[ 0.588537] i2c_dev: i2c /dev entries driver [ 0.597537] SCSI subsystem initialized [ 0.603378] device-mapper: uevent: version 1.0.3 [ 0.603439] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.726420] xor: automatically using best checksumming function avx [ 0.744808] raid6: avx2x4 gen() 32576 MB/s [ 0.761806] raid6: avx2x2 gen() 31691 MB/s [ 0.778792] raid6: avx2x1 gen() 31267 MB/s [ 0.778803] raid6: using algorithm avx2x4 gen() 32576 MB/s [ 0.795791] raid6: .... xor() 13105 MB/s, rmw enabled [ 0.795791] raid6: using avx2x2 recovery algorithm [ 0.860803] random: crng init done [ 0.874556] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=no [ 0.890150] ACPI: bus type USB registered [ 0.890177] usbcore: registered new interface driver usbfs [ 0.890186] usbcore: registered new interface driver hub [ 0.890196] usbcore: registered new device driver usb [ 1.216802] tsc: Refined TSC clocksource calibration: 2793.515 MHz [ 1.216810] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2844524c128, max_idle_ns: 440795206583 ns [ 1.216828] clocksource: Switched to clocksource tsc [ 1.263755] Linux agpgart interface v0.103 [ 1.269371] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.269385] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.269405] ehci-pci 0000:00:1a.0: debug port 2 [ 1.270439] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 1.273821] ACPI: button: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 1.273945] ACPI: button: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 [ 1.274024] ACPI: button: Sleep Button [SBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 1.274124] ACPI: button: Power Button [PWRF] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3c000 [ 1.282088] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.282150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.282154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.282156] usb usb1: Product: EHCI Host Controller [ 1.282158] usb usb1: Manufacturer: Linux 6.1.1-desktop-1omv2290 ehci_hcd [ 1.282160] usb usb1: SerialNumber: ... [ 1.282297] hub 1-0:1.0: USB hub found [ 1.282306] hub 1-0:1.0: 2 ports detected [ 1.284602] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.284609] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.284625] ehci-pci 0000:00:1d.0: debug port 2 [ 1.288557] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7d3b000 [ 1.294804] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.294844] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.294847] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.294849] usb usb2: Product: EHCI Host Controller [ 1.294851] usb usb2: Manufacturer: Linux 6.1.1-desktop-1omv2290 ehci_hcd [ 1.294853] usb usb2: SerialNumber: ... [ 1.294856] ACPI: battery: Slot [BAT0] (battery present) [ 1.295235] hub 2-0:1.0: USB hub found [ 1.295243] hub 2-0:1.0: 2 ports detected [ 1.297155] ACPI: battery: Slot [BAT1] (battery absent) [ 1.309283] ACPI: bus type drm_connector registered [ 1.311247] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.311254] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.312337] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.312580] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.312584] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.312587] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.312796] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 1.315580] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.315584] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.315586] usb usb3: Product: xHCI Host Controller [ 1.315588] usb usb3: Manufacturer: Linux 6.1.1-desktop-1omv2290 xhci-hcd [ 1.315590] usb usb3: SerialNumber: ... [ 1.317124] hub 3-0:1.0: USB hub found [ 1.317154] hub 3-0:1.0: 15 ports detected [ 1.324072] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.324077] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.324079] usb usb4: Product: xHCI Host Controller [ 1.324081] usb usb4: Manufacturer: Linux 6.1.1-desktop-1omv2290 xhci-hcd [ 1.324083] usb usb4: SerialNumber: ... [ 1.331245] hub 4-0:1.0: USB hub found [ 1.331272] hub 4-0:1.0: 6 ports detected [ 1.349814] cryptd: max_cpu_qlen set to 1000 [ 1.380870] AVX2 version of gcm_enc/dec engaged. [ 1.380923] AES CTR mode by8 optimization enabled [ 1.386151] sdhci: Secure Digital Host Controller Interface driver [ 1.386154] sdhci: Copyright(c) Pierre Ossman [ 1.391867] libata version 3.00 loaded. [ 1.399618] sdhci-pci 0000:0e:00.0: SDHCI controller found [1217:8520] (rev 1) [ 1.400413] mmc0: SDHCI controller on PCI [0000:0e:00.0] using ADMA [ 1.408845] ahci 0000:00:1f.2: version 3.0 [ 1.409971] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.409996] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x7 impl RAID mode [ 1.410001] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst [ 1.427804] scsi host0: ahci [ 1.429619] scsi host1: ahci [ 1.429752] scsi host2: ahci [ 1.430991] scsi host3: ahci [ 1.431972] scsi host4: ahci [ 1.432032] ata1: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a100 irq 36 [ 1.432036] ata2: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a180 irq 36 [ 1.432039] ata3: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a200 irq 36 [ 1.432041] ata4: DUMMY [ 1.432042] ata5: DUMMY [ 1.522799] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.528418] [drm] radeon kernel modesetting enabled. [ 1.528437] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 1.528516] ATPX version 1, functions 0x00000033 [ 1.528575] ATPX Hybrid Graphics [ 1.528620] radeon 0000:01:00.0: SI support disabled by module param [ 1.530797] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.562795] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 1.651130] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 1.651132] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.651288] hub 1-1:1.0: USB hub found [ 1.651378] hub 1-1:1.0: 6 ports detected [ 1.659134] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 1.659138] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.659297] hub 2-1:1.0: USB hub found [ 1.659382] hub 2-1:1.0: 8 ports detected [ 1.691258] usb 3-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.63 [ 1.691262] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.691264] usb 3-2: Product: USB2.1 Hub [ 1.691266] usb 3-2: Manufacturer: GenesysLogic [ 1.692065] hub 3-2:1.0: USB hub found [ 1.692386] hub 3-2:1.0: 4 ports detected [ 1.741990] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.743917] ata1.00: ATA-8: LITEONIT LCS-256L9S-11 2.5 7mm 256GB, HC8110B, max UDMA/133 [ 1.743943] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.744064] ata1.00: Features: Dev-Sleep [ 1.744402] ata1.00: configured for UDMA/133 [ 1.744478] scsi 0:0:0:0: Direct-Access ATA LITEONIT LCS-256 10B PQ: 0 ANSI: 5 [ 1.758140] mmc0: new high speed SDXC card at address 21ed [ 1.787685] mmcblk0: mmc0:21ed APPSD 250 GiB [ 1.788454] mmcblk0: p1 p2 [ 1.793502] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.794512] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 1.803906] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd [ 1.822962] usb 4-2: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.63 [ 1.822966] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.822969] usb 4-2: Product: USB3.1 Hub [ 1.822970] usb 4-2: Manufacturer: GenesysLogic [ 1.825361] hub 4-2:1.0: USB hub found [ 1.826159] hub 4-2:1.0: 4 ports detected [ 1.845987] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 1.846515] ACPI: video: [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS [ 1.847039] ACPI: video: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 1.847079] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4f/LNXVIDEO:00/input/input6 [ 1.848247] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.850006] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 1.879074] fbcon: i915drmfb (fb0) is primary device [ 1.879076] fbcon: Deferring console take-over [ 1.879078] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 1.920797] usb 1-1.5: new high-speed USB device number 3 using ehci-pci [ 1.936793] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.016885] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 [ 2.016889] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.053980] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.057311] ata2.00: ATAPI: TSSTcorp DVD+/-RW SU-208GB, D100, max UDMA/100 [ 2.059900] ata2.00: configured for UDMA/100 [ 2.063711] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW SU-208GB D100 PQ: 0 ANSI: 5 [ 2.073882] usb 1-1.5: New USB device found, idVendor=0c45, idProduct=64d0, bcdDevice=42.14 [ 2.073885] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=... [ 2.073886] usb 1-1.5: Product: Laptop_Integrated_Webcam_HD [ 2.073887] usb 1-1.5: Manufacturer: CN0767N9724874BKB571A01 [ 2.080794] usb 2-1.8: new full-speed USB device number 4 using ehci-pci [ 2.183140] usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800, bcdDevice= 1.01 [ 2.183144] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.183146] usb 2-1.8: Product: 5880 [ 2.183148] usb 2-1.8: Manufacturer: Broadcom Corp [ 2.183150] usb 2-1.8: SerialNumber: ... [ 2.183234] usb 2-1.8: config 0 descriptor?? [ 2.390035] ata3: SATA link down (SStatus 0 SControl 300) [ 2.397727] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 2.409717] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.409729] sd 0:0:0:0: [sda] Write Protect is off [ 2.409732] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.409744] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.409761] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.416702] sda: sda1 sda2 sda3 [ 2.416840] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.421586] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.421591] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.440355] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.648798] usb 3-2.1: new full-speed USB device number 4 using xhci_hcd [ 2.776199] usb 3-2.1: New USB device found, idVendor=0951, idProduct=170d, bcdDevice=31.02 [ 2.776205] usb 3-2.1: New USB device strings: Mfr=2, Product=3, SerialNumber=... [ 2.776207] usb 3-2.1: Product: HyperX Cloud Stinger Core Wireless + 7.1 [ 2.776209] usb 3-2.1: Manufacturer: Kingston [ 2.776211] usb 3-2.1: SerialNumber: ... [ 2.866844] usb 4-5: new SuperSpeed USB device number 3 using xhci_hcd [ 2.879586] usb 4-5: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00 [ 2.879590] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.879593] usb 4-5: Product: Ultra Fit [ 2.879594] usb 4-5: Manufacturer: SanDisk [ 2.879596] usb 4-5: SerialNumber: ... [ 2.966798] usb 3-2.2: new low-speed USB device number 5 using xhci_hcd [ 3.070996] usb 3-2.2: New USB device found, idVendor=046d, idProduct=c018, bcdDevice=43.00 [ 3.071000] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.071002] usb 3-2.2: Product: Logitech USB Optical Mouse [ 3.071004] usb 3-2.2: Manufacturer: Logitech [ 3.161800] usb 3-2.4: new high-speed USB device number 6 using xhci_hcd [ 3.262956] usb 3-2.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.37 [ 3.262960] usb 3-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 3.262962] usb 3-2.4: Product: USB2.0 Hub [ 3.263808] hub 3-2.4:1.0: USB hub found [ 3.264091] hub 3-2.4:1.0: 4 ports detected [ 4.357753] hid: raw HID events driver (C) Jiri Kosina [ 4.357782] usb-storage 4-5:1.0: USB Mass Storage device detected [ 4.359283] scsi host5: usb-storage 4-5:1.0 [ 4.359379] usbcore: registered new interface driver usb-storage [ 4.362562] usbcore: registered new interface driver uas [ 4.372774] [drm] amdgpu kernel modesetting enabled. [ 4.372802] amdgpu: vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 4.372885] ATPX version 1, functions 0x00000033 [ 4.372942] ATPX Hybrid Graphics [ 4.373062] amdgpu: CRAT table not found [ 4.373065] amdgpu: Virtual CRAT table created for CPU [ 4.373079] amdgpu: Topology: Add CPU node [ 4.373176] amdgpu 0000:01:00.0: enabling device (0000 -> 0003) [ 4.373235] [drm] initializing kernel modesetting (OLAND 0x1002:0x6606 0x1028:0x0684 0x00). [ 4.373247] [drm] register mmio base: 0xF7C00000 [ 4.373248] [drm] register mmio size: 262144 [ 4.373291] [drm] add ip block number 0 <si_common> [ 4.373293] [drm] add ip block number 1 <gmc_v6_0> [ 4.373295] [drm] add ip block number 2 <si_ih> [ 4.373296] [drm] add ip block number 3 <gfx_v6_0> [ 4.373297] [drm] add ip block number 4 <si_dma> [ 4.373299] [drm] add ip block number 5 <si_dpm> [ 4.373300] [drm] add ip block number 6 <dce_v6_0> [ 4.373301] [drm] add ip block number 7 <uvd_v3_1> [ 4.373304] kfd kfd: amdgpu: OLAND not supported in kfd [ 4.378086] usbcore: registered new interface driver usbhid [ 4.378089] usbhid: USB HID core driver [ 4.380869] hid-generic 0003:0951:170D.0001: hiddev0,hidraw0: USB HID v1.11 Device [Kingston HyperX Cloud Stinger Core Wireless + 7.1] on usb-0000:00:14.0-2.1/input0 [ 4.380978] input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.0/0003:046D:C018.0002/input/input8 [ 4.381052] hid-generic 0003:046D:C018.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:14.0-2.2/input0 [ 4.421464] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ATRM [ 4.421468] amdgpu: ATOM BIOS: BR45587.001 [ 4.421479] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 4.421488] [drm] GPU posting now... [ 4.425387] [drm] PCIE gen 3 link speeds already enabled [ 4.425586] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 4.429528] amdgpu 0000:01:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used) [ 4.429532] amdgpu 0000:01:00.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF [ 4.429542] [drm] Detected VRAM RAM=2048M, BAR=256M [ 4.429543] [drm] RAM width 128bits GDDR5 [ 4.429815] [drm] amdgpu: 2048M of VRAM memory ready [ 4.429818] [drm] amdgpu: 7955M of GTT memory ready. [ 4.429832] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 4.430311] amdgpu 0000:01:00.0: amdgpu: PCIE GART of 1024M enabled (table at 0x000000F400000000). [ 4.447071] [drm] Internal thermal controller without fan control [ 4.447082] [drm] amdgpu: dpm initialized [ 4.447103] [drm] AMDGPU Display Connectors [ 4.447104] [drm] Connector 0: [ 4.447105] [drm] VGA-2 [ 4.447106] [drm] DDC: 0x1970 0x1970 0x1971 0x1971 0x1972 0x1972 0x1973 0x1973 [ 4.447108] [drm] Encoders: [ 4.447109] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.462381] [drm] Found UVD firmware Version: 64.0 Family ID: 13 [ 4.989158] [drm] UVD initialized successfully. [ 4.989297] amdgpu 0000:01:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 6, active_cu_number 6 [ 5.334632] amdgpu 0000:01:00.0: amdgpu: Using BOCO for runtime pm [ 5.335154] [drm] Initialized amdgpu 3.49.0 20150101 for 0000:01:00.0 on minor 1 [ 5.375126] amdgpu 0000:01:00.0: [drm] Cannot find any crtc or sizes [ 5.377684] scsi 5:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 [ 5.378155] sd 5:0:0:0: [sdb] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB) [ 5.379583] sd 5:0:0:0: [sdb] Write Protect is off [ 5.379587] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 5.380283] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.398739] sdb: sdb1 [ 5.398838] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 8.558690] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Quota mode: none. [ 11.118316] zram0: detected capacity change from 0 to 16292864 [ 11.389272] EDAC MC: Ver: 3.0.0 [ 11.413458] EDAC ie31200: No ECC support [ 11.413480] EDAC ie31200: No ECC support [ 11.496188] e1000e: Intel(R) PRO/1000 Network Driver [ 11.496190] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 11.496344] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 11.566252] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 11.627547] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) E0B76185C751BF7E16C95E446563A637 [ 11.627557] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 11.627602] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 11.642575] ACPI: AC: AC Adapter [AC] (on-line) [ 11.713415] Adding 8146428k swap on /dev/zram0. Priority:100 extents:1 across:8146428k SSDscFS [ 11.763027] thermal LNXTHERM:00: registered as thermal_zone0 [ 11.763032] ACPI: thermal: Thermal Zone [THM] (25 C) [ 11.822030] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000183F (\_SB.PCI0.EHC2.E1PM) (20220331/utaddress-204) [ 11.822037] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000183F (\_SB.PCI0.EHC1.E1PM) (20220331/utaddress-204) [ 11.822039] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20220331/utaddress-204) [ 11.822041] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 11.822050] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20220331/utaddress-204) [ 11.822052] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 11.822054] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 11.822054] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20220331/utaddress-204) [ 11.822056] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204) [ 11.822058] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 11.822060] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 11.822061] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20220331/utaddress-204) [ 11.822063] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204) [ 11.822064] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ 11.822066] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 11.822067] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 11.849914] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 11.906685] parport_pc 00:07: [io 0x0378-0x037b] parport_pc 00:07: activated [ 11.907941] parport_pc 00:07: reported by Plug and Play ACPI [ 11.924532] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 11.949136] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 11.949168] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ 11.949200] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 11.959642] dell-smbios HASH_2B2-1725-4075-AC4B-A13908E24342: WMI SMBIOS userspace interface not supported(0), try upgrading to a newer BIOS [ 11.972910] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 11.972939] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 11.978402] i801_smbus 0000:00:1f.3: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration [ 11.978405] i2c i2c-17: 2/2 memory slots populated (from DMI) [ 11.978707] i2c i2c-17: Successfully instantiated SPD at 0x50 [ 11.993702] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/HASH_F6F-461E-5551-B932-4B79FFAD3E75/input/input13 [ 12.031154] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line [ 12.031158] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 12.031160] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 12.031161] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 12.031162] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 12.031163] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 12.031165] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a [ 12.031166] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 12.067972] mc: Linux media interface: v0.10 [ 12.070243] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.074492] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.088807] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 12.088811] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 12.088812] RAPL PMU: hw unit of domain package 2^-14 Joules [ 12.088813] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 12.088814] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 12.093520] Bluetooth: Core ver 2.22 [ 12.093541] NET: Registered PF_BLUETOOTH protocol family [ 12.093541] Bluetooth: HCI device and connection manager initialized [ 12.093544] Bluetooth: HCI socket layer initialized [ 12.093546] Bluetooth: L2CAP socket layer initialized [ 12.093549] Bluetooth: SCO socket layer initialized [ 12.102088] videodev: Linux video capture interface: v2.00 [ 12.122922] iTCO_vendor_support: vendor-support=0 [ 12.142021] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 12.147007] Intel(R) Wireless WiFi driver for Linux [ 12.149073] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 12.149118] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 12.207110] ppdev: user-space parallel port driver [ 12.226987] ERROR: Unable to locate IOAPIC for GSI 37 [ 12.227236] ERROR: Unable to locate IOAPIC for GSI 38 [ 12.241986] usb 1-1.5: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64d0) [ 12.250773] iwlwifi 0000:03:00.0: loaded firmware version 17.3216344376.0 7260-17.ucode op_mode iwlmvm [ 12.255464] usbcore: registered new interface driver btusb [ 12.274203] Bluetooth: hci0: Legacy ROM 2.5 revision 8.0 build 2 week 3 2013 [ 12.283412] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 12.283465] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 12.283522] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 12.283574] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 12.283611] dell_laptop: Using i8042 filter function for receiving events [ 12.300419] input: Laptop_Integrated_Webcam_HD: In as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input18 [ 12.300491] usbcore: registered new interface driver uvcvideo [ 12.330161] at24 17-0050: supply vcc not found, using dummy regulator [ 12.330729] at24 17-0050: 256 byte spd EEPROM, read-only [ 12.333583] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-XXX.XXX.XXX.XXX.d.bseq [ 12.799954] spi-nor: probe of spi0.0 failed with error -22 [ 12.940273] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 12.957832] iwlwifi 0000:03:00.0: base HW address: 2935FFF3E014EDBDC9BA3714A0A5B1D5, OTP minor version: 0x0 [ 12.964979] intel_rapl_common: Found RAPL domain package [ 12.964981] intel_rapl_common: Found RAPL domain core [ 12.964982] intel_rapl_common: Found RAPL domain uncore [ 12.964983] intel_rapl_common: Found RAPL domain dram [ 12.964986] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ 12.964990] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ 12.999257] Bluetooth: hci0: Intel BT fw patch 0x57 completed & activated [ 13.169975] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 13.202190] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 13.342709] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input19 [ 13.355916] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input9 [ 14.106072] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.106077] Bluetooth: BNEP filters: protocol multicast [ 14.106081] Bluetooth: BNEP socket layer initialized [ 14.110502] Bluetooth: MGMT ver 1.22 [ 14.984129] amdgpu 0000:01:00.0: [drm] Cannot find any crtc or sizes [ 15.023129] amdgpu 0000:01:00.0: [drm] Cannot find any crtc or sizes [ 16.741664] NET: Registered PF_PACKET protocol family [ 19.594231] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 19.594273] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 27.188764] Bluetooth: RFCOMM TTY layer initialized [ 27.188770] Bluetooth: RFCOMM socket layer initialized [ 27.188772] Bluetooth: RFCOMM ver 1.11 [ 31.774999] usb 4-2: USB disconnect, device number 2 [ 430.337012] Non-volatile memory driver v1.3 [ 430.495569] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 430.713239] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 430.713271] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 430.713296] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 436.741335] amdgpu 0000:01:00.0: amdgpu: Disabling VM faults because of PRT request! [ 6109.905976] zram0: detected capacity change from 16292864 to 0