Probe #74d3e2e490 of Acer Aspire ES1-111M

Log: dmesg.1

[ 4.474906] Linux version 6.12.30-1-lts (XXX@XXX) (gcc (GCC) 15.1.1 20250425, GNU ld (GNU Binutils) 2.44.0) #1 SMP PREEMPT_DYNAMIC Thu, 22 May 2025 12:50:32 +0000 [ 4.475005] Command line: initrd=\initramfs-linux-lts.img root=PARTUUID=HASH_AF4-85D9-EEF2-2963-E90806664B9F rootflags=subvol=@ rw rootfstype=btrfs libata.allow_tpm=1 pcie_aspm.policy=powersupersave [ 4.475050] BIOS-provided physical RAM map: [ 4.475089] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable [ 4.475127] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS [ 4.475167] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable [ 4.475223] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved [ 4.475263] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable [ 4.475302] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved [ 4.475341] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable [ 4.475380] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 4.475418] BIOS-e820: [mem 0x0000000020100000-0x0000000077dcbfff] usable [ 4.475457] BIOS-e820: [mem 0x0000000077dcc000-0x00000000787aafff] reserved [ 4.475497] BIOS-e820: [mem 0x00000000787ab000-0x00000000788aafff] ACPI NVS [ 4.475544] BIOS-e820: [mem 0x00000000788ab000-0x00000000788eafff] ACPI data [ 4.475596] BIOS-e820: [mem 0x00000000788eb000-0x00000000794c5fff] usable [ 4.475634] BIOS-e820: [mem 0x00000000794c6000-0x0000000079dc5fff] ACPI NVS [ 4.475671] BIOS-e820: [mem 0x0000000079dc6000-0x0000000079ffffff] usable [ 4.475710] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 4.475747] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 4.475786] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 4.475824] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 4.475864] NX (Execute Disable) protection: active [ 4.475902] APIC: Static calls initialized [ 4.475941] e820: update [mem 0x74eb4018-0x74ec4057] usable ==> usable [ 4.475980] extended physical RAM map: [ 4.476018] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable [ 4.476056] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS [ 4.476094] reserve setup_data: [mem 0x0000000000070000-0x0000000000085fff] usable [ 4.476132] reserve setup_data: [mem 0x0000000000086000-0x000000000009ffff] reserved [ 4.476181] reserve setup_data: [mem 0x0000000000100000-0x000000001effffff] usable [ 4.476219] reserve setup_data: [mem 0x000000001f000000-0x000000001f0fffff] reserved [ 4.476257] reserve setup_data: [mem 0x000000001f100000-0x000000001fffffff] usable [ 4.476296] reserve setup_data: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 4.476334] reserve setup_data: [mem 0x0000000020100000-0x0000000074eb4017] usable [ 4.476372] reserve setup_data: [mem 0x0000000074eb4018-0x0000000074ec4057] usable [ 4.476410] reserve setup_data: [mem 0x0000000074ec4058-0x0000000077dcbfff] usable [ 4.476448] reserve setup_data: [mem 0x0000000077dcc000-0x00000000787aafff] reserved [ 4.476486] reserve setup_data: [mem 0x00000000787ab000-0x00000000788aafff] ACPI NVS [ 4.476525] reserve setup_data: [mem 0x00000000788ab000-0x00000000788eafff] ACPI data [ 4.476578] reserve setup_data: [mem 0x00000000788eb000-0x00000000794c5fff] usable [ 4.476617] reserve setup_data: [mem 0x00000000794c6000-0x0000000079dc5fff] ACPI NVS [ 4.476657] reserve setup_data: [mem 0x0000000079dc6000-0x0000000079ffffff] usable [ 4.480255] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 4.480320] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 4.480359] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 4.480399] reserve setup_data: [mem 0x0000000100000000-0x000000027fffffff] usable [ 4.480460] efi: EFI v2.4 by INSYDE Corp. [ 4.480500] efi: ACPI 2.0=0x788ea014 ESRT=0x78077018 SMBIOS=0x78162000 RNG=0x788cbf18 INITRD=0x74ec9118 [ 4.480539] random: crng init done [ 4.480578] efi: Not removing mem35: MMIO range=[0xe00f8000-0xe00f8fff] (4KB) from e820 map [ 4.480617] efi: Not removing mem36: MMIO range=[0xfed01000-0xfed01fff] (4KB) from e820 map [ 4.480657] efi: Remove mem37: MMIO range=[0xffc00000-0xffffffff] (4MB) from e820 map [ 4.480696] e820: remove [mem 0xffc00000-0xffffffff] reserved [ 4.480735] SMBIOS 2.7 present. [ 4.480776] DMI: Acer Aspire ES1-111M/R2, BIOS V1.16 10/20/2015 [ 4.480814] DMI: Memory slots populated: 1/1 [ 4.480853] tsc: Detected 2166.667 MHz processor [ 4.480891] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 4.480932] e820: remove [mem 0x000a0000-0x000fffff] usable [ 4.480972] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 4.481032] MTRR map: 7 entries (3 fixed + 4 variable; max 19), built from 8 variable MTRRs [ 4.481073] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 4.481115] last_pfn = 0x7a000 max_arch_pfn = 0x400000000 [ 4.481158] esrt: Reserving ESRT space from 0x0000000078077018 to 0x0000000078077050. [ 4.481198] Secure boot disabled [ 4.481237] RAMDISK: [mem 0x728ac000-0x73469fff] ACPI: Early table checksum verification disabled [ 4.481317] ACPI: RSDP 0x00000000788EA014 000024 (v02 ACRSYS) [ 4.481359] ACPI: XSDT 0x00000000788EA120 0000AC (v01 ACRSYS ACRPRDCT 00000003 01000013) [ 4.481412] ACPI: FACP 0x00000000788E7000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000) [ 4.481452] ACPI: DSDT 0x00000000788DA000 008E76 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000) [ 4.481491] ACPI: FACS 0x0000000078874000 000040 [ 4.481532] ACPI: UEFI 0x00000000788E9000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 4.481572] ACPI: MSDM 0x00000000788E8000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 4.481612] ACPI: HPET 0x00000000788E6000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) [ 4.481653] ACPI: APIC 0x00000000788E5000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000) [ 4.481694] ACPI: MCFG 0x00000000788E4000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) [ 4.481735] ACPI: SSDT 0x00000000788E3000 000581 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) [ 4.481789] ACPI: SSDT 0x00000000788D8000 00138A (v01 ACRSYS ACRPRDCT 00000003 1025 00040000) [ 4.481829] ACPI: SSDT 0x00000000788D7000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 4.481870] ACPI: SSDT 0x00000000788D6000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 4.481911] ACPI: SSDT 0x00000000788D5000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000) [ 4.481953] ACPI: UEFI 0x00000000788D4000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000) [ 4.481994] ACPI: SSDT 0x00000000788D0000 003060 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 4.482037] ACPI: CSRT 0x00000000788CF000 00014C (v00 ACRSYS ACRPRDCT 00000005 1025 00040000) [ 4.482077] ACPI: SSDT 0x00000000788CE000 0003E6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000) [ 4.482127] ACPI: FPDT 0x00000000788CD000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000) [ 4.482168] ACPI: BGRT 0x00000000788CC000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000) [ 4.482208] ACPI: Reserving FACP table memory at [mem 0x788e7000-0x788e710b] ACPI: Reserving DSDT table memory at [mem 0x788da000-0x788e2e75] ACPI: Reserving FACS table memory at [mem 0x78874000-0x7887403f] ACPI: Reserving UEFI table memory at [mem 0x788e9000-0x788e9235] ACPI: Reserving MSDM table memory at [mem 0x788e8000-0x788e8054] ACPI: Reserving HPET table memory at [mem 0x788e6000-0x788e6037] ACPI: Reserving APIC table memory at [mem 0x788e5000-0x788e5083] ACPI: Reserving MCFG table memory at [mem 0x788e4000-0x788e403b] ACPI: Reserving SSDT table memory at [mem 0x788e3000-0x788e3580] ACPI: Reserving SSDT table memory at [mem 0x788d8000-0x788d9389] ACPI: Reserving SSDT table memory at [mem 0x788d7000-0x788d7762] ACPI: Reserving SSDT table memory at [mem 0x788d6000-0x788d628f] ACPI: Reserving SSDT table memory at [mem 0x788d5000-0x788d5179] ACPI: Reserving UEFI table memory at [mem 0x788d4000-0x788d4041] ACPI: Reserving SSDT table memory at [mem 0x788d0000-0x788d305f] ACPI: Reserving CSRT table memory at [mem 0x788cf000-0x788cf14b] ACPI: Reserving SSDT table memory at [mem 0x788ce000-0x788ce3e5] ACPI: Reserving FPDT table memory at [mem 0x788cd000-0x788cd043] ACPI: Reserving BGRT table memory at [mem 0x788cc000-0x788cc037] No NUMA configuration found [ 4.483050] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] NODE_DATA(0) allocated [mem 0x27ffd02c0-0x27fffafff] Zone ranges: [ 4.483175] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000027fffffff] Device empty [ 4.486591] Movable zone start for each node [ 4.486647] Early memory node ranges [ 4.486762] node 0: [mem 0x0000000000001000-0x000000000006efff] node 0: [mem 0x0000000000070000-0x0000000000085fff] node 0: [mem 0x0000000000100000-0x000000001effffff] node 0: [mem 0x000000001f100000-0x000000001fffffff] node 0: [mem 0x0000000020100000-0x0000000077dcbfff] node 0: [mem 0x00000000788eb000-0x00000000794c5fff] node 0: [mem 0x0000000079dc6000-0x0000000079ffffff] node 0: [mem 0x0000000100000000-0x000000027fffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 4.488017] On node 0, zone DMA: 1 pages in unavailable ranges [ 4.488056] On node 0, zone DMA: 122 pages in unavailable ranges [ 4.488096] On node 0, zone DMA32: 256 pages in unavailable ranges [ 4.488150] On node 0, zone DMA32: 256 pages in unavailable ranges [ 4.488190] On node 0, zone DMA32: 2847 pages in unavailable ranges [ 4.488230] On node 0, zone DMA32: 2304 pages in unavailable ranges [ 4.488271] On node 0, zone Normal: 24576 pages in unavailable ranges [ 4.488313] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 4.488353] Reserving Intel graphics memory at [mem 0x7b000000-0x7effffff] ACPI: PM-Timer IO Port: 0x408 [ 4.488436] CPU topo: Ignoring hot-pluggable APIC ID 4 in present package. [ 4.489238] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 4.489306] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 4.489346] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 4.489387] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 4.489427] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86 [ 4.489467] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 4.489507] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 4.489548] ACPI: Using ACPI (MADT) for SMP configuration information [ 4.489588] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 4.489639] e820: update [mem 0x76360000-0x763dafff] usable ==> reserved [ 4.489680] TSC deadline timer available [ 4.490485] CPU topo: Max. logical packages: 1 [ 4.490539] CPU topo: Max. logical dies: 1 [ 4.490580] CPU topo: Max. dies per package: 1 [ 4.490621] CPU topo: Max. threads per core: 1 [ 4.490661] CPU topo: Num. cores per package: 2 [ 4.490702] CPU topo: Num. threads per package: 2 [ 4.490743] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs [ 4.490803] CPU topo: Rejected CPUs 2 [ 4.490844] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0006f000-0x0006ffff] PM: hibernation: Registered nosave memory: [mem 0x00086000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x1f000000-0x1f0fffff] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x200fffff] PM: hibernation: Registered nosave memory: [mem 0x76360000-0x763dafff] PM: hibernation: Registered nosave memory: [mem 0x77dcc000-0x788eafff] PM: hibernation: Registered nosave memory: [mem 0x794c6000-0x79dc5fff] PM: hibernation: Registered nosave memory: [mem 0x7a000000-0xffffffff] [mem 0x7f000000-0xe00f7fff] available for PCI devices [ 4.492029] Booting paravirtualized kernel on bare hardware [ 4.492071] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 4.492112] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 4.492152] percpu: Embedded 67 pages/cpu s237568 r8192 d28672 u1048576 [ 4.492193] pcpu-alloc: s237568 r8192 d28672 u1048576 alloc=1*2097152 [ 4.492981] pcpu-alloc: [0] 0 1 [ 4.493035] Kernel command line: initrd=\initramfs-linux-lts.img root=PARTUUID=HASH_AF4-85D9-EEF2-2963-E90806664B9F rootflags=subvol=@ rw rootfstype=btrfs libata.allow_tpm=1 pcie_aspm.policy=powersupersave [ 4.493090] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 4.493131] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 4.493171] Fallback order for Node 0: 0 [ 4.493213] Built 1 zonelists, mobility grouping on. Total pages: 2066789 [ 4.493255] Policy zone: Normal [ 4.493296] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 4.494195] software IO TLB: area num 2. [ 4.494276] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 4.494336] Kernel/User page tables isolation: enabled [ 4.494377] ftrace: allocating 51430 entries in 201 pages [ 4.494418] ftrace: allocated 201 pages with 4 groups [ 4.494458] Dynamic Preempt: voluntary [ 4.494498] rcu: Preemptible hierarchical RCU implementation. [ 4.494541] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 4.494581] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 4.494622] Trampoline variant of Tasks RCU enabled. [ 4.494664] Rude variant of Tasks RCU enabled. [ 4.495907] Tracing variant of Tasks RCU enabled. [ 4.495976] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 4.496018] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 4.496059] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 4.496103] RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 4.496144] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 4.496184] NR_IRQS: 524544, nr_irqs: 512, preallocated irqs: 16 [ 4.496224] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 4.496286] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 4.496328] Console: colour dummy device 80x25 [ 4.496368] printk: legacy console [tty0] enabled [ 4.496407] ACPI: Core revision 20240827 [ 4.496447] APIC: Switch to symmetric I/O mode setup [ 4.496488] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1f3b3266cb4, max_idle_ns: 440795224023 ns [ 4.496529] Calibrating delay loop (skipped), value calculated using timer frequency.. 4335.88 BogoMIPS (lpj=7222223) [ 4.496569] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 4.496609] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 4.496661] process: using mwait in idle threads [ 4.496729] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 4.496771] Spectre V2 : Mitigation: Retpolines [ 4.496814] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 4.496857] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 4.496899] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 4.496940] MDS: Mitigation: Clear CPU buffers [ 4.496982] MMIO Stale Data: Unknown: No mitigations [ 4.497023] x86/fpu: x87 FPU will use FXSAVE [ 4.497090] Freeing SMP alternatives memory: 40K [ 4.497132] pid_max: default: 32768 minimum: 301 [ 4.497172] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf [ 4.497212] landlock: Up and running. [ 4.497251] Yama: becoming mindful. [ 4.497290] LSM support for eBPF active [ 4.497332] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 4.497374] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 4.497416] smpboot: CPU0: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (family: 0x6, model: 0x37, stepping: 0x8) [ 4.497458] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 4.497498] ... version: 3 [ 4.497538] ... bit width: 40 [ 4.497577] ... generic registers: 2 [ 4.497617] ... value mask: 000000ffffffffff [ 4.497681] ... max period: 0000007fffffffff [ 4.497721] ... fixed-purpose events: 3 [ 4.497760] ... event mask: 0000000700000003 [ 4.497800] signal: max sigframe size: 1440 [ 4.497840] Estimated ratio of average max frequency by base frequency (times 1024): 1220 [ 4.497879] rcu: Hierarchical SRCU implementation. [ 4.497921] rcu: Max phase no-delay instances is 1000. [ 4.497961] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 4.498002] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 4.498041] smp: Bringing up secondary CPUs ... [ 4.498081] smpboot: x86: Booting SMP configuration: [ 4.498121] .... node #0, CPUs: #1 [ 4.498159] smp: Brought up 1 node, 2 CPUs [ 4.498199] smpboot: Total of 2 processors activated (8670.77 BogoMIPS) [ 4.498259] Memory: 7983148K/8267156K available (18432K kernel code, 2673K rwdata, 14344K rodata, 4284K init, 4280K bss, 277136K reserved, 0K cma-reserved) [ 4.498300] devtmpfs: initialized [ 4.498340] x86/mm: Memory block size: 128MB [ 4.498379] ACPI: PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes) [ 4.498420] ACPI: PM: Registering ACPI NVS region [mem 0x787ab000-0x788aafff] (1048576 bytes) [ 4.498458] ACPI: PM: Registering ACPI NVS region [mem 0x794c6000-0x79dc5fff] (9437184 bytes) [ 4.498497] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 4.498538] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 4.498576] pinctrl core: initialized pinctrl subsystem [ 4.498616] PM: RTC time: 02:29:49, date: 2025-06-11 [ 4.498656] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 4.498708] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 4.498750] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 4.498790] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 4.498915] thermal_sys: Registered thermal governor 'fair_share' [ 4.498955] thermal_sys: Registered thermal governor 'bang_bang' [ 4.498993] thermal_sys: Registered thermal governor 'step_wise' [ 4.499031] thermal_sys: Registered thermal governor 'user_space' [ 4.499070] thermal_sys: Registered thermal governor 'power_allocator' [ 4.499125] cpuidle: using governor ladder [ 4.499163] cpuidle: using governor menu [ 4.499202] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 4.499241] PCI: ECAM [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) for domain 0000 [bus 00-3f] PCI: not using ECAM ([mem 0xe0000000-0xe3ffffff] not reserved) [ 4.499319] PCI: Using configuration type 1 for base access [ 4.499358] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 4.499398] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 4.499440] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 4.499482] ACPI: Added _OSI(Module Device) [ 4.499524] ACPI: Added _OSI(Processor Device) [ 4.499564] ACPI: Added _OSI(3.0 _SCP Extensions) [ 4.499622] ACPI: Added _OSI(Processor Aggregator Device) [ 4.499664] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 4.499708] ACPI BIOS Error (bug): Could not resolve symbol [\_SB._OSC.CDW1], AE_NOT_FOUND (20240827/psargs-332) [ 4.499750] fbcon: Taking over console [ 4.499792] ACPI Error: Aborting method \_SB._OSC due to previous error (AE_NOT_FOUND) (20240827/psparse-529) [ 4.499833] ACPI: Dynamic OEM Table Load: [ 4.499874] ACPI: SSDT 0xFFFF8F0580A47800 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20130117) [ 4.499915] ACPI: Dynamic OEM Table Load: [ 4.499957] ACPI: SSDT 0xFFFF8F0580A42000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 4.503429] ACPI: Dynamic OEM Table Load: [ 4.503498] ACPI: SSDT 0xFFFF8F0580296A00 00015F (v01 PmRef ApIst 00003000 INTL 20130117) [ 4.503539] ACPI: Dynamic OEM Table Load: [ 4.503578] ACPI: SSDT 0xFFFF8F0580C2C180 00008D (v01 PmRef ApCst 00003000 INTL 20130117) [ 4.503619] ACPI: EC: EC started [ 4.503662] ACPI: EC: interrupt blocked [ 4.503703] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 4.503746] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 4.503787] ACPI: Interpreter enabled [ 4.503849] ACPI: PM: (supports S0 S3 S4 S5) [ 4.503890] ACPI: Using IOAPIC for interrupt routing [ 4.503930] PCI: ECAM [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) for domain 0000 [bus 00-3f] PCI: ECAM [mem 0xe0000000-0xe3ffffff] reserved as ACPI motherboard resource [ 4.504012] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.504052] PCI: Using E820 reservations for host bridge windows [ 4.504092] ACPI: Enabled 6 GPEs in block 00 to 3F [ 4.504133] ACPI: \_SB_.USBC: New power resource [ 4.504173] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 4.507571] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR) [ 4.513801] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xe0000000-0xe3ffffff] for domain 0000 [bus 00-3f] only partially covers this bridge [ 4.513876] PCI host bridge to bus 0000:00 [ 4.514476] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 conventional PCI endpoint [ 4.522966] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 conventional PCI endpoint [ 4.527104] pci 0000:00:02.0: BAR 0 [mem 0x90000000-0x903fffff] pci 0000:00:02.0: BAR 2 [mem 0x80000000-0x8fffffff pref] pci 0000:00:02.0: BAR 4 [io 0x2050-0x2057] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 conventional PCI endpoint [ 4.534094] pci 0000:00:13.0: BAR 0 [io 0x2048-0x204f] pci 0000:00:13.0: BAR 1 [io 0x205c-0x205f] pci 0000:00:13.0: BAR 2 [io 0x2040-0x2047] pci 0000:00:13.0: BAR 3 [io 0x2058-0x205b] pci 0000:00:13.0: BAR 4 [io 0x2020-0x203f] pci 0000:00:13.0: BAR 5 [mem 0x9091e000-0x9091e7ff] pci 0000:00:13.0: PME# supported from D3hot [ 4.542061] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 conventional PCI endpoint [ 4.550367] pci 0000:00:14.0: BAR 0 [mem 0x90900000-0x9090ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 4.551710] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 conventional PCI endpoint [ 4.552374] pci 0000:00:1a.0: BAR 0 [mem 0x90800000-0x908fffff] pci 0000:00:1a.0: BAR 1 [mem 0x90700000-0x907fffff] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 4.557758] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 conventional PCI endpoint [ 4.558394] pci 0000:00:1b.0: BAR 0 [mem 0x90910000-0x90913fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 4.559629] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 PCIe Root Port [ 4.563702] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 4.565041] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 PCIe Root Port [ 4.565681] pci 0000:00:1c.1: PCI bridge to [bus 02] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 4.570172] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 PCIe Root Port [ 4.570835] pci 0000:00:1c.2: PCI bridge to [bus 03] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 4.578207] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 conventional PCI endpoint [ 4.583898] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 conventional PCI endpoint [ 4.584595] pci 0000:00:1f.3: BAR 0 [mem 0x90918000-0x9091801f] pci 0000:00:1f.3: BAR 4 [io 0x2000-0x201f] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000 PCIe Endpoint [ 4.590727] pci 0000:02:00.0: BAR 0 [mem 0x90600000-0x9067ffff 64bit] pci 0000:02:00.0: ROM [mem 0xffff0000-0xffffffff pref] pci 0000:02:00.0: supports D1 D2 [ 4.592820] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.597007] pci 0000:00:1c.1: PCI bridge to [bus 02] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint [ 4.598447] pci 0000:03:00.0: BAR 0 [io 0x1000-0x10ff] pci 0000:03:00.0: BAR 2 [mem 0x90500000-0x90500fff 64bit] pci 0000:03:00.0: BAR 4 [mem 0x90400000-0x90403fff 64bit pref] pci 0000:03:00.0: supports D1 D2 [ 4.604584] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.605257] pci 0000:00:1c.2: PCI bridge to [bus 03] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 4.605360] ACPI: PCI: Interrupt link LNKA disabled [ 4.605400] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 4.605457] ACPI: PCI: Interrupt link LNKB disabled [ 4.605497] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 4.605538] ACPI: PCI: Interrupt link LNKC disabled [ 4.605578] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 4.605619] ACPI: PCI: Interrupt link LNKD disabled [ 4.605660] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 4.605701] ACPI: PCI: Interrupt link LNKE disabled [ 4.605741] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 4.605781] ACPI: PCI: Interrupt link LNKF disabled [ 4.605834] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 4.605874] ACPI: PCI: Interrupt link LNKG disabled [ 4.605915] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 4.605955] ACPI: PCI: Interrupt link LNKH disabled [ 4.606594] byt_gpio INT33FC:00: [Firmware Bug]: Pin 94: DIRECT_IRQ_EN set without trigger (CONF0: 0x2803cc00), clearing [ 4.610744] byt_gpio INT33FC:02: [Firmware Bug]: Pin 1: DIRECT_IRQ_EN set without trigger (CONF0: 0x2803cc00), clearing [ 4.611396] byt_gpio INT33FC:02: [Firmware Bug]: Pin 3: DIRECT_IRQ_EN set without trigger (CONF0: 0x2803cc00), clearing [ 4.612052] byt_gpio INT33FC:02: [Firmware Bug]: Pin 6: DIRECT_IRQ_EN set without trigger (CONF0: 0x2803cc00), clearing [ 4.612688] byt_gpio INT33FC:02: [Firmware Bug]: Pin 17: DIRECT_IRQ_EN set without trigger (CONF0: 0x2803cc01), clearing [ 4.613309] byt_gpio INT33FC:02: [Firmware Bug]: Pin 27: DIRECT_IRQ_EN set without trigger (CONF0: 0x2803cc00), clearing [ 4.616827] ACPI: EC: interrupt unblocked [ 4.616881] ACPI: EC: event unblocked [ 4.616921] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 4.616960] ACPI: EC: GPE=0x18 [ 4.617002] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 4.617061] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 4.617101] iommu: Default domain type: Translated [ 4.617141] iommu: DMA domain TLB invalidation policy: lazy mode [ 4.617181] SCSI subsystem initialized [ 4.617219] libata version 3.00 loaded. [ 4.617259] ACPI: bus type USB registered [ 4.617299] usbcore: registered new interface driver usbfs [ 4.617341] usbcore: registered new interface driver hub [ 4.617382] usbcore: registered new device driver usb [ 4.617422] EDAC MC: Ver: 3.0.0 [ 4.617477] efivars: Registered efivars operations [ 4.617517] NetLabel: Initializing [ 4.617557] NetLabel: domain hash size = 128 [ 4.617598] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 4.617638] NetLabel: unlabeled traffic allowed by default [ 4.617678] mctp: management component transport protocol core [ 4.617718] NET: Registered PF_MCTP protocol family [ 4.617758] PCI: Using ACPI for IRQ routing [ 4.617799] PCI: pci_cache_line_size set to 64 bytes [ 4.617850] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff] e820: reserve RAM buffer [mem 0x74eb4018-0x77ffffff] e820: reserve RAM buffer [mem 0x76360000-0x77ffffff] e820: reserve RAM buffer [mem 0x77dcc000-0x77ffffff] e820: reserve RAM buffer [mem 0x794c6000-0x7bffffff] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 4.619425] pci 0000:00:02.0: vgaarb: bridge control possible [ 4.623464] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 4.623536] vgaarb: loaded [ 4.623574] clocksource: Switched to clocksource tsc-early [ 4.623631] VFS: Disk quotas dquot_6.6.0 [ 4.623672] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.623712] pnp: PnP ACPI init [ 4.624370] system 00:01: [io 0x0680-0x069f] has been reserved [ 4.625024] system 00:01: [io 0x0400-0x047f] has been reserved [ 4.625655] system 00:01: [io 0x0500-0x05fe] has been reserved [ 4.626272] system 00:01: [io 0x0600-0x061f] has been reserved [ 4.630307] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 4.631015] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved [ 4.631702] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved [ 4.632410] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved [ 4.633050] system 00:03: [mem 0xfed04000-0xfed04fff] has been reserved [ 4.633747] system 00:03: [mem 0xfed0c000-0xfed0ffff] could not be reserved [ 4.634388] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved [ 4.635037] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 4.635759] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved [ 4.636407] system 00:03: [mem 0xfef00000-0xfeffffff] has been reserved [ 4.636472] pnp: PnP ACPI: found 4 devices [ 4.636513] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 4.636556] NET: Registered PF_INET protocol family [ 4.636598] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 4.636641] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 4.641170] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 4.641250] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 4.641292] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 4.641333] TCP: Hash tables configured (established 65536 bind 65536) [ 4.641375] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 4.641417] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 4.641459] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 4.641500] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 4.641542] NET: Registered PF_XDP protocol family [ 4.642217] pci 0000:02:00.0: ROM [mem 0xffff0000-0xffffffff pref]: can't claim; no compatible bridge window [ 4.642856] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 4.643725] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 4.644362] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 4.644974] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 4.645590] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 4.646217] pci 0000:00:1c.0: bridge window [mem size 0x00200000]: can't assign; no space [ 4.646888] pci 0000:00:1c.0: bridge window [mem size 0x00200000]: failed to assign [ 4.647529] pci 0000:00:1c.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 4.648144] pci 0000:00:1c.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 4.648750] pci 0000:00:1c.1: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 4.649361] pci 0000:00:1c.1: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 4.649979] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]: assigned [ 4.650631] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]: assigned [ 4.651254] pci 0000:00:1c.1: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 4.651873] pci 0000:00:1c.1: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 4.652495] pci 0000:00:1c.0: bridge window [mem size 0x00200000]: can't assign; no space [ 4.653129] pci 0000:00:1c.0: bridge window [mem size 0x00200000]: failed to assign [ 4.653826] pci 0000:00:1c.0: bridge window [mem size 0x00200000 64bit pref]: can't assign; no space [ 4.654449] pci 0000:00:1c.0: bridge window [mem size 0x00200000 64bit pref]: failed to assign [ 4.655056] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:02:00.0: ROM [mem 0x90680000-0x9068ffff pref]: assigned [ 4.659413] pci 0000:00:1c.1: PCI bridge to [bus 02] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff] pci 0000:00:1c.2: PCI bridge to [bus 03] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: resource 9 [mem 0x80000000-0x909ffffe window] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] pci_bus 0000:02: resource 1 [mem 0x90600000-0x906fffff] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff] pci_bus 0000:03: resource 2 [mem 0x90400000-0x904fffff 64bit pref] PCI: CLS 64 bytes, default 64 [ 4.675228] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.675269] software IO TLB: mapped [mem 0x000000006c000000-0x0000000070000000] (64MB) [ 4.675310] Trying to unpack rootfs image as initramfs... [ 4.675351] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f3b3266cb4, max_idle_ns: 440795224023 ns [ 4.675392] clocksource: Switched to clocksource tsc [ 4.675433] Initialise system trusted keyrings [ 4.675473] Key type blacklist registered [ 4.675522] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 4.675563] fuse: init (API version 7.41) [ 4.675604] integrity: Platform Keyring initialized [ 4.675644] integrity: Machine keyring initialized [ 4.675684] Key type asymmetric registered [ 4.675724] Asymmetric key parser 'x509' registered [ 4.675765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 4.675806] io scheduler mq-deadline registered [ 4.675846] io scheduler kyber registered [ 4.675896] io scheduler bfq registered [ 4.675938] ledtrig-cpu: registered to indicate activity on CPUs [ 4.675979] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.676021] Freeing initrd memory: 12024K [ 4.676062] ACPI: AC: AC Adapter [ACAD] (off-line) [ 4.676104] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 4.676145] ACPI: button: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 4.676226] ACPI: button: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 4.676318] ACPI: button: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 4.676398] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.677332] ACPI: thermal: Thermal Zone [TZ01] (25 C) [ 4.677373] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 4.677414] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.677468] ACPI: battery: Slot [BAT1] (battery present) [ 4.677509] hpet: number irqs doesn't agree with number of timers [ 4.677550] Non-volatile memory driver v1.3 [ 4.677591] Linux agpgart interface v0.103 [ 4.677634] ACPI: bus type drm_connector registered [ 4.678313] ahci 0000:00:13.0: version 3.0 [ 4.678955] ahci 0000:00:13.0: controller can't do DEVSLP, turning off [ 4.679588] ahci 0000:00:13.0: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 4.680339] ahci 0000:00:13.0: 1/2 ports implemented (port mask 0x1) [ 4.680996] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso [ 4.681641] scsi host0: ahci [ 4.682276] scsi host1: ahci [ 4.682324] ata1: SATA max UDMA/133 abar m2048@0x9091e000 port 0x9091e100 irq 90 lpm-pol 3 [ 4.682365] ata2: DUMMY [ 4.682986] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.683692] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 4.684313] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 4.684943] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.685569] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.686188] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 4.686646] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 4.687141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.687582] usb usb1: Product: xHCI Host Controller [ 4.688023] usb usb1: Manufacturer: Linux 6.12.30-1-lts xhci-hcd [ 4.688531] usb usb1: SerialNumber: ... [ 4.689231] hub 1-0:1.0: USB hub found [ 4.690088] hub 1-0:1.0: 6 ports detected [ 4.690598] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 4.691069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 4.691540] usb usb2: Product: xHCI Host Controller [ 4.691994] usb usb2: Manufacturer: Linux 6.12.30-1-lts xhci-hcd [ 4.692450] usb usb2: SerialNumber: ... [ 4.693091] hub 2-0:1.0: USB hub found [ 4.693796] hub 2-0:1.0: 1 port detected [ 4.693851] usbcore: registered new interface driver usbserial_generic [ 4.693893] usbserial: USB Serial support registered for generic [ 4.694501] rtc_cmos 00:00: RTC can wake from S4 [ 4.695096] rtc_cmos 00:00: registered as rtc0 [ 4.695698] rtc_cmos 00:00: setting system clock to 2025-06-11T02:29:49 UTC (1749608989) [ 4.696294] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 4.696340] intel_pstate: Intel P-state driver initializing [ 4.696999] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic [ 4.697056] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0 [ 4.697097] Console: switching to colour frame buffer device 170x48 [ 4.697716] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 4.697763] hid: raw HID events driver (C) Jiri Kosina [ 4.697817] drop_monitor: Initializing network drop monitor service [ 4.697859] NET: Registered PF_INET6 protocol family [ 4.697900] Segment Routing with IPv6 [ 4.697941] RPL Segment Routing with IPv6 [ 4.697981] In-situ OAM (IOAM) with IPv6 [ 4.698023] NET: Registered PF_PACKET protocol family [ 4.698063] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 4.698105] microcode: Current revision: 0x00000838 [ 4.698146] microcode: Updated early from: 0x00000829 [ 4.698195] IPI shorthand broadcast: enabled [ 4.698235] sched_clock: Marking stable (760007261, 1469400)->(813239154, -51762493) [ 4.698278] registered taskstats version 1 [ 4.698318] Loading compiled-in X.509 certificates [ 4.698360] Loaded X.509 cert 'Build time autogenerated kernel key: 71fc4ef893a961ced8da7ff503ffd964af003a3c' [ 4.698401] zswap: loaded using pool zstd/zsmalloc [ 4.698443] Demotion targets for Node 0: null [ 4.698484] Key type .fscrypt registered [ 4.698533] Key type fscrypt-provisioning registered [ 4.698574] PM: Magic number: 13:959:459 [ 4.698615] RAS: Correctable Errors collector initialized. [ 4.698656] clk: Disabling unused clocks [ 4.698697] PM: genpd: Disabling unused power domains [ 4.699404] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 4.699461] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.699503] ata1.00: supports DRM functions and may not be fully accessible [ 4.699555] ata1.00: ATA-11: KINGSTON SUV500120G, 003056RR, max UDMA/133 [ 4.699596] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 4.699635] ata1.00: supports DRM functions and may not be fully accessible [ 4.699675] ata1.00: configured for UDMA/133 [ 4.700374] scsi 0:0:0:0: Direct-Access ATA KINGSTON SUV5001 56RR PQ: 0 ANSI: 5 [ 4.701020] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 4.701664] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.702300] sd 0:0:0:0: [sda] Write Protect is off [ 4.702952] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.703712] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.704406] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 4.704453] sda: sda1 sda2 [ 4.705138] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.705185] Freeing unused decrypted memory: 2028K [ 4.705227] Freeing unused kernel image (initmem) memory: 4284K [ 4.705269] Write protecting the kernel read-only data: 34816k [ 4.705309] Freeing unused kernel image (rodata/data gap) memory: 2040K [ 4.705827] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37 [ 4.706347] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 4.706956] usb 1-2: Product: USB2.0 Hub [ 4.707637] hub 1-2:1.0: USB hub found [ 4.708297] hub 1-2:1.0: 4 ports detected [ 4.708344] usb: port power management may be unreliable [ 4.708386] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.708442] rodata_test: all tests were successful [ 4.708483] x86/mm: Checking user space page tables [ 4.708524] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.708564] Run /init as init process [ 4.708606] with arguments: [ 4.708647] /init [ 4.708686] with environment: [ 4.708726] HOME=/ [ 4.708767] TERM=linux [ 4.709427] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 4.709894] usb 1-4: New USB device found, idVendor=04f2, idProduct=b48a, bcdDevice=22.04 [ 4.710370] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.710801] usb 1-4: Product: HD WebCam [ 4.711232] usb 1-4: Manufacturer: SunplusIT INC. [ 4.711282] raid6: skipped pq benchmark and selected sse2x4 [ 4.711324] raid6: using ssse3x2 recovery algorithm [ 4.711364] xor: measuring software checksum speed [ 4.711416] prefetch64-sse : 9988 MB/sec [ 4.711457] generic_sse : 9235 MB/sec [ 4.711498] xor: using function: prefetch64-sse (9988 MB/sec) [ 4.712258] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd [ 4.712741] usb 1-2.1: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.01 [ 4.713214] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 4.713262] Btrfs loaded, zoned=yes, fsverity=yes [ 4.713303] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 4.713469] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 4.713557] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.713601] sdhci: Secure Digital Host Controller Interface driver [ 4.713642] sdhci: Copyright(c) Pierre Ossman [ 4.713683] mmc0: SDHCI controller on ACPI [80860F16:00] using ADMA [ 4.713725] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA [ 4.713766] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 4.713807] BTRFS: device fsid HASH_889-1309-24AB-0DBC-C6DB719F8B61 devid 1 transid 9635 /dev/sda2 (8:2) scanned by mount (188) [ 4.713861] BTRFS info (device sda2): first mount of filesystem HASH_889-1309-24AB-0DBC-C6DB719F8B61 [ 4.713902] BTRFS info (device sda2): using crc32c (crc32c-intel) checksum algorithm [ 4.713943] BTRFS info (device sda2): using free-space-tree [ 4.713985] mmc1: Failed to initialize a non-removable card [ 4.714220] zram: Added device: zram0 [ 4.718129] device-mapper: uevent: version 1.0.3 [ 4.718170] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 4.718383] loop: module loaded [ 4.718609] i2c_dev: i2c /dev entries driver [ 4.718693] Asymmetric key parser 'pkcs8' registered [ 4.719649] BTRFS info (device sda2 state M): use zstd compression, level 1 [ 5.533380] zram0: detected capacity change from 0 to 8009728 [ 5.646750] Adding 4004860k swap on /dev/zram0. Priority:100 extents:1 across:4004860k SSDsc [ 6.456129] Consider using thermal netlink events interface [ 6.456250] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels [ 6.457067] wmi_bus wmi_bus-PNP0C14:00: [Firmware Bug]: WMBF method block execution control method not found [ 7.026727] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 7.046825] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 7.050567] i2c i2c-1: Successfully instantiated SPD at 0x50 [ 7.060043] mc: Linux media interface: v0.10 [ 7.478690] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.482794] videodev: Linux video capture interface: v2.00 [ 7.488212] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.488378] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 7.860068] cryptd: max_cpu_qlen set to 1000 [ 7.887005] Bluetooth: Core ver 2.22 [ 7.887216] NET: Registered PF_BLUETOOTH protocol family [ 7.887415] Bluetooth: HCI device and connection manager initialized [ 7.887506] Bluetooth: HCI socket layer initialized [ 7.887601] Bluetooth: L2CAP socket layer initialized [ 7.887697] Bluetooth: SCO socket layer initialized [ 7.920302] intel_rapl_common: Found RAPL domain package [ 7.920499] intel_rapl_common: Found RAPL domain core [ 7.940392] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 7.970127] input: SYN1B7D:01 06CB:74D9 Mouse as /devices/platform/80860F41:00/i2c-0/i2c-SYN1B7D:01/0018:06CB:74D9.0001/input/input6 [ 8.013411] input: SYN1B7D:01 06CB:74D9 Touchpad as /devices/platform/80860F41:00/i2c-0/i2c-SYN1B7D:01/0018:06CB:74D9.0001/input/input7 [ 8.020584] r8169 0000:03:00.0 eth0: RTL8168g/8111g, 01ADA6955D0259C2D082C2A7001D4CED, XID 4c0, IRQ 94 [ 8.021565] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] hid-generic 0018:06CB:74D9.0001: input,hidraw0: I2C HID v1.00 Mouse [SYN1B7D:01 06CB:74D9] on i2c-SYN1B7D:01 [ 8.490684] acer_wmi: Acer Laptop ACPI-WMI Extras [ 8.490893] acer_wmi: Function bitmap for Communication Button: 0x801 [ 8.493379] iTCO_vendor_support: vendor-support=0 [ 8.496730] input: Acer WMI hotkeys as /devices/virtual/input/input9 [ 8.616713] input: SYN1B7D:01 06CB:74D9 Mouse as /devices/platform/80860F41:00/i2c-0/i2c-SYN1B7D:01/0018:06CB:74D9.0001/input/input10 [ 8.626722] input: SYN1B7D:01 06CB:74D9 Touchpad as /devices/platform/80860F41:00/i2c-0/i2c-SYN1B7D:01/0018:06CB:74D9.0001/input/input11 [ 8.626914] hid-multitouch 0018:06CB:74D9.0001: input,hidraw0: I2C HID v1.00 Mouse [SYN1B7D:01 06CB:74D9] on i2c-SYN1B7D:01 [ 8.656044] at24 1-0050: supply vcc not found, using dummy regulator [ 8.663953] at24 1-0050: 256 byte spd EEPROM, read-only [ 8.763379] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 8.910058] iTCO_wdt iTCO_wdt.1.auto: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) [ 8.917199] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 8.944021] mousedev: PS/2 mouse device common for all mice [ 9.093372] usb 1-4: Found UVC 1.00 device HD WebCam (04f2:b48a) [ 9.104489] usbcore: registered new interface driver btusb [ 9.150053] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 9.163392] usbcore: registered new interface driver uvcvideo [ 9.277625] Creating 1 MTD partitions on "intel-spi": [ 9.277830] 0x000000000000-0x000000800000 : "BIOS" [ 9.450062] usbcore: registered new interface driver ath3k [ 9.473606] usb 1-2.1: USB disconnect, device number 4 [ 9.663526] usb 1-2.1: new full-speed USB device number 5 using xhci_hcd [ 9.743524] usb 1-2.1: New USB device found, idVendor=0cf3, idProduct=0036, bcdDevice= 0.02 [ 9.744482] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 10.330141] r8169 0000:03:00.0 enp3s0: Link is Down [ 10.459597] ath: phy0: WB335 1-ANT card detected [ 10.459746] ath: phy0: Set BT/WLAN RX diversity capability [ 10.483593] ath: phy0: Enable LNA combining [ 10.498609] i915 0000:00:02.0: [drm] Found VALLEYVIEW (device ID 0f31) display version 7.00 stepping N/A [ 10.560064] ath: phy0: ASPM enabled: 0x42 [ 10.560228] ath: EEPROM regdomain: 0x60 [ 10.560297] ath: EEPROM indicates we should expect a direct regpair map [ 10.560401] ath: Country alpha2 being used: 00 [ 10.560485] ath: Regpair used: 0x60 [ 10.560534] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 10.587471] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0x0000000078217459, irq=17 [ 10.656739] Console: switching to colour dummy device 80x25 [ 10.676724] i915 0000:00:02.0: vgaarb: deactivate vga console [ 10.883140] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1 [ 10.883317] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.883440] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13 [ 11.050085] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.050248] Bluetooth: BNEP filters: protocol multicast [ 11.050301] Bluetooth: BNEP socket layer initialized [ 11.053394] Bluetooth: MGMT ver 1.23 [ 11.076742] NET: Registered PF_ALG protocol family [ 11.154036] fbcon: i915drmfb (fb0) is primary device [ 12.590186] Console: switching to colour frame buffer device 170x48 [ 12.616979] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 12.773686] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 12.886701] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 12.887673] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.888457] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 12.889239] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 12.889953] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 12.890752] snd_hda_codec_realtek hdaudioC0D0: Mic=0x12 [ 12.991455] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 12.991643] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 17.620047] Bluetooth: RFCOMM TTY layer initialized [ 17.620222] Bluetooth: RFCOMM socket layer initialized [ 17.620314] Bluetooth: RFCOMM ver 1.11 [ 18.136728] overlayfs: "xino" feature enabled using 2 upper inode bits. [ 18.365857] overlayfs: "xino" feature enabled using 2 upper inode bits. [ 31.820110] wlan0: authenticate with 5A55945836847E285EA7E7156D20D252 (local address=04F72C04C4E815EA8E3CE68517132172) [ 31.820401] wlan0: send auth to 5A55945836847E285EA7E7156D20D252 (try 1/3) [ 31.824833] wlan0: authenticated [ 31.843638] wlan0: associate with 5A55945836847E285EA7E7156D20D252 (try 1/3) [ 31.846758] wlan0: RX AssocResp from 5A55945836847E285EA7E7156D20D252 (capab=0x431 status=0 aid=1) [ 31.847050] wlan0: associated [ 31.847174] ath: EEPROM regdomain: 0x8044 [ 31.848799] ath: EEPROM indicates we should expect a country code [ 31.848918] ath: doing EEPROM country->regdmn map search [ 31.849018] ath: country maps to regdmn code: 0x55 [ 31.849115] ath: Country alpha2 being used: BO [ 31.849213] ath: Regpair used: 0x55 [ 31.849295] ath: regdomain 0x8044 dynamically updated by country element [ 34.146739] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 536.113347] r8169 0000:03:00.0 enp3s0: Link is Down [ 1042.116698] wlan0: deauthenticating from 5A55945836847E285EA7E7156D20D252 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1042.376870] r8169 0000:03:00.0 enp3s0: Link is Down


Hardware for Linux and BSD

GitHub