1 for base access
[ 0.368979] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.373472] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.373472] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.373472] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.373472] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.374609] ACPI: Added _OSI(Module Device)
[ 0.374613] ACPI: Added _OSI(Processor Device)
[ 0.374614] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.374616] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.384944] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.385743] ACPI: EC: EC started
[ 0.385746] ACPI: EC: interrupt blocked
[ 0.385994] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.385996] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.411306] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.411306] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
[ 0.411306] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.411306] ACPI: Interpreter enabled
[ 0.411306] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.411306] ACPI: Using IOAPIC for interrupt routing
[ 0.411612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.411615] PCI: Ignoring E820 reservations for host bridge windows
[ 0.411910] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.411917] ACPI: Enabled 1 GPEs in block 10 to 5F
[ 0.428570] ACPI: PCI Root Bridge [ND00] (domain 0000 [bus 00-ff])
[ 0.428584] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] PCI host bridge to bus 0000:00
[ 0.429738] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0xfeb95200-0xfeb9525f window] pci_bus 0000:00: root bus resource [mem 0xfeb99030-0xfeb9903f window] pci_bus 0000:00: root bus resource [mem 0x7800000000-0x7fffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1d17:1007] type 00 class 0x060000 PCIe Root Port
[ 0.429899] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.429999] pci 0000:00:00.1: [1d17:31b0] type 00 class 0x060000 conventional PCI endpoint
[ 0.430177] pci 0000:00:00.2: [1d17:31b1] type 00 class 0x060000 PCIe Root Port
[ 0.430266] pci 0000:00:00.2: PME# supported from D0 D3hot D3cold
[ 0.430386] pci 0000:00:00.3: [1d17:31b2] type 00 class 0x060000 PCIe Root Port
[ 0.430457] pci 0000:00:00.3: PME# supported from D0 D3hot D3cold
[ 0.430564] pci 0000:00:00.4: [1d17:31b3] type 00 class 0x060000 conventional PCI endpoint
[ 0.430722] pci 0000:00:00.5: [1d17:31b4] type 00 class 0x060000 PCIe Root Port
[ 0.430809] pci 0000:00:00.5: PME# supported from D0 D3hot D3cold
[ 0.430916] pci 0000:00:00.6: [1d17:31b5] type 00 class 0x060000 conventional PCI endpoint
[ 0.431067] pci 0000:00:00.7: [1d17:3200] type 00 class 0x060000 PCIe Root Port
[ 0.431154] pci 0000:00:00.7: PME# supported from D0 D3hot D3cold
[ 0.431237] pci 0000:00:01.0: [1d17:3a05] type 00 class 0x030000 conventional PCI endpoint
[ 0.431266] pci 0000:00:01.0: BAR 0 [mem 0xc0000000-0xc01fffff] pci 0000:00:01.0: BAR 1 [mem 0x7800000000-0x781fffffff 64bit pref] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:01.0: supports D1 D2
[ 0.431405] pci 0000:00:01.1: [1d17:9146] type 00 class 0x040300 conventional PCI endpoint
[ 0.431433] pci 0000:00:01.1: BAR 0 [mem 0xc0524000-0xc0527fff] pci 0000:00:01.1: supports D1 D2
[ 0.431563] pci 0000:00:02.0: [1d17:0717] type 01 class 0x060400 PCIe Root Port
[ 0.431585] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] pci 0000:00:02.0: bridge window [mem 0xc0400000-0xc04fffff] pci 0000:00:02.0: enabling Extended Tags
[ 0.431670] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.431851] pci 0000:00:02.1: [1d17:0718] type 01 class 0x060400 PCIe Root Port
[ 0.431873] pci 0000:00:02.1: PCI bridge to [bus 02] pci 0000:00:02.1: bridge window [io 0x1000-0x1fff] pci 0000:00:02.1: bridge window [mem 0xc0300000-0xc03fffff] pci 0000:00:02.1: enabling Extended Tags
[ 0.431957] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.432135] pci 0000:00:03.0: [1d17:0719] type 01 class 0x060400 PCIe Root Port
[ 0.432157] pci 0000:00:03.0: PCI bridge to [bus 03] pci 0000:00:03.0: bridge window [mem 0xc0200000-0xc02fffff] pci 0000:00:03.0: enabling Extended Tags
[ 0.432239] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.432433] pci 0000:00:11.0: [1d17:1001] type 00 class 0x060100 conventional PCI endpoint
[ 0.432628] pci 0000:00:11.7: [1d17:31b7] type 00 class 0x060000 conventional PCI endpoint
[ 0.432759] pci 0000:00:12.0: [1d17:9204] type 00 class 0x0c0330 conventional PCI endpoint
[ 0.432788] pci 0000:00:12.0: BAR 0 [mem 0x7820002000-0x7820002fff 64bit] pci 0000:00:12.0: BAR 2 [mem 0x7820001000-0x7820001fff 64bit] pci 0000:00:12.0: BAR 4 [mem 0x7820000000-0x7820000fff 64bit] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.432962] pci 0000:00:14.0: [1d17:3288] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[ 0.432997] pci 0000:00:14.0: BAR 0 [mem 0xc0520000-0xc0523fff 64bit] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[ 0.433179] pci 0000:00:1f.0: [1d17:3c00] type 00 class 0x060000 PCIe Root Port
[ 0.433250] pci 0000:00:1f.0: PME# supported from D0 D3hot D3cold
[ 0.433427] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[ 0.433484] pci 0000:01:00.0: BAR 0 [io 0x2000-0x20ff] pci 0000:01:00.0: BAR 2 [mem 0xc0404000-0xc0404fff 64bit] pci 0000:01:00.0: BAR 4 [mem 0xc0400000-0xc0403fff 64bit] pci 0000:01:00.0: supports D1 D2
[ 0.433605] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.433806] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:02:00.0: [10ec:b852] type 00 class 0x028000 PCIe Endpoint
[ 0.433963] pci 0000:02:00.0: BAR 0 [io 0x1000-0x10ff] pci 0000:02:00.0: BAR 2 [mem 0xc0300000-0xc03fffff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.434301] pci 0000:00:02.1: PCI bridge to [bus 02] pci 0000:03:00.0: [1dee:5216] type 00 class 0x010802 PCIe Endpoint
[ 0.434418] pci 0000:03:00.0: BAR 0 [mem 0xc0220000-0xc0223fff 64bit] pci 0000:03:00.0: ROM [mem 0xc0200000-0xc021ffff pref] pci 0000:00:03.0: PCI bridge to [bus 03] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.438012] ACPI: PCI: Interrupt link LNKA disabled
[ 0.438073] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.438076] ACPI: PCI: Interrupt link LNKB disabled
[ 0.438131] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.438133] ACPI: PCI: Interrupt link LNKC disabled
[ 0.438187] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.438188] ACPI: PCI: Interrupt link LNKD disabled
[ 0.438241] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.438243] ACPI: PCI: Interrupt link LNKE disabled
[ 0.438323] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.438325] ACPI: PCI: Interrupt link LNKF disabled
[ 0.438385] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.438387] ACPI: PCI: Interrupt link LNKG disabled
[ 0.438448] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.438450] ACPI: PCI: Interrupt link LNKH disabled
[ 0.438714] ACPI: EC: interrupt unblocked
[ 0.438717] ACPI: EC: event unblocked
[ 0.438720] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.438722] ACPI: EC: GPE=0xb
[ 0.438725] ACPI: \_SB_.ND00.SBRG.EC0_: Boot ECDT EC initialization complete
[ 0.438728] ACPI: \_SB_.ND00.SBRG.EC0_: EC: Used to handle transactions and events
[ 0.438850] iommu: Default domain type: Translated
[ 0.438850] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.438850] SCSI subsystem initialized
[ 0.438850] libata version 3.00 loaded.
[ 0.438850] ACPI: bus type USB registered
[ 0.438850] usbcore: registered new interface driver usbfs
[ 0.438850] usbcore: registered new interface driver hub
[ 0.438850] usbcore: registered new device driver usb
[ 0.439402] pps_core: LinuxPPS API ver. 1 registered
[ 0.439404] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX>
[ 0.439408] PTP clock support registered
[ 0.439434] EDAC MC: Ver: 3.0.0
[ 0.439503] efivars: Registered efivars operations
[ 0.439827] NetLabel: Initializing
[ 0.439831] NetLabel: domain hash size = 128
[ 0.439833] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.439869] NetLabel: unlabeled traffic allowed by default
[ 0.440422] mctp: management component transport protocol core
[ 0.440422] NET: Registered PF_MCTP protocol family
[ 0.440422] PCI: Using ACPI for IRQ routing
[ 0.447367] PCI: pci_cache_line_size set to 64 bytes
[ 0.447422] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] e820: reserve RAM buffer [mem 0xb4557018-0xb7ffffff] e820: reserve RAM buffer [mem 0xb8c56000-0xbbffffff] e820: reserve RAM buffer [mem 0xbcb7f000-0xbfffffff] e820: reserve RAM buffer [mem 0xbfa3e000-0xbfffffff] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.447489] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.447489] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.447489] vgaarb: loaded
[ 0.447489] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.447489] hpet0: at MMIO 0xfeb97000, IRQs 2, 8, 0
[ 0.447494] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.449455] clocksource: Switched to clocksource tsc-early
[ 0.450487] VFS: Disk quotas dquot_6.6.0
[ 0.450509] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.450723] AppArmor: AppArmor Filesystem Enabled
[ 0.450777] pnp: PnP ACPI init
[ 0.450894] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.450899] system 00:00: [mem 0xfeb80000-0xfeb951ff] has been reserved
[ 0.450903] system 00:00: [mem 0xfeb95260-0xfeb9902f] could not be reserved
[ 0.450905] system 00:00: [mem 0xfeb99040-0xfebfffff] has been reserved
[ 0.450908] system 00:00: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.451164] system 00:01: [mem 0xfeb99000-0xfeb99007] has been reserved
[ 0.451461] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.451731] system 00:06: [io 0x0800-0x08ff window] has been reserved
[ 0.451736] system 00:06: [io 0x0400-0x041f] has been reserved
[ 0.451739] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.451742] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.451982] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.452818] pnp: PnP ACPI: found 9 devices
[ 0.459813] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.459920] NET: Registered PF_INET protocol family
[ 0.460193] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.482961] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.483001] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.483086] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.483498] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.483658] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.483792] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[ 0.483870] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.483933] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.484042] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.484055] NET: Registered PF_XDP protocol family
[ 0.484079] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0x2000-0x2fff] pci 0000:00:02.0: bridge window [mem 0xc0400000-0xc04fffff] pci 0000:00:02.1: PCI bridge to [bus 02] pci 0000:00:02.1: bridge window [io 0x1000-0x1fff] pci 0000:00:02.1: bridge window [mem 0xc0300000-0xc03fffff] pci 0000:00:03.0: PCI bridge to [bus 03] pci 0000:00:03.0: bridge window [mem 0xc0200000-0xc02fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x1000-0xffff window] pci_bus 0000:00: resource 7 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xdfffffff window] pci_bus 0000:00: resource 10 [mem 0xfeb95200-0xfeb9525f window] pci_bus 0000:00: resource 11 [mem 0xfeb99030-0xfeb9903f window] pci_bus 0000:00: resource 12 [mem 0x7800000000-0x7fffffffff window] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] pci_bus 0000:01: resource 1 [mem 0xc0400000-0xc04fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xc0300000-0xc03fffff] pci_bus 0000:03: resource 1 [mem 0xc0200000-0xc02fffff] pci 0000:00:12.0: enabling device (0000 -> 0002)
[ 0.484594] PCI: CLS 64 bytes, default 64
[ 0.484620] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.484622] software IO TLB: mapped [mem 0x00000000b4c56000-0x00000000b8c56000] (64MB)
[ 0.484703] Trying to unpack rootfs image as initramfs...
[ 0.485309] Initialise system trusted keyrings
[ 0.485328] Key type blacklist registered
[ 0.485433] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.485455] zbud: loaded
[ 0.485841] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.486002] fuse: init (API version 7.39)
[ 0.486209] integrity: Platform Keyring initialized
[ 0.486217] integrity: Machine keyring initialized
[ 0.501793] Key type asymmetric registered
[ 0.501799] Asymmetric key parser 'x509' registered
[ 0.501851] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.501975] io scheduler mq-deadline registered
[ 0.502914] pcieport 0000:00:02.0: PME: Signaling with IRQ 25
[ 0.503197] pcieport 0000:00:02.1: PME: Signaling with IRQ 27
[ 0.503474] pcieport 0000:00:03.0: PME: Signaling with IRQ 29
[ 0.503597] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.504669] ACPI: AC: AC Adapter [AC] (off-line)
[ 0.504774] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.504803] ACPI: button: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.504871] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.505239] ACPI: button: Power Button [PWRF] ACPI: \_PR_.CP00: Found 5 idle states
[ 0.505863] ACPI: \_PR_.CP01: Found 5 idle states
[ 0.506143] ACPI: \_PR_.CP02: Found 5 idle states
[ 0.506436] ACPI: \_PR_.CP03: Found 5 idle states
[ 0.506972] ACPI: \_PR_.CP04: Found 5 idle states
[ 0.507741] ACPI: \_PR_.CP05: Found 5 idle states
[ 0.508252] ACPI: \_PR_.CP06: Found 5 idle states
[ 0.508517] ACPI: \_PR_.CP07: Found 5 idle states
[ 0.509504] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.530018] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.534157] Linux agpgart interface v0.103
[ 0.540181] loop: module loaded
[ 0.540735] ACPI: bus type drm_connector registered
[ 0.541104] tun: Universal TUN/TAP device driver, 1.6
[ 0.541332] PPP generic driver version 2.4.2
[ 0.541596] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.548659] ACPI: battery: Slot [BAT1] (battery present)
[ 0.549846] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.549857] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.550037] mousedev: PS/2 mouse device common for all mice
[ 0.550424] rtc_cmos 00:02: RTC can wake from S4
[ 0.551038] rtc_cmos 00:02: registered as rtc0
[ 0.551096] rtc_cmos 00:02: setting system clock to 2025-06-28T06:53:49 UTC (1751093629)
[ 0.551155] rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.551171] i2c_dev: i2c /dev entries driver
[ 0.551212] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 0.551242] device-mapper: uevent: version 1.0.3
[ 0.551515] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX
[ 0.551555] platform eisa.0: Probing EISA bus 0
[ 0.551569] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 0.551571] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 0.551573] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 0.551575] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 0.551576] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 0.551578] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 0.551580] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 0.551581] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 0.551583] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.551584] platform eisa.0: EISA: Detected 0 cards
[ 0.552183] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.552678] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[ 0.552940] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.557400] fbcon: Deferring console take-over
[ 0.557415] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[ 0.557642] drop_monitor: Initializing network drop monitor service
[ 0.557858] NET: Registered PF_INET6 protocol family
[ 1.023388] Freeing initrd memory: 75476K
[ 1.034100] Segment Routing with IPv6
[ 1.034145] In-situ OAM (IOAM) with IPv6
[ 1.034215] NET: Registered PF_PACKET protocol family
[ 1.034650] Key type dns_resolver registered
[ 1.037164] IPI shorthand broadcast: enabled
[ 1.039643] sched_clock: Marking stable (1039002864, 399773)->(1045017135, -5614498)
[ 1.040072] registered taskstats version 1
[ 1.042127] Loading compiled-in X.509 certificates
[ 1.043453] Loaded X.509 cert 'Build time autogenerated kernel key: 57b44b86d0728d0379ec84dae9b5f69c8ef7037d'
[ 1.044156] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
[ 1.044853] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
[ 1.044857] blacklist: Loading compiled-in revocation X.509 certificates
[ 1.044886] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
[ 1.044908] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
[ 1.044930] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
[ 1.044950] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
[ 1.044971] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
[ 1.044991] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
[ 1.045013] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
[ 1.045033] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
[ 1.050490] Key type .fscrypt registered
[ 1.050494] Key type fscrypt-provisioning registered
[ 1.073764] Key type encrypted registered
[ 1.073787] AppArmor: AppArmor sha256 policy hashing enabled
[ 1.074023] ima: No TPM chip found, activating TPM-bypass!
[ 1.074038] Loading compiled-in module X.509 certificates
[ 1.074814] Loaded X.509 cert 'Build time autogenerated kernel key: 57b44b86d0728d0379ec84dae9b5f69c8ef7037d'
[ 1.074818] ima: Allocated hash algorithm: sha256
[ 1.074842] ima: No architecture policies found
[ 1.074861] evm: Initialising EVM extended attributes:
[ 1.074863] evm: security.selinux
[ 1.074865] evm: security.SMACK64
[ 1.074867] evm: security.SMACK64EXEC
[ 1.074868] evm: security.SMACK64TRANSMUTE
[ 1.074869] evm: security.SMACK64MMAP
[ 1.074870] evm: security.apparmor
[ 1.074871] evm: security.ima
[ 1.074873] evm: security.capability
[ 1.074874] evm: HMAC attrs: 0x1
[ 1.075575] PM: Magic number: 13:79:874
[ 1.090620] RAS: Correctable Errors collector initialized.
[ 1.090781] clk: Disabling unused clocks
[ 1.095804] Freeing unused decrypted memory: 2028K
[ 1.097804] Freeing unused kernel image (initmem) memory: 4988K
[ 1.097809] Write protecting the kernel read-only data: 36864k
[ 1.098671] Freeing unused kernel image (rodata/data gap) memory: 384K
[ 1.139129] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.139140] Run /init as init process
[ 1.139142] with arguments:
[ 1.139145] /init
[ 1.139147] splash
[ 1.139149] with environment:
[ 1.139150] HOME=/
[ 1.139152] TERM=linux
[ 1.139153] BOOT_IMAGE=/boot/vmlinuz-6.8.0-60-generic
[ 1.322552] hid: raw HID events driver (C) Jiri Kosina
[ 1.323226] ACPI: video: Video Device [EUMA] (multi-head: yes rom: no post: no)
[ 1.323759] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.348958] xhci_hcd 0000:00:12.0: xHCI Host Controller
[ 1.348975] xhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 1.352920] nvme nvme0: pci function 0000:03:00.0
[ 1.353210] VIA RNG detected
[ 1.355315] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 85D579C99EC5956C2E6EB97B15B2B6D9, XID 541, IRQ 31
[ 1.355323] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] nvme nvme0: missing or invalid SUBNQN field.
[ 1.469526] xhci_hcd 0000:00:12.0: hcc params 0x00205fe3 hci version 0x110 quirks 0x0000400000000810
[ 1.470120] xhci_hcd 0000:00:12.0: xHCI Host Controller
[ 1.470136] xhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
[ 1.470148] xhci_hcd 0000:00:12.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.470646] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 1.470659] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.470665] usb usb1: Product: xHCI Host Controller
[ 1.470671] usb usb1: Manufacturer: Linux 6.8.0-60-generic xhci-hcd
[ 1.470676] usb usb1: SerialNumber: ...
[ 1.471254] hub 1-0:1.0: USB hub found
[ 1.471310] hub 1-0:1.0: 10 ports detected
[ 1.473028] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08
[ 1.473034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=...
[ 1.473037] usb usb2: Product: xHCI Host Controller
[ 1.473039] usb usb2: Manufacturer: Linux 6.8.0-60-generic xhci-hcd
[ 1.473041] usb usb2: SerialNumber: ...
[ 1.473439] hub 2-0:1.0: USB hub found
[ 1.473472] hub 2-0:1.0: 6 ports detected
[ 1.473710] usb: port power management may be unreliable
[ 1.503812] nvme nvme0: allocated 64 MiB host memory buffer.
[ 1.535505] tsc: Refined TSC clocksource calibration: 2295.445 MHz
[ 1.535547] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21166635d41, max_idle_ns: 440795308349 ns
[ 1.535693] clocksource: Switched to clocksource tsc
[ 1.713724] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 1.840036] nvme nvme0: 8/0/0 default/read/poll queues
[ 1.845962] usb 1-1: New USB device found, idVendor=17ef, idProduct=6165, bcdDevice= 2.00
[ 1.845989] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=...
[ 1.845998] usb 1-1: Product: thinkplus WL 200pro
[ 1.848932] nvme0n1: p1 p2 p3
[ 1.870725] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 1.964482] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[ 2.092994] usb 1-3: New USB device found, idVendor=28ed, idProduct=2031, bcdDevice=23.70
[ 2.093018] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 2.093027] usb 1-3: Product: BIOMETRICDEVIC
[ 2.093034] usb 1-3: Manufacturer: ARATK
[ 2.093040] usb 1-3: SerialNumber: ...
[ 2.210125] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[ 2.369859] usb 1-4: New USB device found, idVendor=1bcf, idProduct=28c4, bcdDevice= 7.24
[ 2.369887] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 2.369897] usb 1-4: Product: Integrated Camera
[ 2.369904] usb 1-4: Manufacturer: SunplusIT Inc
[ 2.369910] usb 1-4: SerialNumber: ...
[ 2.494746] usb 1-9: new full-speed USB device number 5 using xhci_hcd
[ 2.622456] usb 1-9: New USB device found, idVendor=0bda, idProduct=4853, bcdDevice= 0.00
[ 2.622482] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=...
[ 2.622491] usb 1-9: Product: Bluetooth Radio
[ 2.622499] usb 1-9: Manufacturer: Realtek
[ 2.622505] usb 1-9: SerialNumber: ...
[ 2.654965] usbcore: registered new interface driver usbhid
[ 2.654977] usbhid: USB HID core driver
[ 2.663099] input: thinkplus WL 200pro as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.0/0003:17EF:6165.0001/input/input7
[ 2.716546] hid-generic 0003:17EF:6165.0001: input,hidraw0: USB HID v1.10 Keyboard [thinkplus WL 200pro] on usb-0000:00:12.0-1/input0
[ 2.717727] input: thinkplus WL 200pro as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.1/0003:17EF:6165.0002/input/input8
[ 2.718136] input: thinkplus WL 200pro Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.1/0003:17EF:6165.0002/input/input9
[ 2.719130] input: thinkplus WL 200pro Consumer Control as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.1/0003:17EF:6165.0002/input/input10
[ 2.772212] input: thinkplus WL 200pro System Control as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.1/0003:17EF:6165.0002/input/input11
[ 2.773609] hid-generic 0003:17EF:6165.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [thinkplus WL 200pro] on usb-0000:00:12.0-1/input1
[ 3.130817] fbcon: Taking over console
[ 3.148947] Console: switching to colour frame buffer device 160x50
[ 3.178170] EXT4-fs (nvme0n1p3): mounted filesystem HASH_93D-8CBF-D5F5-679F-1E90C36C3AB3 ro with ordered data mode. Quota mode: none.
[ 3.469176] block nvme0n1: the capability attribute has been deprecated.
[ 3.670103] pstore: Using crash dump compression: deflate
[ 3.672087] pstore: Registered efi_pstore as persistent store backend
[ 3.692626] EXT4-fs (nvme0n1p3): re-mounted HASH_93D-8CBF-D5F5-679F-1E90C36C3AB3 r/w. Quota mode: none.
[ 3.697049] lp: driver loaded but no devices found
[ 3.703178] ppdev: user-space parallel port driver
[ 3.766123] loop0: detected capacity change from 0 to 8
[ 3.771494] loop1: detected capacity change from 0 to 152112
[ 3.772144] loop2: detected capacity change from 0 to 661176
[ 3.773842] loop3: detected capacity change from 0 to 130592
[ 3.776944] loop4: detected capacity change from 0 to 646840
[ 3.777377] loop5: detected capacity change from 0 to 649104
[ 3.777815] loop6: detected capacity change from 0 to 151352
[ 3.780485] loop7: detected capacity change from 0 to 555496
[ 3.783028] loop8: detected capacity change from 0 to 502776
[ 3.786235] loop9: detected capacity change from 0 to 716176
[ 3.789299] loop10: detected capacity change from 0 to 1034424
[ 3.791933] loop11: detected capacity change from 0 to 1056784
[ 3.794872] loop12: detected capacity change from 0 to 187776
[ 3.799712] loop13: detected capacity change from 0 to 338088
[ 3.800415] loop14: detected capacity change from 0 to 26472
[ 3.803124] loop15: detected capacity change from 0 to 24984
[ 3.805339] loop16: detected capacity change from 0 to 79520
[ 3.808478] loop17: detected capacity change from 0 to 104240
[ 3.810668] loop18: detected capacity change from 0 to 1000
[ 3.811677] loop19: detected capacity change from 0 to 1136
[ 3.813248] loop20: detected capacity change from 0 to 239704
[ 4.156645] cryptd: max_cpu_qlen set to 1000
[ 4.157197] mc: Linux media interface: v0.10
[ 4.158617] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.159022] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.159250] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 4.169704] AVX2 version of gcm_enc/dec engaged.
[ 4.169833] AES CTR mode by8 optimization enabled
[ 4.187349] videodev: Linux video capture interface: v2.00
[ 4.197316] Adding 31250428k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:31250428k SS
[ 4.241868] Bluetooth: Core ver 2.22
[ 4.332853] NET: Registered PF_BLUETOOTH protocol family
[ 4.332862] Bluetooth: HCI device and connection manager initialized
[ 4.332873] Bluetooth: HCI socket layer initialized
[ 4.332878] Bluetooth: L2CAP socket layer initialized
[ 4.332893] Bluetooth: SCO socket layer initialized
[ 4.368678] usb 1-4: Found UVC 1.00 device Integrated Camera (1bcf:28c4)
[ 4.388729] usbcore: registered new interface driver btusb
[ 4.390719] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
[ 4.391713] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 4.391722] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
[ 4.393650] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
[ 4.394060] Bluetooth: hci0: RTL: cfg_sz 6, total sz 38955
[ 4.405370] usbcore: registered new interface driver uvcvideo
[ 4.500718] rtw89_8852be 0000:02:00.0: loaded firmware rtw89/rtw8852b_fw-1.bin
[ 4.500872] rtw89_8852be 0000:02:00.0: enabling device (0000 -> 0003)
[ 4.503957] rtw89_8852be 0000:02:00.0: Firmware version XXX.XXX.XXX.XXX (da87cccd), cmd version 0, type 5
[ 4.503966] rtw89_8852be 0000:02:00.0: Firmware version XXX.XXX.XXX.XXX (da87cccd), cmd version 0, type 3
[ 4.536945] via_cputemp via_cputemp.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.537860] via_cputemp via_cputemp.1: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.539149] via_cputemp via_cputemp.2: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.539433] via_cputemp via_cputemp.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.539630] via_cputemp via_cputemp.4: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.559197] snd_hda_codec_conexant hdaudioC0D0: SN6180: BIOS auto-probing.
[ 4.559788] snd_hda_codec_conexant hdaudioC0D0: autoconfig for SN6180: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 4.559794] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.559797] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 4.559800] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 4.559802] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 4.559804] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ 4.559807] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ 4.572749] via_cputemp via_cputemp.5: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.573653] via_cputemp via_cputemp.6: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.573836] input: HDA Zhaoxin Mic as /devices/pci0000:00/0000:00:14.0/sound/card0/input13
[ 4.574664] via_cputemp via_cputemp.7: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.582987] padlock_aes: Using VIA PadLock ACE for AES algorithm.
[ 4.584714] padlock_sha: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
[ 4.712003] Bluetooth: hci0: RTL: fw version 0xdfb791cb
[ 4.796609] input: HDA Zhaoxin Headphone as /devices/pci0000:00/0000:00:14.0/sound/card0/input14
[ 4.802040] Bluetooth: hci0: Failed to read codec capabilities (-22)
[ 4.810816] Bluetooth: hci0: AOSP extensions version v0.96
[ 4.810825] Bluetooth: hci0: AOSP quality report is not supported
[ 4.835376] rtw89_8852be 0000:02:00.0: chip rfe_type is 1
[ 4.896331] rtw89_8852be 0000:02:00.0 wlp2s0: renamed from wlan0
[ 5.162467] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.162476] Bluetooth: BNEP filters: protocol multicast
[ 5.162486] Bluetooth: BNEP socket layer initialized
[ 5.164577] Bluetooth: MGMT ver 1.22
[ 5.169931] NET: Registered PF_ALG protocol family
[ 5.316485] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[ 5.458767] r8169 0000:01:00.0 enp1s0: Link is Down
[ 7.517986] loop21: detected capacity change from 0 to 8
[ 8.094561] rfkill: input handler disabled
[ 9.646067] wlp2s0: authenticate with 13E55BD2F1BC2D7588B46FFFB8B5D87F (local address=060A4F003375CFA55DA7693A0D635831)
[ 9.646084] wlp2s0: send auth to 13E55BD2F1BC2D7588B46FFFB8B5D87F (try 1/3)
[ 9.652720] wlp2s0: authenticated
[ 9.654672] wlp2s0: associate with 13E55BD2F1BC2D7588B46FFFB8B5D87F (try 1/3)
[ 9.661964] wlp2s0: RX AssocResp from 13E55BD2F1BC2D7588B46FFFB8B5D87F (capab=0x1531 status=0 aid=2)
[ 9.775663] wlp2s0: associated
[ 130.222708] CE: hpet increased min_delta_ns to 20115 nsec
[ 323.370729] loop21: detected capacity change from 0 to 661176
[ 337.526136] loop22: detected capacity change from 0 to 502416
[ 6318.603270] atkbd serio0: Unknown key pressed (translated set 2, code 0xbf on isa0060/serio0).
[ 6318.603285] atkbd serio0: Use 'setkeycodes e03f <keycode>' to make it known.
[ 6318.755623] atkbd serio0: Unknown key released (translated set 2, code 0xbf on isa0060/serio0).
[ 6318.755639] atkbd serio0: Use 'setkeycodes e03f <keycode>' to make it known.
[ 8197.901325] rfkill: input handler enabled
[ 8198.381172] Bluetooth: RFCOMM TTY layer initialized
[ 8198.381195] Bluetooth: RFCOMM socket layer initialized
[ 8198.381214] Bluetooth: RFCOMM ver 1.11
[ 8200.527461] rfkill: input handler disabled
[ 8306.957917] warning: `Socket Thread' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[25429.995567] rfkill: input handler enabled
[25432.000280] wlp2s0: deauthenticating from 13E55BD2F1BC2D7588B46FFFB8B5D87F by local choice (Reason: 3=DEAUTH_LEAVING)