[ 0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-17 [ 0.000000] Linux version 6.0.15-200.fc36.x86_64 (XXX@XXX) (gcc (GCC) 12.2.1 20221121 (Red Hat 12.2.1-4), GNU ld version 2.37-37.fc36) #1 SMP PREEMPT_DYNAMIC Wed Dec 21 18:46:09 UTC 2022 [ 0.000000] Command line: BOOT_IMAGE=(hd1,gpt5)/boot/vmlinuz-6.0.15-200.fc36.x86_64 root=UUID=HASH_B5C-4FE7-82FE-08A8-16D421BEEF74 ro rhgb quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] signal: max sigframe size: 2032 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000005e000-0x000000000005efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000005f000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040400000-0x0000000065e27fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000065e28000-0x0000000065e28fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000065e29000-0x0000000065e29fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000065e2a000-0x000000006eb71fff] usable [ 0.000000] BIOS-e820: [mem 0x000000006eb72000-0x000000006f17dfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006f17e000-0x000000006f1fafff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000006f1fb000-0x000000006f6c1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006f6c2000-0x000000006fffdfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006fffe000-0x000000006fffefff] usable [ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x0000000077ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000781fffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078200000-0x000000007e7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x60f4e018-0x60f5e057] usable ==> usable [ 0.000000] e820: update [mem 0x60f4e018-0x60f5e057] usable ==> usable [ 0.000000] e820: update [mem 0x60f30018-0x60f4de57] usable ==> usable [ 0.000000] e820: update [mem 0x60f30018-0x60f4de57] usable ==> usable [ 0.000000] e820: update [mem 0x60f03018-0x60f2f857] usable ==> usable [ 0.000000] e820: update [mem 0x60f03018-0x60f2f857] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000005dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000005e000-0x000000000005efff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000005f000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000040400000-0x0000000060f03017] usable [ 0.000000] reserve setup_data: [mem 0x0000000060f03018-0x0000000060f2f857] usable [ 0.000000] reserve setup_data: [mem 0x0000000060f2f858-0x0000000060f30017] usable [ 0.000000] reserve setup_data: [mem 0x0000000060f30018-0x0000000060f4de57] usable [ 0.000000] reserve setup_data: [mem 0x0000000060f4de58-0x0000000060f4e017] usable [ 0.000000] reserve setup_data: [mem 0x0000000060f4e018-0x0000000060f5e057] usable [ 0.000000] reserve setup_data: [mem 0x0000000060f5e058-0x0000000065e27fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000065e28000-0x0000000065e28fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x0000000065e29000-0x0000000065e29fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000065e2a000-0x000000006eb71fff] usable [ 0.000000] reserve setup_data: [mem 0x000000006eb72000-0x000000006f17dfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000006f17e000-0x000000006f1fafff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000006f1fb000-0x000000006f6c1fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000006f6c2000-0x000000006fffdfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000006fffe000-0x000000006fffefff] usable [ 0.000000] reserve setup_data: [mem 0x000000006ffff000-0x0000000077ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000781fffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000078200000-0x000000007e7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000047f7fffff] usable [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x6f197000 ACPI=0x6f197000 SMBIOS=0x6fc6a000 SMBIOS 3.0=0x6fc69000 ESRT=0x6fc25698 MEMATTR=0x69adc298 MOKvar=0x6fc81000 RNG=0x6f196018 [ 0.000000] efi: seeding entropy pool [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.2.1 present. [ 0.000000] DMI: Dell Inc. Inspiron 5580/0W14M4, BIOS 2.11.0 08/11/2021 [ 0.000000] tsc: Detected 1800.000 MHz processor [ 0.000574] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000576] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000586] last_pfn = 0x47f800 max_arch_pfn = 0x400000000 [ 0.000728] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001371] last_pfn = 0x78200 max_arch_pfn = 0x400000000 [ 0.007358] found SMP MP-table at [mem 0x000fcfa0-0x000fcfaf] esrt: Reserving ESRT space from 0x000000006fc25698 to 0x000000006fc256d0. [ 0.007378] Using GB pages for direct mapping [ 0.007780] secureboot: Secure boot disabled [ 0.007780] RAMDISK: [mem 0x60f5f000-0x63332fff] ACPI: Early table checksum verification disabled [ 0.007787] ACPI: RSDP 0x000000006F197000 000024 (v02 DELL ) [ 0.007790] ACPI: XSDT 0x000000006F1970C0 000104 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.007794] ACPI: FACP 0x000000006F1D9230 000114 (v06 DELL CBX3 01072009 AMI 00010013) [ 0.007798] ACPI: DSDT 0x000000006F197258 041FD8 (v02 DELL CBX3 01072009 INTL 20160527) [ 0.007800] ACPI: FACS 0x000000006F6C0C00 000040 [ 0.007802] ACPI: APIC 0x000000006F1D9348 0000BC (v04 DELL CBX3 01072009 AMI 00010013) [ 0.007804] ACPI: FPDT 0x000000006F1D9408 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.007806] ACPI: FIDT 0x000000006F1D9450 00009C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.007808] ACPI: MCFG 0x000000006F1D94F0 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.007810] ACPI: SSDT 0x000000006F1D9530 001B1C (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.007813] ACPI: BOOT 0x000000006F1DB050 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.007815] ACPI: SSDT 0x000000006F1DB078 0031C6 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.007817] ACPI: HPET 0x000000006F1DE240 000038 (v01 DELL\x CBX3 00000002 01000013) [ 0.007819] ACPI: SSDT 0x000000006F1DE278 004237 (v02 INTEL xh_whld4 00000000 INTL 20160527) [ 0.007821] ACPI: NHLT 0x000000006F1E24B0 00002D (v00 DELL\x CBX3 00000002 01000013) [ 0.007824] ACPI: UEFI 0x000000006F1E24E0 000042 (v01 DELL\x CBX3 00000002 01000013) [ 0.007826] ACPI: LPIT 0x000000006F1E2528 000094 (v01 DELL\x CBX3 00000002 01000013) [ 0.007828] ACPI: SSDT 0x000000006F1E25C0 000C2B (v02 DELL\x PtidDevc 00001000 INTL 20160527) [ 0.007830] ACPI: SSDT 0x000000006F1E31F0 0014E2 (v02 DELL\x TbtTypeC 00000000 INTL 20160527) [ 0.007832] ACPI: DBGP 0x000000006F1E46D8 000034 (v01 DELL\x CBX3 00000002 01000013) [ 0.007834] ACPI: DBG2 0x000000006F1E4710 000054 (v00 DELL\x CBX3 00000002 01000013) [ 0.007836] ACPI: SSDT 0x000000006F1E4768 0007DD (v02 DELL\x UsbCTabl 00001000 INTL 20160527) [ 0.007838] ACPI: SSDT 0x000000006F1E4F48 0049C8 (v02 DptfTa DptfTabl 00001000 INTL 20160527) [ 0.007840] ACPI: MSDM 0x000000006F1E9910 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.007843] ACPI: SLIC 0x000000006F1E9968 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.007845] ACPI: DMAR 0x000000006F1E9AE0 0000A8 (v01 INTEL EDK2 00000002 01000013) [ 0.007847] ACPI: SSDT 0x000000006F1E9B88 000144 (v02 Intel ADebTabl 00001000 INTL 20160527) [ 0.007849] ACPI: SSDT 0x000000006F1E9CD0 0005B8 (v02 SgRef SgRpSsdt 00001000 INTL 20160527) [ 0.007851] ACPI: UEFI 0x000000006F1EA288 00063A (v01 INTEL RstSataE 00000000 ?? 00000000) [ 0.007853] ACPI: UEFI 0x000000006F1EA8C8 00005C (v01 INTEL RstSataV 00000000 ?? 00000000) [ 0.007856] ACPI: SSDT 0x000000006F1EA928 001FF3 (v01 OptRef OptTabl 00001000 INTL 20160527) [ 0.007860] ACPI: Reserving FACP table memory at [mem 0x6f1d9230-0x6f1d9343] ACPI: Reserving DSDT table memory at [mem 0x6f197258-0x6f1d922f] ACPI: Reserving FACS table memory at [mem 0x6f6c0c00-0x6f6c0c3f] ACPI: Reserving APIC table memory at [mem 0x6f1d9348-0x6f1d9403] ACPI: Reserving FPDT table memory at [mem 0x6f1d9408-0x6f1d944b] ACPI: Reserving FIDT table memory at [mem 0x6f1d9450-0x6f1d94eb] ACPI: Reserving MCFG table memory at [mem 0x6f1d94f0-0x6f1d952b] ACPI: Reserving SSDT table memory at [mem 0x6f1d9530-0x6f1db04b] ACPI: Reserving BOOT table memory at [mem 0x6f1db050-0x6f1db077] ACPI: Reserving SSDT table memory at [mem 0x6f1db078-0x6f1de23d] ACPI: Reserving HPET table memory at [mem 0x6f1de240-0x6f1de277] ACPI: Reserving SSDT table memory at [mem 0x6f1de278-0x6f1e24ae] ACPI: Reserving NHLT table memory at [mem 0x6f1e24b0-0x6f1e24dc] ACPI: Reserving UEFI table memory at [mem 0x6f1e24e0-0x6f1e2521] ACPI: Reserving LPIT table memory at [mem 0x6f1e2528-0x6f1e25bb] ACPI: Reserving SSDT table memory at [mem 0x6f1e25c0-0x6f1e31ea] ACPI: Reserving SSDT table memory at [mem 0x6f1e31f0-0x6f1e46d1] ACPI: Reserving DBGP table memory at [mem 0x6f1e46d8-0x6f1e470b] ACPI: Reserving DBG2 table memory at [mem 0x6f1e4710-0x6f1e4763] ACPI: Reserving SSDT table memory at [mem 0x6f1e4768-0x6f1e4f44] ACPI: Reserving SSDT table memory at [mem 0x6f1e4f48-0x6f1e990f] ACPI: Reserving MSDM table memory at [mem 0x6f1e9910-0x6f1e9964] ACPI: Reserving SLIC table memory at [mem 0x6f1e9968-0x6f1e9add] ACPI: Reserving DMAR table memory at [mem 0x6f1e9ae0-0x6f1e9b87] ACPI: Reserving SSDT table memory at [mem 0x6f1e9b88-0x6f1e9ccb] ACPI: Reserving SSDT table memory at [mem 0x6f1e9cd0-0x6f1ea287] ACPI: Reserving UEFI table memory at [mem 0x6f1ea288-0x6f1ea8c1] ACPI: Reserving UEFI table memory at [mem 0x6f1ea8c8-0x6f1ea923] ACPI: Reserving SSDT table memory at [mem 0x6f1ea928-0x6f1ec91a] ACPI: Reserving BGRT table memory at [mem 0x6f1ec920-0x6f1ec957] No NUMA configuration found [ 0.008027] Faking a node at [mem 0x0000000000000000-0x000000047f7fffff] NODE_DATA(0) allocated [mem 0x47f7d5000-0x47f7fffff] Zone ranges: [ 0.039527] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000047f7fffff] Device empty [ 0.039532] Movable zone start for each node [ 0.039534] Early memory node ranges [ 0.039534] node 0: [mem 0x0000000000001000-0x000000000005dfff] node 0: [mem 0x000000000005f000-0x000000000009ffff] node 0: [mem 0x0000000000100000-0x000000003fffffff] node 0: [mem 0x0000000040400000-0x0000000065e27fff] node 0: [mem 0x0000000065e2a000-0x000000006eb71fff] node 0: [mem 0x000000006fffe000-0x000000006fffefff] node 0: [mem 0x0000000078000000-0x00000000781fffff] node 0: [mem 0x0000000100000000-0x000000047f7fffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000047f7fffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.039546] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.039564] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.042503] On node 0, zone DMA32: 1024 pages in unavailable ranges [ 0.042780] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.042836] On node 0, zone DMA32: 5260 pages in unavailable ranges [ 0.042841] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.070847] On node 0, zone Normal: 32256 pages in unavailable ranges [ 0.070868] On node 0, zone Normal: 2048 pages in unavailable ranges [ 0.070882] Reserving Intel graphics memory at [mem 0x7a800000-0x7e7fffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.071174] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.071176] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.071180] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.071180] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.071181] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.071182] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.071183] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.071183] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.071229] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.071231] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.071232] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.071235] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.071236] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.071242] e820: update [mem 0x69c69000-0x69cf1fff] usable ==> reserved [ 0.071254] TSC deadline timer available [ 0.071255] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.071275] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0005e000-0x0005efff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff] PM: hibernation: Registered nosave memory: [mem 0x60f03000-0x60f03fff] PM: hibernation: Registered nosave memory: [mem 0x60f2f000-0x60f2ffff] PM: hibernation: Registered nosave memory: [mem 0x60f30000-0x60f30fff] PM: hibernation: Registered nosave memory: [mem 0x60f4d000-0x60f4dfff] PM: hibernation: Registered nosave memory: [mem 0x60f4e000-0x60f4efff] PM: hibernation: Registered nosave memory: [mem 0x60f5e000-0x60f5efff] PM: hibernation: Registered nosave memory: [mem 0x65e28000-0x65e28fff] PM: hibernation: Registered nosave memory: [mem 0x65e29000-0x65e29fff] PM: hibernation: Registered nosave memory: [mem 0x69c69000-0x69cf1fff] PM: hibernation: Registered nosave memory: [mem 0x6eb72000-0x6f17dfff] PM: hibernation: Registered nosave memory: [mem 0x6f17e000-0x6f1fafff] PM: hibernation: Registered nosave memory: [mem 0x6f1fb000-0x6f6c1fff] PM: hibernation: Registered nosave memory: [mem 0x6f6c2000-0x6fffdfff] PM: hibernation: Registered nosave memory: [mem 0x6ffff000-0x77ffffff] PM: hibernation: Registered nosave memory: [mem 0x78200000-0x7e7fffff] PM: hibernation: Registered nosave memory: [mem 0x7e800000-0xdfffffff] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0x7e800000-0xdfffffff] available for PCI devices [ 0.071306] Booting paravirtualized kernel on bare hardware [ 0.071308] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.076009] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.076179] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144 [ 0.076186] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152 [ 0.076188] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.076215] Fallback order for Node 0: 0 [ 0.076217] Built 1 zonelists, mobility grouping on. Total pages: 4056299 [ 0.076218] Policy zone: Normal [ 0.076219] Kernel command line: BOOT_IMAGE=(hd1,gpt5)/boot/vmlinuz-6.0.15-200.fc36.x86_64 root=UUID=HASH_B5C-4FE7-82FE-08A8-16D421BEEF74 ro rhgb quiet [ 0.076277] Unknown kernel command line parameters "rhgb BOOT_IMAGE=(hd1,gpt5)/boot/vmlinuz-6.0.15-200.fc36.x86_64", will be passed to user space. [ 0.077119] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.077562] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.077731] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.077744] software IO TLB: area num 8. [ 0.124594] Memory: 15992772K/16483388K available (16393K kernel code, 3227K rwdata, 12792K rodata, 3008K init, 4696K bss, 490356K reserved, 0K cma-reserved) [ 0.124687] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.124698] ftrace: allocating 50894 entries in 199 pages [ 0.132520] ftrace: allocated 199 pages with 5 groups [ 0.133266] Dynamic Preempt: voluntary [ 0.133291] rcu: Preemptible hierarchical RCU implementation. [ 0.133291] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.133292] Trampoline variant of Tasks RCU enabled. [ 0.133293] Rude variant of Tasks RCU enabled. [ 0.133293] Tracing variant of Tasks RCU enabled. [ 0.133294] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.133294] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.136965] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.137214] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.137466] kfence: initialized - using 2097152 bytes for 255 objects at 0x00000000b9108a0b-0x00000000c2aed919 [ 0.137513] Console: colour dummy device 80x25 [ 0.137533] printk: console [tty0] enabled [ 0.137549] ACPI: Core revision 20220331 [ 0.137770] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.137771] APIC: Switch to symmetric I/O mode setup [ 0.137773] DMAR: Host address width 39 [ 0.137774] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.137779] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.137781] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.137785] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.137786] DMAR: RMRR base: 0x0000006f0db000 end: 0x0000006f0fafff [ 0.137788] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007e7fffff [ 0.137790] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.137791] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.137792] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.140223] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.140224] x2apic enabled [ 0.140248] Switched APIC routing to cluster x2apic. [ 0.145913] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns [ 0.145918] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=1800000) [ 0.145921] pid_max: default: 32768 minimum: 301 [ 0.146916] LSM: Security Framework initializing [ 0.146916] Yama: becoming mindful. [ 0.146916] SELinux: Initializing. [ 0.146916] LSM support for eBPF active [ 0.146916] landlock: Up and running. [ 0.146916] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.146916] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.146916] CPU0: Thermal monitoring enabled (TM1) [ 0.146916] process: using mwait in idle threads [ 0.146916] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.146916] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.146916] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.146916] Spectre V2 : Mitigation: Enhanced IBRS [ 0.146916] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.146916] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 0.146916] RETBleed: Mitigation: Enhanced IBRS [ 0.146916] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.146916] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.146916] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.146916] SRBDS: Mitigation: Microcode [ 0.146916] Freeing SMP alternatives memory: 44K [ 0.146916] smpboot: CPU0: Intel(R) Core(TM) i5-8265U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xc) [ 0.146916] cblist_init_generic: Setting adjustable number of callback queues. [ 0.146916] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.146916] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.146916] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.146916] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.146916] ... version: 4 [ 0.146916] ... bit width: 48 [ 0.146916] ... generic registers: 4 [ 0.146916] ... value mask: 0000ffffffffffff [ 0.146916] ... max period: 00007fffffffffff [ 0.146916] ... fixed-purpose events: 3 [ 0.146916] ... event mask: 000000070000000f [ 0.146916] Estimated ratio of average max frequency by base frequency (times 1024): 2104 [ 0.146916] rcu: Hierarchical SRCU implementation. [ 0.146916] rcu: Max phase no-delay instances is 400. [ 0.146916] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.146916] smp: Bringing up secondary CPUs ... [ 0.146916] x86: Booting SMP configuration: [ 0.146916] .... node #0, CPUs: #1 #2 #3 #4 [ 0.148365] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.148365] #5 #6 #7 [ 0.149923] smp: Brought up 1 node, 8 CPUs [ 0.149926] smpboot: Max logical packages: 1 [ 0.149927] smpboot: Total of 8 processors activated (28800.00 BogoMIPS) [ 0.151348] devtmpfs: initialized [ 0.151348] x86/mm: Memory block size: 128MB [ 0.152235] ACPI: PM: Registering ACPI NVS region [mem 0x65e28000-0x65e28fff] (4096 bytes) [ 0.152235] ACPI: PM: Registering ACPI NVS region [mem 0x6f1fb000-0x6f6c1fff] (5009408 bytes) [ 0.152235] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.152235] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.152235] pinctrl core: initialized pinctrl subsystem [ 0.152331] PM: RTC time: 10:47:31, date: 2022-12-31 [ 0.152927] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.153004] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.153009] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.153013] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.153024] thermal_sys: Registered thermal governor 'fair_share' [ 0.153024] thermal_sys: Registered thermal governor 'bang_bang' [ 0.153024] thermal_sys: Registered thermal governor 'step_wise' [ 0.153024] thermal_sys: Registered thermal governor 'user_space' [ 0.153024] cpuidle: using governor menu [ 0.153024] Simple Boot Flag at 0x47 set to 0x80 [ 0.153024] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.153024] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.153047] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.153050] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.153062] PCI: Using configuration type 1 for base access [ 0.153217] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.154634] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.159936] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.159936] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.159936] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.159936] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.159948] cryptd: max_cpu_qlen set to 1000 [ 0.159965] raid6: skipped pq benchmark and selected avx2x4 [ 0.159965] raid6: using avx2x2 recovery algorithm [ 0.159968] ACPI: Added _OSI(Module Device) [ 0.159969] ACPI: Added _OSI(Processor Device) [ 0.159969] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.159970] ACPI: Added _OSI(Processor Aggregator Device) [ 0.159971] ACPI: Added _OSI(Linux-Dell-Video) [ 0.159972] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.159972] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.204877] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.208252] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.213308] ACPI: Dynamic OEM Table Load: [ 0.213308] ACPI: SSDT 0xFFFF9954015F9C00 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527) [ 0.214335] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.215418] ACPI: Dynamic OEM Table Load: [ 0.215423] ACPI: SSDT 0xFFFF995400E60000 000434 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.216180] ACPI: Dynamic OEM Table Load: [ 0.216184] ACPI: SSDT 0xFFFF995400E61000 0004FD (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.216973] ACPI: Dynamic OEM Table Load: [ 0.216976] ACPI: SSDT 0xFFFF9954015BE600 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 0.217653] ACPI: Dynamic OEM Table Load: [ 0.217657] ACPI: SSDT 0xFFFF995400E63000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 0.218520] ACPI: Dynamic OEM Table Load: [ 0.218525] ACPI: SSDT 0xFFFF995400E61800 0005FC (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.219312] ACPI: Dynamic OEM Table Load: [ 0.219316] ACPI: SSDT 0xFFFF995400E55400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.220104] ACPI: Dynamic OEM Table Load: [ 0.220109] ACPI: SSDT 0xFFFF995400E5D000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527) [ 0.221207] ACPI: Dynamic OEM Table Load: [ 0.221211] ACPI: SSDT 0xFFFF995400E57400 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.224225] ACPI: EC: EC started [ 0.224226] ACPI: EC: interrupt blocked [ 0.228916] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.228916] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.228916] ACPI: Interpreter enabled [ 0.228916] ACPI: PM: (supports S0 S3 S4 S5) [ 0.228916] ACPI: Using IOAPIC for interrupt routing [ 0.228916] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.228916] PCI: Using E820 reservations for host bridge windows [ 0.228916] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.234127] ACPI: PM: Power Resource [PC05] ACPI: PM: Power Resource [USBC] ACPI: PM: Power Resource [V0PR] ACPI: PM: Power Resource [V1PR] ACPI: PM: Power Resource [V2PR] ACPI: PM: Power Resource [WRST] ACPI: PM: Power Resource [PIN] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.254739] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.257827] PCI host bridge to bus 0000:00 [ 0.257829] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x7e800000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000 [ 0.257987] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000 [ 0.257995] pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.258020] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.258168] pci 0000:00:04.0: reg 0x10: [mem 0xa4398000-0xa439ffff 64bit] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.258380] pci 0000:00:08.0: reg 0x10: [mem 0xa43b1000-0xa43b1fff 64bit] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000 [ 0.258510] pci 0000:00:12.0: reg 0x10: [mem 0xa43b0000-0xa43b0fff 64bit] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330 [ 0.258664] pci 0000:00:14.0: reg 0x10: [mem 0xa4380000-0xa438ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.260056] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000 [ 0.260073] pci 0000:00:14.2: reg 0x10: [mem 0xa43a8000-0xa43a9fff 64bit] pci 0000:00:14.2: reg 0x18: [mem 0xa43af000-0xa43affff 64bit] pci 0000:00:14.3: [8086:9df0] type 00 class 0x028000 [ 0.260209] pci 0000:00:14.3: reg 0x10: [mem 0xa43a4000-0xa43a7fff 64bit] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.260553] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000 [ 0.260635] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] pci 0000:00:15.1: [8086:9de9] type 00 class 0x0c8000 [ 0.261206] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000 [ 0.261686] pci 0000:00:16.0: reg 0x10: [mem 0xa43ac000-0xa43acfff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.262081] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400 [ 0.262094] pci 0000:00:17.0: reg 0x10: [mem 0xa4390000-0xa4397fff] pci 0000:00:17.0: reg 0x14: [mem 0xa43ab000-0xa43ab0ff] pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097] pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f] pci 0000:00:17.0: reg 0x24: [mem 0xa4300000-0xa437ffff] pci 0000:00:17.0: PME# supported from D3hot [ 0.262416] pci 0000:00:1c.0: [8086:9db8] type 01 class 0x060400 [ 0.262484] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.262901] pci 0000:00:1c.4: [8086:9dbc] type 01 class 0x060400 [ 0.262973] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.262997] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity [ 0.263415] pci 0000:00:1d.0: [8086:9db0] type 01 class 0x060400 [ 0.263486] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.263510] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity [ 0.263942] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100 [ 0.264197] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040380 [ 0.264227] pci 0000:00:1f.3: reg 0x10: [mem 0xa43a0000-0xa43a3fff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0xa4100000-0xa41fffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.266941] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500 [ 0.266966] pci 0000:00:1f.4: reg 0x10: [mem 0xa43aa000-0xa43aa0ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000 [ 0.267202] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] acpiphp: Slot [1] registered [ 0.267346] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:02:00.0: [10de:1d13] type 00 class 0x030200 [ 0.267413] pci 0000:02:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff] pci 0000:02:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref] pci 0000:02:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref] pci 0000:02:00.0: reg 0x24: [io 0x4000-0x407f] pci 0000:02:00.0: reg 0x30: [mem 0xa4000000-0xa407ffff pref] pci 0000:02:00.0: Enabling HDA controller [ 0.267779] pci 0000:00:1c.4: PCI bridge to [bus 02] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.4: bridge window [mem 0xa3000000-0xa40fffff] pci 0000:00:1c.4: bridge window [mem 0x90000000-0xa1ffffff 64bit pref] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000 [ 0.267870] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff] pci 0000:03:00.0: reg 0x18: [mem 0xa4204000-0xa4204fff 64bit] pci 0000:03:00.0: reg 0x20: [mem 0xa4200000-0xa4203fff 64bit] pci 0000:03:00.0: supports D1 D2 [ 0.268010] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.268172] pci 0000:00:1d.0: PCI bridge to [bus 03] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1d.0: bridge window [mem 0xa4200000-0xa42fffff] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.269735] ACPI: PCI: Interrupt link LNKB configured for IRQ 1 [ 0.269791] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.269847] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.269903] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.269961] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.270017] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.270073] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.276160] Low-power S0 idle used by default for system suspend [ 0.283740] ACPI: EC: interrupt unblocked [ 0.283741] ACPI: EC: event unblocked [ 0.283749] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.283750] ACPI: EC: GPE=0x6e [ 0.283751] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete [ 0.283752] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events [ 0.283818] iommu: Default domain type: Translated [ 0.283818] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.283923] SCSI subsystem initialized [ 0.283933] libata version 3.00 loaded. [ 0.283935] ACPI: bus type USB registered [ 0.283946] usbcore: registered new interface driver usbfs [ 0.283950] usbcore: registered new interface driver hub [ 0.283955] usbcore: registered new device driver usb [ 0.283974] pps_core: LinuxPPS API ver. 1 registered [ 0.283975] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.283976] PTP clock support registered [ 0.283985] EDAC MC: Ver: 3.0.0 [ 0.284210] Registered efivars operations [ 0.284210] NetLabel: Initializing [ 0.284210] NetLabel: domain hash size = 128 [ 0.284210] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.284210] NetLabel: unlabeled traffic allowed by default [ 0.284210] mctp: management component transport protocol core [ 0.284210] NET: Registered PF_MCTP protocol family [ 0.284210] PCI: Using ACPI for IRQ routing [ 0.331366] PCI: pci_cache_line_size set to 64 bytes [ 0.331516] e820: reserve RAM buffer [mem 0x0005e000-0x0005ffff] e820: reserve RAM buffer [mem 0x60f03018-0x63ffffff] e820: reserve RAM buffer [mem 0x60f30018-0x63ffffff] e820: reserve RAM buffer [mem 0x60f4e018-0x63ffffff] e820: reserve RAM buffer [mem 0x65e28000-0x67ffffff] e820: reserve RAM buffer [mem 0x69c69000-0x6bffffff] e820: reserve RAM buffer [mem 0x6eb72000-0x6fffffff] e820: reserve RAM buffer [mem 0x6ffff000-0x6fffffff] e820: reserve RAM buffer [mem 0x78200000-0x7bffffff] e820: reserve RAM buffer [mem 0x47f800000-0x47fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.331532] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.331532] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.331532] vgaarb: loaded [ 0.331916] clocksource: Switched to clocksource tsc-early [ 0.331923] VFS: Disk quotas dquot_6.6.0 [ 0.331923] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.331923] pnp: PnP ACPI init [ 0.331923] system 00:00: [mem 0x40000000-0x403fffff] has been reserved [ 0.332264] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.332266] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.332347] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.332575] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.332577] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.332578] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.332580] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.332581] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.332582] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.332583] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.332584] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.332747] system 00:06: [io 0x1800-0x18fe] could not be reserved [ 0.332749] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved [ 0.332750] system 00:06: [mem 0xfd6b0000-0xfd6cffff] has been reserved [ 0.332751] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.332752] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.332753] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.332755] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.332976] system 00:07: [io 0x2000-0x20fe] has been reserved [ 0.336656] pnp: PnP ACPI: found 9 devices [ 0.341977] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.342058] NET: Registered PF_INET protocol family [ 0.342188] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.344328] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.344347] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.344357] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.344485] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.344603] TCP: Hash tables configured (established 131072 bind 65536) [ 0.344668] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.344696] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.344722] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.344770] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.344774] NET: Registered PF_XDP protocol family [ 0.344785] clipped [mem size 0x00020000 64bit] to [mem size 0xfffffffffffc0000 64bit] for e820 entry [mem 0x000a0000-0x000fffff] pci 0000:00:15.0: BAR 0: assigned [mem 0x7e800000-0x7e800fff 64bit] clipped [mem size 0x00020000 64bit] to [mem size 0xfffffffffffc0000 64bit] for e820 entry [mem 0x000a0000-0x000fffff] pci 0000:00:15.1: BAR 0: assigned [mem 0x7e801000-0x7e801fff 64bit] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.4: PCI bridge to [bus 02] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.4: bridge window [mem 0xa3000000-0xa40fffff] pci 0000:00:1c.4: bridge window [mem 0x90000000-0xa1ffffff 64bit pref] pci 0000:00:1d.0: PCI bridge to [bus 03] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1d.0: bridge window [mem 0xa4200000-0xa42fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x7e800000-0xdfffffff window] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] pci_bus 0000:02: resource 1 [mem 0xa3000000-0xa40fffff] pci_bus 0000:02: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] pci_bus 0000:03: resource 1 [mem 0xa4200000-0xa42fffff] PCI: CLS 64 bytes, default 64 [ 0.345417] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.345418] software IO TLB: mapped [mem 0x000000006a0a6000-0x000000006e0a6000] (64MB) [ 0.345440] Trying to unpack rootfs image as initramfs... [ 0.345472] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.345485] sgx: EPC section 0x70200000-0x75f7ffff [ 0.346468] Initialise system trusted keyrings [ 0.346475] Key type blacklist registered [ 0.346507] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.347609] zbud: loaded [ 0.348083] integrity: Platform Keyring initialized [ 0.348087] integrity: Machine keyring initialized [ 0.354154] NET: Registered PF_ALG protocol family [ 0.354156] xor: automatically using best checksumming function avx [ 0.354157] Key type asymmetric registered [ 0.354158] Asymmetric key parser 'x509' registered [ 0.676116] Freeing initrd memory: 36688K [ 0.678718] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.678736] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.678757] io scheduler mq-deadline registered [ 0.678759] io scheduler kyber registered [ 0.678783] io scheduler bfq registered [ 0.679966] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.680262] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.680504] pcieport 0000:00:1c.4: PME: Signaling with IRQ 123 [ 0.680540] pcieport 0000:00:1c.4: AER: enabled with IRQ 123 [ 0.680569] pcieport 0000:00:1c.4: DPC: enabled with IRQ 123 [ 0.680570] pcieport 0000:00:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+ [ 0.680739] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124 [ 0.680775] pcieport 0000:00:1d.0: AER: enabled with IRQ 124 [ 0.680813] pcieport 0000:00:1d.0: DPC: enabled with IRQ 124 [ 0.680815] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+ [ 0.680890] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.683526] ACPI: AC: AC Adapter [AC] (on-line) [ 0.683625] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.683669] ACPI: button: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.683742] ACPI: button: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.683797] ACPI: button: Sleep Button [SBTN] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.687446] ACPI: thermal: Thermal Zone [THM] (25 C) [ 0.687845] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.690720] hpet_acpi_add: no address or irqs in _CRS [ 0.690773] Non-volatile memory driver v1.3 [ 0.690778] Linux agpgart interface v0.103 [ 0.691066] ACPI: bus type drm_connector registered [ 0.693552] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 0.722850] ACPI: battery: Slot [BAT0] (battery present) [ 0.727698] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) [ 0.734861] ahci 0000:00:17.0: version 3.0 [ 0.735027] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 0.745122] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x5 impl RAID mode [ 0.745127] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm clo only pio slum part deso sadm sds apst [ 0.745591] scsi host0: ahci [ 0.745893] scsi host1: ahci [ 0.746174] scsi host2: ahci [ 0.746200] ata1: SATA max UDMA/133 abar m524288@0xa4300000 port 0xa4300100 irq 125 [ 0.746201] ata2: DUMMY [ 0.746202] ata3: SATA max UDMA/133 abar m524288@0xa4300000 port 0xa4300200 irq 125 [ 0.746470] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.746473] ehci-pci: EHCI PCI platform driver [ 0.746482] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.746487] ohci-pci: OHCI PCI platform driver [ 0.746507] uhci_hcd: USB Universal Host Controller Interface driver [ 0.746694] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.746752] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.747823] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 0.748041] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.748096] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.748098] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 0.748137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00 [ 0.748139] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.748140] usb usb1: Product: xHCI Host Controller [ 0.748141] usb usb1: Manufacturer: Linux 6.0.15-200.fc36.x86_64 xhci-hcd [ 0.748142] usb usb1: SerialNumber: ... [ 0.748269] hub 1-0:1.0: USB hub found [ 0.748284] hub 1-0:1.0: 12 ports detected [ 0.749570] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.00 [ 0.749572] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.749573] usb usb2: Product: xHCI Host Controller [ 0.749574] usb usb2: Manufacturer: Linux 6.0.15-200.fc36.x86_64 xhci-hcd [ 0.749575] usb usb2: SerialNumber: ... [ 0.749666] hub 2-0:1.0: USB hub found [ 0.749677] hub 2-0:1.0: 6 ports detected [ 0.750582] usbcore: registered new interface driver usbserial_generic [ 0.750585] usbserial: USB Serial support registered for generic [ 0.750610] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.750918] i8042: Warning: Keylock active [ 0.752597] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.752600] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.752692] mousedev: PS/2 mouse device common for all mice [ 0.752856] rtc_cmos rtc_cmos: RTC can wake from S4 [ 0.754261] rtc_cmos rtc_cmos: registered as rtc0 [ 0.754350] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.754555] rtc_cmos rtc_cmos: setting system clock to 2022-12-31T10:47:31 UTC (1672483651) [ 0.754564] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 0.754871] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.754884] device-mapper: uevent: version 1.0.3 [ 0.754932] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: XXX@XXX [ 0.755064] intel_pstate: Intel P-state driver initializing [ 0.755503] intel_pstate: HWP enabled [ 0.755797] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 [ 0.756372] fbcon: Deferring console take-over [ 0.756375] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device [ 0.756414] hid: raw HID events driver (C) Jiri Kosina [ 0.756440] usbcore: registered new interface driver usbhid [ 0.756441] usbhid: USB HID core driver [ 0.756489] intel_pmc_core INT33A1:00: initialized [ 0.756612] drop_monitor: Initializing network drop monitor service [ 0.766316] Initializing XFRM netlink socket [ 0.766405] NET: Registered PF_INET6 protocol family [ 0.770119] Segment Routing with IPv6 [ 0.770121] RPL Segment Routing with IPv6 [ 0.770127] In-situ OAM (IOAM) with IPv6 [ 0.770142] mip6: Mobile IPv6 [ 0.770143] NET: Registered PF_PACKET protocol family [ 0.770969] microcode: sig=0x806ec, pf=0x80, revision=0xf0 [ 0.771152] microcode: Microcode Update Driver: v2.2. [ 0.771156] IPI shorthand broadcast: enabled [ 0.771161] AVX2 version of gcm_enc/dec engaged. [ 0.771524] AES CTR mode by8 optimization enabled [ 0.771697] sched_clock: Marking stable (763149745, 8534461)->(794334154, -22649948) [ 0.771886] registered taskstats version 1 [ 0.772177] Loading compiled-in X.509 certificates [ 0.779696] Loaded X.509 cert 'Fedora kernel signing key: 17284ceb84b49aa2fa95500e62fd83ea78cfec1c' [ 0.780026] zswap: loaded using pool lzo/zbud [ 0.780317] page_owner is disabled [ 0.780427] Key type .fscrypt registered [ 0.780429] Key type fscrypt-provisioning registered [ 0.780715] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 0.780725] Key type big_key registered [ 0.783425] Key type encrypted registered [ 0.784297] integrity: Loading X.509 certificate: UEFI:db [ 0.784314] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' [ 0.784315] integrity: Loading X.509 certificate: UEFI:db [ 0.784330] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.784331] integrity: Loading X.509 certificate: UEFI:db [ 0.784343] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.785410] ima: No TPM chip found, activating TPM-bypass! [ 0.785412] Loading compiled-in module X.509 certificates [ 0.785792] Loaded X.509 cert 'Fedora kernel signing key: 17284ceb84b49aa2fa95500e62fd83ea78cfec1c' [ 0.785794] ima: Allocated hash algorithm: sha256 [ 0.785801] ima: No architecture policies found [ 0.785811] evm: Initialising EVM extended attributes: [ 0.785812] evm: security.selinux [ 0.785813] evm: security.SMACK64 (disabled) [ 0.785813] evm: security.SMACK64EXEC (disabled) [ 0.785814] evm: security.SMACK64TRANSMUTE (disabled) [ 0.785814] evm: security.SMACK64MMAP (disabled) [ 0.785815] evm: security.apparmor (disabled) [ 0.785815] evm: security.ima [ 0.785816] evm: security.capability [ 0.785816] evm: HMAC attrs: 0x1 [ 0.820301] alg: No test for 842 (842-scomp) [ 0.820318] alg: No test for 842 (842-generic) [ 0.907351] PM: Magic number: 2:663:781 [ 0.907365] dma_heap system: hash matches [ 0.907468] RAS: Correctable Errors collector initialized. [ 0.987113] usb 1-5: new full-speed USB device number 2 using xhci_hcd [ 1.056662] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.057422] ata1.00: ATA-10: WDC WD10SPZX-75Z10T2, 03.01A03, max UDMA/133 [ 1.059027] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.059036] ata1.00: Features: NCQ-prio [ 1.062513] ata1.00: configured for UDMA/133 [ 1.062792] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPZX-75Z 1A03 PQ: 0 ANSI: 5 [ 1.063900] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.064106] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.064111] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.064205] sd 0:0:0:0: [sda] Write Protect is off [ 1.064211] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.064261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.064430] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 1.117355] usb 1-5: New USB device found, idVendor=27c6, idProduct=538c, bcdDevice= 1.00 [ 1.117364] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.117368] usb 1-5: Product: FingerPrint [ 1.117370] usb 1-5: Manufacturer: Goodix [ 1.216054] sda: sda1 sda2 sda3 [ 1.216683] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.232997] usb 1-6: new high-speed USB device number 3 using xhci_hcd [ 1.376625] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.378320] ata3.00: ATA-10: SK hynix SC311 SATA 256GB, 70000P10, max UDMA/133 [ 1.378430] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.379514] ata3.00: Features: Dev-Sleep [ 1.381758] ata3.00: configured for UDMA/133 [ 1.382118] scsi 2:0:0:0: Direct-Access ATA SK hynix SC311 S 0P10 PQ: 0 ANSI: 5 [ 1.383222] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.383425] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 1.383431] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 1.383503] sd 2:0:0:0: [sdb] Write Protect is off [ 1.383510] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.383653] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.383861] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 1.385269] usb 1-6: New USB device found, idVendor=0bda, idProduct=5678, bcdDevice=93.12 [ 1.385277] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 1.385281] usb 1-6: Product: Integrated_Webcam_HD [ 1.385283] usb 1-6: Manufacturer: Integrated_Webcam_HD [ 1.385286] usb 1-6: SerialNumber: ... [ 1.393488] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 [ 1.393884] tsc: Refined TSC clocksource calibration: 1800.002 MHz [ 1.393909] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f22b76be8, max_idle_ns: 440795216487 ns [ 1.393974] clocksource: Switched to clocksource tsc [ 1.394199] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.396101] Freeing unused decrypted memory: 2036K [ 1.397052] Freeing unused kernel image (initmem) memory: 3008K [ 1.399999] Write protecting the kernel read-only data: 32768k [ 1.401088] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.401680] Freeing unused kernel image (rodata/data gap) memory: 1544K [ 1.414767] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.414771] rodata_test: all tests were successful [ 1.414774] Run /init as init process [ 1.414775] with arguments: [ 1.414776] /init [ 1.414776] rhgb [ 1.414777] with environment: [ 1.414778] HOME=/ [ 1.414778] TERM=linux [ 1.414778] BOOT_IMAGE=(hd1,gpt5)/boot/vmlinuz-6.0.15-200.fc36.x86_64 [ 1.501951] usb 1-10: new full-speed USB device number 4 using xhci_hcd [ 1.534798] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4648] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..] psmouse serio1: synaptics: Your touchpad (PNP: DLL089d PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to XXX@XXX. [ 1.618708] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.16, id: 0x1e2a1, caps: 0xf00123/0x840300/0x12e800/0x500000, board id: 3240, fw id: 2749858 [ 1.631087] usb 1-10: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02 [ 1.631092] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.655854] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.043818] fuse: init (API version 7.36) [ 2.451169] acpi PNP0C14:03: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:02) [ 2.451242] wmi_bus wmi_bus-PNP0C14:04: WQBC data block query control method not found [ 2.451245] acpi PNP0C14:04: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:02) [ 2.453008] acpi PNP0C14:05: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:02) [ 2.458488] acpi PNP0C14:06: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:02) [ 2.506746] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.515861] r8169 0000:03:00.0 eth0: RTL8107e, C4AB669A79233DBD27EE76205AB32A7D, XID 541, IRQ 127 [ 2.622092] input: DELL089D:00 06CB:CCA8 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL089D:00/0018:06CB:CCA8.0001/input/input6 [ 2.622482] input: DELL089D:00 06CB:CCA8 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL089D:00/0018:06CB:CCA8.0001/input/input7 [ 2.622823] hid-generic 0018:06CB:CCA8.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL089D:00 06CB:CCA8] on i2c-DELL089D:00 [ 2.634864] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 2.711624] input: DELL089D:00 06CB:CCA8 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL089D:00/0018:06CB:CCA8.0001/input/input9 [ 2.711703] input: DELL089D:00 06CB:CCA8 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL089D:00/0018:06CB:CCA8.0001/input/input10 [ 2.711773] hid-multitouch 0018:06CB:CCA8.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL089D:00 06CB:CCA8] on i2c-DELL089D:00 [ 2.963384] MXM: GUID detected in BIOS [ 2.963406] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20220331/nsarguments-61) [ 2.963448] ACPI Warning: \_SB.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20220331/nsarguments-61) [ 2.964218] pci 0000:02:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported [ 2.964221] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP05.PEGP handle [ 2.964222] nouveau: detected PR support, will not use DSM [ 2.964249] nouveau 0000:02:00.0: enabling device (0006 -> 0007) [ 3.230241] i915 0000:00:02.0: vgaarb: deactivate vga console [ 3.230265] nouveau 0000:02:00.0: NVIDIA GP108 (138000a1) [ 3.247350] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.248489] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 3.271524] nouveau 0000:02:00.0: bios: version 86.08.2d.00.77 [ 3.273578] nouveau 0000:02:00.0: pmu: firmware unavailable [ 3.307251] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it [ 3.308628] i915 0000:00:02.0: [drm] [ENCODER:111:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it [ 3.360931] nouveau 0000:02:00.0: fb: 2048 MiB GDDR5 [ 3.361096] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1 [ 3.395880] nouveau 0000:02:00.0: DRM: VRAM: 2048 MiB [ 3.395883] nouveau 0000:02:00.0: DRM: GART: 536870912 MiB [ 3.395885] nouveau 0000:02:00.0: DRM: BIT table 'A' not found [ 3.395886] nouveau 0000:02:00.0: DRM: BIT table 'L' not found [ 3.395887] nouveau 0000:02:00.0: DRM: Pointer to TMDS table not found [ 3.395888] nouveau 0000:02:00.0: DRM: DCB version 4.1 [ 3.402185] nouveau 0000:02:00.0: DRM: MM: using COPY for buffer copies [ 3.402382] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0 [ 3.407855] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.408803] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 3.409230] ACPI: video: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 3.409256] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:01/input/input13 [ 3.409441] vga_switcheroo: enabled [ 3.431380] fbcon: i915drmfb (fb0) is primary device [ 3.431382] fbcon: Deferring console take-over [ 3.431384] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 3.532135] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Quota mode: none. [ 4.964371] zram: Added device: zram0 [ 5.335438] EXT4-fs (sdb5): re-mounted. Quota mode: none. [ 5.834318] Consider using thermal netlink events interface [ 5.841840] input: Intel HID events as /devices/platform/INT33D5:00/input/input14 [ 5.842344] intel-hid INT33D5:00: platform supports 5 button array [ 5.842384] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input15 [ 5.909813] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 5.910313] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 6.022806] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 6.022875] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 6.029158] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 6.031924] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 6.037958] intel_rapl_common: Found RAPL domain package [ 6.037962] intel_rapl_common: Found RAPL domain dram [ 6.039298] mc: Linux media interface: v0.10 [ 6.051352] i2c i2c-14: 2/2 memory slots populated (from DMI) [ 6.051887] i2c i2c-14: Successfully instantiated SPD at 0x50 [ 6.081236] videodev: Linux video capture interface: v2.00 [ 6.110978] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.111193] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.144147] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 6.144619] Bluetooth: Core ver 2.22 [ 6.144637] NET: Registered PF_BLUETOOTH protocol family [ 6.144639] Bluetooth: HCI device and connection manager initialized [ 6.144642] Bluetooth: HCI socket layer initialized [ 6.144644] Bluetooth: L2CAP socket layer initialized [ 6.144648] Bluetooth: SCO socket layer initialized [ 6.145440] input: PC Speaker as /devices/platform/pcspkr/input/input16 [ 6.201160] input: Dell WMI hotkeys as /devices/platform/PNP0C14:04/wmi_bus/wmi_bus-PNP0C14:04/HASH_F6F-461E-5551-B932-4B79FFAD3E75/input/input17 [ 6.217626] zram0: detected capacity change from 0 to 16777216 [ 6.229386] Intel(R) Wireless WiFi driver for Linux [ 6.229474] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) [ 6.264723] iTCO_vendor_support: vendor-support=0 [ 6.265634] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 6.266333] intel_rapl_common: Found RAPL domain package [ 6.266335] intel_rapl_common: Found RAPL domain core [ 6.266336] intel_rapl_common: Found RAPL domain uncore [ 6.266337] intel_rapl_common: Found RAPL domain dram [ 6.266338] intel_rapl_common: Found RAPL domain psys [ 6.267118] usb 1-6: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5678) [ 6.273244] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input18 [ 6.274167] ee1004 14-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.274180] usbcore: registered new interface driver uvcvideo [ 6.281324] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 6.282356] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.282494] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 6.282497] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.282498] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.282499] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 6.282500] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 6.282501] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 6.285722] iwlwifi 0000:00:14.3: WRT: Overriding region id 0 [ 6.285727] iwlwifi 0000:00:14.3: WRT: Overriding region id 1 [ 6.285729] iwlwifi 0000:00:14.3: WRT: Overriding region id 2 [ 6.285730] iwlwifi 0000:00:14.3: WRT: Overriding region id 3 [ 6.285732] iwlwifi 0000:00:14.3: WRT: Overriding region id 4 [ 6.285733] iwlwifi 0000:00:14.3: WRT: Overriding region id 6 [ 6.285735] iwlwifi 0000:00:14.3: WRT: Overriding region id 8 [ 6.285736] iwlwifi 0000:00:14.3: WRT: Overriding region id 9 [ 6.285737] iwlwifi 0000:00:14.3: WRT: Overriding region id 10 [ 6.285739] iwlwifi 0000:00:14.3: WRT: Overriding region id 11 [ 6.285740] iwlwifi 0000:00:14.3: WRT: Overriding region id 15 [ 6.285742] iwlwifi 0000:00:14.3: WRT: Overriding region id 16 [ 6.285743] iwlwifi 0000:00:14.3: WRT: Overriding region id 18 [ 6.285745] iwlwifi 0000:00:14.3: WRT: Overriding region id 19 [ 6.285746] iwlwifi 0000:00:14.3: WRT: Overriding region id 20 [ 6.285748] iwlwifi 0000:00:14.3: WRT: Overriding region id 21 [ 6.285749] iwlwifi 0000:00:14.3: WRT: Overriding region id 28 [ 6.286055] iwlwifi 0000:00:14.3: loaded firmware version 46.50fdb42f.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm [ 6.357770] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDscFS [ 6.399173] usbcore: registered new interface driver btusb [ 6.399712] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015 [ 6.400715] Bluetooth: hci0: Device revision is 2 [ 6.400717] Bluetooth: hci0: Secure boot is enabled [ 6.400717] Bluetooth: hci0: OTP lock is enabled [ 6.400718] Bluetooth: hci0: API lock is enabled [ 6.400718] Bluetooth: hci0: Debug lock is disabled [ 6.400719] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 6.445270] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi [ 6.445368] Bluetooth: hci0: Boot Address: 0x40800 [ 6.445369] Bluetooth: hci0: Firmware Version: 214-6.22 [ 6.473570] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 [ 6.478065] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 6.478513] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.479364] iwlwifi 0000:00:14.3: Detected Intel(R) Wireless-AC 9462, REV=0x312 [ 6.479607] thermal thermal_zone7: failed to read out thermal zone (-61) [ 6.507517] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Quota mode: none. [ 6.556734] iwlwifi 0000:00:14.3: base HW address: 88C80498EE2C5AE61BBF665A99D285D0, OTP minor version: 0x4 [ 6.599061] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 6.601604] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3204: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 6.601609] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.601611] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 6.601613] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.601615] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.601616] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 6.601618] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 6.601620] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 6.605283] intel_tcc_cooling: Programmable TCC Offset detected [ 6.636702] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0 [ 6.672220] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 6.672269] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 6.672310] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 6.672349] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 6.672390] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 [ 6.672427] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24 [ 6.755154] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none. [ 7.029754] RPC: Registered named UNIX socket transport module. [ 7.029757] RPC: Registered udp transport module. [ 7.029757] RPC: Registered tcp transport module. [ 7.029758] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.712129] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.712138] Bluetooth: BNEP filters: protocol multicast [ 7.712147] Bluetooth: BNEP socket layer initialized [ 7.985396] Bluetooth: hci0: Waiting for firmware download to complete [ 7.985706] Bluetooth: hci0: Firmware loaded in 1504329 usecs [ 7.985788] Bluetooth: hci0: Waiting for device to boot [ 7.999725] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [ 7.999757] Bluetooth: hci0: Device booted in 13672 usecs [ 8.003084] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc [ 8.004775] Bluetooth: hci0: Applying Intel DDC parameters completed [ 8.005794] Bluetooth: hci0: Firmware revision 0.1 build 214 week 6 2022 [ 8.063112] Bluetooth: MGMT ver 1.22 [ 8.793778] NET: Registered PF_QIPCRTR protocol family [ 9.599465] vboxdrv: loading out-of-tree module taints kernel. [ 9.599629] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 9.608456] vboxdrv: Found 8 processor cores/threads [ 9.624203] vboxdrv: TSC mode is Invariant, tentative frequency 1799981521 Hz [ 9.624206] vboxdrv: Successfully loaded version 7.0.4_rpmfusion r154605 (interface 0x00330004) [ 9.663335] VBoxNetFlt: Successfully started. [ 9.675525] VBoxNetAdp: Successfully started. [ 10.038994] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 10.212069] r8169 0000:03:00.0 enp3s0: Link is Down [ 10.387465] iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled) [ 10.577654] iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled) [ 14.167142] wlo1: authenticate with C6F0280A0BB54BF85F55CBBA803B34AA [ 14.172975] wlo1: bad VHT capabilities, disabling VHT [ 14.172982] wlo1: 80 MHz not supported, disabling VHT [ 14.181377] wlo1: send auth to C6F0280A0BB54BF85F55CBBA803B34AA (try 1/3) [ 14.204998] wlo1: authenticated [ 14.211956] wlo1: associate with C6F0280A0BB54BF85F55CBBA803B34AA (try 1/3) [ 14.217892] wlo1: RX AssocResp from C6F0280A0BB54BF85F55CBBA803B34AA (capab=0x1431 status=0 aid=5) [ 14.222417] wlo1: associated [ 14.308325] wlo1: Limiting TX power to 20 (20 - 0) dBm as advertised by C6F0280A0BB54BF85F55CBBA803B34AA [ 14.308384] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 17.865145] nouveau 0000:02:00.0: Enabling HDA controller [ 18.302560] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 18.308705] Bridge firewalling registered [ 19.195945] docker0: port 1(vethfa872ac) entered blocking state [ 19.195969] docker0: port 1(vethfa872ac) entered disabled state [ 19.196180] device vethfa872ac entered promiscuous mode [ 19.196917] docker0: port 1(vethfa872ac) entered blocking state [ 19.196930] docker0: port 1(vethfa872ac) entered forwarding state [ 19.197002] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [ 19.197303] docker0: port 1(vethfa872ac) entered disabled state [ 19.209705] docker0: port 2(veth1f5ee01) entered blocking state [ 19.209714] docker0: port 2(veth1f5ee01) entered disabled state [ 19.209889] device veth1f5ee01 entered promiscuous mode [ 19.210236] docker0: port 2(veth1f5ee01) entered blocking state [ 19.210241] docker0: port 2(veth1f5ee01) entered forwarding state [ 19.384949] docker0: port 2(veth1f5ee01) entered disabled state [ 19.386719] device veth1f5ee01 left promiscuous mode [ 19.386755] docker0: port 2(veth1f5ee01) entered disabled state [ 20.060597] eth0: renamed from veth295fe93 [ 20.073920] IPv6: ADDRCONF(NETDEV_CHANGE): vethfa872ac: link becomes ready [ 20.073985] docker0: port 1(vethfa872ac) entered blocking state [ 20.073993] docker0: port 1(vethfa872ac) entered forwarding state [ 20.358671] rfkill: input handler disabled [ 20.910740] Bluetooth: RFCOMM TTY layer initialized [ 20.910750] Bluetooth: RFCOMM socket layer initialized [ 20.910755] Bluetooth: RFCOMM ver 1.11 [ 34.242115] rfkill: input handler enabled [ 34.530638] nouveau 0000:02:00.0: Enabling HDA controller [ 43.610472] rfkill: input handler disabled [ 48.378517] nouveau 0000:02:00.0: Enabling HDA controller [ 64.635080] nouveau 0000:02:00.0: Enabling HDA controller [ 97.513990] nouveau 0000:02:00.0: Enabling HDA controller [ 7535.677340] perf: interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [ 7852.837461] perf: interrupt took too long (3193 > 3150), lowering kernel.perf_event_max_sample_rate to 62000 [11568.696184] perf: interrupt took too long (4001 > 3991), lowering kernel.perf_event_max_sample_rate to 49000 [22296.478488] ACPI Error: Thread 3922940544 cannot release Mutex [PATM] acquired by thread 552271872 (20220331/exmutex-378) [22296.478498] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20220331/psparse-529) [22300.858189] wlo1: deauthenticating from C6F0280A0BB54BF85F55CBBA803B34AA by local choice (Reason: 3=DEAUTH_LEAVING) [22301.177865] PM: suspend entry (s2idle) [22301.343282] Filesystems sync: 0.165 seconds [22301.414459] Freezing user space processes ... (elapsed 0.002 seconds) done. [22301.416927] OOM killer disabled. [22301.416928] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [22301.418057] printk: Suspending console(s) (use no_console_suspend to debug) [22301.425023] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [22301.426465] sd 2:0:0:0: [sdb] Stopping disk [22301.429034] sd 0:0:0:0: [sda] Synchronizing SCSI cache [22301.454463] sd 0:0:0:0: [sda] Stopping disk [22301.627288] psmouse serio1: Failed to disable mouse on isa0060/serio1 [22302.442699] PM: suspend devices took 1.024 seconds [22302.469356] ACPI: EC: interrupt blocked [22302.469936] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [35C] ACPI: EC: interrupt unblocked [22306.351371] sd 0:0:0:0: [sda] Starting disk [22306.351435] sd 2:0:0:0: [sdb] Starting disk [22306.524022] iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled) [22306.658296] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [22306.658405] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [22306.661953] ata1.00: configured for UDMA/133 [22306.662233] ata3.00: configured for UDMA/133 [22308.414776] PM: resume devices took 2.068 seconds [22308.414801] OOM killer enabled. [22308.414805] Restarting tasks ... [22308.416309] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [22308.421830] done. [22308.421858] random: crng reseeded on system resumption [22308.467553] PM: suspend exit [22308.517949] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [22308.683445] r8169 0000:03:00.0 enp3s0: Link is Down [22312.192688] wlo1: authenticate with C6F0280A0BB54BF85F55CBBA803B34AA [22312.202916] wlo1: bad VHT capabilities, disabling VHT [22312.202921] wlo1: 80 MHz not supported, disabling VHT [22312.209353] wlo1: send auth to C6F0280A0BB54BF85F55CBBA803B34AA (try 1/3) [22312.236358] wlo1: authenticated [22312.251962] wlo1: associate with C6F0280A0BB54BF85F55CBBA803B34AA (try 1/3) [22312.258060] wlo1: RX AssocResp from C6F0280A0BB54BF85F55CBBA803B34AA (capab=0x1431 status=0 aid=5) [22312.259851] wlo1: associated [22312.316461] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [22312.338993] wlo1: Limiting TX power to 20 (20 - 0) dBm as advertised by C6F0280A0BB54BF85F55CBBA803B34AA [22334.245498] wlo1: deauthenticating from C6F0280A0BB54BF85F55CBBA803B34AA by local choice (Reason: 3=DEAUTH_LEAVING) [22334.553084] PM: suspend entry (s2idle) [22334.733123] Filesystems sync: 0.180 seconds [22334.800878] Freezing user space processes ... (elapsed 0.002 seconds) done. [22334.803189] OOM killer disabled. [22334.803190] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [22334.804152] printk: Suspending console(s) (use no_console_suspend to debug) [22334.813146] sd 0:0:0:0: [sda] Synchronizing SCSI cache [22334.814190] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [22334.815444] sd 2:0:0:0: [sdb] Stopping disk [22334.832956] sd 0:0:0:0: [sda] Stopping disk [22335.174840] PM: suspend devices took 0.370 seconds [22335.203060] ACPI: EC: interrupt blocked [22335.203853] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [35C] ACPI: EC: interrupt unblocked [22389.640831] sd 0:0:0:0: [sda] Starting disk [22389.640850] sd 2:0:0:0: [sdb] Starting disk [22389.816896] iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled) [22389.949774] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [22389.951218] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [22389.953976] ata1.00: configured for UDMA/133 [22389.955573] ata3.00: configured for UDMA/133 [22391.569354] PM: resume devices took 1.932 seconds [22391.569375] OOM killer enabled. [22391.569378] Restarting tasks ... done. [22391.576695] random: crng reseeded on system resumption [22391.576787] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [22391.623482] PM: suspend exit [22391.665538] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [22391.808792] r8169 0000:03:00.0 enp3s0: Link is Down [22395.221348] wlo1: authenticate with C6F0280A0BB54BF85F55CBBA803B34AA [22395.237568] wlo1: bad VHT capabilities, disabling VHT [22395.237572] wlo1: 80 MHz not supported, disabling VHT [22395.244260] wlo1: send auth to C6F0280A0BB54BF85F55CBBA803B34AA (try 1/3) [22395.267186] wlo1: authenticated [22395.280532] wlo1: associate with C6F0280A0BB54BF85F55CBBA803B34AA (try 1/3) [22395.292508] wlo1: RX AssocResp from C6F0280A0BB54BF85F55CBBA803B34AA (capab=0x1431 status=0 aid=5) [22395.299878] wlo1: associated [22395.361030] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [22395.384577] wlo1: Limiting TX power to 20 (20 - 0) dBm as advertised by C6F0280A0BB54BF85F55CBBA803B34AA [22405.017697] usb 1-2: new low-speed USB device number 5 using xhci_hcd [22405.173461] usb 1-2: New USB device found, idVendor=17ef, idProduct=608c, bcdDevice= 2.18 [22405.173481] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22405.173489] usb 1-2: Product: Lenovo Calliope USB Keyboard [22405.173495] usb 1-2: Manufacturer: Lenovo [22405.187862] input: Lenovo Lenovo Calliope USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:17EF:608C.0002/input/input29 [22405.240380] hid-generic 0003:17EF:608C.0002: input,hidraw1: USB HID v1.11 Keyboard [Lenovo Lenovo Calliope USB Keyboard] on usb-0000:00:14.0-2/input0 [22405.261085] input: Lenovo Lenovo Calliope USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:17EF:608C.0003/input/input30 [22405.312607] input: Lenovo Lenovo Calliope USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:17EF:608C.0003/input/input31 [22405.312880] hid-generic 0003:17EF:608C.0003: input,hidraw2: USB HID v1.11 Device [Lenovo Lenovo Calliope USB Keyboard] on usb-0000:00:14.0-2/input1 [22409.080831] nouveau 0000:02:00.0: Enabling HDA controller [22415.280859] usb 1-4: new high-speed USB device number 6 using xhci_hcd [22415.411769] usb 1-4: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 3.a3 [22415.411776] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22415.411778] usb 1-4: Product: USB2.0 Hub [22415.411779] usb 1-4: Manufacturer: VIA Labs, Inc. [22415.418575] hub 1-4:1.0: USB hub found [22415.418787] hub 1-4:1.0: 5 ports detected [22415.545909] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd [22415.562474] usb 2-4: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 3.a3 [22415.562481] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22415.562483] usb 2-4: Product: USB3.0 Hub [22415.562484] usb 2-4: Manufacturer: VIA Labs, Inc. [22415.569380] hub 2-4:1.0: USB hub found [22415.569548] hub 2-4:1.0: 4 ports detected [22416.136786] usb 1-4.1: new high-speed USB device number 7 using xhci_hcd [22416.275699] usb 1-4.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [22416.275883] usb 1-4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [22416.275885] usb 1-4.1: Product: USB 2.0 Hub [22416.278456] hub 1-4.1:1.0: USB hub found [22416.278585] hub 1-4.1:1.0: 4 ports detected [22417.084879] usb 2-4: USB disconnect, device number 2 [22417.084940] usb 2-4: Failed to suspend device, error -19 [22417.307155] usb 2-4: new SuperSpeed USB device number 3 using xhci_hcd [22417.322000] usb 2-4: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 3.a3 [22417.322017] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22417.322023] usb 2-4: Product: USB3.0 Hub [22417.322027] usb 2-4: Manufacturer: VIA Labs, Inc. [22417.324781] hub 2-4:1.0: USB hub found [22417.324952] hub 2-4:1.0: 4 ports detected [22417.852285] usb 2-4.4: new SuperSpeed USB device number 4 using xhci_hcd [22417.864776] usb 2-4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00 [22417.864794] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22417.864802] usb 2-4.4: Product: USB 10/100/1000 LAN [22417.864807] usb 2-4.4: Manufacturer: Realtek [22417.864811] usb 2-4.4: SerialNumber: ... [22417.959815] usbcore: registered new interface driver r8152 [22417.970091] usbcore: registered new interface driver cdc_ether [22417.973085] usbcore: registered new interface driver r8153_ecm [22418.026556] usb 2-4.4: reset SuperSpeed USB device number 4 using xhci_hcd [22418.061786] r8152 2-4.4:1.0: load rtl8153b-2 v1 10/23/19 successfully [22418.090408] r8152 2-4.4:1.0 eth0: v1.12.13 [22418.145484] r8152 2-4.4:1.0 enp0s20f0u4u4: renamed from eth0 [22418.930104] usb 1-3: new low-speed USB device number 8 using xhci_hcd [22419.060223] usb 1-3: New USB device found, idVendor=17ef, idProduct=608d, bcdDevice= 1.00 [22419.060243] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22419.060251] usb 1-3: Product: lenovo USB Optical Mouse [22419.060257] usb 1-3: Manufacturer: PixArt [22419.064889] input: PixArt lenovo USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:17EF:608D.0004/input/input32 [22419.065788] hid-generic 0003:17EF:608D.0004: input,hidraw3: USB HID v1.11 Mouse [PixArt lenovo USB Optical Mouse] on usb-0000:00:14.0-3/input0 [22420.346216] usb 1-4.5: new high-speed USB device number 9 using xhci_hcd [22420.424889] usb 1-4.5: New USB device found, idVendor=2109, idProduct=8888, bcdDevice= 0.01 [22420.424905] usb 1-4.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22420.424911] usb 1-4.5: Product: USB Billboard Device [22420.424916] usb 1-4.5: Manufacturer: VIA Labs, Inc. [22420.424919] usb 1-4.5: SerialNumber: ... [22421.009813] r8152 2-4.4:1.0 enp0s20f0u4u4: Stop submitting intr, status -71 [22421.180582] usb 1-4: USB disconnect, device number 6 [22421.180599] usb 1-4.1: USB disconnect, device number 7 [22421.183179] usb 1-4.5: USB disconnect, device number 9 [22421.435365] usb 1-4: new high-speed USB device number 10 using xhci_hcd [22421.563898] usb 1-4: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 3.a3 [22421.563917] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22421.563925] usb 1-4: Product: USB2.0 Hub [22421.563930] usb 1-4: Manufacturer: VIA Labs, Inc. [22421.573160] hub 1-4:1.0: USB hub found [22421.573351] hub 1-4:1.0: 5 ports detected [22421.990346] usb 2-4: USB disconnect, device number 3 [22421.990362] usb 2-4.4: USB disconnect, device number 4 [22422.252672] usb 2-4: new SuperSpeed USB device number 5 using xhci_hcd [22422.318105] usb 2-4: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 3.a3 [22422.318123] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22422.318130] usb 2-4: Product: USB3.0 Hub [22422.318134] usb 2-4: Manufacturer: VIA Labs, Inc. [22422.321065] hub 2-4:1.0: USB hub found [22422.321408] hub 2-4:1.0: 4 ports detected [22422.393170] usb 1-4.1: new high-speed USB device number 11 using xhci_hcd [22422.531440] usb 1-4.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [22422.531462] usb 1-4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [22422.531469] usb 1-4.1: Product: USB 2.0 Hub [22422.533043] hub 1-4.1:1.0: USB hub found [22422.533259] hub 1-4.1:1.0: 4 ports detected [22422.598365] usb 1-4.5: new high-speed USB device number 12 using xhci_hcd [22422.676093] usb 1-4.5: New USB device found, idVendor=2109, idProduct=8888, bcdDevice= 0.01 [22422.676111] usb 1-4.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22422.676118] usb 1-4.5: Product: USB Billboard Device [22422.676122] usb 1-4.5: Manufacturer: VIA Labs, Inc. [22422.676127] usb 1-4.5: SerialNumber: ... [22423.395374] usb 2-4.4: new SuperSpeed USB device number 6 using xhci_hcd [22423.407960] usb 2-4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00 [22423.407978] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22423.407985] usb 2-4.4: Product: USB 10/100/1000 LAN [22423.407990] usb 2-4.4: Manufacturer: Realtek [22423.407995] usb 2-4.4: SerialNumber: ... [22423.479674] usb 2-4.4: reset SuperSpeed USB device number 6 using xhci_hcd [22423.515227] r8152 2-4.4:1.0: load rtl8153b-2 v1 10/23/19 successfully [22423.548289] r8152 2-4.4:1.0 eth0: v1.12.13 [22423.655152] r8152 2-4.4:1.0 enp0s20f0u4u4: renamed from eth0 [22426.868646] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f0u4u4: link becomes ready [22426.869528] r8152 2-4.4:1.0 enp0s20f0u4u4: carrier on [22435.200707] r8152 2-4.4:1.0 enp0s20f0u4u4: Stop submitting intr, status -71 [22436.865766] r8152 2-4.4:1.0 enp0s20f0u4u4: Tx status -71 [22436.872896] r8152 2-4.4:1.0 enp0s20f0u4u4: Tx status -71 [22436.905399] r8152 2-4.4:1.0 enp0s20f0u4u4: Tx status -71 [22436.912366] r8152 2-4.4:1.0 enp0s20f0u4u4: Tx status -71 [22436.919504] r8152 2-4.4:1.0 enp0s20f0u4u4: Tx status -71 [22436.926379] r8152 2-4.4:1.0 enp0s20f0u4u4: Tx status -71 [22437.517510] ACPI Error: Thread 718798848 cannot release Mutex [PATM] acquired by thread 2198896640 (20220331/exmutex-378) [22437.517521] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20220331/psparse-529) [22437.690954] r8152 2-4.4:1.0 enp0s20f0u4u4: Tx status -71 [22437.855886] r8152 2-4.4:1.0 enp0s20f0u4u4: Tx status -71 [22438.254467] r8152 2-4.4:1.0 enp0s20f0u4u4: Tx status -71 [22438.336363] r8152 2-4.4:1.0 enp0s20f0u4u4: Tx status -71 [22438.677182] usb 2-4: USB disconnect, device number 5 [22438.677198] usb 2-4.4: USB disconnect, device number 6 [22438.942420] usb 2-4: new SuperSpeed USB device number 7 using xhci_hcd [22438.958809] usb 2-4: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 3.a3 [22438.958827] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22438.958833] usb 2-4: Product: USB3.0 Hub [22438.958839] usb 2-4: Manufacturer: VIA Labs, Inc. [22438.961884] hub 2-4:1.0: USB hub found [22438.962223] hub 2-4:1.0: 4 ports detected [22439.971204] usb 2-4.4: new SuperSpeed USB device number 8 using xhci_hcd [22439.984648] usb 2-4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00 [22439.984666] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [22439.984672] usb 2-4.4: Product: USB 10/100/1000 LAN [22439.984678] usb 2-4.4: Manufacturer: Realtek [22439.984682] usb 2-4.4: SerialNumber: ... [22440.056475] usb 2-4.4: reset SuperSpeed USB device number 8 using xhci_hcd [22440.090138] r8152 2-4.4:1.0: load rtl8153b-2 v1 10/23/19 successfully [22440.119434] r8152 2-4.4:1.0 eth0: v1.12.13 [22440.189832] r8152 2-4.4:1.0 enp0s20f0u4u4: renamed from eth0 [22443.460301] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f0u4u4: link becomes ready [22443.461029] r8152 2-4.4:1.0 enp0s20f0u4u4: carrier on [22775.339884] nouveau 0000:02:00.0: Enabling HDA controller [23582.067085] perf: interrupt took too long (5008 > 5001), lowering kernel.perf_event_max_sample_rate to 39000 [28233.852439] rfkill: input handler enabled [28234.763416] r8152 2-4.4:1.0 enp0s20f0u4u4: Stop submitting intr, status -71 [28234.866164] net_ratelimit: 3 callbacks suppressed [28234.866174] r8152 2-4.4:1.0 enp0s20f0u4u4: Tx status -71 [28235.043534] docker0: port 1(vethfa872ac) entered disabled state [28235.043655] veth295fe93: renamed from eth0 [28235.075021] docker0: port 1(vethfa872ac) entered disabled state [28235.076892] device vethfa872ac left promiscuous mode [28235.076925] docker0: port 1(vethfa872ac) entered disabled state [28235.097241] usb 1-4: USB disconnect, device number 10 [28235.097259] usb 1-4.1: USB disconnect, device number 11 [28235.098661] usb 1-4.5: USB disconnect, device number 12 [28235.126019] usb 2-4: USB disconnect, device number 7 [28235.126036] usb 2-4.4: USB disconnect, device number 8 [28235.490056] nouveau 0000:02:00.0: Enabling HDA controller [28235.837594] usb 1-2: USB disconnect, device number 5 [28236.077336] wlo1: deauthenticating from C6F0280A0BB54BF85F55CBBA803B34AA by local choice (Reason: 3=DEAUTH_LEAVING) [28237.077464] EXT4-fs (sdb6): unmounting filesystem. [28237.099884] ACPI Error: Thread 721048192 cannot release Mutex [PATM] acquired by thread 4199940096 (20220331/exmutex-378) [28237.099895] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20220331/psparse-529) [28237.127178] zram0: detected capacity change from 16777216 to 0 [28238.217338] EXT4-fs (sda3): unmounting filesystem.