[ 0.376066] i2c_dev: i2c /dev entries driver [ 0.379420] SCSI subsystem initialized [ 0.381910] device-mapper: uevent: version 1.0.3 [ 0.381938] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.435918] xor: automatically using best checksumming function avx [ 0.452947] raid6: avx512x4 gen() 51791 MB/s [ 0.469952] raid6: avx512x2 gen() 52374 MB/s [ 0.486957] raid6: avx512x1 gen() 52721 MB/s [ 0.503962] raid6: avx2x4 gen() 52212 MB/s [ 0.520967] raid6: avx2x2 gen() 53022 MB/s [ 0.537972] raid6: avx2x1 gen() 41973 MB/s [ 0.537972] raid6: using algorithm avx2x2 gen() 53022 MB/s [ 0.554977] raid6: .... xor() 53039 MB/s, rmw enabled [ 0.554977] raid6: using avx512x2 recovery algorithm [ 0.575258] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 0.580307] ACPI: bus type USB registered [ 0.580319] usbcore: registered new interface driver usbfs [ 0.580323] usbcore: registered new interface driver hub [ 0.580330] usbcore: registered new device driver usb [ 0.662419] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.662473] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.664834] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no) [ 0.665102] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input2 [ 0.666505] ACPI: button: Power Button [PWRF] cryptd: max_cpu_qlen set to 1000 [ 0.668660] Linux agpgart interface v0.103 [ 0.669035] ccp 0000:0c:00.2: enabling device (0000 -> 0002) [ 0.669155] ccp 0000:0c:00.2: psp: unable to access the device: you might be running a broken BIOS. [ 0.671023] xhci_hcd 0000:0a:00.0: xHCI Host Controller [ 0.671029] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 1 [ 0.671168] libata version 3.00 loaded. [ 0.671187] AVX2 version of gcm_enc/dec engaged. [ 0.671223] AES CTR mode by8 optimization enabled [ 0.674146] ahci 0000:0b:00.0: version 3.0 [ 0.674151] ahci 0000:0b:00.0: enabling device (0000 -> 0002) [ 0.674235] ahci 0000:0b:00.0: SSS flag set, parallel bus scan disabled [ 0.674262] ahci 0000:0b:00.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0xf impl SATA mode [ 0.674264] ahci 0000:0b:00.0: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 0.674570] scsi host0: ahci [ 0.674787] scsi host1: ahci [ 0.674937] scsi host2: ahci [ 0.675044] scsi host3: ahci [ 0.675145] scsi host4: ahci [ 0.675262] scsi host5: ahci [ 0.675323] ata1: SATA max UDMA/133 abar m1024@0xfcd80000 port 0xfcd80100 irq 42 [ 0.675325] ata2: SATA max UDMA/133 abar m1024@0xfcd80000 port 0xfcd80180 irq 42 [ 0.675326] ata3: SATA max UDMA/133 abar m1024@0xfcd80000 port 0xfcd80200 irq 42 [ 0.675327] ata4: SATA max UDMA/133 abar m1024@0xfcd80000 port 0xfcd80280 irq 42 [ 0.675328] ata5: DUMMY [ 0.675328] ata6: DUMMY [ 0.680967] ACPI: bus type drm_connector registered [ 0.727008] xhci_hcd 0000:0a:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 0.727154] xhci_hcd 0000:0a:00.0: xHCI Host Controller [ 0.727156] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 2 [ 0.727158] xhci_hcd 0000:0a:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.728023] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 0.728025] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.728026] usb usb1: Product: xHCI Host Controller [ 0.728027] usb usb1: Manufacturer: Linux 6.3.5-desktop-3omv2390 xhci-hcd [ 0.728027] usb usb1: SerialNumber: ... [ 0.728118] hub 1-0:1.0: USB hub found [ 0.728128] hub 1-0:1.0: 12 ports detected [ 0.730377] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.730387] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03 [ 0.730388] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.730389] usb usb2: Product: xHCI Host Controller [ 0.730390] usb usb2: Manufacturer: Linux 6.3.5-desktop-3omv2390 xhci-hcd [ 0.730390] usb usb2: SerialNumber: ... [ 0.730427] hub 2-0:1.0: USB hub found [ 0.730434] hub 2-0:1.0: 6 ports detected [ 0.731686] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 0.731689] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3 [ 0.732041] xhci_hcd 0000:0c:00.3: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000410 [ 0.732130] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 0.732132] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4 [ 0.732132] xhci_hcd 0000:0c:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 0.732148] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 0.732149] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.732150] usb usb3: Product: xHCI Host Controller [ 0.732150] usb usb3: Manufacturer: Linux 6.3.5-desktop-3omv2390 xhci-hcd [ 0.732151] usb usb3: SerialNumber: ... [ 0.732191] hub 3-0:1.0: USB hub found [ 0.732194] hub 3-0:1.0: 2 ports detected [ 0.732637] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.732648] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03 [ 0.732649] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.732650] usb usb4: Product: xHCI Host Controller [ 0.732650] usb usb4: Manufacturer: Linux 6.3.5-desktop-3omv2390 xhci-hcd [ 0.732651] usb usb4: SerialNumber: ... [ 0.732689] hub 4-0:1.0: USB hub found [ 0.732691] hub 4-0:1.0: 2 ports detected [ 0.733153] xhci_hcd 0000:0c:00.4: xHCI Host Controller [ 0.733156] xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 5 [ 0.733494] xhci_hcd 0000:0c:00.4: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000410 [ 0.733584] xhci_hcd 0000:0c:00.4: xHCI Host Controller [ 0.733585] xhci_hcd 0000:0c:00.4: new USB bus registered, assigned bus number 6 [ 0.733586] xhci_hcd 0000:0c:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 0.733601] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 0.733602] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.733603] usb usb5: Product: xHCI Host Controller [ 0.733603] usb usb5: Manufacturer: Linux 6.3.5-desktop-3omv2390 xhci-hcd [ 0.733604] usb usb5: SerialNumber: ... [ 0.733650] hub 5-0:1.0: USB hub found [ 0.733653] hub 5-0:1.0: 2 ports detected [ 0.734091] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.734100] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03 [ 0.734101] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.734102] usb usb6: Product: xHCI Host Controller [ 0.734103] usb usb6: Manufacturer: Linux 6.3.5-desktop-3omv2390 xhci-hcd [ 0.734103] usb usb6: SerialNumber: ... [ 0.734150] hub 6-0:1.0: USB hub found [ 0.734153] hub 6-0:1.0: 2 ports detected [ 0.734602] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 0.734604] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 7 [ 0.735868] xhci_hcd 0000:0d:00.0: USB3 root hub has no ports [ 0.735870] xhci_hcd 0000:0d:00.0: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410 [ 0.735966] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 0.735967] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 8 [ 0.735968] xhci_hcd 0000:0d:00.0: Host supports USB 3.0 SuperSpeed [ 0.735993] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 0.735994] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.735995] usb usb7: Product: xHCI Host Controller [ 0.735995] usb usb7: Manufacturer: Linux 6.3.5-desktop-3omv2390 xhci-hcd [ 0.735996] usb usb7: SerialNumber: ... [ 0.736034] hub 7-0:1.0: USB hub found [ 0.736037] hub 7-0:1.0: 1 port detected [ 0.736276] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.736286] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03 [ 0.736287] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.736287] usb usb8: Product: xHCI Host Controller [ 0.736288] usb usb8: Manufacturer: Linux 6.3.5-desktop-3omv2390 xhci-hcd [ 0.736288] usb usb8: SerialNumber: ... [ 0.736324] hub 8-0:1.0: USB hub found [ 0.736326] hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 0.974778] usb 5-1: new high-speed USB device number 2 using xhci_hcd [ 0.974790] usb 7-1: new full-speed USB device number 2 using xhci_hcd [ 0.986230] ata1: SATA link down (SStatus 0 SControl 300) [ 1.028793] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 1.120949] usb 7-1: New USB device found, idVendor=26ce, idProduct=01a2, bcdDevice= 0.00 [ 1.120950] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.120951] usb 7-1: Product: LED Controller [ 1.120952] usb 7-1: Manufacturer: ASRock [ 1.120953] usb 7-1: SerialNumber: ... [ 1.234720] usb 1-3: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00 [ 1.234721] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.234722] usb 1-3: Product: USB2.0 HUB [ 1.241809] hub 1-3:1.0: USB hub found [ 1.244710] hub 1-3:1.0: 4 ports detected [ 1.268129] usb 5-1: New USB device found, idVendor=07d1, idProduct=3c07, bcdDevice= 0.01 [ 1.268130] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.268131] usb 5-1: Product: 802.11 bg WLAN [ 1.268131] usb 5-1: Manufacturer: Ralink [ 1.284264] tsc: Refined TSC clocksource calibration: 3693.063 MHz [ 1.284274] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a7779d5e21, max_idle_ns: 881590797124 ns [ 1.284303] clocksource: Switched to clocksource tsc [ 1.336959] usb 2-6: new SuperSpeed USB device number 2 using xhci_hcd [ 1.350726] usb 2-6: New USB device found, idVendor=0bc2, idProduct=2037, bcdDevice=19.01 [ 1.350728] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.350728] usb 2-6: Product: Expansion HDD [ 1.350729] usb 2-6: Manufacturer: Seagate [ 1.350730] usb 2-6: SerialNumber: ... [ 1.452267] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.452497] ata2.00: supports DRM functions and may not be fully accessible [ 1.452499] ata2.00: ATA-11: Samsung SSD 870 EVO 500GB, SVT02B6Q, max UDMA/133 [ 1.452865] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.455037] ata2.00: Features: Trust Dev-Sleep NCQ-sndrcv [ 1.455305] ata2.00: supports DRM functions and may not be fully accessible [ 1.457958] ata2.00: configured for UDMA/133 [ 1.458042] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 870 2B6Q PQ: 0 ANSI: 5 [ 1.525264] usb 1-7: new high-speed USB device number 3 using xhci_hcd [ 1.737737] usb 1-7: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.52 [ 1.737739] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.737739] usb 1-7: Product: USB2.0 Hub [ 1.747828] hub 1-7:1.0: USB hub found [ 1.751731] hub 1-7:1.0: 4 ports detected [ 1.761606] ata3: SATA link down (SStatus 0 SControl 300) [ 1.792260] usb 1-3.4: new high-speed USB device number 4 using xhci_hcd [ 1.891738] usb 1-3.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00 [ 1.891740] usb 1-3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.891741] usb 1-3.4: Product: USB2.0 HUB [ 1.900750] hub 1-3.4:1.0: USB hub found [ 1.903739] hub 1-3.4:1.0: 4 ports detected [ 2.055255] usb 1-11: new low-speed USB device number 5 using xhci_hcd [ 2.066920] ata4: SATA link down (SStatus 0 SControl 300) [ 2.070576] hid: raw HID events driver (C) Jiri Kosina [ 2.071914] ata2.00: Enabling discard_zeroes_data [ 2.071922] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 2.071928] sd 1:0:0:0: [sda] Write Protect is off [ 2.071930] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.071937] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.071949] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.072008] ata2.00: Enabling discard_zeroes_data [ 2.077991] usbcore: registered new interface driver usbhid [ 2.077993] usbhid: USB HID core driver [ 2.091519] sda: sda1 sda2 [ 2.091572] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.092794] input: ASRock LED Controller as /devices/pci0000:00/0000:00:08.3/0000:0d:00.0/usb7/7-1/7-1:1.0/0003:26CE:01A2.0001/input/input3 [ 2.098936] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 2.144294] hid-generic 0003:26CE:01A2.0001: input,hidraw0: USB HID v1.10 Device [ASRock LED Controller] on usb-0000:0d:00.0-1/input0 [ 2.194007] [drm] amdgpu kernel modesetting enabled. [ 2.196159] amdgpu: Ignoring ACPI CRAT on non-APU system [ 2.196160] amdgpu: Virtual CRAT table created for CPU [ 2.196164] amdgpu: Topology: Add CPU node [ 2.196227] amdgpu 0000:0c:00.0: enabling device (0006 -> 0007) [ 2.196244] [drm] initializing kernel modesetting (IP DISCOVERY 0x1002:0x164E 0x1002:0x164E 0xC4). [ 2.196249] [drm] register mmio base: 0xFCC00000 [ 2.196250] [drm] register mmio size: 524288 [ 2.196943] [drm] add ip block number 0 <nv_common> [ 2.196943] [drm] add ip block number 1 <gmc_v10_0> [ 2.196944] [drm] add ip block number 2 <navi10_ih> [ 2.196944] [drm] add ip block number 3 <psp> [ 2.196944] [drm] add ip block number 4 <smu> [ 2.196945] [drm] add ip block number 5 <dm> [ 2.196945] [drm] add ip block number 6 <gfx_v10_0> [ 2.196945] [drm] add ip block number 7 <sdma_v5_2> [ 2.196946] [drm] add ip block number 8 <vcn_v3_0> [ 2.196946] [drm] add ip block number 9 <jpeg_v3_0> [ 2.196955] amdgpu 0000:0c:00.0: amdgpu: Fetched VBIOS from VFCT [ 2.196956] amdgpu: ATOM BIOS: 102-RAPHAEL-008 [ 2.214760] [drm] VCN(0) decode is enabled in VM mode [ 2.214761] [drm] VCN(0) encode is enabled in VM mode [ 2.228405] [drm] JPEG decode is enabled in VM mode [ 2.228420] amdgpu 0000:0c:00.0: vgaarb: deactivate vga console [ 2.228421] amdgpu 0000:0c:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default) [ 2.228427] amdgpu 0000:0c:00.0: amdgpu: PCIE atomic ops is not supported [ 2.228449] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 2.228452] amdgpu 0000:0c:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) [ 2.228453] amdgpu 0000:0c:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 2.228453] amdgpu 0000:0c:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 2.228457] [drm] Detected VRAM RAM=512M, BAR=512M [ 2.228457] [drm] RAM width 128bits DDR5 [ 2.228496] [drm] amdgpu: 512M of VRAM memory ready [ 2.228496] [drm] amdgpu: 7550M of GTT memory ready. [ 2.228502] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.228594] [drm] PCIE GART of 1024M enabled (table at 0x000000F41FC00000). [ 2.228657] [drm] Loading DMUB firmware via PSP: version=0x05000500 [ 2.229850] [drm] use_doorbell being set to: [true] [drm] Found VCN firmware Version ENC: 1.24 DEC: 2 VEP: 0 Revision: 0 [ 2.229875] amdgpu 0000:0c:00.0: amdgpu: Will use PSP to load VCN firmware [ 2.251952] [drm] reserve 0xa00000 from 0xf41e000000 for PSP TMR [ 2.315757] amdgpu 0000:0c:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 2.321657] amdgpu 0000:0c:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 2.321657] amdgpu 0000:0c:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available [ 2.321693] amdgpu 0000:0c:00.0: amdgpu: smu driver if version = 0x00000004, smu fw if version = 0x00000005, smu fw program = 0, smu fw version = 0x00544fdd (84.79.221) [ 2.321694] amdgpu 0000:0c:00.0: amdgpu: SMU driver if version not matched [ 2.322787] amdgpu 0000:0c:00.0: amdgpu: SMU is initialized successfully! [ 2.322974] [drm] Display Core initialized with v3.2.223! [ 2.322975] [drm] DP-HDMI FRL PCON supported [ 2.323630] [drm] DMUB hardware initialized: version=0x05000500 [ 2.340594] usb 1-11: New USB device found, idVendor=1bcf, idProduct=08a0, bcdDevice= 1.04 [ 2.340597] usb 1-11: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.374299] [drm] kiq ring mec 2 pipe 1 q 0 [ 2.376214] [drm] VCN decode and encode initialized successfully(under DPG Mode). [ 2.376232] [drm] JPEG decode initialized successfully. [ 2.376776] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 2.376806] amdgpu: sdma_bitmap: 3 [ 2.376965] amdgpu: SRAT table not found [ 2.376966] amdgpu: Virtual CRAT table created for GPU [ 2.377036] amdgpu: Topology: Add dGPU node [0x164e:0x1002] kfd kfd: amdgpu: added device 1002:164e [ 2.377043] amdgpu 0000:0c:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 2, active_cu_number 2 [ 2.377070] amdgpu 0000:0c:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 [ 2.377071] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 2.377071] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 2.377071] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 2.377072] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 2.377072] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 2.377072] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 2.377073] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 2.377073] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 2.377073] amdgpu 0000:0c:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 2.377074] amdgpu 0000:0c:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0 [ 2.377074] amdgpu 0000:0c:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 1 [ 2.377074] amdgpu 0000:0c:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1 [ 2.377075] amdgpu 0000:0c:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1 [ 2.377075] amdgpu 0000:0c:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1 [ 2.377397] [drm] Initialized amdgpu 3.52.0 20150101 for 0000:0c:00.0 on minor 0 [ 2.380506] input: HID 1bcf:08a0 Mouse as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/0000:02:0c.0/0000:0a:00.0/usb1/1-11/1-11:1.0/0003:1BCF:08A0.0002/input/input4 [ 2.380538] input: HID 1bcf:08a0 Keyboard as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/0000:02:0c.0/0000:0a:00.0/usb1/1-11/1-11:1.0/0003:1BCF:08A0.0002/input/input5 [ 2.380686] fbcon: amdgpudrmfb (fb0) is primary device [ 2.380761] [drm] DSC precompute is not needed. [ 2.432290] input: HID 1bcf:08a0 as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/0000:02:0c.0/0000:0a:00.0/usb1/1-11/1-11:1.0/0003:1BCF:08A0.0002/input/input6 [ 2.432328] hid-generic 0003:1BCF:08A0.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HID 1bcf:08a0] on usb-0000:0a:00.0-11/input0 [ 2.500254] usb 1-3.4.1: new high-speed USB device number 6 using xhci_hcd [ 2.608557] [drm] REG_WAIT timeout 1us * 100000 tries - optc31_disable_crtc line:138 [ 2.677053] Console: switching to colour frame buffer device 240x67 [ 2.694905] amdgpu 0000:0c:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 2.724769] usb 1-3.4.1: New USB device found, idVendor=1f75, idProduct=0621, bcdDevice= 0.36 [ 2.724771] usb 1-3.4.1: New USB device strings: Mfr=4, Product=5, SerialNumber=... [ 2.724772] usb 1-3.4.1: SerialNumber: ... [ 2.876264] usb 1-12: new low-speed USB device number 7 using xhci_hcd [ 3.189369] usb 1-12: New USB device found, idVendor=c0f4, idProduct=0201, bcdDevice= 1.00 [ 3.189371] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.189372] usb 1-12: Product: HCT USB Entry Keyboard [ 3.189372] usb 1-12: Manufacturer: Hengchangtong [ 3.189373] usb 1-12: SerialNumber: ... [ 3.224442] input: Hengchangtong HCT USB Entry Keyboard as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/0000:02:0c.0/0000:0a:00.0/usb1/1-12/1-12:1.0/0003:C0F4:0201.0003/input/input7 [ 3.276288] hid-generic 0003:C0F4:0201.0003: input,hidraw2: USB HID v1.11 Keyboard [Hengchangtong HCT USB Entry Keyboard] on usb-0000:0a:00.0-12/input0 [ 3.300485] input: Hengchangtong HCT USB Entry Keyboard Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/0000:02:0c.0/0000:0a:00.0/usb1/1-12/1-12:1.1/0003:C0F4:0201.0004/input/input8 [ 3.352276] input: Hengchangtong HCT USB Entry Keyboard System Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/0000:02:0c.0/0000:0a:00.0/usb1/1-12/1-12:1.1/0003:C0F4:0201.0004/input/input9 [ 3.352297] input: Hengchangtong HCT USB Entry Keyboard as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/0000:02:0c.0/0000:0a:00.0/usb1/1-12/1-12:1.1/0003:C0F4:0201.0004/input/input10 [ 3.352326] hid-generic 0003:C0F4:0201.0004: input,hidraw3: USB HID v1.11 Keyboard [Hengchangtong HCT USB Entry Keyboard] on usb-0000:0a:00.0-12/input1 [ 3.355919] usb-storage 1-3.4.1:1.0: USB Mass Storage device detected [ 3.356005] scsi host6: usb-storage 1-3.4.1:1.0 [ 3.356048] usbcore: registered new interface driver usb-storage [ 3.393552] scsi host7: uas [ 3.393597] usbcore: registered new interface driver uas [ 3.394544] scsi 7:0:0:0: Direct-Access Seagate Expansion HDD 1901 PQ: 0 ANSI: 6 [ 3.396505] sd 7:0:0:0: [sdb] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 3.396508] sd 7:0:0:0: [sdb] 4096-byte physical blocks [ 3.396658] sd 7:0:0:0: [sdb] Write Protect is off [ 3.396659] sd 7:0:0:0: [sdb] Mode Sense: 53 00 00 08 [ 3.396961] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.397387] sd 7:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 3.397388] sd 7:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [ 3.535678] sdb: sdb1 sdb2 sdb3 sdb4 [ 3.535754] sd 7:0:0:0: [sdb] Attached SCSI disk [ 4.669689] scsi 6:0:0:0: Direct-Access ST1000LM 024 HN-M101MBB PQ: 0 ANSI: 6 [ 4.670176] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.672946] sd 6:0:0:0: [sdc] Write Protect is off [ 4.672947] sd 6:0:0:0: [sdc] Mode Sense: 3b 00 00 00 [ 4.675944] sd 6:0:0:0: [sdc] No Caching mode page found [ 4.675946] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 6.664088] sdc: sdc1 [ 6.664177] sd 6:0:0:0: [sdc] Attached SCSI disk [ 11.964487] EXT4-fs (sdb2): orphan cleanup on readonly fs [ 11.964694] EXT4-fs (sdb2): mounted filesystem HASH_4F3-2727-1964-3D61-0D476D5D1400 with ordered data mode. Quota mode: none. [ 17.907109] zram0: detected capacity change from 0 to 15462400 [ 18.141853] Adding 7731196k swap on /dev/zram0. Priority:100 extents:1 across:7731196k SSDscFS [ 18.170974] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 18.170976] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 18.171039] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 18.529344] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 18.529346] RAPL PMU: hw unit of domain package 2^-16 Joules [ 18.698807] kvm_amd: TSC scaling supported [ 18.698809] kvm_amd: Nested Virtualization enabled [ 18.698810] kvm_amd: Nested Paging enabled [ 18.698813] kvm_amd: Virtual VMLOAD VMSAVE supported [ 18.698813] kvm_amd: Virtual GIF supported [ 18.698813] kvm_amd: LBR virtualization supported [ 19.095217] EDAC MC: Ver: 3.0.0 [ 19.096501] MCE: In-kernel MCE decoding enabled. [ 19.136432] intel_rapl_common: Found RAPL domain package [ 19.136433] intel_rapl_common: Found RAPL domain core [ 19.469086] snd_hda_intel 0000:0c:00.1: enabling device (0000 -> 0002) [ 19.469166] snd_hda_intel 0000:0c:00.1: Handle vga_switcheroo audio client [ 19.469249] snd_hda_intel 0000:0c:00.6: enabling device (0000 -> 0002) [ 19.505928] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 19.507251] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 19.512151] snd_hda_intel 0000:0c:00.1: bound 0000:0c:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 19.512687] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input11 [ 19.512712] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input12 [ 19.512735] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input13 [ 19.512753] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:0c:00.1/sound/card0/input14 [ 19.793326] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 19.793329] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 19.793330] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 19.793330] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 19.793331] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 19.793331] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 19.793332] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 19.793332] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 19.808802] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input15 [ 19.808832] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input16 [ 19.808857] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input17 [ 19.808882] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input18 [ 19.808903] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0c:00.6/sound/card1/input19 [ 20.011350] usb 5-1: reset high-speed USB device number 2 using xhci_hcd [ 20.191393] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 20.493298] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a [ 20.494075] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 20.495045] usbcore: registered new interface driver rt73usb [ 20.655014] Adding 31958012k swap on /dev/sdb4. Priority:-2 extents:1 across:31958012k FS [ 20.669718] rt73usb 5-1:1.0 wlp12s0f4u1: renamed from wlan0 [ 21.584422] EXT4-fs (sdb3): mounted filesystem HASH_5C4-56DF-01E4-C845-17F63E76BA47 with ordered data mode. Quota mode: none. [ 37.368447] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin' [ 37.449575] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7 [ 38.534359] NET: Registered PF_PACKET protocol family [ 39.961492] wlp12s0f4u1: authenticate with DEB56E8343C451E8363EC0E785A3FDAB [ 39.961504] wlp12s0f4u1: 80 MHz not supported, disabling VHT [ 40.009996] wlp12s0f4u1: send auth to DEB56E8343C451E8363EC0E785A3FDAB (try 1/3) [ 40.011725] wlp12s0f4u1: authenticated [ 40.012262] wlp12s0f4u1: associate with DEB56E8343C451E8363EC0E785A3FDAB (try 1/3) [ 40.016511] wlp12s0f4u1: RX AssocResp from DEB56E8343C451E8363EC0E785A3FDAB (capab=0x1411 status=0 aid=2) [ 40.032372] wlp12s0f4u1: associated [ 40.102400] IPv6: ADDRCONF(NETDEV_CHANGE): wlp12s0f4u1: link becomes ready [ 40.112552] wlp12s0f4u1: Limiting TX power to 20 (20 - 0) dBm as advertised by DEB56E8343C451E8363EC0E785A3FDAB [ 117.201622] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 429.319620] Non-volatile memory driver v1.3 [ 429.658719] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 429.673778] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 429.673799] sd 7:0:0:0: Attached scsi generic sg1 type 0 [ 429.673819] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 436.677788] Bluetooth: Core ver 2.22 [ 436.677801] NET: Registered PF_BLUETOOTH protocol family [ 436.677802] Bluetooth: HCI device and connection manager initialized [ 436.677804] Bluetooth: HCI socket layer initialized [ 436.677805] Bluetooth: L2CAP socket layer initialized [ 436.677806] Bluetooth: SCO socket layer initialized [ 697.011908] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 697.011911] Bluetooth: BNEP filters: protocol multicast [ 697.011915] Bluetooth: BNEP socket layer initialized [ 3716.390668] wlp12s0f4u1: deauthenticating from DEB56E8343C451E8363EC0E785A3FDAB by local choice (Reason: 3=DEAUTH_LEAVING) [ 3721.352540] PM: hibernation: hibernation entry [ 3723.245590] Filesystems sync: 1.892 seconds [ 3723.246032] Freezing user space processes [ 3723.486619] Freezing user space processes completed (elapsed 0.240 seconds) [ 3723.486625] OOM killer disabled. [ 3723.488236] PM: hibernation: Preallocating image memory [ 3723.739366] PM: hibernation: Allocated 1384774 pages for snapshot [ 3723.739369] PM: hibernation: Allocated 5539096 kbytes in 0.25 seconds (22156.38 MB/s) [ 3723.739371] Freezing remaining freezable tasks [ 3723.740744] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 3723.740893] printk: Suspending console(s) (use no_console_suspend to debug) [ 3723.869536] amdgpu 0000:0c:00.0: amdgpu: MODE2 reset [ 3724.462139] ACPI: PM: Preparing to enter system sleep state S4 [ 3724.980380] ACPI: PM: Saving platform NVS memory [ 3724.993677] Disabling non-boot CPUs ... [ 3724.995262] smpboot: CPU 1 is now offline [ 3724.997188] smpboot: CPU 2 is now offline [ 3724.999054] smpboot: CPU 3 is now offline [ 3725.000856] smpboot: CPU 4 is now offline [ 3725.002592] smpboot: CPU 5 is now offline [ 3725.004291] smpboot: CPU 6 is now offline [ 3725.006683] smpboot: CPU 7 is now offline [ 3725.008298] smpboot: CPU 8 is now offline [ 3725.009962] smpboot: CPU 9 is now offline [ 3725.011651] smpboot: CPU 10 is now offline [ 3725.013403] smpboot: CPU 11 is now offline [ 3725.015122] smpboot: CPU 12 is now offline [ 3725.016661] smpboot: CPU 13 is now offline [ 3725.018211] smpboot: CPU 14 is now offline [ 3725.019774] smpboot: CPU 15 is now offline [ 3725.021337] smpboot: CPU 16 is now offline [ 3725.022888] smpboot: CPU 17 is now offline [ 3725.024384] smpboot: CPU 18 is now offline [ 3725.025916] smpboot: CPU 19 is now offline [ 3725.027432] smpboot: CPU 20 is now offline [ 3725.029046] smpboot: CPU 21 is now offline [ 3725.030619] smpboot: CPU 22 is now offline [ 3725.032152] smpboot: CPU 23 is now offline [ 3725.032598] PM: hibernation: Creating image: [ 3725.127732] PM: hibernation: Need to copy 1449526 pages [ 3725.033170] ACPI: PM: Restoring platform NVS memory [ 3725.035636] LVT offset 0 assigned for vector 0x400 [ 3725.036091] Enabling non-boot CPUs ... [ 3725.036269] x86: Booting SMP configuration: [ 3725.036270] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 3725.039678] ACPI: \_SB_.PLTF.C002: Found 3 idle states [ 3725.039866] CPU1 is up [ 3725.039961] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 3725.042202] ACPI: \_SB_.PLTF.C004: Found 3 idle states [ 3725.042304] CPU2 is up [ 3725.042397] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 3725.044636] ACPI: \_SB_.PLTF.C006: Found 3 idle states [ 3725.044739] CPU3 is up [ 3725.044831] smpboot: Booting Node 0 Processor 4 APIC 0x8 [ 3725.047247] ACPI: \_SB_.PLTF.C008: Found 3 idle states [ 3725.047355] CPU4 is up [ 3725.047443] smpboot: Booting Node 0 Processor 5 APIC 0xa [ 3725.049677] ACPI: \_SB_.PLTF.C00A: Found 3 idle states [ 3725.049787] CPU5 is up [ 3725.049878] smpboot: Booting Node 0 Processor 6 APIC 0x10 [ 3725.052122] ACPI: \_SB_.PLTF.C00C: Found 3 idle states [ 3725.052283] CPU6 is up [ 3725.052364] smpboot: Booting Node 0 Processor 7 APIC 0x12 [ 3725.054593] ACPI: \_SB_.PLTF.C00E: Found 3 idle states [ 3725.054716] CPU7 is up [ 3725.054795] smpboot: Booting Node 0 Processor 8 APIC 0x14 [ 3725.057022] ACPI: \_SB_.PLTF.C010: Found 3 idle states [ 3725.057150] CPU8 is up [ 3725.057233] smpboot: Booting Node 0 Processor 9 APIC 0x16 [ 3725.059464] ACPI: \_SB_.PLTF.C012: Found 3 idle states [ 3725.059599] CPU9 is up [ 3725.059679] smpboot: Booting Node 0 Processor 10 APIC 0x18 [ 3725.061915] ACPI: \_SB_.PLTF.C014: Found 3 idle states [ 3725.062058] CPU10 is up [ 3725.062140] smpboot: Booting Node 0 Processor 11 APIC 0x1a [ 3725.064383] ACPI: \_SB_.PLTF.C016: Found 3 idle states [ 3725.064526] CPU11 is up [ 3725.064610] smpboot: Booting Node 0 Processor 12 APIC 0x1 [ 3725.067274] ACPI: \_SB_.PLTF.C001: Found 3 idle states [ 3725.067493] CPU12 is up [ 3725.067598] smpboot: Booting Node 0 Processor 13 APIC 0x3 [ 3725.069858] ACPI: \_SB_.PLTF.C003: Found 3 idle states [ 3725.070057] CPU13 is up [ 3725.070156] smpboot: Booting Node 0 Processor 14 APIC 0x5 [ 3725.072451] ACPI: \_SB_.PLTF.C005: Found 3 idle states [ 3725.072624] CPU14 is up [ 3725.072714] smpboot: Booting Node 0 Processor 15 APIC 0x7 [ 3725.074968] ACPI: \_SB_.PLTF.C007: Found 3 idle states [ 3725.075144] CPU15 is up [ 3725.075236] smpboot: Booting Node 0 Processor 16 APIC 0x9 [ 3725.077512] ACPI: \_SB_.PLTF.C009: Found 3 idle states [ 3725.077696] CPU16 is up [ 3725.077790] smpboot: Booting Node 0 Processor 17 APIC 0xb [ 3725.080047] ACPI: \_SB_.PLTF.C00B: Found 3 idle states [ 3725.080228] CPU17 is up [ 3725.080320] smpboot: Booting Node 0 Processor 18 APIC 0x11 [ 3725.082567] ACPI: \_SB_.PLTF.C00D: Found 3 idle states [ 3725.082806] CPU18 is up [ 3725.082891] smpboot: Booting Node 0 Processor 19 APIC 0x13 [ 3725.085131] ACPI: \_SB_.PLTF.C00F: Found 3 idle states [ 3725.085331] CPU19 is up [ 3725.085416] smpboot: Booting Node 0 Processor 20 APIC 0x15 [ 3725.087661] ACPI: \_SB_.PLTF.C011: Found 3 idle states [ 3725.087862] CPU20 is up [ 3725.087951] smpboot: Booting Node 0 Processor 21 APIC 0x17 [ 3725.090196] ACPI: \_SB_.PLTF.C013: Found 3 idle states [ 3725.090403] CPU21 is up [ 3725.090490] smpboot: Booting Node 0 Processor 22 APIC 0x19 [ 3725.092738] ACPI: \_SB_.PLTF.C015: Found 3 idle states [ 3725.092955] CPU22 is up [ 3725.093038] smpboot: Booting Node 0 Processor 23 APIC 0x1b [ 3725.095285] ACPI: \_SB_.PLTF.C017: Found 3 idle states [ 3725.095512] CPU23 is up [ 3725.100046] ACPI: PM: Waking up from system sleep state S4 [ 3725.145166] usb usb1: root hub lost power or was reset [ 3725.145169] usb usb2: root hub lost power or was reset [ 3725.145188] usb usb3: root hub lost power or was reset [ 3725.145190] usb usb4: root hub lost power or was reset [ 3725.145292] usb usb5: root hub lost power or was reset [ 3725.145295] usb usb6: root hub lost power or was reset [ 3725.145303] [drm] PCIE GART of 1024M enabled (table at 0x000000F41FC00000). [ 3725.145315] [drm] PSP is resuming... [ 3725.145324] usb usb7: root hub lost power or was reset [ 3725.145326] usb usb8: root hub lost power or was reset [ 3725.146658] xhci_hcd 0000:0d:00.0: USB3 root hub has no ports [ 3725.166950] [drm] reserve 0xa00000 from 0xf41e000000 for PSP TMR [ 3725.205177] sd 1:0:0:0: [sda] Starting disk [ 3725.363153] amdgpu 0000:0c:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 3725.368850] amdgpu 0000:0c:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 3725.368851] amdgpu 0000:0c:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available [ 3725.368852] amdgpu 0000:0c:00.0: amdgpu: SMU is resuming... [ 3725.368854] amdgpu 0000:0c:00.0: amdgpu: smu driver if version = 0x00000004, smu fw if version = 0x00000005, smu fw program = 0, smu fw version = 0x00544fdd (84.79.221) [ 3725.368855] amdgpu 0000:0c:00.0: amdgpu: SMU driver if version not matched [ 3725.369391] amdgpu 0000:0c:00.0: amdgpu: SMU is resumed successfully! [ 3725.370039] [drm] DMUB hardware initialized: version=0x05000500 [ 3725.452802] ata4: SATA link down (SStatus 0 SControl 300) [ 3725.452816] ata1: SATA link down (SStatus 0 SControl 300) [ 3725.452901] ata3: SATA link down (SStatus 0 SControl 300) [ 3725.469578] usb 7-1: reset full-speed USB device number 2 using xhci_hcd [ 3725.469585] usb 5-1: reset high-speed USB device number 2 using xhci_hcd [ 3725.479852] [drm] kiq ring mec 2 pipe 1 q 0 [ 3725.481950] [drm] VCN decode and encode initialized successfully(under DPG Mode). [ 3725.482570] [drm] JPEG decode initialized successfully. [ 3725.482577] amdgpu 0000:0c:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 [ 3725.482578] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 3725.482578] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 3725.482578] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 3725.482579] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 3725.482579] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 3725.482579] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 3725.482580] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 3725.482580] amdgpu 0000:0c:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 3725.482580] amdgpu 0000:0c:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 3725.482580] amdgpu 0000:0c:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0 [ 3725.482581] amdgpu 0000:0c:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 1 [ 3725.482581] amdgpu 0000:0c:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1 [ 3725.482582] amdgpu 0000:0c:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1 [ 3725.482582] amdgpu 0000:0c:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1 [ 3725.531760] usb 1-7: reset high-speed USB device number 3 using xhci_hcd [ 3725.663575] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3725.663830] ata2.00: supports DRM functions and may not be fully accessible [ 3725.666646] ata2.00: supports DRM functions and may not be fully accessible [ 3725.669308] ata2.00: configured for UDMA/133 [ 3725.669523] ata2.00: Enabling discard_zeroes_data [ 3725.902939] usb 1-3: reset high-speed USB device number 2 using xhci_hcd [ 3726.355757] usb 1-11: reset low-speed USB device number 5 using xhci_hcd [ 3726.971936] usb 1-12: reset low-speed USB device number 7 using xhci_hcd [ 3727.443865] usb 2-6: reset SuperSpeed USB device number 2 using xhci_hcd [ 3727.525957] usb 1-3.4: reset high-speed USB device number 4 using xhci_hcd [ 3728.039940] usb 1-3.4.1: reset high-speed USB device number 6 using xhci_hcd [ 3732.600207] usb 1-12: PM: dpm_run_callback(): usb_dev_restore+0x0/0x10 [usbcore] returns -5 [ 3732.600228] usb 1-12: PM: failed to restore async: error -5 [ 3732.600929] OOM killer enabled. [ 3732.600931] Restarting tasks ... [ 3732.600998] usb 1-12: USB disconnect, device number 7 [ 3732.602813] done. [ 3732.602818] PM: hibernation: hibernation exit [ 3732.859614] usb 1-12: new low-speed USB device number 8 using xhci_hcd [ 3733.173159] usb 1-12: New USB device found, idVendor=c0f4, idProduct=0201, bcdDevice= 1.00 [ 3733.173164] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3733.173166] usb 1-12: Product: HCT USB Entry Keyboard [ 3733.173167] usb 1-12: Manufacturer: Hengchangtong [ 3733.173168] usb 1-12: SerialNumber: ... [ 3733.208610] input: Hengchangtong HCT USB Entry Keyboard as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/0000:02:0c.0/0000:0a:00.0/usb1/1-12/1-12:1.0/0003:C0F4:0201.0005/input/input20 [ 3733.260792] hid-generic 0003:C0F4:0201.0005: input,hidraw2: USB HID v1.11 Keyboard [Hengchangtong HCT USB Entry Keyboard] on usb-0000:0a:00.0-12/input0 [ 3733.285428] input: Hengchangtong HCT USB Entry Keyboard Consumer Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/0000:02:0c.0/0000:0a:00.0/usb1/1-12/1-12:1.1/0003:C0F4:0201.0006/input/input21 [ 3733.336796] input: Hengchangtong HCT USB Entry Keyboard System Control as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/0000:02:0c.0/0000:0a:00.0/usb1/1-12/1-12:1.1/0003:C0F4:0201.0006/input/input22 [ 3733.336854] input: Hengchangtong HCT USB Entry Keyboard as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/0000:02:0c.0/0000:0a:00.0/usb1/1-12/1-12:1.1/0003:C0F4:0201.0006/input/input23 [ 3733.336906] hid-generic 0003:C0F4:0201.0006: input,hidraw3: USB HID v1.11 Keyboard [Hengchangtong HCT USB Entry Keyboard] on usb-0000:0a:00.0-12/input1 [ 3734.126478] wlp12s0f4u1: authenticate with DEB56E8343C451E8363EC0E785A3FDAB [ 3734.126487] wlp12s0f4u1: 80 MHz not supported, disabling VHT [ 3734.174986] wlp12s0f4u1: send auth to DEB56E8343C451E8363EC0E785A3FDAB (try 1/3) [ 3734.176703] wlp12s0f4u1: authenticated [ 3734.177593] wlp12s0f4u1: associate with DEB56E8343C451E8363EC0E785A3FDAB (try 1/3) [ 3734.182659] wlp12s0f4u1: RX AssocResp from DEB56E8343C451E8363EC0E785A3FDAB (capab=0x1411 status=0 aid=1) [ 3734.199368] wlp12s0f4u1: associated [ 3734.238400] wlp12s0f4u1: Limiting TX power to 20 (20 - 0) dBm as advertised by DEB56E8343C451E8363EC0E785A3FDAB [ 3734.238433] IPv6: ADDRCONF(NETDEV_CHANGE): wlp12s0f4u1: link becomes ready [ 7825.773409] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7825.896046] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9017.301743] FAT-fs (sdc1): error, fat_free_clusters: deleting FAT entry beyond EOF [ 9017.301747] FAT-fs (sdc1): Filesystem has been set read-only [10006.958701] lp: driver loaded but no devices found [10006.980154] ppdev: user-space parallel port driver [10061.362365] scp-dbus-servic[40625]: segfault at 10 ip 00007f0d26a4e8c0 sp 00007f0d1d84fe60 error 4 in libpython3.11.so.1.0[7f0d267cf000+352000] likely on CPU 13 (core 1, socket 0) [10061.362380] Code: 83 00 00 00 48 8b 4b f0 48 8b 43 08 48 8b 80 a8 00 00 00 48 85 c9 0f 85 84 00 00 00 48 8d 0d 57 87 1f 00 48 8b 89 40 02 00 00 <48> 8b 49 10 8b 91 b4 02 00 00 85 d2 7e 08 ff ca 89 91 b4 02 00 00 [10761.581288] usb 1-3.2: new high-speed USB device number 9 using xhci_hcd [10761.687879] usb 1-3.2: New USB device found, idVendor=04e8, idProduct=3321, bcdDevice= 1.00 [10761.687884] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [10761.687886] usb 1-3.2: Product: M2020 Series [10761.687887] usb 1-3.2: Manufacturer: Samsung Electronics Co., Ltd. [10761.687888] usb 1-3.2: SerialNumber: ... [10762.464936] usblp 1-3.2:1.0: usblp1: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321 [10762.464952] usbcore: registered new interface driver usblp [10767.789937] usblp1: removed [10767.806153] usblp 1-3.2:1.0: usblp1: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321 [10771.559802] usblp1: removed [10771.576280] usblp 1-3.2:1.0: usblp1: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321 [10789.305249] usblp1: removed [10799.588514] usblp 1-3.2:1.0: usblp1: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321 [10799.588580] usblp1: removed [10799.661543] usb 1-3.2: reset high-speed USB device number 9 using xhci_hcd [10799.765537] usblp 1-3.2:1.0: usblp1: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321 [20046.814464] usb 1-3.1: new high-speed USB device number 10 using xhci_hcd [20046.921139] usb 1-3.1: New USB device found, idVendor=03f0, idProduct=c111, bcdDevice= 1.00 [20046.921144] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [20046.921145] usb 1-3.1: Product: Deskjet 1510 series [20046.921147] usb 1-3.1: Manufacturer: HP [20046.921147] usb 1-3.1: SerialNumber: ... [20046.986183] usblp 1-3.1:1.1: usblp2: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC111 [20053.230846] usblp1: removed [20053.247744] usblp 1-3.2:1.0: usblp1: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321 [20053.247803] usblp2: removed [20053.272427] usblp 1-3.1:1.1: usblp2: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC111 [20764.990726] usb 1-3.1: USB disconnect, device number 10 [20764.990859] usblp2: removed [20774.561792] usb 1-5: new high-speed USB device number 11 using xhci_hcd [20774.774144] usb 1-5: New USB device found, idVendor=03f0, idProduct=c111, bcdDevice= 1.00 [20774.774149] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [20774.774151] usb 1-5: Product: Deskjet 1510 series [20774.774152] usb 1-5: Manufacturer: HP [20774.774153] usb 1-5: SerialNumber: ... [20774.838163] usblp 1-5:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC111 [20779.884314] usblp2: removed [20779.908380] usblp 1-5:1.1: usblp2: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC111 [20779.908441] usblp1: removed [20779.925370] usblp 1-3.2:1.0: usblp1: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3321 [21571.063465] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [21702.905400] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [22256.577607] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [22278.593937] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [22284.739024] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [22325.058647] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [22394.819673] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [22398.531723] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [22405.892827] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [22438.788340] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [22461.956673] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [22675.301086] usb 1-5: USB disconnect, device number 11 [22675.301244] usblp2: removed [22699.592204] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [23867.609557] ieee80211 phy0: rt2x00usb_watchdog_tx_dma: Warning - TX queue 2 DMA timed out, invoke forced reset [24326.457405] wlp12s0f4u1: deauthenticating from DEB56E8343C451E8363EC0E785A3FDAB by local choice (Reason: 3=DEAUTH_LEAVING) [24327.340232] zram0: detected capacity change from 15462400 to 0 [24327.881536] EXT4-fs (sdb3): unmounting filesystem HASH_5C4-56DF-01E4-C845-17F63E76BA47.