[ 0.000000] Linux version 6.2.0-34-generic (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.3.0-1ubuntu1~23.04) 12.3.0, GNU ld (GNU Binutils for Ubuntu) 2.40) #34-Ubuntu SMP PREEMPT_DYNAMIC Mon Sep 4 13:06:55 UTC 2023 (Ubuntu 6.2.0-34.34-generic 6.2.16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.2.0-34-generic root=UUID=HASH_611-D7BD-1345-1802-A3CC21B2C246 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008ef6efff] usable [ 0.000000] BIOS-e820: [mem 0x000000008ef6f000-0x0000000093f2efff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000093f2f000-0x0000000094b2efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000094b2f000-0x0000000094bfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000094bff000-0x0000000094bfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000094c00000-0x00000000991fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000099a00000-0x00000000a07fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000085f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by Lenovo [ 0.000000] efi: ACPI=0x94bfe000 ACPI 2.0=0x94bfe014 SMBIOS=0x90cbc000 SMBIOS 3.0=0x90caf000 TPMFinalLog=0x9498f000 MEMATTR=0x8ae8e018 ESRT=0x8ae95018 MOKvar=0x8f424000 RNG=0x94bfd018 TPMEventLog=0x671a2018 [ 0.000000] random: crng init done [ 0.000000] efi: Remove mem86: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: LENOVO 20XY005MGE/20XY005MGE, BIOS N32ET86W (1.62 ) 07/12/2023 [ 0.000000] tsc: Detected 2800.000 MHz processor [ 0.000000] tsc: Detected 2803.200 MHz TSC [ 0.000006] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000015] last_pfn = 0x85f800 max_arch_pfn = 0x400000000 [ 0.000020] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000664] last_pfn = 0x94c00 max_arch_pfn = 0x400000000 [ 0.012326] esrt: Reserving ESRT space from 0x000000008ae95018 to 0x000000008ae95280. [ 0.012333] e820: update [mem 0x8ae95000-0x8ae95fff] usable ==> reserved [ 0.012353] Using GB pages for direct mapping [ 0.012527] secureboot: Secure boot enabled [ 0.012527] RAMDISK: [mem 0x671af000-0x6b2f6fff] ACPI: Early table checksum verification disabled [ 0.012537] ACPI: RSDP 0x0000000094BFE014 000024 (v02 LENOVO) [ 0.012541] ACPI: XSDT 0x0000000094BFC188 00011C (v01 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012548] ACPI: FACP 0x0000000090C9F000 000114 (v06 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012554] ACPI: DSDT 0x0000000090C64000 03511F (v02 LENOVO ICL 00000002 01000013) [ 0.012557] ACPI: FACS 0x000000009496E000 000040 [ 0.012561] ACPI: SSDT 0x0000000090D4A000 00255D (v02 LENOVO CpuSsdt 00003000 INTL 20191018) [ 0.012564] ACPI: SSDT 0x0000000090D49000 00059B (v02 LENOVO CtdpB 00001000 INTL 20191018) [ 0.012567] ACPI: SSDT 0x0000000090CCF000 00400F (v02 LENOVO DptfTabl 00001000 INTL 20191018) [ 0.012571] ACPI: SSDT 0x0000000090CA2000 00060E (v02 LENOVO Tpm2Tabl 00001000 INTL 20191018) [ 0.012574] ACPI: TPM2 0x0000000090CA1000 00004C (v04 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012577] ACPI: ECDT 0x0000000090CA0000 000053 (v01 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012580] ACPI: HPET 0x0000000090C9E000 000038 (v01 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012584] ACPI: APIC 0x0000000090C9D000 00012C (v04 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012587] ACPI: SSDT 0x0000000090C9C000 000189 (v02 LENOVO PID0Ssdt 00000010 INTL 20191018) [ 0.012590] ACPI: SSDT 0x0000000090C9A000 0014F8 (v02 LENOVO ProjSsdt 00000010 INTL 20191018) [ 0.012594] ACPI: SSDT 0x0000000090C61000 002926 (v02 LENOVO TglU_Rvp 00001000 INTL 20191018) [ 0.012597] ACPI: NHLT 0x0000000090C5F000 001B80 (v00 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012600] ACPI: SSDT 0x0000000090C5B000 002CD7 (v02 LENOVO SaSsdt 00003000 INTL 20191018) [ 0.012604] ACPI: SSDT 0x0000000090C57000 003573 (v02 LENOVO IgfxSsdt 00003000 INTL 20191018) [ 0.012607] ACPI: SSDT 0x0000000090C4B000 00B6A1 (v02 LENOVO TcssSsdt 00001000 INTL 20191018) [ 0.012610] ACPI: LPIT 0x0000000090C49000 0000CC (v01 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012614] ACPI: WSMT 0x0000000090C48000 000028 (v01 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012617] ACPI: SSDT 0x0000000090C47000 00012A (v02 LENOVO TbtTypeC 00000000 INTL 20191018) [ 0.012620] ACPI: DBGP 0x0000000090C46000 000034 (v01 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012623] ACPI: DBG2 0x0000000090C45000 000054 (v00 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012627] ACPI: MSDM 0x0000000090C44000 000055 (v03 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012630] ACPI: SSDT 0x0000000090C2D000 000B9C (v02 LENOVO UsbCTabl 00001000 INTL 20191018) [ 0.012633] ACPI: BATB 0x0000000090C2C000 00004A (v02 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012636] ACPI: DMAR 0x000000008F42A000 0000B8 (v02 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012640] ACPI: MCFG 0x000000008F429000 00003C (v01 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012643] ACPI: SSDT 0x000000008F428000 000144 (v02 LENOVO ADebTabl 00001000 INTL 20191018) [ 0.012646] ACPI: BGRT 0x0000000090C2E000 000038 (v01 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012650] ACPI: PTDT 0x000000008F427000 000986 (v00 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012653] ACPI: UEFI 0x00000000940C2000 00008A (v01 LENOVO TP-N32 00001620 PTEC 00000002) [ 0.012656] ACPI: FPDT 0x000000008F425000 000034 (v01 LENOVO TP-N32 00001620 PTEC 00001620) [ 0.012659] ACPI: Reserving FACP table memory at [mem 0x90c9f000-0x90c9f113] ACPI: Reserving DSDT table memory at [mem 0x90c64000-0x90c9911e] ACPI: Reserving FACS table memory at [mem 0x9496e000-0x9496e03f] ACPI: Reserving SSDT table memory at [mem 0x90d4a000-0x90d4c55c] ACPI: Reserving SSDT table memory at [mem 0x90d49000-0x90d4959a] ACPI: Reserving SSDT table memory at [mem 0x90ccf000-0x90cd300e] ACPI: Reserving SSDT table memory at [mem 0x90ca2000-0x90ca260d] ACPI: Reserving TPM2 table memory at [mem 0x90ca1000-0x90ca104b] ACPI: Reserving ECDT table memory at [mem 0x90ca0000-0x90ca0052] ACPI: Reserving HPET table memory at [mem 0x90c9e000-0x90c9e037] ACPI: Reserving APIC table memory at [mem 0x90c9d000-0x90c9d12b] ACPI: Reserving SSDT table memory at [mem 0x90c9c000-0x90c9c188] ACPI: Reserving SSDT table memory at [mem 0x90c9a000-0x90c9b4f7] ACPI: Reserving SSDT table memory at [mem 0x90c61000-0x90c63925] ACPI: Reserving NHLT table memory at [mem 0x90c5f000-0x90c60b7f] ACPI: Reserving SSDT table memory at [mem 0x90c5b000-0x90c5dcd6] ACPI: Reserving SSDT table memory at [mem 0x90c57000-0x90c5a572] ACPI: Reserving SSDT table memory at [mem 0x90c4b000-0x90c566a0] ACPI: Reserving LPIT table memory at [mem 0x90c49000-0x90c490cb] ACPI: Reserving WSMT table memory at [mem 0x90c48000-0x90c48027] ACPI: Reserving SSDT table memory at [mem 0x90c47000-0x90c47129] ACPI: Reserving DBGP table memory at [mem 0x90c46000-0x90c46033] ACPI: Reserving DBG2 table memory at [mem 0x90c45000-0x90c45053] ACPI: Reserving MSDM table memory at [mem 0x90c44000-0x90c44054] ACPI: Reserving SSDT table memory at [mem 0x90c2d000-0x90c2db9b] ACPI: Reserving BATB table memory at [mem 0x90c2c000-0x90c2c049] ACPI: Reserving DMAR table memory at [mem 0x8f42a000-0x8f42a0b7] ACPI: Reserving MCFG table memory at [mem 0x8f429000-0x8f42903b] ACPI: Reserving SSDT table memory at [mem 0x8f428000-0x8f428143] ACPI: Reserving BGRT table memory at [mem 0x90c2e000-0x90c2e037] ACPI: Reserving PTDT table memory at [mem 0x8f427000-0x8f427985] ACPI: Reserving UEFI table memory at [mem 0x940c2000-0x940c2089] ACPI: Reserving FPDT table memory at [mem 0x8f425000-0x8f425033] No NUMA configuration found [ 0.012955] Faking a node at [mem 0x0000000000000000-0x000000085f7fffff] NODE_DATA(0) allocated [mem 0x85f7d5000-0x85f7fffff] Zone ranges: [ 0.013150] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000085f7fffff] Device empty [ 0.013156] Movable zone start for each node [ 0.013157] Early memory node ranges [ 0.013158] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x000000008ef6efff] node 0: [mem 0x0000000094bff000-0x0000000094bfffff] node 0: [mem 0x0000000100000000-0x000000085f7fffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000085f7fffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013203] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.016903] On node 0, zone DMA32: 23696 pages in unavailable ranges [ 0.059697] On node 0, zone Normal: 13312 pages in unavailable ranges [ 0.059712] On node 0, zone Normal: 2048 pages in unavailable ranges [ 0.059733] Reserving Intel graphics memory at [mem 0x9c800000-0xa07fffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.060373] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.060374] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.060375] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.060376] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.060377] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.060377] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.060378] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.060379] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.060380] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.060380] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.060381] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.060382] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.060383] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.060383] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.060384] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.060385] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.060423] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.060426] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.060428] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.060436] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.060442] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.060450] e820: update [mem 0x8a6f5000-0x8a935fff] usable ==> reserved [ 0.060459] TSC deadline timer available [ 0.060460] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.060473] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x8a6f5000-0x8a935fff] PM: hibernation: Registered nosave memory: [mem 0x8ae95000-0x8ae95fff] PM: hibernation: Registered nosave memory: [mem 0x8ef6f000-0x93f2efff] PM: hibernation: Registered nosave memory: [mem 0x93f2f000-0x94b2efff] PM: hibernation: Registered nosave memory: [mem 0x94b2f000-0x94bfefff] PM: hibernation: Registered nosave memory: [mem 0x94c00000-0x991fffff] PM: hibernation: Registered nosave memory: [mem 0x99200000-0x999fffff] PM: hibernation: Registered nosave memory: [mem 0x99a00000-0xa07fffff] PM: hibernation: Registered nosave memory: [mem 0xa0800000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] [mem 0xa0800000-0xfed1ffff] available for PCI devices [ 0.060489] Booting paravirtualized kernel on bare hardware [ 0.060491] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.060498] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.060808] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144 [ 0.060814] pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152 [ 0.060816] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.060841] Fallback order for Node 0: 0 [ 0.060844] Built 1 zonelists, mobility grouping on. Total pages: 8186578 [ 0.060845] Policy zone: Normal [ 0.060846] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.2.0-34-generic root=UUID=HASH_611-D7BD-1345-1802-A3CC21B2C246 ro quiet splash vt.handoff=7 [ 0.060919] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.2.0-34-generic", will be passed to user space. [ 0.063640] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.065033] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.065163] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.065177] software IO TLB: area num 8. [ 0.131393] Memory: 32374704K/33266744K available (20480K kernel code, 4156K rwdata, 13004K rodata, 4764K init, 17536K bss, 891780K reserved, 0K cma-reserved) [ 0.131497] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.131523] ftrace: allocating 53267 entries in 209 pages [ 0.141220] ftrace: allocated 209 pages with 4 groups [ 0.142099] Dynamic Preempt: voluntary [ 0.142129] rcu: Preemptible hierarchical RCU implementation. [ 0.142130] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.142131] Trampoline variant of Tasks RCU enabled. [ 0.142132] Rude variant of Tasks RCU enabled. [ 0.142133] Tracing variant of Tasks RCU enabled. [ 0.142133] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.142134] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.144827] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.145114] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.145343] Console: colour dummy device 80x25 [ 0.145346] printk: console [tty0] enabled [ 0.145383] ACPI: Core revision 20221020 [ 0.145684] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.145685] APIC: Switch to symmetric I/O mode setup [ 0.145687] DMAR: Host address width 39 [ 0.145688] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.145694] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e [ 0.145697] DMAR: DRHD base: 0x000000fed85000 flags: 0x0 [ 0.145702] DMAR: dmar1: reg_base_addr fed85000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.145704] DMAR: DRHD base: 0x000000fed86000 flags: 0x0 [ 0.145708] DMAR: dmar2: reg_base_addr fed86000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.145710] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.145716] DMAR: dmar3: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.145718] DMAR: RMRR base: 0x0000009c000000 end: 0x000000a07fffff [ 0.145720] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 3 [ 0.145722] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.145723] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.148098] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.148100] x2apic enabled [ 0.148136] Switched APIC routing to cluster x2apic. [ 0.153313] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x28680fa287f, max_idle_ns: 440795281151 ns [ 0.153323] Calibrating delay loop (skipped), value calculated using timer frequency.. 5606.40 BogoMIPS (lpj=11212800) [ 0.153357] CPU0: Thermal monitoring enabled (TM1) [ 0.153359] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.153505] process: using mwait in idle threads [ 0.153507] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.153508] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.153512] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.153515] Spectre V2 : Mitigation: Enhanced IBRS [ 0.153515] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.153516] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 0.153518] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.153520] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.153522] GDS: Mitigation: Microcode [ 0.153530] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.153532] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.153533] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.153534] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.153535] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.153536] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.153536] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.153538] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.153539] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 [ 0.153540] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 [ 0.153542] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 [ 0.153543] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 [ 0.153544] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. [ 0.157318] Freeing SMP alternatives memory: 44K [ 0.157318] pid_max: default: 32768 minimum: 301 [ 0.157318] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor [ 0.157318] landlock: Up and running. [ 0.157318] Yama: becoming mindful. [ 0.157318] AppArmor: AppArmor initialized [ 0.157318] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.157318] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.157318] smpboot: CPU0: 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz (family: 0x6, model: 0x8c, stepping: 0x1) [ 0.157318] cblist_init_generic: Setting adjustable number of callback queues. [ 0.157318] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.157318] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.157318] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.157318] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.157318] ... version: 5 [ 0.157318] ... bit width: 48 [ 0.157318] ... generic registers: 8 [ 0.157318] ... value mask: 0000ffffffffffff [ 0.157318] ... max period: 00007fffffffffff [ 0.157318] ... fixed-purpose events: 4 [ 0.157318] ... event mask: 0001000f000000ff [ 0.157318] signal: max sigframe size: 3632 [ 0.157318] Estimated ratio of average max frequency by base frequency (times 1024): 1499 [ 0.157318] rcu: Hierarchical SRCU implementation. [ 0.157318] rcu: Max phase no-delay instances is 1000. [ 0.157318] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.157318] smp: Bringing up secondary CPUs ... [ 0.157318] x86: Booting SMP configuration: [ 0.157318] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.183812] smp: Brought up 1 node, 8 CPUs [ 0.183812] smpboot: Max logical packages: 1 [ 0.183812] smpboot: Total of 8 processors activated (44851.20 BogoMIPS) [ 0.186693] devtmpfs: initialized [ 0.186693] x86/mm: Memory block size: 128MB [ 0.190124] ACPI: PM: Registering ACPI NVS region [mem 0x93f2f000-0x94b2efff] (12582912 bytes) [ 0.190124] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.190124] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.190124] pinctrl core: initialized pinctrl subsystem [ 0.190124] PM: RTC time: 10:29:58, date: 2023-10-08 [ 0.190290] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.190701] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.191026] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.193489] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.193502] thermal_sys: Registered thermal governor 'fair_share' [ 0.193502] thermal_sys: Registered thermal governor 'bang_bang' [ 0.193502] thermal_sys: Registered thermal governor 'step_wise' [ 0.193502] thermal_sys: Registered thermal governor 'user_space' [ 0.193502] thermal_sys: Registered thermal governor 'power_allocator' [ 0.193502] EISA bus registered [ 0.193502] cpuidle: using governor ladder [ 0.193502] cpuidle: using governor menu [ 0.193502] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.193502] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.193531] PCI: MMCONFIG for domain 0000 [bus 00-79] at [mem 0xc0000000-0xc79fffff] (base 0xc0000000) [ 0.193537] PCI: not using MMCONFIG [ 0.193539] PCI: Using configuration type 1 for base access [ 0.193737] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.193744] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.193744] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.193744] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.193744] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.193744] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.193744] ACPI: Added _OSI(Module Device) [ 0.193744] ACPI: Added _OSI(Processor Device) [ 0.193744] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.193744] ACPI: Added _OSI(Processor Aggregator Device) [ 0.310842] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.326839] ACPI: 14 ACPI AML tables successfully acquired and loaded [ 0.329554] ACPI: EC: EC started [ 0.329555] ACPI: EC: interrupt blocked [ 0.330320] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.330321] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.351318] ACPI: Dynamic OEM Table Load: [ 0.351328] ACPI: SSDT 0xFFFF9D61802DA600 0001CB (v02 PmRef Cpu0Psd 00003000 INTL 20191018) [ 0.352001] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.353967] ACPI: Dynamic OEM Table Load: [ 0.353973] ACPI: SSDT 0xFFFF9D6181A6AC00 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20191018) [ 0.354786] ACPI: Dynamic OEM Table Load: [ 0.354791] ACPI: SSDT 0xFFFF9D6181A8E000 000647 (v02 PmRef Cpu0Ist 00003000 INTL 20191018) [ 0.355673] ACPI: Dynamic OEM Table Load: [ 0.355678] ACPI: SSDT 0xFFFF9D6181A68400 00028B (v02 PmRef Cpu0Hwp 00003000 INTL 20191018) [ 0.357917] ACPI: Dynamic OEM Table Load: [ 0.357922] ACPI: SSDT 0xFFFF9D6181A95000 0008E7 (v02 PmRef ApIst 00003000 INTL 20191018) [ 0.358841] ACPI: Dynamic OEM Table Load: [ 0.358845] ACPI: SSDT 0xFFFF9D6181A89000 00048A (v02 PmRef ApHwp 00003000 INTL 20191018) [ 0.359683] ACPI: Dynamic OEM Table Load: [ 0.359688] ACPI: SSDT 0xFFFF9D6181A8D800 0004D4 (v02 PmRef ApPsd 00003000 INTL 20191018) [ 0.361824] ACPI: Dynamic OEM Table Load: [ 0.361828] ACPI: SSDT 0xFFFF9D6181A8C000 00048A (v02 PmRef ApCst 00003000 INTL 20191018) [ 0.366046] ACPI: Interpreter enabled [ 0.366089] ACPI: PM: (supports S0 S3 S4 S5) [ 0.366090] ACPI: Using IOAPIC for interrupt routing [ 0.367137] PCI: MMCONFIG for domain 0000 [bus 00-79] at [mem 0xc0000000-0xc79fffff] (base 0xc0000000) [ 0.367636] PCI: MMCONFIG at [mem 0xc0000000-0xc79fffff] reserved as ACPI motherboard resource [ 0.367643] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.367644] PCI: Ignoring E820 reservations for host bridge windows [ 0.367977] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.370070] ACPI: \_SB_.PC00.PEG0.PXP_: New power resource [ 0.373322] ACPI: \_SB_.PC00.LPCB.EC__.PUBS: New power resource [ 0.377583] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTPR: New power resource [ 0.378861] ACPI: \_SB_.PC00.RP01.PXP5: New power resource [ 0.379143] ACPI: \_SB_.PC00.RP01.PXSX.MRST: New power resource [ 0.379156] ACPI: \_SB_.PC00.RP01.PXSX.DRST: New power resource [ 0.379928] ACPI: \_SB_.PC00.RP05.PXP_: New power resource [ 0.387121] ACPI: \_SB_.PC00.SAT0.VOL0.V0PR: New power resource [ 0.387221] ACPI: \_SB_.PC00.SAT0.VOL1.V1PR: New power resource [ 0.387316] ACPI: \_SB_.PC00.SAT0.VOL2.V2PR: New power resource [ 0.390406] ACPI: \_SB_.PC00.CNVW.WRST: New power resource [ 0.390580] ACPI: \_SB_.PC00.TBT0: New power resource [ 0.390610] ACPI: \_SB_.PC00.TBT1: New power resource [ 0.390636] ACPI: \_SB_.PC00.D3C_: New power resource [ 0.634925] ACPI: \PIN_: New power resource [ 0.634952] ACPI: \PINP: New power resource [ 0.635620] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-79]) [ 0.635628] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [AER] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.649584] PCI host bridge to bus 0000:00 [ 0.649585] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0xa0800000-0xbfffffff window] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:00: root bus resource [bus 00-79] pci 0000:00:00.0: [8086:9a14] type 00 class 0x060000 [ 0.770454] pci 0000:00:02.0: [8086:9a49] type 00 class 0x030000 [ 0.770467] pci 0000:00:02.0: reg 0x10: [mem 0x603c000000-0x603cffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.770510] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.770514] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs) [ 0.770565] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs) [ 0.770840] pci 0000:00:04.0: [8086:9a03] type 00 class 0x118000 [ 0.770861] pci 0000:00:04.0: reg 0x10: [mem 0x603d180000-0x603d19ffff 64bit] pci 0000:00:06.0: [8086:9a09] type 01 class 0x060400 [ 0.771695] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.771743] pci 0000:00:06.0: PTM enabled (root), 4ns granularity [ 0.774079] pci 0000:00:07.0: [8086:9a25] type 01 class 0x060400 [ 0.774143] pci 0000:00:07.0: Overriding RP PIO Log Size to 4 [ 0.774247] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.775664] pci 0000:00:07.2: [8086:9a27] type 01 class 0x060400 [ 0.775726] pci 0000:00:07.2: Overriding RP PIO Log Size to 4 [ 0.775827] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold [ 0.778533] pci 0000:00:08.0: [8086:9a11] type 00 class 0x088000 [ 0.778545] pci 0000:00:08.0: reg 0x10: [mem 0x603d1ec000-0x603d1ecfff 64bit] pci 0000:00:0a.0: [8086:9a0d] type 00 class 0x118000 [ 0.778681] pci 0000:00:0a.0: reg 0x10: [mem 0x603d1d0000-0x603d1d7fff 64bit] pci 0000:00:0a.0: enabling Extended Tags [ 0.778827] pci 0000:00:0d.0: [8086:9a13] type 00 class 0x0c0330 [ 0.778844] pci 0000:00:0d.0: reg 0x10: [mem 0x603d1c0000-0x603d1cffff 64bit] pci 0000:00:0d.0: PME# supported from D3hot D3cold [ 0.779561] pci 0000:00:0d.2: [8086:9a1b] type 00 class 0x0c0340 [ 0.779577] pci 0000:00:0d.2: reg 0x10: [mem 0x603d140000-0x603d17ffff 64bit] pci 0000:00:0d.2: reg 0x18: [mem 0x603d1eb000-0x603d1ebfff 64bit] pci 0000:00:0d.2: supports D1 D2 [ 0.779639] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.779864] pci 0000:00:0d.3: [8086:9a1d] type 00 class 0x0c0340 [ 0.779880] pci 0000:00:0d.3: reg 0x10: [mem 0x603d100000-0x603d13ffff 64bit] pci 0000:00:0d.3: reg 0x18: [mem 0x603d1ea000-0x603d1eafff 64bit] pci 0000:00:0d.3: supports D1 D2 [ 0.779941] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.781495] pci 0000:00:12.0: [8086:a0fc] type 00 class 0x070000 [ 0.781519] pci 0000:00:12.0: reg 0x10: [mem 0x603d1b0000-0x603d1bffff 64bit] pci 0000:00:12.0: PME# supported from D0 D3hot [ 0.782167] pci 0000:00:14.0: [8086:a0ed] type 00 class 0x0c0330 [ 0.782193] pci 0000:00:14.0: reg 0x10: [mem 0x603d1a0000-0x603d1affff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.782969] pci 0000:00:14.2: [8086:a0ef] type 00 class 0x050000 [ 0.782990] pci 0000:00:14.2: reg 0x10: [mem 0x603d1e0000-0x603d1e3fff 64bit] pci 0000:00:14.2: reg 0x18: [mem 0x603d1e9000-0x603d1e9fff 64bit] pci 0000:00:14.3: [8086:a0f0] type 00 class 0x028000 [ 0.783179] pci 0000:00:14.3: reg 0x10: [mem 0x603d1dc000-0x603d1dffff 64bit] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.783570] pci 0000:00:15.0: [8086:a0e8] type 00 class 0x0c8000 [ 0.783642] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] pci 0000:00:15.1: [8086:a0e9] type 00 class 0x0c8000 [ 0.785512] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] pci 0000:00:15.3: [8086:a0eb] type 00 class 0x0c8000 [ 0.786084] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] pci 0000:00:16.0: [8086:a0e0] type 00 class 0x078000 [ 0.786583] pci 0000:00:16.0: reg 0x10: [mem 0x603d1e5000-0x603d1e5fff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.787024] pci 0000:00:1c.0: [8086:a0b8] type 01 class 0x060400 [ 0.787128] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.787167] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity [ 0.787714] pci 0000:00:1f.0: [8086:a082] type 00 class 0x060100 [ 0.789388] pci 0000:00:1f.3: [8086:a0c8] type 00 class 0x040380 [ 0.789436] pci 0000:00:1f.3: reg 0x10: [mem 0x603d1d8000-0x603d1dbfff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0x603d000000-0x603d0fffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.789908] pci 0000:00:1f.4: [8086:a0a3] type 00 class 0x0c0500 [ 0.789929] pci 0000:00:1f.4: reg 0x10: [mem 0x603d1e4000-0x603d1e40ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] pci 0000:00:1f.5: [8086:a0a4] type 00 class 0x0c8000 [ 0.790239] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] pci 0000:04:00.0: [1344:5407] type 00 class 0x010802 [ 0.790660] pci 0000:04:00.0: reg 0x10: [mem 0xbc300000-0xbc303fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.790822] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xbc300000-0xbc3fffff] pci 0000:00:07.0: PCI bridge to [bus 20-49] pci 0000:00:07.0: bridge window [mem 0xb0000000-0xbc1fffff] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] pci 0000:00:07.2: PCI bridge to [bus 50-79] pci 0000:00:07.2: bridge window [mem 0xa2000000-0xae1fffff] pci 0000:00:07.2: bridge window [mem 0x6020000000-0x603bffffff 64bit pref] pci 0000:08:00.0: [105b:e0ab] type 00 class 0x0d4000 [ 0.790976] pci 0000:08:00.0: reg 0x10: [mem 0xbc200000-0xbc200fff 64bit] pci 0000:08:00.0: reg 0x18: [mem 0xbc201000-0xbc201fff 64bit] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.791198] pci 0000:08:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.506 Gb/s with 16.0 GT/s PCIe x2 link) [ 0.791911] pci 0000:00:1c.0: PCI bridge to [bus 08] pci 0000:00:1c.0: bridge window [mem 0xbc200000-0xbc2fffff] ACPI: EC: interrupt unblocked [ 0.798643] ACPI: EC: event unblocked [ 0.798661] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.798662] ACPI: EC: GPE=0x6e [ 0.798662] ACPI: \_SB_.PC00.LPCB.EC__: Boot ECDT EC initialization complete [ 0.798664] ACPI: \_SB_.PC00.LPCB.EC__: EC: Used to handle transactions and events [ 0.798714] iommu: Default domain type: Translated [ 0.798714] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.798714] SCSI subsystem initialized [ 0.798714] libata version 3.00 loaded. [ 0.798714] ACPI: bus type USB registered [ 0.798714] usbcore: registered new interface driver usbfs [ 0.798714] usbcore: registered new interface driver hub [ 0.798714] usbcore: registered new device driver usb [ 0.798714] pps_core: LinuxPPS API ver. 1 registered [ 0.798714] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.798714] PTP clock support registered [ 0.798714] EDAC MC: Ver: 3.0.0 [ 0.798714] Registered efivars operations [ 0.801532] NetLabel: Initializing [ 0.801535] NetLabel: domain hash size = 128 [ 0.801536] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.801549] NetLabel: unlabeled traffic allowed by default [ 0.801559] mctp: management component transport protocol core [ 0.801559] NET: Registered PF_MCTP protocol family [ 0.801559] PCI: Using ACPI for IRQ routing [ 0.809335] PCI: pci_cache_line_size set to 64 bytes [ 0.809453] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window [ 0.809561] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] e820: reserve RAM buffer [mem 0x8a6f5000-0x8bffffff] e820: reserve RAM buffer [mem 0x8ae95000-0x8bffffff] e820: reserve RAM buffer [mem 0x8ef6f000-0x8fffffff] e820: reserve RAM buffer [mem 0x94c00000-0x97ffffff] e820: reserve RAM buffer [mem 0x85f800000-0x85fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.809584] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.809584] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 0.809584] vgaarb: loaded [ 0.810431] clocksource: Switched to clocksource tsc-early [ 0.815494] VFS: Disk quotas dquot_6.6.0 [ 0.815506] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.815587] AppArmor: AppArmor Filesystem Enabled [ 0.815615] pnp: PnP ACPI init [ 0.816417] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.816419] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.816510] system 00:01: [io 0x1854-0x1857] has been reserved [ 0.816553] pnp 00:04: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] system 00:04: [io 0x1800-0x189f] could not be reserved [ 0.816579] system 00:04: [io 0x0800-0x087f] has been reserved [ 0.816580] system 00:04: [io 0x0880-0x08ff] has been reserved [ 0.816581] system 00:04: [io 0x0900-0x097f] has been reserved [ 0.816582] system 00:04: [io 0x0980-0x09ff] has been reserved [ 0.816582] system 00:04: [io 0x0a00-0x0a7f] has been reserved [ 0.816583] system 00:04: [io 0x0a80-0x0aff] has been reserved [ 0.816584] system 00:04: [io 0x0b00-0x0b7f] has been reserved [ 0.816585] system 00:04: [io 0x0b80-0x0bff] has been reserved [ 0.816586] system 00:04: [io 0x15e0-0x15ef] has been reserved [ 0.816587] system 00:04: [io 0x1600-0x167f] could not be reserved [ 0.816588] system 00:04: [io 0x1640-0x165f] could not be reserved [ 0.816589] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.816590] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.816591] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.816592] system 00:04: [mem 0xfeb00000-0xfebfffff] has been reserved [ 0.816593] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.816593] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.817171] pnp 00:05: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] system 00:05: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 0.817186] system 00:05: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.817187] system 00:05: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.817188] system 00:05: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.817189] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.817190] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.817191] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.817598] system 00:06: [io 0x1800-0x18fe] could not be reserved [ 0.817599] system 00:06: [mem 0xfe000000-0xfe01ffff] has been reserved [ 0.817600] system 00:06: [mem 0xfe04c000-0xfe04ffff] has been reserved [ 0.817601] system 00:06: [mem 0xfe050000-0xfe0affff] has been reserved [ 0.817601] system 00:06: [mem 0xfe0d0000-0xfe0fffff] has been reserved [ 0.817602] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.817603] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.817604] system 00:06: [mem 0xfd000000-0xfd68ffff] has been reserved [ 0.817605] system 00:06: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 0.817606] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.817833] system 00:07: [io 0x2000-0x20fe] has been reserved [ 0.818231] pnp 00:09: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff] pnp 00:09: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff] pnp 00:09: disabling [mem 0x000d0000-0x000d3fff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff] pnp 00:09: disabling [mem 0x000d8000-0x000dbfff] because it overlaps 0000:00:02.0 BAR 6 [mem 0x000c0000-0x000dffff] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit] pnp 00:09: disabling [mem 0x000c0000-0x000c3fff disabled] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit] pnp 00:09: disabling [mem 0x000c8000-0x000cbfff disabled] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit] pnp 00:09: disabling [mem 0x000d0000-0x000d3fff disabled] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit] pnp 00:09: disabling [mem 0x000d8000-0x000dbfff disabled] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit] pnp 00:09: disabling [mem 0x000e0000-0x000e3fff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit] pnp 00:09: disabling [mem 0x000e8000-0x000ebfff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit] pnp 00:09: disabling [mem 0x00100000-0xa07fffff] because it overlaps 0000:00:02.0 BAR 7 [mem 0x00000000-0x06ffffff 64bit] pnp 00:09: disabling [mem 0x00000000-0x0009ffff disabled] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] pnp 00:09: disabling [mem 0x000c0000-0x000c3fff disabled] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] pnp 00:09: disabling [mem 0x000c8000-0x000cbfff disabled] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] pnp 00:09: disabling [mem 0x000d0000-0x000d3fff disabled] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] pnp 00:09: disabling [mem 0x000d8000-0x000dbfff disabled] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] pnp 00:09: disabling [mem 0x000e0000-0x000e3fff disabled] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] pnp 00:09: disabling [mem 0x000e8000-0x000ebfff disabled] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] pnp 00:09: disabling [mem 0x000f0000-0x000fffff disabled] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] pnp 00:09: disabling [mem 0x00100000-0xa07fffff disabled] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] system 00:09: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.818268] system 00:09: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.818377] pnp: PnP ACPI: found 10 devices [ 0.823533] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.823572] NET: Registered PF_INET protocol family [ 0.823744] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.825658] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.825690] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.825865] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.826163] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.826307] TCP: Hash tables configured (established 262144 bind 65536) [ 0.826412] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.826475] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.826535] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.826589] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.826595] NET: Registered PF_XDP protocol family [ 0.826601] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 [ 0.826609] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit] pci 0000:00:07.0: BAR 13: assigned [io 0x4000-0x4fff] pci 0000:00:07.2: BAR 13: assigned [io 0x5000-0x5fff] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit] pci 0000:00:15.1: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit] pci 0000:00:15.3: BAR 0: assigned [mem 0x4017002000-0x4017002fff 64bit] pci 0000:00:1f.5: BAR 0: assigned [mem 0xa0800000-0xa0800fff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xbc300000-0xbc3fffff] pci 0000:00:07.0: PCI bridge to [bus 20-49] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] pci 0000:00:07.0: bridge window [mem 0xb0000000-0xbc1fffff] pci 0000:00:07.0: bridge window [mem 0x6000000000-0x601bffffff 64bit pref] pci 0000:00:07.2: PCI bridge to [bus 50-79] pci 0000:00:07.2: bridge window [io 0x5000-0x5fff] pci 0000:00:07.2: bridge window [mem 0xa2000000-0xae1fffff] pci 0000:00:07.2: bridge window [mem 0x6020000000-0x603bffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 08] pci 0000:00:1c.0: bridge window [mem 0xbc200000-0xbc2fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0xa0800000-0xbfffffff window] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:04: resource 1 [mem 0xbc300000-0xbc3fffff] pci_bus 0000:20: resource 0 [io 0x4000-0x4fff] pci_bus 0000:20: resource 1 [mem 0xb0000000-0xbc1fffff] pci_bus 0000:20: resource 2 [mem 0x6000000000-0x601bffffff 64bit pref] pci_bus 0000:50: resource 0 [io 0x5000-0x5fff] pci_bus 0000:50: resource 1 [mem 0xa2000000-0xae1fffff] pci_bus 0000:50: resource 2 [mem 0x6020000000-0x603bffffff 64bit pref] pci_bus 0000:08: resource 1 [mem 0xbc200000-0xbc2fffff] PCI: CLS 64 bytes, default 64 [ 0.827281] DMAR: Intel-IOMMU force enabled due to platform opt in [ 0.827287] DMAR: No ATSR found [ 0.827288] DMAR: No SATC found [ 0.827289] DMAR: IOMMU feature fl1gp_support inconsistent [ 0.827290] DMAR: IOMMU feature pgsel_inv inconsistent [ 0.827290] DMAR: IOMMU feature nwfs inconsistent [ 0.827291] DMAR: IOMMU feature dit inconsistent [ 0.827291] DMAR: IOMMU feature sc_support inconsistent [ 0.827292] DMAR: IOMMU feature dev_iotlb_support inconsistent [ 0.827292] DMAR: dmar2: Using Queued invalidation [ 0.827294] DMAR: dmar1: Using Queued invalidation [ 0.827296] DMAR: dmar0: Using Queued invalidation [ 0.827297] DMAR: dmar3: Using Queued invalidation [ 0.827323] Trying to unpack rootfs image as initramfs... [ 0.827442] pci 0000:00:07.2: Adding to iommu group 0 [ 0.827463] pci 0000:00:07.0: Adding to iommu group 1 [ 0.827480] pci 0000:00:02.0: Adding to iommu group 2 [ 0.827498] pci 0000:00:00.0: Adding to iommu group 3 [ 0.827503] pci 0000:00:04.0: Adding to iommu group 4 [ 0.827509] pci 0000:00:06.0: Adding to iommu group 5 [ 0.827514] pci 0000:00:08.0: Adding to iommu group 6 [ 0.827520] pci 0000:00:0a.0: Adding to iommu group 7 [ 0.827531] pci 0000:00:0d.0: Adding to iommu group 8 [ 0.827536] pci 0000:00:0d.2: Adding to iommu group 8 [ 0.827541] pci 0000:00:0d.3: Adding to iommu group 8 [ 0.827548] pci 0000:00:12.0: Adding to iommu group 9 [ 0.827558] pci 0000:00:14.0: Adding to iommu group 10 [ 0.827563] pci 0000:00:14.2: Adding to iommu group 10 [ 0.827568] pci 0000:00:14.3: Adding to iommu group 11 [ 0.827579] pci 0000:00:15.0: Adding to iommu group 12 [ 0.827584] pci 0000:00:15.1: Adding to iommu group 12 [ 0.827590] pci 0000:00:15.3: Adding to iommu group 12 [ 0.827597] pci 0000:00:16.0: Adding to iommu group 13 [ 0.827605] pci 0000:00:1c.0: Adding to iommu group 14 [ 0.827617] pci 0000:00:1f.0: Adding to iommu group 15 [ 0.827623] pci 0000:00:1f.3: Adding to iommu group 15 [ 0.827629] pci 0000:00:1f.4: Adding to iommu group 15 [ 0.827636] pci 0000:00:1f.5: Adding to iommu group 15 [ 0.827642] pci 0000:04:00.0: Adding to iommu group 16 [ 0.827650] pci 0000:08:00.0: Adding to iommu group 17 [ 0.827743] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.827743] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.827744] software IO TLB: mapped [mem 0x00000000855e4000-0x00000000895e4000] (64MB) [ 0.827793] resource: resource sanity check: requesting [mem 0x00000000fedc0000-0x00000000fedcdfff], which spans more than pnp 00:05 [mem 0xfedc0000-0xfedc7fff] caller __uncore_imc_init_box+0xcb/0x150 mapping multiple BARs [ 0.836170] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28680fa287f, max_idle_ns: 440795281151 ns [ 0.836324] clocksource: Switched to clocksource tsc [ 0.836344] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.836650] Initialise system trusted keyrings [ 0.836658] Key type blacklist registered [ 0.836692] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.836699] zbud: loaded [ 0.836820] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.836858] fuse: init (API version 7.38) [ 0.836927] integrity: Platform Keyring initialized [ 0.836930] integrity: Machine keyring initialized [ 0.843655] Key type asymmetric registered [ 0.843657] Asymmetric key parser 'x509' registered [ 0.843666] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.843704] io scheduler mq-deadline registered [ 0.844065] pcieport 0000:00:06.0: PME: Signaling with IRQ 124 [ 0.844235] pcieport 0000:00:07.0: PME: Signaling with IRQ 125 [ 0.844248] pcieport 0000:00:07.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.844523] pcieport 0000:00:07.2: PME: Signaling with IRQ 126 [ 0.844536] pcieport 0000:00:07.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.844756] pcieport 0000:00:1c.0: PME: Signaling with IRQ 127 [ 0.844830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.845019] Monitor-Mwait will be used to enter C-1 state [ 0.845024] Monitor-Mwait will be used to enter C-2 state [ 0.845028] Monitor-Mwait will be used to enter C-3 state [ 0.845031] ACPI: \_SB_.PR00: Found 3 idle states [ 0.845875] ACPI: AC: AC Adapter [AC] (on-line) [ 0.845923] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.845949] ACPI: button: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.845979] ACPI: button: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.846000] ACPI: button: Power Button [PWRB] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.865974] ACPI: thermal: Thermal Zone [THM0] (40 C) [ 0.866266] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.867187] serial 0000:00:12.0: enabling device (0000 -> 0002) [ 0.867575] hpet_acpi_add: no address or irqs in _CRS [ 0.867588] Linux agpgart interface v0.103 [ 0.869206] tpm_tis STM0125:00: 2.0 TPM (device-id 0x0, rev-id 78) [ 0.886810] loop: module loaded [ 0.886958] tun: Universal TUN/TAP device driver, 1.6 [ 0.887014] PPP generic driver version 2.4.2 [ 0.887167] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.889289] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.889291] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.889416] mousedev: PS/2 mouse device common for all mice [ 0.889749] rtc_cmos rtc_cmos: RTC can wake from S4 [ 0.890658] rtc_cmos rtc_cmos: registered as rtc0 [ 0.890833] rtc_cmos rtc_cmos: setting system clock to 2023-10-08T10:29:58 UTC (1696760998) [ 0.890865] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 0.890868] i2c_dev: i2c /dev entries driver [ 0.891000] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.891214] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.891221] device-mapper: uevent: version 1.0.3 [ 0.891244] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.891255] platform eisa.0: Probing EISA bus 0 [ 0.891257] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.891258] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.891258] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.891259] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.891259] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.891260] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.891261] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.891261] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.891262] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.891263] platform eisa.0: EISA: Detected 0 cards [ 0.891265] intel_pstate: Intel P-state driver initializing [ 0.892434] intel_pstate: HWP enabled [ 0.893843] ledtrig-cpu: registered to indicate activity on CPUs [ 0.893857] efifb: probing for efifb [ 0.893869] efifb: showing boot graphics [ 0.900611] efifb: framebuffer at 0x4000000000, using 36000k, total 36000k [ 0.900612] efifb: mode is 3840x2400x32, linelength=15360, pages=1 [ 0.900613] efifb: scrolling: redraw [ 0.900613] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.900732] fbcon: Deferring console take-over [ 0.900733] fb0: EFI VGA frame buffer device [ 0.900833] intel_pmc_core INT33A1:00: initialized [ 0.900875] drop_monitor: Initializing network drop monitor service [ 0.908991] NET: Registered PF_INET6 protocol family [ 0.912509] ACPI: battery: Slot [BAT0] (battery present) [ 1.061745] Freeing initrd memory: 66848K [ 1.065963] Segment Routing with IPv6 [ 1.065972] In-situ OAM (IOAM) with IPv6 [ 1.065992] NET: Registered PF_PACKET protocol family [ 1.066100] Key type dns_resolver registered [ 1.067030] microcode: Microcode Update Driver: v2.2. [ 1.067236] resctrl: L2 allocation detected [ 1.067242] IPI shorthand broadcast: enabled [ 1.067937] sched_clock: Marking stable (1059204767, 8024889)->(907012086, 160217570) [ 1.068313] registered taskstats version 1 [ 1.069277] Loading compiled-in X.509 certificates [ 1.069684] Loaded X.509 cert 'Build time autogenerated kernel key: 625d94b96d0b77a8c71aae163f82bfb95222aa7e' [ 1.070046] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.070402] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.070403] blacklist: Loading compiled-in revocation X.509 certificates [ 1.070417] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.070426] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 1.070433] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 1.070442] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 1.070451] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 1.070460] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 1.070469] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 1.070477] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 1.070686] zswap: loaded using pool lzo/zbud [ 1.071724] Key type .fscrypt registered [ 1.071725] Key type fscrypt-provisioning registered [ 1.071855] Key type trusted registered [ 1.073577] Key type encrypted registered [ 1.073579] AppArmor: AppArmor sha1 policy hashing enabled [ 1.074133] integrity: Loading X.509 certificate: UEFI:db [ 1.074145] integrity: Loaded X.509 cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949' [ 1.074146] integrity: Loading X.509 certificate: UEFI:db [ 1.074153] integrity: Loaded X.509 cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f' [ 1.074154] integrity: Loading X.509 certificate: UEFI:db [ 1.074169] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.074169] integrity: Loading X.509 certificate: UEFI:db [ 1.074179] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.074459] integrity: Revoking X.509 certificate: UEFI:dbx [ 1.074470] blacklist: Revoked X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.074470] integrity: Revoking X.509 certificate: UEFI:dbx [ 1.074476] blacklist: Revoked X.509 cert 'Debian Secure Boot Signer: 00a7468def' [ 1.074593] blacklist: Problem blacklisting hash (-13) [ 1.074597] fbcon: Taking over console [ 1.074636] Console: switching to colour frame buffer device 240x75 [ 1.076035] blacklist: Problem blacklisting hash (-13) [ 1.076038] blacklist: Problem blacklisting hash (-13) [ 1.076039] blacklist: Problem blacklisting hash (-13) [ 1.076040] blacklist: Problem blacklisting hash (-13) [ 1.076042] blacklist: Problem blacklisting hash (-13) [ 1.076043] blacklist: Problem blacklisting hash (-13) [ 1.076045] blacklist: Problem blacklisting hash (-13) [ 1.076046] blacklist: Problem blacklisting hash (-13) [ 1.076047] blacklist: Problem blacklisting hash (-13) [ 1.076049] blacklist: Problem blacklisting hash (-13) [ 1.076050] blacklist: Problem blacklisting hash (-13) [ 1.076051] blacklist: Problem blacklisting hash (-13) [ 1.076053] blacklist: Problem blacklisting hash (-13) [ 1.076054] blacklist: Problem blacklisting hash (-13) [ 1.076055] blacklist: Problem blacklisting hash (-13) [ 1.076057] blacklist: Problem blacklisting hash (-13) [ 1.076059] blacklist: Problem blacklisting hash (-13) [ 1.076060] blacklist: Problem blacklisting hash (-13) [ 1.076061] blacklist: Problem blacklisting hash (-13) [ 1.076063] blacklist: Problem blacklisting hash (-13) [ 1.076065] blacklist: Problem blacklisting hash (-13) [ 1.076067] blacklist: Problem blacklisting hash (-13) [ 1.076068] blacklist: Problem blacklisting hash (-13) [ 1.076070] blacklist: Problem blacklisting hash (-13) [ 1.076071] blacklist: Problem blacklisting hash (-13) [ 1.076072] blacklist: Problem blacklisting hash (-13) [ 1.076262] blacklist: Problem blacklisting hash (-13) [ 1.076264] blacklist: Problem blacklisting hash (-13) [ 1.076312] blacklist: Problem blacklisting hash (-13) [ 1.076345] blacklist: Problem blacklisting hash (-13) [ 1.076391] blacklist: Problem blacklisting hash (-13) [ 1.076413] blacklist: Problem blacklisting hash (-13) [ 1.076550] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 1.076862] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 1.076866] Loading compiled-in module X.509 certificates [ 1.077335] Loaded X.509 cert 'Build time autogenerated kernel key: 625d94b96d0b77a8c71aae163f82bfb95222aa7e' [ 1.077337] ima: Allocated hash algorithm: sha1 [ 1.093103] evm: Initialising EVM extended attributes: [ 1.093104] evm: security.selinux [ 1.093105] evm: security.SMACK64 [ 1.093105] evm: security.SMACK64EXEC [ 1.093106] evm: security.SMACK64TRANSMUTE [ 1.093106] evm: security.SMACK64MMAP [ 1.093106] evm: security.apparmor [ 1.093107] evm: security.ima [ 1.093107] evm: security.capability [ 1.093108] evm: HMAC attrs: 0x1 [ 1.093392] PM: Magic number: 11:610:476 [ 1.093710] RAS: Correctable Errors collector initialized. [ 1.093721] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7 [ 1.103983] Freeing unused decrypted memory: 2036K [ 1.104491] Freeing unused kernel image (initmem) memory: 4764K [ 1.124281] Write protecting the kernel read-only data: 34816k [ 1.124864] Freeing unused kernel image (rodata/data gap) memory: 1332K [ 1.135351] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.135356] Run /init as init process [ 1.135357] with arguments: [ 1.135358] /init [ 1.135359] splash [ 1.135359] with environment: [ 1.135360] HOME=/ [ 1.135360] TERM=linux [ 1.135361] BOOT_IMAGE=/boot/vmlinuz-6.2.0-34-generic [ 1.212990] hid: raw HID events driver (C) Jiri Kosina [ 1.264850] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 1.264858] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 [ 1.265928] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 [ 1.268177] xhci_hcd 0000:00:0d.0: xHCI Host Controller [ 1.268183] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 [ 1.268186] xhci_hcd 0000:00:0d.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.268245] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 1.268247] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.268249] usb usb1: Product: xHCI Host Controller [ 1.268251] usb usb1: Manufacturer: Linux 6.2.0-34-generic xhci-hcd [ 1.268252] usb usb1: SerialNumber: ... [ 1.268628] hub 1-0:1.0: USB hub found [ 1.268636] hub 1-0:1.0: 1 port detected [ 1.269111] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02 [ 1.269113] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.269115] usb usb2: Product: xHCI Host Controller [ 1.269116] usb usb2: Manufacturer: Linux 6.2.0-34-generic xhci-hcd [ 1.269118] usb usb2: SerialNumber: ... [ 1.269187] hub 2-0:1.0: USB hub found [ 1.269196] hub 2-0:1.0: 4 ports detected [ 1.270414] usb: port power management may be unreliable [ 1.271039] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.271044] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.272136] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 [ 1.272404] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.272406] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.272408] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.272436] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02 [ 1.272438] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.272439] usb usb3: Product: xHCI Host Controller [ 1.272440] usb usb3: Manufacturer: Linux 6.2.0-34-generic xhci-hcd [ 1.272441] usb usb3: SerialNumber: ... [ 1.272553] hub 3-0:1.0: USB hub found [ 1.272574] hub 3-0:1.0: 12 ports detected [ 1.272741] ACPI: bus type thunderbolt registered [ 1.273300] mhi-pci-generic 0000:08:00.0: MHI PCI device found: foxconn-sdx55 [ 1.273305] mhi-pci-generic 0000:08:00.0: BAR 0: assigned [mem 0xbc200000-0xbc200fff 64bit] mhi-pci-generic 0000:08:00.0: enabling device (0000 -> 0002) [ 1.274237] mhi mhi0: Requested to power ON [ 1.274244] mhi mhi0: Power on setup success [ 1.274544] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02 [ 1.274546] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.274548] usb usb4: Product: xHCI Host Controller [ 1.274549] usb usb4: Manufacturer: Linux 6.2.0-34-generic xhci-hcd [ 1.274550] usb usb4: SerialNumber: ... [ 1.274655] hub 4-0:1.0: USB hub found [ 1.274673] hub 4-0:1.0: 4 ports detected [ 1.275036] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003) [ 1.275371] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.275440] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.276567] i2c i2c-0: 8/8 memory slots populated (from DMI) [ 1.276569] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 1.283748] nvme 0000:04:00.0: platform quirk: setting simple suspend [ 1.283799] nvme nvme0: pci function 0000:04:00.0 [ 1.292048] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 1.292356] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 1.308052] mhi mhi0: Wait for device to enter SBL or Mission mode [ 1.312094] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 1.312334] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 1.328044] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) [ 1.330187] idma64 idma64.2: Found Intel integrated DMA 64-bit [ 1.338153] nvme nvme0: 8/0/0 default/read/poll queues [ 1.341046] nvme0n1: p1 p2 p3 p4 p5 [ 1.486748] input: ELAN0673:00 04F3:3188 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0673:00/0018:04F3:3188.0001/input/input6 [ 1.486815] input: ELAN0673:00 04F3:3188 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0673:00/0018:04F3:3188.0001/input/input8 [ 1.486864] hid-generic 0018:04F3:3188.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0673:00 04F3:3188] on i2c-ELAN0673:00 [ 1.487130] input: WACF2200:00 056A:527E Touchscreen as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-WACF2200:00/0018:056A:527E.0002/input/input9 [ 1.487201] input: WACF2200:00 056A:527E as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-WACF2200:00/0018:056A:527E.0002/input/input10 [ 1.487251] input: WACF2200:00 056A:527E Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-WACF2200:00/0018:056A:527E.0002/input/input11 [ 1.487311] input: WACF2200:00 056A:527E as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-WACF2200:00/0018:056A:527E.0002/input/input12 [ 1.487409] input: WACF2200:00 056A:527E Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-WACF2200:00/0018:056A:527E.0002/input/input13 [ 1.487519] hid-generic 0018:056A:527E.0002: input,hidraw1: I2C HID v1.00 Mouse [WACF2200:00 056A:527E] on i2c-WACF2200:00 [ 1.493294] usbcore: registered new interface driver usbhid [ 1.493296] usbhid: USB HID core driver [ 1.528135] usb 3-3: new full-speed USB device number 2 using xhci_hcd [ 1.571234] typec port0: bound usb3-port5 (ops connector_ops) [ 1.571242] typec port0: bound usb2-port2 (ops connector_ops) [ 1.685912] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [ 1.685917] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.685919] usb 3-3: SerialNumber: ... [ 1.733769] input: Wacom HID 527E Pen as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-WACF2200:00/0018:056A:527E.0002/input/input14 [ 1.734509] input: Wacom HID 527E Finger as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-WACF2200:00/0018:056A:527E.0002/input/input15 [ 1.735038] wacom 0018:056A:527E.0002: hidraw1: I2C HID v1.00 Mouse [WACF2200:00 056A:527E] on i2c-WACF2200:00 [ 1.740675] psmouse serio1: trackpoint: Elan TrackPoint firmware: 0x92, buttons: 3/3 [ 1.753943] input: TPPS/2 Elan TrackPoint as /devices/platform/i8042/serio1/input/input5 [ 1.816151] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.968476] usb 3-4: New USB device found, idVendor=04f2, idProduct=b6ea, bcdDevice=62.18 [ 1.968480] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 1.968481] usb 3-4: Product: Integrated Camera [ 1.968482] usb 3-4: Manufacturer: Chicony Electronics Co.,Ltd. [ 1.968482] usb 3-4: SerialNumber: ... [ 2.079794] typec port1: bound usb3-port6 (ops connector_ops) [ 2.079816] typec port1: bound usb2-port3 (ops connector_ops) [ 2.096203] usb 3-6: new high-speed USB device number 4 using xhci_hcd [ 2.248070] usb 3-6: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.60 [ 2.248078] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.248080] usb 3-6: Product: USB2.1 Hub [ 2.248083] usb 3-6: Manufacturer: GenesysLogic [ 2.251028] hub 3-6:1.0: USB hub found [ 2.251444] hub 3-6:1.0: 2 ports detected [ 2.380188] usb 3-10: new full-speed USB device number 5 using xhci_hcd [ 2.408668] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [ 2.414541] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.420309] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.423429] hid-generic 001F:8087:0AC2.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on [ 2.535332] usb 3-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02 [ 2.535339] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.640197] usb 3-6.1: new high-speed USB device number 6 using xhci_hcd [ 2.771082] usb 3-6.1: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.71 [ 2.771087] usb 3-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.771088] usb 3-6.1: Product: USB2.1 Hub [ 2.771089] usb 3-6.1: Manufacturer: GenesysLogic [ 2.772146] hub 3-6.1:1.0: USB hub found [ 2.772424] hub 3-6.1:1.0: 4 ports detected [ 4.004439] EXT4-fs (nvme0n1p5): mounted filesystem HASH_611-D7BD-1345-1802-A3CC21B2C246 with ordered data mode. Quota mode: none. [ 4.362561] pstore: Using crash dump compression: deflate [ 4.368330] EXT4-fs (nvme0n1p5): re-mounted HASH_611-D7BD-1345-1802-A3CC21B2C246. Quota mode: none. [ 4.403884] Adding 2097148k swap on /swapfile. Priority:-2 extents:7 across:2138100k SSFS [ 4.411920] lp: driver loaded but no devices found [ 4.428442] pstore: Registered efi_pstore as persistent store backend [ 4.435070] ACPI: bus type drm_connector registered [ 4.436097] ppdev: user-space parallel port driver [ 4.485205] loop0: detected capacity change from 0 to 510112 [ 4.485912] loop1: detected capacity change from 0 to 8 [ 4.486750] loop2: detected capacity change from 0 to 620632 [ 4.487712] loop3: detected capacity change from 0 to 621424 [ 4.488090] loop4: detected capacity change from 0 to 216592 [ 4.488749] loop5: detected capacity change from 0 to 216720 [ 4.489597] loop6: detected capacity change from 0 to 114000 [ 4.490038] loop7: detected capacity change from 0 to 113992 [ 4.490875] loop8: detected capacity change from 0 to 129944 [ 4.491451] loop9: detected capacity change from 0 to 129976 [ 4.492203] loop10: detected capacity change from 0 to 151296 [ 4.492943] loop11: detected capacity change from 0 to 151352 [ 4.493759] loop12: detected capacity change from 0 to 136320 [ 4.494694] loop13: detected capacity change from 0 to 485192 [ 4.495338] loop14: detected capacity change from 0 to 492488 [ 4.496369] loop15: detected capacity change from 0 to 422328 [ 4.497081] loop16: detected capacity change from 0 to 15216 [ 4.497991] loop17: detected capacity change from 0 to 1067904 [ 4.498928] loop18: detected capacity change from 0 to 337560 [ 4.499530] loop19: detected capacity change from 0 to 337560 [ 4.500779] loop20: detected capacity change from 0 to 716168 [ 4.501158] loop21: detected capacity change from 0 to 716176 [ 4.502251] loop22: detected capacity change from 0 to 1017608 [ 4.502843] loop23: detected capacity change from 0 to 1017816 [ 4.503904] loop24: detected capacity change from 0 to 280 [ 4.504663] loop25: detected capacity change from 0 to 187776 [ 4.505484] loop26: detected capacity change from 0 to 483248 [ 4.506412] loop27: detected capacity change from 0 to 893552 [ 4.507193] loop28: detected capacity change from 0 to 895472 [ 4.508514] loop29: detected capacity change from 0 to 918896 [ 4.509204] loop30: detected capacity change from 0 to 918896 [ 4.509810] loop31: detected capacity change from 0 to 919392 [ 4.510609] loop32: detected capacity change from 0 to 919168 [ 4.511625] loop33: detected capacity change from 0 to 921912 [ 4.512315] loop34: detected capacity change from 0 to 480464 [ 4.513635] loop35: detected capacity change from 0 to 500880 [ 4.513996] loop36: detected capacity change from 0 to 36552 [ 4.515126] loop37: detected capacity change from 0 to 741888 [ 4.515562] loop38: detected capacity change from 0 to 359304 [ 4.516670] loop39: detected capacity change from 0 to 359304 [ 4.517573] loop40: detected capacity change from 0 to 94064 [ 4.518241] loop41: detected capacity change from 0 to 25240 [ 4.519006] loop42: detected capacity change from 0 to 83648 [ 4.520004] loop43: detected capacity change from 0 to 83648 [ 4.520947] loop44: detected capacity change from 0 to 856 [ 4.521652] loop45: detected capacity change from 0 to 904 [ 4.522585] loop46: detected capacity change from 0 to 156192 [ 4.523346] loop47: detected capacity change from 0 to 156200 [ 4.689243] input: Intel HID events as /devices/platform/INTC1051:00/input/input17 [ 4.693944] Consider using thermal netlink events interface [ 4.751486] nfc: nfc_init: NFC Core ver 0.1 [ 4.751490] EDAC igen6: v2.5 [ 4.751516] NET: Registered PF_NFC protocol family [ 4.785614] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.785742] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.785993] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 4.804426] Non-volatile memory driver v1.3 [ 4.809674] input: ELAN0673:00 04F3:3188 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0673:00/0018:04F3:3188.0001/input/input18 [ 4.809776] input: ELAN0673:00 04F3:3188 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0673:00/0018:04F3:3188.0001/input/input20 [ 4.809863] hid-multitouch 0018:04F3:3188.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0673:00 04F3:3188] on i2c-ELAN0673:00 [ 4.837506] Intel(R) Wireless WiFi driver for Linux [ 4.837736] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) [ 4.838301] spi-nor spi0.0: w25q256 (32768 Kbytes) [ 4.846201] Creating 1 MTD partitions on "0000:00:1f.5": [ 4.846206] 0x000000000000-0x000002000000 : "BIOS" [ 4.850771] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver [ 4.850784] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 4.851244] iwlwifi 0000:00:14.3: loaded firmware version 72.daa05125.0 QuZ-a0-hr-b0-72.ucode op_mode iwlmvm [ 4.853247] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 4.853249] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 4.853250] thinkpad_acpi: ThinkPad BIOS N32ET86W (1.62 ), EC N32HT54W [ 4.853252] thinkpad_acpi: Lenovo ThinkPad X1 Yoga Gen 6, model 20XY005MGE [ 4.855429] thinkpad_acpi: radio switch found; radios are enabled [ 4.855549] thinkpad_acpi: Tablet mode switch found (type: GMMS), currently in laptop mode [ 4.855673] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 4.855674] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 4.865381] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 4.874830] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is blocked [ 4.881732] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 4.881736] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.881737] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.881738] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.881739] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 4.893015] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 4.893044] cryptd: max_cpu_qlen set to 1000 [ 4.971044] intel_rapl_common: Found RAPL domain package [ 4.977327] thinkpad_acpi: secondary fan control detected & enabled [ 4.982530] thinkpad_acpi: battery 1 registered (start 0, stop 100, behaviours: 0x7) [ 4.982547] ACPI: battery: new extension: ThinkPad Battery Extension [ 4.985392] AVX2 version of gcm_enc/dec engaged. [ 4.985432] AES CTR mode by8 optimization enabled [ 4.998577] intel_rapl_msr: PL4 support detected. [ 5.000682] intel_rapl_common: Found RAPL domain package [ 5.000684] intel_rapl_common: Found RAPL domain core [ 5.000686] intel_rapl_common: Found RAPL domain uncore [ 5.000688] intel_rapl_common: Found RAPL domain psys [ 5.019150] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input21 [ 5.030454] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351 [ 5.030515] thermal thermal_zone6: failed to read out thermal zone (-61) [ 5.102448] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 5.102591] snd_hda_intel 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.156534] iwlwifi 0000:00:14.3: Detected RF HR B5, rfid=0x10a100 [ 5.223347] iwlwifi 0000:00:14.3: base HW address: E77F9448F9D97FFDCAA94798AB093DF7 [ 5.330210] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 5.334071] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 5.334672] Console: switching to colour dummy device 80x25 [ 5.334701] i915 0000:00:02.0: vgaarb: deactivate vga console [ 5.334757] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 5.335231] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem [ 5.338259] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12) [ 5.342303] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0 [ 5.354476] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 5.374610] intel_tcc_cooling: Programmable TCC Offset detected [ 5.448097] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 5.449727] sof-audio-pci-intel-tgl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver [ 5.450721] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040380 [ 5.501428] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [ 5.501616] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized [ 5.501717] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A [ 5.910448] Bluetooth: Core ver 2.22 [ 5.910478] NET: Registered PF_BLUETOOTH protocol family [ 5.910479] Bluetooth: HCI device and connection manager initialized [ 5.910483] Bluetooth: HCI socket layer initialized [ 5.910486] Bluetooth: L2CAP socket layer initialized [ 5.910489] Bluetooth: SCO socket layer initialized [ 5.926939] mc: Linux media interface: v0.10 [ 5.948946] videodev: Linux video capture interface: v2.00 [ 6.014548] hid-sensor-hub 001F:8087:0AC2.0004: hid_field_extract() called with n (192) > 32! (kworker/3:1) [ 6.064477] usbcore: registered new interface driver btusb [ 6.065241] Bluetooth: hci0: Bootloader revision 0.4 build 0 week 30 2018 [ 6.066254] Bluetooth: hci0: Device revision is 2 [ 6.066257] Bluetooth: hci0: Secure boot is enabled [ 6.066257] Bluetooth: hci0: OTP lock is enabled [ 6.066258] Bluetooth: hci0: API lock is enabled [ 6.066258] Bluetooth: hci0: Debug lock is disabled [ 6.066259] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 6.067606] Bluetooth: hci0: Found device firmware: intel/ibt-19-0-4.sfi [ 6.067657] Bluetooth: hci0: Boot Address: 0x24800 [ 6.067659] Bluetooth: hci0: Firmware Version: 15-45.22 [ 6.096614] usb 3-4: Found UVC 1.10 device Integrated Camera (04f2:b6ea) [ 6.098392] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input22 [ 6.098841] usb 3-4: Found UVC 1.50 device Integrated Camera (04f2:b6ea) [ 6.099265] input: Integrated Camera: Integrated I as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.2/input/input23 [ 6.099298] usbcore: registered new interface driver uvcvideo [ 6.145187] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.145191] Bluetooth: BNEP filters: protocol multicast [ 6.145195] Bluetooth: BNEP socket layer initialized [ 6.734484] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 6.737031] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.737374] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input24 [ 6.737520] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.775983] fbcon: i915drmfb (fb0) is primary device [ 6.882516] loop48: detected capacity change from 0 to 8 [ 6.891092] Console: switching to colour frame buffer device 240x67 [ 6.916886] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 6.963686] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode [ 7.001524] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5 [ 7.001529] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now [ 7.001532] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 4 [ 7.002721] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 7.002725] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 7.002729] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30 [ 7.113247] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 7.113254] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 7.130505] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:0 [ 7.130773] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred [ 7.157536] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC287: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker [ 7.157541] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.157542] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 7.157543] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 7.157544] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 7.157545] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 [ 7.207630] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten [ 7.207638] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten [ 7.207773] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten [ 7.207778] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten [ 7.207782] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten [ 7.207785] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten [ 7.207789] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten [ 7.207794] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten [ 7.207799] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten [ 7.207804] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten [ 7.207809] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten [ 7.207814] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten [ 7.207818] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten [ 7.207830] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3 [ 7.250495] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input25 [ 7.250558] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input26 [ 7.250595] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input27 [ 7.250633] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input28 [ 7.250678] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input29 [ 7.823739] Bluetooth: hci0: Waiting for firmware download to complete [ 7.824217] Bluetooth: hci0: Firmware loaded in 1715437 usecs [ 7.824277] Bluetooth: hci0: Waiting for device to boot [ 7.839496] Bluetooth: hci0: Device booted in 14897 usecs [ 7.839502] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [ 7.839748] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-19-0-4.ddc [ 7.841335] Bluetooth: hci0: Applying Intel DDC parameters completed [ 7.842586] Bluetooth: hci0: Firmware revision 0.4 build 15 week 45 2022 [ 7.907397] Bluetooth: MGMT ver 1.22 [ 7.912658] NET: Registered PF_ALG protocol family [ 7.939358] Bluetooth: RFCOMM TTY layer initialized [ 7.939366] Bluetooth: RFCOMM socket layer initialized [ 7.939370] Bluetooth: RFCOMM ver 1.11 [ 8.706347] rfkill: input handler disabled [ 9.807683] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [ 9.811032] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [ 9.860711] wlp0s20f3: authenticated [ 9.864140] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [ 9.871684] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=6) [ 9.879208] wlp0s20f3: associated [ 10.009142] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [ 10.009167] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [ 14.389448] rfkill: input handler enabled [ 15.998717] rfkill: input handler disabled [ 17.009843] input: XP-PEN STYLUS as /devices/virtual/input/input30 [ 17.010004] input: XP-PEN MOUSE as /devices/virtual/input/input31 [ 17.021857] input: XP-PEN ERASER as /devices/virtual/input/input32 [ 242.617323] INFO: task chrome:5553 blocked for more than 120 seconds. [ 242.617336] Not tainted 6.2.0-34-generic #34-Ubuntu [ 242.617340] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 242.617343] task:chrome state:D stack:0 pid:5553 ppid:4403 flags:0x00000002 [ 242.617352] Call Trace: [ 242.617356] <TASK> [ 242.617362] __schedule+0x2aa/0x610 [ 242.617374] schedule+0x63/0x110 [ 242.617378] schedule_preempt_disabled+0x15/0x30 [ 242.617383] __mutex_lock.constprop.0+0x3f8/0x7a0 [ 242.617392] __mutex_lock_slowpath+0x13/0x20 [ 242.617398] mutex_lock+0x3c/0x50 [ 242.617405] snd_pcm_control_ioctl+0x220/0x2c0 [snd_pcm] snd_ctl_ioctl+0x51b/0x650 [snd] ? mutex_lock+0x12/0x50 [ 242.617465] ? snd_pcm_control_ioctl+0xda/0x2c0 [snd_pcm] ? __fget_light+0xa5/0x120 [ 242.617495] __x64_sys_ioctl+0x9d/0xe0 [ 242.617503] do_syscall_64+0x58/0x90 [ 242.617511] ? exit_to_user_mode_prepare+0x30/0xb0 [ 242.617521] ? syscall_exit_to_user_mode+0x37/0x60 [ 242.617528] ? do_syscall_64+0x67/0x90 [ 242.617535] ? do_syscall_64+0x67/0x90 [ 242.617541] ? syscall_exit_to_user_mode+0x37/0x60 [ 242.617547] ? do_syscall_64+0x67/0x90 [ 242.617553] ? do_syscall_64+0x67/0x90 [ 242.617559] ? irqentry_exit+0x43/0x50 [ 242.617566] ? sysvec_irq_work+0x4b/0xd0 [ 242.617571] entry_SYSCALL_64_after_hwframe+0x73/0xdd [ 242.617578] RIP: 0033:0x7fb929111eef [ 242.617583] RSP: 002b:00007ffd7570e110 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 242.617589] RAX: ffffffffffffffda RBX: 00007ffd7570e190 RCX: 00007fb929111eef [ 242.617592] RDX: 00007ffd7570e190 RSI: 00000000c1205531 RDI: 0000000000000015 [ 242.617595] RBP: 00007ffd7570e348 R08: 0000000000000000 R09: 0000000000000000 [ 242.617597] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd7570e5e0 [ 242.617600] R13: 00007ffd7570e190 R14: 00007ffd7570e328 R15: 000035ec0004d4a0 [ 242.617605] </TASK> [ 311.607703] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5 [ 313.623656] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5 [ 9224.852871] wlp0s20f3: authenticate with 4392CBF08C375D29100227C36397C70D [ 9224.852920] wlp0s20f3: 80 MHz not supported, disabling VHT [ 9224.857400] wlp0s20f3: send auth to 4392CBF08C375D29100227C36397C70D (try 1/3) [ 9224.891560] wlp0s20f3: authenticated [ 9224.896887] wlp0s20f3: associate with 4392CBF08C375D29100227C36397C70D (try 1/3) [ 9224.911733] wlp0s20f3: RX AssocResp from 4392CBF08C375D29100227C36397C70D (capab=0x1431 status=0 aid=2) [ 9224.924152] wlp0s20f3: associated [ 9225.009513] wlp0s20f3: Limiting TX power to 20 (20 - 0) dBm as advertised by 4392CBF08C375D29100227C36397C70D [16493.983552] wlp0s20f3: Connection to AP 4392CBF08C375D29100227C36397C70D lost [16495.430123] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [16495.438301] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [16495.475642] wlp0s20f3: authenticated [16495.476578] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [16495.488263] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=3) [16495.497273] wlp0s20f3: associated [16495.593276] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [27674.055155] usb 3-6: USB disconnect, device number 4 [27674.055159] usb 3-6.1: USB disconnect, device number 6 [28606.688797] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [28607.223273] PM: suspend entry (deep) [28607.225915] Filesystems sync: 0.002 seconds [28607.484271] Freezing user space processes [28607.487473] Freezing user space processes completed (elapsed 0.003 seconds) [28607.487480] OOM killer disabled. [28607.487482] Freezing remaining freezable tasks [28607.488539] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [28607.488658] printk: Suspending console(s) (use no_console_suspend to debug) [28608.065336] ACPI: EC: interrupt blocked [28608.193878] ACPI: PM: Preparing to enter system sleep state S3 [28608.220827] ACPI: EC: event blocked [28608.220830] ACPI: EC: EC stopped [28608.220831] ACPI: PM: Saving platform NVS memory [28608.221120] Disabling non-boot CPUs ... [28608.223233] smpboot: CPU 1 is now offline [28608.226412] smpboot: CPU 2 is now offline [28608.229158] smpboot: CPU 3 is now offline [28608.232355] smpboot: CPU 4 is now offline [28608.237254] smpboot: CPU 5 is now offline [28608.239297] smpboot: CPU 6 is now offline [28608.242125] smpboot: CPU 7 is now offline [28608.249799] ACPI: PM: Low-level resume complete [28608.250009] ACPI: EC: EC started [28608.250010] ACPI: PM: Restoring platform NVS memory [28608.251348] Enabling non-boot CPUs ... [28608.251398] x86: Booting SMP configuration: [28608.251398] smpboot: Booting Node 0 Processor 1 APIC 0x2 [28608.252405] CPU1 is up [28608.252437] smpboot: Booting Node 0 Processor 2 APIC 0x4 [28608.253607] CPU2 is up [28608.253630] smpboot: Booting Node 0 Processor 3 APIC 0x6 [28608.254797] CPU3 is up [28608.254820] smpboot: Booting Node 0 Processor 4 APIC 0x1 [28608.256153] CPU4 is up [28608.256180] smpboot: Booting Node 0 Processor 5 APIC 0x3 [28608.257529] CPU5 is up [28608.257562] smpboot: Booting Node 0 Processor 6 APIC 0x5 [28608.258872] CPU6 is up [28608.258901] smpboot: Booting Node 0 Processor 7 APIC 0x7 [28608.260505] CPU7 is up [28608.270939] ACPI: PM: Waking up from system sleep state S3 [28608.316383] ACPI: EC: interrupt unblocked [28609.519350] ACPI: EC: event unblocked [28609.519679] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [28609.528151] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [28609.528161] usb usb1: root hub lost power or was reset [28609.528163] usb usb2: root hub lost power or was reset [28609.528764] mhi mhi0: Resuming from non M3 state (RESET) [28609.528770] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [28609.528795] mhi-pci-generic 0000:08:00.0: device recovery started [28609.544206] mhi mhi0: Requested to power ON [28609.544218] mhi mhi0: Power on setup success [28609.572309] nvme nvme0: 8/0/0 default/read/poll queues [28609.844248] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [28609.975965] mhi mhi0: Wait for device to enter SBL or Mission mode [28610.013709] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [28610.013921] OOM killer enabled. [28610.013924] Restarting tasks ... [28610.014001] usb 3-3: USB disconnect, device number 2 [28610.020158] done. [28610.020187] random: crng reseeded on system resumption [28610.024474] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [28610.134605] thermal thermal_zone6: failed to read out thermal zone (-61) [28610.143778] usb 3-3: new full-speed USB device number 7 using xhci_hcd [28610.268940] PM: suspend exit [28610.292894] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [28610.292907] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [28610.292911] usb 3-3: SerialNumber: ... [28610.533986] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [28612.835915] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [28614.341238] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [28614.344152] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [28614.405314] wlp0s20f3: authenticated [28614.407765] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [28614.416289] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=6) [28614.422407] wlp0s20f3: associated [28614.484797] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [28614.504695] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [28617.564873] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [29036.440716] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [29036.910657] PM: suspend entry (deep) [29036.912896] Filesystems sync: 0.002 seconds [29037.172120] Freezing user space processes [29037.175266] Freezing user space processes completed (elapsed 0.003 seconds) [29037.175273] OOM killer disabled. [29037.175275] Freezing remaining freezable tasks [29037.176586] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [29037.176725] printk: Suspending console(s) (use no_console_suspend to debug) [29037.760430] ACPI: EC: interrupt blocked [29037.898233] ACPI: PM: Preparing to enter system sleep state S3 [29037.925003] ACPI: EC: event blocked [29037.925005] ACPI: EC: EC stopped [29037.925006] ACPI: PM: Saving platform NVS memory [29037.925255] Disabling non-boot CPUs ... [29037.927502] smpboot: CPU 1 is now offline [29037.931258] smpboot: CPU 2 is now offline [29037.935885] smpboot: CPU 3 is now offline [29037.938371] smpboot: CPU 4 is now offline [29037.942092] smpboot: CPU 5 is now offline [29037.944837] smpboot: CPU 6 is now offline [29037.947422] smpboot: CPU 7 is now offline [29037.955056] ACPI: PM: Low-level resume complete [29037.955327] ACPI: EC: EC started [29037.955328] ACPI: PM: Restoring platform NVS memory [29037.957230] Enabling non-boot CPUs ... [29037.957275] x86: Booting SMP configuration: [29037.957276] smpboot: Booting Node 0 Processor 1 APIC 0x2 [29037.958345] CPU1 is up [29037.958377] smpboot: Booting Node 0 Processor 2 APIC 0x4 [29037.959581] CPU2 is up [29037.959602] smpboot: Booting Node 0 Processor 3 APIC 0x6 [29037.960828] CPU3 is up [29037.960848] smpboot: Booting Node 0 Processor 4 APIC 0x1 [29037.962192] CPU4 is up [29037.962219] smpboot: Booting Node 0 Processor 5 APIC 0x3 [29037.963646] CPU5 is up [29037.963678] smpboot: Booting Node 0 Processor 6 APIC 0x5 [29037.965086] CPU6 is up [29037.965111] smpboot: Booting Node 0 Processor 7 APIC 0x7 [29037.966561] CPU7 is up [29037.977052] ACPI: PM: Waking up from system sleep state S3 [29038.027998] ACPI: EC: interrupt unblocked [29039.251968] ACPI: EC: event unblocked [29039.255914] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [29039.261237] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [29039.261243] usb usb1: root hub lost power or was reset [29039.261245] usb usb2: root hub lost power or was reset [29039.261994] mhi mhi0: Resuming from non M3 state (RESET) [29039.261999] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [29039.262013] mhi-pci-generic 0000:08:00.0: device recovery started [29039.297138] mhi mhi0: Requested to power ON [29039.297152] mhi mhi0: Power on setup success [29039.307912] nvme nvme0: 8/0/0 default/read/poll queues [29039.573038] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [29039.764760] mhi mhi0: Wait for device to enter SBL or Mission mode [29039.798565] OOM killer enabled. [29039.798568] Restarting tasks ... [29039.798541] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [29039.799353] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [29039.815573] done. [29039.815607] random: crng reseeded on system resumption [29039.816936] usb 3-3: USB disconnect, device number 7 [29040.050118] thermal thermal_zone6: failed to read out thermal zone (-61) [29040.052582] usb 3-3: new full-speed USB device number 8 using xhci_hcd [29040.177012] PM: suspend exit [29040.211532] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [29040.211541] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [29040.211544] usb 3-3: SerialNumber: ... [29040.334466] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [29042.664544] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [29044.067824] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [29044.076376] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [29044.139114] wlp0s20f3: authenticated [29044.140554] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [29044.144867] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=6) [29044.150043] wlp0s20f3: associated [29044.197348] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [29044.224781] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [29047.161344] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [29438.826508] wlp0s20f3: disconnect from AP 98119FD68CFEDA0B031C4ABF7EC98FB0 for new auth to 4392CBF08C375D29100227C36397C70D [29438.894477] wlp0s20f3: authenticate with 4392CBF08C375D29100227C36397C70D [29438.894502] wlp0s20f3: 80 MHz not supported, disabling VHT [29438.899638] wlp0s20f3: send auth to 4392CBF08C375D29100227C36397C70D (try 1/3) [29438.931230] wlp0s20f3: authenticated [29438.933751] wlp0s20f3: associate with 4392CBF08C375D29100227C36397C70D (try 1/3) [29438.942955] wlp0s20f3: RX ReassocResp from 4392CBF08C375D29100227C36397C70D (capab=0x1431 status=0 aid=1) [29438.952266] wlp0s20f3: associated [29439.287205] wlp0s20f3: Limiting TX power to 20 (20 - 0) dBm as advertised by 4392CBF08C375D29100227C36397C70D [29531.577427] wlp0s20f3: disconnect from AP 4392CBF08C375D29100227C36397C70D for new auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 [29531.664895] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [29531.675785] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [29531.709292] wlp0s20f3: authenticated [29531.713087] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [29531.720365] wlp0s20f3: RX ReassocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=6) [29531.737211] wlp0s20f3: associated [29531.809366] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [30089.016671] lockdown_is_locked_down: 4 callbacks suppressed [30089.078288] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [30089.537659] PM: suspend entry (deep) [30089.539917] Filesystems sync: 0.002 seconds [30089.800382] Freezing user space processes [30089.803239] Freezing user space processes completed (elapsed 0.002 seconds) [30089.803247] OOM killer disabled. [30089.803249] Freezing remaining freezable tasks [30089.804547] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [30089.804666] printk: Suspending console(s) (use no_console_suspend to debug) [30090.386120] ACPI: EC: interrupt blocked [30090.514614] ACPI: PM: Preparing to enter system sleep state S3 [30090.541440] ACPI: EC: event blocked [30090.541442] ACPI: EC: EC stopped [30090.541443] ACPI: PM: Saving platform NVS memory [30090.541690] Disabling non-boot CPUs ... [30090.543913] smpboot: CPU 1 is now offline [30090.547662] smpboot: CPU 2 is now offline [30090.550981] smpboot: CPU 3 is now offline [30090.554238] smpboot: CPU 4 is now offline [30090.558455] smpboot: CPU 5 is now offline [30090.560608] smpboot: CPU 6 is now offline [30090.563021] smpboot: CPU 7 is now offline [30090.572059] ACPI: PM: Low-level resume complete [30090.572331] ACPI: EC: EC started [30090.572332] ACPI: PM: Restoring platform NVS memory [30090.574035] Enabling non-boot CPUs ... [30090.574096] x86: Booting SMP configuration: [30090.574096] smpboot: Booting Node 0 Processor 1 APIC 0x2 [30090.575175] CPU1 is up [30090.575207] smpboot: Booting Node 0 Processor 2 APIC 0x4 [30090.576389] CPU2 is up [30090.576412] smpboot: Booting Node 0 Processor 3 APIC 0x6 [30090.577538] CPU3 is up [30090.577561] smpboot: Booting Node 0 Processor 4 APIC 0x1 [30090.578911] CPU4 is up [30090.578936] smpboot: Booting Node 0 Processor 5 APIC 0x3 [30090.580318] CPU5 is up [30090.580338] smpboot: Booting Node 0 Processor 6 APIC 0x5 [30090.581562] CPU6 is up [30090.581583] smpboot: Booting Node 0 Processor 7 APIC 0x7 [30090.583105] CPU7 is up [30090.593836] ACPI: PM: Waking up from system sleep state S3 [30090.659443] ACPI: EC: interrupt unblocked [30091.860375] ACPI: EC: event unblocked [30091.865408] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [30091.867689] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [30091.867691] usb usb1: root hub lost power or was reset [30091.867692] usb usb2: root hub lost power or was reset [30091.868170] mhi mhi0: Resuming from non M3 state (RESET) [30091.868176] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [30091.868188] mhi-pci-generic 0000:08:00.0: device recovery started [30091.905349] mhi mhi0: Requested to power ON [30091.905363] mhi mhi0: Power on setup success [30091.915204] nvme nvme0: 8/0/0 default/read/poll queues [30092.177297] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [30092.360395] OOM killer enabled. [30092.360399] Restarting tasks ... [30092.360450] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [30092.360969] usb 3-3: USB disconnect, device number 8 [30092.361084] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [30092.370911] done. [30092.371432] random: crng reseeded on system resumption [30092.405943] thermal thermal_zone6: failed to read out thermal zone (-61) [30092.409862] mhi mhi0: Wait for device to enter SBL or Mission mode [30092.500883] usb 3-3: new full-speed USB device number 9 using xhci_hcd [30092.530641] PM: suspend exit [30092.654235] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [30092.654241] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [30092.654242] usb 3-3: SerialNumber: ... [30092.910780] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [30095.337022] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [30096.450249] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [30096.453310] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [30096.502991] wlp0s20f3: authenticated [30096.508983] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [30096.513371] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=6) [30096.519422] wlp0s20f3: associated [30096.569926] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [30096.589699] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [30099.615492] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [32467.638919] lockdown_is_locked_down: 2 callbacks suppressed [32467.674375] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [32468.144119] PM: suspend entry (deep) [32468.146951] Filesystems sync: 0.002 seconds [32468.407477] Freezing user space processes [32468.411040] Freezing user space processes completed (elapsed 0.003 seconds) [32468.411047] OOM killer disabled. [32468.411049] Freezing remaining freezable tasks [32468.412224] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [32468.412347] printk: Suspending console(s) (use no_console_suspend to debug) [32468.993085] ACPI: EC: interrupt blocked [32469.113564] ACPI: PM: Preparing to enter system sleep state S3 [32469.140188] ACPI: EC: event blocked [32469.140190] ACPI: EC: EC stopped [32469.140191] ACPI: PM: Saving platform NVS memory [32469.140449] Disabling non-boot CPUs ... [32469.142680] smpboot: CPU 1 is now offline [32469.145481] smpboot: CPU 2 is now offline [32469.148264] smpboot: CPU 3 is now offline [32469.153463] smpboot: CPU 4 is now offline [32469.156419] smpboot: CPU 5 is now offline [32469.158797] smpboot: CPU 6 is now offline [32469.162026] smpboot: CPU 7 is now offline [32469.169483] ACPI: PM: Low-level resume complete [32469.169768] ACPI: EC: EC started [32469.169768] ACPI: PM: Restoring platform NVS memory [32469.171243] Enabling non-boot CPUs ... [32469.171282] x86: Booting SMP configuration: [32469.171282] smpboot: Booting Node 0 Processor 1 APIC 0x2 [32469.172372] CPU1 is up [32469.172405] smpboot: Booting Node 0 Processor 2 APIC 0x4 [32469.173602] CPU2 is up [32469.173624] smpboot: Booting Node 0 Processor 3 APIC 0x6 [32469.174802] CPU3 is up [32469.174822] smpboot: Booting Node 0 Processor 4 APIC 0x1 [32469.176104] CPU4 is up [32469.176130] smpboot: Booting Node 0 Processor 5 APIC 0x3 [32469.177208] CPU5 is up [32469.177229] smpboot: Booting Node 0 Processor 6 APIC 0x5 [32469.178490] CPU6 is up [32469.178511] smpboot: Booting Node 0 Processor 7 APIC 0x7 [32469.179893] CPU7 is up [32469.191083] ACPI: PM: Waking up from system sleep state S3 [32469.237199] ACPI: EC: interrupt unblocked [32470.439155] ACPI: EC: event unblocked [32470.442936] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [32470.447391] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [32470.447399] usb usb1: root hub lost power or was reset [32470.447402] usb usb2: root hub lost power or was reset [32470.448703] mhi mhi0: Resuming from non M3 state (RESET) [32470.448708] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [32470.448868] mhi-pci-generic 0000:08:00.0: device recovery started [32470.488174] mhi mhi0: Requested to power ON [32470.488187] mhi mhi0: Power on setup success [32470.492966] nvme nvme0: 8/0/0 default/read/poll queues [32470.760235] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [32470.924468] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [32470.924697] OOM killer enabled. [32470.924700] Restarting tasks ... [32470.924785] usb 3-3: USB disconnect, device number 9 [32470.925764] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [32470.933722] done. [32470.933756] random: crng reseeded on system resumption [32470.991736] mhi mhi0: Wait for device to enter SBL or Mission mode [32471.051682] usb 3-3: new full-speed USB device number 10 using xhci_hcd [32471.108476] thermal thermal_zone6: failed to read out thermal zone (-61) [32471.202843] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [32471.202853] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [32471.202856] usb 3-3: SerialNumber: ... [32471.247877] PM: suspend exit [32471.453813] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [32473.819671] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [32475.237263] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [32475.245559] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [32475.309270] wlp0s20f3: authenticated [32475.311667] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [32475.320297] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=6) [32475.325812] wlp0s20f3: associated [32475.404140] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [32475.413409] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [32478.305900] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [34969.896417] lockdown_is_locked_down: 2 callbacks suppressed [34969.967777] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [34970.507996] PM: suspend entry (deep) [34970.510953] Filesystems sync: 0.002 seconds [34970.770538] Freezing user space processes [34970.773552] Freezing user space processes completed (elapsed 0.003 seconds) [34970.773558] OOM killer disabled. [34970.773560] Freezing remaining freezable tasks [34970.774955] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [34970.775061] printk: Suspending console(s) (use no_console_suspend to debug) [34971.358633] ACPI: EC: interrupt blocked [34971.480622] ACPI: PM: Preparing to enter system sleep state S3 [34971.507376] ACPI: EC: event blocked [34971.507378] ACPI: EC: EC stopped [34971.507379] ACPI: PM: Saving platform NVS memory [34971.507687] Disabling non-boot CPUs ... [34971.509916] smpboot: CPU 1 is now offline [34971.514826] smpboot: CPU 2 is now offline [34971.518307] smpboot: CPU 3 is now offline [34971.522401] smpboot: CPU 4 is now offline [34971.525576] smpboot: CPU 5 is now offline [34971.527996] smpboot: CPU 6 is now offline [34971.532960] smpboot: CPU 7 is now offline [34971.540131] ACPI: PM: Low-level resume complete [34971.540404] ACPI: EC: EC started [34971.540405] ACPI: PM: Restoring platform NVS memory [34971.541702] Enabling non-boot CPUs ... [34971.541758] x86: Booting SMP configuration: [34971.541759] smpboot: Booting Node 0 Processor 1 APIC 0x2 [34971.542831] CPU1 is up [34971.542866] smpboot: Booting Node 0 Processor 2 APIC 0x4 [34971.544020] CPU2 is up [34971.544044] smpboot: Booting Node 0 Processor 3 APIC 0x6 [34971.545208] CPU3 is up [34971.545231] smpboot: Booting Node 0 Processor 4 APIC 0x1 [34971.546478] CPU4 is up [34971.546504] smpboot: Booting Node 0 Processor 5 APIC 0x3 [34971.547821] CPU5 is up [34971.547843] smpboot: Booting Node 0 Processor 6 APIC 0x5 [34971.549181] CPU6 is up [34971.549201] smpboot: Booting Node 0 Processor 7 APIC 0x7 [34971.550564] CPU7 is up [34971.561235] ACPI: PM: Waking up from system sleep state S3 [34971.620703] ACPI: EC: interrupt unblocked [34972.814193] ACPI: EC: event unblocked [34972.818258] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [34972.821922] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [34972.821930] usb usb1: root hub lost power or was reset [34972.821933] usb usb2: root hub lost power or was reset [34972.822713] mhi mhi0: Resuming from non M3 state (RESET) [34972.822719] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [34972.822734] mhi-pci-generic 0000:08:00.0: device recovery started [34972.855275] mhi mhi0: Requested to power ON [34972.855289] mhi mhi0: Power on setup success [34972.868697] nvme nvme0: 8/0/0 default/read/poll queues [34973.139100] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [34973.358807] mhi mhi0: Wait for device to enter SBL or Mission mode [34973.368620] OOM killer enabled. [34973.368623] Restarting tasks ... [34973.368614] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [34973.370391] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [34973.378141] done. [34973.378172] random: crng reseeded on system resumption [34973.387507] usb 3-3: USB disconnect, device number 10 [34973.531180] thermal thermal_zone6: failed to read out thermal zone (-61) [34973.578665] usb 3-3: new full-speed USB device number 11 using xhci_hcd [34973.665853] PM: suspend exit [34973.727715] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [34973.727722] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [34973.727724] usb 3-3: SerialNumber: ... [34973.860643] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [34976.290908] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [34977.435530] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [34977.444389] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [34977.509508] wlp0s20f3: authenticated [34977.510840] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [34977.520533] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=6) [34977.526366] wlp0s20f3: associated [34977.545905] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [34977.615859] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [34980.844123] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [35392.795066] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [35393.347410] PM: suspend entry (deep) [35393.349820] Filesystems sync: 0.002 seconds [35393.609330] Freezing user space processes [35393.612920] Freezing user space processes completed (elapsed 0.003 seconds) [35393.612928] OOM killer disabled. [35393.612930] Freezing remaining freezable tasks [35393.614202] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [35393.614326] printk: Suspending console(s) (use no_console_suspend to debug) [35394.200974] ACPI: EC: interrupt blocked [35394.323465] ACPI: PM: Preparing to enter system sleep state S3 [35394.350344] ACPI: EC: event blocked [35394.350347] ACPI: EC: EC stopped [35394.350348] ACPI: PM: Saving platform NVS memory [35394.350609] Disabling non-boot CPUs ... [35394.352701] smpboot: CPU 1 is now offline [35394.356401] smpboot: CPU 2 is now offline [35394.360665] smpboot: CPU 3 is now offline [35394.363814] smpboot: CPU 4 is now offline [35394.367526] smpboot: CPU 5 is now offline [35394.369558] smpboot: CPU 6 is now offline [35394.371918] smpboot: CPU 7 is now offline [35394.379338] ACPI: PM: Low-level resume complete [35394.379610] ACPI: EC: EC started [35394.379610] ACPI: PM: Restoring platform NVS memory [35394.381334] Enabling non-boot CPUs ... [35394.381401] x86: Booting SMP configuration: [35394.381402] smpboot: Booting Node 0 Processor 1 APIC 0x2 [35394.382772] CPU1 is up [35394.382803] smpboot: Booting Node 0 Processor 2 APIC 0x4 [35394.384029] CPU2 is up [35394.384056] smpboot: Booting Node 0 Processor 3 APIC 0x6 [35394.385231] CPU3 is up [35394.385254] smpboot: Booting Node 0 Processor 4 APIC 0x1 [35394.386557] CPU4 is up [35394.386582] smpboot: Booting Node 0 Processor 5 APIC 0x3 [35394.387834] CPU5 is up [35394.387855] smpboot: Booting Node 0 Processor 6 APIC 0x5 [35394.389245] CPU6 is up [35394.389265] smpboot: Booting Node 0 Processor 7 APIC 0x7 [35394.390636] CPU7 is up [35394.401181] ACPI: PM: Waking up from system sleep state S3 [35394.446487] ACPI: EC: interrupt unblocked [35395.657564] ACPI: EC: event unblocked [35395.662812] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [35395.666341] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [35395.666348] usb usb1: root hub lost power or was reset [35395.666350] usb usb2: root hub lost power or was reset [35395.667085] mhi mhi0: Resuming from non M3 state (RESET) [35395.667091] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [35395.667099] mhi-pci-generic 0000:08:00.0: device recovery started [35395.694548] mhi mhi0: Requested to power ON [35395.694563] mhi mhi0: Power on setup success [35395.712301] nvme nvme0: 8/0/0 default/read/poll queues [35395.978476] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [35396.200126] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [35396.200355] OOM killer enabled. [35396.200358] Restarting tasks ... [35396.200619] usb 3-3: USB disconnect, device number 11 [35396.202077] mhi mhi0: Wait for device to enter SBL or Mission mode [35396.214153] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [35396.247972] done. [35396.248022] random: crng reseeded on system resumption [35396.326029] usb 3-3: new full-speed USB device number 12 using xhci_hcd [35396.475077] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [35396.475083] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [35396.475085] usb 3-3: SerialNumber: ... [35396.493968] thermal thermal_zone6: failed to read out thermal zone (-61) [35396.571052] PM: suspend exit [35396.835936] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [35398.974302] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [35400.194788] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [35400.197658] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [35400.258666] wlp0s20f3: authenticated [35400.262329] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [35400.269482] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=2) [35400.275691] wlp0s20f3: associated [35400.294731] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [35400.347202] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [35403.454005] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [36325.413043] lockdown_is_locked_down: 2 callbacks suppressed [36325.443236] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [36325.935657] PM: suspend entry (deep) [36325.937574] Filesystems sync: 0.001 seconds [36326.053886] Freezing user space processes [36326.086512] Freezing user space processes completed (elapsed 0.032 seconds) [36326.086521] OOM killer disabled. [36326.086523] Freezing remaining freezable tasks [36326.087974] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [36326.088084] printk: Suspending console(s) (use no_console_suspend to debug) [36326.545045] ACPI: EC: interrupt blocked [36326.659724] ACPI: PM: Preparing to enter system sleep state S3 [36326.686425] ACPI: EC: event blocked [36326.686427] ACPI: EC: EC stopped [36326.686428] ACPI: PM: Saving platform NVS memory [36326.686713] Disabling non-boot CPUs ... [36326.688872] smpboot: CPU 1 is now offline [36326.693702] smpboot: CPU 2 is now offline [36326.695870] smpboot: CPU 3 is now offline [36326.699255] smpboot: CPU 4 is now offline [36326.701276] smpboot: CPU 5 is now offline [36326.703177] smpboot: CPU 6 is now offline [36326.705034] smpboot: CPU 7 is now offline [36326.711829] ACPI: PM: Low-level resume complete [36326.712113] ACPI: EC: EC started [36326.712114] ACPI: PM: Restoring platform NVS memory [36326.714355] Enabling non-boot CPUs ... [36326.714400] x86: Booting SMP configuration: [36326.714401] smpboot: Booting Node 0 Processor 1 APIC 0x2 [36326.715403] CPU1 is up [36326.715432] smpboot: Booting Node 0 Processor 2 APIC 0x4 [36326.716550] CPU2 is up [36326.716573] smpboot: Booting Node 0 Processor 3 APIC 0x6 [36326.717746] CPU3 is up [36326.717768] smpboot: Booting Node 0 Processor 4 APIC 0x1 [36326.719009] CPU4 is up [36326.719035] smpboot: Booting Node 0 Processor 5 APIC 0x3 [36326.720086] CPU5 is up [36326.720107] smpboot: Booting Node 0 Processor 6 APIC 0x5 [36326.721396] CPU6 is up [36326.721416] smpboot: Booting Node 0 Processor 7 APIC 0x7 [36326.722784] CPU7 is up [36326.729422] ACPI: PM: Waking up from system sleep state S3 [36326.775808] ACPI: EC: interrupt unblocked [36327.997136] ACPI: EC: event unblocked [36328.000948] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [36328.004129] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [36328.004132] usb usb1: root hub lost power or was reset [36328.004133] usb usb2: root hub lost power or was reset [36328.004297] mhi mhi0: Resuming from non M3 state (RESET) [36328.004299] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [36328.004303] mhi-pci-generic 0000:08:00.0: device recovery started [36328.030259] mhi mhi0: Requested to power ON [36328.030274] mhi mhi0: Power on setup success [36328.052289] nvme nvme0: 8/0/0 default/read/poll queues [36328.314149] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [36328.527444] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [36328.527673] OOM killer enabled. [36328.527677] Restarting tasks ... [36328.527767] usb 3-3: USB disconnect, device number 12 [36328.537676] mhi mhi0: Wait for device to enter SBL or Mission mode [36328.538192] done. [36328.538209] random: crng reseeded on system resumption [36328.545449] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [36328.601281] thermal thermal_zone6: failed to read out thermal zone (-61) [36328.661665] usb 3-3: new full-speed USB device number 13 using xhci_hcd [36328.745397] PM: suspend exit [36328.816287] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [36328.816296] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [36328.816298] usb 3-3: SerialNumber: ... [36329.012295] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [36331.377920] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [36332.561266] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [36332.564190] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [36332.621536] wlp0s20f3: authenticated [36332.625957] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [36332.632654] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=6) [36332.638251] wlp0s20f3: associated [36332.657209] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [36332.742905] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [36336.140776] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [36692.193912] lockdown_is_locked_down: 2 callbacks suppressed [36692.334200] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [36692.803703] PM: suspend entry (deep) [36692.808254] Filesystems sync: 0.004 seconds [36693.066841] Freezing user space processes [36693.070043] Freezing user space processes completed (elapsed 0.003 seconds) [36693.070051] OOM killer disabled. [36693.070053] Freezing remaining freezable tasks [36693.071151] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [36693.071270] printk: Suspending console(s) (use no_console_suspend to debug) [36693.652794] ACPI: EC: interrupt blocked [36693.792544] ACPI: PM: Preparing to enter system sleep state S3 [36693.819196] ACPI: EC: event blocked [36693.819198] ACPI: EC: EC stopped [36693.819199] ACPI: PM: Saving platform NVS memory [36693.819538] Disabling non-boot CPUs ... [36693.821809] smpboot: CPU 1 is now offline [36693.826740] smpboot: CPU 2 is now offline [36693.829614] smpboot: CPU 3 is now offline [36693.834374] smpboot: CPU 4 is now offline [36693.838062] smpboot: CPU 5 is now offline [36693.840702] smpboot: CPU 6 is now offline [36693.843121] smpboot: CPU 7 is now offline [36693.850611] ACPI: PM: Low-level resume complete [36693.850700] ACPI: EC: EC started [36693.850701] ACPI: PM: Restoring platform NVS memory [36693.852309] Enabling non-boot CPUs ... [36693.852376] x86: Booting SMP configuration: [36693.852377] smpboot: Booting Node 0 Processor 1 APIC 0x2 [36693.853477] CPU1 is up [36693.853512] smpboot: Booting Node 0 Processor 2 APIC 0x4 [36693.854722] CPU2 is up [36693.854743] smpboot: Booting Node 0 Processor 3 APIC 0x6 [36693.855895] CPU3 is up [36693.855915] smpboot: Booting Node 0 Processor 4 APIC 0x1 [36693.857172] CPU4 is up [36693.857198] smpboot: Booting Node 0 Processor 5 APIC 0x3 [36693.858417] CPU5 is up [36693.858437] smpboot: Booting Node 0 Processor 6 APIC 0x5 [36693.859718] CPU6 is up [36693.859741] smpboot: Booting Node 0 Processor 7 APIC 0x7 [36693.861153] CPU7 is up [36693.871792] ACPI: PM: Waking up from system sleep state S3 [36693.920771] ACPI: EC: interrupt unblocked [36695.126168] ACPI: EC: event unblocked [36695.130276] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [36695.135189] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [36695.135195] usb usb1: root hub lost power or was reset [36695.135198] usb usb2: root hub lost power or was reset [36695.136002] mhi mhi0: Resuming from non M3 state (RESET) [36695.136009] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [36695.136021] mhi-pci-generic 0000:08:00.0: device recovery started [36695.155090] mhi mhi0: Requested to power ON [36695.155100] mhi mhi0: Power on setup success [36695.181013] nvme nvme0: 8/0/0 default/read/poll queues [36695.447162] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [36695.658878] mhi mhi0: Wait for device to enter SBL or Mission mode [36695.704591] OOM killer enabled. [36695.704594] Restarting tasks ... [36695.704581] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [36695.705229] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [36695.705399] usb 3-3: USB disconnect, device number 13 [36695.716418] done. [36695.716451] random: crng reseeded on system resumption [36695.902731] usb 3-3: new full-speed USB device number 14 using xhci_hcd [36695.991217] thermal thermal_zone6: failed to read out thermal zone (-61) [36696.052215] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [36696.052224] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [36696.052227] usb 3-3: SerialNumber: ... [36696.158025] PM: suspend exit [36696.239907] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [36698.506967] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [36700.272232] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [36700.275320] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [36700.324930] wlp0s20f3: authenticated [36700.327013] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [36700.332743] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=6) [36700.338773] wlp0s20f3: associated [36700.412337] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [36700.412394] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [36702.850023] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [37474.325730] lockdown_is_locked_down: 3 callbacks suppressed [40645.242618] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [40646.816407] PM: suspend entry (deep) [40646.818296] Filesystems sync: 0.001 seconds [40646.936574] Freezing user space processes [40646.939784] Freezing user space processes completed (elapsed 0.003 seconds) [40646.939791] OOM killer disabled. [40646.939792] Freezing remaining freezable tasks [40646.941107] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [40646.941218] printk: Suspending console(s) (use no_console_suspend to debug) [40647.468670] ACPI: EC: interrupt blocked [40647.582634] ACPI: PM: Preparing to enter system sleep state S3 [40647.609518] ACPI: EC: event blocked [40647.609521] ACPI: EC: EC stopped [40647.609522] ACPI: PM: Saving platform NVS memory [40647.609823] Disabling non-boot CPUs ... [40647.612063] smpboot: CPU 1 is now offline [40647.616413] smpboot: CPU 2 is now offline [40647.619355] smpboot: CPU 3 is now offline [40647.621369] smpboot: CPU 4 is now offline [40647.623384] smpboot: CPU 5 is now offline [40647.625141] smpboot: CPU 6 is now offline [40647.626855] smpboot: CPU 7 is now offline [40647.633605] ACPI: PM: Low-level resume complete [40647.633877] ACPI: EC: EC started [40647.633877] ACPI: PM: Restoring platform NVS memory [40647.635586] Enabling non-boot CPUs ... [40647.635656] x86: Booting SMP configuration: [40647.635656] smpboot: Booting Node 0 Processor 1 APIC 0x2 [40647.636816] CPU1 is up [40647.636852] smpboot: Booting Node 0 Processor 2 APIC 0x4 [40647.638088] CPU2 is up [40647.638111] smpboot: Booting Node 0 Processor 3 APIC 0x6 [40647.639321] CPU3 is up [40647.639343] smpboot: Booting Node 0 Processor 4 APIC 0x1 [40647.640620] CPU4 is up [40647.640646] smpboot: Booting Node 0 Processor 5 APIC 0x3 [40647.641708] CPU5 is up [40647.641730] smpboot: Booting Node 0 Processor 6 APIC 0x5 [40647.643058] CPU6 is up [40647.643078] smpboot: Booting Node 0 Processor 7 APIC 0x7 [40647.644461] CPU7 is up [40647.651317] ACPI: PM: Waking up from system sleep state S3 [40647.697835] ACPI: EC: interrupt unblocked [40648.920312] ACPI: EC: event unblocked [40648.920872] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [40648.927137] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [40648.927140] usb usb1: root hub lost power or was reset [40648.927141] usb usb2: root hub lost power or was reset [40648.927351] mhi mhi0: Resuming from non M3 state (RESET) [40648.927353] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [40648.927357] mhi-pci-generic 0000:08:00.0: device recovery started [40648.941249] mhi mhi0: Requested to power ON [40648.941264] mhi mhi0: Power on setup success [40648.974134] nvme nvme0: 8/0/0 default/read/poll queues [40649.237295] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [40649.444979] mhi mhi0: Wait for device to enter SBL or Mission mode [40649.546652] OOM killer enabled. [40649.546655] Restarting tasks ... [40649.546649] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [40649.547342] usb 3-3: USB disconnect, device number 14 [40649.547295] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [40649.556608] done. [40649.556628] random: crng reseeded on system resumption [40649.680900] usb 3-3: new full-speed USB device number 15 using xhci_hcd [40649.831130] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [40649.831139] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [40649.831143] usb 3-3: SerialNumber: ... [40649.866072] thermal thermal_zone6: failed to read out thermal zone (-61) [40649.940776] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [40649.943573] PM: suspend exit [40652.268953] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [40653.912304] wlp0s20f3: authenticate with 4392CBF08C375D29100227C36397C70D [40653.912340] wlp0s20f3: 80 MHz not supported, disabling VHT [40653.914678] wlp0s20f3: send auth to 4392CBF08C375D29100227C36397C70D (try 1/3) [40653.970253] wlp0s20f3: authenticated [40653.972964] wlp0s20f3: associate with 4392CBF08C375D29100227C36397C70D (try 1/3) [40653.989104] wlp0s20f3: RX AssocResp from 4392CBF08C375D29100227C36397C70D (capab=0x1431 status=0 aid=1) [40653.996698] wlp0s20f3: associated [40654.254779] wlp0s20f3: Limiting TX power to 20 (20 - 0) dBm as advertised by 4392CBF08C375D29100227C36397C70D [40654.315531] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [40656.661670] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [42637.282851] wlp0s20f3: Connection to AP 4392CBF08C375D29100227C36397C70D lost [42639.166978] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [42639.176345] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [42639.214361] wlp0s20f3: authenticated [42639.215735] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [42639.223766] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [42639.232028] wlp0s20f3: associated [42639.320180] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [47454.115973] lockdown_is_locked_down: 6 callbacks suppressed [48427.225772] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [48427.670172] PM: suspend entry (deep) [48427.672928] Filesystems sync: 0.002 seconds [48427.931533] Freezing user space processes [48427.935149] Freezing user space processes completed (elapsed 0.003 seconds) [48427.935157] OOM killer disabled. [48427.935159] Freezing remaining freezable tasks [48427.936386] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [48427.936506] printk: Suspending console(s) (use no_console_suspend to debug) [48428.515981] ACPI: EC: interrupt blocked [48428.637681] ACPI: PM: Preparing to enter system sleep state S3 [48428.664220] ACPI: EC: event blocked [48428.664222] ACPI: EC: EC stopped [48428.664223] ACPI: PM: Saving platform NVS memory [48428.664472] Disabling non-boot CPUs ... [48428.666659] smpboot: CPU 1 is now offline [48428.669656] smpboot: CPU 2 is now offline [48428.672760] smpboot: CPU 3 is now offline [48428.679328] smpboot: CPU 4 is now offline [48428.682368] smpboot: CPU 5 is now offline [48428.684563] smpboot: CPU 6 is now offline [48428.686985] smpboot: CPU 7 is now offline [48428.694613] ACPI: PM: Low-level resume complete [48428.694710] ACPI: EC: EC started [48428.694711] ACPI: PM: Restoring platform NVS memory [48428.696692] Enabling non-boot CPUs ... [48428.696737] x86: Booting SMP configuration: [48428.696738] smpboot: Booting Node 0 Processor 1 APIC 0x2 [48428.697719] CPU1 is up [48428.697748] smpboot: Booting Node 0 Processor 2 APIC 0x4 [48428.698862] CPU2 is up [48428.698887] smpboot: Booting Node 0 Processor 3 APIC 0x6 [48428.699928] CPU3 is up [48428.699952] smpboot: Booting Node 0 Processor 4 APIC 0x1 [48428.701212] CPU4 is up [48428.701238] smpboot: Booting Node 0 Processor 5 APIC 0x3 [48428.702283] CPU5 is up [48428.702303] smpboot: Booting Node 0 Processor 6 APIC 0x5 [48428.703786] CPU6 is up [48428.703808] smpboot: Booting Node 0 Processor 7 APIC 0x7 [48428.705376] CPU7 is up [48428.716171] ACPI: PM: Waking up from system sleep state S3 [48428.762050] ACPI: EC: interrupt unblocked [48429.974840] ACPI: EC: event unblocked [48429.978625] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [48429.982964] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [48429.982971] usb usb1: root hub lost power or was reset [48429.982974] usb usb2: root hub lost power or was reset [48429.983622] mhi mhi0: Resuming from non M3 state (RESET) [48429.983626] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [48429.983735] mhi-pci-generic 0000:08:00.0: device recovery started [48430.011866] mhi mhi0: Requested to power ON [48430.011880] mhi mhi0: Power on setup success [48430.029541] nvme nvme0: 8/0/0 default/read/poll queues [48430.295862] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [48430.497189] OOM killer enabled. [48430.497191] Restarting tasks ... [48430.497135] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [48430.497306] usb 3-3: USB disconnect, device number 15 [48430.505101] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [48430.505652] done. [48430.505692] random: crng reseeded on system resumption [48430.515396] mhi mhi0: Wait for device to enter SBL or Mission mode [48430.691409] usb 3-3: new full-speed USB device number 16 using xhci_hcd [48430.841686] thermal thermal_zone6: failed to read out thermal zone (-61) [48430.842077] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [48430.842082] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [48430.842084] usb 3-3: SerialNumber: ... [48430.931792] PM: suspend exit [48431.053320] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [48433.323444] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [48434.767710] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [48434.770440] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [48434.833332] wlp0s20f3: authenticated [48434.835271] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [48434.841558] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=6) [48434.846807] wlp0s20f3: associated [48434.943973] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [48434.944047] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [48437.857799] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [49442.117063] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [49442.650553] PM: suspend entry (deep) [49442.653143] Filesystems sync: 0.002 seconds [49442.911569] Freezing user space processes [49442.915228] Freezing user space processes completed (elapsed 0.003 seconds) [49442.915236] OOM killer disabled. [49442.915238] Freezing remaining freezable tasks [49442.916597] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [49442.916720] printk: Suspending console(s) (use no_console_suspend to debug) [49443.495928] ACPI: EC: interrupt blocked [49443.625150] ACPI: PM: Preparing to enter system sleep state S3 [49443.651945] ACPI: EC: event blocked [49443.651948] ACPI: EC: EC stopped [49443.651949] ACPI: PM: Saving platform NVS memory [49443.652173] Disabling non-boot CPUs ... [49443.654368] smpboot: CPU 1 is now offline [49443.657191] smpboot: CPU 2 is now offline [49443.659985] smpboot: CPU 3 is now offline [49443.664661] smpboot: CPU 4 is now offline [49443.666994] smpboot: CPU 5 is now offline [49443.669238] smpboot: CPU 6 is now offline [49443.671569] smpboot: CPU 7 is now offline [49443.678585] ACPI: PM: Low-level resume complete [49443.678675] ACPI: EC: EC started [49443.678676] ACPI: PM: Restoring platform NVS memory [49443.679938] Enabling non-boot CPUs ... [49443.679976] x86: Booting SMP configuration: [49443.679977] smpboot: Booting Node 0 Processor 1 APIC 0x2 [49443.680982] CPU1 is up [49443.681014] smpboot: Booting Node 0 Processor 2 APIC 0x4 [49443.682187] CPU2 is up [49443.682209] smpboot: Booting Node 0 Processor 3 APIC 0x6 [49443.683477] CPU3 is up [49443.683499] smpboot: Booting Node 0 Processor 4 APIC 0x1 [49443.684747] CPU4 is up [49443.684773] smpboot: Booting Node 0 Processor 5 APIC 0x3 [49443.686115] CPU5 is up [49443.686150] smpboot: Booting Node 0 Processor 6 APIC 0x5 [49443.687467] CPU6 is up [49443.687488] smpboot: Booting Node 0 Processor 7 APIC 0x7 [49443.688887] CPU7 is up [49443.699548] ACPI: PM: Waking up from system sleep state S3 [49443.750490] ACPI: EC: interrupt unblocked [49444.978169] ACPI: EC: event unblocked [49444.982421] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [49444.987892] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [49444.987899] usb usb1: root hub lost power or was reset [49444.987902] usb usb2: root hub lost power or was reset [49444.988629] mhi mhi0: Resuming from non M3 state (RESET) [49444.988634] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [49444.988650] mhi-pci-generic 0000:08:00.0: device recovery started [49445.015106] mhi mhi0: Requested to power ON [49445.015117] mhi mhi0: Power on setup success [49445.033661] nvme nvme0: 8/0/0 default/read/poll queues [49445.303081] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [49445.463052] OOM killer enabled. [49445.463054] Restarting tasks ... [49445.463109] usb 3-3: USB disconnect, device number 16 [49445.463156] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [49445.463800] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [49445.472345] done. [49445.472385] random: crng reseeded on system resumption [49445.482785] mhi mhi0: Wait for device to enter SBL or Mission mode [49445.594746] usb 3-3: new full-speed USB device number 17 using xhci_hcd [49445.748724] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [49445.748733] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [49445.748736] usb 3-3: SerialNumber: ... [49445.833877] thermal thermal_zone6: failed to read out thermal zone (-61) [49445.973962] PM: suspend exit [49445.992672] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [49448.102727] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [49449.923731] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [49449.926602] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [49449.979591] wlp0s20f3: authenticated [49449.986777] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [49449.995905] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=6) [49450.001631] wlp0s20f3: associated [49450.010769] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [49450.111304] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [49452.737490] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [51374.630862] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [51375.047073] PM: suspend entry (deep) [51375.049570] Filesystems sync: 0.002 seconds [51375.309725] Freezing user space processes [51375.312998] Freezing user space processes completed (elapsed 0.003 seconds) [51375.313006] OOM killer disabled. [51375.313007] Freezing remaining freezable tasks [51375.314385] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [51375.314503] printk: Suspending console(s) (use no_console_suspend to debug) [51375.892479] ACPI: EC: interrupt blocked [51376.003729] ACPI: PM: Preparing to enter system sleep state S3 [51376.030572] ACPI: EC: event blocked [51376.030575] ACPI: EC: EC stopped [51376.030576] ACPI: PM: Saving platform NVS memory [51376.030807] Disabling non-boot CPUs ... [51376.034607] smpboot: CPU 1 is now offline [51376.037427] smpboot: CPU 2 is now offline [51376.040182] smpboot: CPU 3 is now offline [51376.043601] smpboot: CPU 4 is now offline [51376.046508] smpboot: CPU 5 is now offline [51376.049094] smpboot: CPU 6 is now offline [51376.051735] smpboot: CPU 7 is now offline [51376.058983] ACPI: PM: Low-level resume complete [51376.059255] ACPI: EC: EC started [51376.059256] ACPI: PM: Restoring platform NVS memory [51376.061549] Enabling non-boot CPUs ... [51376.061596] x86: Booting SMP configuration: [51376.061596] smpboot: Booting Node 0 Processor 1 APIC 0x2 [51376.062588] CPU1 is up [51376.062616] smpboot: Booting Node 0 Processor 2 APIC 0x4 [51376.063778] CPU2 is up [51376.063800] smpboot: Booting Node 0 Processor 3 APIC 0x6 [51376.064958] CPU3 is up [51376.064978] smpboot: Booting Node 0 Processor 4 APIC 0x1 [51376.066290] CPU4 is up [51376.066321] smpboot: Booting Node 0 Processor 5 APIC 0x3 [51376.067876] CPU5 is up [51376.067900] smpboot: Booting Node 0 Processor 6 APIC 0x5 [51376.069279] CPU6 is up [51376.069301] smpboot: Booting Node 0 Processor 7 APIC 0x7 [51376.070729] CPU7 is up [51376.081343] ACPI: PM: Waking up from system sleep state S3 [51376.135112] ACPI: EC: interrupt unblocked [51377.349562] ACPI: EC: event unblocked [51377.353474] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [51377.358945] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [51377.358956] usb usb1: root hub lost power or was reset [51377.358961] usb usb2: root hub lost power or was reset [51377.359232] mhi mhi0: Resuming from non M3 state (RESET) [51377.359237] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [51377.359250] mhi-pci-generic 0000:08:00.0: device recovery started [51377.382612] mhi mhi0: Requested to power ON [51377.382627] mhi mhi0: Power on setup success [51377.403832] nvme nvme0: 8/0/0 default/read/poll queues [51377.670682] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [51377.886243] mhi mhi0: Wait for device to enter SBL or Mission mode [51377.917510] OOM killer enabled. [51377.917513] Restarting tasks ... [51377.917460] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [51377.917593] usb 3-3: USB disconnect, device number 17 [51377.934943] done. [51377.934977] random: crng reseeded on system resumption [51377.936304] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [51378.050116] usb 3-3: new full-speed USB device number 18 using xhci_hcd [51378.211380] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [51378.211386] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [51378.211387] usb 3-3: SerialNumber: ... [51378.358157] usb 3-6: new high-speed USB device number 19 using xhci_hcd [51378.363922] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [51378.418475] thermal thermal_zone6: failed to read out thermal zone (-61) [51378.509721] usb 3-6: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.60 [51378.509731] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [51378.509735] usb 3-6: Product: USB2.1 Hub [51378.509738] usb 3-6: Manufacturer: GenesysLogic [51378.511613] hub 3-6:1.0: USB hub found [51378.511864] hub 3-6:1.0: 2 ports detected [51378.633540] PM: suspend exit [51378.822302] usb 3-6.1: new high-speed USB device number 20 using xhci_hcd [51378.953109] usb 3-6.1: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.71 [51378.953115] usb 3-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [51378.953117] usb 3-6.1: Product: USB2.1 Hub [51378.953118] usb 3-6.1: Manufacturer: GenesysLogic [51378.955710] hub 3-6.1:1.0: USB hub found [51378.956388] hub 3-6.1:1.0: 4 ports detected [51379.153422] BUG: kernel NULL pointer dereference, address: 0000000000000000 [51379.153432] #PF: supervisor read access in kernel mode [51379.153436] #PF: error_code(0x0000) - not-present page [51379.153440] PGD 0 P4D 0 [51379.153446] Oops: 0000 [#1] PREEMPT SMP NOPTI [51379.153452] CPU: 4 PID: 63216 Comm: kworker/u16:32 Not tainted 6.2.0-34-generic #34-Ubuntu [51379.153457] Hardware name: LENOVO 20XY005MGE/20XY005MGE, BIOS N32ET86W (1.62 ) 07/12/2023 [51379.153461] Workqueue: USBC000:00-con2 ucsi_poll_worker [typec_ucsi] RIP: 0010:ucsi_acpi_async_write+0x31/0x60 [ucsi_acpi] Code: 89 e5 41 56 49 89 ce 41 55 49 89 d5 41 54 53 89 f3 e8 83 9b 23 00 4c 89 f2 4c 89 ee 89 df 48 03 78 10 49 89 c4 e8 7f 3e 7e c7 <49> 8b 45 00 4c 89 e7 be 01 00 00 00 49 89 44 24 50 e8 c9 fc ff ff [51379.153498] RSP: 0018:ffffb0d2c3ebfd58 EFLAGS: 00010282 [51379.153502] RAX: ffffb0d2c0125002 RBX: 0000000000000002 RCX: 0000000000000000 [51379.153505] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0d2c0125002 [51379.153507] RBP: ffffb0d2c3ebfd78 R08: 0000000000000000 R09: 0000000000000000 [51379.153510] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9d618b22b128 [51379.153512] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d61831641b8 [51379.153514] FS: 0000000000000000(0000) GS:ffff9d68bf700000(0000) knlGS:0000000000000000 [51379.153518] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [51379.153521] CR2: 0000000000000000 CR3: 0000000124c38006 CR4: 0000000000770ee0 [51379.153524] PKRU: 55555554 [51379.153525] Call Trace: [51379.153528] <TASK> [51379.153535] ? show_regs+0x6d/0x80 [51379.153544] ? __die+0x24/0x80 [51379.153548] ? page_fault_oops+0x99/0x1b0 [51379.153556] ? do_user_addr_fault+0x2f3/0x620 [51379.153560] ? exc_page_fault+0x80/0x1b0 [51379.153567] ? asm_exc_page_fault+0x27/0x30 [51379.153575] ? ucsi_acpi_async_write+0x31/0x60 [ucsi_acpi] ? ucsi_acpi_async_write+0x31/0x60 [ucsi_acpi] ucsi_exec_command+0xdf/0x100 [typec_ucsi] ucsi_send_command+0x4b/0xf0 [typec_ucsi] ucsi_get_pdos.constprop.0.isra.0+0x50/0xa0 [typec_ucsi] ucsi_get_src_pdos+0xa6/0x110 [typec_ucsi] ucsi_poll_worker+0x3d/0xf0 [typec_ucsi] process_one_work+0x222/0x430 [51379.153663] worker_thread+0x50/0x3e0 [51379.153667] ? __pfx_worker_thread+0x10/0x10 [51379.153671] kthread+0xe6/0x110 [51379.153677] ? __pfx_kthread+0x10/0x10 [51379.153682] ret_from_fork+0x29/0x50 [51379.153690] </TASK> [51379.153692] Modules linked in: ccm rfcomm cmac algif_hash algif_skcipher af_alg snd_seq_dummy snd_hrtimer snd_ctl_led snd_soc_skl_hda_dsp snd_soc_intel_hda_dsp_common snd_soc_hdac_hdmi snd_sof_probes snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic bnep uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 btusb videodev btrtl videobuf2_common btbcm mc btintel btmtk bluetooth ecdh_generic ecc snd_soc_dmic snd_sof_pci_intel_tgl snd_sof_intel_hda_common soundwire_intel binfmt_misc soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof_pci snd_sof_xtensa_dsp nls_iso8859_1 snd_sof snd_sof_utils snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi intel_tcc_cooling soundwire_bus x86_pkg_temp_thermal intel_powerclamp snd_soc_core coretemp snd_compress ac97_bus snd_pcm_dmaengine kvm_intel snd_hda_intel snd_intel_dspcfg kvm i915 snd_intel_sdw_acpi snd_hda_codec irqbypass snd_hda_core crct10dif_pclmul polyval_clmulni snd_hwdep [51379.153769] polyval_generic ghash_clmulni_intel iwlmvm snd_pcm sha512_ssse3 pmt_telemetry drm_buddy intel_rapl_msr mei_hdcp mei_pxp pmt_class aesni_intel ttm snd_seq_midi mac80211 crypto_simd drm_display_helper snd_seq_midi_event cryptd processor_thermal_device_pci_legacy processor_thermal_device snd_rawmidi cec libarc4 processor_thermal_rfim rapl hid_sensor_accel_3d hid_sensor_custom_intel_hinge hid_sensor_gyro_3d rc_core snd_seq processor_thermal_mbox intel_cstate thinkpad_acpi cmdlinepart hid_sensor_trigger drm_kms_helper spi_nor iwlwifi snd_seq_device processor_thermal_rapl think_lmi industrialio_triggered_buffer firmware_attributes_class wmi_bmof mtd nvram snd_timer i2c_algo_bit nxp_nci_i2c kfifo_buf mei_me snd hid_sensor_iio_common syscopyarea nxp_nci intel_rapl_common cfg80211 nci sysfillrect industrialio mei intel_soc_dts_iosf sysimgblt igen6_edac intel_vsec nfc soundcore ledtrig_audio int3403_thermal int340x_thermal_zone platform_profile soc_button_array int3400_thermal [51379.153849] intel_hid acpi_tad acpi_pad acpi_thermal_rel sparse_keymap input_leds joydev serio_raw mac_hid hid_multitouch msr parport_pc ppdev drm lp parport efi_pstore dmi_sysfs ip_tables x_tables autofs4 hid_sensor_custom hid_sensor_hub intel_ishtp_hid mhi_wwan_mbim mhi_wwan_ctrl wacom usbhid hid_generic ucsi_acpi nvme intel_lpss_pci typec_ucsi i2c_i801 spi_intel_pci mhi_pci_generic i2c_hid_acpi intel_lpss intel_ish_ipc nvme_core crc32_pclmul psmouse typec video xhci_pci i2c_smbus spi_intel thunderbolt intel_ishtp mhi i2c_hid idma64 nvme_common xhci_pci_renesas hid wmi pinctrl_tigerlake [51379.153923] CR2: 0000000000000000 [51379.153927] ---[ end trace 0000000000000000 ]--- [51379.375394] RIP: 0010:ucsi_acpi_async_write+0x31/0x60 [ucsi_acpi] Code: 89 e5 41 56 49 89 ce 41 55 49 89 d5 41 54 53 89 f3 e8 83 9b 23 00 4c 89 f2 4c 89 ee 89 df 48 03 78 10 49 89 c4 e8 7f 3e 7e c7 <49> 8b 45 00 4c 89 e7 be 01 00 00 00 49 89 44 24 50 e8 c9 fc ff ff [51379.375416] RSP: 0018:ffffb0d2c3ebfd58 EFLAGS: 00010282 [51379.375419] RAX: ffffb0d2c0125002 RBX: 0000000000000002 RCX: 0000000000000000 [51379.375420] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0d2c0125002 [51379.375422] RBP: ffffb0d2c3ebfd78 R08: 0000000000000000 R09: 0000000000000000 [51379.375423] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9d618b22b128 [51379.375424] R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d61831641b8 [51379.375425] FS: 0000000000000000(0000) GS:ffff9d68bf700000(0000) knlGS:0000000000000000 [51379.375426] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [51379.375428] CR2: 0000000000000000 CR3: 0000000124c38001 CR4: 0000000000770ee0 [51379.375429] PKRU: 55555554 [51379.375430] note: kworker/u16:32[63216] exited with irqs disabled [51380.634210] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [51383.207750] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [51383.210198] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [51383.270241] wlp0s20f3: authenticated [51383.274165] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [51383.282184] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=4) [51383.289425] wlp0s20f3: associated [51383.340583] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [51383.354990] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [51385.270597] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [54050.244388] usb 3-6: USB disconnect, device number 19 [54050.244394] usb 3-6.1: USB disconnect, device number 20 [54058.701402] lockdown_is_locked_down: 3 callbacks suppressed [54058.752883] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [54060.123690] PM: suspend entry (deep) [54060.126507] Filesystems sync: 0.002 seconds [54060.383836] Freezing user space processes [54060.386861] Freezing user space processes completed (elapsed 0.003 seconds) [54060.386869] OOM killer disabled. [54060.386872] Freezing remaining freezable tasks [54060.388237] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [54060.388350] printk: Suspending console(s) (use no_console_suspend to debug) [54060.971867] ACPI: EC: interrupt blocked [54061.101616] ACPI: PM: Preparing to enter system sleep state S3 [54061.128384] ACPI: EC: event blocked [54061.128386] ACPI: EC: EC stopped [54061.128387] ACPI: PM: Saving platform NVS memory [54061.128630] Disabling non-boot CPUs ... [54061.130839] smpboot: CPU 1 is now offline [54061.137161] smpboot: CPU 2 is now offline [54061.140186] smpboot: CPU 3 is now offline [54061.143538] smpboot: CPU 4 is now offline [54061.147147] smpboot: CPU 5 is now offline [54061.149470] smpboot: CPU 6 is now offline [54061.151800] smpboot: CPU 7 is now offline [54061.159222] ACPI: PM: Low-level resume complete [54061.159319] ACPI: EC: EC started [54061.159320] ACPI: PM: Restoring platform NVS memory [54061.161069] Enabling non-boot CPUs ... [54061.161108] x86: Booting SMP configuration: [54061.161109] smpboot: Booting Node 0 Processor 1 APIC 0x2 [54061.162114] CPU1 is up [54061.162141] smpboot: Booting Node 0 Processor 2 APIC 0x4 [54061.163276] CPU2 is up [54061.163297] smpboot: Booting Node 0 Processor 3 APIC 0x6 [54061.164461] CPU3 is up [54061.164481] smpboot: Booting Node 0 Processor 4 APIC 0x1 [54061.165731] CPU4 is up [54061.165756] smpboot: Booting Node 0 Processor 5 APIC 0x3 [54061.167033] CPU5 is up [54061.167054] smpboot: Booting Node 0 Processor 6 APIC 0x5 [54061.168264] CPU6 is up [54061.168284] smpboot: Booting Node 0 Processor 7 APIC 0x7 [54061.169755] CPU7 is up [54061.180614] ACPI: PM: Waking up from system sleep state S3 [54061.227148] ACPI: EC: interrupt unblocked [54062.447069] ACPI: EC: event unblocked [54062.451177] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [54062.456124] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [54062.456131] usb usb1: root hub lost power or was reset [54062.456134] usb usb2: root hub lost power or was reset [54062.456747] mhi mhi0: Resuming from non M3 state (RESET) [54062.456755] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [54062.456767] mhi-pci-generic 0000:08:00.0: device recovery started [54062.472131] mhi mhi0: Requested to power ON [54062.472145] mhi mhi0: Power on setup success [54062.504671] nvme nvme0: 8/0/0 default/read/poll queues [54062.768029] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [54062.928693] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [54062.928933] OOM killer enabled. [54062.928935] Restarting tasks ... [54062.930453] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [54062.947789] done. [54062.947828] random: crng reseeded on system resumption [54062.955998] usb 3-3: USB disconnect, device number 18 [54062.975990] mhi mhi0: Wait for device to enter SBL or Mission mode [54063.017883] thermal thermal_zone6: failed to read out thermal zone (-61) [54063.070802] PM: suspend exit [54063.255516] usb 3-3: new full-speed USB device number 21 using xhci_hcd [54063.408565] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [54063.408575] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [54063.408578] usb 3-3: SerialNumber: ... [54063.558717] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [54065.795606] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [54066.863564] wlp0s20f3: authenticate with BAECCB844F0CC8FB1D250715BA822E26 [54066.866093] wlp0s20f3: send auth to BAECCB844F0CC8FB1D250715BA822E26 (try 1/3) [54066.923756] wlp0s20f3: authenticated [54066.923996] wlp0s20f3: VHT capa missing/short, disabling VHT/HE/EHT [54066.927431] wlp0s20f3: associate with BAECCB844F0CC8FB1D250715BA822E26 (try 1/3) [54066.929477] wlp0s20f3: RX AssocResp from BAECCB844F0CC8FB1D250715BA822E26 (capab=0x1111 status=0 aid=37) [54066.934988] wlp0s20f3: associated [54066.975619] wlp0s20f3: Limiting TX power to 14 dBm as advertised by BAECCB844F0CC8FB1D250715BA822E26 [54070.218567] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [54071.675567] wlp0s20f3: deauthenticating from BAECCB844F0CC8FB1D250715BA822E26 by local choice (Reason: 3=DEAUTH_LEAVING) [54083.634431] wlp0s20f3: authenticate with BAECCB844F0CC8FB1D250715BA822E26 [54083.640798] wlp0s20f3: send auth to BAECCB844F0CC8FB1D250715BA822E26 (try 1/3) [54083.671455] wlp0s20f3: authenticated [54083.671802] wlp0s20f3: VHT capa missing/short, disabling VHT/HE/EHT [54083.675299] wlp0s20f3: associate with BAECCB844F0CC8FB1D250715BA822E26 (try 1/3) [54083.705575] wlp0s20f3: RX AssocResp from BAECCB844F0CC8FB1D250715BA822E26 (capab=0x1111 status=0 aid=37) [54083.713467] wlp0s20f3: associated [54083.791877] wlp0s20f3: Limiting TX power to 14 dBm as advertised by BAECCB844F0CC8FB1D250715BA822E26 [54088.322825] lockdown_is_locked_down: 2 callbacks suppressed [54088.537478] wlp0s20f3: deauthenticating from BAECCB844F0CC8FB1D250715BA822E26 by local choice (Reason: 3=DEAUTH_LEAVING) [54094.777108] wlp0s20f3: authenticate with F1C521FFB7667764E000E04F69612F3A [54094.783275] wlp0s20f3: send auth to F1C521FFB7667764E000E04F69612F3A (try 1/3) [54094.810206] wlp0s20f3: authenticated [54094.810560] wlp0s20f3: VHT capa missing/short, disabling VHT/HE/EHT [54094.811068] wlp0s20f3: associate with F1C521FFB7667764E000E04F69612F3A (try 1/3) [54094.813377] wlp0s20f3: RX AssocResp from F1C521FFB7667764E000E04F69612F3A (capab=0x1101 status=0 aid=38) [54094.819546] wlp0s20f3: associated [54094.820955] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [54094.914125] wlp0s20f3: Limiting TX power to 14 dBm as advertised by F1C521FFB7667764E000E04F69612F3A [54101.260735] wlp0s20f3: disconnect from AP F1C521FFB7667764E000E04F69612F3A for new auth to A39F4821638085B02BB535F3B05AA0D8 [54101.294198] wlp0s20f3: authenticate with A39F4821638085B02BB535F3B05AA0D8 [54101.297017] wlp0s20f3: send auth to A39F4821638085B02BB535F3B05AA0D8 (try 1/3) [54101.324132] wlp0s20f3: authenticated [54101.324373] wlp0s20f3: VHT capa missing/short, disabling VHT/HE/EHT [54101.326955] wlp0s20f3: associate with A39F4821638085B02BB535F3B05AA0D8 (try 1/3) [54101.329118] wlp0s20f3: RX ReassocResp from A39F4821638085B02BB535F3B05AA0D8 (capab=0x1101 status=0 aid=1) [54101.335329] wlp0s20f3: associated [54101.398702] wlp0s20f3: Limiting TX power to 14 dBm as advertised by A39F4821638085B02BB535F3B05AA0D8 [54127.124313] wlp0s20f3: deauthenticating from A39F4821638085B02BB535F3B05AA0D8 by local choice (Reason: 3=DEAUTH_LEAVING) [54129.869559] wlp0s20f3: authenticate with F1C521FFB7667764E000E04F69612F3A [54129.877319] wlp0s20f3: send auth to F1C521FFB7667764E000E04F69612F3A (try 1/3) [54129.908467] wlp0s20f3: authenticated [54129.908768] wlp0s20f3: VHT capa missing/short, disabling VHT/HE/EHT [54129.914796] wlp0s20f3: associate with F1C521FFB7667764E000E04F69612F3A (try 1/3) [54129.918192] wlp0s20f3: RX AssocResp from F1C521FFB7667764E000E04F69612F3A (capab=0x1101 status=0 aid=37) [54129.941174] wlp0s20f3: associated [54129.951797] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [54130.015616] wlp0s20f3: Limiting TX power to 14 dBm as advertised by F1C521FFB7667764E000E04F69612F3A [54162.794987] wlp0s20f3: deauthenticating from F1C521FFB7667764E000E04F69612F3A by local choice (Reason: 3=DEAUTH_LEAVING) [54163.007897] wlp0s20f3: authenticate with F930EF369BD26F48D8ABB4A801CE63B4 [54163.007929] wlp0s20f3: 80 MHz not supported, disabling VHT [54163.014828] wlp0s20f3: send auth to F930EF369BD26F48D8ABB4A801CE63B4 (try 1/3) [54163.062257] wlp0s20f3: authenticated [54163.066113] wlp0s20f3: associate with F930EF369BD26F48D8ABB4A801CE63B4 (try 1/3) [54163.087679] wlp0s20f3: RX AssocResp from F930EF369BD26F48D8ABB4A801CE63B4 (capab=0x1431 status=0 aid=1) [54163.107757] wlp0s20f3: associated [54163.195965] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [54597.892098] wlp0s20f3: deauthenticating from F930EF369BD26F48D8ABB4A801CE63B4 by local choice (Reason: 3=DEAUTH_LEAVING) [54598.298458] PM: suspend entry (deep) [54598.301227] Filesystems sync: 0.002 seconds [54598.559717] Freezing user space processes [54598.562933] Freezing user space processes completed (elapsed 0.003 seconds) [54598.562942] OOM killer disabled. [54598.562944] Freezing remaining freezable tasks [54598.564365] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [54598.564487] printk: Suspending console(s) (use no_console_suspend to debug) [54599.144966] ACPI: EC: interrupt blocked [54599.281817] ACPI: PM: Preparing to enter system sleep state S3 [54599.308587] ACPI: EC: event blocked [54599.308590] ACPI: EC: EC stopped [54599.308591] ACPI: PM: Saving platform NVS memory [54599.308830] Disabling non-boot CPUs ... [54599.310982] smpboot: CPU 1 is now offline [54599.313783] smpboot: CPU 2 is now offline [54599.318083] smpboot: CPU 3 is now offline [54599.322248] smpboot: CPU 4 is now offline [54599.324709] smpboot: CPU 5 is now offline [54599.327303] smpboot: CPU 6 is now offline [54599.330097] smpboot: CPU 7 is now offline [54599.337765] ACPI: PM: Low-level resume complete [54599.338037] ACPI: EC: EC started [54599.338038] ACPI: PM: Restoring platform NVS memory [54599.340174] Enabling non-boot CPUs ... [54599.340208] x86: Booting SMP configuration: [54599.340208] smpboot: Booting Node 0 Processor 1 APIC 0x2 [54599.341199] CPU1 is up [54599.341228] smpboot: Booting Node 0 Processor 2 APIC 0x4 [54599.342337] CPU2 is up [54599.342360] smpboot: Booting Node 0 Processor 3 APIC 0x6 [54599.343513] CPU3 is up [54599.343534] smpboot: Booting Node 0 Processor 4 APIC 0x1 [54599.344731] CPU4 is up [54599.344756] smpboot: Booting Node 0 Processor 5 APIC 0x3 [54599.345932] CPU5 is up [54599.345954] smpboot: Booting Node 0 Processor 6 APIC 0x5 [54599.347244] CPU6 is up [54599.347263] smpboot: Booting Node 0 Processor 7 APIC 0x7 [54599.348662] CPU7 is up [54599.359790] ACPI: PM: Waking up from system sleep state S3 [54599.414140] ACPI: EC: interrupt unblocked [54600.623517] ACPI: EC: event unblocked [54600.627285] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [54600.632060] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [54600.632067] usb usb1: root hub lost power or was reset [54600.632070] usb usb2: root hub lost power or was reset [54600.633164] mhi mhi0: Resuming from non M3 state (RESET) [54600.633170] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [54600.633188] mhi-pci-generic 0000:08:00.0: device recovery started [54600.660532] mhi mhi0: Requested to power ON [54600.660545] mhi mhi0: Power on setup success [54600.678312] nvme nvme0: 8/0/0 default/read/poll queues [54600.944493] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [54601.145888] OOM killer enabled. [54601.145892] Restarting tasks ... [54601.145981] usb 3-3: USB disconnect, device number 21 [54601.145870] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [54601.154261] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [54601.156592] done. [54601.156635] random: crng reseeded on system resumption [54601.168042] mhi mhi0: Wait for device to enter SBL or Mission mode [54601.280009] usb 3-3: new full-speed USB device number 22 using xhci_hcd [54601.325356] thermal thermal_zone6: failed to read out thermal zone (-61) [54601.372185] PM: suspend exit [54601.433543] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [54601.433554] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [54601.433557] usb 3-3: SerialNumber: ... [54601.669255] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [54603.908051] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [54605.259923] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [54605.267023] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [54605.329610] wlp0s20f3: authenticated [54605.331950] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [54605.338600] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [54605.344036] wlp0s20f3: associated [54605.402140] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [54605.416805] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [54608.398948] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [56139.533356] lockdown_is_locked_down: 2 callbacks suppressed [56139.601951] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [56141.202733] PM: suspend entry (deep) [56141.206467] Filesystems sync: 0.003 seconds [56141.466538] Freezing user space processes [56141.470528] Freezing user space processes completed (elapsed 0.003 seconds) [56141.470539] OOM killer disabled. [56141.470541] Freezing remaining freezable tasks [56141.472191] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [56141.472311] printk: Suspending console(s) (use no_console_suspend to debug) [56142.058805] ACPI: EC: interrupt blocked [56142.188719] ACPI: PM: Preparing to enter system sleep state S3 [56142.215486] ACPI: EC: event blocked [56142.215488] ACPI: EC: EC stopped [56142.215489] ACPI: PM: Saving platform NVS memory [56142.215752] Disabling non-boot CPUs ... [56142.217900] smpboot: CPU 1 is now offline [56142.223240] smpboot: CPU 2 is now offline [56142.226182] smpboot: CPU 3 is now offline [56142.230258] smpboot: CPU 4 is now offline [56142.233876] smpboot: CPU 5 is now offline [56142.236488] smpboot: CPU 6 is now offline [56142.238971] smpboot: CPU 7 is now offline [56142.246966] ACPI: PM: Low-level resume complete [56142.247059] ACPI: EC: EC started [56142.247060] ACPI: PM: Restoring platform NVS memory [56142.248405] Enabling non-boot CPUs ... [56142.248461] x86: Booting SMP configuration: [56142.248461] smpboot: Booting Node 0 Processor 1 APIC 0x2 [56142.249495] CPU1 is up [56142.249531] smpboot: Booting Node 0 Processor 2 APIC 0x4 [56142.250667] CPU2 is up [56142.250690] smpboot: Booting Node 0 Processor 3 APIC 0x6 [56142.251841] CPU3 is up [56142.251863] smpboot: Booting Node 0 Processor 4 APIC 0x1 [56142.253171] CPU4 is up [56142.253195] smpboot: Booting Node 0 Processor 5 APIC 0x3 [56142.254309] CPU5 is up [56142.254330] smpboot: Booting Node 0 Processor 6 APIC 0x5 [56142.255687] CPU6 is up [56142.255709] smpboot: Booting Node 0 Processor 7 APIC 0x7 [56142.257115] CPU7 is up [56142.267896] ACPI: PM: Waking up from system sleep state S3 [56142.331461] ACPI: EC: interrupt unblocked [56143.525994] ACPI: EC: event unblocked [56143.531305] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [56143.533795] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [56143.533798] usb usb1: root hub lost power or was reset [56143.533800] usb usb2: root hub lost power or was reset [56143.534671] mhi mhi0: Resuming from non M3 state (RESET) [56143.534676] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [56143.534699] mhi-pci-generic 0000:08:00.0: device recovery started [56143.554835] mhi mhi0: Requested to power ON [56143.554849] mhi mhi0: Power on setup success [56143.579094] nvme nvme0: 8/0/0 default/read/poll queues [56143.846845] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [56144.058580] mhi mhi0: Wait for device to enter SBL or Mission mode [56144.084458] OOM killer enabled. [56144.084461] Restarting tasks ... [56144.084405] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [56144.084576] usb 3-3: USB disconnect, device number 22 [56144.085060] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [56144.093997] done. [56144.094044] random: crng reseeded on system resumption [56144.238391] usb 3-3: new full-speed USB device number 23 using xhci_hcd [56144.355458] thermal thermal_zone6: failed to read out thermal zone (-61) [56144.393108] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [56144.393115] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [56144.393117] usb 3-3: SerialNumber: ... [56144.409834] PM: suspend exit [56144.542607] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [56146.810513] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [56148.530797] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [56148.539116] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [56148.603788] wlp0s20f3: authenticated [56148.606366] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [56148.612803] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [56148.618770] wlp0s20f3: associated [56148.683329] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [56148.715124] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [56151.262010] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [57380.979508] lockdown_is_locked_down: 5 callbacks suppressed [57381.041421] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [57381.537682] PM: suspend entry (deep) [57381.541052] Filesystems sync: 0.003 seconds [57381.799299] Freezing user space processes [57381.803018] Freezing user space processes completed (elapsed 0.003 seconds) [57381.803028] OOM killer disabled. [57381.803030] Freezing remaining freezable tasks [57381.804355] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [57381.804473] printk: Suspending console(s) (use no_console_suspend to debug) [57382.387579] ACPI: EC: interrupt blocked [57382.517568] ACPI: PM: Preparing to enter system sleep state S3 [57382.544456] ACPI: EC: event blocked [57382.544458] ACPI: EC: EC stopped [57382.544459] ACPI: PM: Saving platform NVS memory [57382.544735] Disabling non-boot CPUs ... [57382.546891] smpboot: CPU 1 is now offline [57382.550787] smpboot: CPU 2 is now offline [57382.553564] smpboot: CPU 3 is now offline [57382.558489] smpboot: CPU 4 is now offline [57382.561034] smpboot: CPU 5 is now offline [57382.562992] smpboot: CPU 6 is now offline [57382.565270] smpboot: CPU 7 is now offline [57382.572836] ACPI: PM: Low-level resume complete [57382.572930] ACPI: EC: EC started [57382.572931] ACPI: PM: Restoring platform NVS memory [57382.574219] Enabling non-boot CPUs ... [57382.574269] x86: Booting SMP configuration: [57382.574269] smpboot: Booting Node 0 Processor 1 APIC 0x2 [57382.575277] CPU1 is up [57382.575309] smpboot: Booting Node 0 Processor 2 APIC 0x4 [57382.576442] CPU2 is up [57382.576465] smpboot: Booting Node 0 Processor 3 APIC 0x6 [57382.577626] CPU3 is up [57382.577649] smpboot: Booting Node 0 Processor 4 APIC 0x1 [57382.578880] CPU4 is up [57382.578906] smpboot: Booting Node 0 Processor 5 APIC 0x3 [57382.579947] CPU5 is up [57382.579969] smpboot: Booting Node 0 Processor 6 APIC 0x5 [57382.581208] CPU6 is up [57382.581229] smpboot: Booting Node 0 Processor 7 APIC 0x7 [57382.582666] CPU7 is up [57382.593329] ACPI: PM: Waking up from system sleep state S3 [57382.641592] ACPI: EC: interrupt unblocked [57383.871054] ACPI: EC: event unblocked [57383.875056] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [57383.879691] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [57383.879701] usb usb1: root hub lost power or was reset [57383.879705] usb usb2: root hub lost power or was reset [57383.880169] mhi mhi0: Resuming from non M3 state (RESET) [57383.880174] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [57383.880183] mhi-pci-generic 0000:08:00.0: device recovery started [57383.903974] mhi mhi0: Requested to power ON [57383.903987] mhi mhi0: Power on setup success [57383.926291] nvme nvme0: 8/0/0 default/read/poll queues [57384.191865] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [57384.371544] mhi mhi0: Wait for device to enter SBL or Mission mode [57384.389779] OOM killer enabled. [57384.389783] Restarting tasks ... [57384.389753] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [57384.390119] usb 3-3: USB disconnect, device number 23 [57384.390919] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [57384.418478] done. [57384.418516] random: crng reseeded on system resumption [57384.519387] usb 3-3: new full-speed USB device number 24 using xhci_hcd [57384.668621] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [57384.668629] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [57384.668631] usb 3-3: SerialNumber: ... [57384.883791] thermal thermal_zone6: failed to read out thermal zone (-61) [57384.923767] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [57385.037257] PM: suspend exit [57387.127381] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [57388.964561] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [57388.967649] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [57389.017615] wlp0s20f3: authenticated [57389.023471] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [57389.032660] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [57389.037990] wlp0s20f3: associated [57389.096095] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [57389.120231] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [57391.650582] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [57677.108349] lockdown_is_locked_down: 3 callbacks suppressed [57677.189091] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [57677.738587] PM: suspend entry (deep) [57677.743180] Filesystems sync: 0.004 seconds [57678.000743] Freezing user space processes [57678.004549] Freezing user space processes completed (elapsed 0.003 seconds) [57678.004558] OOM killer disabled. [57678.004561] Freezing remaining freezable tasks [57678.006295] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [57678.006419] printk: Suspending console(s) (use no_console_suspend to debug) [57678.588564] ACPI: EC: interrupt blocked [57678.710482] ACPI: PM: Preparing to enter system sleep state S3 [57678.737444] ACPI: EC: event blocked [57678.737446] ACPI: EC: EC stopped [57678.737447] ACPI: PM: Saving platform NVS memory [57678.737721] Disabling non-boot CPUs ... [57678.739675] smpboot: CPU 1 is now offline [57678.742547] smpboot: CPU 2 is now offline [57678.745938] smpboot: CPU 3 is now offline [57678.751666] smpboot: CPU 4 is now offline [57678.753985] smpboot: CPU 5 is now offline [57678.755974] smpboot: CPU 6 is now offline [57678.758268] smpboot: CPU 7 is now offline [57678.765766] ACPI: PM: Low-level resume complete [57678.765871] ACPI: EC: EC started [57678.765872] ACPI: PM: Restoring platform NVS memory [57678.767175] Enabling non-boot CPUs ... [57678.767240] x86: Booting SMP configuration: [57678.767240] smpboot: Booting Node 0 Processor 1 APIC 0x2 [57678.768235] CPU1 is up [57678.768268] smpboot: Booting Node 0 Processor 2 APIC 0x4 [57678.769397] CPU2 is up [57678.769418] smpboot: Booting Node 0 Processor 3 APIC 0x6 [57678.770567] CPU3 is up [57678.770587] smpboot: Booting Node 0 Processor 4 APIC 0x1 [57678.771842] CPU4 is up [57678.771867] smpboot: Booting Node 0 Processor 5 APIC 0x3 [57678.773242] CPU5 is up [57678.773264] smpboot: Booting Node 0 Processor 6 APIC 0x5 [57678.774580] CPU6 is up [57678.774600] smpboot: Booting Node 0 Processor 7 APIC 0x7 [57678.776061] CPU7 is up [57678.786628] ACPI: PM: Waking up from system sleep state S3 [57678.834042] ACPI: EC: interrupt unblocked [57680.063929] ACPI: EC: event unblocked [57680.068237] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [57680.074190] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [57680.074198] usb usb1: root hub lost power or was reset [57680.074201] usb usb2: root hub lost power or was reset [57680.074508] mhi mhi0: Resuming from non M3 state (RESET) [57680.074514] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [57680.074525] mhi-pci-generic 0000:08:00.0: device recovery started [57680.088661] mhi mhi0: Requested to power ON [57680.088673] mhi mhi0: Power on setup success [57680.122648] nvme nvme0: 8/0/0 default/read/poll queues [57680.384664] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [57680.586352] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [57680.586664] OOM killer enabled. [57680.586668] Restarting tasks ... [57680.587405] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [57680.587563] usb 3-3: USB disconnect, device number 24 [57680.596108] mhi mhi0: Wait for device to enter SBL or Mission mode [57680.612949] done. [57680.612988] random: crng reseeded on system resumption [57680.716299] usb 3-3: new full-speed USB device number 25 using xhci_hcd [57680.720235] thermal thermal_zone6: failed to read out thermal zone (-61) [57680.765712] PM: suspend exit [57680.873459] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [57680.873467] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [57680.873469] usb 3-3: SerialNumber: ... [57681.110990] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [57683.316410] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [57684.692499] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [57684.695454] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [57684.761408] wlp0s20f3: authenticated [57684.764264] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [57684.771779] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [57684.777920] wlp0s20f3: associated [57684.845008] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [57684.852009] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [57688.088158] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [58298.272770] lockdown_is_locked_down: 3 callbacks suppressed [58298.330492] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [58298.898204] PM: suspend entry (deep) [58298.900957] Filesystems sync: 0.002 seconds [58299.160711] Freezing user space processes [58299.164613] Freezing user space processes completed (elapsed 0.003 seconds) [58299.164621] OOM killer disabled. [58299.164624] Freezing remaining freezable tasks [58299.166340] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [58299.166466] printk: Suspending console(s) (use no_console_suspend to debug) [58299.748890] ACPI: EC: interrupt blocked [58299.886659] ACPI: PM: Preparing to enter system sleep state S3 [58299.913178] ACPI: EC: event blocked [58299.913181] ACPI: EC: EC stopped [58299.913182] ACPI: PM: Saving platform NVS memory [58299.913414] Disabling non-boot CPUs ... [58299.915522] smpboot: CPU 1 is now offline [58299.918242] smpboot: CPU 2 is now offline [58299.921108] smpboot: CPU 3 is now offline [58299.924236] smpboot: CPU 4 is now offline [58299.927807] smpboot: CPU 5 is now offline [58299.930554] smpboot: CPU 6 is now offline [58299.933167] smpboot: CPU 7 is now offline [58299.940629] ACPI: PM: Low-level resume complete [58299.940902] ACPI: EC: EC started [58299.940902] ACPI: PM: Restoring platform NVS memory [58299.942203] Enabling non-boot CPUs ... [58299.942242] x86: Booting SMP configuration: [58299.942243] smpboot: Booting Node 0 Processor 1 APIC 0x2 [58299.943271] CPU1 is up [58299.943302] smpboot: Booting Node 0 Processor 2 APIC 0x4 [58299.944410] CPU2 is up [58299.944430] smpboot: Booting Node 0 Processor 3 APIC 0x6 [58299.945570] CPU3 is up [58299.945593] smpboot: Booting Node 0 Processor 4 APIC 0x1 [58299.946849] CPU4 is up [58299.946875] smpboot: Booting Node 0 Processor 5 APIC 0x3 [58299.947922] CPU5 is up [58299.947942] smpboot: Booting Node 0 Processor 6 APIC 0x5 [58299.949203] CPU6 is up [58299.949225] smpboot: Booting Node 0 Processor 7 APIC 0x7 [58299.950676] CPU7 is up [58299.961287] ACPI: PM: Waking up from system sleep state S3 [58300.007394] ACPI: EC: interrupt unblocked [58301.216120] ACPI: EC: event unblocked [58301.220384] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [58301.225870] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [58301.225879] usb usb1: root hub lost power or was reset [58301.225883] usb usb2: root hub lost power or was reset [58301.226605] mhi mhi0: Resuming from non M3 state (RESET) [58301.226611] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [58301.226631] mhi-pci-generic 0000:08:00.0: device recovery started [58301.241064] mhi mhi0: Requested to power ON [58301.241077] mhi mhi0: Power on setup success [58301.272395] nvme nvme0: 8/0/0 default/read/poll queues [58301.537075] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [58301.744824] mhi mhi0: Wait for device to enter SBL or Mission mode [58301.754853] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [58301.755164] OOM killer enabled. [58301.755172] Restarting tasks ... [58301.755307] usb 3-3: USB disconnect, device number 25 [58301.755586] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [58301.769527] done. [58301.769564] random: crng reseeded on system resumption [58301.884647] usb 3-3: new full-speed USB device number 26 using xhci_hcd [58301.956664] thermal thermal_zone6: failed to read out thermal zone (-61) [58302.004684] PM: suspend exit [58302.037689] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [58302.037696] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [58302.037698] usb 3-3: SerialNumber: ... [58302.295288] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [58304.628750] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [58305.923704] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [58305.926511] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [58305.974441] wlp0s20f3: authenticated [58305.980748] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [58305.985038] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [58305.990663] wlp0s20f3: associated [58306.053393] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [58306.075361] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [58309.034247] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [59713.491380] loop48: detected capacity change from 0 to 621448 [59714.080161] loop49: detected capacity change from 0 to 360184 [59948.477750] lockdown_is_locked_down: 2 callbacks suppressed [59948.562924] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [59949.091962] PM: suspend entry (deep) [59949.095035] Filesystems sync: 0.003 seconds [59949.354388] Freezing user space processes [59949.358065] Freezing user space processes completed (elapsed 0.003 seconds) [59949.358074] OOM killer disabled. [59949.358077] Freezing remaining freezable tasks [59949.359213] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [59949.359338] printk: Suspending console(s) (use no_console_suspend to debug) [59949.940143] ACPI: EC: interrupt blocked [59950.068412] ACPI: PM: Preparing to enter system sleep state S3 [59950.095079] ACPI: EC: event blocked [59950.095082] ACPI: EC: EC stopped [59950.095083] ACPI: PM: Saving platform NVS memory [59950.095321] Disabling non-boot CPUs ... [59950.098970] smpboot: CPU 1 is now offline [59950.101638] smpboot: CPU 2 is now offline [59950.104091] smpboot: CPU 3 is now offline [59950.107604] smpboot: CPU 4 is now offline [59950.110843] smpboot: CPU 5 is now offline [59950.114692] smpboot: CPU 6 is now offline [59950.117335] smpboot: CPU 7 is now offline [59950.124651] ACPI: PM: Low-level resume complete [59950.124923] ACPI: EC: EC started [59950.124923] ACPI: PM: Restoring platform NVS memory [59950.126653] Enabling non-boot CPUs ... [59950.126720] x86: Booting SMP configuration: [59950.126720] smpboot: Booting Node 0 Processor 1 APIC 0x2 [59950.127857] CPU1 is up [59950.127895] smpboot: Booting Node 0 Processor 2 APIC 0x4 [59950.129133] CPU2 is up [59950.129156] smpboot: Booting Node 0 Processor 3 APIC 0x6 [59950.130356] CPU3 is up [59950.130382] smpboot: Booting Node 0 Processor 4 APIC 0x1 [59950.131589] CPU4 is up [59950.131613] smpboot: Booting Node 0 Processor 5 APIC 0x3 [59950.132787] CPU5 is up [59950.132808] smpboot: Booting Node 0 Processor 6 APIC 0x5 [59950.134139] CPU6 is up [59950.134158] smpboot: Booting Node 0 Processor 7 APIC 0x7 [59950.135652] CPU7 is up [59950.146500] ACPI: PM: Waking up from system sleep state S3 [59950.202746] ACPI: EC: interrupt unblocked [59951.402162] ACPI: EC: event unblocked [59951.406895] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [59951.411770] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [59951.411777] usb usb1: root hub lost power or was reset [59951.411780] usb usb2: root hub lost power or was reset [59951.412433] mhi mhi0: Resuming from non M3 state (RESET) [59951.412439] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [59951.412454] mhi-pci-generic 0000:08:00.0: device recovery started [59951.439308] mhi mhi0: Requested to power ON [59951.439322] mhi mhi0: Power on setup success [59951.457662] nvme nvme0: 8/0/0 default/read/poll queues [59951.723115] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [59951.887030] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [59951.887242] OOM killer enabled. [59951.887246] Restarting tasks ... [59951.887358] usb 3-3: USB disconnect, device number 26 [59951.888535] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [59951.902845] done. [59951.902882] random: crng reseeded on system resumption [59951.942705] mhi mhi0: Wait for device to enter SBL or Mission mode [59952.026634] usb 3-3: new full-speed USB device number 27 using xhci_hcd [59952.030447] thermal thermal_zone6: failed to read out thermal zone (-61) [59952.073476] PM: suspend exit [59952.179706] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [59952.179717] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [59952.179720] usb 3-3: SerialNumber: ... [59952.416827] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [59954.814562] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [59956.068995] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [59956.077593] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [59956.141292] wlp0s20f3: authenticated [59956.146292] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [59956.156216] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [59956.161836] wlp0s20f3: associated [59956.286999] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [59956.287283] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [59959.073979] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [60297.009573] lockdown_is_locked_down: 3 callbacks suppressed [60297.073793] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [60297.626134] PM: suspend entry (deep) [60297.628754] Filesystems sync: 0.002 seconds [60297.885961] Freezing user space processes [60297.889236] Freezing user space processes completed (elapsed 0.003 seconds) [60297.889245] OOM killer disabled. [60297.889247] Freezing remaining freezable tasks [60297.890709] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [60297.890821] printk: Suspending console(s) (use no_console_suspend to debug) [60298.470394] ACPI: EC: interrupt blocked [60298.599974] ACPI: PM: Preparing to enter system sleep state S3 [60298.626909] ACPI: EC: event blocked [60298.626912] ACPI: EC: EC stopped [60298.626913] ACPI: PM: Saving platform NVS memory [60298.627210] Disabling non-boot CPUs ... [60298.629420] smpboot: CPU 1 is now offline [60298.635686] smpboot: CPU 2 is now offline [60298.638959] smpboot: CPU 3 is now offline [60298.642353] smpboot: CPU 4 is now offline [60298.646025] smpboot: CPU 5 is now offline [60298.648857] smpboot: CPU 6 is now offline [60298.651431] smpboot: CPU 7 is now offline [60298.658748] ACPI: PM: Low-level resume complete [60298.659020] ACPI: EC: EC started [60298.659021] ACPI: PM: Restoring platform NVS memory [60298.661227] Enabling non-boot CPUs ... [60298.661262] x86: Booting SMP configuration: [60298.661263] smpboot: Booting Node 0 Processor 1 APIC 0x2 [60298.662328] CPU1 is up [60298.662356] smpboot: Booting Node 0 Processor 2 APIC 0x4 [60298.663575] CPU2 is up [60298.663598] smpboot: Booting Node 0 Processor 3 APIC 0x6 [60298.664811] CPU3 is up [60298.664831] smpboot: Booting Node 0 Processor 4 APIC 0x1 [60298.666149] CPU4 is up [60298.666176] smpboot: Booting Node 0 Processor 5 APIC 0x3 [60298.667477] CPU5 is up [60298.667499] smpboot: Booting Node 0 Processor 6 APIC 0x5 [60298.668882] CPU6 is up [60298.668903] smpboot: Booting Node 0 Processor 7 APIC 0x7 [60298.670359] CPU7 is up [60298.681579] ACPI: PM: Waking up from system sleep state S3 [60298.746201] ACPI: EC: interrupt unblocked [60299.953704] ACPI: EC: event unblocked [60299.954137] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [60299.962083] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [60299.962092] usb usb1: root hub lost power or was reset [60299.962095] usb usb2: root hub lost power or was reset [60299.962896] mhi mhi0: Resuming from non M3 state (RESET) [60299.962901] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [60299.962912] mhi-pci-generic 0000:08:00.0: device recovery started [60299.986799] mhi mhi0: Requested to power ON [60299.986810] mhi mhi0: Power on setup success [60300.008169] nvme nvme0: 8/0/0 default/read/poll queues [60300.274852] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [60300.490440] mhi mhi0: Wait for device to enter SBL or Mission mode [60300.500401] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [60300.500632] OOM killer enabled. [60300.500634] Restarting tasks ... [60300.501123] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [60300.515171] done. [60300.515214] random: crng reseeded on system resumption [60300.527668] usb 3-3: USB disconnect, device number 27 [60300.699352] thermal thermal_zone6: failed to read out thermal zone (-61) [60300.751154] PM: suspend exit [60300.802233] usb 3-3: new full-speed USB device number 28 using xhci_hcd [60300.951602] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [60300.951612] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [60300.951615] usb 3-3: SerialNumber: ... [60301.032167] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [60303.206025] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [60304.731692] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [60304.734477] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [60304.787726] wlp0s20f3: authenticated [60304.793858] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [60304.803171] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [60304.808006] wlp0s20f3: associated [60304.894410] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [60304.894466] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [60307.795756] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [64642.989207] lockdown_is_locked_down: 3 callbacks suppressed [64643.035402] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [64643.446023] PM: suspend entry (deep) [64643.449851] Filesystems sync: 0.003 seconds [64643.577044] Freezing user space processes [64643.580389] Freezing user space processes completed (elapsed 0.003 seconds) [64643.580397] OOM killer disabled. [64643.580399] Freezing remaining freezable tasks [64643.581810] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [64643.581906] printk: Suspending console(s) (use no_console_suspend to debug) [64644.054663] ACPI: EC: interrupt blocked [64644.195134] ACPI: PM: Preparing to enter system sleep state S3 [64644.221976] ACPI: EC: event blocked [64644.221979] ACPI: EC: EC stopped [64644.221980] ACPI: PM: Saving platform NVS memory [64644.222277] Disabling non-boot CPUs ... [64644.226500] smpboot: CPU 1 is now offline [64644.228904] smpboot: CPU 2 is now offline [64644.230950] smpboot: CPU 3 is now offline [64644.233521] smpboot: CPU 4 is now offline [64644.235517] smpboot: CPU 5 is now offline [64644.237662] smpboot: CPU 6 is now offline [64644.239335] smpboot: CPU 7 is now offline [64644.246085] ACPI: PM: Low-level resume complete [64644.246163] ACPI: EC: EC started [64644.246163] ACPI: PM: Restoring platform NVS memory [64644.247466] Enabling non-boot CPUs ... [64644.247504] x86: Booting SMP configuration: [64644.247505] smpboot: Booting Node 0 Processor 1 APIC 0x2 [64644.248508] CPU1 is up [64644.248539] smpboot: Booting Node 0 Processor 2 APIC 0x4 [64644.249726] CPU2 is up [64644.249749] smpboot: Booting Node 0 Processor 3 APIC 0x6 [64644.250912] CPU3 is up [64644.250932] smpboot: Booting Node 0 Processor 4 APIC 0x1 [64644.252235] CPU4 is up [64644.252259] smpboot: Booting Node 0 Processor 5 APIC 0x3 [64644.253344] CPU5 is up [64644.253369] smpboot: Booting Node 0 Processor 6 APIC 0x5 [64644.254687] CPU6 is up [64644.254706] smpboot: Booting Node 0 Processor 7 APIC 0x7 [64644.256141] CPU7 is up [64644.262710] ACPI: PM: Waking up from system sleep state S3 [64644.307571] ACPI: EC: interrupt unblocked [64645.520171] ACPI: EC: event unblocked [64645.524256] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [64645.527501] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [64645.527503] usb usb1: root hub lost power or was reset [64645.527504] usb usb2: root hub lost power or was reset [64645.527762] mhi mhi0: Resuming from non M3 state (RESET) [64645.527780] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [64645.527783] mhi-pci-generic 0000:08:00.0: device recovery started [64645.553143] mhi mhi0: Requested to power ON [64645.553157] mhi mhi0: Power on setup success [64645.574678] nvme nvme0: 8/0/0 default/read/poll queues [64645.837040] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [64646.042788] OOM killer enabled. [64646.042792] Restarting tasks ... [64646.042979] usb 3-3: USB disconnect, device number 28 [64646.042900] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [64646.043551] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [64646.059652] done. [64646.059678] random: crng reseeded on system resumption [64646.060620] mhi mhi0: Wait for device to enter SBL or Mission mode [64646.172670] usb 3-3: new full-speed USB device number 29 using xhci_hcd [64646.279136] thermal thermal_zone6: failed to read out thermal zone (-61) [64646.321548] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [64646.321553] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [64646.321555] usb 3-3: SerialNumber: ... [64646.322942] PM: suspend exit [64646.534748] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [64648.904651] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [64650.122504] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [64650.130376] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [64650.193271] wlp0s20f3: authenticated [64650.196528] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [64650.205223] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [64650.209758] wlp0s20f3: associated [64650.213038] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [64650.297028] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [64653.692028] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [65859.674882] lockdown_is_locked_down: 3 callbacks suppressed [65859.720128] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [65860.112196] PM: suspend entry (deep) [65860.114247] Filesystems sync: 0.002 seconds [65860.233438] Freezing user space processes [65860.236215] Freezing user space processes completed (elapsed 0.002 seconds) [65860.236220] OOM killer disabled. [65860.236221] Freezing remaining freezable tasks [65860.237398] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [65860.237472] printk: Suspending console(s) (use no_console_suspend to debug) [65860.710572] ACPI: EC: interrupt blocked [65860.828402] ACPI: PM: Preparing to enter system sleep state S3 [65860.855291] ACPI: EC: event blocked [65860.855293] ACPI: EC: EC stopped [65860.855294] ACPI: PM: Saving platform NVS memory [65860.855493] Disabling non-boot CPUs ... [65860.857552] smpboot: CPU 1 is now offline [65860.860230] smpboot: CPU 2 is now offline [65860.863387] smpboot: CPU 3 is now offline [65860.867279] smpboot: CPU 4 is now offline [65860.869348] smpboot: CPU 5 is now offline [65860.870984] smpboot: CPU 6 is now offline [65860.872810] smpboot: CPU 7 is now offline [65860.879583] ACPI: PM: Low-level resume complete [65860.879677] ACPI: EC: EC started [65860.879678] ACPI: PM: Restoring platform NVS memory [65860.881504] Enabling non-boot CPUs ... [65860.881542] x86: Booting SMP configuration: [65860.881543] smpboot: Booting Node 0 Processor 1 APIC 0x2 [65860.882572] CPU1 is up [65860.882600] smpboot: Booting Node 0 Processor 2 APIC 0x4 [65860.883714] CPU2 is up [65860.883735] smpboot: Booting Node 0 Processor 3 APIC 0x6 [65860.884855] CPU3 is up [65860.884875] smpboot: Booting Node 0 Processor 4 APIC 0x1 [65860.886186] CPU4 is up [65860.886212] smpboot: Booting Node 0 Processor 5 APIC 0x3 [65860.887289] CPU5 is up [65860.887314] smpboot: Booting Node 0 Processor 6 APIC 0x5 [65860.888628] CPU6 is up [65860.888662] smpboot: Booting Node 0 Processor 7 APIC 0x7 [65860.890130] CPU7 is up [65860.896817] ACPI: PM: Waking up from system sleep state S3 [65860.942248] ACPI: EC: interrupt unblocked [65862.161317] ACPI: EC: event unblocked [65862.166548] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [65862.168435] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [65862.168437] usb usb1: root hub lost power or was reset [65862.168438] usb usb2: root hub lost power or was reset [65862.168749] mhi mhi0: Resuming from non M3 state (RESET) [65862.168751] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [65862.168755] mhi-pci-generic 0000:08:00.0: device recovery started [65862.190382] mhi mhi0: Requested to power ON [65862.190395] mhi mhi0: Power on setup success [65862.217168] nvme nvme0: 8/0/0 default/read/poll queues [65862.482402] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [65862.655877] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [65862.656102] OOM killer enabled. [65862.656105] Restarting tasks ... [65862.656552] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [65862.665942] usb 3-3: USB disconnect, device number 29 [65862.666642] done. [65862.666660] random: crng reseeded on system resumption [65862.697924] mhi mhi0: Wait for device to enter SBL or Mission mode [65862.731800] thermal thermal_zone6: failed to read out thermal zone (-61) [65862.784017] PM: suspend exit [65862.833868] usb 3-3: new full-speed USB device number 30 using xhci_hcd [65862.983839] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [65862.983852] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [65862.983857] usb 3-3: SerialNumber: ... [65863.176401] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [65865.637840] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [65866.581454] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [65866.584152] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [65866.634301] wlp0s20f3: authenticated [65866.637904] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [65866.642413] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [65866.648889] wlp0s20f3: associated [65866.706402] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [65866.713115] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [65870.110137] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [66796.265564] usb 3-5: new high-speed USB device number 31 using xhci_hcd [66796.491509] usb 3-5: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [66796.491521] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [66796.491526] usb 3-5: Product: Pixel 3a [66796.491529] usb 3-5: Manufacturer: Google [66796.491531] usb 3-5: SerialNumber: ... [68335.874996] usb 3-5: USB disconnect, device number 31 [69128.135183] usb 3-5: new high-speed USB device number 32 using xhci_hcd [69128.352826] usb 3-5: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [69128.352840] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [69128.352844] usb 3-5: Product: Pixel 3a [69128.352848] usb 3-5: Manufacturer: Google [69128.352851] usb 3-5: SerialNumber: ... [70775.710517] loop2: detected capacity change from 0 to 83672 [70781.817800] loop38: detected capacity change from 0 to 8 [72739.471370] usb 3-5: USB disconnect, device number 32 [72940.036353] lockdown_is_locked_down: 3 callbacks suppressed [72940.069484] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [72940.510410] PM: suspend entry (deep) [72940.512508] Filesystems sync: 0.002 seconds [72940.630692] Freezing user space processes [72940.633586] Freezing user space processes completed (elapsed 0.002 seconds) [72940.633594] OOM killer disabled. [72940.633597] Freezing remaining freezable tasks [72940.634890] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [72940.634992] printk: Suspending console(s) (use no_console_suspend to debug) [72941.154913] ACPI: EC: interrupt blocked [72941.269098] ACPI: PM: Preparing to enter system sleep state S3 [72941.295815] ACPI: EC: event blocked [72941.295818] ACPI: EC: EC stopped [72941.295819] ACPI: PM: Saving platform NVS memory [72941.296071] Disabling non-boot CPUs ... [72941.298286] smpboot: CPU 1 is now offline [72941.301133] smpboot: CPU 2 is now offline [72941.303636] smpboot: CPU 3 is now offline [72941.306379] smpboot: CPU 4 is now offline [72941.309220] smpboot: CPU 5 is now offline [72941.310927] smpboot: CPU 6 is now offline [72941.312964] smpboot: CPU 7 is now offline [72941.319765] ACPI: PM: Low-level resume complete [72941.319846] ACPI: EC: EC started [72941.319846] ACPI: PM: Restoring platform NVS memory [72941.321164] Enabling non-boot CPUs ... [72941.321217] x86: Booting SMP configuration: [72941.321218] smpboot: Booting Node 0 Processor 1 APIC 0x2 [72941.322250] CPU1 is up [72941.322289] smpboot: Booting Node 0 Processor 2 APIC 0x4 [72941.323450] CPU2 is up [72941.323474] smpboot: Booting Node 0 Processor 3 APIC 0x6 [72941.324631] CPU3 is up [72941.324652] smpboot: Booting Node 0 Processor 4 APIC 0x1 [72941.325973] CPU4 is up [72941.325999] smpboot: Booting Node 0 Processor 5 APIC 0x3 [72941.327116] CPU5 is up [72941.327138] smpboot: Booting Node 0 Processor 6 APIC 0x5 [72941.328492] CPU6 is up [72941.328514] smpboot: Booting Node 0 Processor 7 APIC 0x7 [72941.329946] CPU7 is up [72941.336800] ACPI: PM: Waking up from system sleep state S3 [72941.388767] ACPI: EC: interrupt unblocked [72942.594109] ACPI: EC: event unblocked [72942.596606] mhi mhi0: Resuming from non M3 state (RESET) [72942.596614] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [72942.596644] mhi-pci-generic 0000:08:00.0: device recovery started [72942.599405] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [72942.601441] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [72942.601443] usb usb1: root hub lost power or was reset [72942.601444] usb usb2: root hub lost power or was reset [72942.627144] mhi mhi0: Requested to power ON [72942.627158] mhi mhi0: Power on setup success [72942.648341] nvme nvme0: 8/0/0 default/read/poll queues [72942.915157] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [72943.076097] OOM killer enabled. [72943.076101] Restarting tasks ... [72943.076043] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [72943.076816] usb 3-3: USB disconnect, device number 30 [72943.076738] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [72943.081668] done. [72943.081693] random: crng reseeded on system resumption [72943.104277] thermal thermal_zone6: failed to read out thermal zone (-61) [72943.134676] mhi mhi0: Wait for device to enter SBL or Mission mode [72943.156778] PM: suspend exit [72943.214632] usb 3-3: new full-speed USB device number 33 using xhci_hcd [72943.367722] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [72943.367733] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [72943.367736] usb 3-3: SerialNumber: ... [72943.608731] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [72945.974772] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [72947.157804] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [72947.160531] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [72947.221185] wlp0s20f3: authenticated [72947.222580] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [72947.231112] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=4) [72947.235959] wlp0s20f3: associated [72947.330910] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [72947.330972] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [72950.375246] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [77216.852925] lockdown_is_locked_down: 3 callbacks suppressed [77216.914914] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [77217.336383] PM: suspend entry (deep) [77217.341117] Filesystems sync: 0.004 seconds [77217.601403] Freezing user space processes [77217.604353] Freezing user space processes completed (elapsed 0.002 seconds) [77217.604361] OOM killer disabled. [77217.604363] Freezing remaining freezable tasks [77217.605694] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [77217.605807] printk: Suspending console(s) (use no_console_suspend to debug) [77218.183020] ACPI: EC: interrupt blocked [77218.323985] ACPI: PM: Preparing to enter system sleep state S3 [77218.350757] ACPI: EC: event blocked [77218.350759] ACPI: EC: EC stopped [77218.350761] ACPI: PM: Saving platform NVS memory [77218.351025] Disabling non-boot CPUs ... [77218.352987] smpboot: CPU 1 is now offline [77218.355935] smpboot: CPU 2 is now offline [77218.358950] smpboot: CPU 3 is now offline [77218.365484] smpboot: CPU 4 is now offline [77218.368519] smpboot: CPU 5 is now offline [77218.370655] smpboot: CPU 6 is now offline [77218.373148] smpboot: CPU 7 is now offline [77218.382525] ACPI: PM: Low-level resume complete [77218.382797] ACPI: EC: EC started [77218.382797] ACPI: PM: Restoring platform NVS memory [77218.384525] Enabling non-boot CPUs ... [77218.384593] x86: Booting SMP configuration: [77218.384594] smpboot: Booting Node 0 Processor 1 APIC 0x2 [77218.385721] CPU1 is up [77218.385757] smpboot: Booting Node 0 Processor 2 APIC 0x4 [77218.386972] CPU2 is up [77218.386998] smpboot: Booting Node 0 Processor 3 APIC 0x6 [77218.388203] CPU3 is up [77218.388223] smpboot: Booting Node 0 Processor 4 APIC 0x1 [77218.389550] CPU4 is up [77218.389576] smpboot: Booting Node 0 Processor 5 APIC 0x3 [77218.390960] CPU5 is up [77218.390981] smpboot: Booting Node 0 Processor 6 APIC 0x5 [77218.392448] CPU6 is up [77218.392468] smpboot: Booting Node 0 Processor 7 APIC 0x7 [77218.393908] CPU7 is up [77218.404525] ACPI: PM: Waking up from system sleep state S3 [77218.450386] ACPI: EC: interrupt unblocked [77219.653723] ACPI: EC: event unblocked [77219.659030] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [77219.661544] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [77219.661551] usb usb1: root hub lost power or was reset [77219.661554] usb usb2: root hub lost power or was reset [77219.662243] mhi mhi0: Resuming from non M3 state (RESET) [77219.662248] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [77219.662257] mhi-pci-generic 0000:08:00.0: device recovery started [77219.690678] mhi mhi0: Requested to power ON [77219.690689] mhi mhi0: Power on setup success [77219.708737] nvme nvme0: 8/0/0 default/read/poll queues [77219.974763] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [77220.134951] OOM killer enabled. [77220.134954] Restarting tasks ... [77220.134915] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [77220.135779] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [77220.148417] done. [77220.148456] random: crng reseeded on system resumption [77220.162495] usb 3-3: USB disconnect, device number 33 [77220.194306] mhi mhi0: Wait for device to enter SBL or Mission mode [77220.212428] thermal thermal_zone6: failed to read out thermal zone (-61) [77220.278397] PM: suspend exit [77220.290240] usb 3-3: new full-speed USB device number 34 using xhci_hcd [77220.447320] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [77220.447328] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [77220.447330] usb 3-3: SerialNumber: ... [77220.667733] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [77222.906380] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [77224.203878] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [77224.206662] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [77224.266035] wlp0s20f3: authenticated [77224.270222] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [77224.276492] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=3) [77224.280953] wlp0s20f3: associated [77224.342737] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [77224.379801] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [77227.375293] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [77227.514260] usb 3-6: new high-speed USB device number 35 using xhci_hcd [77227.664850] usb 3-6: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.60 [77227.664866] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [77227.664871] usb 3-6: Product: USB2.1 Hub [77227.664876] usb 3-6: Manufacturer: GenesysLogic [77227.667038] hub 3-6:1.0: USB hub found [77227.667306] hub 3-6:1.0: 2 ports detected [77227.978219] usb 3-6.1: new high-speed USB device number 36 using xhci_hcd [77228.108581] usb 3-6.1: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.71 [77228.108590] usb 3-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [77228.108593] usb 3-6.1: Product: USB2.1 Hub [77228.108595] usb 3-6.1: Manufacturer: GenesysLogic [77228.109602] hub 3-6.1:1.0: USB hub found [77228.109849] hub 3-6.1:1.0: 4 ports detected [77694.172004] usb 3-7: new low-speed USB device number 37 using xhci_hcd [77694.323641] usb 3-7: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=63.00 [77694.323654] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [77694.323658] usb 3-7: Product: USB Optical Mouse [77694.323661] usb 3-7: Manufacturer: Logitech [77694.327144] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/0003:046D:C05A.0006/input/input33 [77694.327364] hid-generic 0003:046D:C05A.0006: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-7/input0 [78385.329811] usb usb3-port1: connect-debounce failed [78504.436524] usb 3-1: new full-speed USB device number 38 using xhci_hcd [78504.692490] usb 3-1: new high-speed USB device number 39 using xhci_hcd [78504.845060] usb 3-1: device descriptor read/all, error -71 [78504.845159] usb usb3-port1: attempt power cycle [78505.672516] usb 3-1: new full-speed USB device number 40 using xhci_hcd [78505.693407] usb 3-1: device descriptor read/8, error -71 [78505.821271] usb 3-1: device descriptor read/8, error -71 [78506.056507] usb 3-1: new high-speed USB device number 41 using xhci_hcd [78506.080050] usb 3-1: unable to read config index 0 descriptor/start: -71 [78506.080064] usb 3-1: can't read configurations, error -71 [78506.080161] usb usb3-port1: unable to enumerate USB device [78513.440436] usb 3-1: new full-speed USB device number 43 using xhci_hcd [78513.568469] usb 3-1: device descriptor read/64, error -71 [78513.932424] usb 3-1: new high-speed USB device number 44 using xhci_hcd [78514.336550] usb usb3-port1: attempt power cycle [78514.956431] usb 3-1: new full-speed USB device number 45 using xhci_hcd [78514.956661] usb 3-1: Device not responding to setup address. [78515.164632] usb 3-1: Device not responding to setup address. [78515.372401] usb 3-1: device not accepting address 45, error -71 [78515.500399] usb 3-1: new full-speed USB device number 46 using xhci_hcd [78515.500635] usb 3-1: Device not responding to setup address. [78515.729741] usb 3-1: device descriptor read/8, error -71 [78515.856703] usb 3-1: device descriptor read/8, error -71 [78515.964507] usb usb3-port1: unable to enumerate USB device [78516.512427] usb 3-1: new full-speed USB device number 47 using xhci_hcd [78516.768349] usb 3-1: new high-speed USB device number 48 using xhci_hcd [78516.921009] usb 3-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [78516.921024] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [78516.921029] usb 3-1: Product: Pixel 3a [78516.921033] usb 3-1: Manufacturer: Google [78516.921036] usb 3-1: SerialNumber: ... [78517.043242] usb 3-1: USB disconnect, device number 48 [78517.348395] usb 3-1: new high-speed USB device number 49 using xhci_hcd [78517.499209] usb 3-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [78517.499216] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [78517.499218] usb 3-1: Product: Pixel 3a [78517.499220] usb 3-1: Manufacturer: Google [78517.499221] usb 3-1: SerialNumber: ... [78518.358725] usb 3-1: USB disconnect, device number 49 [78518.672382] usb 3-1: new full-speed USB device number 50 using xhci_hcd [78518.928436] usb 3-1: new high-speed USB device number 51 using xhci_hcd [78519.079161] usb 3-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [78519.079176] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [78519.079181] usb 3-1: Manufacturer: Google [78519.082230] usb 3-1: can't set config #1, error -71 [78519.082365] usb 3-1: USB disconnect, device number 51 [78519.388362] usb 3-1: new high-speed USB device number 52 using xhci_hcd [78519.538597] usb 3-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [78519.538610] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [78519.538614] usb 3-1: Product: Pixel 3a [78519.538617] usb 3-1: Manufacturer: Google [78519.538620] usb 3-1: SerialNumber: ... [78523.933918] usb 3-1: USB disconnect, device number 52 [78524.240326] usb 3-1: new high-speed USB device number 53 using xhci_hcd [78524.393978] usb 3-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [78524.393992] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [78524.393996] usb 3-1: Product: Pixel 3a [78524.394000] usb 3-1: Manufacturer: Google [78524.394003] usb 3-1: SerialNumber: ... [78524.769264] usb 3-1: USB disconnect, device number 53 [78525.076258] usb 3-1: new full-speed USB device number 54 using xhci_hcd [78525.332332] usb 3-1: new high-speed USB device number 55 using xhci_hcd [78525.490207] usb 3-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [78525.490220] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [78525.490225] usb 3-1: Product: Pixel 3a [78525.490228] usb 3-1: Manufacturer: Google [78525.490232] usb 3-1: SerialNumber: ... [78525.768674] usb 3-1: USB disconnect, device number 55 [78526.084177] usb 3-1: new high-speed USB device number 56 using xhci_hcd [78526.234704] usb 3-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [78526.234710] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [78526.234711] usb 3-1: Product: Pixel 3a [78526.234713] usb 3-1: Manufacturer: Google [78526.234714] usb 3-1: SerialNumber: ... [78765.098676] usb 3-1: USB disconnect, device number 56 [78769.053743] usb 3-1: new full-speed USB device number 57 using xhci_hcd [78769.181765] usb 3-1: device descriptor read/64, error -71 [78769.545709] usb 3-1: new high-speed USB device number 58 using xhci_hcd [78769.696546] usb 3-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [78769.696560] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [78769.696565] usb 3-1: Product: Pixel 3a [78769.696569] usb 3-1: Manufacturer: Google [78769.696572] usb 3-1: SerialNumber: ... [78770.374659] usb 3-1: USB disconnect, device number 58 [78770.681584] usb 3-1: new high-speed USB device number 59 using xhci_hcd [78770.833746] usb 3-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [78770.833761] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [78770.833765] usb 3-1: Product: Pixel 3a [78770.833769] usb 3-1: Manufacturer: Google [78770.833773] usb 3-1: SerialNumber: ... [78771.786739] usb 3-1: USB disconnect, device number 59 [78772.097708] usb 3-1: new high-speed USB device number 60 using xhci_hcd [78772.229785] usb 3-1: Device not responding to setup address. [78772.437725] usb 3-1: Device not responding to setup address. [78772.645692] usb 3-1: device not accepting address 60, error -71 [78773.049683] usb 3-1: new high-speed USB device number 61 using xhci_hcd [78773.200110] usb 3-1: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [78773.200125] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [78773.200131] usb 3-1: Product: Pixel 3a [78773.200135] usb 3-1: Manufacturer: Google [78773.200138] usb 3-1: SerialNumber: ... [78782.192995] usb 3-1: USB disconnect, device number 61 [78783.549619] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [78783.677571] usb 3-1: new full-speed USB device number 63 using xhci_hcd [78785.869546] usb 3-1: new full-speed USB device number 64 using xhci_hcd [78785.997576] usb 3-1: device descriptor read/64, error -71 [78786.233587] usb 3-1: device descriptor read/64, error -71 [78786.473440] usb 3-1: new full-speed USB device number 65 using xhci_hcd [78786.601463] usb 3-1: device descriptor read/64, error -71 [78786.837584] usb 3-1: device descriptor read/64, error -71 [78786.945639] usb usb3-port1: attempt power cycle [78787.357500] usb 3-1: new full-speed USB device number 66 using xhci_hcd [78787.357714] usb 3-1: Device not responding to setup address. [78787.565719] usb 3-1: Device not responding to setup address. [78787.773529] usb 3-1: device not accepting address 66, error -71 [78787.901525] usb 3-1: new full-speed USB device number 67 using xhci_hcd [78787.901728] usb 3-1: Device not responding to setup address. [78788.109719] usb 3-1: Device not responding to setup address. [78788.317489] usb 3-1: device not accepting address 67, error -71 [78788.317591] usb usb3-port1: unable to enumerate USB device [79698.201113] usb 3-1: new full-speed USB device number 68 using xhci_hcd [79698.329281] usb 3-1: device descriptor read/64, error -71 [80639.331816] usb usb3-port1: Cannot enable. Maybe the USB cable is bad? [80639.459899] usb 3-1: new high-speed USB device number 70 using xhci_hcd [80639.863866] usb usb3-port1: attempt power cycle [80669.890344] usb 3-1: new full-speed USB device number 72 using xhci_hcd [80670.018379] usb 3-1: device descriptor read/64, error -71 [80670.258239] usb 3-1: device descriptor read/64, error -71 [80670.494314] usb 3-1: new full-speed USB device number 73 using xhci_hcd [80670.622354] usb 3-1: device descriptor read/64, error -71 [80670.858208] usb 3-1: device descriptor read/64, error -71 [80670.966382] usb usb3-port1: attempt power cycle [80671.378147] usb 3-1: new full-speed USB device number 74 using xhci_hcd [80671.378339] usb 3-1: Device not responding to setup address. [80671.586329] usb 3-1: Device not responding to setup address. [80671.794109] usb 3-1: device not accepting address 74, error -71 [80671.926129] usb 3-1: new full-speed USB device number 75 using xhci_hcd [80671.926339] usb 3-1: Device not responding to setup address. [80672.134287] usb 3-1: Device not responding to setup address. [80672.342184] usb 3-1: device not accepting address 75, error -71 [80672.342288] usb usb3-port1: unable to enumerate USB device [88409.309369] usb 3-6: USB disconnect, device number 35 [88409.309383] usb 3-6.1: USB disconnect, device number 36 [96447.036943] wlp0s20f3: authenticate with 4392CBF08C375D29100227C36397C70D [96447.036981] wlp0s20f3: 80 MHz not supported, disabling VHT [96447.042799] wlp0s20f3: send auth to 4392CBF08C375D29100227C36397C70D (try 1/3) [96447.075746] wlp0s20f3: authenticated [96447.081221] wlp0s20f3: associate with 4392CBF08C375D29100227C36397C70D (try 1/3) [96447.090541] wlp0s20f3: RX AssocResp from 4392CBF08C375D29100227C36397C70D (capab=0x1431 status=0 aid=2) [96447.101757] wlp0s20f3: associated [96447.159207] wlp0s20f3: Limiting TX power to 20 (20 - 0) dBm as advertised by 4392CBF08C375D29100227C36397C70D [99810.285144] wlp0s20f3: Connection to AP 4392CBF08C375D29100227C36397C70D lost [99811.934084] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [99811.942309] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [99811.977735] wlp0s20f3: authenticated [99811.978283] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [99811.985480] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=2) [99811.994777] wlp0s20f3: associated [99812.000419] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [109514.061083] loop38: detected capacity change from 0 to 1066760 [112444.499159] lockdown_is_locked_down: 3 callbacks suppressed [112444.567245] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [112445.029567] PM: suspend entry (deep) [112445.032301] Filesystems sync: 0.002 seconds [112445.153119] Freezing user space processes [112445.156143] Freezing user space processes completed (elapsed 0.003 seconds) [112445.156152] OOM killer disabled. [112445.156154] Freezing remaining freezable tasks [112445.157502] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [112445.157620] printk: Suspending console(s) (use no_console_suspend to debug) [112445.741612] ACPI: EC: interrupt blocked [112445.871340] ACPI: PM: Preparing to enter system sleep state S3 [112445.898057] ACPI: EC: event blocked [112445.898059] ACPI: EC: EC stopped [112445.898060] ACPI: PM: Saving platform NVS memory [112445.898284] Disabling non-boot CPUs ... [112445.900376] smpboot: CPU 1 is now offline [112445.905293] smpboot: CPU 2 is now offline [112445.908235] smpboot: CPU 3 is now offline [112445.911623] smpboot: CPU 4 is now offline [112445.914668] smpboot: CPU 5 is now offline [112445.917080] smpboot: CPU 6 is now offline [112445.919935] smpboot: CPU 7 is now offline [112445.927249] ACPI: PM: Low-level resume complete [112445.927521] ACPI: EC: EC started [112445.927522] ACPI: PM: Restoring platform NVS memory [112445.929782] Enabling non-boot CPUs ... [112445.929835] x86: Booting SMP configuration: [112445.929836] smpboot: Booting Node 0 Processor 1 APIC 0x2 [112445.930877] CPU1 is up [112445.930907] smpboot: Booting Node 0 Processor 2 APIC 0x4 [112445.932049] CPU2 is up [112445.932069] smpboot: Booting Node 0 Processor 3 APIC 0x6 [112445.933248] CPU3 is up [112445.933268] smpboot: Booting Node 0 Processor 4 APIC 0x1 [112445.934603] CPU4 is up [112445.934628] smpboot: Booting Node 0 Processor 5 APIC 0x3 [112445.935699] CPU5 is up [112445.935721] smpboot: Booting Node 0 Processor 6 APIC 0x5 [112445.937036] CPU6 is up [112445.937056] smpboot: Booting Node 0 Processor 7 APIC 0x7 [112445.938332] CPU7 is up [112445.949053] ACPI: PM: Waking up from system sleep state S3 [112446.016092] ACPI: EC: interrupt unblocked [112447.221022] ACPI: EC: event unblocked [112447.226360] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [112447.228734] mhi mhi0: Resuming from non M3 state (RESET) [112447.228739] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [112447.228748] mhi-pci-generic 0000:08:00.0: device recovery started [112447.249992] mhi mhi0: Requested to power ON [112447.250003] mhi mhi0: Power on setup success [112447.276730] nvme nvme0: 8/0/0 default/read/poll queues [112447.537932] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [112447.753756] mhi mhi0: Wait for device to enter SBL or Mission mode [112447.767569] OOM killer enabled. [112447.767573] Restarting tasks ... [112447.767521] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [112447.767706] usb 3-3: USB disconnect, device number 34 [112447.768557] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [112447.782890] done. [112447.782928] random: crng reseeded on system resumption [112447.945549] usb 3-3: new full-speed USB device number 76 using xhci_hcd [112447.950026] thermal thermal_zone6: failed to read out thermal zone (-61) [112448.017922] PM: suspend exit [112448.098604] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [112448.098615] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [112448.098618] usb 3-3: SerialNumber: ... [112448.249548] usb 3-6: new high-speed USB device number 77 using xhci_hcd [112448.299423] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [112448.404062] usb 3-6: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.60 [112448.404069] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [112448.404070] usb 3-6: Product: USB2.1 Hub [112448.404071] usb 3-6: Manufacturer: GenesysLogic [112448.405187] hub 3-6:1.0: USB hub found [112448.405411] hub 3-6:1.0: 2 ports detected [112448.721561] usb 3-6.1: new high-speed USB device number 78 using xhci_hcd [112448.847884] usb 3-6.1: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.71 [112448.847890] usb 3-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [112448.847891] usb 3-6.1: Product: USB2.1 Hub [112448.847892] usb 3-6.1: Manufacturer: GenesysLogic [112448.850947] hub 3-6.1:1.0: USB hub found [112448.851187] hub 3-6.1:1.0: 4 ports detected [112450.601546] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [112452.050023] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [112452.058636] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [112452.123759] wlp0s20f3: authenticated [112452.125612] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [112452.134784] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [112452.139751] wlp0s20f3: associated [112452.229741] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [112452.229791] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [112454.922180] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [112456.737679] usb usb2-port3: attempt power cycle [112465.253680] usb usb2-port3: unable to enumerate USB device [148240.353805] loop42: detected capacity change from 0 to 223312 [161188.912247] usb 3-6: USB disconnect, device number 77 [161188.912260] usb 3-6.1: USB disconnect, device number 78 [161197.996247] lockdown_is_locked_down: 2 callbacks suppressed [161198.042224] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [161198.440754] PM: suspend entry (deep) [161198.444336] Filesystems sync: 0.003 seconds [161198.564646] Freezing user space processes [161198.568397] Freezing user space processes completed (elapsed 0.003 seconds) [161198.568406] OOM killer disabled. [161198.568409] Freezing remaining freezable tasks [161198.569986] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [161198.570107] printk: Suspending console(s) (use no_console_suspend to debug) [161199.152438] ACPI: EC: interrupt blocked [161199.274050] ACPI: PM: Preparing to enter system sleep state S3 [161199.300893] ACPI: EC: event blocked [161199.300895] ACPI: EC: EC stopped [161199.300896] ACPI: PM: Saving platform NVS memory [161199.301156] Disabling non-boot CPUs ... [161199.303349] smpboot: CPU 1 is now offline [161199.306662] smpboot: CPU 2 is now offline [161199.310982] smpboot: CPU 3 is now offline [161199.313624] smpboot: CPU 4 is now offline [161199.316797] smpboot: CPU 5 is now offline [161199.319259] smpboot: CPU 6 is now offline [161199.322220] smpboot: CPU 7 is now offline [161199.329747] ACPI: PM: Low-level resume complete [161199.330019] ACPI: EC: EC started [161199.330020] ACPI: PM: Restoring platform NVS memory [161199.332471] Enabling non-boot CPUs ... [161199.332511] x86: Booting SMP configuration: [161199.332511] smpboot: Booting Node 0 Processor 1 APIC 0x2 [161199.333603] CPU1 is up [161199.333634] smpboot: Booting Node 0 Processor 2 APIC 0x4 [161199.334830] CPU2 is up [161199.334851] smpboot: Booting Node 0 Processor 3 APIC 0x6 [161199.336069] CPU3 is up [161199.336089] smpboot: Booting Node 0 Processor 4 APIC 0x1 [161199.337387] CPU4 is up [161199.337413] smpboot: Booting Node 0 Processor 5 APIC 0x3 [161199.338601] CPU5 is up [161199.338623] smpboot: Booting Node 0 Processor 6 APIC 0x5 [161199.339984] CPU6 is up [161199.340004] smpboot: Booting Node 0 Processor 7 APIC 0x7 [161199.341371] CPU7 is up [161199.352085] ACPI: PM: Waking up from system sleep state S3 [161199.403493] ACPI: EC: interrupt unblocked [161200.612124] ACPI: EC: event unblocked [161200.617045] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [161200.621204] mhi mhi0: Resuming from non M3 state (RESET) [161200.621210] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [161200.621219] mhi-pci-generic 0000:08:00.0: device recovery started [161200.636931] mhi mhi0: Requested to power ON [161200.636941] mhi mhi0: Power on setup success [161200.666357] nvme nvme0: 8/0/0 default/read/poll queues [161200.933152] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [161201.094181] OOM killer enabled. [161201.094185] Restarting tasks ... [161201.094125] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [161201.094746] usb 3-3: USB disconnect, device number 76 [161201.094924] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [161201.115459] done. [161201.115495] random: crng reseeded on system resumption [161201.140693] mhi mhi0: Wait for device to enter SBL or Mission mode [161201.232840] usb 3-3: new full-speed USB device number 79 using xhci_hcd [161201.381900] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [161201.381908] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [161201.381911] usb 3-3: SerialNumber: ... [161201.556996] thermal thermal_zone6: failed to read out thermal zone (-61) [161201.630144] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [161201.683361] PM: suspend exit [161203.928551] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [161205.583305] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [161205.586036] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [161205.641035] wlp0s20f3: authenticated [161205.644538] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [161205.651598] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [161205.656658] wlp0s20f3: associated [161205.749114] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [161205.749312] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [161208.640229] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [161213.984488] usb 3-6: new high-speed USB device number 80 using xhci_hcd [161214.143053] usb 3-6: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.60 [161214.143062] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [161214.143064] usb 3-6: Product: USB2.1 Hub [161214.143066] usb 3-6: Manufacturer: GenesysLogic [161214.144513] hub 3-6:1.0: USB hub found [161214.144776] hub 3-6:1.0: 2 ports detected [161214.460458] usb 3-6.1: new high-speed USB device number 81 using xhci_hcd [161214.586747] usb 3-6.1: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.71 [161214.586761] usb 3-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [161214.586763] usb 3-6.1: Product: USB2.1 Hub [161214.586765] usb 3-6.1: Manufacturer: GenesysLogic [161214.587804] hub 3-6.1:1.0: USB hub found [161214.588048] hub 3-6.1:1.0: 4 ports detected [166222.600402] usb 3-6: USB disconnect, device number 80 [166222.600415] usb 3-6.1: USB disconnect, device number 81 [166223.038150] usb 3-7: USB disconnect, device number 37 [166233.257033] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [166233.825873] PM: suspend entry (deep) [166233.828416] Filesystems sync: 0.002 seconds [166234.088869] Freezing user space processes [166234.092891] Freezing user space processes completed (elapsed 0.004 seconds) [166234.092900] OOM killer disabled. [166234.092903] Freezing remaining freezable tasks [166234.094638] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [166234.094758] printk: Suspending console(s) (use no_console_suspend to debug) [166234.708395] ACPI: EC: interrupt blocked [166234.825931] ACPI: PM: Preparing to enter system sleep state S3 [166234.852666] ACPI: EC: event blocked [166234.852668] ACPI: EC: EC stopped [166234.852669] ACPI: PM: Saving platform NVS memory [166234.852930] Disabling non-boot CPUs ... [166234.855123] smpboot: CPU 1 is now offline [166234.858078] smpboot: CPU 2 is now offline [166234.860521] smpboot: CPU 3 is now offline [166234.864364] smpboot: CPU 4 is now offline [166234.868706] smpboot: CPU 5 is now offline [166234.870801] smpboot: CPU 6 is now offline [166234.875052] smpboot: CPU 7 is now offline [166234.882333] ACPI: PM: Low-level resume complete [166234.882441] ACPI: EC: EC started [166234.882441] ACPI: PM: Restoring platform NVS memory [166234.883756] Enabling non-boot CPUs ... [166234.883795] x86: Booting SMP configuration: [166234.883795] smpboot: Booting Node 0 Processor 1 APIC 0x2 [166234.884792] CPU1 is up [166234.884825] smpboot: Booting Node 0 Processor 2 APIC 0x4 [166234.885967] CPU2 is up [166234.885990] smpboot: Booting Node 0 Processor 3 APIC 0x6 [166234.887135] CPU3 is up [166234.887155] smpboot: Booting Node 0 Processor 4 APIC 0x1 [166234.888408] CPU4 is up [166234.888432] smpboot: Booting Node 0 Processor 5 APIC 0x3 [166234.889619] CPU5 is up [166234.889639] smpboot: Booting Node 0 Processor 6 APIC 0x5 [166234.890983] CPU6 is up [166234.891003] smpboot: Booting Node 0 Processor 7 APIC 0x7 [166234.892624] CPU7 is up [166234.903282] ACPI: PM: Waking up from system sleep state S3 [166234.971118] ACPI: EC: interrupt unblocked [166236.179210] ACPI: EC: event unblocked [166236.183110] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [166236.188384] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [166236.188391] usb usb1: root hub lost power or was reset [166236.188394] usb usb2: root hub lost power or was reset [166236.189060] mhi mhi0: Resuming from non M3 state (RESET) [166236.189068] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [166236.189085] mhi-pci-generic 0000:08:00.0: device recovery started [166236.204210] mhi mhi0: Requested to power ON [166236.204222] mhi mhi0: Power on setup success [166236.233725] nvme nvme0: 8/0/0 default/read/poll queues [166236.500282] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [166236.707936] mhi mhi0: Wait for device to enter SBL or Mission mode [166236.725414] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [166236.725644] OOM killer enabled. [166236.725646] Restarting tasks ... [166236.726115] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [166236.741077] usb 3-3: USB disconnect, device number 79 [166236.747877] done. [166236.747913] random: crng reseeded on system resumption [166236.879460] thermal thermal_zone6: failed to read out thermal zone (-61) [166236.920160] PM: suspend exit [166236.995746] usb 3-3: new full-speed USB device number 82 using xhci_hcd [166237.148802] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [166237.148810] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [166237.148812] usb 3-3: SerialNumber: ... [166237.193094] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [166239.655906] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [166240.738017] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [166240.743944] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [166240.807950] wlp0s20f3: authenticated [166240.811928] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [166240.820749] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [166240.826581] wlp0s20f3: associated [166240.928708] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [166240.956534] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [166243.926236] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [168704.505416] usb 3-7: new low-speed USB device number 83 using xhci_hcd [168704.661292] usb 3-7: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00 [168704.661306] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [168704.661310] usb 3-7: Product: Dell MS116 USB Optical Mouse [168704.661313] usb 3-7: Manufacturer: PixArt [168704.664385] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/0003:413C:301A.0007/input/input34 [168704.664568] hid-generic 0003:413C:301A.0007: input,hidraw2: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-7/input0 [177323.214741] lockdown_is_locked_down: 3 callbacks suppressed [182191.427381] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [182191.790138] PM: suspend entry (deep) [182191.792159] Filesystems sync: 0.002 seconds [182191.918339] Freezing user space processes [182191.922298] Freezing user space processes completed (elapsed 0.003 seconds) [182191.922307] OOM killer disabled. [182191.922309] Freezing remaining freezable tasks [182191.924014] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [182191.924114] printk: Suspending console(s) (use no_console_suspend to debug) [182192.458273] ACPI: EC: interrupt blocked [182192.580211] ACPI: PM: Preparing to enter system sleep state S3 [182192.606829] ACPI: EC: event blocked [182192.606830] ACPI: EC: EC stopped [182192.606830] ACPI: PM: Saving platform NVS memory [182192.606978] Disabling non-boot CPUs ... [182192.609154] smpboot: CPU 1 is now offline [182192.611150] smpboot: CPU 2 is now offline [182192.613112] smpboot: CPU 3 is now offline [182192.615056] smpboot: CPU 4 is now offline [182192.616973] smpboot: CPU 5 is now offline [182192.618873] smpboot: CPU 6 is now offline [182192.621053] smpboot: CPU 7 is now offline [182192.627639] ACPI: PM: Low-level resume complete [182192.627941] ACPI: EC: EC started [182192.627942] ACPI: PM: Restoring platform NVS memory [182192.630133] Enabling non-boot CPUs ... [182192.630211] x86: Booting SMP configuration: [182192.630212] smpboot: Booting Node 0 Processor 1 APIC 0x2 [182192.631408] CPU1 is up [182192.631443] smpboot: Booting Node 0 Processor 2 APIC 0x4 [182192.632816] CPU2 is up [182192.632843] smpboot: Booting Node 0 Processor 3 APIC 0x6 [182192.634129] CPU3 is up [182192.634149] smpboot: Booting Node 0 Processor 4 APIC 0x1 [182192.635754] CPU4 is up [182192.635779] smpboot: Booting Node 0 Processor 5 APIC 0x3 [182192.637008] CPU5 is up [182192.637028] smpboot: Booting Node 0 Processor 6 APIC 0x5 [182192.638473] CPU6 is up [182192.638493] smpboot: Booting Node 0 Processor 7 APIC 0x7 [182192.639857] CPU7 is up [182192.646821] ACPI: PM: Waking up from system sleep state S3 [182192.696628] ACPI: EC: interrupt unblocked [182193.934253] ACPI: EC: event unblocked [182193.938119] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [182193.941377] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [182193.941381] usb usb1: root hub lost power or was reset [182193.941383] usb usb2: root hub lost power or was reset [182193.941530] mhi mhi0: Resuming from non M3 state (RESET) [182193.941531] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [182193.941536] mhi-pci-generic 0000:08:00.0: device recovery started [182193.955233] mhi mhi0: Requested to power ON [182193.955246] mhi mhi0: Power on setup success [182193.989315] nvme nvme0: 8/0/0 default/read/poll queues [182194.251319] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [182194.414284] OOM killer enabled. [182194.414288] Restarting tasks ... [182194.414302] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [182194.415367] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [182194.422842] mhi mhi0: Wait for device to enter SBL or Mission mode [182194.423443] done. [182194.423463] random: crng reseeded on system resumption [182194.442851] usb 3-3: USB disconnect, device number 82 [182194.552512] thermal thermal_zone6: failed to read out thermal zone (-61) [182194.570909] usb 3-3: new full-speed USB device number 84 using xhci_hcd [182194.604654] PM: suspend exit [182194.719930] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [182194.719935] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [182194.719936] usb 3-3: SerialNumber: ... [182194.948817] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [182197.250781] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [182198.391995] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [182198.399606] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [182198.459553] wlp0s20f3: authenticated [182198.462748] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [182198.469286] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [182198.474191] wlp0s20f3: associated [182198.485286] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [182198.551514] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [182201.692619] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [204207.016371] lockdown_is_locked_down: 3 callbacks suppressed [204207.067382] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [204207.520969] PM: suspend entry (deep) [204207.523853] Filesystems sync: 0.002 seconds [204207.641430] Freezing user space processes [204207.644967] Freezing user space processes completed (elapsed 0.003 seconds) [204207.644976] OOM killer disabled. [204207.644978] Freezing remaining freezable tasks [204207.646440] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [204207.646542] printk: Suspending console(s) (use no_console_suspend to debug) [204208.082554] ACPI: EC: interrupt blocked [204208.187673] ACPI: PM: Preparing to enter system sleep state S3 [204208.214353] ACPI: EC: event blocked [204208.214354] ACPI: EC: EC stopped [204208.214355] ACPI: PM: Saving platform NVS memory [204208.214502] Disabling non-boot CPUs ... [204208.216136] smpboot: CPU 1 is now offline [204208.218612] smpboot: CPU 2 is now offline [204208.221555] smpboot: CPU 3 is now offline [204208.223586] smpboot: CPU 4 is now offline [204208.225495] smpboot: CPU 5 is now offline [204208.227422] smpboot: CPU 6 is now offline [204208.229222] smpboot: CPU 7 is now offline [204208.236184] ACPI: PM: Low-level resume complete [204208.236455] ACPI: EC: EC started [204208.236456] ACPI: PM: Restoring platform NVS memory [204208.238204] Enabling non-boot CPUs ... [204208.238271] x86: Booting SMP configuration: [204208.238272] smpboot: Booting Node 0 Processor 1 APIC 0x2 [204208.239405] CPU1 is up [204208.239441] smpboot: Booting Node 0 Processor 2 APIC 0x4 [204208.240670] CPU2 is up [204208.240693] smpboot: Booting Node 0 Processor 3 APIC 0x6 [204208.242156] CPU3 is up [204208.242180] smpboot: Booting Node 0 Processor 4 APIC 0x1 [204208.243517] CPU4 is up [204208.243542] smpboot: Booting Node 0 Processor 5 APIC 0x3 [204208.244682] CPU5 is up [204208.244703] smpboot: Booting Node 0 Processor 6 APIC 0x5 [204208.246075] CPU6 is up [204208.246098] smpboot: Booting Node 0 Processor 7 APIC 0x7 [204208.247523] CPU7 is up [204208.254206] ACPI: PM: Waking up from system sleep state S3 [204208.300512] ACPI: EC: interrupt unblocked [204209.541384] ACPI: EC: event unblocked [204209.546438] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [204209.548414] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [204209.548416] usb usb1: root hub lost power or was reset [204209.548418] usb usb2: root hub lost power or was reset [204209.548705] mhi mhi0: Resuming from non M3 state (RESET) [204209.548707] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [204209.548714] mhi-pci-generic 0000:08:00.0: device recovery started [204209.566539] mhi mhi0: Requested to power ON [204209.566553] mhi mhi0: Power on setup success [204209.596574] nvme nvme0: 8/0/0 default/read/poll queues [204209.858375] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [204210.033974] mhi mhi0: Wait for device to enter SBL or Mission mode [204210.556022] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [204212.541136] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [204212.541381] OOM killer enabled. [204212.541383] Restarting tasks ... [204212.541502] usb 3-3: USB disconnect, device number 84 [204212.550123] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [204212.551329] done. [204212.551348] random: crng reseeded on system resumption [204212.596853] thermal thermal_zone6: failed to read out thermal zone (-61) [204212.677791] usb 3-3: new full-speed USB device number 85 using xhci_hcd [204212.761616] PM: suspend exit [204212.838803] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [204212.838812] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [204212.838816] usb 3-3: SerialNumber: ... [204212.985902] usb 3-7: USB disconnect, device number 83 [204213.081780] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [204216.743712] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [204216.748757] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [204216.811484] wlp0s20f3: authenticated [204216.813784] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [204216.821126] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [204216.827978] wlp0s20f3: associated [204216.898842] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [204216.913580] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [204217.301842] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [204440.707421] usb 3-7: new low-speed USB device number 86 using xhci_hcd [204440.859970] usb 3-7: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00 [204440.859986] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [204440.859991] usb 3-7: Product: Dell MS116 USB Optical Mouse [204440.859995] usb 3-7: Manufacturer: PixArt [204440.866642] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/0003:413C:301A.0008/input/input35 [204440.866898] hid-generic 0003:413C:301A.0008: input,hidraw2: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:00:14.0-7/input0 [208173.155818] loop50: detected capacity change from 0 to 236968 [208184.464179] loop51: detected capacity change from 0 to 447264 [210377.161488] wlp0s20f3: Connection to AP 98119FD68CFEDA0B031C4ABF7EC98FB0 lost [210379.102257] wlp0s20f3: authenticate with 4392CBF08C375D29100227C36397C70D [210379.102292] wlp0s20f3: 80 MHz not supported, disabling VHT [210379.106972] wlp0s20f3: send auth to 4392CBF08C375D29100227C36397C70D (try 1/3) [210379.148477] wlp0s20f3: authenticated [210379.153413] wlp0s20f3: associate with 4392CBF08C375D29100227C36397C70D (try 1/3) [210379.162241] wlp0s20f3: RX AssocResp from 4392CBF08C375D29100227C36397C70D (capab=0x1431 status=0 aid=1) [210379.169819] wlp0s20f3: associated [210379.557073] wlp0s20f3: Limiting TX power to 20 (20 - 0) dBm as advertised by 4392CBF08C375D29100227C36397C70D [223425.168334] lockdown_is_locked_down: 4 callbacks suppressed [223425.257441] wlp0s20f3: deauthenticating from 4392CBF08C375D29100227C36397C70D by local choice (Reason: 3=DEAUTH_LEAVING) [223425.923137] PM: suspend entry (deep) [223425.925605] Filesystems sync: 0.002 seconds [223426.046274] Freezing user space processes [223426.050296] Freezing user space processes completed (elapsed 0.004 seconds) [223426.050307] OOM killer disabled. [223426.050309] Freezing remaining freezable tasks [223426.051824] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [223426.051924] printk: Suspending console(s) (use no_console_suspend to debug) [223426.616847] ACPI: EC: interrupt blocked [223426.732878] ACPI: PM: Preparing to enter system sleep state S3 [223426.771707] ACPI: EC: event blocked [223426.771709] ACPI: EC: EC stopped [223426.771710] ACPI: PM: Saving platform NVS memory [223426.771946] Disabling non-boot CPUs ... [223426.773972] smpboot: CPU 1 is now offline [223426.777266] smpboot: CPU 2 is now offline [223426.779450] smpboot: CPU 3 is now offline [223426.782707] smpboot: CPU 4 is now offline [223426.784799] smpboot: CPU 5 is now offline [223426.786732] smpboot: CPU 6 is now offline [223426.788603] smpboot: CPU 7 is now offline [223426.795581] ACPI: PM: Low-level resume complete [223426.795673] ACPI: EC: EC started [223426.795673] ACPI: PM: Restoring platform NVS memory [223426.797020] Enabling non-boot CPUs ... [223426.797075] x86: Booting SMP configuration: [223426.797076] smpboot: Booting Node 0 Processor 1 APIC 0x2 [223426.798147] CPU1 is up [223426.798183] smpboot: Booting Node 0 Processor 2 APIC 0x4 [223426.799297] CPU2 is up [223426.799319] smpboot: Booting Node 0 Processor 3 APIC 0x6 [223426.800474] CPU3 is up [223426.800498] smpboot: Booting Node 0 Processor 4 APIC 0x1 [223426.801868] CPU4 is up [223426.801894] smpboot: Booting Node 0 Processor 5 APIC 0x3 [223426.803030] CPU5 is up [223426.803052] smpboot: Booting Node 0 Processor 6 APIC 0x5 [223426.804431] CPU6 is up [223426.804450] smpboot: Booting Node 0 Processor 7 APIC 0x7 [223426.805925] CPU7 is up [223426.812762] ACPI: PM: Waking up from system sleep state S3 [223426.857699] ACPI: EC: interrupt unblocked [223428.082084] ACPI: EC: event unblocked [223428.085878] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [223428.088523] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [223428.088526] usb usb1: root hub lost power or was reset [223428.088528] usb usb2: root hub lost power or was reset [223428.088752] mhi mhi0: Resuming from non M3 state (RESET) [223428.088766] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [223428.088772] mhi-pci-generic 0000:08:00.0: device recovery started [223428.106816] mhi mhi0: Requested to power ON [223428.106832] mhi mhi0: Power on setup success [223428.135831] nvme nvme0: 8/0/0 default/read/poll queues [223428.398911] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [223428.561849] OOM killer enabled. [223428.561853] Restarting tasks ... [223428.561829] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [223428.562021] usb 3-3: USB disconnect, device number 85 [223428.564093] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [223428.574539] done. [223428.574563] random: crng reseeded on system resumption [223428.610440] mhi mhi0: Wait for device to enter SBL or Mission mode [223428.698373] usb 3-3: new full-speed USB device number 87 using xhci_hcd [223428.792800] thermal thermal_zone6: failed to read out thermal zone (-61) [223428.844928] PM: suspend exit [223428.851439] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [223428.851443] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [223428.851445] usb 3-3: SerialNumber: ... [223429.096262] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [223431.398378] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [223432.552852] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [223432.558611] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [223432.622196] wlp0s20f3: authenticated [223432.630329] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [223432.637063] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [223432.642179] wlp0s20f3: associated [223432.663275] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [223432.739019] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [223436.060032] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [226368.917151] usb 3-5: new high-speed USB device number 88 using xhci_hcd [226369.139828] usb 3-5: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [226369.139841] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [226369.139845] usb 3-5: Product: Pixel 3a [226369.139848] usb 3-5: Manufacturer: Google [226369.139851] usb 3-5: SerialNumber: ... [229169.079862] usb 3-5: USB disconnect, device number 88 [231636.536935] usb 3-5: new high-speed USB device number 89 using xhci_hcd [231636.759527] usb 3-5: New USB device found, idVendor=18d1, idProduct=4ee1, bcdDevice= 4.40 [231636.759541] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [231636.759545] usb 3-5: Product: Pixel 3a [231636.759549] usb 3-5: Manufacturer: Google [231636.759552] usb 3-5: SerialNumber: ... [234371.810129] usb 3-5: USB disconnect, device number 89 [236536.215714] lockdown_is_locked_down: 3 callbacks suppressed [236536.250956] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [236536.652858] PM: suspend entry (deep) [236536.655246] Filesystems sync: 0.002 seconds [236536.777602] Freezing user space processes [236536.781163] Freezing user space processes completed (elapsed 0.003 seconds) [236536.781172] OOM killer disabled. [236536.781175] Freezing remaining freezable tasks [236536.782153] Freezing remaining freezable tasks completed (elapsed 0.000 seconds) [236536.782259] printk: Suspending console(s) (use no_console_suspend to debug) [236537.242630] ACPI: EC: interrupt blocked [236537.359415] ACPI: PM: Preparing to enter system sleep state S3 [236537.386324] ACPI: EC: event blocked [236537.386326] ACPI: EC: EC stopped [236537.386327] ACPI: PM: Saving platform NVS memory [236537.386577] Disabling non-boot CPUs ... [236537.388698] smpboot: CPU 1 is now offline [236537.394986] smpboot: CPU 2 is now offline [236537.397173] smpboot: CPU 3 is now offline [236537.399537] smpboot: CPU 4 is now offline [236537.402036] smpboot: CPU 5 is now offline [236537.403763] smpboot: CPU 6 is now offline [236537.405616] smpboot: CPU 7 is now offline [236537.412471] ACPI: PM: Low-level resume complete [236537.412555] ACPI: EC: EC started [236537.412556] ACPI: PM: Restoring platform NVS memory [236537.414280] Enabling non-boot CPUs ... [236537.414325] x86: Booting SMP configuration: [236537.414325] smpboot: Booting Node 0 Processor 1 APIC 0x2 [236537.415395] CPU1 is up [236537.415423] smpboot: Booting Node 0 Processor 2 APIC 0x4 [236537.416625] CPU2 is up [236537.416647] smpboot: Booting Node 0 Processor 3 APIC 0x6 [236537.417802] CPU3 is up [236537.417823] smpboot: Booting Node 0 Processor 4 APIC 0x1 [236537.419174] CPU4 is up [236537.419201] smpboot: Booting Node 0 Processor 5 APIC 0x3 [236537.420323] CPU5 is up [236537.420344] smpboot: Booting Node 0 Processor 6 APIC 0x5 [236537.421731] CPU6 is up [236537.421770] smpboot: Booting Node 0 Processor 7 APIC 0x7 [236537.423232] CPU7 is up [236537.430057] ACPI: PM: Waking up from system sleep state S3 [236537.474460] ACPI: EC: interrupt unblocked [236538.704340] ACPI: EC: event unblocked [236538.708034] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [236538.712103] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [236538.712110] usb usb1: root hub lost power or was reset [236538.712113] usb usb2: root hub lost power or was reset [236538.712627] mhi mhi0: Resuming from non M3 state (RESET) [236538.712630] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [236538.712640] mhi-pci-generic 0000:08:00.0: device recovery started [236538.753530] mhi mhi0: Requested to power ON [236538.753544] mhi mhi0: Power on setup success [236538.756831] nvme nvme0: 8/0/0 default/read/poll queues [236539.021684] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [236539.207473] OOM killer enabled. [236539.207477] Restarting tasks ... [236539.207455] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [236539.208185] usb 3-3: USB disconnect, device number 87 [236539.208101] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [236539.216336] done. [236539.216355] random: crng reseeded on system resumption [236539.221236] mhi mhi0: Wait for device to enter SBL or Mission mode [236539.362022] thermal thermal_zone6: failed to read out thermal zone (-61) [236539.385248] usb 3-3: new full-speed USB device number 90 using xhci_hcd [236539.405759] PM: suspend exit [236539.546252] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [236539.546257] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [236539.546258] usb 3-3: SerialNumber: ... [236539.722960] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [236542.117287] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [236543.080430] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [236543.082899] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [236543.138019] wlp0s20f3: authenticated [236543.141146] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [236543.151858] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=5) [236543.157339] wlp0s20f3: associated [236543.225178] wlp0s20f3: Limiting TX power to 27 (30 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [236543.261779] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [236546.361228] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [236612.418374] lockdown_is_locked_down: 2 callbacks suppressed [236612.488235] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [236612.981893] PM: suspend entry (deep) [236612.984022] Filesystems sync: 0.002 seconds [236613.100447] Freezing user space processes [236613.103793] Freezing user space processes completed (elapsed 0.003 seconds) [236613.103802] OOM killer disabled. [236613.103805] Freezing remaining freezable tasks [236613.105099] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [236613.105205] printk: Suspending console(s) (use no_console_suspend to debug) [236613.468534] ACPI: EC: interrupt blocked [236613.582353] ACPI: PM: Preparing to enter system sleep state S3 [236613.609312] ACPI: EC: event blocked [236613.609315] ACPI: EC: EC stopped [236613.609316] ACPI: PM: Saving platform NVS memory [236613.609550] Disabling non-boot CPUs ... [236613.611769] smpboot: CPU 1 is now offline [236613.615246] smpboot: CPU 2 is now offline [236613.617978] smpboot: CPU 3 is now offline [236613.621784] smpboot: CPU 4 is now offline [236613.624038] smpboot: CPU 5 is now offline [236613.625661] smpboot: CPU 6 is now offline [236613.627399] smpboot: CPU 7 is now offline [236613.634466] ACPI: PM: Low-level resume complete [236613.634737] ACPI: EC: EC started [236613.634738] ACPI: PM: Restoring platform NVS memory [236613.636458] Enabling non-boot CPUs ... [236613.636520] x86: Booting SMP configuration: [236613.636520] smpboot: Booting Node 0 Processor 1 APIC 0x2 [236613.637625] CPU1 is up [236613.637656] smpboot: Booting Node 0 Processor 2 APIC 0x4 [236613.638898] CPU2 is up [236613.638921] smpboot: Booting Node 0 Processor 3 APIC 0x6 [236613.640163] CPU3 is up [236613.640183] smpboot: Booting Node 0 Processor 4 APIC 0x1 [236613.641420] CPU4 is up [236613.641446] smpboot: Booting Node 0 Processor 5 APIC 0x3 [236613.642585] CPU5 is up [236613.642606] smpboot: Booting Node 0 Processor 6 APIC 0x5 [236613.643978] CPU6 is up [236613.643998] smpboot: Booting Node 0 Processor 7 APIC 0x7 [236613.645502] CPU7 is up [236613.652190] ACPI: PM: Waking up from system sleep state S3 [236613.698952] ACPI: EC: interrupt unblocked [236614.936230] ACPI: EC: event unblocked [236614.941652] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [236614.943374] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [236614.943376] usb usb1: root hub lost power or was reset [236614.943377] usb usb2: root hub lost power or was reset [236614.943579] mhi mhi0: Resuming from non M3 state (RESET) [236614.943581] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [236614.943586] mhi-pci-generic 0000:08:00.0: device recovery started [236614.957054] mhi mhi0: Requested to power ON [236614.957065] mhi mhi0: Power on setup success [236614.990956] nvme nvme0: 8/0/0 default/read/poll queues [236615.256961] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [236615.424745] mhi mhi0: Wait for device to enter SBL or Mission mode [236615.950920] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [236617.943727] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [236617.944043] OOM killer enabled. [236617.944047] Restarting tasks ... [236617.944225] usb 3-3: USB disconnect, device number 90 [236617.949088] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [236617.951043] done. [236617.951062] random: crng reseeded on system resumption [236617.962357] thermal thermal_zone6: failed to read out thermal zone (-61) [236618.104536] usb 3-3: new full-speed USB device number 91 using xhci_hcd [236618.140725] PM: suspend exit [236618.160542] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [236618.253871] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [236618.253878] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [236618.253881] usb 3-3: SerialNumber: ... [236618.392808] usb 3-7: USB disconnect, device number 86 [236622.105944] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [236622.113034] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [236622.178778] wlp0s20f3: authenticated [236622.180547] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [236622.190031] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=1) [236622.195879] wlp0s20f3: associated [236622.277204] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [236622.277223] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [236622.990208] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [237916.122639] usb 3-7: new low-speed USB device number 92 using xhci_hcd [237916.274740] usb 3-7: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=63.00 [237916.274754] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=... [237916.274760] usb 3-7: Product: USB Optical Mouse [237916.274764] usb 3-7: Manufacturer: Logitech [237916.278561] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/0003:046D:C05A.0009/input/input36 [237916.278891] hid-generic 0003:046D:C05A.0009: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-7/input0 [245756.019406] lockdown_is_locked_down: 3 callbacks suppressed [245756.091715] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [245756.823640] PM: suspend entry (deep) [245756.828223] Filesystems sync: 0.004 seconds [245756.948103] Freezing user space processes [245757.043922] Freezing user space processes completed (elapsed 0.095 seconds) [245757.043939] OOM killer disabled. [245757.043941] Freezing remaining freezable tasks [245757.045969] Freezing remaining freezable tasks completed (elapsed 0.002 seconds) [245757.046103] printk: Suspending console(s) (use no_console_suspend to debug) [245757.635970] ACPI: EC: interrupt blocked [245757.746273] ACPI: PM: Preparing to enter system sleep state S3 [245757.773384] ACPI: EC: event blocked [245757.773387] ACPI: EC: EC stopped [245757.773387] ACPI: PM: Saving platform NVS memory [245757.773604] Disabling non-boot CPUs ... [245757.775563] smpboot: CPU 1 is now offline [245757.778357] smpboot: CPU 2 is now offline [245757.781143] smpboot: CPU 3 is now offline [245757.785603] smpboot: CPU 4 is now offline [245757.790046] smpboot: CPU 5 is now offline [245757.792648] smpboot: CPU 6 is now offline [245757.796149] smpboot: CPU 7 is now offline [245757.804108] ACPI: PM: Low-level resume complete [245757.804177] ACPI: EC: EC started [245757.804178] ACPI: PM: Restoring platform NVS memory [245757.805891] Enabling non-boot CPUs ... [245757.805952] x86: Booting SMP configuration: [245757.805952] smpboot: Booting Node 0 Processor 1 APIC 0x2 [245757.807033] CPU1 is up [245757.807064] smpboot: Booting Node 0 Processor 2 APIC 0x4 [245757.808295] CPU2 is up [245757.808321] smpboot: Booting Node 0 Processor 3 APIC 0x6 [245757.809540] CPU3 is up [245757.809561] smpboot: Booting Node 0 Processor 4 APIC 0x1 [245757.810882] CPU4 is up [245757.810909] smpboot: Booting Node 0 Processor 5 APIC 0x3 [245757.812161] CPU5 is up [245757.812183] smpboot: Booting Node 0 Processor 6 APIC 0x5 [245757.813530] CPU6 is up [245757.813552] smpboot: Booting Node 0 Processor 7 APIC 0x7 [245757.815031] CPU7 is up [245757.825745] ACPI: PM: Waking up from system sleep state S3 [245757.871579] ACPI: EC: interrupt unblocked [245759.071969] ACPI: EC: event unblocked [245759.076357] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [245759.079620] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [245759.079627] usb usb1: root hub lost power or was reset [245759.079630] usb usb2: root hub lost power or was reset [245759.080079] mhi mhi0: Resuming from non M3 state (RESET) [245759.080086] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [245759.080100] mhi-pci-generic 0000:08:00.0: device recovery started [245759.100815] mhi mhi0: Requested to power ON [245759.100829] mhi mhi0: Power on setup success [245759.126219] nvme nvme0: 8/0/0 default/read/poll queues [245759.392752] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [245759.604465] mhi mhi0: Wait for device to enter SBL or Mission mode [245759.610323] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [245759.610553] OOM killer enabled. [245759.610555] Restarting tasks ... [245759.610641] usb 3-3: USB disconnect, device number 91 [245759.611112] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [245759.625055] done. [245759.625093] random: crng reseeded on system resumption [245759.748283] usb 3-3: new full-speed USB device number 93 using xhci_hcd [245759.820235] thermal thermal_zone6: failed to read out thermal zone (-61) [245759.866233] PM: suspend exit [245759.897367] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [245759.897376] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [245759.897379] usb 3-3: SerialNumber: ... [245760.215478] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [245762.356436] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [245763.644336] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [245763.651556] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [245763.712677] wlp0s20f3: authenticated [245763.716375] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [245763.723323] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=1) [245763.728745] wlp0s20f3: associated [245763.804870] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [245763.804904] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [245766.772733] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [245772.924253] usb 3-6: new high-speed USB device number 94 using xhci_hcd [245773.078787] usb 3-6: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.60 [245773.078794] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [245773.078796] usb 3-6: Product: USB2.1 Hub [245773.078798] usb 3-6: Manufacturer: GenesysLogic [245773.080799] hub 3-6:1.0: USB hub found [245773.081068] hub 3-6:1.0: 2 ports detected [245773.392256] usb 3-6.1: new high-speed USB device number 95 using xhci_hcd [245773.523665] usb 3-6.1: New USB device found, idVendor=03f0, idProduct=0169, bcdDevice=55.71 [245773.523695] usb 3-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [245773.523698] usb 3-6.1: Product: USB2.1 Hub [245773.523700] usb 3-6.1: Manufacturer: GenesysLogic [245773.524956] hub 3-6.1:1.0: USB hub found [245773.525540] hub 3-6.1:1.0: 4 ports detected [266767.766061] usb 3-7: USB disconnect, device number 92 [266771.070992] usb 3-6: USB disconnect, device number 94 [266771.070998] usb 3-6.1: USB disconnect, device number 95 [266784.361169] lockdown_is_locked_down: 3 callbacks suppressed [266784.419723] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING) [266784.976660] PM: suspend entry (deep) [266784.980759] Filesystems sync: 0.004 seconds [266785.238092] Freezing user space processes [266785.241023] Freezing user space processes completed (elapsed 0.002 seconds) [266785.241032] OOM killer disabled. [266785.241034] Freezing remaining freezable tasks [266785.242364] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [266785.242485] printk: Suspending console(s) (use no_console_suspend to debug) [266785.819680] ACPI: EC: interrupt blocked [266785.952213] ACPI: PM: Preparing to enter system sleep state S3 [266785.978988] ACPI: EC: event blocked [266785.978991] ACPI: EC: EC stopped [266785.978991] ACPI: PM: Saving platform NVS memory [266785.979221] Disabling non-boot CPUs ... [266785.981410] smpboot: CPU 1 is now offline [266785.985640] smpboot: CPU 2 is now offline [266785.988900] smpboot: CPU 3 is now offline [266785.992468] smpboot: CPU 4 is now offline [266785.997258] smpboot: CPU 5 is now offline [266786.001373] smpboot: CPU 6 is now offline [266786.003620] smpboot: CPU 7 is now offline [266786.010860] ACPI: PM: Low-level resume complete [266786.010951] ACPI: EC: EC started [266786.010952] ACPI: PM: Restoring platform NVS memory [266786.012312] Enabling non-boot CPUs ... [266786.012352] x86: Booting SMP configuration: [266786.012353] smpboot: Booting Node 0 Processor 1 APIC 0x2 [266786.013378] CPU1 is up [266786.013411] smpboot: Booting Node 0 Processor 2 APIC 0x4 [266786.014457] CPU2 is up [266786.014478] smpboot: Booting Node 0 Processor 3 APIC 0x6 [266786.015647] CPU3 is up [266786.015667] smpboot: Booting Node 0 Processor 4 APIC 0x1 [266786.016982] CPU4 is up [266786.017007] smpboot: Booting Node 0 Processor 5 APIC 0x3 [266786.018571] CPU5 is up [266786.018592] smpboot: Booting Node 0 Processor 6 APIC 0x5 [266786.019993] CPU6 is up [266786.020015] smpboot: Booting Node 0 Processor 7 APIC 0x7 [266786.021455] CPU7 is up [266786.032248] ACPI: PM: Waking up from system sleep state S3 [266786.079921] ACPI: EC: interrupt unblocked [266787.277538] ACPI: EC: event unblocked [266787.281598] iwlwifi 0000:00:14.3: RF_KILL bit toggled to enable radio. [266787.286755] xhci_hcd 0000:00:0d.0: xHC error in resume, USBSTS 0x401, Reinit [266787.286762] usb usb1: root hub lost power or was reset [266787.286766] usb usb2: root hub lost power or was reset [266787.287400] mhi mhi0: Resuming from non M3 state (RESET) [266787.287407] mhi-pci-generic 0000:08:00.0: failed to resume device: -22 [266787.287426] mhi-pci-generic 0000:08:00.0: device recovery started [266787.314619] mhi mhi0: Requested to power ON [266787.314633] mhi mhi0: Power on setup success [266787.331696] nvme nvme0: 8/0/0 default/read/poll queues [266787.598458] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [266787.818121] mhi mhi0: Wait for device to enter SBL or Mission mode [266787.836133] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [266787.836430] OOM killer enabled. [266787.836435] Restarting tasks ... [266787.836536] usb 3-3: USB disconnect, device number 93 [266787.836782] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [266787.851987] done. [266787.852026] random: crng reseeded on system resumption [266787.961928] usb 3-3: new full-speed USB device number 96 using xhci_hcd [266788.001074] thermal thermal_zone6: failed to read out thermal zone (-61) [266788.048558] PM: suspend exit [266788.110956] usb 3-3: New USB device found, idVendor=06cb, idProduct=00fc, bcdDevice= 0.00 [266788.110963] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=... [266788.110965] usb 3-3: SerialNumber: ... [266788.292386] ish-hid {HASH_42D-BB0D-1B3D-10CD-5E0584CA251B}: [hid-ish]: enum_devices_done OK, num_hid_devices=3 [266790.498045] hid-sensor-hub 001F:8087:0AC2.0004: timeout waiting for response from ISHTP device [266792.157211] wlp0s20f3: authenticate with 98119FD68CFEDA0B031C4ABF7EC98FB0 [266792.166177] wlp0s20f3: send auth to 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [266792.234463] wlp0s20f3: authenticated [266792.238040] wlp0s20f3: associate with 98119FD68CFEDA0B031C4ABF7EC98FB0 (try 1/3) [266792.249428] wlp0s20f3: RX AssocResp from 98119FD68CFEDA0B031C4ABF7EC98FB0 (capab=0x1511 status=0 aid=1) [266792.255606] wlp0s20f3: associated [266792.314501] wlp0s20f3: Limiting TX power to 20 (23 - 3) dBm as advertised by 98119FD68CFEDA0B031C4ABF7EC98FB0 [266792.338892] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready [266795.367888] mhi-pci-generic 0000:08:00.0: failed to suspend device: -16 [267424.858083] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [267424.879402] usb 4-1: New USB device found, idVendor=1058, idProduct=0827, bcdDevice=10.12 [267424.879416] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [267424.879421] usb 4-1: Product: My Passport 0827 [267424.879425] usb 4-1: Manufacturer: Western Digital [267424.879428] usb 4-1: SerialNumber: ... [267425.476309] usb-storage 4-1:1.0: USB Mass Storage device detected [267425.476626] scsi host0: usb-storage 4-1:1.0 [267425.476851] usbcore: registered new interface driver usb-storage [267425.482547] usbcore: registered new interface driver uas [267426.491472] scsi 0:0:0:0: Direct-Access WD My Passport 0827 1012 PQ: 0 ANSI: 6 [267426.492303] scsi 0:0:0:1: Enclosure WD SES Device 1012 PQ: 0 ANSI: 6 [267426.494326] sd 0:0:0:0: Attached scsi generic sg0 type 0 [267426.494463] scsi 0:0:0:1: Attached scsi generic sg1 type 13 [267426.495473] sd 0:0:0:0: [sda] Spinning up disk... [267427.513876] .....ready [267431.610180] sd 0:0:0:0: [sda] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) [267431.610665] sd 0:0:0:0: [sda] Write Protect is off [267431.610672] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08 [267431.611036] sd 0:0:0:0: [sda] No Caching mode page found [267431.611043] sd 0:0:0:0: [sda] Assuming drive cache: write through [267431.690118] sda: sda1 [267431.690564] sd 0:0:0:0: [sda] Attached SCSI disk [267431.730048] scsi 0:0:0:1: Wrong diagnostic page; asked for 1 got 8 [267431.730056] scsi 0:0:0:1: Failed to get diagnostic page 0x1 [267431.730060] scsi 0:0:0:1: Failed to bind enclosure -19 [267431.730105] ses 0:0:0:1: Attached Enclosure device [267432.080158] ntfs3: Max link count 4000 [267432.080167] ntfs3: Enabled Linux POSIX ACLs support [267432.080169] ntfs3: Read-only LZX/Xpress compression included [267432.133951] ntfs3: sda1: volume is dirty and "force" flag is not set! [267433.893968] ntfs3: sda1: volume is dirty and "force" flag is not set! [267444.931359] ntfs3: sda1: volume is dirty and "force" flag is not set! [267458.999477] rfkill: input handler enabled [267459.231637] i915 0000:00:02.0: [drm] *ERROR* [ENCODER:350:DDI TC3/PHY TC3][DPRX] Failed to enable link training [267460.317682] wlp0s20f3: deauthenticating from 98119FD68CFEDA0B031C4ABF7EC98FB0 by local choice (Reason: 3=DEAUTH_LEAVING)