[ 0.000000] Linux version 6.1.0-7-amd64 (XXX@XXX) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.20-1 (2023-03-19) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-7-amd64 root=UUID=HASH_1F7-665B-3EEB-2EB6-950EDB8F224D ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d81fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009d82000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a210fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a211000-0x00000000cb059fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb05a000-0x00000000cb05afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cb05b000-0x00000000cb086fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cb087000-0x00000000cb087fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cb088000-0x00000000daca5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000daca6000-0x00000000db059fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db05a000-0x00000000db0bdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000db0be000-0x00000000dcbbdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dcbbe000-0x00000000ddb56fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ddb57000-0x00000000ddbfefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000ddbff000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081f2fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000081f300000-0x000000081fffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI=0xdcba5000 ACPI 2.0=0xdcba5014 SMBIOS=0xdda09000 MEMATTR=0xd792b018 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING PLUS (MS-7C37), BIOS A.I0 08/10/2022 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3799.767 MHz processor [ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000013] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000021] last_pfn = 0x81f300 max_arch_pfn = 0x400000000 [ 0.000641] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000788] e820: update [mem 0xdc970000-0xdc97ffff] usable ==> reserved [ 0.000791] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000795] last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.004295] Using GB pages for direct mapping [ 0.005268] RAMDISK: [mem 0x3134d000-0x3499dfff] ACPI: Early table checksum verification disabled [ 0.005273] ACPI: RSDP 0x00000000DCBA5014 000024 (v02 ALASKA) [ 0.005276] ACPI: XSDT 0x00000000DCBA4728 0000BC (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.005280] ACPI: FACP 0x00000000DB0B7000 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.005283] ACPI: DSDT 0x00000000DB090000 0070D2 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.005285] ACPI: FACS 0x00000000DCB9F000 000040 [ 0.005287] ACPI: SSDT 0x00000000DB0BD000 00092A (v02 AMD AmdTable 00000002 MSFT 04000000) [ 0.005289] ACPI: SSDT 0x00000000DB0B9000 003B7E (v01 AMD AMD AOD 00000001 INTL 20120913) [ 0.005291] ACPI: SSDT 0x00000000DB0B8000 000164 (v02 ALASKA CPUSSDT 01072009 AMI 01072009) [ 0.005293] ACPI: FIDT 0x00000000DB0AF000 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005295] ACPI: MCFG 0x00000000DB0AE000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.005297] ACPI: HPET 0x00000000DB0AD000 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.005299] ACPI: SSDT 0x00000000DB0AC000 000024 (v01 AMD BIXBY 00001000 INTL 20120913) [ 0.005300] ACPI: IVRS 0x00000000DB0AB000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001) [ 0.005302] ACPI: FPDT 0x00000000DB0AA000 000044 (v01 ALASKA A M I 01072009 AMI 01000013) [ 0.005304] ACPI: PCCT 0x00000000DB0A9000 00006E (v02 AMD AmdTable 00000001 AMD 00000001) [ 0.005306] ACPI: SSDT 0x00000000DB0A2000 00603B (v02 AMD AmdTable 00000001 AMD 00000001) [ 0.005308] ACPI: CRAT 0x00000000DB0A0000 0016D0 (v01 AMD AmdTable 00000001 AMD 00000001) [ 0.005310] ACPI: CDIT 0x00000000DB09F000 000029 (v01 AMD AmdTable 00000001 AMD 00000001) [ 0.005312] ACPI: BGRT 0x00000000DB09E000 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005314] ACPI: SSDT 0x00000000DB09A000 0037B0 (v01 AMD QOGIRN 00000001 INTL 20120913) [ 0.005316] ACPI: WSMT 0x00000000DB099000 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.005318] ACPI: APIC 0x00000000DB098000 00015E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.005320] ACPI: SSDT 0x00000000DB0B5000 0010AF (v01 AMD QOGIRC 00000001 INTL 20120913) [ 0.005321] ACPI: Reserving FACP table memory at [mem 0xdb0b7000-0xdb0b7113] ACPI: Reserving DSDT table memory at [mem 0xdb090000-0xdb0970d1] ACPI: Reserving FACS table memory at [mem 0xdcb9f000-0xdcb9f03f] ACPI: Reserving SSDT table memory at [mem 0xdb0bd000-0xdb0bd929] ACPI: Reserving SSDT table memory at [mem 0xdb0b9000-0xdb0bcb7d] ACPI: Reserving SSDT table memory at [mem 0xdb0b8000-0xdb0b8163] ACPI: Reserving FIDT table memory at [mem 0xdb0af000-0xdb0af09b] ACPI: Reserving MCFG table memory at [mem 0xdb0ae000-0xdb0ae03b] ACPI: Reserving HPET table memory at [mem 0xdb0ad000-0xdb0ad037] ACPI: Reserving SSDT table memory at [mem 0xdb0ac000-0xdb0ac023] ACPI: Reserving IVRS table memory at [mem 0xdb0ab000-0xdb0ab0cf] ACPI: Reserving FPDT table memory at [mem 0xdb0aa000-0xdb0aa043] ACPI: Reserving PCCT table memory at [mem 0xdb0a9000-0xdb0a906d] ACPI: Reserving SSDT table memory at [mem 0xdb0a2000-0xdb0a803a] ACPI: Reserving CRAT table memory at [mem 0xdb0a0000-0xdb0a16cf] ACPI: Reserving CDIT table memory at [mem 0xdb09f000-0xdb09f028] ACPI: Reserving BGRT table memory at [mem 0xdb09e000-0xdb09e037] ACPI: Reserving SSDT table memory at [mem 0xdb09a000-0xdb09d7af] ACPI: Reserving WSMT table memory at [mem 0xdb099000-0xdb099027] ACPI: Reserving APIC table memory at [mem 0xdb098000-0xdb09815d] ACPI: Reserving SSDT table memory at [mem 0xdb0b5000-0xdb0b60ae] No NUMA configuration found [ 0.005382] Faking a node at [mem 0x0000000000000000-0x000000081f2fffff] NODE_DATA(0) allocated [mem 0x81f2d5000-0x81f2fffff] Zone ranges: [ 0.005567] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000081f2fffff] Device empty [ 0.005571] Movable zone start for each node [ 0.005574] Early memory node ranges [ 0.005574] node 0: [mem 0x0000000000001000-0x000000000009ffff] node 0: [mem 0x0000000000100000-0x0000000009d81fff] node 0: [mem 0x000000000a000000-0x000000000a1fffff] node 0: [mem 0x000000000a211000-0x00000000cb059fff] node 0: [mem 0x00000000cb05b000-0x00000000cb086fff] node 0: [mem 0x00000000cb088000-0x00000000daca5fff] node 0: [mem 0x00000000ddbff000-0x00000000deffffff] node 0: [mem 0x0000000100000000-0x000000081f2fffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000081f2fffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.005606] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.005789] On node 0, zone DMA32: 638 pages in unavailable ranges [ 0.010316] On node 0, zone DMA32: 17 pages in unavailable ranges [ 0.010322] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.010689] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.010815] On node 0, zone DMA32: 12121 pages in unavailable ranges [ 0.011050] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.011082] On node 0, zone Normal: 3328 pages in unavailable ranges [ 0.011871] ACPI: PM-Timer IO Port: 0x808 [ 0.011878] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.011889] IOAPIC[0]: apic_id 25, version 33, address 0xfec00000, GSI 0-23 [ 0.011894] IOAPIC[1]: apic_id 26, version 33, address 0xfec01000, GSI 24-55 [ 0.011895] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.011897] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.011900] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.011900] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.011913] e820: update [mem 0xd7a95000-0xd7af1fff] usable ==> reserved [ 0.011924] smpboot: Allowing 24 CPUs, 0 hotplug CPUs [ 0.011952] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x09d82000-0x09ffffff] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a210fff] PM: hibernation: Registered nosave memory: [mem 0xcb05a000-0xcb05afff] PM: hibernation: Registered nosave memory: [mem 0xcb087000-0xcb087fff] PM: hibernation: Registered nosave memory: [mem 0xd7a95000-0xd7af1fff] PM: hibernation: Registered nosave memory: [mem 0xdaca6000-0xdb059fff] PM: hibernation: Registered nosave memory: [mem 0xdb05a000-0xdb0bdfff] PM: hibernation: Registered nosave memory: [mem 0xdb0be000-0xdcbbdfff] PM: hibernation: Registered nosave memory: [mem 0xdcbbe000-0xddb56fff] PM: hibernation: Registered nosave memory: [mem 0xddb57000-0xddbfefff] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfd1fffff] PM: hibernation: Registered nosave memory: [mem 0xfd200000-0xfd2fffff] PM: hibernation: Registered nosave memory: [mem 0xfd300000-0xfd3fffff] PM: hibernation: Registered nosave memory: [mem 0xfd400000-0xfd5fffff] PM: hibernation: Registered nosave memory: [mem 0xfd600000-0xfe9fffff] PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] PM: hibernation: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] PM: hibernation: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0xe0000000-0xefffffff] available for PCI devices [ 0.011980] Booting paravirtualized kernel on bare hardware [ 0.011982] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.015099] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1 [ 0.015787] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144 [ 0.015794] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152 [ 0.015795] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.015802] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [ 0.015833] Fallback order for Node 0: 0 [ 0.015836] Built 1 zonelists, mobility grouping on. Total pages: 8237393 [ 0.015837] Policy zone: Normal [ 0.015838] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-7-amd64 root=UUID=HASH_1F7-665B-3EEB-2EB6-950EDB8F224D ro quiet [ 0.015870] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-7-amd64", will be passed to user space. [ 0.015894] random: crng init done [ 0.015894] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.015895] printk: log_buf_len total cpu_extra contributions: 94208 bytes [ 0.015895] printk: log_buf_len min size: 131072 bytes [ 0.016027] printk: log_buf_len: 262144 bytes [ 0.016027] printk: early log buf free: 116824(89%) [ 0.018559] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.019783] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.019849] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.019880] software IO TLB: area num 32. [ 0.045738] Memory: 3476340K/33473236K available (14342K kernel code, 2324K rwdata, 12920K rodata, 2768K init, 17444K bss, 895528K reserved, 0K cma-reserved) [ 0.045848] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1 [ 0.045859] ftrace: allocating 39969 entries in 157 pages [ 0.050553] ftrace: allocated 157 pages with 5 groups [ 0.051067] Dynamic Preempt: voluntary [ 0.051101] rcu: Preemptible hierarchical RCU implementation. [ 0.051101] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=24. [ 0.051103] Trampoline variant of Tasks RCU enabled. [ 0.051103] Rude variant of Tasks RCU enabled. [ 0.051104] Tracing variant of Tasks RCU enabled. [ 0.051104] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.051105] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24 [ 0.053993] NR_IRQS: 524544, nr_irqs: 1160, preallocated irqs: 16 [ 0.054156] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.054209] Console: colour dummy device 80x25 [ 0.054221] printk: console [tty0] enabled [ 0.054237] ACPI: Core revision 20220331 [ 0.054321] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.054336] APIC: Switch to symmetric I/O mode setup [ 0.055163] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0 [ 0.371886] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.371900] Switched APIC routing to physical flat. [ 0.372500] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.390355] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d8af67c922, max_idle_ns: 881590436590 ns [ 0.390358] Calibrating delay loop (skipped), value calculated using timer frequency.. 7599.53 BogoMIPS (lpj=15199068) [ 0.390360] pid_max: default: 32768 minimum: 301 [ 0.394313] LSM: Security Framework initializing [ 0.394323] landlock: Up and running. [ 0.394323] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.394339] AppArmor: AppArmor initialized [ 0.394341] TOMOYO Linux initialized [ 0.394344] LSM support for eBPF active [ 0.394394] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.394436] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.394584] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.394627] LVT offset 1 assigned for vector 0xf9 [ 0.394750] LVT offset 2 assigned for vector 0xf4 [ 0.394780] process: using mwait in idle threads [ 0.394781] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.394782] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 [ 0.394784] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.394785] Spectre V2 : Mitigation: Retpolines [ 0.394786] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.394786] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.394787] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.394787] RETBleed: Mitigation: untrained return thunk [ 0.394788] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.394789] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation [ 0.394790] Spectre V2 : User space: Mitigation: STIBP always-on protection [ 0.394790] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.399712] Freeing SMP alternatives memory: 36K [ 0.509432] smpboot: CPU0: AMD Ryzen 9 3900XT 12-Core Processor (family: 0x17, model: 0x71, stepping: 0x0) [ 0.509503] cblist_init_generic: Setting adjustable number of callback queues. [ 0.509506] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.509518] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.509527] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.509535] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.509547] ... version: 0 [ 0.509548] ... bit width: 48 [ 0.509548] ... generic registers: 6 [ 0.509548] ... value mask: 0000ffffffffffff [ 0.509549] ... max period: 00007fffffffffff [ 0.509550] ... fixed-purpose events: 0 [ 0.509550] ... event mask: 000000000000003f [ 0.509611] rcu: Hierarchical SRCU implementation. [ 0.509611] rcu: Max phase no-delay instances is 1000. [ 0.509875] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.509990] smp: Bringing up secondary CPUs ... [ 0.510045] x86: Booting SMP configuration: [ 0.510046] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 [ 0.532602] Spectre V2 : Update user space SMT mitigation: STIBP always-on [ 0.532602] #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 [ 0.558386] smp: Brought up 1 node, 24 CPUs [ 0.558386] smpboot: Max logical packages: 1 [ 0.558386] smpboot: Total of 24 processors activated (182388.81 BogoMIPS) [ 0.595117] node 0 deferred pages initialised in 36ms [ 0.595463] devtmpfs: initialized [ 0.595463] x86/mm: Memory block size: 128MB [ 0.598874] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a210fff] (69632 bytes) [ 0.598874] ACPI: PM: Registering ACPI NVS region [mem 0xdb0be000-0xdcbbdfff] (28311552 bytes) [ 0.598874] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.598874] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.598874] pinctrl core: initialized pinctrl subsystem [ 0.599235] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.599606] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.599932] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.600244] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.600262] thermal_sys: Registered thermal governor 'fair_share' [ 0.600262] thermal_sys: Registered thermal governor 'bang_bang' [ 0.600262] thermal_sys: Registered thermal governor 'step_wise' [ 0.600262] thermal_sys: Registered thermal governor 'user_space' [ 0.600262] thermal_sys: Registered thermal governor 'power_allocator' [ 0.600262] cpuidle: using governor ladder [ 0.600262] cpuidle: using governor menu [ 0.600262] Detected 1 PCC Subspaces [ 0.600262] Registering PCC driver as Mailbox controller [ 0.600262] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.600262] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.600262] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.600262] PCI: Using configuration type 1 for base access [ 0.600262] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.602374] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.602374] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.602374] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.602374] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.602416] ACPI: Added _OSI(Module Device) [ 0.602417] ACPI: Added _OSI(Processor Device) [ 0.602418] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.602418] ACPI: Added _OSI(Processor Aggregator Device) [ 0.607100] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.607991] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.608530] ACPI: Interpreter enabled [ 0.608543] ACPI: PM: (supports S0 S3 S4 S5) [ 0.608543] ACPI: Using IOAPIC for interrupt routing [ 0.608757] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.608758] PCI: Using E820 reservations for host bridge windows [ 0.608963] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.614936] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.614939] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 0.615350] PCI host bridge to bus 0000:00 [ 0.615352] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfcffffff window] pci_bus 0000:00: root bus resource [mem 0x820000000-0x7fffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 [ 0.615455] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 [ 0.615535] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 [ 0.615589] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400 [ 0.615659] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.615775] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 [ 0.615843] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.615983] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 [ 0.616040] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 [ 0.616094] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 [ 0.616173] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.616300] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 [ 0.616357] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 [ 0.616413] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 [ 0.616465] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 [ 0.616524] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.616622] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 [ 0.616673] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 [ 0.616737] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.616862] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.616964] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.617081] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 [ 0.617114] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 [ 0.617141] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 [ 0.617167] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 [ 0.617193] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 [ 0.617220] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 [ 0.617246] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 [ 0.617272] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 [ 0.617347] pci 0000:01:00.0: [15b7:5011] type 00 class 0x010802 [ 0.617362] pci 0000:01:00.0: reg 0x10: [mem 0xfcc00000-0xfcc03fff 64bit] pci 0000:00:01.1: PCI bridge to [bus 01] pci 0000:00:01.1: bridge window [mem 0xfcc00000-0xfccfffff] pci 0000:20:00.0: [1022:57ad] type 01 class 0x060400 [ 0.617765] pci 0000:20:00.0: PME# supported from D0 D3hot D3cold [ 0.617862] pci 0000:20:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16.0 GT/s PCIe x8 link) [ 0.617986] pci 0000:00:01.2: PCI bridge to [bus 20-2c] pci 0000:00:01.2: bridge window [io 0xc000-0xefff] pci 0000:00:01.2: bridge window [mem 0xfc200000-0xfc9fffff] pci 0000:21:00.0: [1022:57a3] type 01 class 0x060400 [ 0.618143] pci 0000:21:00.0: PME# supported from D0 D3hot D3cold [ 0.618143] pci 0000:21:03.0: [1022:57a3] type 01 class 0x060400 [ 0.618143] pci 0000:21:03.0: PME# supported from D0 D3hot D3cold [ 0.618143] pci 0000:21:04.0: [1022:57a3] type 01 class 0x060400 [ 0.618143] pci 0000:21:04.0: PME# supported from D0 D3hot D3cold [ 0.618143] pci 0000:21:05.0: [1022:57a3] type 01 class 0x060400 [ 0.618143] pci 0000:21:05.0: PME# supported from D0 D3hot D3cold [ 0.618143] pci 0000:21:08.0: [1022:57a4] type 01 class 0x060400 [ 0.618143] pci 0000:21:08.0: PME# supported from D0 D3hot D3cold [ 0.618143] pci 0000:21:09.0: [1022:57a4] type 01 class 0x060400 [ 0.618235] pci 0000:21:09.0: PME# supported from D0 D3hot D3cold [ 0.618485] pci 0000:21:0a.0: [1022:57a4] type 01 class 0x060400 [ 0.618710] pci 0000:21:0a.0: PME# supported from D0 D3hot D3cold [ 0.618935] pci 0000:20:00.0: PCI bridge to [bus 21-2c] pci 0000:20:00.0: bridge window [io 0xc000-0xefff] pci 0000:20:00.0: bridge window [mem 0xfc200000-0xfc9fffff] pci 0000:22:00.0: [1987:5012] type 00 class 0x010802 [ 0.619129] pci 0000:22:00.0: reg 0x10: [mem 0xfc900000-0xfc903fff 64bit] pci 0000:21:00.0: PCI bridge to [bus 22] pci 0000:21:00.0: bridge window [mem 0xfc900000-0xfc9fffff] pci 0000:25:00.0: [197b:0585] type 00 class 0x010601 [ 0.619995] pci 0000:25:00.0: reg 0x10: [io 0xe200-0xe27f] pci 0000:25:00.0: reg 0x14: [io 0xe180-0xe1ff] pci 0000:25:00.0: reg 0x18: [io 0xe100-0xe17f] pci 0000:25:00.0: reg 0x1c: [io 0xe080-0xe0ff] pci 0000:25:00.0: reg 0x20: [io 0xe000-0xe07f] pci 0000:25:00.0: reg 0x24: [mem 0xfc810000-0xfc811fff] pci 0000:25:00.0: reg 0x30: [mem 0xfc800000-0xfc80ffff pref] pci 0000:25:00.0: PME# supported from D3hot [ 0.620427] pci 0000:21:03.0: PCI bridge to [bus 25] pci 0000:21:03.0: bridge window [io 0xe000-0xefff] pci 0000:21:03.0: bridge window [mem 0xfc800000-0xfc8fffff] pci 0000:26:00.0: [1b21:0612] type 00 class 0x010601 [ 0.620567] pci 0000:26:00.0: reg 0x10: [io 0xd050-0xd057] pci 0000:26:00.0: reg 0x14: [io 0xd040-0xd043] pci 0000:26:00.0: reg 0x18: [io 0xd030-0xd037] pci 0000:26:00.0: reg 0x1c: [io 0xd020-0xd023] pci 0000:26:00.0: reg 0x20: [io 0xd000-0xd01f] pci 0000:26:00.0: reg 0x24: [mem 0xfc700000-0xfc7001ff] pci 0000:21:04.0: PCI bridge to [bus 26] pci 0000:21:04.0: bridge window [io 0xd000-0xdfff] pci 0000:21:04.0: bridge window [mem 0xfc700000-0xfc7fffff] pci 0000:27:00.0: [10ec:8168] type 00 class 0x020000 [ 0.620962] pci 0000:27:00.0: reg 0x10: [io 0xc000-0xc0ff] pci 0000:27:00.0: reg 0x18: [mem 0xfc604000-0xfc604fff 64bit] pci 0000:27:00.0: reg 0x20: [mem 0xfc600000-0xfc603fff 64bit] pci 0000:27:00.0: supports D1 D2 [ 0.621146] pci 0000:27:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.621391] pci 0000:21:05.0: PCI bridge to [bus 27] pci 0000:21:05.0: bridge window [io 0xc000-0xcfff] pci 0000:21:05.0: bridge window [mem 0xfc600000-0xfc6fffff] pci 0000:2a:00.0: [1022:1485] type 00 class 0x130000 [ 0.621742] pci 0000:2a:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.622035] pci 0000:2a:00.1: [1022:149c] type 00 class 0x0c0330 [ 0.622338] pci 0000:2a:00.1: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit] pci 0000:2a:00.1: PME# supported from D0 D3hot D3cold [ 0.624053] pci 0000:2a:00.3: [1022:149c] type 00 class 0x0c0330 [ 0.624078] pci 0000:2a:00.3: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit] pci 0000:2a:00.3: PME# supported from D0 D3hot D3cold [ 0.624348] pci 0000:21:08.0: PCI bridge to [bus 2a] pci 0000:21:08.0: bridge window [mem 0xfc200000-0xfc3fffff] pci 0000:2b:00.0: [1022:7901] type 00 class 0x010601 [ 0.624523] pci 0000:2b:00.0: reg 0x24: [mem 0xfc500000-0xfc5007ff] pci 0000:2b:00.0: PME# supported from D3hot D3cold [ 0.624721] pci 0000:2b:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.624814] pci 0000:21:09.0: PCI bridge to [bus 2b] pci 0000:21:09.0: bridge window [mem 0xfc500000-0xfc5fffff] pci 0000:2c:00.0: [1022:7901] type 00 class 0x010601 [ 0.624989] pci 0000:2c:00.0: reg 0x24: [mem 0xfc400000-0xfc4007ff] pci 0000:2c:00.0: PME# supported from D3hot D3cold [ 0.625187] pci 0000:2c:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.625278] pci 0000:21:0a.0: PCI bridge to [bus 2c] pci 0000:21:0a.0: bridge window [mem 0xfc400000-0xfc4fffff] pci 0000:2d:00.0: [10de:1f07] type 00 class 0x030000 [ 0.625397] pci 0000:2d:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff] pci 0000:2d:00.0: reg 0x14: [mem 0x7fe0000000-0x7fefffffff 64bit pref] pci 0000:2d:00.0: reg 0x1c: [mem 0x7ff0000000-0x7ff1ffffff 64bit pref] pci 0000:2d:00.0: reg 0x24: [io 0xf000-0xf07f] pci 0000:2d:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref] pci 0000:2d:00.0: BAR 1: assigned to efifb [ 0.625506] pci 0000:2d:00.0: PME# supported from D0 D3hot [ 0.625584] pci 0000:2d:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:03.1 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.625688] pci 0000:2d:00.1: [10de:10f9] type 00 class 0x040300 [ 0.625700] pci 0000:2d:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff] pci 0000:2d:00.2: [10de:1ada] type 00 class 0x0c0330 [ 0.625851] pci 0000:2d:00.2: reg 0x10: [mem 0x7ff2000000-0x7ff203ffff 64bit pref] pci 0000:2d:00.2: reg 0x1c: [mem 0x7ff2040000-0x7ff204ffff 64bit pref] pci 0000:2d:00.2: PME# supported from D0 D3hot [ 0.625992] pci 0000:2d:00.3: [10de:1adb] type 00 class 0x0c8000 [ 0.626004] pci 0000:2d:00.3: reg 0x10: [mem 0xfc084000-0xfc084fff] pci 0000:2d:00.3: PME# supported from D0 D3hot [ 0.626171] pci 0000:00:03.1: PCI bridge to [bus 2d] pci 0000:00:03.1: bridge window [io 0xf000-0xffff] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff] pci 0000:00:03.1: bridge window [mem 0x7fe0000000-0x7ff20fffff 64bit pref] pci 0000:2e:00.0: [1022:148a] type 00 class 0x130000 [ 0.626406] pci 0000:00:07.1: PCI bridge to [bus 2e] pci 0000:2f:00.0: [1022:1485] type 00 class 0x130000 [ 0.626628] pci 0000:2f:00.3: [1022:149c] type 00 class 0x0c0330 [ 0.626641] pci 0000:2f:00.3: reg 0x10: [mem 0xfca00000-0xfcafffff 64bit] pci 0000:2f:00.3: PME# supported from D0 D3hot D3cold [ 0.626803] pci 0000:2f:00.4: [1022:1487] type 00 class 0x040300 [ 0.626812] pci 0000:2f:00.4: reg 0x10: [mem 0xfcb00000-0xfcb07fff] pci 0000:2f:00.4: PME# supported from D0 D3hot D3cold [ 0.626971] pci 0000:00:08.1: PCI bridge to [bus 2f] pci 0000:00:08.1: bridge window [mem 0xfca00000-0xfcbfffff] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.627259] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.627283] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.627313] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.627343] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.627368] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.627390] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.627413] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.630387] iommu: Default domain type: Translated [ 0.630387] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.630412] EDAC MC: Ver: 3.0.0 [ 0.630551] Registered efivars operations [ 0.630551] NetLabel: Initializing [ 0.630551] NetLabel: domain hash size = 128 [ 0.630551] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.630551] NetLabel: unlabeled traffic allowed by default [ 0.630551] PCI: Using ACPI for IRQ routing [ 0.631950] PCI: pci_cache_line_size set to 64 bytes [ 0.632068] e820: reserve RAM buffer [mem 0x09d82000-0x0bffffff] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] e820: reserve RAM buffer [mem 0xcb05a000-0xcbffffff] e820: reserve RAM buffer [mem 0xcb087000-0xcbffffff] e820: reserve RAM buffer [mem 0xd7a95000-0xd7ffffff] e820: reserve RAM buffer [mem 0xdaca6000-0xdbffffff] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] e820: reserve RAM buffer [mem 0x81f300000-0x81fffffff] pci 0000:2d:00.0: vgaarb: setting as boot VGA device [ 0.634378] pci 0000:2d:00.0: vgaarb: bridge control possible [ 0.634378] pci 0000:2d:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.634378] vgaarb: loaded [ 0.634381] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.634384] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.636447] clocksource: Switched to clocksource tsc-early [ 0.636533] VFS: Disk quotas dquot_6.6.0 [ 0.636544] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.636544] AppArmor: AppArmor Filesystem Enabled [ 0.636544] pnp: PnP ACPI init [ 0.636544] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.636544] system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved [ 0.636544] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.636544] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.636544] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.636544] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.636544] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.636544] system 00:04: [io 0x040b] has been reserved [ 0.636544] system 00:04: [io 0x04d6] has been reserved [ 0.636544] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.636544] system 00:04: [io 0x0c14] has been reserved [ 0.636544] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.636544] system 00:04: [io 0x0c52] has been reserved [ 0.636544] system 00:04: [io 0x0c6c] has been reserved [ 0.636544] system 00:04: [io 0x0c6f] has been reserved [ 0.636544] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.636544] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.636544] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.636544] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.636544] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.636544] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.636544] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.636544] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.636544] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.636544] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.636544] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.636544] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.636544] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.636544] pnp: PnP ACPI: found 5 devices [ 0.640727] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.640770] NET: Registered PF_INET protocol family [ 0.640960] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.642717] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.642750] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.642907] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.643238] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.643333] TCP: Hash tables configured (established 262144 bind 65536) [ 0.643450] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.643513] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.643579] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.643647] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.643651] NET: Registered PF_XDP protocol family [ 0.643662] pci 0000:00:01.1: PCI bridge to [bus 01] pci 0000:00:01.1: bridge window [mem 0xfcc00000-0xfccfffff] pci 0000:21:00.0: PCI bridge to [bus 22] pci 0000:21:00.0: bridge window [mem 0xfc900000-0xfc9fffff] pci 0000:21:03.0: PCI bridge to [bus 25] pci 0000:21:03.0: bridge window [io 0xe000-0xefff] pci 0000:21:03.0: bridge window [mem 0xfc800000-0xfc8fffff] pci 0000:21:04.0: PCI bridge to [bus 26] pci 0000:21:04.0: bridge window [io 0xd000-0xdfff] pci 0000:21:04.0: bridge window [mem 0xfc700000-0xfc7fffff] pci 0000:21:05.0: PCI bridge to [bus 27] pci 0000:21:05.0: bridge window [io 0xc000-0xcfff] pci 0000:21:05.0: bridge window [mem 0xfc600000-0xfc6fffff] pci 0000:21:08.0: PCI bridge to [bus 2a] pci 0000:21:08.0: bridge window [mem 0xfc200000-0xfc3fffff] pci 0000:21:09.0: PCI bridge to [bus 2b] pci 0000:21:09.0: bridge window [mem 0xfc500000-0xfc5fffff] pci 0000:21:0a.0: PCI bridge to [bus 2c] pci 0000:21:0a.0: bridge window [mem 0xfc400000-0xfc4fffff] pci 0000:20:00.0: PCI bridge to [bus 21-2c] pci 0000:20:00.0: bridge window [io 0xc000-0xefff] pci 0000:20:00.0: bridge window [mem 0xfc200000-0xfc9fffff] pci 0000:00:01.2: PCI bridge to [bus 20-2c] pci 0000:00:01.2: bridge window [io 0xc000-0xefff] pci 0000:00:01.2: bridge window [mem 0xfc200000-0xfc9fffff] pci 0000:00:03.1: PCI bridge to [bus 2d] pci 0000:00:03.1: bridge window [io 0xf000-0xffff] pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff] pci 0000:00:03.1: bridge window [mem 0x7fe0000000-0x7ff20fffff 64bit pref] pci 0000:00:07.1: PCI bridge to [bus 2e] pci 0000:00:08.1: PCI bridge to [bus 2f] pci 0000:00:08.1: bridge window [mem 0xfca00000-0xfcbfffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfcffffff window] pci_bus 0000:00: resource 10 [mem 0x820000000-0x7fffffffff window] pci_bus 0000:01: resource 1 [mem 0xfcc00000-0xfccfffff] pci_bus 0000:20: resource 0 [io 0xc000-0xefff] pci_bus 0000:20: resource 1 [mem 0xfc200000-0xfc9fffff] pci_bus 0000:21: resource 0 [io 0xc000-0xefff] pci_bus 0000:21: resource 1 [mem 0xfc200000-0xfc9fffff] pci_bus 0000:22: resource 1 [mem 0xfc900000-0xfc9fffff] pci_bus 0000:25: resource 0 [io 0xe000-0xefff] pci_bus 0000:25: resource 1 [mem 0xfc800000-0xfc8fffff] pci_bus 0000:26: resource 0 [io 0xd000-0xdfff] pci_bus 0000:26: resource 1 [mem 0xfc700000-0xfc7fffff] pci_bus 0000:27: resource 0 [io 0xc000-0xcfff] pci_bus 0000:27: resource 1 [mem 0xfc600000-0xfc6fffff] pci_bus 0000:2a: resource 1 [mem 0xfc200000-0xfc3fffff] pci_bus 0000:2b: resource 1 [mem 0xfc500000-0xfc5fffff] pci_bus 0000:2c: resource 1 [mem 0xfc400000-0xfc4fffff] pci_bus 0000:2d: resource 0 [io 0xf000-0xffff] pci_bus 0000:2d: resource 1 [mem 0xfb000000-0xfc0fffff] pci_bus 0000:2d: resource 2 [mem 0x7fe0000000-0x7ff20fffff 64bit pref] pci_bus 0000:2f: resource 1 [mem 0xfca00000-0xfcbfffff] pci 0000:2d:00.1: D0 power state depends on 0000:2d:00.0 [ 0.644230] pci 0000:2d:00.2: D0 power state depends on 0000:2d:00.0 [ 0.644303] pci 0000:2d:00.3: D0 power state depends on 0000:2d:00.0 [ 0.644377] PCI: CLS 64 bytes, default 64 [ 0.644385] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.644411] pci 0000:00:01.0: Adding to iommu group 0 [ 0.644419] pci 0000:00:01.1: Adding to iommu group 1 [ 0.644421] Trying to unpack rootfs image as initramfs... [ 0.644427] pci 0000:00:01.2: Adding to iommu group 2 [ 0.644438] pci 0000:00:02.0: Adding to iommu group 3 [ 0.644450] pci 0000:00:03.0: Adding to iommu group 4 [ 0.644459] pci 0000:00:03.1: Adding to iommu group 5 [ 0.644469] pci 0000:00:04.0: Adding to iommu group 6 [ 0.644479] pci 0000:00:05.0: Adding to iommu group 7 [ 0.644490] pci 0000:00:07.0: Adding to iommu group 8 [ 0.644498] pci 0000:00:07.1: Adding to iommu group 9 [ 0.644509] pci 0000:00:08.0: Adding to iommu group 10 [ 0.644517] pci 0000:00:08.1: Adding to iommu group 11 [ 0.644533] pci 0000:00:14.0: Adding to iommu group 12 [ 0.644540] pci 0000:00:14.3: Adding to iommu group 12 [ 0.644574] pci 0000:00:18.0: Adding to iommu group 13 [ 0.644582] pci 0000:00:18.1: Adding to iommu group 13 [ 0.644589] pci 0000:00:18.2: Adding to iommu group 13 [ 0.644597] pci 0000:00:18.3: Adding to iommu group 13 [ 0.644605] pci 0000:00:18.4: Adding to iommu group 13 [ 0.644612] pci 0000:00:18.5: Adding to iommu group 13 [ 0.644619] pci 0000:00:18.6: Adding to iommu group 13 [ 0.644626] pci 0000:00:18.7: Adding to iommu group 13 [ 0.644634] pci 0000:01:00.0: Adding to iommu group 14 [ 0.644642] pci 0000:20:00.0: Adding to iommu group 15 [ 0.644674] pci 0000:21:00.0: Adding to iommu group 16 [ 0.644704] pci 0000:21:03.0: Adding to iommu group 17 [ 0.644734] pci 0000:21:04.0: Adding to iommu group 18 [ 0.644767] pci 0000:21:05.0: Adding to iommu group 19 [ 0.644779] pci 0000:21:08.0: Adding to iommu group 20 [ 0.644789] pci 0000:21:09.0: Adding to iommu group 21 [ 0.644801] pci 0000:21:0a.0: Adding to iommu group 22 [ 0.644832] pci 0000:22:00.0: Adding to iommu group 23 [ 0.644863] pci 0000:25:00.0: Adding to iommu group 24 [ 0.644893] pci 0000:26:00.0: Adding to iommu group 25 [ 0.644924] pci 0000:27:00.0: Adding to iommu group 26 [ 0.644926] pci 0000:2a:00.0: Adding to iommu group 20 [ 0.644929] pci 0000:2a:00.1: Adding to iommu group 20 [ 0.644931] pci 0000:2a:00.3: Adding to iommu group 20 [ 0.644935] pci 0000:2b:00.0: Adding to iommu group 21 [ 0.644938] pci 0000:2c:00.0: Adding to iommu group 22 [ 0.644958] pci 0000:2d:00.0: Adding to iommu group 27 [ 0.644968] pci 0000:2d:00.1: Adding to iommu group 27 [ 0.644977] pci 0000:2d:00.2: Adding to iommu group 27 [ 0.644986] pci 0000:2d:00.3: Adding to iommu group 27 [ 0.644995] pci 0000:2e:00.0: Adding to iommu group 28 [ 0.645004] pci 0000:2f:00.0: Adding to iommu group 29 [ 0.645013] pci 0000:2f:00.3: Adding to iommu group 30 [ 0.645023] pci 0000:2f:00.4: Adding to iommu group 31 [ 0.648458] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.648462] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC [ 0.648466] AMD-Vi: Interrupt remapping enabled [ 0.648562] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.648566] software IO TLB: mapped [mem 0x00000000cf538000-0x00000000d3538000] (64MB) [ 0.648602] LVT offset 0 assigned for vector 0x400 [ 0.648901] perf: AMD IBS detected (0x000003ff) [ 0.648907] amd_uncore: 4 amd_df counters detected [ 0.648911] amd_uncore: 6 amd_l3 counters detected [ 0.649362] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.649861] Initialise system trusted keyrings [ 0.649869] Key type blacklist registered [ 0.649890] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.650826] zbud: loaded [ 0.650988] integrity: Platform Keyring initialized [ 0.650990] integrity: Machine keyring initialized [ 0.650991] Key type asymmetric registered [ 0.650992] Asymmetric key parser 'x509' registered [ 0.972978] Freeing initrd memory: 55620K [ 0.976079] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.976094] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.976130] io scheduler mq-deadline registered [ 0.977616] pcieport 0000:00:01.1: AER: enabled with IRQ 28 [ 0.977749] pcieport 0000:00:01.2: AER: enabled with IRQ 29 [ 0.977869] pcieport 0000:00:03.1: AER: enabled with IRQ 30 [ 0.978033] pcieport 0000:00:07.1: AER: enabled with IRQ 32 [ 0.978142] pcieport 0000:00:08.1: AER: enabled with IRQ 33 [ 0.979824] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.982041] Estimated ratio of average max frequency by base frequency (times 1024): 1155 [ 0.982051] Monitor-Mwait will be used to enter C-1 state [ 0.982056] ACPI: \_PR_.C000: Found 2 idle states [ 0.982129] ACPI: \_PR_.C002: Found 2 idle states [ 0.982215] ACPI: \_PR_.C004: Found 2 idle states [ 0.982295] ACPI: \_PR_.C006: Found 2 idle states [ 0.982373] ACPI: \_PR_.C008: Found 2 idle states [ 0.982450] ACPI: \_PR_.C00A: Found 2 idle states [ 0.982530] ACPI: \_PR_.C00C: Found 2 idle states [ 0.982612] ACPI: \_PR_.C00E: Found 2 idle states [ 0.982676] ACPI: \_PR_.C010: Found 2 idle states [ 0.982736] ACPI: \_PR_.C012: Found 2 idle states [ 0.982809] ACPI: \_PR_.C014: Found 2 idle states [ 0.982895] ACPI: \_PR_.C016: Found 2 idle states [ 0.982955] ACPI: \_PR_.C001: Found 2 idle states [ 0.983035] ACPI: \_PR_.C003: Found 2 idle states [ 0.983112] ACPI: \_PR_.C005: Found 2 idle states [ 0.983192] ACPI: \_PR_.C007: Found 2 idle states [ 0.983274] ACPI: \_PR_.C009: Found 2 idle states [ 0.983354] ACPI: \_PR_.C00B: Found 2 idle states [ 0.983434] ACPI: \_PR_.C00D: Found 2 idle states [ 0.983514] ACPI: \_PR_.C00F: Found 2 idle states [ 0.983596] ACPI: \_PR_.C011: Found 2 idle states [ 0.983675] ACPI: \_PR_.C013: Found 2 idle states [ 0.983756] ACPI: \_PR_.C015: Found 2 idle states [ 0.983838] ACPI: \_PR_.C017: Found 2 idle states [ 0.984041] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.984314] Linux agpgart interface v0.103 [ 0.984907] AMD-Vi: AMD IOMMUv2 loaded and initialized [ 0.985904] i8042: PNP: No PS/2 controller found. [ 0.985937] mousedev: PS/2 mouse device common for all mice [ 0.985948] rtc_cmos 00:02: RTC can wake from S4 [ 0.986130] rtc_cmos 00:02: registered as rtc0 [ 0.986157] rtc_cmos 00:02: setting system clock to 2023-04-04T09:09:15 UTC (1680599355) [ 0.986177] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.986306] ledtrig-cpu: registered to indicate activity on CPUs [ 0.986442] efifb: probing for efifb [ 0.986453] efifb: framebuffer at 0x7fe0000000, using 3072k, total 3072k [ 0.986454] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.986455] efifb: scrolling: redraw [ 0.986456] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.986510] Console: switching to colour frame buffer device 128x48 [ 0.987602] fb0: EFI VGA frame buffer device [ 1.003821] NET: Registered PF_INET6 protocol family [ 1.006342] Segment Routing with IPv6 [ 1.006346] In-situ OAM (IOAM) with IPv6 [ 1.006357] mip6: Mobile IPv6 [ 1.006359] NET: Registered PF_PACKET protocol family [ 1.006380] mpls_gso: MPLS GSO support [ 1.007454] microcode: CPU0: patch_level=0x08701021 [ 1.007459] microcode: CPU1: patch_level=0x08701021 [ 1.007464] microcode: CPU2: patch_level=0x08701021 [ 1.007469] microcode: CPU3: patch_level=0x08701021 [ 1.007474] microcode: CPU4: patch_level=0x08701021 [ 1.007479] microcode: CPU5: patch_level=0x08701021 [ 1.007486] microcode: CPU6: patch_level=0x08701021 [ 1.007491] microcode: CPU7: patch_level=0x08701021 [ 1.007496] microcode: CPU8: patch_level=0x08701021 [ 1.007501] microcode: CPU9: patch_level=0x08701021 [ 1.007504] microcode: CPU10: patch_level=0x08701021 [ 1.007508] microcode: CPU11: patch_level=0x08701021 [ 1.007513] microcode: CPU12: patch_level=0x08701021 [ 1.007518] microcode: CPU13: patch_level=0x08701021 [ 1.007522] microcode: CPU14: patch_level=0x08701021 [ 1.007527] microcode: CPU15: patch_level=0x08701021 [ 1.007532] microcode: CPU16: patch_level=0x08701021 [ 1.007536] microcode: CPU17: patch_level=0x08701021 [ 1.007541] microcode: CPU18: patch_level=0x08701021 [ 1.007545] microcode: CPU19: patch_level=0x08701021 [ 1.007550] microcode: CPU20: patch_level=0x08701021 [ 1.007554] microcode: CPU21: patch_level=0x08701021 [ 1.007557] microcode: CPU22: patch_level=0x08701021 [ 1.007562] microcode: CPU23: patch_level=0x08701021 [ 1.007564] microcode: Microcode Update Driver: v2.2. [ 1.007730] resctrl: L3 allocation detected [ 1.007731] resctrl: MB allocation detected [ 1.007732] resctrl: L3 monitoring detected [ 1.007735] IPI shorthand broadcast: enabled [ 1.007752] sched_clock: Marking stable (695550191, 312174293)->(1014384048, -6659564) [ 1.008298] registered taskstats version 1 [ 1.008305] Loading compiled-in X.509 certificates [ 1.018900] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.018909] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 1.020069] zswap: loaded using pool lzo/zbud [ 1.020156] Key type .fscrypt registered [ 1.020157] Key type fscrypt-provisioning registered [ 1.022118] Key type encrypted registered [ 1.022120] AppArmor: AppArmor sha1 policy hashing enabled [ 1.022193] integrity: Loading X.509 certificate: UEFI:db [ 1.022210] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.022211] integrity: Loading X.509 certificate: UEFI:db [ 1.022222] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.022433] blacklist: Problem blacklisting hash (-13) [ 1.022449] blacklist: Problem blacklisting hash (-13) [ 1.022490] blacklist: Problem blacklisting hash (-13) [ 1.022527] blacklist: Problem blacklisting hash (-13) [ 1.022572] blacklist: Problem blacklisting hash (-13) [ 1.022603] blacklist: Problem blacklisting hash (-13) [ 1.022801] ima: No TPM chip found, activating TPM-bypass! [ 1.022803] ima: Allocated hash algorithm: sha256 [ 1.022811] ima: No architecture policies found [ 1.022820] evm: Initialising EVM extended attributes: [ 1.022820] evm: security.selinux [ 1.022821] evm: security.SMACK64 (disabled) [ 1.022822] evm: security.SMACK64EXEC (disabled) [ 1.022822] evm: security.SMACK64TRANSMUTE (disabled) [ 1.022823] evm: security.SMACK64MMAP (disabled) [ 1.022823] evm: security.apparmor [ 1.022824] evm: security.ima [ 1.022824] evm: security.capability [ 1.022825] evm: HMAC attrs: 0x1 [ 1.080082] Freeing unused decrypted memory: 2036K [ 1.080396] Freeing unused kernel image (initmem) memory: 2768K [ 1.101702] Write protecting the kernel read-only data: 30720k [ 1.102049] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 1.102209] Freeing unused kernel image (rodata/data gap) memory: 1416K [ 1.139624] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.139627] Run /init as init process [ 1.139628] with arguments: [ 1.139629] /init [ 1.139630] with environment: [ 1.139630] HOME=/ [ 1.139631] TERM=linux [ 1.139631] BOOT_IMAGE=/boot/vmlinuz-6.1.0-7-amd64 [ 1.209054] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.209088] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.217423] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.217426] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.217466] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.222113] SCSI subsystem initialized [ 1.226647] ACPI: bus type USB registered [ 1.226667] usbcore: registered new interface driver usbfs [ 1.226674] usbcore: registered new interface driver hub [ 1.226687] usbcore: registered new device driver usb [ 1.229833] ACPI: button: Power Button [PWRF] nvme nvme0: pci function 0000:01:00.0 [ 1.236943] r8169 0000:27:00.0: enabling device (0000 -> 0003) [ 1.236969] nvme nvme1: pci function 0000:22:00.0 [ 1.237203] libata version 3.00 loaded. [ 1.246301] nvme nvme1: missing or invalid SUBNQN field. [ 1.246317] nvme nvme1: Shutdown timeout set to 10 seconds [ 1.247268] ACPI: bus type drm_connector registered [ 1.247818] nvme nvme1: 8/0/0 default/read/poll queues [ 1.248544] nvme nvme1: Ignoring bogus Namespace Identifiers [ 1.249662] nvme1n1: p4 [ 1.253091] r8169 0000:27:00.0 eth0: RTL8168h/8111h, 2FB77A7220B812A23E8D3081A04E3807, XID 541, IRQ 54 [ 1.253093] r8169 0000:27:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] nvme nvme0: 24/0/0 default/read/poll queues [ 1.257283] nvme0n1: p1 p2 p3 p4 p5 p6 [ 1.258149] r8169 0000:27:00.0 enp39s0: renamed from eth0 [ 1.258617] xhci_hcd 0000:2a:00.1: xHCI Host Controller [ 1.258621] xhci_hcd 0000:2a:00.1: new USB bus registered, assigned bus number 1 [ 1.258779] xhci_hcd 0000:2a:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 1.259460] xhci_hcd 0000:2a:00.1: xHCI Host Controller [ 1.259463] xhci_hcd 0000:2a:00.1: new USB bus registered, assigned bus number 2 [ 1.259465] xhci_hcd 0000:2a:00.1: Host supports USB 3.1 Enhanced SuperSpeed [ 1.259492] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.259494] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.259495] usb usb1: Product: xHCI Host Controller [ 1.259496] usb usb1: Manufacturer: Linux 6.1.0-7-amd64 xhci-hcd [ 1.259497] usb usb1: SerialNumber: ... [ 1.259576] hub 1-0:1.0: USB hub found [ 1.259587] hub 1-0:1.0: 6 ports detected [ 1.259792] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.259805] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.259806] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.259807] usb usb2: Product: xHCI Host Controller [ 1.259808] usb usb2: Manufacturer: Linux 6.1.0-7-amd64 xhci-hcd [ 1.259809] usb usb2: SerialNumber: ... [ 1.259875] hub 2-0:1.0: USB hub found [ 1.259883] hub 2-0:1.0: 4 ports detected [ 1.259951] usb: port power management may be unreliable [ 1.260047] xhci_hcd 0000:2a:00.3: xHCI Host Controller [ 1.260050] xhci_hcd 0000:2a:00.3: new USB bus registered, assigned bus number 3 [ 1.260206] xhci_hcd 0000:2a:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 1.260566] xhci_hcd 0000:2a:00.3: xHCI Host Controller [ 1.260568] xhci_hcd 0000:2a:00.3: new USB bus registered, assigned bus number 4 [ 1.260569] xhci_hcd 0000:2a:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.260593] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.260595] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.260596] usb usb3: Product: xHCI Host Controller [ 1.260596] usb usb3: Manufacturer: Linux 6.1.0-7-amd64 xhci-hcd [ 1.260597] usb usb3: SerialNumber: ... [ 1.260710] hub 3-0:1.0: USB hub found [ 1.260722] hub 3-0:1.0: 6 ports detected [ 1.261053] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.261066] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.261068] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.261069] usb usb4: Product: xHCI Host Controller [ 1.261069] usb usb4: Manufacturer: Linux 6.1.0-7-amd64 xhci-hcd [ 1.261070] usb usb4: SerialNumber: ... [ 1.261165] hub 4-0:1.0: USB hub found [ 1.261174] hub 4-0:1.0: 4 ports detected [ 1.261524] ahci 0000:25:00.0: version 3.0 [ 1.261588] xhci_hcd 0000:2d:00.2: xHCI Host Controller [ 1.261591] xhci_hcd 0000:2d:00.2: new USB bus registered, assigned bus number 5 [ 1.261715] ahci 0000:25:00.0: SSS flag set, parallel bus scan disabled [ 1.261760] ahci 0000:25:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x3 impl SATA mode [ 1.261763] ahci 0000:25:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh [ 1.262104] scsi host0: ahci [ 1.262206] xhci_hcd 0000:2d:00.2: hcc params 0x0180ff05 hci version 0x110 quirks 0x0000000000000010 [ 1.262206] scsi host1: ahci [ 1.262289] scsi host2: ahci [ 1.262353] xhci_hcd 0000:2d:00.2: xHCI Host Controller [ 1.262355] xhci_hcd 0000:2d:00.2: new USB bus registered, assigned bus number 6 [ 1.262357] xhci_hcd 0000:2d:00.2: Host supports USB 3.1 Enhanced SuperSpeed [ 1.262392] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.262393] scsi host3: ahci [ 1.262393] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.262395] usb usb5: Product: xHCI Host Controller [ 1.262397] usb usb5: Manufacturer: Linux 6.1.0-7-amd64 xhci-hcd [ 1.262397] usb usb5: SerialNumber: ... [ 1.262481] hub 5-0:1.0: USB hub found [ 1.262487] hub 5-0:1.0: 2 ports detected [ 1.262511] scsi host4: ahci [ 1.262546] ata1: SATA max UDMA/133 abar m8192@0xfc810000 port 0xfc810100 irq 90 [ 1.262549] ata2: SATA max UDMA/133 abar m8192@0xfc810000 port 0xfc810180 irq 91 [ 1.262550] ata3: DUMMY [ 1.262550] ata4: DUMMY [ 1.262551] ata5: DUMMY [ 1.262577] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.262591] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.262592] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.262593] usb usb6: Product: xHCI Host Controller [ 1.262594] usb usb6: Manufacturer: Linux 6.1.0-7-amd64 xhci-hcd [ 1.262595] usb usb6: SerialNumber: ... [ 1.262649] hub 6-0:1.0: USB hub found [ 1.262657] hub 6-0:1.0: 4 ports detected [ 1.262674] ahci 0000:26:00.0: SSS flag set, parallel bus scan disabled [ 1.262721] ahci 0000:26:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.262723] ahci 0000:26:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc [ 1.262805] xhci_hcd 0000:2f:00.3: xHCI Host Controller [ 1.262808] xhci_hcd 0000:2f:00.3: new USB bus registered, assigned bus number 7 [ 1.262922] xhci_hcd 0000:2f:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410 [ 1.262957] scsi host5: ahci [ 1.263052] scsi host6: ahci [ 1.263084] ata6: SATA max UDMA/133 abar m512@0xfc700000 port 0xfc700100 irq 99 [ 1.263087] ata7: SATA max UDMA/133 abar m512@0xfc700000 port 0xfc700180 irq 99 [ 1.263220] ahci 0000:2b:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.263222] ahci 0000:2b:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.263255] xhci_hcd 0000:2f:00.3: xHCI Host Controller [ 1.263257] xhci_hcd 0000:2f:00.3: new USB bus registered, assigned bus number 8 [ 1.263262] xhci_hcd 0000:2f:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.263283] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.263285] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.263286] usb usb7: Product: xHCI Host Controller [ 1.263287] usb usb7: Manufacturer: Linux 6.1.0-7-amd64 xhci-hcd [ 1.263288] usb usb7: SerialNumber: ... [ 1.263427] scsi host7: ahci [ 1.263431] hub 7-0:1.0: USB hub found [ 1.263437] hub 7-0:1.0: 4 ports detected [ 1.263522] ata8: SATA max UDMA/133 abar m2048@0xfc500000 port 0xfc500100 irq 109 [ 1.263659] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.263673] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.263674] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.263675] usb usb8: Product: xHCI Host Controller [ 1.263676] usb usb8: Manufacturer: Linux 6.1.0-7-amd64 xhci-hcd [ 1.263676] usb usb8: SerialNumber: ... [ 1.263732] hub 8-0:1.0: USB hub found [ 1.263738] hub 8-0:1.0: 4 ports detected [ 1.263860] ahci 0000:2c:00.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x33 impl SATA mode [ 1.263862] ahci 0000:2c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.264298] scsi host8: ahci [ 1.264373] scsi host9: ahci [ 1.264452] scsi host10: ahci [ 1.264515] scsi host11: ahci [ 1.264588] scsi host12: ahci [ 1.264652] scsi host13: ahci [ 1.264703] ata9: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400100 irq 110 [ 1.264706] ata10: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400180 irq 111 [ 1.264707] ata11: DUMMY [ 1.264708] ata12: DUMMY [ 1.264710] ata13: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400300 irq 114 [ 1.264712] ata14: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400380 irq 115 [ 1.514416] usb 3-5: new full-speed USB device number 2 using xhci_hcd [ 1.514423] usb 1-5: new high-speed USB device number 2 using xhci_hcd [ 1.518360] usb 7-3: new full-speed USB device number 2 using xhci_hcd [ 1.580522] ata8: SATA link down (SStatus 0 SControl 300) [ 1.674481] tsc: Refined TSC clocksource calibration: 3799.998 MHz [ 1.674490] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d8cab05ec1, max_idle_ns: 881590646801 ns [ 1.674687] clocksource: Switched to clocksource tsc [ 1.680771] usb 1-5: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.44 [ 1.680774] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.680776] usb 1-5: Product: 4-Port USB 2.0 Hub [ 1.680777] usb 1-5: Manufacturer: Generic [ 1.682753] usb 3-5: New USB device found, idVendor=1462, idProduct=7c37, bcdDevice= 0.01 [ 1.682756] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.682757] usb 3-5: Product: MYSTIC LIGHT [ 1.682758] usb 3-5: Manufacturer: MSI [ 1.682759] usb 3-5: SerialNumber: ... [ 1.700446] usb 7-3: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 [ 1.700450] usb 7-3: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 1.700451] usb 7-3: Product: CSR8510 A10 [ 1.740706] hub 1-5:1.0: USB hub found [ 1.742023] hub 1-5:1.0: 4 ports detected [ 1.742497] ata13: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.742527] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.742553] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.742649] ata14: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.742650] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.742664] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.742946] ata10.00: ATA-9: WDC WD121KFBX-68EF5N0, 83.00A83, max UDMA/133 [ 1.743053] ata13.00: ATA-9: WDC WD60EFRX-68L0BN1, 82.00A82, max UDMA/133 [ 1.743236] ata9.00: ATA-9: WDC WD60EFRX-68L0BN1, 82.00A82, max UDMA/133 [ 1.743237] ata6.00: ATA-9: WDC WD80EFZX-68UW8N0, 83.H0A83, max UDMA/133 [ 1.743245] ata1.00: ATA-9: WDC WD80EFZX-68UW8N0, 83.H0A83, max UDMA/133 [ 1.743342] ata14.00: ATA-9: WDC WD60EFRX-68L0BN1, 82.00A82, max UDMA/133 [ 1.743852] ata13.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.743857] ata9.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.744177] ata14.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.744940] ata9.00: configured for UDMA/133 [ 1.744981] ata13.00: configured for UDMA/133 [ 1.745638] ata14.00: configured for UDMA/133 [ 1.747375] ata1.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 1.747378] ata1.00: Features: NCQ-prio [ 1.747380] ata6.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.747383] ata6.00: Features: NCQ-prio [ 1.751289] ata10.00: 23437770752 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.751293] ata10.00: Features: NCQ-sndrcv NCQ-prio [ 1.754672] ata1.00: configured for UDMA/133 [ 1.754678] ata6.00: configured for UDMA/133 [ 1.754791] scsi 0:0:0:0: Direct-Access ATA WDC WD80EFZX-68U 0A83 PQ: 0 ANSI: 5 [ 1.762848] ata10.00: configured for UDMA/133 [ 1.803920] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.818791] usb 3-6: new high-speed USB device number 3 using xhci_hcd [ 1.823729] usb 2-1: New USB device found, idVendor=152d, idProduct=0567, bcdDevice= 4.04 [ 1.823733] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.823734] usb 2-1: Product: JMS579 [ 1.823735] usb 2-1: Manufacturer: JMicron [ 1.823736] usb 2-1: SerialNumber: ... [ 1.950789] usb 1-6: new high-speed USB device number 3 using xhci_hcd [ 1.969875] usb 3-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70 [ 1.969880] usb 3-6: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.969882] usb 3-6: Product: USB2.0 Hub [ 2.029579] hub 3-6:1.0: USB hub found [ 2.030124] hub 3-6:1.0: 4 ports detected [ 2.101629] usb 1-6: New USB device found, idVendor=03f0, idProduct=1a53, bcdDevice= 1.00 [ 2.101634] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.101635] usb 1-6: Product: DeskJet 4100 series [ 2.101636] usb 1-6: Manufacturer: HP [ 2.101637] usb 1-6: SerialNumber: ... [ 2.178793] usb 1-5.3: new low-speed USB device number 4 using xhci_hcd [ 2.230792] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.231912] ata2.00: ATA-9: WDC WD80EFZX-68UW8N0, 83.H0A83, max UDMA/133 [ 2.236398] ata2.00: 15628053168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.236401] ata2.00: Features: NCQ-prio [ 2.243591] ata2.00: configured for UDMA/133 [ 2.243727] scsi 1:0:0:0: Direct-Access ATA WDC WD80EFZX-68U 0A83 PQ: 0 ANSI: 5 [ 2.244196] scsi 5:0:0:0: Direct-Access ATA WDC WD80EFZX-68U 0A83 PQ: 0 ANSI: 5 [ 2.292750] usb 1-5.3: New USB device found, idVendor=18f8, idProduct=0fc0, bcdDevice= 1.00 [ 2.292755] usb 1-5.3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 2.292757] usb 1-5.3: Product: USB GAMING MOUSE [ 2.318789] usb 3-6.2: new high-speed USB device number 4 using xhci_hcd [ 2.462787] usb 1-5.4: new low-speed USB device number 5 using xhci_hcd [ 2.580746] usb 1-5.4: New USB device found, idVendor=0c45, idProduct=7603, bcdDevice= 1.06 [ 2.580752] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.580753] usb 1-5.4: Product: USB Keyboard [ 2.580755] usb 1-5.4: Manufacturer: SONiX [ 2.639143] usb 3-6.2: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 2.639148] usb 3-6.2: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.639149] usb 3-6.2: SerialNumber: ... [ 2.718498] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.719605] ata7.00: ATA-9: WDC WD80EFZX-68UW8N0, 83.H0A83, max UDMA/133 [ 2.724073] ata7.00: 15628053168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.724076] ata7.00: Features: NCQ-prio [ 2.731510] ata7.00: configured for UDMA/133 [ 2.731642] scsi 6:0:0:0: Direct-Access ATA WDC WD80EFZX-68U 0A83 PQ: 0 ANSI: 5 [ 2.731965] scsi 8:0:0:0: Direct-Access ATA WDC WD60EFRX-68L 0A82 PQ: 0 ANSI: 5 [ 2.732272] scsi 9:0:0:0: Direct-Access ATA WDC WD121KFBX-68 0A83 PQ: 0 ANSI: 5 [ 2.732525] scsi 12:0:0:0: Direct-Access ATA WDC WD60EFRX-68L 0A82 PQ: 0 ANSI: 5 [ 2.732724] scsi 13:0:0:0: Direct-Access ATA WDC WD60EFRX-68L 0A82 PQ: 0 ANSI: 5 [ 2.739133] sd 0:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 2.739135] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.739144] sd 0:0:0:0: [sda] Write Protect is off [ 2.739147] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.739163] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.739166] sd 1:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 2.739168] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.739181] sd 1:0:0:0: [sdb] Write Protect is off [ 2.739183] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.739185] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 2.739197] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.739203] sd 8:0:0:0: [sdd] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 2.739205] sd 8:0:0:0: [sdd] 4096-byte physical blocks [ 2.739213] sd 6:0:0:0: [sdc] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 2.739215] sd 6:0:0:0: [sdc] 4096-byte physical blocks [ 2.739216] sd 8:0:0:0: [sdd] Write Protect is off [ 2.739217] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.739219] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.739221] sd 5:0:0:0: [sde] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ 2.739222] sd 9:0:0:0: [sdf] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) [ 2.739224] sd 5:0:0:0: [sde] 4096-byte physical blocks [ 2.739225] sd 9:0:0:0: [sdf] 4096-byte physical blocks [ 2.739227] sd 6:0:0:0: [sdc] Write Protect is off [ 2.739229] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.739231] sd 13:0:0:0: [sdh] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 2.739233] sd 12:0:0:0: [sdg] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 2.739233] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.739234] sd 13:0:0:0: [sdh] 4096-byte physical blocks [ 2.739235] sd 9:0:0:0: [sdf] Write Protect is off [ 2.739235] sd 5:0:0:0: [sde] Write Protect is off [ 2.739237] sd 9:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 2.739237] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2.739238] sd 12:0:0:0: [sdg] 4096-byte physical blocks [ 2.739244] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.739244] sd 13:0:0:0: [sdh] Write Protect is off [ 2.739247] sd 13:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 2.739250] sd 12:0:0:0: [sdg] Write Protect is off [ 2.739251] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.739253] sd 12:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 2.739256] sd 8:0:0:0: [sdd] Preferred minimum I/O size 4096 bytes [ 2.739256] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.739267] sd 13:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.739268] sd 6:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 2.739274] sd 5:0:0:0: [sde] Preferred minimum I/O size 4096 bytes [ 2.739274] sd 12:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.739282] sd 9:0:0:0: [sdf] Preferred minimum I/O size 4096 bytes [ 2.739289] sd 13:0:0:0: [sdh] Preferred minimum I/O size 4096 bytes [ 2.739300] sd 12:0:0:0: [sdg] Preferred minimum I/O size 4096 bytes [ 2.745314] hid: raw HID events driver (C) Jiri Kosina [ 2.745815] usb-storage 2-1:1.0: USB Mass Storage device detected [ 2.745892] usb-storage 2-1:1.0: Quirks match for vid 152d pid 0567: 5000000 [ 2.745915] scsi host14: usb-storage 2-1:1.0 [ 2.745994] usbcore: registered new interface driver usb-storage [ 2.777682] usbcore: registered new interface driver usbhid [ 2.777684] usbhid: USB HID core driver [ 2.782365] usb 3-6.4: new full-speed USB device number 5 using xhci_hcd [ 2.807271] sdf: sdf1 [ 2.807338] sd 9:0:0:0: [sdf] Attached SCSI disk [ 2.808195] sdd: sdd1 [ 2.808263] sd 8:0:0:0: [sdd] Attached SCSI disk [ 2.809700] sdg: sdg1 [ 2.809766] sd 12:0:0:0: [sdg] Attached SCSI disk [ 2.816986] sdh: sdh1 [ 2.817046] sd 13:0:0:0: [sdh] Attached SCSI disk [ 2.824508] sdc: sdc1 [ 2.824563] sd 6:0:0:0: [sdc] Attached SCSI disk [ 2.826820] sdb: sdb1 [ 2.826867] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.828700] sde: sde1 [ 2.828760] sd 5:0:0:0: [sde] Attached SCSI disk [ 2.830568] sda: sda1 [ 2.830613] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.831985] usbcore: registered new interface driver uas [ 2.832260] input: MSI MYSTIC LIGHT as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.3/usb3/3-5/3-5:1.0/0003:1462:7C37.0001/input/input2 [ 2.832374] hid-generic 0003:1462:7C37.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [MSI MYSTIC LIGHT ] on usb-0000:2a:00.3-5/input0 [ 2.832466] input: USB GAMING MOUSE as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-5/1-5.3/1-5.3:1.0/0003:18F8:0FC0.0002/input/input3 [ 2.832526] hid-generic 0003:18F8:0FC0.0002: input,hidraw1: USB HID v1.10 Mouse [USB GAMING MOUSE ] on usb-0000:2a:00.1-5.3/input0 [ 2.832675] input: USB GAMING MOUSE Keyboard as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-5/1-5.3/1-5.3:1.1/0003:18F8:0FC0.0003/input/input4 [ 2.866383] usb 3-6.4: device descriptor read/64, error -32 [ 2.894399] hid-generic 0003:18F8:0FC0.0003: input,hiddev1,hidraw2: USB HID v1.10 Keyboard [USB GAMING MOUSE ] on usb-0000:2a:00.1-5.3/input1 [ 2.894477] input: SONiX USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-5/1-5.4/1-5.4:1.0/0003:0C45:7603.0004/input/input6 [ 2.954438] hid-generic 0003:0C45:7603.0004: input,hidraw3: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-0000:2a:00.1-5.4/input0 [ 2.954596] input: SONiX USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-5/1-5.4/1-5.4:1.1/0003:0C45:7603.0005/input/input7 [ 2.968958] nouveau 0000:2d:00.0: enabling device (0002 -> 0003) [ 2.969122] Console: switching to colour dummy device 80x25 [ 2.969151] nouveau 0000:2d:00.0: vgaarb: deactivate vga console [ 2.969178] nouveau 0000:2d:00.0: NVIDIA TU106 (166000a1) [ 3.014390] input: SONiX USB Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-5/1-5.4/1-5.4:1.1/0003:0C45:7603.0005/input/input8 [ 3.014412] input: SONiX USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.1/usb1/1-5/1-5.4/1-5.4:1.1/0003:0C45:7603.0005/input/input10 [ 3.014456] hid-generic 0003:0C45:7603.0005: input,hiddev2,hidraw4: USB HID v1.11 Keyboard [SONiX USB Keyboard] on usb-0000:2a:00.1-5.4/input1 [ 3.066398] usb 3-6.4: device descriptor read/64, error -32 [ 3.083611] nouveau 0000:2d:00.0: bios: version 90.06.2e.80.aa [ 3.083801] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/nvdec/scrubber.bin [ 3.083816] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/acr/bl.bin [ 3.083827] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/acr/ucode_ahesasc.bin [ 3.083838] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/acr/bl.bin [ 3.083849] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/acr/ucode_asb.bin [ 3.083860] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/acr/unload_bl.bin [ 3.083870] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/acr/ucode_unload.bin [ 3.083874] nouveau 0000:2d:00.0: pmu: firmware unavailable [ 3.083930] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/fecs_bl.bin [ 3.083940] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/fecs_inst.bin [ 3.083948] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/fecs_data.bin [ 3.083958] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/fecs_sig.bin [ 3.083970] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/gpccs_bl.bin [ 3.083978] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/gpccs_inst.bin [ 3.083985] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/gpccs_data.bin [ 3.083993] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/gpccs_sig.bin [ 3.084004] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/sw_nonctx.bin [ 3.084015] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/sw_ctx.bin [ 3.084025] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/sw_bundle_init.bin [ 3.084036] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/gr/sw_method_init.bin [ 3.084053] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/sec2/sig.bin [ 3.084067] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/sec2/image.bin [ 3.084080] nouveau 0000:2d:00.0: firmware: direct-loading firmware nvidia/tu106/sec2/desc.bin [ 3.084374] nouveau 0000:2d:00.0: fb: 8192 MiB GDDR6 [ 3.104616] nouveau 0000:2d:00.0: DRM: VRAM: 8192 MiB [ 3.104617] nouveau 0000:2d:00.0: DRM: GART: 536870912 MiB [ 3.104618] nouveau 0000:2d:00.0: DRM: BIT table 'A' not found [ 3.104619] nouveau 0000:2d:00.0: DRM: BIT table 'L' not found [ 3.104620] nouveau 0000:2d:00.0: DRM: TMDS table version 2.0 [ 3.104621] nouveau 0000:2d:00.0: DRM: DCB version 4.1 [ 3.104622] nouveau 0000:2d:00.0: DRM: DCB outp 00: 02800f66 04600020 [ 3.104623] nouveau 0000:2d:00.0: DRM: DCB outp 01: 02000f62 00020020 [ 3.104624] nouveau 0000:2d:00.0: DRM: DCB outp 02: 02011f52 00020010 [ 3.104625] nouveau 0000:2d:00.0: DRM: DCB outp 03: 04022f72 00020010 [ 3.104626] nouveau 0000:2d:00.0: DRM: DCB outp 04: 04833f86 04600020 [ 3.104627] nouveau 0000:2d:00.0: DRM: DCB outp 05: 04033f82 00020020 [ 3.104628] nouveau 0000:2d:00.0: DRM: DCB outp 06: 01044f32 00020030 [ 3.104629] nouveau 0000:2d:00.0: DRM: DCB conn 00: 00020046 [ 3.104630] nouveau 0000:2d:00.0: DRM: DCB conn 01: 00010161 [ 3.104630] nouveau 0000:2d:00.0: DRM: DCB conn 02: 01000261 [ 3.104631] nouveau 0000:2d:00.0: DRM: DCB conn 03: 02000346 [ 3.104632] nouveau 0000:2d:00.0: DRM: DCB conn 04: 00001431 [ 3.105916] nouveau 0000:2d:00.0: DRM: MM: using COPY for buffer copies [ 3.254371] usb 3-6.4: new full-speed USB device number 6 using xhci_hcd [ 3.334397] usb 3-6.4: device descriptor read/64, error -32 [ 3.522397] usb 3-6.4: device descriptor read/64, error -32 [ 3.630768] usb 3-6-port4: attempt power cycle [ 3.761555] scsi 14:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.01 PQ: 0 ANSI: 0 [ 3.775291] sr 14:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.775293] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.795101] nouveau 0000:2d:00.0: DRM: allocated 3440x1440 fb: 0x200000, bo 00000000deb279b4 [ 3.798573] fbcon: nouveaudrmfb (fb0) is primary device [ 3.829577] sr 14:0:0:0: Attached scsi CD-ROM sr0 [ 4.040183] Console: switching to colour frame buffer device 215x45 [ 4.234370] usb 3-6.4: new full-speed USB device number 7 using xhci_hcd [ 4.234501] usb 3-6.4: Device not responding to setup address. [ 4.240908] nouveau 0000:2d:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 4.258803] [drm] Initialized nouveau 1.3.1 20120801 for 0000:2d:00.0 on minor 0 [ 4.442457] usb 3-6.4: Device not responding to setup address. [ 4.650486] usb 3-6.4: device not accepting address 7, error -71 [ 4.730494] usb 3-6.4: new full-speed USB device number 8 using xhci_hcd [ 4.731178] usb 3-6.4: Device not responding to setup address. [ 4.939184] usb 3-6.4: Device not responding to setup address. [ 5.146818] usb 3-6.4: device not accepting address 8, error -71 [ 5.147656] usb 3-6-port4: unable to enumerate USB device [ 5.200038] PM: Image not found (code -22) [ 5.272951] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Quota mode: none. [ 5.306133] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 5.437784] pstore: Using crash dump compression: deflate [ 5.439462] pstore: Registered efi as persistent store backend [ 5.441531] loop: module loaded [ 5.443480] EXT4-fs (nvme0n1p4): re-mounted. Quota mode: none. [ 5.444565] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 5.444593] device-mapper: uevent: version 1.0.3 [ 5.444643] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 5.445398] fuse: init (API version 7.37) [ 5.448678] lp: driver loaded but no devices found [ 5.451178] ppdev: user-space parallel port driver [ 5.554784] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.554809] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.554829] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 5.554854] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 5.554881] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 5.554908] sd 9:0:0:0: Attached scsi generic sg5 type 0 [ 5.554925] sd 12:0:0:0: Attached scsi generic sg6 type 0 [ 5.554949] sd 13:0:0:0: Attached scsi generic sg7 type 0 [ 5.554997] sr 14:0:0:0: Attached scsi generic sg8 type 5 [ 5.591987] usblp 1-6:1.1: usblp3: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x1A53 [ 5.592655] usbcore: registered new interface driver usblp [ 5.600405] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 5.600962] mc: Linux media interface: v0.10 [ 5.601924] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 5.601944] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 5.607955] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 5.613926] videodev: Linux video capture interface: v2.00 [ 5.623318] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 5.627857] usb 3-6.2: Found UVC 1.00 device <unnamed> (046d:0825) [ 5.634375] raid6: avx2x4 gen() 30320 MB/s [ 5.638655] snd_hda_intel 0000:2d:00.1: enabling device (0000 -> 0002) [ 5.638715] snd_hda_intel 0000:2d:00.1: Disabling MSI [ 5.638724] snd_hda_intel 0000:2d:00.1: Handle vga_switcheroo audio client [ 5.638800] snd_hda_intel 0000:2f:00.4: enabling device (0000 -> 0002) [ 5.654716] snd_hda_intel 0000:2d:00.1: bound 0000:2d:00.0 (ops nv50_audio_component_bind_ops [nouveau]) [ 5.656889] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 5.656892] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.656894] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.656895] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 5.656896] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 5.656896] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 5.656897] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 5.656898] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 5.656899] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 5.658490] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input12 [ 5.658529] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input13 [ 5.658571] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input14 [ 5.658603] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card0/input15 [ 5.666986] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:01.2/0000:20:00.0/0000:21:08.0/0000:2a:00.3/usb3/3-6/3-6.2/3-6.2:1.0/input/input16 [ 5.667054] usbcore: registered new interface driver uvcvideo [ 5.669603] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card1/input17 [ 5.669651] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card1/input18 [ 5.669684] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card1/input19 [ 5.669723] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card1/input20 [ 5.669752] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card1/input21 [ 5.669783] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card1/input22 [ 5.669815] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:2f:00.4/sound/card1/input23 [ 5.692431] Bluetooth: Core ver 2.22 [ 5.692448] NET: Registered PF_BLUETOOTH protocol family [ 5.692449] Bluetooth: HCI device and connection manager initialized [ 5.692452] Bluetooth: HCI socket layer initialized [ 5.692454] Bluetooth: L2CAP socket layer initialized [ 5.692456] Bluetooth: SCO socket layer initialized [ 5.700073] usbcore: registered new interface driver btusb [ 5.701335] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=6 rev=22bb; LMP ver=6 subver=22bb; manufacturer=10 [ 5.702360] raid6: avx2x2 gen() 34833 MB/s [ 5.770358] raid6: avx2x1 gen() 32236 MB/s [ 5.770360] raid6: using algorithm avx2x2 gen() 34833 MB/s [ 5.838359] raid6: .... xor() 23935 MB/s, rmw enabled [ 5.838360] raid6: using avx2x2 recovery algorithm [ 5.838595] acpi_cpufreq: overriding BIOS provided _PSD data [ 5.838716] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 5.838718] RAPL PMU: hw unit of domain package 2^-16 Joules [ 5.839589] xor: automatically using best checksumming function avx [ 5.840381] cryptd: max_cpu_qlen set to 1000 [ 5.847708] AVX2 version of gcm_enc/dec engaged. [ 5.847747] AES CTR mode by8 optimization enabled [ 5.923470] Adding 36064056k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:36064056k SSFS [ 6.008589] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 6.009263] BTRFS: device label ... devid 1 transid 207 /dev/nvme0n1p6 scanned by (udev-worker) (567) [ 6.023927] SVM: TSC scaling supported [ 6.023929] kvm: Nested Virtualization enabled [ 6.023930] SVM: kvm: Nested Paging enabled [ 6.023931] SEV supported: 509 ASIDs [ 6.023944] SVM: Virtual VMLOAD VMSAVE supported [ 6.023944] SVM: Virtual GIF supported [ 6.023944] SVM: LBR virtualization supported [ 6.030004] MCE: In-kernel MCE decoding enabled. [ 6.034152] intel_rapl_common: Found RAPL domain package [ 6.034155] intel_rapl_common: Found RAPL domain core [ 6.597619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.597621] Bluetooth: BNEP filters: protocol multicast [ 6.597624] Bluetooth: BNEP socket layer initialized [ 6.598414] Bluetooth: MGMT ver 1.22 [ 6.601326] NET: Registered PF_ALG protocol family [ 6.623205] NET: Registered PF_QIPCRTR protocol family [ 6.642566] r8169 0000:27:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw [ 6.648237] usblp3: removed [ 6.670371] Generic FE-GE Realtek PHY r8169-0-2700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-2700:00, irq=MAC) [ 6.854458] r8169 0000:27:00.0 enp39s0: Link is Down [ 7.214363] usb 3-6.2: set resolution quirk: cval->res = 384 [ 7.214528] usbcore: registered new interface driver snd-usb-audio [ 9.054897] Bluetooth: RFCOMM TTY layer initialized [ 9.054904] Bluetooth: RFCOMM socket layer initialized [ 9.054908] Bluetooth: RFCOMM ver 1.11 [ 10.448136] r8169 0000:27:00.0 enp39s0: Link is Up - 1Gbps/Full - flow control off [ 10.448148] IPv6: ADDRCONF(NETDEV_CHANGE): enp39s0: link becomes ready [ 18.558383] usb 3-6.4: new full-speed USB device number 9 using xhci_hcd [ 18.638401] usb 3-6.4: device descriptor read/64, error -32 [ 18.826391] usb 3-6.4: device descriptor read/64, error -32 [ 19.014373] usb 3-6.4: new full-speed USB device number 10 using xhci_hcd [ 19.094386] usb 3-6.4: device descriptor read/64, error -32 [ 19.286387] usb 3-6.4: device descriptor read/64, error -32 [ 19.394732] usb 3-6-port4: attempt power cycle [ 19.500453] usb 3-6.2: reset high-speed USB device number 4 using xhci_hcd [ 20.006369] usb 3-6.4: new full-speed USB device number 11 using xhci_hcd [ 20.006459] usb 3-6.4: Device not responding to setup address. [ 20.218460] usb 3-6.4: Device not responding to setup address. [ 20.426374] usb 3-6.4: device not accepting address 11, error -71 [ 20.510401] usb 3-6.4: new full-speed USB device number 12 using xhci_hcd [ 20.510494] usb 3-6.4: Device not responding to setup address. [ 20.718455] usb 3-6.4: Device not responding to setup address. [ 20.926385] usb 3-6.4: device not accepting address 12, error -71 [ 20.926801] usb 3-6-port4: unable to enumerate USB device [ 475.894579] usb 3-6.4: new full-speed USB device number 13 using xhci_hcd [ 475.974749] usb 3-6.4: device descriptor read/64, error -32 [ 476.162734] usb 3-6.4: device descriptor read/64, error -32 [ 476.359687] usb 3-6.2: reset high-speed USB device number 4 using xhci_hcd [ 476.550575] usb 3-6.4: new full-speed USB device number 14 using xhci_hcd [ 476.630795] usb 3-6.4: device descriptor read/64, error -32 [ 476.819063] usb 3-6.4: device descriptor read/64, error -32 [ 476.927955] usb 3-6-port4: attempt power cycle [ 477.530723] usb 3-6.4: new full-speed USB device number 15 using xhci_hcd [ 477.531497] usb 3-6.4: Device not responding to setup address. [ 477.738719] usb 3-6.4: Device not responding to setup address. [ 477.946747] usb 3-6.4: device not accepting address 15, error -71 [ 478.026846] usb 3-6.4: new full-speed USB device number 16 using xhci_hcd [ 478.026934] usb 3-6.4: Device not responding to setup address. [ 478.234915] usb 3-6.4: Device not responding to setup address. [ 478.442585] usb 3-6.4: device not accepting address 16, error -71 [ 478.442944] usb 3-6-port4: unable to enumerate USB device [ 524.363856] r8169 0000:27:00.0 enp39s0: Link is Down [ 524.751777] PM: suspend entry (deep) [ 524.752942] Filesystems sync: 0.001 seconds [ 524.753067] (NULL device *): firmware: direct-loading firmware nvidia/tu106/nvdec/scrubber.bin [ 524.753075] (NULL device *): firmware: direct-loading firmware nvidia/tu106/acr/bl.bin [ 524.753082] (NULL device *): firmware: direct-loading firmware nvidia/tu106/acr/ucode_ahesasc.bin [ 524.753100] (NULL device *): firmware: direct-loading firmware nvidia/tu106/acr/unload_bl.bin [ 524.753102] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/fecs_bl.bin [ 524.753111] (NULL device *): firmware: direct-loading firmware nvidia/tu106/acr/ucode_asb.bin [ 524.753116] (NULL device *): firmware: direct-loading firmware nvidia/tu106/acr/ucode_unload.bin [ 524.753140] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/fecs_inst.bin [ 524.753175] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/fecs_data.bin [ 524.753203] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/fecs_sig.bin [ 524.753213] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/gpccs_sig.bin [ 524.753213] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/gpccs_bl.bin [ 524.753213] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/gpccs_inst.bin [ 524.753215] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/sw_nonctx.bin [ 524.753215] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/gpccs_data.bin [ 524.753225] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/sw_bundle_init.bin [ 524.753225] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/sw_method_init.bin [ 524.753227] (NULL device *): firmware: direct-loading firmware nvidia/tu106/gr/sw_ctx.bin [ 524.753230] (NULL device *): firmware: direct-loading firmware nvidia/tu106/sec2/sig.bin [ 524.753238] (NULL device *): firmware: direct-loading firmware nvidia/tu106/sec2/desc.bin [ 524.753283] (NULL device *): firmware: direct-loading firmware nvidia/tu106/sec2/image.bin [ 524.753418] Freezing user space processes [ 524.754988] Freezing user space processes completed (elapsed 0.001 seconds) [ 524.754990] OOM killer disabled. [ 524.754991] Freezing remaining freezable tasks [ 524.756113] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 524.756125] printk: Suspending console(s) (use no_console_suspend to debug) [ 524.798232] sd 6:0:0:0: [sdc] Synchronizing SCSI cache [ 524.798247] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 524.798469] sd 6:0:0:0: [sdc] Stopping disk [ 524.798701] sd 1:0:0:0: [sdb] Stopping disk [ 524.806236] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 524.806277] sd 13:0:0:0: [sdh] Synchronizing SCSI cache [ 524.806278] sd 5:0:0:0: [sde] Synchronizing SCSI cache [ 524.806465] sd 0:0:0:0: [sda] Stopping disk [ 524.806511] sd 5:0:0:0: [sde] Stopping disk [ 524.806541] sd 13:0:0:0: [sdh] Stopping disk [ 524.810233] sd 9:0:0:0: [sdf] Synchronizing SCSI cache [ 524.810250] sd 12:0:0:0: [sdg] Synchronizing SCSI cache [ 524.810252] sd 8:0:0:0: [sdd] Synchronizing SCSI cache [ 524.810511] sd 8:0:0:0: [sdd] Stopping disk [ 524.810527] sd 12:0:0:0: [sdg] Stopping disk [ 524.810634] sd 9:0:0:0: [sdf] Stopping disk [ 533.492039] ACPI: PM: Preparing to enter system sleep state S3 [ 533.798596] ACPI: PM: Saving platform NVS memory [ 533.798890] Disabling non-boot CPUs ... [ 533.801635] smpboot: CPU 1 is now offline [ 533.804613] smpboot: CPU 2 is now offline [ 533.807427] smpboot: CPU 3 is now offline [ 533.810211] smpboot: CPU 4 is now offline [ 533.812801] smpboot: CPU 5 is now offline [ 533.815317] smpboot: CPU 6 is now offline [ 533.817978] smpboot: CPU 7 is now offline [ 533.821017] smpboot: CPU 8 is now offline [ 533.823484] smpboot: CPU 9 is now offline [ 533.825721] smpboot: CPU 10 is now offline [ 533.827888] smpboot: CPU 11 is now offline [ 533.830041] smpboot: CPU 12 is now offline [ 533.830467] Spectre V2 : Update user space SMT mitigation: STIBP off [ 533.832143] smpboot: CPU 13 is now offline [ 533.834236] smpboot: CPU 14 is now offline [ 533.836272] smpboot: CPU 15 is now offline [ 533.839700] smpboot: CPU 16 is now offline [ 533.841510] smpboot: CPU 17 is now offline [ 533.843289] smpboot: CPU 18 is now offline [ 533.845040] smpboot: CPU 19 is now offline [ 533.846988] smpboot: CPU 20 is now offline [ 533.848666] smpboot: CPU 21 is now offline [ 533.850322] smpboot: CPU 22 is now offline [ 533.851870] smpboot: CPU 23 is now offline [ 533.852405] ACPI: PM: Low-level resume complete [ 533.852424] ACPI: PM: Restoring platform NVS memory [ 533.852695] LVT offset 0 assigned for vector 0x400 [ 533.853124] Enabling non-boot CPUs ... [ 533.853168] x86: Booting SMP configuration: [ 533.853169] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 533.853396] microcode: CPU1: patch_level=0x08701021 [ 533.855869] ACPI: \_PR_.C002: Found 2 idle states [ 533.859007] CPU1 is up [ 533.859072] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 533.859192] microcode: CPU2: patch_level=0x08701021 [ 533.861373] ACPI: \_PR_.C004: Found 2 idle states [ 533.862962] CPU2 is up [ 533.862980] smpboot: Booting Node 0 Processor 3 APIC 0x8 [ 533.863126] microcode: CPU3: patch_level=0x08701021 [ 533.865339] ACPI: \_PR_.C006: Found 2 idle states [ 533.867023] CPU3 is up [ 533.867044] smpboot: Booting Node 0 Processor 4 APIC 0xa [ 533.867191] microcode: CPU4: patch_level=0x08701021 [ 533.869396] ACPI: \_PR_.C008: Found 2 idle states [ 533.871071] CPU4 is up [ 533.871094] smpboot: Booting Node 0 Processor 5 APIC 0xc [ 533.871237] microcode: CPU5: patch_level=0x08701021 [ 533.873439] ACPI: \_PR_.C00A: Found 2 idle states [ 533.875122] CPU5 is up [ 533.875144] smpboot: Booting Node 0 Processor 6 APIC 0x10 [ 533.875289] microcode: CPU6: patch_level=0x08701021 [ 533.877499] ACPI: \_PR_.C00C: Found 2 idle states [ 533.879201] CPU6 is up [ 533.879222] smpboot: Booting Node 0 Processor 7 APIC 0x12 [ 533.879366] microcode: CPU7: patch_level=0x08701021 [ 533.881571] ACPI: \_PR_.C00E: Found 2 idle states [ 533.883211] CPU7 is up [ 533.883233] smpboot: Booting Node 0 Processor 8 APIC 0x14 [ 533.883385] microcode: CPU8: patch_level=0x08701021 [ 533.885589] ACPI: \_PR_.C010: Found 2 idle states [ 533.887262] CPU8 is up [ 533.887283] smpboot: Booting Node 0 Processor 9 APIC 0x18 [ 533.887429] microcode: CPU9: patch_level=0x08701021 [ 533.889638] ACPI: \_PR_.C012: Found 2 idle states [ 533.891343] CPU9 is up [ 533.891364] smpboot: Booting Node 0 Processor 10 APIC 0x1a [ 533.891516] microcode: CPU10: patch_level=0x08701021 [ 533.893717] ACPI: \_PR_.C014: Found 2 idle states [ 533.895362] CPU10 is up [ 533.895382] smpboot: Booting Node 0 Processor 11 APIC 0x1c [ 533.895533] microcode: CPU11: patch_level=0x08701021 [ 533.897733] ACPI: \_PR_.C016: Found 2 idle states [ 533.899409] CPU11 is up [ 533.899429] smpboot: Booting Node 0 Processor 12 APIC 0x1 [ 533.899585] microcode: CPU12: patch_level=0x08701021 [ 533.901779] ACPI: \_PR_.C001: Found 2 idle states [ 533.903537] Spectre V2 : Update user space SMT mitigation: STIBP always-on [ 533.903542] CPU12 is up [ 533.903571] smpboot: Booting Node 0 Processor 13 APIC 0x3 [ 533.903708] microcode: CPU13: patch_level=0x08701021 [ 533.905899] ACPI: \_PR_.C003: Found 2 idle states [ 533.907582] CPU13 is up [ 533.907599] smpboot: Booting Node 0 Processor 14 APIC 0x5 [ 533.907732] microcode: CPU14: patch_level=0x08701021 [ 533.909923] ACPI: \_PR_.C005: Found 2 idle states [ 533.911640] CPU14 is up [ 533.911656] smpboot: Booting Node 0 Processor 15 APIC 0x9 [ 533.911800] microcode: CPU15: patch_level=0x08701021 [ 533.913999] ACPI: \_PR_.C007: Found 2 idle states [ 533.915735] CPU15 is up [ 533.915755] smpboot: Booting Node 0 Processor 16 APIC 0xb [ 533.915929] microcode: CPU16: patch_level=0x08701021 [ 533.918128] ACPI: \_PR_.C009: Found 2 idle states [ 533.919796] CPU16 is up [ 533.919815] smpboot: Booting Node 0 Processor 17 APIC 0xd [ 533.919989] microcode: CPU17: patch_level=0x08701021 [ 533.922191] ACPI: \_PR_.C00B: Found 2 idle states [ 533.923853] CPU17 is up [ 533.923872] smpboot: Booting Node 0 Processor 18 APIC 0x11 [ 533.924020] microcode: CPU18: patch_level=0x08701021 [ 533.926215] ACPI: \_PR_.C00D: Found 2 idle states [ 533.927964] CPU18 is up [ 533.927985] smpboot: Booting Node 0 Processor 19 APIC 0x13 [ 533.928171] microcode: CPU19: patch_level=0x08701021 [ 533.930372] ACPI: \_PR_.C00F: Found 2 idle states [ 533.932033] CPU19 is up [ 533.932054] smpboot: Booting Node 0 Processor 20 APIC 0x15 [ 533.932234] microcode: CPU20: patch_level=0x08701021 [ 533.934438] ACPI: \_PR_.C011: Found 2 idle states [ 533.936159] CPU20 is up [ 533.936183] smpboot: Booting Node 0 Processor 21 APIC 0x19 [ 533.936331] microcode: CPU21: patch_level=0x08701021 [ 533.938533] ACPI: \_PR_.C013: Found 2 idle states [ 533.940345] CPU21 is up [ 533.940363] smpboot: Booting Node 0 Processor 22 APIC 0x1b [ 533.940555] microcode: CPU22: patch_level=0x08701021 [ 533.942755] ACPI: \_PR_.C015: Found 2 idle states [ 533.944895] CPU22 is up [ 533.944915] smpboot: Booting Node 0 Processor 23 APIC 0x1d [ 533.945104] microcode: CPU23: patch_level=0x08701021 [ 533.947305] ACPI: \_PR_.C017: Found 2 idle states [ 533.952359] CPU23 is up [ 533.954157] ACPI: PM: Waking up from system sleep state S3 [ 533.959811] sd 0:0:0:0: [sda] Starting disk [ 533.959866] sd 1:0:0:0: [sdb] Starting disk [ 533.959868] sd 5:0:0:0: [sde] Starting disk [ 533.959903] sd 6:0:0:0: [sdc] Starting disk [ 533.959905] sd 8:0:0:0: [sdd] Starting disk [ 533.959907] sd 9:0:0:0: [sdf] Starting disk [ 533.959910] sd 12:0:0:0: [sdg] Starting disk [ 533.959912] sd 13:0:0:0: [sdh] Starting disk [ 533.965136] nvme nvme0: 24/0/0 default/read/poll queues [ 533.972529] nvme nvme1: Shutdown timeout set to 10 seconds [ 533.973490] nvme nvme1: 8/0/0 default/read/poll queues [ 533.973891] nvme nvme1: Ignoring bogus Namespace Identifiers [ 534.127376] xhci_hcd 0000:2d:00.2: xHC error in resume, USBSTS 0x401, Reinit [ 534.127379] usb usb5: root hub lost power or was reset [ 534.127380] usb usb6: root hub lost power or was reset [ 534.273153] ata8: SATA link down (SStatus 0 SControl 300) [ 534.311688] usb 3-6.2: reset high-speed USB device number 4 using xhci_hcd [ 539.311143] ata7: found unknown device (class 0) [ 539.311143] ata13: found unknown device (class 0) [ 539.311145] ata2: found unknown device (class 0) [ 539.311172] ata14: found unknown device (class 0) [ 539.311172] ata6: found unknown device (class 0) [ 539.311175] ata1: found unknown device (class 0) [ 539.311200] ata10: found unknown device (class 0) [ 539.311229] ata9: found unknown device (class 0) [ 543.970807] ata14: softreset failed (device not ready) [ 543.970858] ata13: softreset failed (device not ready) [ 543.970858] ata7: softreset failed (device not ready) [ 543.970858] ata2: softreset failed (device not ready) [ 543.970873] ata1: softreset failed (device not ready) [ 543.970873] ata9: softreset failed (device not ready) [ 543.970874] ata6: softreset failed (device not ready) [ 543.970891] ata10: softreset failed (device not ready) [ 544.627062] ata14: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 544.630791] ata14.00: configured for UDMA/133 [ 544.807057] ata13: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 544.810644] ata13.00: configured for UDMA/133 [ 549.326994] ata7: found unknown device (class 0) [ 549.326994] ata9: found unknown device (class 0) [ 549.326995] ata2: found unknown device (class 0) [ 549.327023] ata10: found unknown device (class 0) [ 549.327023] ata6: found unknown device (class 0) [ 549.327025] ata1: found unknown device (class 0) [ 549.486995] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 549.516695] ata1.00: configured for UDMA/133 [ 549.547002] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 549.606996] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 549.686978] ata6.00: configured for UDMA/133 [ 549.710108] ata7.00: configured for UDMA/133 [ 549.846988] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 549.976130] ata2.00: configured for UDMA/133 [ 550.086730] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 550.277290] ata10.00: configured for UDMA/133 [ 551.046716] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 551.050311] ata9.00: configured for UDMA/133 [ 551.087345] OOM killer enabled. [ 551.087346] Restarting tasks ... [ 551.087444] usb 2-1: USB disconnect, device number 2 [ 551.088918] done. [ 551.088928] random: crng reseeded on system resumption [ 551.090867] PM: suspend exit [ 551.122595] Generic FE-GE Realtek PHY r8169-0-2700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-2700:00, irq=MAC) [ 551.170577] usb 3-6.4: new full-speed USB device number 17 using xhci_hcd [ 551.254590] usb 3-6.4: device descriptor read/64, error -32 [ 551.318703] r8169 0000:27:00.0 enp39s0: Link is Down [ 551.438618] usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd [ 551.442604] usb 3-6.4: device descriptor read/64, error -32 [ 551.459207] usb 2-1: New USB device found, idVendor=152d, idProduct=0567, bcdDevice= 4.04 [ 551.459210] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 551.459211] usb 2-1: Product: JMS579 [ 551.459213] usb 2-1: Manufacturer: JMicron [ 551.459214] usb 2-1: SerialNumber: ... [ 551.459534] usb-storage 2-1:1.0: USB Mass Storage device detected [ 551.459625] usb-storage 2-1:1.0: Quirks match for vid 152d pid 0567: 5000000 [ 551.459648] scsi host14: usb-storage 2-1:1.0 [ 551.630573] usb 3-6.4: new full-speed USB device number 18 using xhci_hcd [ 551.710605] usb 3-6.4: device descriptor read/64, error -32 [ 551.898800] usb 3-6.4: device descriptor read/64, error -32 [ 552.007019] usb 3-6-port4: attempt power cycle [ 552.488523] scsi 14:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.01 PQ: 0 ANSI: 0 [ 552.492008] sr 14:0:0:0: Power-on or device reset occurred [ 552.499828] sr 14:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray [ 552.520255] sr 14:0:0:0: Attached scsi CD-ROM sr0 [ 552.520337] sr 14:0:0:0: Attached scsi generic sg8 type 5 [ 552.610560] usb 3-6.4: new full-speed USB device number 19 using xhci_hcd [ 552.610638] usb 3-6.4: Device not responding to setup address. [ 552.818736] usb 3-6.4: Device not responding to setup address. [ 553.026989] usb 3-6.4: device not accepting address 19, error -71 [ 553.106628] usb 3-6.4: new full-speed USB device number 20 using xhci_hcd [ 553.106800] usb 3-6.4: Device not responding to setup address. [ 553.314890] usb 3-6.4: Device not responding to setup address. [ 553.522983] usb 3-6.4: device not accepting address 20, error -71 [ 553.523918] usb 3-6-port4: unable to enumerate USB device [ 555.504846] r8169 0000:27:00.0 enp39s0: Link is Up - 1Gbps/Full - flow control off [ 555.504862] IPv6: ADDRCONF(NETDEV_CHANGE): enp39s0: link becomes ready [ 865.893007] usblp 1-6:1.1: usblp3: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x1A53 [ 866.503476] usb 3-6.4: new full-speed USB device number 21 using xhci_hcd [ 866.583512] usb 3-6.4: device descriptor read/64, error -32 [ 866.771634] usb 3-6.4: device descriptor read/64, error -32 [ 866.980122] usb 3-6.2: reset high-speed USB device number 4 using xhci_hcd [ 867.171649] usb 3-6.4: new full-speed USB device number 22 using xhci_hcd [ 867.251524] usb 3-6.4: device descriptor read/64, error -32 [ 867.439573] usb 3-6.4: device descriptor read/64, error -32 [ 867.547994] usb 3-6-port4: attempt power cycle [ 868.155502] usb 3-6.4: new full-speed USB device number 23 using xhci_hcd [ 868.155620] usb 3-6.4: Device not responding to setup address. [ 868.364016] usb 3-6.4: Device not responding to setup address. [ 868.571496] usb 3-6.4: device not accepting address 23, error -71 [ 868.651888] usb 3-6.4: new full-speed USB device number 24 using xhci_hcd [ 868.651990] usb 3-6.4: Device not responding to setup address. [ 868.860634] usb 3-6.4: Device not responding to setup address. [ 869.059903] watchdog: watchdog0: watchdog did not stop! [ 869.071631] usb 3-6.4: device not accepting address 24, error -71 [ 869.071997] usb 3-6-port4: unable to enumerate USB device