[ 0.593652] i2c_dev: i2c /dev entries driver [ 0.600116] SCSI subsystem initialized [ 0.604948] device-mapper: uevent: version 1.0.3 [ 0.605005] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.780918] xor: automatically using best checksumming function avx [ 0.800144] raid6: avx2x4 gen() 16961 MB/s [ 0.817144] raid6: avx2x2 gen() 17929 MB/s [ 0.834149] raid6: avx2x1 gen() 15058 MB/s [ 0.834152] raid6: using algorithm avx2x2 gen() 17929 MB/s [ 0.851145] raid6: .... xor() 11468 MB/s, rmw enabled [ 0.851147] raid6: using avx2x2 recovery algorithm [ 0.908417] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 0.923978] ACPI: bus type USB registered [ 0.924003] usbcore: registered new interface driver usbfs [ 0.924011] usbcore: registered new interface driver hub [ 0.924021] usbcore: registered new device driver usb [ 1.160719] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.165736] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.170185] ACPI: button: Power Button [PWRF] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.175219] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.188245] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.188252] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.188263] ehci-pci 0000:00:1a.0: debug port 2 [ 1.190051] Linux agpgart interface v0.103 [ 1.192179] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf793c000 [ 1.199149] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.199194] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 1.199197] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.199199] usb usb1: Product: EHCI Host Controller [ 1.199201] usb usb1: Manufacturer: Linux 6.3.5-desktop-3omv2390 ehci_hcd [ 1.199203] usb usb1: SerialNumber: ... [ 1.199352] hub 1-0:1.0: USB hub found [ 1.199358] hub 1-0:1.0: 2 ports detected [ 1.199507] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.199514] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.199524] ehci-pci 0000:00:1d.0: debug port 2 [ 1.203442] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf793b000 [ 1.205185] cryptd: max_cpu_qlen set to 1000 [ 1.210148] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.210169] libata version 3.00 loaded. [ 1.210188] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 1.210191] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.210194] usb usb2: Product: EHCI Host Controller [ 1.210195] usb usb2: Manufacturer: Linux 6.3.5-desktop-3omv2390 ehci_hcd [ 1.210197] usb usb2: SerialNumber: ... [ 1.210344] hub 2-0:1.0: USB hub found [ 1.210351] hub 2-0:1.0: 2 ports detected [ 1.214165] AVX2 version of gcm_enc/dec engaged. [ 1.214197] AES CTR mode by8 optimization enabled [ 1.225791] ahci 0000:00:1f.2: version 3.0 [ 1.225980] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x8 impl SATA mode [ 1.225985] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst [ 1.227322] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.227329] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.229087] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.229324] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.229328] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.229331] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.229372] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 1.229375] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.229377] usb usb3: Product: xHCI Host Controller [ 1.229379] usb usb3: Manufacturer: Linux 6.3.5-desktop-3omv2390 xhci-hcd [ 1.229380] usb usb3: SerialNumber: ... [ 1.229545] hub 3-0:1.0: USB hub found [ 1.229563] hub 3-0:1.0: 14 ports detected [ 1.234151] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03 [ 1.234155] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.234157] usb usb4: Product: xHCI Host Controller [ 1.234159] usb usb4: Manufacturer: Linux 6.3.5-desktop-3omv2390 xhci-hcd [ 1.234161] usb usb4: SerialNumber: ... [ 1.234988] hub 4-0:1.0: USB hub found [ 1.235002] hub 4-0:1.0: 6 ports detected [ 1.235654] usb: port power management may be unreliable [ 1.238842] scsi host0: ahci [ 1.243183] scsi host1: ahci [ 1.245315] scsi host2: ahci [ 1.246848] scsi host3: ahci [ 1.246952] scsi host4: ahci [ 1.247186] scsi host5: ahci [ 1.247274] ata1: DUMMY [ 1.247275] ata2: DUMMY [ 1.247276] ata3: DUMMY [ 1.247278] ata4: SATA max UDMA/133 abar m2048@0xf793a000 port 0xf793a280 irq 31 [ 1.247280] ata5: DUMMY [ 1.247281] ata6: DUMMY [ 1.247576] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.247580] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.247755] ACPI: bus type drm_connector registered [ 1.247852] scsi host6: ahci [ 1.247937] scsi host7: ahci [ 1.247975] ata7: SATA max UDMA/133 abar m512@0xf7810000 port 0xf7810100 irq 33 [ 1.247977] ata8: SATA max UDMA/133 abar m512@0xf7810000 port 0xf7810180 irq 33 [ 1.343143] tsc: Refined TSC clocksource calibration: 3491.913 MHz [ 1.343148] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3255790e5ea, max_idle_ns: 440795224414 ns [ 1.343162] clocksource: Switched to clocksource tsc [ 1.440144] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.448149] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.472148] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.555217] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.555220] ata7: SATA link down (SStatus 0 SControl 300) [ 1.555243] ata8: SATA link down (SStatus 0 SControl 300) [ 1.567161] ata4.00: ATA-10: SSD 512GB, VE0R631D, max UDMA/133 [ 1.568465] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.568468] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.568635] hub 1-1:1.0: USB hub found [ 1.568714] hub 1-1:1.0: 6 ports detected [ 1.572955] ata4.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.576464] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.576468] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.576632] hub 2-1:1.0: USB hub found [ 1.576715] hub 2-1:1.0: 8 ports detected [ 1.592573] ata4.00: configured for UDMA/133 [ 1.592649] scsi 3:0:0:0: Direct-Access ATA SSD 512GB 631D PQ: 0 ANSI: 5 [ 1.598330] usb 3-3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 1.598334] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.598336] usb 3-3: Product: USB 2.0 Hub [ 1.599015] hub 3-3:1.0: USB hub found [ 1.599073] hub 3-3:1.0: 4 ports detected [ 1.608279] sd 3:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 1.608289] sd 3:0:0:0: [sda] Write Protect is off [ 1.608292] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.608302] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.608317] sd 3:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.621406] sda: sda1 sda2 sda3 sda4 sda5 [ 1.621547] sd 3:0:0:0: [sda] Attached SCSI disk [ 1.661272] BTRFS: device label ... devid 1 transid 345 /dev/sda3 scanned by (udev-worker) (397) [ 1.712293] usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd [ 1.721329] MXM: GUID detected in BIOS [ 1.721566] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 1.725866] usb 4-5: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00 [ 1.725870] usb 4-5: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.727092] hub 4-5:1.0: USB hub found [ 1.727358] hub 4-5:1.0: 4 ports detected [ 1.745883] EXT4-fs (sda5): orphan cleanup on readonly fs [ 1.746112] EXT4-fs (sda5): mounted filesystem HASH_CB3-6DA4-6BBD-1BB6-E71D1EC6A1A7 with ordered data mode. Quota mode: none. [ 1.762335] i915 0000:00:02.0: enabling device (0006 -> 0007) [ 1.763456] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=mem [ 1.771562] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 1.772704] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.772953] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ 1.789157] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 1.796793] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 1.803021] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 1.839148] usb 3-9: new high-speed USB device number 3 using xhci_hcd [ 1.965331] usb 3-9: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00 [ 1.965335] usb 3-9: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.966173] hub 3-9:1.0: USB hub found [ 1.966196] hub 3-9:1.0: 4 ports detected [ 2.079294] usb 4-6: new SuperSpeed USB device number 3 using xhci_hcd [ 2.092864] usb 4-6: New USB device found, idVendor=045b, idProduct=0210, bcdDevice= 1.00 [ 2.092867] usb 4-6: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.094143] hub 4-6:1.0: USB hub found [ 2.094396] hub 4-6:1.0: 4 ports detected [ 2.270144] usb 3-3.1: new full-speed USB device number 4 using xhci_hcd [ 2.460616] usb 3-3.1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01 [ 2.460619] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.460621] usb 3-3.1: Product: USB Receiver [ 2.460623] usb 3-3.1: Manufacturer: Logitech [ 2.496626] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 2.496629] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 2.496632] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 2.496634] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 2.496636] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030 [ 2.496639] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000f00 00000000 [ 2.496642] nouveau 0000:01:00.0: DRM: DCB outp 02: 08811fc6 0f420010 [ 2.496644] nouveau 0000:01:00.0: DRM: DCB outp 03: 08011f82 00020010 [ 2.496646] nouveau 0000:01:00.0: DRM: DCB outp 04: 02822fa6 0f420010 [ 2.496648] nouveau 0000:01:00.0: DRM: DCB outp 05: 02022f62 00020010 [ 2.496650] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 2.496652] nouveau 0000:01:00.0: DRM: DCB conn 01: 00010146 [ 2.496653] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002246 [ 2.497956] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 2.499746] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1 [ 2.572144] usb 3-10: new high-speed USB device number 5 using xhci_hcd [ 2.698327] usb 3-10: New USB device found, idVendor=045b, idProduct=0209, bcdDevice= 1.00 [ 2.698330] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.699236] hub 3-10:1.0: USB hub found [ 2.699259] hub 3-10:1.0: 4 ports detected [ 2.705753] fbcon: nouveaudrmfb (fb0) is primary device [ 2.705755] fbcon: Deferring console take-over [ 2.705757] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 2.774171] usb 3-9.3: new full-speed USB device number 6 using xhci_hcd [ 3.361972] zram0: detected capacity change from 0 to 16777216 [ 3.418152] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.418156] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 3.418431] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.418434] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 3.440860] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDscFS [ 3.455564] e1000e: Intel(R) PRO/1000 Network Driver [ 3.455567] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.457463] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.460491] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20221020/utaddress-204) [ 3.460498] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.460500] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20221020/utaddress-204) [ 3.460505] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.460506] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20221020/utaddress-204) [ 3.460510] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20221020/utaddress-204) [ 3.460514] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.460515] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20221020/utaddress-204) [ 3.460518] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20221020/utaddress-204) [ 3.460521] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 3.460522] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 3.467519] hid: raw HID events driver (C) Jiri Kosina [ 3.479002] usbcore: registered new interface driver usbhid [ 3.479005] usbhid: USB HID core driver [ 3.488636] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 3.488774] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 3.488804] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.489261] i2c i2c-21: 4/4 memory slots populated (from DMI) [ 3.489569] i2c i2c-21: Successfully instantiated SPD at 0x50 [ 3.489880] i2c i2c-21: Successfully instantiated SPD at 0x51 [ 3.490180] i2c i2c-21: Successfully instantiated SPD at 0x52 [ 3.490482] i2c i2c-21: Successfully instantiated SPD at 0x53 [ 3.509065] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 3.510377] snd_hda_intel 0000:01:00.1: Disabling MSI [ 3.510386] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 3.515947] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 3.515949] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.515950] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.515951] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.515951] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.531992] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 3.534517] Bluetooth: Core ver 2.22 [ 3.534527] NET: Registered PF_BLUETOOTH protocol family [ 3.534528] Bluetooth: HCI device and connection manager initialized [ 3.534531] Bluetooth: HCI socket layer initialized [ 3.534533] Bluetooth: L2CAP socket layer initialized [ 3.534534] Bluetooth: SCO socket layer initialized [ 3.553171] usbcore: registered new interface driver btusb [ 3.557082] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=6 rev=22bb [ 3.557086] Bluetooth: hci0: LMP ver=6 subver=22bb; manufacturer=10 [ 3.563210] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC898: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 3.563215] snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.563217] snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.563220] snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0 [ 3.563222] snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x1e [ 3.563223] snd_hda_codec_realtek hdaudioC1D2: inputs: [ 3.563225] snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18 [ 3.563227] snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19 [ 3.563229] snd_hda_codec_realtek hdaudioC1D2: Line=0x1a [ 3.563231] snd_hda_codec_realtek hdaudioC1D2: CD=0x1c [ 3.563232] snd_hda_codec_realtek hdaudioC1D2: dig-in=0x1f [ 3.572349] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau]) [ 3.575619] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input3 [ 3.575662] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4 [ 3.575702] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5 [ 3.595067] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input7 [ 3.595214] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input8 [ 3.595260] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6 [ 3.595296] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9 [ 3.595342] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10 [ 3.595398] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 3.595440] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 3.595537] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 3.595622] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 3.595669] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 3.595711] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 3.595752] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 3.597211] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) D9E34EFFE9C510E4D5B456630FD2E82E [ 3.597220] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.597247] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 3.618294] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/0003:046D:C534.0001/input/input18 [ 3.619430] iTCO_vendor_support: vendor-support=0 [ 3.628075] at24 21-0050: supply vcc not found, using dummy regulator [ 3.633402] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 3.633557] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 3.633765] at24 21-0050: 256 byte spd EEPROM, read-only [ 3.633789] at24 21-0051: supply vcc not found, using dummy regulator [ 3.636216] intel_rapl_common: Found RAPL domain package [ 3.636219] intel_rapl_common: Found RAPL domain core [ 3.636220] intel_rapl_common: Found RAPL domain uncore [ 3.636222] intel_rapl_common: Found RAPL domain dram [ 3.637098] at24 21-0051: 256 byte spd EEPROM, read-only [ 3.637412] at24 21-0052: supply vcc not found, using dummy regulator [ 3.637980] at24 21-0052: 256 byte spd EEPROM, read-only [ 3.638010] at24 21-0053: supply vcc not found, using dummy regulator [ 3.638709] at24 21-0053: 256 byte spd EEPROM, read-only [ 3.670969] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3.1/input0 [ 3.671524] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/0003:046D:C534.0002/input/input19 [ 3.671661] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/0003:046D:C534.0002/input/input20 [ 3.680064] spi-nor spi0.0: mx25l12805d (16384 Kbytes) [ 3.682637] Creating 1 MTD partitions on "intel-spi": [ 3.682639] 0x000000000000-0x000001000000 : "BIOS" [ 3.723281] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/0003:046D:C534.0002/input/input21 [ 3.723491] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.1/input1 [ 3.743215] logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3.1/input0 [ 3.837757] logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.1/input1 [ 3.890062] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 1 [ 3.892060] logitech-djreceiver 0003:046D:C534.0002: device of type eQUAD nano Lite (0x0a) connected on slot 2 [ 3.892339] input: Logitech Wireless Keyboard PID:4023 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input24 [ 3.892416] hid-generic 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-3.1/input1:1 [ 3.894499] input: Logitech Wireless Mouse PID:4022 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/0003:046D:C534.0002/0003:046D:4022.0004/input/input29 [ 3.894587] hid-generic 0003:046D:4022.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4022] on usb-0000:00:14.0-3.1/input1:2 [ 4.333666] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.333669] Bluetooth: BNEP filters: protocol multicast [ 4.333672] Bluetooth: BNEP socket layer initialized [ 4.335029] Bluetooth: MGMT ver 1.22 [ 5.456642] logitech-hidpp-device 0003:046D:4023.0003: HID++ 2.0 device connected. [ 5.812082] logitech-hidpp-device 0003:046D:4023.0003: hidpp_devicenametype_get_count: received protocol error 0x07 [ 6.501007] input: Logitech Wireless Keyboard PID:4023 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/0003:046D:C534.0002/0003:046D:4023.0003/input/input33 [ 6.501124] logitech-hidpp-device 0003:046D:4023.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Keyboard PID:4023] on usb-0000:00:14.0-3.1/input1:1 [ 6.514110] logitech-hidpp-device 0003:046D:4022.0004: HID++ 1.0 device connected. [ 6.522131] input: Logitech Wireless Mouse PID:4022 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.1/0003:046D:C534.0002/0003:046D:4022.0004/input/input34 [ 6.522302] logitech-hidpp-device 0003:046D:4022.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4022] on usb-0000:00:14.0-3.1/input1:2 [ 124.211310] BTRFS info (device sda3): using crc32c (crc32c-intel) checksum algorithm [ 124.211317] BTRFS info (device sda3): using free space tree [ 124.218701] BTRFS info (device sda3): enabling ssd optimizations [ 124.218703] BTRFS info (device sda3): auto enabling async discard [ 124.268068] BTRFS: device label ... devid 1 transid 346 /dev/sda3 scanned by mount (8593) [ 124.268415] BTRFS info (device sda3): using crc32c (crc32c-intel) checksum algorithm [ 124.268421] BTRFS info (device sda3): using free space tree [ 124.275194] BTRFS info (device sda3): enabling ssd optimizations [ 124.275196] BTRFS info (device sda3): auto enabling async discard [ 124.321279] BTRFS: device label ... devid 1 transid 348 /dev/sda3 scanned by mount (8625) [ 124.321746] BTRFS info (device sda3): using crc32c (crc32c-intel) checksum algorithm [ 124.321754] BTRFS info (device sda3): using free space tree [ 124.328777] BTRFS info (device sda3): enabling ssd optimizations [ 124.328779] BTRFS info (device sda3): auto enabling async discard [ 124.377927] BTRFS: device label ... devid 1 transid 350 /dev/sda3 scanned by mount (8657) [ 124.378257] BTRFS info (device sda3): using crc32c (crc32c-intel) checksum algorithm [ 124.378265] BTRFS info (device sda3): using free space tree [ 124.385128] BTRFS info (device sda3): enabling ssd optimizations [ 124.385134] BTRFS info (device sda3): auto enabling async discard [ 124.450197] BTRFS: device label ... devid 1 transid 352 /dev/sda3 scanned by mount (8699) [ 124.450538] BTRFS info (device sda3): using crc32c (crc32c-intel) checksum algorithm [ 124.450546] BTRFS info (device sda3): using free space tree [ 124.458342] BTRFS info (device sda3): enabling ssd optimizations [ 124.458344] BTRFS info (device sda3): auto enabling async discard [ 124.666278] BTRFS: device label ... devid 1 transid 354 /dev/sda3 scanned by mount (8869) [ 124.666812] BTRFS info (device sda3): using crc32c (crc32c-intel) checksum algorithm [ 124.666820] BTRFS info (device sda3): using free space tree [ 124.674723] BTRFS info (device sda3): enabling ssd optimizations [ 124.674725] BTRFS info (device sda3): auto enabling async discard [ 139.227802] zram0: detected capacity change from 16777216 to 0