[ 0.000000] Linux version 6.8.12-11-pve (XXX@XXX) (gcc (Debian 12.2.0-14+deb12u1) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC PMX 6.8.12-11 (2025-05-22T09:39Z) () [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.8.12-11-pve root=/dev/mapper/XXXXXXXX ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d4240fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d4241000-0x00000000d4241fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d4242000-0x00000000d4242fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000d4243000-0x00000000daf89fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000daf8a000-0x00000000dc1a1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dc1a2000-0x00000000dc22dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dc22e000-0x00000000dca07fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dca08000-0x00000000dcf43fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dcf44000-0x00000000dcffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] e820: update [mem 0xd1dc4018-0xd1dd4057] usable ==> usable [ 0.000000] e820: update [mem 0xd1dc4018-0xd1dd4057] usable ==> usable [ 0.000000] e820: update [mem 0xd1db3018-0xd1dc3457] usable ==> usable [ 0.000000] e820: update [mem 0xd1db3018-0xd1dc3457] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000d1db3017] usable [ 0.000000] reserve setup_data: [mem 0x00000000d1db3018-0x00000000d1dc3457] usable [ 0.000000] reserve setup_data: [mem 0x00000000d1dc3458-0x00000000d1dc4017] usable [ 0.000000] reserve setup_data: [mem 0x00000000d1dc4018-0x00000000d1dd4057] usable [ 0.000000] reserve setup_data: [mem 0x00000000d1dd4058-0x00000000d4240fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000d4241000-0x00000000d4241fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000d4242000-0x00000000d4242fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000d4243000-0x00000000daf89fff] usable [ 0.000000] reserve setup_data: [mem 0x00000000daf8a000-0x00000000dc1a1fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dc1a2000-0x00000000dc22dfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000dc22e000-0x00000000dca07fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000dca08000-0x00000000dcf43fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000dcf44000-0x00000000dcffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dd000000-0x00000000dfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041dffffff] usable [ 0.000000] efi: EFI v2.5 by American Megatrends [ 0.000000] efi: TPMFinalLog=0xdc9d8000 ACPI 2.0=0xdc1be000 ACPI=0xdc1be000 SMBIOS=0xdcde4000 SMBIOS 3.0=0xdcde3000 ESRT=0xd7d1f1d8 MOKvar=0xdcdfe000 TPMEventLog=0xdc1b1018 [ 0.000000] efi: Remove mem45: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map [ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved [ 0.000000] efi: Not removing mem46: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] efi: Not removing mem47: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem48: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem49: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem50: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: LENOVO 10MR0023FR/3111, BIOS M1AKT48A 11/22/2019 [ 0.000000] tsc: Detected 3400.000 MHz processor [ 0.000000] tsc: Detected 3399.906 MHz TSC [ 0.001204] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001207] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001217] last_pfn = 0x41e000 max_arch_pfn = 0x400000000 [ 0.001220] MTRR map: 4 entries (3 fixed + 1 variable; max 23), built from 10 variable MTRRs [ 0.001222] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001683] last_pfn = 0xdd000 max_arch_pfn = 0x400000000 [ 0.008507] esrt: Reserving ESRT space from 0x00000000d7d1f1d8 to 0x00000000d7d1f238. [ 0.008512] e820: update [mem 0xd7d1f000-0xd7d1ffff] usable ==> reserved [ 0.008528] Using GB pages for direct mapping [ 0.009012] secureboot: Secure boot enabled [ 0.009013] RAMDISK: [mem 0x3b8e9000-0x3fffafff] ACPI: Early table checksum verification disabled [ 0.009020] ACPI: RSDP 0x00000000DC1BE000 000024 (v02 LENOVO) [ 0.009024] ACPI: XSDT 0x00000000DC1BE0B8 0000EC (v01 LENOVO TC-M1A 00001480 AMI 00010013) [ 0.009029] ACPI: FACP 0x00000000DC1ED3D8 000114 (v06 LENOVO TC-M1A 00001480 AMI 00010013) [ 0.009034] ACPI: DSDT 0x00000000DC1BE230 02F1A8 (v02 LENOVO TC-M1A 00001480 INTL 20160422) [ 0.009037] ACPI: FACS 0x00000000DC9D7C40 000040 [ 0.009040] ACPI: APIC 0x00000000DC1ED4F0 000084 (v03 LENOVO TC-M1A 00001480 AMI 00010013) [ 0.009043] ACPI: FPDT 0x00000000DC1ED578 000044 (v01 LENOVO TC-M1A 00001480 AMI 00010013) [ 0.009046] ACPI: MCFG 0x00000000DC1ED5C0 00003C (v01 LENOVO TC-M1A 00001480 MSFT 00000097) [ 0.009049] ACPI: SSDT 0x00000000DC1ED600 0003BC (v01 LENOVO TC-M1A 00001480 INTL 20160422) [ 0.009052] ACPI: FIDT 0x00000000DC1ED9C0 00009C (v01 LENOVO TC-M1A 00001480 AMI 00010013) [ 0.009055] ACPI: SLIC 0x00000000DC1EDA60 000176 (v01 LENOVO TC-M1A 00001480 AMI 00010013) [ 0.009058] ACPI: MSDM 0x00000000DC1EDBD8 000055 (v03 LENOVO TC-M1A 00001480 AMI 00010013) [ 0.009061] ACPI: SSDT 0x00000000DC1EDC30 003159 (v02 LENOVO TC-M1A 00001480 INTL 20160422) [ 0.009064] ACPI: SSDT 0x00000000DC1F0D90 0026E8 (v02 LENOVO TC-M1A 00001480 INTL 20160422) [ 0.009067] ACPI: HPET 0x00000000DC1F3478 000038 (v01 LENOVO TC-M1A 00001480 MSFT 0000005F) [ 0.009070] ACPI: SSDT 0x00000000DC1F34B0 000C59 (v02 LENOVO TC-M1A 00001480 INTL 20160422) [ 0.009073] ACPI: UEFI 0x00000000DC1F4110 000042 (v01 LENOVO TC-M1A 00001480 01000013) [ 0.009076] ACPI: SSDT 0x00000000DC1F4158 000EDE (v02 LENOVO TC-M1A 00001480 INTL 20160422) [ 0.009079] ACPI: LPIT 0x00000000DC1F5038 000094 (v01 LENOVO TC-M1A 00001480 MSFT 0000005F) [ 0.009082] ACPI: WSMT 0x00000000DC1F50D0 000028 (v01 LENOVO TC-M1A 00001480 MSFT 0000005F) [ 0.009084] ACPI: SSDT 0x00000000DC1F50F8 00029F (v02 LENOVO TC-M1A 00001480 INTL 20160422) [ 0.009087] ACPI: SSDT 0x00000000DC1F5398 003002 (v02 LENOVO TC-M1A 00001480 INTL 20160422) [ 0.009090] ACPI: DBGP 0x00000000DC1F83A0 000034 (v01 LENOVO TC-M1A 00001480 MSFT 0000005F) [ 0.009093] ACPI: DBG2 0x00000000DC1F83D8 000054 (v00 LENOVO TC-M1A 00001480 MSFT 0000005F) [ 0.009096] ACPI: DMAR 0x00000000DC1F8430 0000A8 (v01 LENOVO TC-M1A 00001480 INTL 00000001) [ 0.009099] ACPI: BGRT 0x00000000DC1F84D8 000038 (v01 LENOVO TC-M1A 00001480 AMI 00010013) [ 0.009102] ACPI: TPM2 0x00000000DC1F8510 000034 (v03 LENOVO TC-M1A 00001480 AMI 00000000) [ 0.009105] ACPI: LUFT 0x00000000DC1F8548 0349E2 (v01 LENOVO TC-M1A 00001480 AMI 00010013) [ 0.009108] ACPI: ASF! 0x00000000DC22CF30 0000A0 (v32 LENOVO TC-M1A 00001480 TFSM 000F4240) [ 0.009110] ACPI: Reserving FACP table memory at [mem 0xdc1ed3d8-0xdc1ed4eb] ACPI: Reserving DSDT table memory at [mem 0xdc1be230-0xdc1ed3d7] ACPI: Reserving FACS table memory at [mem 0xdc9d7c40-0xdc9d7c7f] ACPI: Reserving APIC table memory at [mem 0xdc1ed4f0-0xdc1ed573] ACPI: Reserving FPDT table memory at [mem 0xdc1ed578-0xdc1ed5bb] ACPI: Reserving MCFG table memory at [mem 0xdc1ed5c0-0xdc1ed5fb] ACPI: Reserving SSDT table memory at [mem 0xdc1ed600-0xdc1ed9bb] ACPI: Reserving FIDT table memory at [mem 0xdc1ed9c0-0xdc1eda5b] ACPI: Reserving SLIC table memory at [mem 0xdc1eda60-0xdc1edbd5] ACPI: Reserving MSDM table memory at [mem 0xdc1edbd8-0xdc1edc2c] ACPI: Reserving SSDT table memory at [mem 0xdc1edc30-0xdc1f0d88] ACPI: Reserving SSDT table memory at [mem 0xdc1f0d90-0xdc1f3477] ACPI: Reserving HPET table memory at [mem 0xdc1f3478-0xdc1f34af] ACPI: Reserving SSDT table memory at [mem 0xdc1f34b0-0xdc1f4108] ACPI: Reserving UEFI table memory at [mem 0xdc1f4110-0xdc1f4151] ACPI: Reserving SSDT table memory at [mem 0xdc1f4158-0xdc1f5035] ACPI: Reserving LPIT table memory at [mem 0xdc1f5038-0xdc1f50cb] ACPI: Reserving WSMT table memory at [mem 0xdc1f50d0-0xdc1f50f7] ACPI: Reserving SSDT table memory at [mem 0xdc1f50f8-0xdc1f5396] ACPI: Reserving SSDT table memory at [mem 0xdc1f5398-0xdc1f8399] ACPI: Reserving DBGP table memory at [mem 0xdc1f83a0-0xdc1f83d3] ACPI: Reserving DBG2 table memory at [mem 0xdc1f83d8-0xdc1f842b] ACPI: Reserving DMAR table memory at [mem 0xdc1f8430-0xdc1f84d7] ACPI: Reserving BGRT table memory at [mem 0xdc1f84d8-0xdc1f850f] ACPI: Reserving TPM2 table memory at [mem 0xdc1f8510-0xdc1f8543] ACPI: Reserving LUFT table memory at [mem 0xdc1f8548-0xdc22cf29] ACPI: Reserving ASF! table memory at [mem 0xdc22cf30-0xdc22cfcf] No NUMA configuration found [ 0.009248] Faking a node at [mem 0x0000000000000000-0x000000041dffffff] NODE_DATA(0) allocated [mem 0x41dfd5000-0x41dffffff] Zone ranges: [ 0.009434] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000041dffffff] Device empty [ 0.009440] Movable zone start for each node [ 0.009442] Early memory node ranges [ 0.009442] node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x000000000009dfff] node 0: [mem 0x0000000000100000-0x00000000d4240fff] node 0: [mem 0x00000000d4243000-0x00000000daf89fff] node 0: [mem 0x00000000dcf44000-0x00000000dcffffff] node 0: [mem 0x0000000100000000-0x000000041dffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000041dffffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009454] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009472] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.013815] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.013893] On node 0, zone DMA32: 8122 pages in unavailable ranges [ 0.030019] On node 0, zone Normal: 12288 pages in unavailable ranges [ 0.030097] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.030106] Reserving Intel graphics memory at [mem 0xde000000-0xdfffffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.030365] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.030367] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.030368] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.030369] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.030395] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.030398] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.030400] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.030404] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.030405] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.030411] e820: update [mem 0xd79fe000-0xd7a46fff] usable ==> reserved [ 0.030423] TSC deadline timer available [ 0.030424] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.030439] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xd1db3000-0xd1db3fff] PM: hibernation: Registered nosave memory: [mem 0xd1dc3000-0xd1dc3fff] PM: hibernation: Registered nosave memory: [mem 0xd1dc4000-0xd1dc4fff] PM: hibernation: Registered nosave memory: [mem 0xd1dd4000-0xd1dd4fff] PM: hibernation: Registered nosave memory: [mem 0xd4241000-0xd4241fff] PM: hibernation: Registered nosave memory: [mem 0xd4242000-0xd4242fff] PM: hibernation: Registered nosave memory: [mem 0xd79fe000-0xd7a46fff] PM: hibernation: Registered nosave memory: [mem 0xd7d1f000-0xd7d1ffff] PM: hibernation: Registered nosave memory: [mem 0xdaf8a000-0xdc1a1fff] PM: hibernation: Registered nosave memory: [mem 0xdc1a2000-0xdc22dfff] PM: hibernation: Registered nosave memory: [mem 0xdc22e000-0xdca07fff] PM: hibernation: Registered nosave memory: [mem 0xdca08000-0xdcf43fff] PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdfffffff] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [mem 0xe0000000-0xfdffffff] available for PCI devices [ 0.030468] Booting paravirtualized kernel on bare hardware [ 0.030470] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.030476] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.030729] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 [ 0.030735] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 [ 0.030738] pcpu-alloc: [0] 0 1 2 3 [ 0.030756] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.8.12-11-pve root=/dev/mapper/XXXXXXXX ro quiet [ 0.030805] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.8.12-11-pve", will be passed to user space. [ 0.030836] random: crng init done [ 0.032086] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.032708] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.032775] Fallback order for Node 0: 0 [ 0.032778] Built 1 zonelists, mobility grouping on. Total pages: 4100098 [ 0.032779] Policy zone: Normal [ 0.032784] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.032790] software IO TLB: area num 4. [ 0.073924] Memory: 16044508K/16662400K available (20480K kernel code, 3639K rwdata, 13468K rodata, 4816K init, 5696K bss, 617632K reserved, 0K cma-reserved) [ 0.074789] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.074801] Kernel/User page tables isolation: enabled [ 0.074828] ftrace: allocating 55547 entries in 217 pages [ 0.083270] ftrace: allocated 217 pages with 5 groups [ 0.084036] Dynamic Preempt: voluntary [ 0.084092] rcu: Preemptible hierarchical RCU implementation. [ 0.084092] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.084094] Trampoline variant of Tasks RCU enabled. [ 0.084094] Rude variant of Tasks RCU enabled. [ 0.084095] Tracing variant of Tasks RCU enabled. [ 0.084095] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.084096] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.087690] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.087917] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.088100] Console: colour dummy device 80x25 [ 0.088102] printk: legacy console [tty0] enabled [ 0.088145] ACPI: Core revision 20230628 [ 0.088485] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.088556] APIC: Switch to symmetric I/O mode setup [ 0.088559] DMAR: Host address width 39 [ 0.088560] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.088568] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.088570] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.088573] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.088575] DMAR: RMRR base: 0x000000db521000 end: 0x000000db540fff [ 0.088577] DMAR: RMRR base: 0x000000dd800000 end: 0x000000dfffffff [ 0.088579] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.088581] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.088582] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.090155] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.090157] x2apic enabled [ 0.090218] APIC: Switched APIC routing to: cluster x2apic [ 0.094156] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.098550] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3101f59f5e6, max_idle_ns: 440795259996 ns [ 0.098555] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.81 BogoMIPS (lpj=3399906) [ 0.098575] x86/cpu: SGX disabled by BIOS. [ 0.098580] CPU0: Thermal monitoring enabled (TM1) [ 0.098621] process: using mwait in idle threads [ 0.098624] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.098625] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.098631] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.098633] Spectre V2 : Mitigation: IBRS [ 0.098634] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.098634] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.098635] RETBleed: Mitigation: IBRS [ 0.098637] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.098638] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.098639] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.098645] MDS: Mitigation: Clear CPU buffers [ 0.098645] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.098650] SRBDS: Mitigation: Microcode [ 0.098657] GDS: Mitigation: Microcode [ 0.098661] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.098663] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.098664] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.098665] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.098666] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.098668] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.098670] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.098671] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.098673] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.133434] Freeing SMP alternatives memory: 48K [ 0.133437] pid_max: default: 32768 minimum: 301 [ 0.137615] LSM: initializing lsm=lockdown,capability,yama,apparmor,integrity [ 0.137637] Yama: becoming mindful. [ 0.137670] AppArmor: AppArmor initialized [ 0.137716] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.137731] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.139613] smpboot: CPU0: Intel(R) Core(TM) i3-7100T CPU @ 3.40GHz (family: 0x6, model: 0x9e, stepping: 0x9) [ 0.139754] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.139768] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.139783] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.139795] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.139823] ... version: 4 [ 0.139824] ... bit width: 48 [ 0.139825] ... generic registers: 4 [ 0.139826] ... value mask: 0000ffffffffffff [ 0.139827] ... max period: 00007fffffffffff [ 0.139828] ... fixed-purpose events: 3 [ 0.139829] ... event mask: 000000070000000f [ 0.139935] signal: max sigframe size: 2032 [ 0.139950] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 0.141723] rcu: Hierarchical SRCU implementation. [ 0.141724] rcu: Max phase no-delay instances is 400. [ 0.142198] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.142240] smp: Bringing up secondary CPUs ... [ 0.142336] smpboot: x86: Booting SMP configuration: [ 0.142337] .... node #0, CPUs: #1 #2 #3 [ 0.145033] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.145033] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.145033] smp: Brought up 1 node, 4 CPUs [ 0.145033] smpboot: Max logical packages: 1 [ 0.145033] smpboot: Total of 4 processors activated (27199.24 BogoMIPS) [ 0.145994] devtmpfs: initialized [ 0.145994] x86/mm: Memory block size: 128MB [ 0.147637] ACPI: PM: Registering ACPI NVS region [mem 0xd4241000-0xd4241fff] (4096 bytes) [ 0.147637] ACPI: PM: Registering ACPI NVS region [mem 0xdc22e000-0xdca07fff] (8232960 bytes) [ 0.147721] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.147728] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.147789] pinctrl core: initialized pinctrl subsystem [ 0.147972] PM: RTC time: 17:46:52, date: 2025-06-18 [ 0.148446] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.148781] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.148888] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.149009] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.149046] thermal_sys: Registered thermal governor 'fair_share' [ 0.149046] thermal_sys: Registered thermal governor 'bang_bang' [ 0.149046] thermal_sys: Registered thermal governor 'step_wise' [ 0.149046] thermal_sys: Registered thermal governor 'user_space' [ 0.149046] thermal_sys: Registered thermal governor 'power_allocator' [ 0.149046] EISA bus registered [ 0.149046] cpuidle: using governor ladder [ 0.149046] cpuidle: using governor menu [ 0.149046] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.149046] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] PCI: Using configuration type 1 for base access [ 0.149046] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.149635] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.149638] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.149640] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.149642] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.149942] ACPI: Added _OSI(Module Device) [ 0.149942] ACPI: Added _OSI(Processor Device) [ 0.149942] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.149942] ACPI: Added _OSI(Processor Aggregator Device) [ 0.199127] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.202536] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.207844] ACPI: Dynamic OEM Table Load: [ 0.207852] ACPI: SSDT 0xFFFF9F9F81749400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.209448] ACPI: Dynamic OEM Table Load: [ 0.209455] ACPI: SSDT 0xFFFF9F9F81F19800 000717 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.211877] ACPI: Dynamic OEM Table Load: [ 0.211884] ACPI: SSDT 0xFFFF9F9F81F1F000 00065C (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.213750] ACPI: Dynamic OEM Table Load: [ 0.213755] ACPI: SSDT 0xFFFF9F9F8101B000 000197 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.215218] ACPI: Dynamic OEM Table Load: [ 0.215224] ACPI: SSDT 0xFFFF9F9F8101A400 00018A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.219244] ACPI: _OSC evaluated successfully for all CPUs [ 0.220637] ACPI: Interpreter enabled [ 0.220674] ACPI: PM: (supports S0 S3 S4 S5) [ 0.220676] ACPI: Using IOAPIC for interrupt routing [ 0.222623] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.222625] PCI: Using E820 reservations for host bridge windows [ 0.224106] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.227092] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource [ 0.227650] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource [ 0.228143] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource [ 0.233209] ACPI: \_SB_.PCI0.RP09.PXSX.WRST: New power resource [ 0.233576] ACPI: \_SB_.PCI0.RP10.PXSX.WRST: New power resource [ 0.233944] ACPI: \_SB_.PCI0.RP11.PXSX.WRST: New power resource [ 0.234306] ACPI: \_SB_.PCI0.RP12.PXSX.WRST: New power resource [ 0.234672] ACPI: \_SB_.PCI0.RP13.PXSX.WRST: New power resource [ 0.235034] ACPI: \_SB_.PCI0.RP01.PXSX.WRST: New power resource [ 0.235395] ACPI: \_SB_.PCI0.RP02.PXSX.WRST: New power resource [ 0.235762] ACPI: \_SB_.PCI0.RP03.PXSX.WRST: New power resource [ 0.236129] ACPI: \_SB_.PCI0.RP04.PXSX.WRST: New power resource [ 0.236496] ACPI: \_SB_.PCI0.RP05.PXSX.WRST: New power resource [ 0.236867] ACPI: \_SB_.PCI0.RP06.PXSX.WRST: New power resource [ 0.237229] ACPI: \_SB_.PCI0.RP07.PXSX.WRST: New power resource [ 0.237592] ACPI: \_SB_.PCI0.RP08.PXSX.WRST: New power resource [ 0.237957] ACPI: \_SB_.PCI0.RP17.PXSX.WRST: New power resource [ 0.238319] ACPI: \_SB_.PCI0.RP18.PXSX.WRST: New power resource [ 0.238683] ACPI: \_SB_.PCI0.RP19.PXSX.WRST: New power resource [ 0.239047] ACPI: \_SB_.PCI0.RP20.PXSX.WRST: New power resource [ 0.240574] ACPI: \_SB_.PCI0.RP14.PXSX.WRST: New power resource [ 0.240937] ACPI: \_SB_.PCI0.RP15.PXSX.WRST: New power resource [ 0.241299] ACPI: \_SB_.PCI0.RP16.PXSX.WRST: New power resource [ 0.266004] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.266013] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] PCI host bridge to bus 0000:00 [ 0.269443] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000effff window] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:00: root bus resource [bus 00-3e] pci 0000:00:00.0: [8086:590f] type 00 class 0x060000 conventional PCI endpoint [ 0.269653] pci 0000:00:02.0: [8086:5912] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint [ 0.269693] pci 0000:00:02.0: BAR 0 [mem 0xf6000000-0xf6ffffff 64bit] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 conventional PCI endpoint [ 0.270072] pci 0000:00:14.0: BAR 0 [mem 0xf7230000-0xf723ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.270932] pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000 conventional PCI endpoint [ 0.271015] pci 0000:00:14.2: BAR 0 [mem 0xf724e000-0xf724efff 64bit] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000 conventional PCI endpoint [ 0.271225] pci 0000:00:16.0: BAR 0 [mem 0xf724d000-0xf724dfff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.271645] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601 conventional PCI endpoint [ 0.271726] pci 0000:00:17.0: BAR 0 [mem 0xf7248000-0xf7249fff] pci 0000:00:17.0: BAR 1 [mem 0xf724c000-0xf724c0ff] pci 0000:00:17.0: BAR 2 [io 0xf090-0xf097] pci 0000:00:17.0: BAR 3 [io 0xf080-0xf083] pci 0000:00:17.0: BAR 4 [io 0xf060-0xf07f] pci 0000:00:17.0: BAR 5 [mem 0xf724b000-0xf724b7ff] pci 0000:00:17.0: PME# supported from D3hot [ 0.272142] pci 0000:00:1b.0: [8086:a2eb] type 01 class 0x060400 PCIe Root Port [ 0.272194] pci 0000:00:1b.0: PCI bridge to [bus 01] pci 0000:00:1b.0: bridge window [mem 0xf7100000-0xf71fffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.272342] pci 0000:00:1b.0: Intel SPT PCH root port ACS workaround enabled [ 0.272469] pci 0000:00:1c.0: [8086:a295] type 01 class 0x060400 PCIe Root Port [ 0.272520] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [mem 0xf7000000-0xf70fffff] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.272664] pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 0.273390] pci 0000:00:1f.0: [8086:a2c8] type 00 class 0x060100 conventional PCI endpoint [ 0.273796] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000 conventional PCI endpoint [ 0.273870] pci 0000:00:1f.2: BAR 0 [mem 0xf7244000-0xf7247fff] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300 conventional PCI endpoint [ 0.274241] pci 0000:00:1f.3: BAR 0 [mem 0xf7240000-0xf7243fff 64bit] pci 0000:00:1f.3: BAR 4 [mem 0xf7220000-0xf722ffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.274982] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500 conventional PCI endpoint [ 0.275132] pci 0000:00:1f.4: BAR 0 [mem 0xf724a000-0xf724a0ff 64bit] pci 0000:00:1f.4: BAR 4 [io 0xf040-0xf05f] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 conventional PCI endpoint [ 0.275540] pci 0000:00:1f.6: BAR 0 [mem 0xf7200000-0xf721ffff] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.275951] pci 0000:01:00.0: [144d:a804] type 00 class 0x010802 PCIe Endpoint [ 0.276033] pci 0000:01:00.0: BAR 0 [mem 0xf7100000-0xf7103fff 64bit] pci 0000:00:1b.0: PCI bridge to [bus 01] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000 PCIe Endpoint [ 0.277027] pci 0000:02:00.0: BAR 0 [mem 0xf7000000-0xf7001fff 64bit] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.278031] pci 0000:00:1c.0: PCI bridge to [bus 02] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.280883] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.280951] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.281019] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.281087] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.281154] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.281221] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.281288] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.287677] iommu: Default domain type: Translated [ 0.287677] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.287753] SCSI subsystem initialized [ 0.287762] libata version 3.00 loaded. [ 0.287762] ACPI: bus type USB registered [ 0.287762] usbcore: registered new interface driver usbfs [ 0.287762] usbcore: registered new interface driver hub [ 0.287762] usbcore: registered new device driver usb [ 0.287762] pps_core: LinuxPPS API ver. 1 registered [ 0.287762] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.287762] PTP clock support registered [ 0.287762] EDAC MC: Ver: 3.0.0 [ 0.288570] efivars: Registered efivars operations [ 0.288782] NetLabel: Initializing [ 0.288783] NetLabel: domain hash size = 128 [ 0.288784] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.288802] NetLabel: unlabeled traffic allowed by default [ 0.288817] mctp: management component transport protocol core [ 0.288817] NET: Registered PF_MCTP protocol family [ 0.288817] PCI: Using ACPI for IRQ routing [ 0.295720] PCI: pci_cache_line_size set to 64 bytes [ 0.295797] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] e820: reserve RAM buffer [mem 0xd1db3018-0xd3ffffff] e820: reserve RAM buffer [mem 0xd1dc4018-0xd3ffffff] e820: reserve RAM buffer [mem 0xd4241000-0xd7ffffff] e820: reserve RAM buffer [mem 0xd79fe000-0xd7ffffff] e820: reserve RAM buffer [mem 0xd7d1f000-0xd7ffffff] e820: reserve RAM buffer [mem 0xdaf8a000-0xdbffffff] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff] e820: reserve RAM buffer [mem 0x41e000000-0x41fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.295847] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.295847] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.295847] vgaarb: loaded [ 0.295847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.295847] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.297577] clocksource: Switched to clocksource tsc-early [ 0.298341] VFS: Disk quotas dquot_6.6.0 [ 0.298360] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.298501] AppArmor: AppArmor Filesystem Enabled [ 0.298539] pnp: PnP ACPI init [ 0.298906] system 00:00: [io 0x0a00-0x0a0f] has been reserved [ 0.298910] system 00:00: [io 0x0a10-0x0a1f] has been reserved [ 0.298912] system 00:00: [io 0x0a20-0x0a2f] has been reserved [ 0.299485] pnp 00:01: [dma 0 disabled] system 00:02: [io 0x0680-0x069f] has been reserved [ 0.299837] system 00:02: [io 0xffff] has been reserved [ 0.299839] system 00:02: [io 0xffff] has been reserved [ 0.299841] system 00:02: [io 0xffff] has been reserved [ 0.299842] system 00:02: [io 0x1800-0x18fe] has been reserved [ 0.299844] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.299941] system 00:03: [io 0x0800-0x087f] has been reserved [ 0.300001] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.300287] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.300290] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.300292] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.300294] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.300295] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.300297] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.300299] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.300300] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.300302] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.300304] system 00:06: [mem 0xf7fe0000-0xf7ffffff] has been reserved [ 0.300350] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.300352] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.300354] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.300356] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.300357] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.300359] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.300361] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.300702] system 00:08: [io 0xff00-0xfffe] has been reserved [ 0.302102] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 0.302104] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 0.302106] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved [ 0.303193] pnp: PnP ACPI: found 10 devices [ 0.308953] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.309024] NET: Registered PF_INET protocol family [ 0.309142] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.326485] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.326517] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.326580] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.326759] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.326963] TCP: Hash tables configured (established 131072 bind 65536) [ 0.327041] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.327086] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.327119] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.327187] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.327196] NET: Registered PF_XDP protocol family [ 0.327208] pci 0000:00:1b.0: PCI bridge to [bus 01] pci 0000:00:1b.0: bridge window [mem 0xf7100000-0xf71fffff] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [mem 0xf7000000-0xf70fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000effff window] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xf7ffffff window] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff] PCI: CLS 64 bytes, default 64 [ 0.327862] pci 0000:00:1f.1: [8086:a2a0] type 00 class 0x058000 conventional PCI endpoint [ 0.328012] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit] DMAR: No ATSR found [ 0.328159] DMAR: No SATC found [ 0.328164] DMAR: IOMMU feature fl1gp_support inconsistent [ 0.328168] DMAR: IOMMU feature pgsel_inv inconsistent [ 0.328169] DMAR: IOMMU feature nwfs inconsistent [ 0.328170] DMAR: IOMMU feature pasid inconsistent [ 0.328171] DMAR: IOMMU feature eafs inconsistent [ 0.328172] DMAR: IOMMU feature prs inconsistent [ 0.328173] DMAR: IOMMU feature nest inconsistent [ 0.328174] DMAR: IOMMU feature mts inconsistent [ 0.328175] DMAR: IOMMU feature sc_support inconsistent [ 0.328176] DMAR: IOMMU feature dev_iotlb_support inconsistent [ 0.328177] DMAR: dmar0: Using Queued invalidation [ 0.328183] DMAR: dmar1: Using Queued invalidation [ 0.328208] Trying to unpack rootfs image as initramfs... [ 0.328418] pci 0000:00:02.0: Adding to iommu group 0 [ 0.328899] pci 0000:00:00.0: Adding to iommu group 1 [ 0.328918] pci 0000:00:14.0: Adding to iommu group 2 [ 0.328928] pci 0000:00:14.2: Adding to iommu group 2 [ 0.328943] pci 0000:00:16.0: Adding to iommu group 3 [ 0.328954] pci 0000:00:17.0: Adding to iommu group 4 [ 0.328968] pci 0000:00:1b.0: Adding to iommu group 5 [ 0.328980] pci 0000:00:1c.0: Adding to iommu group 6 [ 0.329005] pci 0000:00:1f.0: Adding to iommu group 7 [ 0.329016] pci 0000:00:1f.2: Adding to iommu group 7 [ 0.329026] pci 0000:00:1f.3: Adding to iommu group 7 [ 0.329036] pci 0000:00:1f.4: Adding to iommu group 7 [ 0.329047] pci 0000:00:1f.6: Adding to iommu group 8 [ 0.329061] pci 0000:01:00.0: Adding to iommu group 9 [ 0.329075] pci 0000:02:00.0: Adding to iommu group 10 [ 0.329911] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.329915] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.329917] software IO TLB: mapped [mem 0x00000000cddb3000-0x00000000d1db3000] (64MB) [ 0.330667] Initialise system trusted keyrings [ 0.330677] Key type blacklist registered [ 0.330720] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.330739] zbud: loaded [ 0.331067] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.331179] fuse: init (API version 7.39) [ 0.331310] integrity: Platform Keyring initialized [ 0.331316] integrity: Machine keyring initialized [ 0.350074] Key type asymmetric registered [ 0.350079] Asymmetric key parser 'x509' registered [ 0.350105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.350171] io scheduler mq-deadline registered [ 0.351999] pcieport 0000:00:1b.0: PME: Signaling with IRQ 122 [ 0.352097] pcieport 0000:00:1b.0: AER: enabled with IRQ 122 [ 0.352429] pcieport 0000:00:1c.0: PME: Signaling with IRQ 123 [ 0.352496] pcieport 0000:00:1c.0: AER: enabled with IRQ 123 [ 0.352615] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.353191] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.353220] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.353281] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.353364] ACPI: button: Power Button [PWRF] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.375259] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.379547] Linux agpgart interface v0.103 [ 0.383687] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 16) [ 0.410816] loop: module loaded [ 0.411026] ACPI: bus type drm_connector registered [ 0.412832] tun: Universal TUN/TAP device driver, 1.6 [ 0.412890] PPP generic driver version 2.4.2 [ 0.412959] i8042: PNP: No PS/2 controller found. [ 0.413013] mousedev: PS/2 mouse device common for all mice [ 0.413115] rtc_cmos 00:04: RTC can wake from S4 [ 0.413803] rtc_cmos 00:04: registered as rtc0 [ 0.413932] rtc_cmos 00:04: setting system clock to 2025-06-18T17:46:52 UTC (1750268812) [ 0.413962] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram [ 0.413972] i2c_dev: i2c /dev entries driver [ 0.414799] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.414821] device-mapper: uevent: version 1.0.3 [ 0.414871] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 0.414897] platform eisa.0: Probing EISA bus 0 [ 0.414899] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.414901] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.414902] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.414904] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.414905] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.414906] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.414907] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.414909] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.414910] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.414911] platform eisa.0: EISA: Detected 0 cards [ 0.414914] intel_pstate: Intel P-state driver initializing [ 0.415053] intel_pstate: Disabling energy efficiency optimization [ 0.415054] intel_pstate: HWP enabled [ 0.415082] ledtrig-cpu: registered to indicate activity on CPUs [ 0.415246] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 0.415440] fbcon: Deferring console take-over [ 0.415443] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 0.415537] drop_monitor: Initializing network drop monitor service [ 0.415639] NET: Registered PF_INET6 protocol family [ 0.741441] Freeing initrd memory: 72776K [ 0.748536] Segment Routing with IPv6 [ 0.748550] In-situ OAM (IOAM) with IPv6 [ 0.748580] NET: Registered PF_PACKET protocol family [ 0.748601] Bridge firewalling registered [ 0.748663] Key type dns_resolver registered [ 0.749058] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.749122] microcode: Current revision: 0x000000f8 [ 0.749124] microcode: Updated early from: 0x000000c6 [ 0.749244] IPI shorthand broadcast: enabled [ 0.750960] sched_clock: Marking stable (747001109, 3511280)->(766678590, -16166201) [ 0.751120] registered taskstats version 1 [ 0.751283] Loading compiled-in X.509 certificates [ 0.751786] Loaded X.509 cert 'Build time autogenerated kernel key: cf7d00930764d73252c988c9b037b32a1857ceb0' [ 0.755519] Key type .fscrypt registered [ 0.755521] Key type fscrypt-provisioning registered [ 0.755564] Key type trusted registered [ 0.772682] Key type encrypted registered [ 0.772687] AppArmor: AppArmor sha256 policy hashing enabled [ 0.774291] integrity: Loading X.509 certificate: UEFI:db [ 0.774324] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.774326] integrity: Loading X.509 certificate: UEFI:db [ 0.774342] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.774343] integrity: Loading X.509 certificate: UEFI:db [ 0.774354] integrity: Loaded X.509 cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' [ 0.774355] integrity: Loading X.509 certificate: UEFI:db [ 0.774554] integrity: Loaded X.509 cert 'Trust - Lenovo Certificate: bc19ccf68446c18b4a08dce9b1cb4deb' [ 0.776704] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 0.777148] integrity: Loaded X.509 cert 'Proxmox Server Solutions GmbH: Secure Boot CA: b5f1b11e482db5869329cb975aa35205f872cd7a' [ 0.777153] Loading compiled-in module X.509 certificates [ 0.777644] Loaded X.509 cert 'Build time autogenerated kernel key: cf7d00930764d73252c988c9b037b32a1857ceb0' [ 0.777647] ima: Allocated hash algorithm: sha256 [ 0.823579] evm: Initialising EVM extended attributes: [ 0.823582] evm: security.selinux [ 0.823583] evm: security.SMACK64 [ 0.823584] evm: security.SMACK64EXEC [ 0.823585] evm: security.SMACK64TRANSMUTE [ 0.823586] evm: security.SMACK64MMAP [ 0.823587] evm: security.apparmor [ 0.823588] evm: security.ima [ 0.823588] evm: security.capability [ 0.823589] evm: HMAC attrs: 0x1 [ 0.823951] PM: Magic number: 13:392:795 [ 0.823978] tpm_tis MSFT0101:00: hash matches [ 0.823984] acpi MSFT0101:00: hash matches [ 0.829149] RAS: Correctable Errors collector initialized. [ 0.829199] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7 [ 0.829221] clk: Disabling unused clocks [ 0.830196] Freeing unused decrypted memory: 2028K [ 0.830602] Freeing unused kernel image (initmem) memory: 4816K [ 0.830652] Write protecting the kernel read-only data: 34816k [ 0.831070] Freeing unused kernel image (rodata/data gap) memory: 868K [ 0.877031] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.877033] x86/mm: Checking user space page tables [ 0.921259] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.921263] Run /init as init process [ 0.921264] with arguments: [ 0.921266] /init [ 0.921267] with environment: [ 0.921268] HOME=/ [ 0.921269] TERM=linux [ 0.921269] BOOT_IMAGE=/boot/vmlinuz-6.8.12-11-pve [ 1.136578] e1000e: Intel(R) PRO/1000 Network Driver [ 1.136581] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.136793] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.160787] ahci 0000:00:17.0: version 3.0 [ 1.161047] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.161051] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 1.174643] i801_smbus 0000:00:1f.4: enabling device (0001 -> 0003) [ 1.174823] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.174856] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.177111] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 1.177188] scsi host0: ahci [ 1.177343] scsi host1: ahci [ 1.177462] scsi host2: ahci [ 1.177464] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.177586] scsi host3: ahci [ 1.177718] scsi host4: ahci [ 1.177857] scsi host5: ahci [ 1.177915] ata1: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b100 irq 125 lpm-pol 0 [ 1.177919] ata2: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b180 irq 125 lpm-pol 0 [ 1.177922] ata3: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b200 irq 125 lpm-pol 0 [ 1.177925] ata4: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b280 irq 125 lpm-pol 0 [ 1.177928] ata5: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b300 irq 125 lpm-pol 0 [ 1.177931] ata6: SATA max UDMA/133 abar m2048@0xf724b000 port 0xf724b380 irq 125 lpm-pol 0 [ 1.181628] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.181635] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.182971] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.183401] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.183405] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.183408] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.183445] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08 [ 1.183447] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.183449] usb usb1: Product: xHCI Host Controller [ 1.183450] usb usb1: Manufacturer: Linux 6.8.12-11-pve xhci-hcd [ 1.183452] usb usb1: SerialNumber: ... [ 1.183635] hub 1-0:1.0: USB hub found [ 1.183667] hub 1-0:1.0: 12 ports detected [ 1.185859] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.08 [ 1.185862] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.185864] usb usb2: Product: xHCI Host Controller [ 1.185865] usb usb2: Manufacturer: Linux 6.8.12-11-pve xhci-hcd [ 1.185866] usb usb2: SerialNumber: ... [ 1.186009] hub 2-0:1.0: USB hub found [ 1.186029] hub 2-0:1.0: 6 ports detected [ 1.190167] nvme nvme0: pci function 0000:01:00.0 [ 1.202129] nvme nvme0: 4/0/0 default/read/poll queues [ 1.207703] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.222200] nvme0n1: p1 p2 p3 [ 1.270068] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 16FB89ED9060B82D96718629B031B655 [ 1.270073] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.270133] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 1.340790] tsc: Refined TSC clocksource calibration: 3407.963 MHz [ 1.340796] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fb1a1880, max_idle_ns: 440795374334 ns [ 1.340835] clocksource: Switched to clocksource tsc [ 1.422767] usb 1-3: new full-speed USB device number 2 using xhci_hcd [ 1.486230] ata2: SATA link down (SStatus 4 SControl 300) [ 1.486253] ata5: SATA link down (SStatus 4 SControl 300) [ 1.486269] ata6: SATA link down (SStatus 4 SControl 300) [ 1.486294] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.487020] ata1.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.487025] ata1.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.487244] ata1.00: ATA-11: PNY CS900 120GB SSD, CS900613, max UDMA/133 [ 1.487268] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.488046] ata1.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(SECURITY FREEZE LOCK) filtered out [ 1.488051] ata1.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(DEVICE CONFIGURATION OVERLAY) filtered out [ 1.488395] ata1.00: configured for UDMA/133 [ 1.488509] scsi 0:0:0:0: Direct-Access ATA PNY CS900 120GB 0613 PQ: 0 ANSI: 5 [ 1.488754] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.488777] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 1.488788] sd 0:0:0:0: [sda] Write Protect is off [ 1.488791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.488820] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.488838] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.490715] sda: sda1 sda9 [ 1.490947] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.493801] ata3: SATA link down (SStatus 4 SControl 300) [ 1.493823] ata4: SATA link down (SStatus 4 SControl 300) [ 1.505560] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 1.550605] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10 [ 1.550612] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.666553] usb 1-5: new full-speed USB device number 3 using xhci_hcd [ 1.795423] usb 1-5: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 [ 1.795427] usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=... [ 1.795429] usb 1-5: Product: BT DONGLE10 [ 1.911782] usb 1-6: new full-speed USB device number 4 using xhci_hcd [ 2.041244] usb 1-6: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00 [ 2.041249] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.041251] usb 1-6: Product: Sonoff Zigbee 3.0 USB Dongle Plus [ 2.041253] usb 1-6: Manufacturer: ITead [ 2.041254] usb 1-6: SerialNumber: ... [ 2.070529] fbcon: Taking over console [ 2.071495] Console: switching to colour frame buffer device 100x37 [ 2.141512] raid6: avx2x4 gen() 37611 MB/s [ 2.158513] raid6: avx2x2 gen() 38077 MB/s [ 2.175513] raid6: avx2x1 gen() 28905 MB/s [ 2.175514] raid6: using algorithm avx2x2 gen() 38077 MB/s [ 2.192512] raid6: .... xor() 21031 MB/s, rmw enabled [ 2.192513] raid6: using avx2x2 recovery algorithm [ 2.199410] xor: automatically using best checksumming function avx [ 2.326725] Btrfs loaded, zoned=yes, fsverity=yes [ 2.406819] EXT4-fs (dm-1): mounted filesystem HASH_AFF-57C2-D407-DF08-11779CEC8EF3 ro with ordered data mode. Quota mode: none. [ 2.933888] pstore: Using crash dump compression: deflate [ 2.968794] EXT4-fs (dm-1): re-mounted HASH_AFF-57C2-D407-DF08-11779CEC8EF3 r/w. Quota mode: none. [ 3.032084] pstore: Registered efi_pstore as persistent store backend [ 3.055095] spl: loading out-of-tree module taints kernel. [ 3.165811] zfs: module license 'CDDL' taints kernel. [ 3.165815] Disabling lock debugging due to kernel taint [ 3.165835] zfs: module license taints kernel. [ 3.360894] Adding 8019964k swap on /dev/mapper/XXXXXXXXX Priority:-2 extents:1 across:8019964k SS [ 3.932976] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.933213] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 3.933435] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 3.934329] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.937724] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.937828] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.938234] usbcore: registered new interface driver usbserial_generic [ 3.938249] usbserial: USB Serial support registered for generic [ 3.938758] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.938764] cfg80211: failed to load regulatory.db [ 3.956238] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 3.992240] usbcore: registered new interface driver cp210x [ 3.992258] usbserial: USB Serial support registered for cp210x [ 3.992284] cp210x 1-6:1.0: cp210x converter detected [ 3.996666] usb 1-6: cp210x converter now attached to ttyUSB0 [ 4.138933] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 4.216580] Intel(R) Wireless WiFi driver for Linux [ 4.216663] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002) [ 4.220254] iwlwifi 0000:02:00.0: Detected crf-id 0xbadcafe, cnv-id 0x10 wfpm id 0x80000000 [ 4.220277] iwlwifi 0000:02:00.0: PCI dev 24fd/1010, rev=0x230, rfid=0xd55555d5 [ 4.279448] Bluetooth: Core ver 2.22 [ 4.279468] NET: Registered PF_BLUETOOTH protocol family [ 4.279469] Bluetooth: HCI device and connection manager initialized [ 4.279474] Bluetooth: HCI socket layer initialized [ 4.279476] Bluetooth: L2CAP socket layer initialized [ 4.279480] Bluetooth: SCO socket layer initialized [ 4.287076] resource: resource sanity check: requesting [mem 0x00000000fdffe800-0x00000000fe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff] caller get_primary_reg_base+0x4f/0xb0 [intel_pmc_core] mapping multiple BARs [ 4.287115] intel_pmc_core INT33A1:00: initialized [ 4.310660] iwlwifi 0000:02:00.0: loaded firmware version 36.ca7b901d.0 8265-36.ucode op_mode iwlmvm [ 4.581926] usbcore: registered new interface driver btusb [ 4.582427] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015 [ 4.583415] Bluetooth: hci0: Device revision is 16 [ 4.583418] Bluetooth: hci0: Secure boot is enabled [ 4.583420] Bluetooth: hci0: OTP lock is enabled [ 4.583421] Bluetooth: hci0: API lock is enabled [ 4.583423] Bluetooth: hci0: Debug lock is disabled [ 4.583424] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 4.588460] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=10 rev=0201 [ 4.588466] Bluetooth: hci1: LMP ver=10 subver=0201; manufacturer=10 [ 4.588469] Bluetooth: hci1: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once... [ 4.631073] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi [ 4.635979] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 4.635983] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.635984] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.635986] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.635987] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.924677] Bluetooth: hci1: HCI Delete Stored Link Key command is advertised, but not supported. [ 4.924682] Bluetooth: hci1: HCI Read Default Erroneous Data Reporting command is advertised, but not supported. [ 4.924684] Bluetooth: hci1: HCI Set Event Filter command not supported. [ 5.139530] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 5.140781] cryptd: max_cpu_qlen set to 1000 [ 5.141750] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230 [ 5.141849] thermal thermal_zone0: failed to read out thermal zone (-61) [ 5.142415] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 5.145590] Console: switching to colour dummy device 80x25 [ 5.169874] AVX2 version of gcm_enc/dec engaged. [ 5.169911] AES CTR mode by8 optimization enabled [ 5.200194] iwlwifi 0000:02:00.0: base HW address: 80519CEE7AD77F49CDE4BE88F16D9BCE, OTP minor version: 0x4 [ 5.290940] i915 0000:00:02.0: vgaarb: deactivate vga console [ 5.291007] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 5.292507] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.293460] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 5.293614] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 5.298467] ZFS: Loaded module v2.2.7-pve2, ZFS pool version 5000, ZFS filesystem version 5 [ 5.301625] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.368576] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 [ 5.411528] thermal thermal_zone0: failed to read out thermal zone (-61) [ 5.426911] intel_tcc_cooling: Programmable TCC Offset detected [ 5.479972] intel_rapl_common: Found RAPL domain package [ 5.479976] intel_rapl_common: Found RAPL domain core [ 5.479978] intel_rapl_common: Found RAPL domain uncore [ 5.479979] intel_rapl_common: Found RAPL domain dram [ 5.621518] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP [ 5.621708] i915 0000:00:02.0: [drm] [ENCODER:94:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 5.621713] i915 0000:00:02.0: [drm] [ENCODER:121:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it [ 5.659048] [drm] Initialized i915 1.6.0 20230929 for 0000:00:02.0 on minor 1 [ 5.662023] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.662426] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 [ 5.662607] i915 display info: display version: 9 [ 5.662610] i915 display info: cursor_needs_physical: no [ 5.662612] i915 display info: has_cdclk_crawl: no [ 5.662614] i915 display info: has_cdclk_squash: no [ 5.662615] i915 display info: has_ddi: yes [ 5.662617] i915 display info: has_dp_mst: yes [ 5.662619] i915 display info: has_dsb: no [ 5.662620] i915 display info: has_fpga_dbg: yes [ 5.662621] i915 display info: has_gmch: no [ 5.662623] i915 display info: has_hotplug: yes [ 5.662624] i915 display info: has_hti: no [ 5.662626] i915 display info: has_ipc: yes [ 5.662627] i915 display info: has_overlay: no [ 5.662628] i915 display info: has_psr: yes [ 5.662630] i915 display info: has_psr_hw_tracking: yes [ 5.662631] i915 display info: overlay_needs_physical: no [ 5.662633] i915 display info: supports_tv: no [ 5.662634] i915 display info: has_hdcp: yes [ 5.662636] i915 display info: has_dmc: yes [ 5.662637] i915 display info: has_dsc: no [ 5.662638] i915 display info: rawclk rate: 24000 kHz [ 5.662698] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.674487] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 5.687651] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 5.698162] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 5.715839] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC294: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.715844] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.715846] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.715848] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.715850] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.715851] snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a [ 5.715853] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 6.046787] Bluetooth: hci0: Waiting for firmware download to complete [ 6.047426] Bluetooth: hci0: Firmware loaded in 1383152 usecs [ 6.047546] Bluetooth: hci0: Waiting for device to boot [ 6.060679] Bluetooth: hci0: Device booted in 12882 usecs [ 6.067702] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc [ 6.070566] Bluetooth: hci0: Applying Intel DDC parameters completed [ 6.071561] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021 [ 6.073565] Bluetooth: hci0: Reading supported features failed (-16) [ 6.073568] Bluetooth: hci0: Error reading debug features [ 6.073569] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 6.242057] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 [ 6.242126] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 [ 6.242188] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 [ 6.242247] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 [ 6.242305] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 [ 6.245107] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 6.615938] RPC: Registered named UNIX socket transport module. [ 6.615943] RPC: Registered udp transport module. [ 6.615944] RPC: Registered tcp transport module. [ 6.615945] RPC: Registered tcp-with-tls transport module. [ 6.615946] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.316057] vmbr0: port 1(enp0s31f6) entered blocking state [ 7.316062] vmbr0: port 1(enp0s31f6) entered disabled state [ 7.316074] e1000e 0000:00:1f.6 enp0s31f6: entered allmulticast mode [ 7.316115] e1000e 0000:00:1f.6 enp0s31f6: entered promiscuous mode [ 9.309334] sctp: Hash tables configured (bind 256/256) [ 11.019067] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 11.019124] vmbr0: port 1(enp0s31f6) entered blocking state [ 11.019128] vmbr0: port 1(enp0s31f6) entered forwarding state [ 17.315643] kvm_intel: L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. [ 17.934284] tap100i0: entered promiscuous mode [ 17.953307] vmbr0: port 2(tap100i0) entered blocking state [ 17.953311] vmbr0: port 2(tap100i0) entered disabled state [ 17.953327] tap100i0: entered allmulticast mode [ 17.953393] vmbr0: port 2(tap100i0) entered blocking state [ 17.953395] vmbr0: port 2(tap100i0) entered forwarding state [ 18.038070] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 18.038150] cp210x 1-6:1.0: device disconnected [ 24.414584] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 24.907954] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 25.341992] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 530.815698] tap100i0: left allmulticast mode [ 530.815717] vmbr0: port 2(tap100i0) entered disabled state [ 530.957683] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 531.086139] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021 [ 531.089148] Bluetooth: hci0: Reading supported features failed (-16) [ 531.089153] Bluetooth: hci0: Error reading debug features [ 531.089156] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 531.199683] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 531.332187] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=10 rev=0201 [ 531.332193] Bluetooth: hci1: LMP ver=10 subver=0201; manufacturer=10 [ 531.332194] Bluetooth: hci1: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once... [ 531.440681] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 531.567694] cp210x 1-6:1.0: cp210x converter detected [ 531.569545] usb 1-6: cp210x converter now attached to ttyUSB0 [ 531.655704] Bluetooth: hci1: HCI Delete Stored Link Key command is advertised, but not supported. [ 531.655709] Bluetooth: hci1: HCI Read Default Erroneous Data Reporting command is advertised, but not supported. [ 531.655710] Bluetooth: hci1: HCI Set Event Filter command not supported. [ 531.948738] VFIO - User Level meta-driver version: 0.3 [ 532.079786] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 532.989828] tap100i0: entered promiscuous mode [ 533.009300] vmbr0: port 2(tap100i0) entered blocking state [ 533.009304] vmbr0: port 2(tap100i0) entered disabled state [ 533.009321] tap100i0: entered allmulticast mode [ 533.009387] vmbr0: port 2(tap100i0) entered blocking state [ 533.009397] vmbr0: port 2(tap100i0) entered forwarding state [ 533.633361] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 533.889700] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 533.889772] cp210x 1-6:1.0: device disconnected [ 540.023096] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 540.515862] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 540.944176] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 772.538922] tap100i1: entered promiscuous mode [ 772.608001] vmbr0: port 3(fwpr100p1) entered blocking state [ 772.608007] vmbr0: port 3(fwpr100p1) entered disabled state [ 772.608025] fwpr100p1: entered allmulticast mode [ 772.608064] fwpr100p1: entered promiscuous mode [ 772.608095] vmbr0: port 3(fwpr100p1) entered blocking state [ 772.608097] vmbr0: port 3(fwpr100p1) entered forwarding state [ 772.618066] fwbr100i1: port 1(fwln100i1) entered blocking state [ 772.618071] fwbr100i1: port 1(fwln100i1) entered disabled state [ 772.618089] fwln100i1: entered allmulticast mode [ 772.618127] fwln100i1: entered promiscuous mode [ 772.618159] fwbr100i1: port 1(fwln100i1) entered blocking state [ 772.618161] fwbr100i1: port 1(fwln100i1) entered forwarding state [ 772.628443] fwbr100i1: port 2(tap100i1) entered blocking state [ 772.628448] fwbr100i1: port 2(tap100i1) entered disabled state [ 772.628459] tap100i1: entered allmulticast mode [ 772.628514] fwbr100i1: port 2(tap100i1) entered blocking state [ 772.628516] fwbr100i1: port 2(tap100i1) entered forwarding state [ 798.904472] tap100i0: left allmulticast mode [ 798.904489] vmbr0: port 2(tap100i0) entered disabled state [ 799.110750] tap100i1: left allmulticast mode [ 799.110767] fwbr100i1: port 2(tap100i1) entered disabled state [ 799.122595] fwbr100i1: port 1(fwln100i1) entered disabled state [ 799.122631] vmbr0: port 3(fwpr100p1) entered disabled state [ 799.122694] fwln100i1 (unregistering): left allmulticast mode [ 799.122697] fwln100i1 (unregistering): left promiscuous mode [ 799.122699] fwbr100i1: port 1(fwln100i1) entered disabled state [ 799.134728] fwpr100p1 (unregistering): left allmulticast mode [ 799.134732] fwpr100p1 (unregistering): left promiscuous mode [ 799.134735] vmbr0: port 3(fwpr100p1) entered disabled state [ 799.312721] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 799.441075] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021 [ 799.444052] Bluetooth: hci0: Reading supported features failed (-16) [ 799.444057] Bluetooth: hci0: Error reading debug features [ 799.444060] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 799.554731] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 799.684283] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=10 rev=0201 [ 799.684289] Bluetooth: hci1: LMP ver=10 subver=0201; manufacturer=10 [ 799.684292] Bluetooth: hci1: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once... [ 799.795683] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 799.922833] cp210x 1-6:1.0: cp210x converter detected [ 799.924580] usb 1-6: cp210x converter now attached to ttyUSB0 [ 800.009902] Bluetooth: hci1: HCI Delete Stored Link Key command is advertised, but not supported. [ 800.009905] Bluetooth: hci1: HCI Read Default Erroneous Data Reporting command is advertised, but not supported. [ 800.009907] Bluetooth: hci1: HCI Set Event Filter command not supported. [ 800.287574] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 801.203890] tap100i0: entered promiscuous mode [ 801.224112] vmbr0: port 2(tap100i0) entered blocking state [ 801.224117] vmbr0: port 2(tap100i0) entered disabled state [ 801.224134] tap100i0: entered allmulticast mode [ 801.224198] vmbr0: port 2(tap100i0) entered blocking state [ 801.224201] vmbr0: port 2(tap100i0) entered forwarding state [ 801.875359] tap100i1: entered promiscuous mode [ 801.927313] vmbr0: port 3(fwpr100p1) entered blocking state [ 801.927318] vmbr0: port 3(fwpr100p1) entered disabled state [ 801.927336] fwpr100p1: entered allmulticast mode [ 801.927374] fwpr100p1: entered promiscuous mode [ 801.927415] vmbr0: port 3(fwpr100p1) entered blocking state [ 801.927418] vmbr0: port 3(fwpr100p1) entered forwarding state [ 801.937990] fwbr100i1: port 1(fwln100i1) entered blocking state [ 801.937996] fwbr100i1: port 1(fwln100i1) entered disabled state [ 801.938009] fwln100i1: entered allmulticast mode [ 801.938047] fwln100i1: entered promiscuous mode [ 801.938077] fwbr100i1: port 1(fwln100i1) entered blocking state [ 801.938079] fwbr100i1: port 1(fwln100i1) entered forwarding state [ 801.948038] fwbr100i1: port 2(tap100i1) entered blocking state [ 801.948043] fwbr100i1: port 2(tap100i1) entered disabled state [ 801.948056] tap100i1: entered allmulticast mode [ 801.948121] fwbr100i1: port 2(tap100i1) entered blocking state [ 801.948124] fwbr100i1: port 2(tap100i1) entered forwarding state [ 802.580364] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 802.835645] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 802.835712] cp210x 1-6:1.0: device disconnected [ 809.019941] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 809.508750] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 809.944152] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 898.831516] tap100i0: left allmulticast mode [ 898.831534] vmbr0: port 2(tap100i0) entered disabled state [ 899.043474] tap100i1: left allmulticast mode [ 899.043492] fwbr100i1: port 2(tap100i1) entered disabled state [ 899.055798] fwbr100i1: port 1(fwln100i1) entered disabled state [ 899.055846] vmbr0: port 3(fwpr100p1) entered disabled state [ 899.055913] fwln100i1 (unregistering): left allmulticast mode [ 899.055915] fwln100i1 (unregistering): left promiscuous mode [ 899.055917] fwbr100i1: port 1(fwln100i1) entered disabled state [ 899.066840] fwpr100p1 (unregistering): left allmulticast mode [ 899.066845] fwpr100p1 (unregistering): left promiscuous mode [ 899.066848] vmbr0: port 3(fwpr100p1) entered disabled state [ 899.253798] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 899.382161] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021 [ 899.385159] Bluetooth: hci0: Reading supported features failed (-16) [ 899.385164] Bluetooth: hci0: Error reading debug features [ 899.385168] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 899.494798] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 899.626158] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=10 rev=0201 [ 899.626164] Bluetooth: hci1: LMP ver=10 subver=0201; manufacturer=10 [ 899.626167] Bluetooth: hci1: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once... [ 899.735690] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 899.862933] cp210x 1-6:1.0: cp210x converter detected [ 899.864862] usb 1-6: cp210x converter now attached to ttyUSB0 [ 899.950116] Bluetooth: hci1: HCI Delete Stored Link Key command is advertised, but not supported. [ 899.950120] Bluetooth: hci1: HCI Read Default Erroneous Data Reporting command is advertised, but not supported. [ 899.950122] Bluetooth: hci1: HCI Set Event Filter command not supported. [ 901.025057] tap100i0: entered promiscuous mode [ 901.044481] vmbr0: port 2(tap100i0) entered blocking state [ 901.044488] vmbr0: port 2(tap100i0) entered disabled state [ 901.044508] tap100i0: entered allmulticast mode [ 901.044583] vmbr0: port 2(tap100i0) entered blocking state [ 901.044587] vmbr0: port 2(tap100i0) entered forwarding state [ 901.719211] tap100i1: entered promiscuous mode [ 901.768956] vmbr0: port 3(fwpr100p1) entered blocking state [ 901.768961] vmbr0: port 3(fwpr100p1) entered disabled state [ 901.768974] fwpr100p1: entered allmulticast mode [ 901.769011] fwpr100p1: entered promiscuous mode [ 901.769038] vmbr0: port 3(fwpr100p1) entered blocking state [ 901.769040] vmbr0: port 3(fwpr100p1) entered forwarding state [ 901.778618] fwbr100i1: port 1(fwln100i1) entered blocking state [ 901.778623] fwbr100i1: port 1(fwln100i1) entered disabled state [ 901.778641] fwln100i1: entered allmulticast mode [ 901.778679] fwln100i1: entered promiscuous mode [ 901.778711] fwbr100i1: port 1(fwln100i1) entered blocking state [ 901.778713] fwbr100i1: port 1(fwln100i1) entered forwarding state [ 901.788334] fwbr100i1: port 2(tap100i1) entered blocking state [ 901.788339] fwbr100i1: port 2(tap100i1) entered disabled state [ 901.788351] tap100i1: entered allmulticast mode [ 901.788412] fwbr100i1: port 2(tap100i1) entered blocking state [ 901.788414] fwbr100i1: port 2(tap100i1) entered forwarding state [ 901.870183] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 901.870287] cp210x 1-6:1.0: device disconnected [ 908.098730] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 908.591035] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 909.017773] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 965.307678] tap100i0: left allmulticast mode [ 965.307711] vmbr0: port 2(tap100i0) entered disabled state [ 965.516363] tap100i1: left allmulticast mode [ 965.516382] fwbr100i1: port 2(tap100i1) entered disabled state [ 965.529086] fwbr100i1: port 1(fwln100i1) entered disabled state [ 965.529135] vmbr0: port 3(fwpr100p1) entered disabled state [ 965.529207] fwln100i1 (unregistering): left allmulticast mode [ 965.529210] fwln100i1 (unregistering): left promiscuous mode [ 965.529212] fwbr100i1: port 1(fwln100i1) entered disabled state [ 965.541094] fwpr100p1 (unregistering): left allmulticast mode [ 965.541099] fwpr100p1 (unregistering): left promiscuous mode [ 965.541102] vmbr0: port 3(fwpr100p1) entered disabled state [ 965.714011] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 965.841865] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021 [ 965.844864] Bluetooth: hci0: Reading supported features failed (-16) [ 965.844870] Bluetooth: hci0: Error reading debug features [ 965.844873] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 965.956021] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 966.087885] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=10 rev=0201 [ 966.087891] Bluetooth: hci1: LMP ver=10 subver=0201; manufacturer=10 [ 966.087893] Bluetooth: hci1: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once... [ 966.196942] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 966.325149] cp210x 1-6:1.0: cp210x converter detected [ 966.326983] usb 1-6: cp210x converter now attached to ttyUSB0 [ 966.414158] Bluetooth: hci1: HCI Delete Stored Link Key command is advertised, but not supported. [ 966.414161] Bluetooth: hci1: HCI Read Default Erroneous Data Reporting command is advertised, but not supported. [ 966.414163] Bluetooth: hci1: HCI Set Event Filter command not supported. [ 966.703885] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 967.606250] tap100i0: entered promiscuous mode [ 967.625547] vmbr0: port 2(tap100i0) entered blocking state [ 967.625552] vmbr0: port 2(tap100i0) entered disabled state [ 967.625569] tap100i0: entered allmulticast mode [ 967.625636] vmbr0: port 2(tap100i0) entered blocking state [ 967.625638] vmbr0: port 2(tap100i0) entered forwarding state [ 968.258563] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 968.511889] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 968.511980] cp210x 1-6:1.0: device disconnected [ 968.512759] Bluetooth: hci1: urb 000000001a81c5e7 failed to resubmit (2) [ 974.691415] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 975.182435] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 975.622428] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 1525.574799] zd16: p1 p2 [ 1798.874031] zd16: p1 p2 [ 1803.336912] tap105i0: entered promiscuous mode [ 1803.394969] 8021q: 802.1Q VLAN Support v1.8 [ 1803.410799] vmbr0v999: port 1(enp0s31f6.999) entered blocking state [ 1803.410804] vmbr0v999: port 1(enp0s31f6.999) entered disabled state [ 1803.410816] enp0s31f6.999: entered allmulticast mode [ 1803.410864] enp0s31f6.999: entered promiscuous mode [ 1803.415810] vmbr0v999: port 1(enp0s31f6.999) entered blocking state [ 1803.415815] vmbr0v999: port 1(enp0s31f6.999) entered forwarding state [ 1803.425913] vmbr0v999: port 2(tap105i0) entered blocking state [ 1803.425918] vmbr0v999: port 2(tap105i0) entered disabled state [ 1803.425925] tap105i0: entered allmulticast mode [ 1803.425987] vmbr0v999: port 2(tap105i0) entered blocking state [ 1803.425989] vmbr0v999: port 2(tap105i0) entered forwarding state [ 1804.087202] tap105i1: entered promiscuous mode [ 1804.106733] vmbr0: port 3(tap105i1) entered blocking state [ 1804.106738] vmbr0: port 3(tap105i1) entered disabled state [ 1804.106755] tap105i1: entered allmulticast mode [ 1804.106815] vmbr0: port 3(tap105i1) entered blocking state [ 1804.106817] vmbr0: port 3(tap105i1) entered forwarding state [ 3073.519720] zd16: p1 p2 [ 3073.698525] tap105i0: left allmulticast mode [ 3073.698542] vmbr0v999: port 2(tap105i0) entered disabled state [ 3073.919014] tap105i1: left allmulticast mode [ 3073.919033] vmbr0: port 3(tap105i1) entered disabled state [ 3084.176101] tap100i0: left allmulticast mode [ 3084.176120] vmbr0: port 2(tap100i0) entered disabled state [ 3084.326191] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 3084.453884] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021 [ 3084.456860] Bluetooth: hci0: Reading supported features failed (-16) [ 3084.456865] Bluetooth: hci0: Error reading debug features [ 3084.456868] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 3084.568209] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 3084.697864] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=10 rev=0201 [ 3084.697870] Bluetooth: hci1: LMP ver=10 subver=0201; manufacturer=10 [ 3084.697872] Bluetooth: hci1: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once... [ 3084.809181] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 3084.936315] cp210x 1-6:1.0: cp210x converter detected [ 3084.938207] usb 1-6: cp210x converter now attached to ttyUSB0 [ 3085.021542] Bluetooth: hci1: HCI Delete Stored Link Key command is advertised, but not supported. [ 3085.021546] Bluetooth: hci1: HCI Read Default Erroneous Data Reporting command is advertised, but not supported. [ 3085.021547] Bluetooth: hci1: HCI Set Event Filter command not supported. [ 3114.341871] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 3115.268068] tap100i0: entered promiscuous mode [ 3115.289299] vmbr0: port 2(tap100i0) entered blocking state [ 3115.289304] vmbr0: port 2(tap100i0) entered disabled state [ 3115.289320] tap100i0: entered allmulticast mode [ 3115.289385] vmbr0: port 2(tap100i0) entered blocking state [ 3115.289387] vmbr0: port 2(tap100i0) entered forwarding state [ 3115.979042] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 3116.231073] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 3116.231142] cp210x 1-6:1.0: device disconnected [ 3116.412867] tap105i0: entered promiscuous mode [ 3116.461174] vmbr0v999: port 2(tap105i0) entered blocking state [ 3116.461181] vmbr0v999: port 2(tap105i0) entered disabled state [ 3116.461196] tap105i0: entered allmulticast mode [ 3116.461280] vmbr0v999: port 2(tap105i0) entered blocking state [ 3116.461283] vmbr0v999: port 2(tap105i0) entered forwarding state [ 3117.162479] tap105i1: entered promiscuous mode [ 3117.184133] vmbr0: port 3(tap105i1) entered blocking state [ 3117.184139] vmbr0: port 3(tap105i1) entered disabled state [ 3117.184151] tap105i1: entered allmulticast mode [ 3117.184205] vmbr0: port 3(tap105i1) entered blocking state [ 3117.184208] vmbr0: port 3(tap105i1) entered forwarding state [ 3122.685301] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 3123.177278] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 3123.618327] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 3419.601792] zd16: p1 p2 [ 3419.783412] tap105i0: left allmulticast mode [ 3419.783431] vmbr0v999: port 2(tap105i0) entered disabled state [ 3419.994556] tap105i1: left allmulticast mode [ 3419.994574] vmbr0: port 3(tap105i1) entered disabled state [ 3429.685697] tap100i0: left allmulticast mode [ 3429.685717] vmbr0: port 2(tap100i0) entered disabled state [ 3429.826382] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 3429.955639] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021 [ 3429.958625] Bluetooth: hci0: Reading supported features failed (-16) [ 3429.958630] Bluetooth: hci0: Error reading debug features [ 3429.958632] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [ 3430.067345] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 3430.196617] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=10 rev=0201 [ 3430.196622] Bluetooth: hci1: LMP ver=10 subver=0201; manufacturer=10 [ 3430.196625] Bluetooth: hci1: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once... [ 3430.308294] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 3430.435273] cp210x 1-6:1.0: cp210x converter detected [ 3430.437025] usb 1-6: cp210x converter now attached to ttyUSB0 [ 3430.526718] Bluetooth: hci1: HCI Delete Stored Link Key command is advertised, but not supported. [ 3430.526721] Bluetooth: hci1: HCI Read Default Erroneous Data Reporting command is advertised, but not supported. [ 3430.526723] Bluetooth: hci1: HCI Set Event Filter command not supported. [ 3431.601634] tap100i0: entered promiscuous mode [ 3431.621766] vmbr0: port 2(tap100i0) entered blocking state [ 3431.621771] vmbr0: port 2(tap100i0) entered disabled state [ 3431.621788] tap100i0: entered allmulticast mode [ 3431.621865] vmbr0: port 2(tap100i0) entered blocking state [ 3431.621869] vmbr0: port 2(tap100i0) entered forwarding state [ 3431.702046] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 3431.702166] cp210x 1-6:1.0: device disconnected [ 3437.874771] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [ 3438.365729] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 3438.801821] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [ 3546.468053] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 3611.932879] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 3612.787690] tap105i0: entered promiscuous mode [ 3612.826375] vmbr0v999: port 2(tap105i0) entered blocking state [ 3612.826380] vmbr0v999: port 2(tap105i0) entered disabled state [ 3612.826398] tap105i0: entered allmulticast mode [ 3612.826473] vmbr0v999: port 2(tap105i0) entered blocking state [ 3612.826476] vmbr0v999: port 2(tap105i0) entered forwarding state [ 3613.484642] tap105i1: entered promiscuous mode [ 3613.506489] vmbr0: port 3(tap105i1) entered blocking state [ 3613.506494] vmbr0: port 3(tap105i1) entered disabled state [ 3613.506512] tap105i1: entered allmulticast mode [ 3613.506568] vmbr0: port 3(tap105i1) entered blocking state [ 3613.506570] vmbr0: port 3(tap105i1) entered forwarding state [ 3613.594175] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [ 3666.463307] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 3786.493756] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 3906.487096] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 4197.937574] zd16: p1 p2 [ 4198.122110] tap105i0: left allmulticast mode [ 4198.122127] vmbr0v999: port 2(tap105i0) entered disabled state [ 4198.340373] tap105i1: left allmulticast mode [ 4198.340391] vmbr0: port 3(tap105i1) entered disabled state [ 4199.925255] tap105i0: entered promiscuous mode [ 4199.959952] vmbr0v999: port 2(tap105i0) entered blocking state [ 4199.959956] vmbr0v999: port 2(tap105i0) entered disabled state [ 4199.959974] tap105i0: entered allmulticast mode [ 4199.960039] vmbr0v999: port 2(tap105i0) entered blocking state [ 4199.960041] vmbr0v999: port 2(tap105i0) entered forwarding state [ 4200.635366] tap105i1: entered promiscuous mode [ 4200.655877] vmbr0: port 3(tap105i1) entered blocking state [ 4200.655882] vmbr0: port 3(tap105i1) entered disabled state [ 4200.655899] tap105i1: entered allmulticast mode [ 4200.655956] vmbr0: port 3(tap105i1) entered blocking state [ 4200.655958] vmbr0: port 3(tap105i1) entered forwarding state [ 4206.456044] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 4326.502584] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 4446.496996] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 4566.476296] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 4685.466868] zd16: p1 p2 [ 4685.649690] tap105i0: left allmulticast mode [ 4685.649707] vmbr0v999: port 2(tap105i0) entered disabled state [ 4685.867853] tap105i1: left allmulticast mode [ 4685.867870] vmbr0: port 3(tap105i1) entered disabled state [ 4686.466787] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 4687.499229] tap105i0: entered promiscuous mode [ 4687.536589] vmbr0v999: port 2(tap105i0) entered blocking state [ 4687.536594] vmbr0v999: port 2(tap105i0) entered disabled state [ 4687.536610] tap105i0: entered allmulticast mode [ 4687.536674] vmbr0v999: port 2(tap105i0) entered blocking state [ 4687.536677] vmbr0v999: port 2(tap105i0) entered forwarding state [ 4688.198647] tap105i1: entered promiscuous mode [ 4688.220396] vmbr0: port 3(tap105i1) entered blocking state [ 4688.220400] vmbr0: port 3(tap105i1) entered disabled state [ 4688.220418] tap105i1: entered allmulticast mode [ 4688.220488] vmbr0: port 3(tap105i1) entered blocking state [ 4688.220491] vmbr0: port 3(tap105i1) entered forwarding state [ 4806.816737] tap105i2: entered promiscuous mode [ 4806.840969] vmbr0: port 4(tap105i2) entered blocking state [ 4806.840976] vmbr0: port 4(tap105i2) entered disabled state [ 4806.840990] tap105i2: entered allmulticast mode [ 4806.841045] vmbr0: port 4(tap105i2) entered blocking state [ 4806.841047] vmbr0: port 4(tap105i2) entered forwarding state [ 4828.622748] zd16: p1 p2 [ 4828.804959] tap105i0: left allmulticast mode [ 4828.804979] vmbr0v999: port 2(tap105i0) entered disabled state [ 4829.018374] tap105i1: left allmulticast mode [ 4829.018392] vmbr0: port 3(tap105i1) entered disabled state [ 4829.230184] tap105i2: left allmulticast mode [ 4829.230203] vmbr0: port 4(tap105i2) entered disabled state [ 4830.809454] tap105i0: entered promiscuous mode [ 4830.845470] vmbr0v999: port 2(tap105i0) entered blocking state [ 4830.845474] vmbr0v999: port 2(tap105i0) entered disabled state [ 4830.845492] tap105i0: entered allmulticast mode [ 4830.845558] vmbr0v999: port 2(tap105i0) entered blocking state [ 4830.845560] vmbr0v999: port 2(tap105i0) entered forwarding state [ 4831.504959] tap105i1: entered promiscuous mode [ 4831.526090] vmbr0: port 3(tap105i1) entered blocking state [ 4831.526095] vmbr0: port 3(tap105i1) entered disabled state [ 4831.526113] tap105i1: entered allmulticast mode [ 4831.526168] vmbr0: port 3(tap105i1) entered blocking state [ 4831.526170] vmbr0: port 3(tap105i1) entered forwarding state [ 4832.182309] tap105i2: entered promiscuous mode [ 4832.204036] vmbr0: port 4(tap105i2) entered blocking state [ 4832.204041] vmbr0: port 4(tap105i2) entered disabled state [ 4832.204054] tap105i2: entered allmulticast mode [ 4832.204125] vmbr0: port 4(tap105i2) entered blocking state [ 4832.204127] vmbr0: port 4(tap105i2) entered forwarding state [ 4986.482059] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 5226.470947] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 5346.479444] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 5466.478692] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 5586.516094] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 5706.541621] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 5826.534949] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 5946.522413] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 5965.353482] zd16: p1 p2 [ 5965.534832] tap105i0: left allmulticast mode [ 5965.534850] vmbr0v999: port 2(tap105i0) entered disabled state [ 5965.741680] tap105i1: left allmulticast mode [ 5965.741698] vmbr0: port 3(tap105i1) entered disabled state [ 5965.942901] tap105i2: left allmulticast mode [ 5965.942920] vmbr0: port 4(tap105i2) entered disabled state [ 5967.503614] tap105i0: entered promiscuous mode [ 5967.543175] vmbr0v999: port 2(tap105i0) entered blocking state [ 5967.543180] vmbr0v999: port 2(tap105i0) entered disabled state [ 5967.543198] tap105i0: entered allmulticast mode [ 5967.543273] vmbr0v999: port 2(tap105i0) entered blocking state [ 5967.543277] vmbr0v999: port 2(tap105i0) entered forwarding state [ 5968.214196] tap105i1: entered promiscuous mode [ 5968.236606] vmbr0: port 3(tap105i1) entered blocking state [ 5968.236611] vmbr0: port 3(tap105i1) entered disabled state [ 5968.236629] tap105i1: entered allmulticast mode [ 5968.236691] vmbr0: port 3(tap105i1) entered blocking state [ 5968.236694] vmbr0: port 3(tap105i1) entered forwarding state [ 5968.899864] tap105i2: entered promiscuous mode [ 5968.920911] vmbr0: port 4(tap105i2) entered blocking state [ 5968.920916] vmbr0: port 4(tap105i2) entered disabled state [ 5968.920929] tap105i2: entered allmulticast mode [ 5968.920982] vmbr0: port 4(tap105i2) entered blocking state [ 5968.920984] vmbr0: port 4(tap105i2) entered forwarding state [ 6066.500832] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 6186.512039] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 6191.293632] zd16: p1 p2 [ 6191.476778] tap105i0: left allmulticast mode [ 6191.476796] vmbr0v999: port 2(tap105i0) entered disabled state [ 6191.692259] tap105i1: left allmulticast mode [ 6191.692277] vmbr0: port 3(tap105i1) entered disabled state [ 6191.918307] tap105i2: left allmulticast mode [ 6191.918326] vmbr0: port 4(tap105i2) entered disabled state [ 6193.506093] tap105i0: entered promiscuous mode [ 6193.544146] vmbr0v999: port 2(tap105i0) entered blocking state [ 6193.544151] vmbr0v999: port 2(tap105i0) entered disabled state [ 6193.544168] tap105i0: entered allmulticast mode [ 6193.544234] vmbr0v999: port 2(tap105i0) entered blocking state [ 6193.544237] vmbr0v999: port 2(tap105i0) entered forwarding state [ 6194.202462] tap105i1: entered promiscuous mode [ 6194.223850] vmbr0: port 3(tap105i1) entered blocking state [ 6194.223855] vmbr0: port 3(tap105i1) entered disabled state [ 6194.223871] tap105i1: entered allmulticast mode [ 6194.223934] vmbr0: port 3(tap105i1) entered blocking state [ 6194.223937] vmbr0: port 3(tap105i1) entered forwarding state [ 6194.882562] tap105i2: entered promiscuous mode [ 6194.903074] vmbr0: port 4(tap105i2) entered blocking state [ 6194.903079] vmbr0: port 4(tap105i2) entered disabled state [ 6194.903096] tap105i2: entered allmulticast mode [ 6194.903152] vmbr0: port 4(tap105i2) entered blocking state [ 6194.903154] vmbr0: port 4(tap105i2) entered forwarding state [ 6306.514709] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 6328.448134] zd16: p1 p2 [ 6328.631401] tap105i0: left allmulticast mode [ 6328.631420] vmbr0v999: port 2(tap105i0) entered disabled state [ 6328.842284] tap105i1: left allmulticast mode [ 6328.842303] vmbr0: port 3(tap105i1) entered disabled state [ 6329.059620] tap105i2: left allmulticast mode [ 6329.059642] vmbr0: port 4(tap105i2) entered disabled state [ 6391.286935] tap105i0: entered promiscuous mode [ 6391.333955] vmbr0v999: port 2(tap105i0) entered blocking state [ 6391.333960] vmbr0v999: port 2(tap105i0) entered disabled state [ 6391.333978] tap105i0: entered allmulticast mode [ 6391.334051] vmbr0v999: port 2(tap105i0) entered blocking state [ 6391.334055] vmbr0v999: port 2(tap105i0) entered forwarding state [ 6392.008013] tap105i1: entered promiscuous mode [ 6392.029724] vmbr0: port 3(tap105i1) entered blocking state [ 6392.029729] vmbr0: port 3(tap105i1) entered disabled state [ 6392.029747] tap105i1: entered allmulticast mode [ 6392.029804] vmbr0: port 3(tap105i1) entered blocking state [ 6392.029806] vmbr0: port 3(tap105i1) entered forwarding state [ 6426.509121] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 6546.519538] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 6814.569127] zd16: p1 p2 [ 6814.753890] tap105i0: left allmulticast mode [ 6814.753909] vmbr0v999: port 2(tap105i0) entered disabled state [ 6814.957964] tap105i1: left allmulticast mode [ 6814.957984] vmbr0: port 3(tap105i1) entered disabled state [ 6816.538188] tap105i0: entered promiscuous mode [ 6816.577979] vmbr0v999: port 2(tap105i0) entered blocking state [ 6816.577984] vmbr0v999: port 2(tap105i0) entered disabled state [ 6816.577996] tap105i0: entered allmulticast mode [ 6816.578072] vmbr0v999: port 2(tap105i0) entered blocking state [ 6816.578076] vmbr0v999: port 2(tap105i0) entered forwarding state [ 6817.263177] tap105i1: entered promiscuous mode [ 6817.286329] vmbr0: port 3(tap105i1) entered blocking state [ 6817.286333] vmbr0: port 3(tap105i1) entered disabled state [ 6817.286351] tap105i1: entered allmulticast mode [ 6817.286407] vmbr0: port 3(tap105i1) entered blocking state [ 6817.286409] vmbr0: port 3(tap105i1) entered forwarding state [ 6966.525892] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 7476.534214] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 7579.106541] tap105i1: left allmulticast mode [ 7579.106559] vmbr0: port 3(tap105i1) entered disabled state [ 7588.141912] zd16: p1 p2 [ 7588.324281] tap105i0: left allmulticast mode [ 7588.324306] vmbr0v999: port 2(tap105i0) entered disabled state [ 7589.891820] tap105i0: entered promiscuous mode [ 7589.930580] vmbr0v999: port 2(tap105i0) entered blocking state [ 7589.930585] vmbr0v999: port 2(tap105i0) entered disabled state [ 7589.930604] tap105i0: entered allmulticast mode [ 7589.930680] vmbr0v999: port 2(tap105i0) entered blocking state [ 7589.930684] vmbr0v999: port 2(tap105i0) entered forwarding state [ 7596.535613] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 7716.557129] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 7836.607643] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 8916.615286] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 9036.620624] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 9156.667040] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 9546.626545] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 9666.632154] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [ 9786.645443] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [10026.701604] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [10081.254401] zd16: p1 p2 [10081.438906] tap105i0: left allmulticast mode [10081.438924] vmbr0v999: port 2(tap105i0) entered disabled state [10587.345466] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [10588.291147] tap105i0: entered promiscuous mode [10588.344838] vmbr0: port 3(fwpr105p0) entered blocking state [10588.344843] vmbr0: port 3(fwpr105p0) entered disabled state [10588.344861] fwpr105p0: entered allmulticast mode [10588.344899] fwpr105p0: entered promiscuous mode [10588.344928] vmbr0: port 3(fwpr105p0) entered blocking state [10588.344930] vmbr0: port 3(fwpr105p0) entered forwarding state [10588.355624] fwbr105i0: port 1(fwln105i0) entered blocking state [10588.355629] fwbr105i0: port 1(fwln105i0) entered disabled state [10588.355645] fwln105i0: entered allmulticast mode [10588.355683] fwln105i0: entered promiscuous mode [10588.355715] fwbr105i0: port 1(fwln105i0) entered blocking state [10588.355717] fwbr105i0: port 1(fwln105i0) entered forwarding state [10588.366506] fwbr105i0: port 2(tap105i0) entered blocking state [10588.366510] fwbr105i0: port 2(tap105i0) entered disabled state [10588.366517] tap105i0: entered allmulticast mode [10588.366569] fwbr105i0: port 2(tap105i0) entered blocking state [10588.366571] fwbr105i0: port 2(tap105i0) entered forwarding state [10588.478193] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [10622.131764] tap105i0: left allmulticast mode [10622.131782] fwbr105i0: port 2(tap105i0) entered disabled state [10622.143432] fwbr105i0: port 1(fwln105i0) entered disabled state [10622.143522] vmbr0: port 3(fwpr105p0) entered disabled state [10622.143612] fwln105i0 (unregistering): left allmulticast mode [10622.143615] fwln105i0 (unregistering): left promiscuous mode [10622.143617] fwbr105i0: port 1(fwln105i0) entered disabled state [10622.154675] fwpr105p0 (unregistering): left allmulticast mode [10622.154679] fwpr105p0 (unregistering): left promiscuous mode [10622.154681] vmbr0: port 3(fwpr105p0) entered disabled state [10623.070603] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [10623.987375] tap105i0: entered promiscuous mode [10624.037062] vmbr0: port 3(fwpr105p0) entered blocking state [10624.037066] vmbr0: port 3(fwpr105p0) entered disabled state [10624.037084] fwpr105p0: entered allmulticast mode [10624.037123] fwpr105p0: entered promiscuous mode [10624.037152] vmbr0: port 3(fwpr105p0) entered blocking state [10624.037154] vmbr0: port 3(fwpr105p0) entered forwarding state [10624.047359] fwbr105i0: port 1(fwln105i0) entered blocking state [10624.047363] fwbr105i0: port 1(fwln105i0) entered disabled state [10624.047381] fwln105i0: entered allmulticast mode [10624.047425] fwln105i0: entered promiscuous mode [10624.047470] fwbr105i0: port 1(fwln105i0) entered blocking state [10624.047472] fwbr105i0: port 1(fwln105i0) entered forwarding state [10624.057371] fwbr105i0: port 2(tap105i0) entered blocking state [10624.057376] fwbr105i0: port 2(tap105i0) entered disabled state [10624.057388] tap105i0: entered allmulticast mode [10624.057462] fwbr105i0: port 2(tap105i0) entered blocking state [10624.057464] fwbr105i0: port 2(tap105i0) entered forwarding state [10624.171135] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [11225.918464] tap105i0: left allmulticast mode [11225.918482] fwbr105i0: port 2(tap105i0) entered disabled state [11225.929718] fwbr105i0: port 1(fwln105i0) entered disabled state [11225.929830] vmbr0: port 3(fwpr105p0) entered disabled state [11225.929944] fwln105i0 (unregistering): left allmulticast mode [11225.929947] fwln105i0 (unregistering): left promiscuous mode [11225.929949] fwbr105i0: port 1(fwln105i0) entered disabled state [11225.941017] fwpr105p0 (unregistering): left allmulticast mode [11225.941021] fwpr105p0 (unregistering): left promiscuous mode [11225.941023] vmbr0: port 3(fwpr105p0) entered disabled state [11226.846931] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [11227.771128] tap105i0: entered promiscuous mode [11227.834054] vmbr0: port 3(fwpr105p0) entered blocking state [11227.834060] vmbr0: port 3(fwpr105p0) entered disabled state [11227.834072] fwpr105p0: entered allmulticast mode [11227.834109] fwpr105p0: entered promiscuous mode [11227.834138] vmbr0: port 3(fwpr105p0) entered blocking state [11227.834139] vmbr0: port 3(fwpr105p0) entered forwarding state [11227.845504] fwbr105i0: port 1(fwln105i0) entered blocking state [11227.845509] fwbr105i0: port 1(fwln105i0) entered disabled state [11227.845521] fwln105i0: entered allmulticast mode [11227.845559] fwln105i0: entered promiscuous mode [11227.845602] fwbr105i0: port 1(fwln105i0) entered blocking state [11227.845605] fwbr105i0: port 1(fwln105i0) entered forwarding state [11227.857190] fwbr105i0: port 2(tap105i0) entered blocking state [11227.857196] fwbr105i0: port 2(tap105i0) entered disabled state [11227.857207] tap105i0: entered allmulticast mode [11227.857271] fwbr105i0: port 2(tap105i0) entered blocking state [11227.857274] fwbr105i0: port 2(tap105i0) entered forwarding state [11227.978841] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled [11517.071592] tap105i0: left allmulticast mode [11517.071610] fwbr105i0: port 2(tap105i0) entered disabled state [11517.083436] fwbr105i0: port 1(fwln105i0) entered disabled state [11517.083529] vmbr0: port 3(fwpr105p0) entered disabled state [11517.083628] fwln105i0 (unregistering): left allmulticast mode [11517.083631] fwln105i0 (unregistering): left promiscuous mode [11517.083633] fwbr105i0: port 1(fwln105i0) entered disabled state [11517.094405] fwpr105p0 (unregistering): left allmulticast mode [11517.094408] fwpr105p0 (unregistering): left promiscuous mode [11517.094410] vmbr0: port 3(fwpr105p0) entered disabled state [11524.858803] tap100i0: left allmulticast mode [11524.858821] vmbr0: port 2(tap100i0) entered disabled state [11524.999444] usb 1-3: reset full-speed USB device number 2 using xhci_hcd [11525.127521] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021 [11525.130501] Bluetooth: hci0: Reading supported features failed (-16) [11525.130507] Bluetooth: hci0: Error reading debug features [11525.130510] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported. [11525.240490] usb 1-5: reset full-speed USB device number 3 using xhci_hcd [11525.369541] Bluetooth: hci1: CSR: Setting up dongle with HCI ver=10 rev=0201 [11525.369546] Bluetooth: hci1: LMP ver=10 subver=0201; manufacturer=10 [11525.369549] Bluetooth: hci1: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once... [11525.481454] usb 1-6: reset full-speed USB device number 4 using xhci_hcd [11525.608623] cp210x 1-6:1.0: cp210x converter detected [11525.610422] usb 1-6: cp210x converter now attached to ttyUSB0 [11525.694503] Bluetooth: hci1: HCI Delete Stored Link Key command is advertised, but not supported. [11525.694507] Bluetooth: hci1: HCI Read Default Erroneous Data Reporting command is advertised, but not supported. [11525.694508] Bluetooth: hci1: HCI Set Event Filter command not supported.