[ 0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-12 [ 0.000000] Linux version 5.19.0-31-generic (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.2.0-3ubuntu1) 12.2.0, GNU ld (GNU Binutils for Ubuntu) 2.39) #32-Ubuntu SMP PREEMPT_DYNAMIC Fri Jan 20 15:20:08 UTC 2023 (Ubuntu 5.19.0-31.32-generic 5.19.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-31-generic root=UUID=HASH_19D-F52F-C90F-403F-AB5459319DB1 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] signal: max sigframe size: 2032 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000055aa8fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000055aa9000-0x0000000055aa9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000055aaa000-0x0000000055aaafff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000055aab000-0x000000007dd0dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007dd0e000-0x000000007f10dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f10e000-0x000000007f7fdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f7fe000-0x000000007fffdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007fffe000-0x000000007fffefff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffff000-0x000000008cffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000271ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x55335018-0x55345057] usable ==> usable [ 0.000000] e820: update [mem 0x55335018-0x55345057] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000055335017] usable [ 0.000000] reserve setup_data: [mem 0x0000000055335018-0x0000000055345057] usable [ 0.000000] reserve setup_data: [mem 0x0000000055345058-0x0000000055aa8fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000055aa9000-0x0000000055aa9fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000055aaa000-0x0000000055aaafff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000055aab000-0x000000007dd0dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000007dd0e000-0x000000007f10dfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000007f10e000-0x000000007f7fdfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000007f7fe000-0x000000007fffdfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000007fffe000-0x000000007fffefff] usable [ 0.000000] reserve setup_data: [mem 0x000000007ffff000-0x000000008cffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x0000000271ffffff] usable [ 0.000000] efi: EFI v2.50 by INSYDE Corp. [ 0.000000] efi: TPMFinalLog=0x7f105000 ACPI 2.0=0x7fffd014 SMBIOS=0x7e608000 SMBIOS 3.0=0x7e606000 ESRT=0x7e6041d8 MOKvar=0x63b95000 RNG=0x7ff99018 TPMEventLog=0x55346018 [ 0.000000] efi: seeding entropy pool [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: HP HP Pavilion x360 Convertible 14m-cd0xxx/8486, BIOS F.20 08/01/2018 [ 0.000000] tsc: Detected 2200.000 MHz processor [ 0.000000] tsc: Detected 2199.996 MHz TSC [ 0.001111] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001115] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001130] last_pfn = 0x272000 max_arch_pfn = 0x400000000 [ 0.001437] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002567] last_pfn = 0x7ffff max_arch_pfn = 0x400000000 [ 0.020560] esrt: Reserving ESRT space from 0x000000007e6041d8 to 0x000000007e604210. [ 0.020568] e820: update [mem 0x63b95000-0x63b95fff] usable ==> reserved [ 0.020595] Using GB pages for direct mapping [ 0.021355] secureboot: Secure boot enabled [ 0.021356] RAMDISK: [mem 0x2cd55000-0x33c1cfff] ACPI: Early table checksum verification disabled [ 0.021369] ACPI: RSDP 0x000000007FFFD014 000024 (v02 HPQOEM) [ 0.021374] ACPI: XSDT 0x000000007FFDE188 000134 (v01 HPQOEM SLIC-MPC 00000000 HP 01000013) [ 0.021382] ACPI: FACP 0x000000007FFE2000 00010C (v05 HPQOEM SLIC-MPC 00000000 HP 00040000) [ 0.021389] ACPI: DSDT 0x000000007FFAD000 030A74 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000) [ 0.021394] ACPI: FACS 0x000000007F7D4000 000040 [ 0.021398] ACPI: UEFI 0x000000007FFFC000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.021402] ACPI: UEFI 0x000000007FFFB000 000042 (v01 HPQOEM INSYDE 00000002 HP 00040000) [ 0.021407] ACPI: IHIS 0x000000007FFFA000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.021411] ACPI: SSDT 0x000000007FFF5000 004959 (v01 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.021416] ACPI: MSDM 0x000000007FFF4000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.021420] ACPI: SSDT 0x000000007FFF3000 0004C3 (v02 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.021425] ACPI: SSDT 0x000000007FFF2000 000046 (v02 HPQOEM INSYDE 00003000 ACPI 00040000) [ 0.021429] ACPI: TPM2 0x000000007FFF1000 000034 (v03 HPQOEM INSYDE 00000000 HP 00040000) [ 0.021433] ACPI: SSDT 0x000000007FFEE000 002FBC (v02 HPQOEM INSYDE 00003000 ACPI 00040000) [ 0.021438] ACPI: SSDT 0x000000007FFE9000 004DF3 (v02 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.021442] ACPI: SSDT 0x000000007FFE8000 000064 (v02 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.021447] ACPI: SSDT 0x000000007FFE7000 000867 (v02 HPQOEM INSYDE 00000000 ACPI 00040000) [ 0.021451] ACPI: ASF! 0x000000007FFE6000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000) [ 0.021455] ACPI: ASPT 0x000000007FFE5000 000034 (v07 HPQOEM INSYDE 00000001 HP 00040000) [ 0.021460] ACPI: BOOT 0x000000007FFE4000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.021464] ACPI: DBGP 0x000000007FFE3000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.021468] ACPI: HPET 0x000000007FFE1000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.021473] ACPI: APIC 0x000000007FFE0000 00012C (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.021477] ACPI: MCFG 0x000000007FFDF000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.021481] ACPI: SSDT 0x000000007FFAC000 000517 (v02 HPQOEM INSYDE 00000000 ACPI 00040000) [ 0.021486] ACPI: LPIT 0x000000007FFAB000 000094 (v01 HPQOEM INSYDE 00000000 HP 00040000) [ 0.021490] ACPI: WSMT 0x000000007FFAA000 000028 (v01 HPQOEM INSYDE 00000000 HP 00040000) [ 0.021494] ACPI: SSDT 0x000000007FFA9000 00029F (v02 HPQOEM INSYDE 00000000 ACPI 00040000) [ 0.021499] ACPI: SSDT 0x000000007FFA8000 000346 (v01 HPQOEM INSYDE 00000000 ACPI 00040000) [ 0.021503] ACPI: SSDT 0x000000007FFA4000 003002 (v02 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.021508] ACPI: SSDT 0x000000007FFA3000 00051E (v02 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.021512] ACPI: DBGP 0x000000007FFA2000 000034 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) [ 0.021516] ACPI: DBG2 0x000000007FFA1000 000054 (v00 HPQOEM INSYDE 00000002 HP 00040000) [ 0.021521] ACPI: SSDT 0x000000007FF9F000 0012E6 (v02 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.021525] ACPI: SSDT 0x000000007FF9D000 0017AE (v02 HPQOEM INSYDE 00003000 ACPI 00040000) [ 0.021529] ACPI: DMAR 0x000000007FF9C000 000138 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.021534] ACPI: FPDT 0x000000007FF9B000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) [ 0.021538] ACPI: BGRT 0x000000007FF9A000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.021542] ACPI: Reserving FACP table memory at [mem 0x7ffe2000-0x7ffe210b] ACPI: Reserving DSDT table memory at [mem 0x7ffad000-0x7ffdda73] ACPI: Reserving FACS table memory at [mem 0x7f7d4000-0x7f7d403f] ACPI: Reserving UEFI table memory at [mem 0x7fffc000-0x7fffc235] ACPI: Reserving UEFI table memory at [mem 0x7fffb000-0x7fffb041] ACPI: Reserving IHIS table memory at [mem 0x7fffa000-0x7fffa037] ACPI: Reserving SSDT table memory at [mem 0x7fff5000-0x7fff9958] ACPI: Reserving MSDM table memory at [mem 0x7fff4000-0x7fff4054] ACPI: Reserving SSDT table memory at [mem 0x7fff3000-0x7fff34c2] ACPI: Reserving SSDT table memory at [mem 0x7fff2000-0x7fff2045] ACPI: Reserving TPM2 table memory at [mem 0x7fff1000-0x7fff1033] ACPI: Reserving SSDT table memory at [mem 0x7ffee000-0x7fff0fbb] ACPI: Reserving SSDT table memory at [mem 0x7ffe9000-0x7ffeddf2] ACPI: Reserving SSDT table memory at [mem 0x7ffe8000-0x7ffe8063] ACPI: Reserving SSDT table memory at [mem 0x7ffe7000-0x7ffe7866] ACPI: Reserving ASF! table memory at [mem 0x7ffe6000-0x7ffe60a4] ACPI: Reserving ASPT table memory at [mem 0x7ffe5000-0x7ffe5033] ACPI: Reserving BOOT table memory at [mem 0x7ffe4000-0x7ffe4027] ACPI: Reserving DBGP table memory at [mem 0x7ffe3000-0x7ffe3033] ACPI: Reserving HPET table memory at [mem 0x7ffe1000-0x7ffe1037] ACPI: Reserving APIC table memory at [mem 0x7ffe0000-0x7ffe012b] ACPI: Reserving MCFG table memory at [mem 0x7ffdf000-0x7ffdf03b] ACPI: Reserving SSDT table memory at [mem 0x7ffac000-0x7ffac516] ACPI: Reserving LPIT table memory at [mem 0x7ffab000-0x7ffab093] ACPI: Reserving WSMT table memory at [mem 0x7ffaa000-0x7ffaa027] ACPI: Reserving SSDT table memory at [mem 0x7ffa9000-0x7ffa929e] ACPI: Reserving SSDT table memory at [mem 0x7ffa8000-0x7ffa8345] ACPI: Reserving SSDT table memory at [mem 0x7ffa4000-0x7ffa7001] ACPI: Reserving SSDT table memory at [mem 0x7ffa3000-0x7ffa351d] ACPI: Reserving DBGP table memory at [mem 0x7ffa2000-0x7ffa2033] ACPI: Reserving DBG2 table memory at [mem 0x7ffa1000-0x7ffa1053] ACPI: Reserving SSDT table memory at [mem 0x7ff9f000-0x7ffa02e5] ACPI: Reserving SSDT table memory at [mem 0x7ff9d000-0x7ff9e7ad] ACPI: Reserving DMAR table memory at [mem 0x7ff9c000-0x7ff9c137] ACPI: Reserving FPDT table memory at [mem 0x7ff9b000-0x7ff9b043] ACPI: Reserving BGRT table memory at [mem 0x7ff9a000-0x7ff9a037] No NUMA configuration found [ 0.021817] Faking a node at [mem 0x0000000000000000-0x0000000271ffffff] NODE_DATA(0) allocated [mem 0x271fd5000-0x271ffffff] Zone ranges: [ 0.022354] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x0000000271ffffff] Device empty [ 0.022362] Movable zone start for each node [ 0.022365] Early memory node ranges [ 0.022366] node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x000000000009dfff] node 0: [mem 0x0000000000100000-0x0000000055aa8fff] node 0: [mem 0x0000000055aab000-0x000000007dd0dfff] node 0: [mem 0x000000007fffe000-0x000000007fffefff] node 0: [mem 0x0000000100000000-0x0000000271ffffff] Initmem setup node 0 [mem 0x0000000000001000-0x0000000271ffffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.022384] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.022417] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.027160] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.027317] On node 0, zone DMA32: 8944 pages in unavailable ranges [ 0.041540] On node 0, zone Normal: 1 pages in unavailable ranges [ 0.041970] On node 0, zone Normal: 24576 pages in unavailable ranges [ 0.041985] Reserving Intel graphics memory at [mem 0x89000000-0x8cffffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.042445] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.042448] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.042449] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.042450] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.042451] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.042452] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.042453] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.042454] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.042455] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.042456] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.042457] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.042458] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.042459] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.042460] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.042461] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.042462] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.042493] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.042498] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.042500] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.042507] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.042508] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.042518] e820: update [mem 0x63c5f000-0x63c72fff] usable ==> reserved [ 0.042539] TSC deadline timer available [ 0.042540] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.042576] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x55335000-0x55335fff] PM: hibernation: Registered nosave memory: [mem 0x55345000-0x55345fff] PM: hibernation: Registered nosave memory: [mem 0x55aa9000-0x55aa9fff] PM: hibernation: Registered nosave memory: [mem 0x55aaa000-0x55aaafff] PM: hibernation: Registered nosave memory: [mem 0x63b95000-0x63b95fff] PM: hibernation: Registered nosave memory: [mem 0x63c5f000-0x63c72fff] PM: hibernation: Registered nosave memory: [mem 0x7dd0e000-0x7f10dfff] PM: hibernation: Registered nosave memory: [mem 0x7f10e000-0x7f7fdfff] PM: hibernation: Registered nosave memory: [mem 0x7f7fe000-0x7fffdfff] PM: hibernation: Registered nosave memory: [mem 0x7ffff000-0x8cffffff] PM: hibernation: Registered nosave memory: [mem 0x8d000000-0xdfffffff] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfcffffff] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xfe7fffff] PM: hibernation: Registered nosave memory: [mem 0xfe800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed0ffff] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed19fff] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed83fff] PM: hibernation: Registered nosave memory: [mem 0xfed84000-0xfed84fff] PM: hibernation: Registered nosave memory: [mem 0xfed85000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xff9fffff] PM: hibernation: Registered nosave memory: [mem 0xffa00000-0xffffffff] [mem 0x8d000000-0xdfffffff] available for PCI devices [ 0.042625] Booting paravirtualized kernel on bare hardware [ 0.042627] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.042637] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.042820] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.042831] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.042834] pcpu-alloc: [0] 0 1 2 3 [ 0.042877] Fallback order for Node 0: 0 [ 0.042880] Built 1 zonelists, mobility grouping on. Total pages: 1998872 [ 0.042882] Policy zone: Normal [ 0.042883] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.19.0-31-generic root=UUID=HASH_19D-F52F-C90F-403F-AB5459319DB1 ro quiet splash vt.handoff=7 [ 0.042986] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.19.0-31-generic", will be passed to user space. [ 0.043520] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.043790] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.043861] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.082961] Memory: 7694876K/8123044K available (18440K kernel code, 4055K rwdata, 11256K rodata, 3160K init, 4908K bss, 427908K reserved, 0K cma-reserved) [ 0.083118] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.083135] Kernel/User page tables isolation: enabled [ 0.083168] ftrace: allocating 52012 entries in 204 pages [ 0.095257] ftrace: allocated 204 pages with 4 groups [ 0.096293] Dynamic Preempt: voluntary [ 0.096326] rcu: Preemptible hierarchical RCU implementation. [ 0.096327] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.096329] Trampoline variant of Tasks RCU enabled. [ 0.096330] Rude variant of Tasks RCU enabled. [ 0.096330] Tracing variant of Tasks RCU enabled. [ 0.096331] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.096332] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.102120] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.102355] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.102524] Console: colour dummy device 80x25 [ 0.102562] printk: console [tty0] enabled [ 0.102598] ACPI: Core revision 20220331 [ 0.103008] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.103010] APIC: Switch to symmetric I/O mode setup [ 0.103013] DMAR: Host address width 39 [ 0.103014] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.103024] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.103028] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.103033] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.103035] DMAR: RMRR base: 0x0000007efab000 end: 0x0000007efcafff [ 0.103038] DMAR: RMRR base: 0x00000088800000 end: 0x0000008cffffff [ 0.103040] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.103041] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1 [ 0.103042] DMAR: ANDD device: 3 name: \_SB.PCI0.I2C2 [ 0.103043] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00 [ 0.103045] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.103047] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.103049] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.103050] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.104874] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.104876] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.108811] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.108821] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=8799984) [ 0.108825] pid_max: default: 32768 minimum: 301 [ 0.112792] LSM: Security Framework initializing [ 0.112810] landlock: Up and running. [ 0.112811] Yama: becoming mindful. [ 0.112816] AppArmor: AppArmor initialized [ 0.112816] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.112816] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.112816] x86/cpu: VMX (outside TXT) disabled by BIOS [ 0.112816] x86/cpu: SGX virtualization disabled due to lack of VMX. [ 0.112816] CPU0: Thermal monitoring enabled (TM1) [ 0.112816] process: using mwait in idle threads [ 0.112816] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.112816] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.112816] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.112816] Spectre V2 : Mitigation: IBRS [ 0.112816] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.112816] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.112816] RETBleed: Mitigation: IBRS [ 0.112816] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.112816] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.112816] MDS: Mitigation: Clear CPU buffers [ 0.112816] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.112816] SRBDS: Mitigation: Microcode [ 0.112816] Freeing SMP alternatives memory: 44K [ 0.112816] smpboot: CPU0: Intel(R) Core(TM) i3-8130U CPU @ 2.20GHz (family: 0x6, model: 0x8e, stepping: 0xa) [ 0.112816] cblist_init_generic: Setting adjustable number of callback queues. [ 0.112816] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.112816] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.112816] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.112816] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.112816] ... version: 4 [ 0.112816] ... bit width: 48 [ 0.112816] ... generic registers: 4 [ 0.112816] ... value mask: 0000ffffffffffff [ 0.112816] ... max period: 00007fffffffffff [ 0.112816] ... fixed-purpose events: 3 [ 0.112816] ... event mask: 000000070000000f [ 0.112816] Estimated ratio of average max frequency by base frequency (times 1024): 1582 [ 0.112816] rcu: Hierarchical SRCU implementation. [ 0.112816] rcu: Max phase no-delay instances is 1000. [ 0.112816] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.112816] smp: Bringing up secondary CPUs ... [ 0.112816] x86: Booting SMP configuration: [ 0.112816] .... node #0, CPUs: #1 #2 [ 0.115427] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.115427] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.115427] #3 [ 0.117600] smp: Brought up 1 node, 4 CPUs [ 0.117600] smpboot: Max logical packages: 1 [ 0.117600] smpboot: Total of 4 processors activated (17599.96 BogoMIPS) [ 0.119063] devtmpfs: initialized [ 0.119063] x86/mm: Memory block size: 128MB [ 0.121575] ACPI: PM: Registering ACPI NVS region [mem 0x55aa9000-0x55aa9fff] (4096 bytes) [ 0.121579] ACPI: PM: Registering ACPI NVS region [mem 0x7f10e000-0x7f7fdfff] (7274496 bytes) [ 0.121782] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.121791] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.121853] pinctrl core: initialized pinctrl subsystem [ 0.122096] PM: RTC time: 20:43:54, date: 2023-02-18 [ 0.122540] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.122765] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.122861] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.122942] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.123167] thermal_sys: Registered thermal governor 'fair_share' [ 0.123169] thermal_sys: Registered thermal governor 'bang_bang' [ 0.123171] thermal_sys: Registered thermal governor 'step_wise' [ 0.123172] thermal_sys: Registered thermal governor 'user_space' [ 0.123173] thermal_sys: Registered thermal governor 'power_allocator' [ 0.123181] EISA bus registered [ 0.123193] cpuidle: using governor ladder [ 0.123198] cpuidle: using governor menu [ 0.123261] Simple Boot Flag at 0x44 set to 0x80 [ 0.123261] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB [ 0.123261] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.123261] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.123261] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.123261] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.123261] PCI: Using configuration type 1 for base access [ 0.123261] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.126037] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.126046] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB [ 0.126046] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.126046] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.126046] fbcon: Taking over console [ 0.126046] ACPI: Added _OSI(Module Device) [ 0.126046] ACPI: Added _OSI(Processor Device) [ 0.126046] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.126046] ACPI: Added _OSI(Processor Aggregator Device) [ 0.126046] ACPI: Added _OSI(Linux-Dell-Video) [ 0.126046] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.126046] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.218752] ACPI: 15 ACPI AML tables successfully acquired and loaded [ 0.224149] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.234374] ACPI: Dynamic OEM Table Load: [ 0.234394] ACPI: SSDT 0xFFFF9E9B00FDA800 00060F (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.237597] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked [ 0.242149] ACPI: Dynamic OEM Table Load: [ 0.242164] ACPI: SSDT 0xFFFF9E9B01152C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.246147] ACPI: Dynamic OEM Table Load: [ 0.246163] ACPI: SSDT 0xFFFF9E9B00E26000 000D14 (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.250896] ACPI: Dynamic OEM Table Load: [ 0.250910] ACPI: SSDT 0xFFFF9E9B01152400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.253957] ACPI: Dynamic OEM Table Load: [ 0.253971] ACPI: SSDT 0xFFFF9E9B01153C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.261836] ACPI: EC: EC started [ 0.261838] ACPI: EC: interrupt blocked [ 0.300823] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.300827] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.300829] ACPI: Interpreter enabled [ 0.300902] ACPI: PM: (supports S0 S3 S4 S5) [ 0.300904] ACPI: Using IOAPIC for interrupt routing [ 0.300967] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.300969] PCI: Using E820 reservations for host bridge windows [ 0.305218] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.349755] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.360182] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.360193] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.369514] PCI host bridge to bus 0000:00 [ 0.369517] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x8d000000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe80ffff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000 [ 0.369792] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 [ 0.369804] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.369845] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.370179] pci 0000:00:04.0: reg 0x10: [mem 0xa1120000-0xa1127fff 64bit] pci 0000:00:13.0: [8086:9d35] type 00 class 0x000000 [ 0.370747] pci 0000:00:13.0: reg 0x10: [mem 0xa1132000-0xa1132fff 64bit] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.371681] pci 0000:00:14.0: reg 0x10: [mem 0xa1110000-0xa111ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.372986] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.373009] pci 0000:00:14.2: reg 0x10: [mem 0xa1133000-0xa1133fff 64bit] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.373509] pci 0000:00:15.0: reg 0x10: [mem 0xa1134000-0xa1134fff 64bit] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 [ 0.375140] pci 0000:00:15.1: reg 0x10: [mem 0xa1135000-0xa1135fff 64bit] pci 0000:00:15.2: [8086:9d62] type 00 class 0x118000 [ 0.376772] pci 0000:00:15.2: reg 0x10: [mem 0xa1136000-0xa1136fff 64bit] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.378095] pci 0000:00:16.0: reg 0x10: [mem 0xa1137000-0xa1137fff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.379054] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601 [ 0.379073] pci 0000:00:17.0: reg 0x10: [mem 0xa1130000-0xa1131fff] pci 0000:00:17.0: reg 0x14: [mem 0xa113c000-0xa113c0ff] pci 0000:00:17.0: reg 0x18: [io 0x4080-0x4087] pci 0000:00:17.0: reg 0x1c: [io 0x4088-0x408b] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f] pci 0000:00:17.0: reg 0x24: [mem 0xa113a000-0xa113a7ff] pci 0000:00:17.0: PME# supported from D3hot [ 0.379714] pci 0000:00:1c.0: [8086:9d15] type 01 class 0x060400 [ 0.379819] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.381100] pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000 [ 0.381312] pci 0000:00:1e.0: reg 0x10: [mem 0xa1138000-0xa1138fff 64bit] pci 0000:00:1e.6: [8086:9d2d] type 00 class 0x080501 [ 0.382648] pci 0000:00:1e.6: reg 0x10: [mem 0xa1139000-0xa1139fff 64bit] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 [ 0.383828] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.383848] pci 0000:00:1f.2: reg 0x10: [mem 0xa112c000-0xa112ffff] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300 [ 0.384385] pci 0000:00:1f.3: reg 0x10: [mem 0xa1128000-0xa112bfff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0xa1100000-0xa110ffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.385992] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.386054] pci 0000:00:1f.4: reg 0x10: [mem 0xa113b000-0xa113b0ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0x4040-0x405f] pci 0000:01:00.0: [10ec:c821] type 00 class 0x028000 [ 0.386876] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff] pci 0000:01:00.0: reg 0x18: [mem 0xa1000000-0xa100ffff 64bit] pci 0000:01:00.0: supports D1 D2 [ 0.387193] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.387549] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0xa1000000-0xa10fffff] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.391366] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.391500] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.391634] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.391767] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.391901] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.392034] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.392168] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.409184] ACPI: EC: interrupt unblocked [ 0.409186] ACPI: EC: event unblocked [ 0.409199] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.409201] ACPI: EC: GPE=0x50 [ 0.409203] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.409206] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 0.409301] iommu: Default domain type: Translated [ 0.409301] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.409301] SCSI subsystem initialized [ 0.409301] libata version 3.00 loaded. [ 0.409301] ACPI: bus type USB registered [ 0.409301] usbcore: registered new interface driver usbfs [ 0.409301] usbcore: registered new interface driver hub [ 0.409301] usbcore: registered new device driver usb [ 0.409301] pps_core: LinuxPPS API ver. 1 registered [ 0.409301] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.409301] PTP clock support registered [ 0.409301] EDAC MC: Ver: 3.0.0 [ 0.409301] Registered efivars operations [ 0.409301] NetLabel: Initializing [ 0.409301] NetLabel: domain hash size = 128 [ 0.409301] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.409301] NetLabel: unlabeled traffic allowed by default [ 0.409301] mctp: management component transport protocol core [ 0.409301] NET: Registered PF_MCTP protocol family [ 0.409301] PCI: Using ACPI for IRQ routing [ 0.438895] PCI: pci_cache_line_size set to 64 bytes [ 0.439173] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] e820: reserve RAM buffer [mem 0x55335018-0x57ffffff] e820: reserve RAM buffer [mem 0x55aa9000-0x57ffffff] e820: reserve RAM buffer [mem 0x63b95000-0x63ffffff] e820: reserve RAM buffer [mem 0x63c5f000-0x63ffffff] e820: reserve RAM buffer [mem 0x7dd0e000-0x7fffffff] e820: reserve RAM buffer [mem 0x7ffff000-0x7fffffff] e820: reserve RAM buffer [mem 0x272000000-0x273ffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.439208] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.439208] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.439208] vgaarb: loaded [ 0.439208] clocksource: Switched to clocksource tsc-early [ 0.439208] VFS: Disk quotas dquot_6.6.0 [ 0.439208] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.439208] AppArmor: AppArmor Filesystem Enabled [ 0.439208] pnp: PnP ACPI init [ 0.439208] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.439208] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.439208] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.439208] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.439208] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.439208] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.439208] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.439208] system 00:01: [io 0x2000-0x20fe] has been reserved [ 0.439208] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.439208] system 00:02: [io 0xffff] has been reserved [ 0.439208] system 00:02: [io 0xffff] has been reserved [ 0.439208] system 00:02: [io 0xffff] has been reserved [ 0.439208] system 00:02: [io 0x1800-0x18fe] has been reserved [ 0.439208] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.439208] system 00:04: [io 0x1854-0x1857] has been reserved [ 0.443133] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.443140] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.444985] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.444990] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.444995] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.444999] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.445003] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.445008] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.445012] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.445017] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved [ 0.445021] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.445025] system 00:08: [mem 0x8d000000-0x8d01ffff] has been reserved [ 0.448229] pnp: PnP ACPI: found 9 devices [ 0.455070] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.455210] NET: Registered PF_INET protocol family [ 0.455334] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.458349] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.458389] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.458441] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.458580] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.458681] TCP: Hash tables configured (established 65536 bind 65536) [ 0.458751] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.458791] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.458832] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.458894] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.458900] NET: Registered PF_XDP protocol family [ 0.458916] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0xa1000000-0xa10fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window] pci_bus 0000:00: resource 7 [mem 0x8d000000-0xdfffffff window] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe80ffff window] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0xa1000000-0xa10fffff] PCI: CLS 64 bytes, default 64 [ 0.461288] DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:15.0 [ 0.461295] DMAR: ACPI device "device:73" under DMAR at fed91000 as 00:15.1 [ 0.461301] DMAR: ACPI device "device:74" under DMAR at fed91000 as 00:15.2 [ 0.461307] DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:1e.0 [ 0.461325] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.461327] software IO TLB: mapped [mem 0x0000000079714000-0x000000007d714000] (64MB) [ 0.461347] Trying to unpack rootfs image as initramfs... [ 0.461598] sgx: EPC section 0x80200000-0x85ffffff [ 0.462968] Initialise system trusted keyrings [ 0.462982] Key type blacklist registered [ 0.463025] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.465840] zbud: loaded [ 0.466513] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.466758] fuse: init (API version 7.36) [ 0.467015] integrity: Platform Keyring initialized [ 0.467020] integrity: Machine keyring initialized [ 0.477996] Key type asymmetric registered [ 0.478000] Asymmetric key parser 'x509' registered [ 1.284272] Freeing initrd memory: 113440K [ 1.289116] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.289149] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.289188] io scheduler mq-deadline registered [ 1.289928] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 1.290021] pcieport 0000:00:1c.0: AER: enabled with IRQ 122 [ 1.290139] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.292515] ACPI: AC: AC Adapter [ADP1] (on-line) [ 1.292616] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:01/input/input0 [ 1.292640] ACPI: button: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.292698] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.292784] ACPI: button: Power Button [PWRF] ACPI: \_TZ_.TZS0: Invalid passive threshold [ 1.299088] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.299093] ACPI: thermal: Thermal Zone [TZS0] (63 C) [ 1.299827] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.299830] ACPI: thermal: Thermal Zone [TZS1] (50 C) [ 1.300345] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.303172] hpet_acpi_add: no address or irqs in _CRS [ 1.303202] Linux agpgart interface v0.103 [ 1.306748] ACPI: battery: Slot [BAT0] (battery present) [ 1.319591] loop: module loaded [ 1.319936] tun: Universal TUN/TAP device driver, 1.6 [ 1.319989] PPP generic driver version 2.4.2 [ 1.320127] VFIO - User Level meta-driver version: 0.3 [ 1.320237] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.320243] ehci-pci: EHCI PCI platform driver [ 1.320254] ehci-platform: EHCI generic platform driver [ 1.320266] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.320275] ohci-pci: OHCI PCI platform driver [ 1.320285] ohci-platform: OHCI generic platform driver [ 1.320295] uhci_hcd: USB Universal Host Controller Interface driver [ 1.320356] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.327590] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.327598] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.327751] mousedev: PS/2 mouse device common for all mice [ 1.327937] rtc_cmos 00:03: RTC can wake from S4 [ 1.328652] rtc_cmos 00:03: registered as rtc0 [ 1.328786] rtc_cmos 00:03: setting system clock to 2023-02-18T20:43:56 UTC (1676753036) [ 1.328807] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram [ 1.328831] i2c_dev: i2c /dev entries driver [ 1.328998] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 1.329032] device-mapper: uevent: version 1.0.3 [ 1.329113] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 1.329139] platform eisa.0: Probing EISA bus 0 [ 1.329142] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.329144] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.329146] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.329148] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.329150] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.329152] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.329154] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.329156] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.329158] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.329160] platform eisa.0: EISA: Detected 0 cards [ 1.329164] intel_pstate: Intel P-state driver initializing [ 1.329426] intel_pstate: HWP enabled [ 1.329459] ledtrig-cpu: registered to indicate activity on CPUs [ 1.329482] efifb: probing for efifb [ 1.329503] efifb: showing boot graphics [ 1.330219] efifb: framebuffer at 0x90000000, using 8100k, total 8100k [ 1.330221] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.330223] efifb: scrolling: redraw [ 1.330224] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.330322] Console: switching to colour frame buffer device 240x67 [ 1.332522] fb0: EFI VGA frame buffer device [ 1.332529] EFI Variables Facility v0.08 2004-May-17 [ 1.338384] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.383458] intel_pmc_core INT33A1:00: initialized [ 1.383531] drop_monitor: Initializing network drop monitor service [ 1.397858] NET: Registered PF_INET6 protocol family [ 1.401373] Segment Routing with IPv6 [ 1.401383] In-situ OAM (IOAM) with IPv6 [ 1.401404] NET: Registered PF_PACKET protocol family [ 1.401432] Key type dns_resolver registered [ 1.401949] microcode: sig=0x806ea, pf=0x80, revision=0xf0 [ 1.402014] microcode: Microcode Update Driver: v2.2. [ 1.402019] IPI shorthand broadcast: enabled [ 1.402038] sched_clock: Marking stable (1395506760, 6363796)->(1462891154, -61020598) [ 1.402294] registered taskstats version 1 [ 1.402381] Loading compiled-in X.509 certificates [ 1.403095] Loaded X.509 cert 'Build time autogenerated kernel key: 88f1d130b7684b167a4b134ac9b9840b92c4f97f' [ 1.403525] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.403948] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.403949] blacklist: Loading compiled-in revocation X.509 certificates [ 1.403965] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.403978] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 1.403992] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 1.404007] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 1.404020] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 1.404032] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 1.404045] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 1.404059] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 1.404163] zswap: loaded using pool lzo/zbud [ 1.404246] Key type .fscrypt registered [ 1.404247] Key type fscrypt-provisioning registered [ 1.404385] Key type trusted registered [ 1.407150] Key type encrypted registered [ 1.407154] AppArmor: AppArmor sha1 policy hashing enabled [ 1.408775] integrity: Loading X.509 certificate: UEFI:db [ 1.408811] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.408812] integrity: Loading X.509 certificate: UEFI:db [ 1.408842] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.408844] integrity: Loading X.509 certificate: UEFI:db [ 1.408859] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7' [ 1.410318] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 1.410538] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 1.410543] Loading compiled-in module X.509 certificates [ 1.410969] Loaded X.509 cert 'Build time autogenerated kernel key: 88f1d130b7684b167a4b134ac9b9840b92c4f97f' [ 1.410971] ima: Allocated hash algorithm: sha1 [ 1.437621] evm: Initialising EVM extended attributes: [ 1.437625] evm: security.selinux [ 1.437628] evm: security.SMACK64 [ 1.437630] evm: security.SMACK64EXEC [ 1.437632] evm: security.SMACK64TRANSMUTE [ 1.437634] evm: security.SMACK64MMAP [ 1.437635] evm: security.apparmor [ 1.437637] evm: security.ima [ 1.437639] evm: security.capability [ 1.437641] evm: HMAC attrs: 0x1 [ 1.440597] PM: Magic number: 11:135:751 [ 1.440610] misc uinput: hash matches [ 1.440625] tty ttyS2: hash matches [ 1.440943] RAS: Correctable Errors collector initialized. [ 1.440965] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7 [ 1.443397] Freeing unused decrypted memory: 2036K [ 1.444469] Freeing unused kernel image (initmem) memory: 3160K [ 1.461287] Write protecting the kernel read-only data: 32768k [ 1.462555] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.463047] Freeing unused kernel image (rodata/data gap) memory: 1032K [ 1.480887] tsc: Refined TSC clocksource calibration: 2208.001 MHz [ 1.480898] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b918d37, max_idle_ns: 440795205649 ns [ 1.531689] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.531690] x86/mm: Checking user space page tables [ 1.531697] clocksource: Switched to clocksource tsc [ 1.575972] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.575983] Run /init as init process [ 1.575984] with arguments: [ 1.575986] /init [ 1.575987] splash [ 1.575988] with environment: [ 1.575988] HOME=/ [ 1.575989] TERM=linux [ 1.575990] BOOT_IMAGE=/boot/vmlinuz-5.19.0-31-generic [ 1.727455] hid: raw HID events driver (C) Jiri Kosina [ 1.731173] acpi PNP0C14:02: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:01) [ 1.731203] wmi_bus wmi_bus-PNP0C14:02: WQBJ data block query control method not found [ 1.762121] sdhci: Secure Digital Host Controller Interface driver [ 1.762125] sdhci: Copyright(c) Pierre Ossman [ 1.764124] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.764132] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.765225] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 1.765898] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.765905] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.765909] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.765959] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 [ 1.765963] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.765965] usb usb1: Product: xHCI Host Controller [ 1.765967] usb usb1: Manufacturer: Linux 5.19.0-31-generic xhci-hcd [ 1.765969] usb usb1: SerialNumber: ... [ 1.766095] hub 1-0:1.0: USB hub found [ 1.766118] hub 1-0:1.0: 12 ports detected [ 1.770538] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19 [ 1.770542] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.770545] usb usb2: Product: xHCI Host Controller [ 1.770547] usb usb2: Manufacturer: Linux 5.19.0-31-generic xhci-hcd [ 1.770549] usb usb2: SerialNumber: ... [ 1.770924] hub 2-0:1.0: USB hub found [ 1.771079] hub 2-0:1.0: 6 ports detected [ 1.774614] usb: port power management may be unreliable [ 1.797092] cryptd: max_cpu_qlen set to 1000 [ 1.797612] ACPI: bus type drm_connector registered [ 1.798022] ahci 0000:00:17.0: version 3.0 [ 1.798326] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.798331] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.798790] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 1.798866] scsi host0: ahci [ 1.798950] ata1: SATA max UDMA/133 abar m2048@0xa113a000 port 0xa113a100 irq 124 [ 1.799190] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 1.799421] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.799450] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.821010] i2c i2c-0: 1/2 memory slots populated (from DMI) [ 1.822013] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.825555] sdhci-pci 0000:00:1e.6: SDHCI controller found [8086:9d2d] (rev 21) [ 1.834135] mmc0: SDHCI controller on PCI [0000:00:1e.6] using ADMA 64-bit [ 1.835441] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 1.835680] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 1.849274] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) [ 1.849539] idma64 idma64.2: Found Intel integrated DMA 64-bit [ 1.853489] AVX2 version of gcm_enc/dec engaged. [ 1.853528] AES CTR mode by8 optimization enabled [ 1.863909] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002) [ 1.864164] idma64 idma64.3: Found Intel integrated DMA 64-bit [ 2.028845] usb 1-2: new full-speed USB device number 2 using xhci_hcd [ 2.112377] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.113007] ata1.00: ATA-10: WDC WD5000LPCX-60VHAT1, 03.01A03, max UDMA/133 [ 2.113142] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.113983] ata1.00: configured for UDMA/133 [ 2.124603] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPCX-6 1A03 PQ: 0 ANSI: 5 [ 2.125580] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.125760] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.125771] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.125809] sd 0:0:0:0: [sda] Write Protect is off [ 2.125818] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.125880] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.125968] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 2.179950] usb 1-2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 2.179965] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.179972] usb 1-2: Product: USB Receiver [ 2.179977] usb 1-2: Manufacturer: Logitech [ 2.206120] sda: sda1 sda2 [ 2.206721] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.235390] input: ELAN2514:00 04F3:31F3 Touchscreen as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2514:00/0018:04F3:31F3.0001/input/input6 [ 2.235710] input: ELAN2514:00 04F3:31F3 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2514:00/0018:04F3:31F3.0001/input/input7 [ 2.235893] input: ELAN2514:00 04F3:31F3 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2514:00/0018:04F3:31F3.0001/input/input8 [ 2.236075] input: ELAN2514:00 04F3:31F3 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2514:00/0018:04F3:31F3.0001/input/input9 [ 2.236528] hid-generic 0018:04F3:31F3.0001: input,hidraw0: I2C HID v1.00 Device [ELAN2514:00 04F3:31F3] on i2c-ELAN2514:00 [ 2.308664] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 2.464846] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4762] usb 1-4: New USB device found, idVendor=04f2, idProduct=b627, bcdDevice=32.48 [ 2.464913] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.464915] usb 1-4: Product: HP Wide Vision HD Camera [ 2.464917] usb 1-4: Manufacturer: Chicony [ 2.490637] psmouse serio1: synaptics: queried min coordinates: x [1306..], y [1156..] psmouse serio1: synaptics: Your touchpad (PNP: SYN3273 ETD0000 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 2.541034] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.16, id: 0x1e2a1, caps: 0xf00523/0x840300/0x12e800/0x500000, board id: 3408, fw id: 2751213 [ 2.573110] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.592642] usb 1-5: new full-speed USB device number 4 using xhci_hcd [ 2.602559] checking generic (90000000 7e9000) vs hw (a0000000 1000000) [ 2.602563] checking generic (90000000 7e9000) vs hw (90000000 10000000) [ 2.602564] fb0: switching to i915 from EFI VGA [ 2.602637] Console: switching to colour dummy device 80x25 [ 2.602678] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.604391] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.604883] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 2.613746] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=2 [ 2.618114] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.622257] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.652190] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 2.654885] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.655273] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 2.683353] fbcon: i915drmfb (fb0) is primary device [ 2.702362] Console: switching to colour frame buffer device 240x67 [ 2.724845] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 2.745719] usb 1-5: New USB device found, idVendor=0bda, idProduct=b00a, bcdDevice= 1.10 [ 2.745747] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.745758] usb 1-5: Product: Bluetooth Radio [ 2.745765] usb 1-5: Manufacturer: Realtek [ 2.745775] usb 1-5: SerialNumber: ... [ 2.787797] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C534.0004/input/input13 [ 2.845361] hid-generic 0003:046D:C534.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0 [ 2.848561] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0005/input/input14 [ 2.849112] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0005/input/input15 [ 2.909300] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0005/input/input16 [ 2.909871] hid-generic 0003:046D:C534.0005: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1 [ 2.909999] usbcore: registered new interface driver usbhid [ 2.910005] usbhid: USB HID core driver [ 2.995304] logitech-djreceiver 0003:046D:C534.0004: hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-2/input0 [ 3.170409] logitech-djreceiver 0003:046D:C534.0005: hiddev0,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-2/input1 [ 3.230534] logitech-djreceiver 0003:046D:C534.0005: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 3.232529] logitech-djreceiver 0003:046D:C534.0005: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 3.233123] input: Logitech Wireless Keyboard PID:4075 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0005/0003:046D:4075.0006/input/input19 [ 3.235225] hid-generic 0003:046D:4075.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:00:14.0-2/input1:1 [ 3.237609] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0005/0003:046D:4054.0007/input/input24 [ 3.238003] hid-generic 0003:046D:4054.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:14.0-2/input1:2 [ 3.339246] input: Logitech Wireless Keyboard PID:4075 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0005/0003:046D:4075.0006/input/input28 [ 3.339661] logitech-hidpp-device 0003:046D:4075.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4075] on usb-0000:00:14.0-2/input1:1 [ 3.378914] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C534.0005/0003:046D:4054.0007/input/input29 [ 3.379435] logitech-hidpp-device 0003:046D:4054.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:14.0-2/input1:2 [ 3.904835] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 9.814713] pstore: Using crash dump compression: deflate [ 9.814728] pstore: Registered efi as persistent store backend [ 9.926928] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 10.366645] lp: driver loaded but no devices found [ 10.408055] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 10.471384] ppdev: user-space parallel port driver [ 11.352072] loop0: detected capacity change from 0 to 489712 [ 11.352269] loop1: detected capacity change from 0 to 492776 [ 11.353735] loop2: detected capacity change from 0 to 926512 [ 11.356581] loop3: detected capacity change from 0 to 129600 [ 11.358290] loop4: detected capacity change from 0 to 8 [ 11.358524] loop5: detected capacity change from 0 to 129480 [ 11.359155] loop6: detected capacity change from 0 to 709280 [ 11.361135] loop7: detected capacity change from 0 to 13792 [ 11.361896] loop8: detected capacity change from 0 to 149312 [ 11.362006] loop9: detected capacity change from 0 to 187776 [ 11.369753] loop11: detected capacity change from 0 to 24328 [ 11.369788] loop10: detected capacity change from 0 to 149304 [ 11.370451] loop12: detected capacity change from 0 to 102048 [ 11.372421] loop13: detected capacity change from 0 to 102072 [ 15.121001] input: Wireless hotkeys as /devices/virtual/input/input30 [ 15.544618] Consider using thermal netlink events interface [ 16.357457] hp_accel: laptop model unknown, using default axes configuration [ 16.374090] lis3lv02d: unknown sensor type 0x0 [ 16.457824] acpi INT33D6:00: intel-vbtn: created platform device [ 16.460491] input: Intel Virtual Buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:01/INT33D6:01/input/input31 [ 16.460874] input: Intel Virtual Switches as /devices/pci0000:00/0000:00:1f.0/PNP0C09:01/INT33D6:01/input/input32 [ 16.467649] input: Intel Virtual Buttons as /devices/platform/INT33D6:00/input/input33 [ 16.468123] input: Intel Virtual Switches as /devices/platform/INT33D6:00/input/input34 [ 16.895594] acer_wmi: Acer Laptop ACPI-WMI Extras [ 16.897121] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 16.897279] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 16.914377] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 16.986850] input: ELAN2514:00 04F3:31F3 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2514:00/0018:04F3:31F3.0001/input/input35 [ 16.986983] input: ELAN2514:00 04F3:31F3 UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2514:00/0018:04F3:31F3.0001/input/input36 [ 16.987059] input: ELAN2514:00 04F3:31F3 UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2514:00/0018:04F3:31F3.0001/input/input37 [ 16.987138] input: ELAN2514:00 04F3:31F3 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN2514:00/0018:04F3:31F3.0001/input/input38 [ 16.987266] hid-multitouch 0018:04F3:31F3.0001: input,hidraw0: I2C HID v1.00 Device [ELAN2514:00 04F3:31F3] on i2c-ELAN2514:00 [ 17.126653] intel_rapl_common: Found RAPL domain package [ 17.126657] intel_rapl_common: Found RAPL domain dram [ 17.129731] dw-apb-uart.3: ttyS4 at MMIO 0xa1138000 (irq = 20, base_baud = 115200) is a 16550A [ 17.251628] mei_me 0000:00:16.0: enabling device (0004 -> 0006) [ 17.664395] mc: Linux media interface: v0.10 [ 17.789360] Bluetooth: Core ver 2.22 [ 17.789406] NET: Registered PF_BLUETOOTH protocol family [ 17.789408] Bluetooth: HCI device and connection manager initialized [ 17.789419] Bluetooth: HCI socket layer initialized [ 17.789425] Bluetooth: L2CAP socket layer initialized [ 17.789433] Bluetooth: SCO socket layer initialized [ 17.823400] videodev: Linux video capture interface: v2.00 [ 18.097224] input: HP WMI hotkeys as /devices/virtual/input/input41 [ 18.361538] usbcore: registered new interface driver btusb [ 18.365873] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000c lmp_ver=08 lmp_subver=8821 [ 18.366569] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 18.366581] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_fw.bin [ 18.571349] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 18.571353] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 18.571354] RAPL PMU: hw unit of domain package 2^-14 Joules [ 18.571355] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 18.571356] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 18.694740] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 18.779739] Bluetooth: hci0: RTL: loading rtl_bt/rtl8821c_config.bin [ 18.780381] Bluetooth: hci0: RTL: cfg_sz 10, total sz 34926 [ 18.846715] intel_rapl_common: Found RAPL domain package [ 18.846726] intel_rapl_common: Found RAPL domain core [ 18.846732] intel_rapl_common: Found RAPL domain uncore [ 18.846738] intel_rapl_common: Found RAPL domain dram [ 18.862541] intel_tcc_cooling: Programmable TCC Offset detected [ 18.899126] rtw_8821ce 0000:01:00.0: Firmware version 24.11.0, H2C version 12 [ 19.032557] rtw_8821ce 0000:01:00.0 wlo1: renamed from wlan0 [ 19.143274] usb 1-4: Found UVC 1.00 device HP Wide Vision HD Camera (04f2:b627) [ 19.162408] input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input42 [ 19.162586] usbcore: registered new interface driver uvcvideo [ 19.248523] Bluetooth: hci0: RTL: fw version 0x75b8f098 [ 19.747889] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 19.926530] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 19.926548] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 19.926556] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 19.926563] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 19.926567] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 19.926573] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 [ 19.926580] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 20.686035] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input43 [ 20.686128] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input44 [ 20.686225] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input45 [ 20.686309] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input46 [ 20.686404] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input47 [ 20.686490] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input48 [ 20.686574] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input49 [ 28.082713] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.082718] Bluetooth: BNEP filters: protocol multicast [ 28.082723] Bluetooth: BNEP socket layer initialized [ 28.213327] NET: Registered PF_ALG protocol family [ 37.144420] Lockdown: Xorg: raw io port access is restricted; see man kernel_lockdown.7 [ 39.867096] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [ 39.870772] loop14: detected capacity change from 0 to 8 [ 40.413164] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [ 40.414818] wlo1: authenticated [ 40.417290] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [ 40.419391] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=3) [ 40.419836] wlo1: associated [ 40.632935] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [ 40.661068] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 47.781733] Bluetooth: RFCOMM TTY layer initialized [ 47.781758] Bluetooth: RFCOMM socket layer initialized [ 47.781776] Bluetooth: RFCOMM ver 1.11 [ 401.374608] logitech-hidpp-device 0003:046D:4054.0007: HID++ 4.5 device connected. [ 419.506852] logitech-hidpp-device 0003:046D:4075.0006: HID++ 4.5 device connected. [ 813.004525] kscreenlocker_g[1499]: segfault at 8 ip 00007efcf24d305e sp 00007fffe1283500 error 4 in libQt5XcbQpa.so.5.15.6[7efcf24bf000+d2000] Code: e9 47 5c ff ff 90 66 0f 1f 44 00 00 f3 0f 1e fa 53 48 89 fb 48 8b 7f 20 e8 2f 3f ff ff 48 8b 7b 20 31 d2 89 c6 e8 72 65 ff ff <8b> 58 08 48 89 c7 e8 f7 27 ff ff 89 d8 5b c3 90 66 90 f3 0f 1e fa [ 1271.410178] perf: interrupt took too long (2540 > 2500), lowering kernel.perf_event_max_sample_rate to 78500 [ 1742.583370] perf: interrupt took too long (3186 > 3175), lowering kernel.perf_event_max_sample_rate to 62750 [ 2063.445488] perf: interrupt took too long (4042 > 3982), lowering kernel.perf_event_max_sample_rate to 49250 [ 2602.415765] perf: interrupt took too long (5091 > 5052), lowering kernel.perf_event_max_sample_rate to 39250 [ 3912.869388] perf: interrupt took too long (6446 > 6363), lowering kernel.perf_event_max_sample_rate to 31000 [17122.009305] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 1=UNSPECIFIED) [17126.713808] wlo1: authenticate with 587F2031297F7F2DA7DFA2AD7E848BDA [17127.252560] wlo1: send auth to 587F2031297F7F2DA7DFA2AD7E848BDA (try 1/3) [17127.254348] wlo1: authenticated [17127.272088] wlo1: associate with 587F2031297F7F2DA7DFA2AD7E848BDA (try 1/3) [17127.274496] wlo1: RX AssocResp from 587F2031297F7F2DA7DFA2AD7E848BDA (capab=0x1111 status=0 aid=1) [17127.275040] wlo1: associated [20360.350983] wlo1: disconnect from AP 587F2031297F7F2DA7DFA2AD7E848BDA for new auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C [20360.403254] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [20360.946414] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [20360.947826] wlo1: authenticated [20360.954388] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [20360.956599] wlo1: RX ReassocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=2) [20360.956934] wlo1: associated [20361.023542] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [23412.642315] usb 1-2: USB disconnect, device number 2 [41847.709369] i2c_hid_acpi i2c-ELAN2514:00: i2c_hid_get_input: incomplete report (67/21845) [41847.709877] i2c_hid_acpi i2c-ELAN2514:00: device returned incorrect report (255 vs 13 expected) [77566.341610] i2c_hid_acpi i2c-ELAN2514:00: i2c_hid_get_input: incomplete report (67/21845) [77566.342113] i2c_hid_acpi i2c-ELAN2514:00: device returned incorrect report (255 vs 13 expected) [103806.413161] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 1=UNSPECIFIED) [103811.136835] wlo1: authenticate with 587F2031297F7F2DA7DFA2AD7E848BDA [103811.669696] wlo1: send auth to 587F2031297F7F2DA7DFA2AD7E848BDA (try 1/3) [103811.674196] wlo1: authenticated [103811.685828] wlo1: associate with 587F2031297F7F2DA7DFA2AD7E848BDA (try 1/3) [103811.689749] wlo1: RX AssocResp from 587F2031297F7F2DA7DFA2AD7E848BDA (capab=0x1111 status=0 aid=1) [103811.690275] wlo1: associated [123226.115129] i2c_hid_acpi i2c-ELAN2514:00: i2c_hid_get_input: incomplete report (67/21845) [123226.115629] i2c_hid_acpi i2c-ELAN2514:00: device returned incorrect report (255 vs 13 expected) [131033.608139] wlo1: deauthenticated from 587F2031297F7F2DA7DFA2AD7E848BDA (Reason: 1=UNSPECIFIED) [131038.292415] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [131038.834213] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [131038.835946] wlo1: authenticated [131038.857835] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [131038.860050] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=2) [131038.860526] wlo1: associated [131039.008287] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [146451.687071] loop14: detected capacity change from 0 to 149312 [169805.929676] i2c_hid_acpi i2c-ELAN2514:00: i2c_hid_get_input: incomplete report (67/21845) [169805.930116] i2c_hid_acpi i2c-ELAN2514:00: device returned incorrect report (255 vs 13 expected) [202245.599634] i2c_hid_acpi i2c-ELAN2514:00: i2c_hid_get_input: incomplete report (67/21845) [202245.600134] i2c_hid_acpi i2c-ELAN2514:00: device returned incorrect report (255 vs 13 expected) [225335.597998] i2c_hid_acpi i2c-ELAN2514:00: i2c_hid_get_input: incomplete report (67/21845) [225335.601643] i2c_hid_acpi i2c-ELAN2514:00: device returned incorrect report (255 vs 13 expected) [289395.270468] i2c_hid_acpi i2c-ELAN2514:00: i2c_hid_get_input: incomplete report (67/21845) [289395.270972] i2c_hid_acpi i2c-ELAN2514:00: device returned incorrect report (255 vs 13 expected) [303847.909313] rtw_8821ce 0000:01:00.0: timed out to flush queue 2 [303848.049130] rtw_8821ce 0000:01:00.0: timed out to flush queue 2 [320739.154806] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [320743.838441] wlo1: authenticate with C1FEC03FDA69470E0424439FD0842D36 [320743.838455] wlo1: bad VHT capabilities, disabling VHT [320744.482933] wlo1: send auth to C1FEC03FDA69470E0424439FD0842D36 (try 1/3) [320744.520399] wlo1: send auth to C1FEC03FDA69470E0424439FD0842D36 (try 2/3) [320744.554745] wlo1: send auth to C1FEC03FDA69470E0424439FD0842D36 (try 3/3) [320744.590855] wlo1: authentication with C1FEC03FDA69470E0424439FD0842D36 timed out [321174.765623] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [321175.310116] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [321175.311655] wlo1: authenticated [321175.314298] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [321175.316459] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [321175.316740] wlo1: associated [321175.358158] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [321175.374217] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [321383.221885] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [321384.002123] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [321384.533653] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [321384.540253] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [321384.546722] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [321384.553157] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [321939.797487] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [321940.332067] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [321940.333620] wlo1: authenticated [321940.336242] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [321940.338290] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=6) [321940.338593] wlo1: associated [321940.360115] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [321940.384170] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [322073.173460] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [322073.941085] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [322074.476279] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [322074.485049] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [322074.495336] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [322074.507725] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [322508.904864] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [322509.442326] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [322509.443719] wlo1: authenticated [322509.446314] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [322509.448550] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [322509.448844] wlo1: associated [322509.498428] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [322509.526372] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [322715.654979] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [322716.435441] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [322716.970092] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [322716.977946] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [322716.985933] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [322716.998112] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [323150.795147] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [323151.328298] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [323151.329929] wlo1: authenticated [323151.336280] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [323151.338547] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=1) [323151.338835] wlo1: associated [323151.376341] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [323151.376408] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [323358.517224] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [323359.317532] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [323359.852221] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [323359.859639] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [323359.867552] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [323359.878702] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [323793.893161] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [323794.430250] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [323794.431754] wlo1: authenticated [323794.434237] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [323794.437164] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=6) [323794.437458] wlo1: associated [323794.490356] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [323794.538465] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [324001.254758] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [324002.039143] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [324002.574105] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [324002.580673] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [324002.588731] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [324002.600677] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [324436.794308] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [324437.328198] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [324437.329696] wlo1: authenticated [324437.332191] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [324437.334283] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [324437.334590] wlo1: associated [324437.380281] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [324437.433967] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [324642.644372] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [324643.421383] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [324643.956094] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [324643.962539] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [324643.970482] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [324643.981483] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [325077.851211] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [325078.382145] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [325078.392317] wlo1: authenticated [325078.394138] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [325078.396279] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=1) [325078.396574] wlo1: associated [325078.438188] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [325078.438250] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [325284.869942] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [325285.651427] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [325286.197989] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [325286.212492] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [325286.222087] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [325286.233209] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [325720.793034] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [325721.324092] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [325721.325605] wlo1: authenticated [325721.328215] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [325721.330185] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [325721.330473] wlo1: associated [325721.372189] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [325721.383106] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [325928.537140] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [325929.321352] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [325929.855995] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [325929.863822] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [325929.871788] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [325929.882894] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [326363.895515] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [326364.426033] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [326364.427740] wlo1: authenticated [326364.430022] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [326364.432178] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=7) [326364.432484] wlo1: associated [326364.486136] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [326364.486235] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [326571.102794] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [326571.875052] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [326572.409976] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [326572.420085] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [326572.428073] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [326572.437820] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [327006.787222] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [327007.323979] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [327007.325485] wlo1: authenticated [327007.328106] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [327007.330159] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [327007.330451] wlo1: associated [327007.376077] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [327007.422724] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [327218.981356] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [327219.773315] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [327220.307919] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [327220.318120] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [327220.427828] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [327220.438892] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [327654.737797] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [327655.269907] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [327655.271419] wlo1: authenticated [327655.273893] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [327655.275947] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [327655.276536] wlo1: associated [327655.314003] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [327655.324257] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [327862.377923] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [327863.163229] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [327863.697746] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [327863.704334] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [327863.712292] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [327863.722196] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [328297.803878] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [328298.339851] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [328298.341387] wlo1: authenticated [328298.343977] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [328298.345999] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [328298.346293] wlo1: associated [328298.391935] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [328298.448805] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [328504.170796] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [328504.937114] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [328505.471591] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [328505.479642] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [328505.487516] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [328505.498603] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [328939.802961] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [328940.333798] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [328940.335212] wlo1: authenticated [328940.337789] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [328940.339939] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [328940.340215] wlo1: associated [328940.373896] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [328940.384307] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [329147.130276] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [329147.899052] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [329148.433721] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [329148.440283] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [329148.448289] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [329148.459446] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [329582.870551] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [329583.407738] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [329583.409256] wlo1: authenticated [329583.411722] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [329583.413864] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [329583.414154] wlo1: associated [329583.451842] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [329583.463595] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [329791.027183] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [329791.812917] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [329792.347636] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [329792.356241] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [329792.365996] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [329792.378436] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [330226.822469] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [330227.357679] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [330227.359119] wlo1: authenticated [330227.365664] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [330227.367837] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=6) [330227.368141] wlo1: associated [330227.372944] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [330227.417772] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [330434.526989] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [330435.327134] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [330435.861415] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [330435.867861] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [330435.875852] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [330435.888263] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [330869.785397] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [330870.327622] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [330870.329184] wlo1: authenticated [330870.331612] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [330870.333664] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [330870.333955] wlo1: associated [330870.375715] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [330870.411665] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [331077.239823] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [331078.019747] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [331078.559526] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [331078.568467] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [331078.578915] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [331078.591374] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [331122.512283] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 [331122.512327] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [331122.512330] pcieport 0000:00:1c.0: device [8086:9d15] error status/mask=00003000/00002000 [331122.512336] pcieport 0000:00:1c.0: [12] Timeout [331512.778705] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [331513.309567] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [331513.311078] wlo1: authenticated [331513.313557] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [331513.315722] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [331513.316002] wlo1: associated [331513.357674] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [331513.406421] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [331719.845229] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [331720.623255] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [331721.157399] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [331721.167595] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [331721.177377] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [331721.188971] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [332155.770275] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [332156.303513] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [332156.305017] wlo1: authenticated [332156.307501] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [332156.309456] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [332156.309844] wlo1: associated [332156.331549] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [332156.351611] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [332363.038715] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [332798.778088] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [332799.309455] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [332799.310857] wlo1: authenticated [332799.317436] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [332799.319845] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [332799.320131] wlo1: associated [332799.361542] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [332799.366584] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [333007.648614] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [333008.405986] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [333008.937205] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [333008.944832] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [333008.952771] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [333008.963759] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [333443.787409] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [333444.319392] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [333444.320981] wlo1: authenticated [333444.323380] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [333444.325747] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [333444.326127] wlo1: associated [333444.371487] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [333444.426362] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [333649.226550] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [333649.988783] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [333650.522991] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [333650.530902] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [333650.538937] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [333650.550577] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [334084.852765] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [334085.389346] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [334085.390732] wlo1: authenticated [334085.393483] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [334085.395751] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [334085.396026] wlo1: associated [334085.445443] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [334085.481361] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [334291.395516] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [334292.174680] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [334292.709066] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [334292.717057] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [334292.725110] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [334292.736223] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [334726.857271] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [334727.391289] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [334727.392937] wlo1: authenticated [334727.395276] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [334727.397453] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [334727.397735] wlo1: associated [334727.435388] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [334727.437123] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [334936.332903] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [334937.112497] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [334937.647123] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [334937.657391] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [334937.667154] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [334937.678024] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [335371.710734] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [335372.245226] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [335372.246689] wlo1: authenticated [335372.253205] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [335372.255352] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [335372.255636] wlo1: associated [335372.305335] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [335372.351948] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [335582.579523] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [335583.342544] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [335583.877099] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [335583.886689] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [335583.896402] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [335583.909037] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [336017.887557] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [336018.423160] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [336018.424988] wlo1: authenticated [336018.427176] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [336018.429295] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [336018.429610] wlo1: associated [336018.487264] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [336018.487724] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [336227.581469] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [336228.348341] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [336228.882818] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [336228.893747] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [336228.907048] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [336228.917066] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [336662.853621] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [336663.385095] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [336663.386575] wlo1: authenticated [336663.389078] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [336663.391220] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=6) [336663.391516] wlo1: associated [336663.433198] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [336663.473123] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [336869.592477] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [336870.382256] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [336870.916967] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [336870.926508] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [336870.936800] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [336870.948865] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [337304.761539] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [337305.295042] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [337305.296506] wlo1: authenticated [337305.299027] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [337305.301179] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=6) [337305.301485] wlo1: associated [337305.335082] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [337305.335139] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [337512.796961] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [337513.559660] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [337514.094989] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [337514.101588] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [337514.109660] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [337514.120739] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [337948.749820] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [337949.280982] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [337949.282501] wlo1: authenticated [337949.285171] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [337949.287284] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [337949.287578] wlo1: associated [337949.333089] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [337949.377006] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [338156.825111] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [338157.610396] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [338158.144699] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [338158.155816] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [338158.168885] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [338158.179430] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [338592.855537] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [338593.394926] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [338593.396424] wlo1: authenticated [338593.399081] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [338593.401117] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [338593.401407] wlo1: associated [338593.451018] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [338593.503990] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [338799.635600] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [338800.403969] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [338800.938826] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [338800.948356] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [338800.962501] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [338800.973264] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [339235.845164] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [339236.380868] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [339236.382416] wlo1: authenticated [339236.384861] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [339236.386894] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [339236.387184] wlo1: associated [339236.424966] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [339236.470488] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [339442.909414] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [339443.686059] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [339444.220709] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [339444.227198] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [339444.235196] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [339444.246263] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [339878.875347] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [339879.418812] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [339879.420297] wlo1: authenticated [339879.422820] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [339879.425033] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=6) [339879.425313] wlo1: associated [339879.466913] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [339879.514865] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [340086.864660] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [340087.644131] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [340088.178536] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [340088.185140] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [340088.193165] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [340088.204357] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [340522.746149] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [340523.284751] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [340523.286266] wlo1: authenticated [340523.292734] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [340523.294956] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=6) [340523.295267] wlo1: associated [340523.328798] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [340523.348854] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [340729.655076] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [340730.417257] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [340730.948630] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [340730.958746] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [340730.968043] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [340730.979389] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [341165.850461] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [341166.382694] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [341166.384553] wlo1: authenticated [341166.386816] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [341166.389059] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [341166.389338] wlo1: associated [341166.426792] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [341166.487875] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [341372.824239] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [341373.591885] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [341374.126532] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [341374.134184] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [341374.142155] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [341374.153140] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [341808.748938] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [341809.284636] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [341809.286054] wlo1: authenticated [341809.288629] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [341809.290783] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [341809.291085] wlo1: associated [341809.332745] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [341809.345989] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [342017.525532] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [342018.282022] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [342018.824415] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [342018.835053] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [342018.848521] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [342018.858343] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [342452.740335] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [342453.278579] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [342453.280018] wlo1: authenticated [342453.282563] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [342453.284597] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [342453.284904] wlo1: associated [342453.318705] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [342453.354590] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [342660.804713] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [342661.588294] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [342662.122266] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [342662.128901] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [342662.135787] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [342662.146416] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [343096.770723] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [343097.312519] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [343097.314003] wlo1: authenticated [343097.316700] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [343097.319306] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [343097.319595] wlo1: associated [343097.392616] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [343097.400885] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [343304.556105] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [343305.312992] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [343305.844400] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [343305.852063] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [343305.860116] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [343305.871158] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [343739.740166] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [343740.282460] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [343740.284262] wlo1: authenticated [343740.286637] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [343740.288757] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [343740.289090] wlo1: associated [343740.330565] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [343740.339372] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [343947.085407] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [343947.839623] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [343948.378397] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [343948.388046] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [343948.502158] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [343948.510102] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [344382.823686] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [344383.356405] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [344383.357939] wlo1: authenticated [344383.360394] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [344383.362440] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [344383.362738] wlo1: associated [344383.412509] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [344383.412612] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [344589.509926] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [344590.269488] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [344590.804285] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [344590.814967] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [344590.828220] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [344590.839251] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [345024.761944] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [345025.294353] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [345025.295888] wlo1: authenticated [345025.298336] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [345025.300379] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=3) [345025.300667] wlo1: associated [345025.338388] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [345025.338453] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [345233.716440] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [345234.486804] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [345235.022113] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [345235.032748] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [345235.046118] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [345235.154198] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [345669.833878] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [345670.372288] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [345670.373831] wlo1: authenticated [345670.380272] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [345670.382341] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [345670.382622] wlo1: associated [345670.424390] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [345670.452306] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [345876.572853] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [345877.337555] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [345877.872181] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [345877.882498] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [345877.896081] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [345877.906414] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [346311.734067] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [346312.278238] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [346312.279833] wlo1: authenticated [346312.282286] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [346312.284536] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [346312.284831] wlo1: associated [346312.322280] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [346312.338335] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [346521.208987] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [346521.986536] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [346522.529965] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [346522.536481] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [346522.546261] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [346522.554064] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [346905.019994] i2c_hid_acpi i2c-ELAN2514:00: i2c_hid_get_input: incomplete report (67/21845) [346905.020439] i2c_hid_acpi i2c-ELAN2514:00: device returned incorrect report (255 vs 13 expected) [346956.748577] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [346957.280176] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [346957.281713] wlo1: authenticated [346957.284243] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [346957.286421] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [346957.286710] wlo1: associated [346957.328268] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [346957.373909] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [347166.065570] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [347166.825056] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [347167.359993] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [347167.370356] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [347167.384048] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [347167.491517] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [347601.732386] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [347602.266110] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [347602.267599] wlo1: authenticated [347602.270097] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [347602.272317] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [347602.272614] wlo1: associated [347602.310207] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [347602.373214] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [347807.377955] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [347808.155079] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [347808.690056] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [347808.700602] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [347808.713958] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [347808.724424] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [348242.827175] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [348243.360060] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [348243.361530] wlo1: authenticated [348243.364052] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [348243.366067] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=6) [348243.366364] wlo1: associated [348243.412171] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [348243.448071] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [348450.802760] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [348451.565340] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [348452.103896] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [348452.114190] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [348452.127936] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [348452.138466] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [348886.823994] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [348887.366002] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [348887.367399] wlo1: authenticated [348887.369994] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [348887.372211] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [348887.372511] wlo1: associated [348887.414098] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [348887.462052] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [349094.389822] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [349095.183181] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [349095.717744] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [349095.725740] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [349095.733758] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [349095.744938] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [349529.735323] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [349530.271944] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [349530.273463] wlo1: authenticated [349530.276090] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [349530.278313] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=8) [349530.278618] wlo1: associated [349530.308053] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [349530.328047] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [349736.943898] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [349737.720941] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [349738.255782] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [349738.266423] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [349738.279818] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [349738.290713] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [350172.716121] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [350173.249886] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [350173.251371] wlo1: authenticated [350173.254139] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [350173.256337] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [350173.256643] wlo1: associated [350173.293988] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [350173.321936] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [350380.066367] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [350380.858888] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [350381.393610] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [350381.403937] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [350381.417687] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [350381.427921] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [350815.823566] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [350816.363832] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [350816.365227] wlo1: authenticated [350816.367823] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [350816.370034] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=8) [350816.370309] wlo1: associated [350816.407932] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [350816.449153] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [351023.891572] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [351024.681135] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [351025.215675] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [351025.222696] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [351025.231764] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [351025.241886] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [351459.769879] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [351460.301772] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [351460.303322] wlo1: authenticated [351460.305828] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [351460.307873] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=7) [351460.308178] wlo1: associated [351460.357806] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [351460.357861] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [351665.550615] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [351670.146255] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [351670.681608] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [351670.688149] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [351670.694696] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [351670.705015] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [352100.798256] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [352101.339720] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [352101.341230] wlo1: authenticated [352101.343837] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [352101.346014] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [352101.346308] wlo1: associated [352101.407815] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [352101.447755] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [352309.215182] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [352309.987981] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [352310.519562] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [352310.526966] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [352310.534874] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [352310.545993] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [352744.803505] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [352745.341660] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [352745.343188] wlo1: authenticated [352745.345680] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [352745.347871] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=7) [352745.348173] wlo1: associated [352745.409771] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [352745.422796] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [352954.114423] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [352954.887005] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [352955.421435] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [352955.431970] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [352955.444638] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [352955.453897] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [353389.807487] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [353390.351600] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [353390.353138] wlo1: authenticated [353390.355585] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [353390.357785] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=4) [353390.358087] wlo1: associated [353390.403633] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [353390.403688] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [353598.066639] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [353598.824912] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [353599.359503] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [353599.369249] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [353599.383048] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [353599.393467] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [354033.810242] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [354034.345555] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [354034.347048] wlo1: authenticated [354034.353522] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [354034.355818] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=7) [354034.356099] wlo1: associated [354034.389584] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [354034.405644] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [354240.697965] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [354241.470002] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [354242.001218] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [354242.009366] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [354242.017386] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [354242.028287] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [354676.801528] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [354677.335486] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [354677.336962] wlo1: authenticated [354677.339469] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [354677.341738] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=1) [354677.342046] wlo1: associated [354677.399575] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [354677.411008] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [354883.337430] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [354884.108754] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [354884.643209] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [354884.649817] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [354884.657860] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [354884.669074] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [355318.791228] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [355319.329429] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [355319.330928] wlo1: authenticated [355319.333417] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [355319.335808] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [355319.336108] wlo1: associated [355319.369595] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [355319.369967] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [355525.909347] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [355526.694663] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [355527.229271] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [355527.239894] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [355527.247980] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [355527.259398] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [356324.700875] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [356325.246216] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [356325.247679] wlo1: authenticated [356325.250276] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [356325.252410] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=7) [356325.252710] wlo1: associated [356325.302309] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [356325.334223] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [356527.160234] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [356527.946492] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [356528.477925] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [356528.485832] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [356528.494153] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [356528.505602] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [357083.794022] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [357084.331787] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [357084.333235] wlo1: authenticated [357084.335804] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [357084.338020] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=7) [357084.338323] wlo1: associated [357084.379883] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [357084.411815] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [357279.577849] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [357280.341131] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [357280.879689] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [357280.887628] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [357280.895558] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [357280.903674] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [357714.770398] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [357715.301767] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [357715.303273] wlo1: authenticated [357715.305759] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [357715.307884] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=6) [357715.308183] wlo1: associated [357715.349857] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [357715.397856] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [357921.529487] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [357922.299830] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [357922.833691] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [357922.840262] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [357922.847868] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [357922.859654] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [358356.788045] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [358357.323711] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [358357.326619] wlo1: authenticated [358357.327837] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [358357.330044] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=5) [358357.330347] wlo1: associated [358357.371761] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [358357.395813] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [358563.601661] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 3=DEAUTH_LEAVING) [358564.377093] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [358564.911671] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [358564.918661] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 2/3) [358564.925299] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 3/3) [358564.935050] wlo1: authentication with 2EA2EF30BD7672E4F97C3BCE4C67CD8C timed out [358783.765096] wlo1: authenticate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C [358784.298345] wlo1: send auth to 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [358784.300042] wlo1: authenticated [358784.302334] wlo1: associate with 2EA2EF30BD7672E4F97C3BCE4C67CD8C (try 1/3) [358784.304779] wlo1: RX AssocResp from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (capab=0x1011 status=0 aid=7) [358784.305062] wlo1: associated [358784.350380] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [358784.350458] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [359127.052882] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by 2EA2EF30BD7672E4F97C3BCE4C67CD8C [369288.408200] i2c_hid_acpi i2c-ELAN2514:00: i2c_hid_get_input: incomplete report (67/21845) [369288.408627] i2c_hid_acpi i2c-ELAN2514:00: device returned incorrect report (255 vs 13 expected) [369762.918205] wlo1: deauthenticated from 2EA2EF30BD7672E4F97C3BCE4C67CD8C (Reason: 1=UNSPECIFIED) [369767.565318] wlo1: authenticate with 587F2031297F7F2DA7DFA2AD7E848BDA [369768.100035] wlo1: send auth to 587F2031297F7F2DA7DFA2AD7E848BDA (try 1/3) [369768.102030] wlo1: authenticated [369768.115563] wlo1: associate with 587F2031297F7F2DA7DFA2AD7E848BDA (try 1/3) [369768.120481] wlo1: RX AssocResp from 587F2031297F7F2DA7DFA2AD7E848BDA (capab=0x1511 status=0 aid=2) [369768.120953] wlo1: associated [437121.737580] usb 1-1: new high-speed USB device number 6 using xhci_hcd [437121.907334] usb 1-1: New USB device found, idVendor=0930, idProduct=6544, bcdDevice= 1.00 [437121.907346] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [437121.907350] usb 1-1: Product: USB Flash Memory [437121.907354] usb 1-1: Manufacturer: [437121.907357] usb 1-1: SerialNumber: ... [437122.049233] usb-storage 1-1:1.0: USB Mass Storage device detected [437122.049662] scsi host1: usb-storage 1-1:1.0 [437122.049968] usbcore: registered new interface driver usb-storage [437122.075368] usbcore: registered new interface driver uas [437123.264323] scsi 1:0:0:0: Direct-Access USB Flash Memory 1.00 PQ: 0 ANSI: 4 [437123.265178] sd 1:0:0:0: Attached scsi generic sg1 type 0 [437123.266058] sd 1:0:0:0: [sdb] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB) [437123.266353] sd 1:0:0:0: [sdb] Write Protect is off [437123.266366] sd 1:0:0:0: [sdb] Mode Sense: 45 00 00 00 [437123.266632] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [437123.270865] sdb: sdb1 [437123.271073] sd 1:0:0:0: [sdb] Attached SCSI removable disk