-- Journal begins at Fri 2023-05-19 03:10:31 EDT, ends at Mon 2023-05-29 07:51:31 EDT. -- [ 0.000000] microcode: microcode updated early to revision 0xf0, date = 2021-11-15 [ 0.000000] Linux version 5.10.0-23-amd64 (XXX@XXX) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.179-1 (2023-05-12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-23-amd64 root=UUID=HASH_70B-E3A3-C22C-7D24-C8C92CF086F7 ro quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040400000-0x000000006f6c5fff] usable [ 0.000000] BIOS-e820: [mem 0x000000006f6c6000-0x000000006f6c6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006f6c7000-0x000000006f6c7fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006f6c8000-0x000000007990efff] usable [ 0.000000] BIOS-e820: [mem 0x000000007990f000-0x0000000079d8efff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079d8f000-0x000000007a26cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a26d000-0x000000007a31efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007a31f000-0x000000007ae1efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ae1f000-0x000000007aefefff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000007aeff000-0x000000007aefffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007af00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI 2.0=0x7a280000 ACPI=0x7a280000 SMBIOS=0x7ac3a000 MEMATTR=0x76c0d018 ESRT=0x7538f718 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7B98/Z390-A PRO (MS-7B98), BIOS 1.D0 01/19/2021 [ 0.000000] tsc: Detected 2900.000 MHz processor [ 0.000000] tsc: Detected 2899.886 MHz TSC [ 0.000729] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000732] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000742] last_pfn = 0x87e000 max_arch_pfn = 0x400000000 [ 0.000745] MTRR default type: write-back [ 0.000746] MTRR fixed ranges enabled: [ 0.000747] 00000-9FFFF write-back [ 0.000748] A0000-BFFFF uncachable [ 0.000749] C0000-FFFFF write-protect [ 0.000750] MTRR variable ranges enabled: [ 0.000751] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000752] 1 base 007C000000 mask 7FFC000000 uncachable [ 0.000753] 2 base 007B800000 mask 7FFF800000 uncachable [ 0.000754] 3 base 4000000000 mask 4000000000 uncachable [ 0.000755] 4 disabled [ 0.000755] 5 disabled [ 0.000756] 6 disabled [ 0.000756] 7 disabled [ 0.000757] 8 disabled [ 0.000757] 9 disabled [ 0.001072] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001328] last_pfn = 0x7af00 max_arch_pfn = 0x400000000 [ 0.015034] esrt: Reserving ESRT space from 0x000000007538f718 to 0x000000007538f750. [ 0.015038] e820: update [mem 0x7538f000-0x7538ffff] usable ==> reserved [ 0.015056] Using GB pages for direct mapping [ 0.015703] RAMDISK: [mem 0x31a8b000-0x34d3cfff] ACPI: Early table checksum verification disabled [ 0.015710] ACPI: RSDP 0x000000007A280000 000024 (v02 ALASKA) [ 0.015713] ACPI: XSDT 0x000000007A2800A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.015718] ACPI: FACP 0x000000007A2C11A8 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.015723] ACPI: DSDT 0x000000007A280208 040FA0 (v02 ALASKA A M I 01072009 INTL 20160527) [ 0.015726] ACPI: FACS 0x000000007A31E080 000040 [ 0.015729] ACPI: APIC 0x000000007A2C12C0 0000A0 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.015731] ACPI: FPDT 0x000000007A2C1360 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.015734] ACPI: FIDT 0x000000007A2C13A8 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.015737] ACPI: MCFG 0x000000007A2C1448 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.015740] ACPI: SSDT 0x000000007A2C1488 001B60 (v02 CpuRef CpuSsdt 00003000 INTL 20160527) [ 0.015743] ACPI: SSDT 0x000000007A2C2FE8 0031C6 (v02 SaSsdt SaSsdt 00003000 INTL 20160527) [ 0.015746] ACPI: SSDT 0x000000007A2C61B0 002710 (v02 PegSsd PegSsdt 00001000 INTL 20160527) [ 0.015749] ACPI: HPET 0x000000007A2C88C0 000038 (v01 ALASKA A M I 00000002 01000013) [ 0.015752] ACPI: SSDT 0x000000007A2C88F8 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527) [ 0.015755] ACPI: SSDT 0x000000007A2C98A8 003075 (v02 INTEL xh_cfsd4 00000000 INTL 20160527) [ 0.015758] ACPI: UEFI 0x000000007A2CC920 000042 (v01 ALASKA A M I 00000002 01000013) [ 0.015760] ACPI: LPIT 0x000000007A2CC968 000094 (v01 ALASKA A M I 00000002 01000013) [ 0.015763] ACPI: SSDT 0x000000007A2CCA00 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527) [ 0.015766] ACPI: SSDT 0x000000007A2CF1E0 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527) [ 0.015769] ACPI: DBGP 0x000000007A2D06C8 000034 (v01 ALASKA A M I 00000002 01000013) [ 0.015772] ACPI: DBG2 0x000000007A2D0700 000054 (v00 ALASKA A M I 00000002 01000013) [ 0.015774] ACPI: SSDT 0x000000007A2D0758 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527) [ 0.015777] ACPI: SSDT 0x000000007A2D22C0 000144 (v02 Intel ADebTabl 00001000 INTL 20160527) [ 0.015780] ACPI: BGRT 0x000000007A2D2408 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.015783] ACPI: WSMT 0x000000007A2D2440 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.015786] ACPI: Reserving FACP table memory at [mem 0x7a2c11a8-0x7a2c12bb] ACPI: Reserving DSDT table memory at [mem 0x7a280208-0x7a2c11a7] ACPI: Reserving FACS table memory at [mem 0x7a31e080-0x7a31e0bf] ACPI: Reserving APIC table memory at [mem 0x7a2c12c0-0x7a2c135f] ACPI: Reserving FPDT table memory at [mem 0x7a2c1360-0x7a2c13a3] ACPI: Reserving FIDT table memory at [mem 0x7a2c13a8-0x7a2c1443] ACPI: Reserving MCFG table memory at [mem 0x7a2c1448-0x7a2c1483] ACPI: Reserving SSDT table memory at [mem 0x7a2c1488-0x7a2c2fe7] ACPI: Reserving SSDT table memory at [mem 0x7a2c2fe8-0x7a2c61ad] ACPI: Reserving SSDT table memory at [mem 0x7a2c61b0-0x7a2c88bf] ACPI: Reserving HPET table memory at [mem 0x7a2c88c0-0x7a2c88f7] ACPI: Reserving SSDT table memory at [mem 0x7a2c88f8-0x7a2c98a5] ACPI: Reserving SSDT table memory at [mem 0x7a2c98a8-0x7a2cc91c] ACPI: Reserving UEFI table memory at [mem 0x7a2cc920-0x7a2cc961] ACPI: Reserving LPIT table memory at [mem 0x7a2cc968-0x7a2cc9fb] ACPI: Reserving SSDT table memory at [mem 0x7a2cca00-0x7a2cf1dd] ACPI: Reserving SSDT table memory at [mem 0x7a2cf1e0-0x7a2d06c1] ACPI: Reserving DBGP table memory at [mem 0x7a2d06c8-0x7a2d06fb] ACPI: Reserving DBG2 table memory at [mem 0x7a2d0700-0x7a2d0753] ACPI: Reserving SSDT table memory at [mem 0x7a2d0758-0x7a2d22be] ACPI: Reserving SSDT table memory at [mem 0x7a2d22c0-0x7a2d2403] ACPI: Reserving BGRT table memory at [mem 0x7a2d2408-0x7a2d243f] ACPI: Reserving WSMT table memory at [mem 0x7a2d2440-0x7a2d2467] ACPI: Local APIC address 0xfee00000 [ 0.015945] No NUMA configuration found [ 0.015946] Faking a node at [mem 0x0000000000000000-0x000000087dffffff] NODE_DATA(0) allocated [mem 0x87dfd6000-0x87dffffff] Zone ranges: [ 0.016306] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000087dffffff] Device empty [ 0.016311] Movable zone start for each node [ 0.016314] Early memory node ranges [ 0.016315] node 0: [mem 0x0000000000001000-0x000000000009efff] node 0: [mem 0x0000000000100000-0x000000003fffffff] node 0: [mem 0x0000000040400000-0x000000006f6c5fff] node 0: [mem 0x000000006f6c8000-0x000000007990efff] node 0: [mem 0x0000000079d8f000-0x000000007a26cfff] node 0: [mem 0x000000007aeff000-0x000000007aefffff] node 0: [mem 0x0000000100000000-0x000000087dffffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000087dffffff] On node 0 totalpages: 8354186 [ 0.016326] DMA zone: 64 pages used for memmap [ 0.016327] DMA zone: 23 pages reserved [ 0.016328] DMA zone: 3998 pages, LIFO batch:0 [ 0.016329] DMA32 zone: 7720 pages used for memmap [ 0.016329] DMA32 zone: 494060 pages, LIFO batch:63 [ 0.016330] Normal zone: 122752 pages used for memmap [ 0.016331] Normal zone: 7856128 pages, LIFO batch:63 [ 0.016333] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.016359] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.019283] On node 0, zone DMA32: 1024 pages in unavailable ranges [ 0.019558] On node 0, zone DMA32: 2 pages in unavailable ranges [ 0.019575] On node 0, zone DMA32: 1152 pages in unavailable ranges [ 0.019602] On node 0, zone DMA32: 3218 pages in unavailable ranges [ 0.019999] On node 0, zone Normal: 20736 pages in unavailable ranges [ 0.020067] On node 0, zone Normal: 8192 pages in unavailable ranges [ 0.020293] ACPI: PM-Timer IO Port: 0x1808 [ 0.020295] ACPI: Local APIC address 0xfee00000 [ 0.020299] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.020300] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.020301] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.020301] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.020302] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.020303] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.020341] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.020343] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.020344] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.020345] ACPI: IRQ0 used by override. [ 0.020346] ACPI: IRQ9 used by override. [ 0.020348] Using ACPI (MADT) for SMP configuration information [ 0.020349] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.020355] e820: update [mem 0x751ca000-0x75226fff] usable ==> reserved [ 0.020368] TSC deadline timer available [ 0.020369] smpboot: Allowing 6 CPUs, 0 hotplug CPUs [ 0.020387] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff] PM: hibernation: Registered nosave memory: [mem 0x6f6c6000-0x6f6c6fff] PM: hibernation: Registered nosave memory: [mem 0x6f6c7000-0x6f6c7fff] PM: hibernation: Registered nosave memory: [mem 0x751ca000-0x75226fff] PM: hibernation: Registered nosave memory: [mem 0x7538f000-0x7538ffff] PM: hibernation: Registered nosave memory: [mem 0x7990f000-0x79d8efff] PM: hibernation: Registered nosave memory: [mem 0x7a26d000-0x7a31efff] PM: hibernation: Registered nosave memory: [mem 0x7a31f000-0x7ae1efff] PM: hibernation: Registered nosave memory: [mem 0x7ae1f000-0x7aefefff] PM: hibernation: Registered nosave memory: [mem 0x7af00000-0x7fffffff] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xdfffffff] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.020410] Booting paravirtualized kernel on bare hardware [ 0.020412] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.024434] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.024591] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144 [ 0.024597] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152 [ 0.024598] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.024626] Built 1 zonelists, mobility grouping on. Total pages: 8223627 [ 0.024627] Policy zone: Normal [ 0.024628] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-23-amd64 root=UUID=HASH_70B-E3A3-C22C-7D24-C8C92CF086F7 ro quiet [ 0.026104] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.026830] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.026890] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.043569] Memory: 1891164K/33416744K available (12295K kernel code, 2536K rwdata, 7568K rodata, 2668K init, 17720K bss, 856680K reserved, 0K cma-reserved) [ 0.044347] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.044383] Kernel/User page tables isolation: enabled [ 0.044397] ftrace: allocating 36577 entries in 143 pages [ 0.062547] ftrace: allocated 143 pages with 5 groups [ 0.062711] rcu: Hierarchical RCU implementation. [ 0.062713] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6. [ 0.062714] Rude variant of Tasks RCU enabled. [ 0.062714] Tracing variant of Tasks RCU enabled. [ 0.062715] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.062716] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.067157] NR_IRQS: 524544, nr_irqs: 1536, preallocated irqs: 16 [ 0.067578] random: crng init done [ 0.067596] Console: colour dummy device 80x25 [ 0.067610] printk: console [tty0] enabled [ 0.067622] ACPI: Core revision 20200925 [ 0.067927] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.068016] APIC: Switch to symmetric I/O mode setup [ 0.069449] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.074804] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.092016] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29ccd767b87, max_idle_ns: 440795223720 ns [ 0.092019] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.77 BogoMIPS (lpj=11599544) [ 0.092021] pid_max: default: 32768 minimum: 301 [ 0.096054] LSM: Security Framework initializing [ 0.096062] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.096083] AppArmor: AppArmor initialized [ 0.096085] TOMOYO Linux initialized [ 0.096138] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.096182] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.096423] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.096446] process: using mwait in idle threads [ 0.096449] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8 [ 0.096450] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.096453] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.096454] Spectre V2 : Mitigation: IBRS [ 0.096455] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.096456] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.096456] RETBleed: Mitigation: IBRS [ 0.096458] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.096459] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.096464] MDS: Mitigation: Clear CPU buffers [ 0.096465] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.096469] SRBDS: Mitigation: Microcode [ 0.113363] Freeing SMP alternatives memory: 32K [ 0.115030] smpboot: CPU0: Intel(R) Core(TM) i5-9400 CPU @ 2.90GHz (family: 0x6, model: 0x9e, stepping: 0xa) [ 0.115135] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.115145] ... version: 4 [ 0.115146] ... bit width: 48 [ 0.115147] ... generic registers: 8 [ 0.115147] ... value mask: 0000ffffffffffff [ 0.115148] ... max period: 00007fffffffffff [ 0.115148] ... fixed-purpose events: 3 [ 0.115149] ... event mask: 00000007000000ff [ 0.115246] rcu: Hierarchical SRCU implementation. [ 0.115888] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.115942] smp: Bringing up secondary CPUs ... [ 0.116015] x86: Booting SMP configuration: [ 0.116016] .... node #0, CPUs: #1 #2 #3 #4 #5 [ 0.124058] smp: Brought up 1 node, 6 CPUs [ 0.124058] smpboot: Max logical packages: 1 [ 0.124058] smpboot: Total of 6 processors activated (34798.63 BogoMIPS) [ 0.158747] node 0 deferred pages initialised in 36ms [ 0.160555] devtmpfs: initialized [ 0.160555] x86/mm: Memory block size: 128MB [ 0.162330] PM: Registering ACPI NVS region [mem 0x6f6c6000-0x6f6c6fff] (4096 bytes) [ 0.162330] PM: Registering ACPI NVS region [mem 0x7a26d000-0x7a31efff] (729088 bytes) [ 0.162330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.162330] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.162330] pinctrl core: initialized pinctrl subsystem [ 0.162330] NET: Registered protocol family 16 [ 0.164197] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.164422] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.164654] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.164671] thermal_sys: Registered thermal governor 'fair_share' [ 0.164671] thermal_sys: Registered thermal governor 'bang_bang' [ 0.164671] thermal_sys: Registered thermal governor 'step_wise' [ 0.164671] thermal_sys: Registered thermal governor 'user_space' [ 0.164671] thermal_sys: Registered thermal governor 'power_allocator' [ 0.164671] cpuidle: using governor ladder [ 0.164671] cpuidle: using governor menu [ 0.164671] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.164671] ACPI: bus type PCI registered [ 0.164671] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.164671] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.164671] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.164671] PCI: Using configuration type 1 for base access [ 0.165355] Kprobes globally optimized [ 0.165358] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.165358] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.280328] ACPI: Added _OSI(Module Device) [ 0.280328] ACPI: Added _OSI(Processor Device) [ 0.280328] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.280328] ACPI: Added _OSI(Processor Aggregator Device) [ 0.280328] ACPI: Added _OSI(Linux-Dell-Video) [ 0.280328] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.280328] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.357681] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.364480] ACPI: Dynamic OEM Table Load: [ 0.364485] ACPI: SSDT 0xFFFF901754FB9600 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527) [ 0.365644] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.367336] ACPI: Dynamic OEM Table Load: [ 0.367341] ACPI: SSDT 0xFFFF901754FF6400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527) [ 0.368603] ACPI: Dynamic OEM Table Load: [ 0.368608] ACPI: SSDT 0xFFFF9010C0961000 0005E4 (v02 PmRef Cpu0Ist 00003000 INTL 20160527) [ 0.369956] ACPI: Dynamic OEM Table Load: [ 0.369960] ACPI: SSDT 0xFFFF901754FF2E00 000149 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527) [ 0.371124] ACPI: Dynamic OEM Table Load: [ 0.371128] ACPI: SSDT 0xFFFF9010C0966800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527) [ 0.372553] ACPI: Dynamic OEM Table Load: [ 0.372558] ACPI: SSDT 0xFFFF9010C0965800 0005FC (v02 PmRef ApIst 00003000 INTL 20160527) [ 0.373881] ACPI: Dynamic OEM Table Load: [ 0.373885] ACPI: SSDT 0xFFFF901754FF7C00 000317 (v02 PmRef ApHwp 00003000 INTL 20160527) [ 0.375217] ACPI: Dynamic OEM Table Load: [ 0.375221] ACPI: SSDT 0xFFFF9010C097A000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527) [ 0.377096] ACPI: Dynamic OEM Table Load: [ 0.377100] ACPI: SSDT 0xFFFF901754FF4000 00030A (v02 PmRef ApCst 00003000 INTL 20160527) [ 0.382242] ACPI: Interpreter enabled [ 0.382283] ACPI: (supports S0 S3 S4 S5) [ 0.382284] ACPI: Using IOAPIC for interrupt routing [ 0.382322] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.383655] ACPI: Enabled 10 GPEs in block 00 to 7F [ 0.398841] ACPI: Power Resource [USBC] (on) [ 0.402489] ACPI: Power Resource [V0PR] (on) [ 0.402900] ACPI: Power Resource [V1PR] (on) [ 0.403307] ACPI: Power Resource [V2PR] (on) [ 0.409476] ACPI: Power Resource [WRST] (on) [ 0.415159] ACPI: Power Resource [FN00] (off) [ 0.415248] ACPI: Power Resource [FN01] (off) [ 0.415332] ACPI: Power Resource [FN02] (off) [ 0.415418] ACPI: Power Resource [FN03] (off) [ 0.415504] ACPI: Power Resource [FN04] (off) [ 0.416111] ACPI: Power Resource [PIN] (off) [ 0.416536] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.416543] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability LTR] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.417813] PCI host bridge to bus 0000:00 [ 0.417815] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000 [ 0.418228] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 0.418269] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.418490] pci 0000:00:02.0: [8086:3e92] type 00 class 0x038000 [ 0.418497] pci 0000:00:02.0: reg 0x10: [mem 0x6012000000-0x6012ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 [ 0.418687] pci 0000:00:08.0: reg 0x10: [mem 0x601311a000-0x601311afff 64bit] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000 [ 0.418877] pci 0000:00:12.0: reg 0x10: [mem 0x6013119000-0x6013119fff 64bit] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330 [ 0.419091] pci 0000:00:14.0: reg 0x10: [mem 0x6013100000-0x601310ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.419562] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000 [ 0.419578] pci 0000:00:14.2: reg 0x10: [mem 0x6013114000-0x6013115fff 64bit] pci 0000:00:14.2: reg 0x18: [mem 0x6013118000-0x6013118fff 64bit] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000 [ 0.419775] pci 0000:00:16.0: reg 0x10: [mem 0x6013117000-0x6013117fff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.420086] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601 [ 0.420098] pci 0000:00:17.0: reg 0x10: [mem 0x81220000-0x81221fff] pci 0000:00:17.0: reg 0x14: [mem 0x81223000-0x812230ff] pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097] pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f] pci 0000:00:17.0: reg 0x24: [mem 0x81222000-0x812227ff] pci 0000:00:17.0: PME# supported from D3hot [ 0.420352] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400 [ 0.420419] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.420628] pci 0000:00:1b.2: [8086:a342] type 01 class 0x060400 [ 0.420706] pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold [ 0.420728] pci 0000:00:1b.2: PTM enabled (root), 4ns granularity [ 0.420969] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100 [ 0.421308] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300 [ 0.421338] pci 0000:00:1f.3: reg 0x10: [mem 0x6013110000-0x6013113fff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0x6013000000-0x60130fffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.422170] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500 [ 0.422194] pci 0000:00:1f.4: reg 0x10: [mem 0x6013116000-0x60131160ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000 [ 0.422418] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000 [ 0.422614] pci 0000:00:1f.6: reg 0x10: [mem 0x81200000-0x8121ffff] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.422915] pci 0000:01:00.0: [10de:1380] type 00 class 0x030000 [ 0.422926] pci 0000:01:00.0: reg 0x10: [mem 0x80000000-0x80ffffff] pci 0000:01:00.0: reg 0x14: [mem 0x6000000000-0x600fffffff 64bit pref] pci 0000:01:00.0: reg 0x1c: [mem 0x6010000000-0x6011ffffff 64bit pref] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f] pci 0000:01:00.0: reg 0x30: [mem 0x81000000-0x8107ffff pref] pci 0000:01:00.0: BAR 1: assigned to efifb [ 0.423045] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.423100] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300 [ 0.423109] pci 0000:01:00.1: reg 0x10: [mem 0x81080000-0x81083fff] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 0.436033] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0x80000000-0x810fffff] pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6011ffffff 64bit pref] acpiphp: Slot [1] registered [ 0.436153] pci 0000:00:1b.0: PCI bridge to [bus 02] pci 0000:03:00.0: [1b4b:9215] type 00 class 0x010601 [ 0.436276] pci 0000:03:00.0: reg 0x10: [io 0x3050-0x3057] pci 0000:03:00.0: reg 0x14: [io 0x3040-0x3043] pci 0000:03:00.0: reg 0x18: [io 0x3030-0x3037] pci 0000:03:00.0: reg 0x1c: [io 0x3020-0x3023] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x301f] pci 0000:03:00.0: reg 0x24: [mem 0x81140000-0x811407ff] pci 0000:03:00.0: reg 0x30: [mem 0x81100000-0x8113ffff pref] pci 0000:03:00.0: Enabling fixed DMA alias to 00.1 [ 0.436373] pci 0000:03:00.0: PME# supported from D3hot [ 0.436458] pci 0000:00:1b.2: PCI bridge to [bus 03] pci 0000:00:1b.2: bridge window [io 0x3000-0x3fff] pci 0000:00:1b.2: bridge window [mem 0x81100000-0x811fffff] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.438291] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1 [ 0.438374] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.438456] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.438538] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.438620] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.438702] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.438785] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.439649] iommu: Default domain type: Translated [ 0.440032] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.440032] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.440032] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.440032] vgaarb: loaded [ 0.440090] EDAC MC: Ver: 3.0.0 [ 0.440162] Registered efivars operations [ 0.440162] NetLabel: Initializing [ 0.440162] NetLabel: domain hash size = 128 [ 0.440162] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.440162] NetLabel: unlabeled traffic allowed by default [ 0.440162] PCI: Using ACPI for IRQ routing [ 0.484335] PCI: pci_cache_line_size set to 64 bytes [ 0.484403] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] e820: reserve RAM buffer [mem 0x6f6c6000-0x6fffffff] e820: reserve RAM buffer [mem 0x751ca000-0x77ffffff] e820: reserve RAM buffer [mem 0x7538f000-0x77ffffff] e820: reserve RAM buffer [mem 0x7990f000-0x7bffffff] e820: reserve RAM buffer [mem 0x7a26d000-0x7bffffff] e820: reserve RAM buffer [mem 0x7af00000-0x7bffffff] e820: reserve RAM buffer [mem 0x87e000000-0x87fffffff] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.485573] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.488034] clocksource: Switched to clocksource tsc-early [ 0.497245] VFS: Disk quotas dquot_6.6.0 [ 0.497259] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.497363] AppArmor: AppArmor Filesystem Enabled [ 0.497376] pnp: PnP ACPI init [ 0.497473] system 00:00: [mem 0x40000000-0x403fffff] has been reserved [ 0.497478] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.497786] system 00:01: [io 0x0a00-0x0a0f] has been reserved [ 0.497787] system 00:01: [io 0x0a10-0x0a1f] has been reserved [ 0.497788] system 00:01: [io 0x0a20-0x0a2f] has been reserved [ 0.497789] system 00:01: [io 0x0a30-0x0a3f] has been reserved [ 0.497793] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.498364] pnp 00:02: [dma 0 disabled] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.498980] pnp 00:03: [dma 0 disabled] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.499123] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.499124] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.499128] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.499243] system 00:05: [io 0x1854-0x1857] has been reserved [ 0.499247] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.499428] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.499430] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.499431] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.499433] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved [ 0.499435] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.499436] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.499437] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.499438] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.499441] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.499675] system 00:07: [io 0x1800-0x18fe] could not be reserved [ 0.499677] system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved [ 0.499678] system 00:07: [mem 0xfd6c0000-0xfd6cffff] has been reserved [ 0.499680] system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.499681] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.499682] system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.499683] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.499687] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.499997] system 00:08: [io 0x2000-0x20fe] has been reserved [ 0.500000] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.500285] system 00:09: [mem 0xfd6e0000-0xfd6effff] has been reserved [ 0.500286] system 00:09: [mem 0xfd6d0000-0xfd6dffff] has been reserved [ 0.500287] system 00:09: [mem 0xfd6b0000-0xfd6bffff] has been reserved [ 0.500289] system 00:09: [mem 0xfd6a0000-0xfd6affff] has been reserved [ 0.500292] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.501310] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.502348] pnp: PnP ACPI: found 11 devices [ 0.508021] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.508075] NET: Registered protocol family 2 [ 0.508206] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.509928] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.510077] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.510317] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.510378] TCP: Hash tables configured (established 262144 bind 65536) [ 0.510428] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.510502] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.510574] NET: Registered protocol family 1 [ 0.510578] NET: Registered protocol family 44 [ 0.510588] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0x80000000-0x810fffff] pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6011ffffff 64bit pref] pci 0000:00:1b.0: PCI bridge to [bus 02] pci 0000:00:1b.2: PCI bridge to [bus 03] pci 0000:00:1b.2: bridge window [io 0x3000-0x3fff] pci 0000:00:1b.2: bridge window [mem 0x81100000-0x811fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] pci_bus 0000:00: resource 20 [mem 0x80000000-0xdfffffff window] pci_bus 0000:00: resource 21 [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:00: resource 22 [mem 0xfc800000-0xfe7fffff window] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0x80000000-0x810fffff] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x6011ffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] pci_bus 0000:03: resource 1 [mem 0x81100000-0x811fffff] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.511089] PCI: CLS 64 bytes, default 64 [ 0.511153] Trying to unpack rootfs image as initramfs... [ 1.195901] Freeing initrd memory: 51912K [ 1.195928] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.195929] software IO TLB: mapped [mem 0x000000006b333000-0x000000006f333000] (64MB) [ 1.195999] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.196427] Initialise system trusted keyrings [ 1.196433] Key type blacklist registered [ 1.196463] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.197649] zbud: loaded [ 1.197785] integrity: Platform Keyring initialized [ 1.197787] Key type asymmetric registered [ 1.197788] Asymmetric key parser 'x509' registered [ 1.197794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.197823] io scheduler mq-deadline registered [ 1.198745] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.198758] efifb: probing for efifb [ 1.198772] efifb: framebuffer at 0x6000000000, using 3072k, total 3072k [ 1.198773] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 1.198774] efifb: scrolling: redraw [ 1.198775] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.198846] Console: switching to colour frame buffer device 128x48 [ 1.200013] fb0: EFI VGA frame buffer device [ 1.200024] intel_idle: MWAIT substates: 0x11142120 [ 1.200024] intel_idle: v0.5.1 model 0x9E [ 1.200376] intel_idle: Local APIC timer is reliable in all C-states [ 1.201636] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.201638] ACPI: Thermal Zone [TZ00] (28 C) [ 1.201822] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.202282] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.204273] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.204799] Linux agpgart interface v0.103 [ 1.204829] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.205253] i8042: PNP: No PS/2 controller found. [ 1.205352] mousedev: PS/2 mouse device common for all mice [ 1.205377] rtc_cmos rtc_cmos: RTC can wake from S4 [ 1.206398] rtc_cmos rtc_cmos: registered as rtc0 [ 1.206652] rtc_cmos rtc_cmos: setting system clock to 2023-05-29T06:38:23 UTC (1685342303) [ 1.206674] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 1.206680] intel_pstate: Intel P-state driver initializing [ 1.207055] intel_pstate: Disabling energy efficiency optimization [ 1.207056] intel_pstate: HWP enabled [ 1.207178] ledtrig-cpu: registered to indicate activity on CPUs [ 1.207496] NET: Registered protocol family 10 [ 1.213111] Segment Routing with IPv6 [ 1.213124] mip6: Mobile IPv6 [ 1.213125] NET: Registered protocol family 17 [ 1.213251] mpls_gso: MPLS GSO support [ 1.213801] microcode: sig=0x906ea, pf=0x2, revision=0xf0 [ 1.213925] microcode: Microcode Update Driver: v2.2. [ 1.213929] IPI shorthand broadcast: enabled [ 1.213937] sched_clock: Marking stable (1213263902, 465824)->(1219642205, -5912479) [ 1.214154] registered taskstats version 1 [ 1.214156] Loading compiled-in X.509 certificates [ 1.234152] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.234162] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 1.234177] zswap: loaded using pool lzo/zbud [ 1.234522] Key type .fscrypt registered [ 1.234523] Key type fscrypt-provisioning registered [ 1.234545] AppArmor: AppArmor sha1 policy hashing enabled [ 1.234883] integrity: Loading X.509 certificate: UEFI:db [ 1.234899] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.234900] integrity: Loading X.509 certificate: UEFI:db [ 1.234913] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.237349] Freeing unused decrypted memory: 2036K [ 1.237727] Freeing unused kernel image (initmem) memory: 2668K [ 1.276132] Write protecting the kernel read-only data: 22528k [ 1.277901] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 1.278516] Freeing unused kernel image (rodata/data gap) memory: 624K [ 1.351853] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.351854] x86/mm: Checking user space page tables [ 1.386128] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.386131] Run /init as init process [ 1.386132] with arguments: [ 1.386132] /init [ 1.386133] with environment: [ 1.386133] HOME=/ [ 1.386134] TERM=linux [ 1.386134] BOOT_IMAGE=/boot/vmlinuz-5.10.0-23-amd64 [ 1.446394] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 1.446430] ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.446486] ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.452349] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.452474] acpi PNP0C14:03: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:02) [ 1.453030] acpi PNP0C14:04: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:02) [ 1.453241] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.461073] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.462241] i2c i2c-0: 4/4 memory slots populated (from DMI) [ 1.463395] ACPI: Power Button [PWRF] pps_core: LinuxPPS API ver. 1 registered [ 1.463614] pps_core: Software ver. 5.3.6 - Copyright FAF7-631D Rodolfo Giometti <XXX@XXX> [ 1.465205] PTP clock support registered [ 1.465250] SCSI subsystem initialized [ 1.467522] ACPI: bus type USB registered [ 1.467536] usbcore: registered new interface driver usbfs [ 1.467540] usbcore: registered new interface driver hub [ 1.467547] usbcore: registered new device driver usb [ 1.472105] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 1.472678] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 1.473171] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 1.473710] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 1.473961] libata version 3.00 loaded. [ 1.477019] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.477023] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.477979] ahci 0000:00:17.0: version 3.0 [ 1.478084] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810 [ 1.478089] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.478188] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.478189] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst [ 1.478303] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.478305] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.478307] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.478331] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.478332] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.478333] usb usb1: Product: xHCI Host Controller [ 1.478333] usb usb1: Manufacturer: Linux 5.10.0-23-amd64 xhci-hcd [ 1.478334] usb usb1: SerialNumber: ... [ 1.478447] hub 1-0:1.0: USB hub found [ 1.478466] hub 1-0:1.0: 16 ports detected [ 1.479693] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 1.479694] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.479695] usb usb2: Product: xHCI Host Controller [ 1.479696] usb usb2: Manufacturer: Linux 5.10.0-23-amd64 xhci-hcd [ 1.479696] usb usb2: SerialNumber: ... [ 1.479777] hub 2-0:1.0: USB hub found [ 1.479792] hub 2-0:1.0: 10 ports detected [ 1.480199] usb: port power management may be unreliable [ 1.485566] e1000e: Intel(R) PRO/1000 Network Driver [ 1.485568] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.485596] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) [ 1.485775] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.548709] scsi host0: ahci [ 1.548952] scsi host1: ahci [ 1.549045] scsi host2: ahci [ 1.549131] scsi host3: ahci [ 1.549136] MXM: GUID detected in BIOS [ 1.549206] scsi host4: ahci [ 1.549281] scsi host5: ahci [ 1.549297] checking generic (6000000000 300000) vs hw (80000000 1000000) [ 1.549298] checking generic (6000000000 300000) vs hw (6000000000 10000000) [ 1.549299] fb0: switching to nouveaufb from EFI VGA [ 1.549329] ata1: SATA max UDMA/133 abar m2048@0x81222000 port 0x81222100 irq 124 [ 1.549331] ata2: SATA max UDMA/133 abar m2048@0x81222000 port 0x81222180 irq 124 [ 1.549332] ata3: SATA max UDMA/133 abar m2048@0x81222000 port 0x81222200 irq 124 [ 1.549334] ata4: SATA max UDMA/133 abar m2048@0x81222000 port 0x81222280 irq 124 [ 1.549335] ata5: SATA max UDMA/133 abar m2048@0x81222000 port 0x81222300 irq 124 [ 1.549336] ata6: SATA max UDMA/133 abar m2048@0x81222000 port 0x81222380 irq 124 [ 1.549364] ahci 0000:03:00.0: enabling device (0000 -> 0003) [ 1.549389] Console: switching to colour dummy device 80x25 [ 1.549412] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 1.549464] nouveau 0000:01:00.0: NVIDIA GM107 (117000a2) [ 1.559693] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.559695] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.560248] scsi host6: ahci [ 1.560459] scsi host7: ahci [ 1.560570] scsi host8: ahci [ 1.560666] scsi host9: ahci [ 1.560714] ata7: SATA max UDMA/133 abar m2048@0x81140000 port 0x81140100 irq 126 [ 1.560717] ata8: SATA max UDMA/133 abar m2048@0x81140000 port 0x81140180 irq 126 [ 1.560723] ata9: SATA max UDMA/133 abar m2048@0x81140000 port 0x81140200 irq 126 [ 1.560726] ata10: SATA max UDMA/133 abar m2048@0x81140000 port 0x81140280 irq 126 [ 1.569853] i915 0000:00:02.0: enabling device (0000 -> 0003) [ 1.572304] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin [ 1.579636] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 1.593798] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0 [ 1.618547] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 1.683066] nouveau 0000:01:00.0: bios: version XXX.XXX.XXX.XXX.29 [ 1.683698] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5 [ 1.683731] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 3e6684 [ IBUS ] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.744073] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.772292] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) XX:XX:XX:XX:XX:XX [ 1.772294] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.772426] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF [ 1.862869] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.863003] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.863035] ata4: SATA link down (SStatus 4 SControl 300) [ 1.863070] ata5: SATA link down (SStatus 4 SControl 300) [ 1.863126] ata6: SATA link down (SStatus 4 SControl 300) [ 1.863166] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.864460] ata1.00: supports DRM functions and may not be fully accessible [ 1.865040] ata1.00: disabling queued TRIM support [ 1.865042] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT03B6Q, max UDMA/133 [ 1.865043] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.866184] ata3.00: ATAPI: ASUS DRW-24B1ST i, 1.00, max UDMA/100 [ 1.866781] ata1.00: supports DRM functions and may not be fully accessible [ 1.867106] ata3.00: configured for UDMA/100 [ 1.867495] ata1.00: disabling queued TRIM support [ 1.869142] ata1.00: configured for UDMA/133 [ 1.869303] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 3B6Q PQ: 0 ANSI: 5 [ 1.874748] ata9: SATA link down (SStatus 0 SControl 300) [ 1.879015] ata8: SATA link down (SStatus 0 SControl 300) [ 1.894486] usb 1-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.14 [ 1.894487] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.894488] usb 1-1: Product: USB2.0 Hub [ 1.894489] usb 1-1: Manufacturer: VIA Labs, Inc. [ 1.894489] usb 1-1: SerialNumber: ... [ 1.895183] hub 1-1:1.0: USB hub found [ 1.895393] hub 1-1:1.0: 4 ports detected [ 1.909966] ata2.00: ATA-8: TOSHIBA MQ01ABF032, AM0P1D, max UDMA/100 [ 1.909967] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.911890] ata2.00: configured for UDMA/100 [ 1.912024] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 1D PQ: 0 ANSI: 5 [ 1.915682] scsi 2:0:0:0: CD-ROM ASUS DRW-24B1ST i 1.00 PQ: 0 ANSI: 5 [ 2.036088] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.037951] ata7.00: ATA-8: WL3000GSA6472E 1, MJ8OA5F0, max UDMA/133 [ 2.037953] ata7.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.039917] ata7.00: configured for UDMA/133 [ 2.040026] scsi 6:0:0:0: Direct-Access ATA WL3000GSA6472E A5F0 PQ: 0 ANSI: 5 [ 2.040066] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.040645] ata10.15: Port Multiplier 1.2, 0x197b:0x5755 r0, 5 ports, feat 0x5/0xf [ 2.041149] ahci 0000:03:00.0: FBS is enabled [ 2.041298] ata10.00: hard resetting link [ 2.208109] tsc: Refined TSC clocksource calibration: 2904.068 MHz [ 2.208112] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc4610b5b, max_idle_ns: 440795314888 ns [ 2.220035] clocksource: Switched to clocksource tsc [ 2.331833] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 2.356921] ahci 0000:03:00.0: FBS is disabled [ 2.376394] usb 2-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.14 [ 2.376396] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.376396] usb 2-1: Product: USB3.0 Hub [ 2.376397] usb 2-1: Manufacturer: VIA Labs, Inc. [ 2.376398] usb 2-1: SerialNumber: ... [ 2.378495] hub 2-1:1.0: USB hub found [ 2.378783] hub 2-1:1.0: 4 ports detected [ 2.500049] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 2.516054] ahci 0000:03:00.0: FBS is enabled [ 2.516618] ata10.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 2.516682] ata10.01: hard resetting link [ 2.650391] usb 1-2: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.14 [ 2.650392] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.650393] usb 1-2: Product: USB2.0 Hub [ 2.650394] usb 1-2: Manufacturer: VIA Labs, Inc. [ 2.650394] usb 1-2: SerialNumber: ... [ 2.651088] hub 1-2:1.0: USB hub found [ 2.651300] hub 1-2:1.0: 4 ports detected [ 2.833132] ahci 0000:03:00.0: FBS is disabled [ 2.992216] ahci 0000:03:00.0: FBS is enabled [ 2.992704] [TTM] Available graphics memory: 16366670 KiB [ 2.992705] [TTM] Zone dma32: Available graphics memory: 2097152 KiB [ 2.992705] [TTM] Initializing pool allocator [ 2.992709] [TTM] Initializing DMA pool allocator [ 2.992717] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB [ 2.992717] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 2.992719] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 2.992720] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 2.992721] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030 [ 2.992722] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000f00 00000000 [ 2.992723] nouveau 0000:01:00.0: DRM: DCB outp 02: 08011f82 00020010 [ 2.992724] nouveau 0000:01:00.0: DRM: DCB outp 03: 02822fa6 04420010 [ 2.992725] nouveau 0000:01:00.0: DRM: DCB outp 04: 02022f62 00020010 [ 2.992725] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030 [ 2.992726] nouveau 0000:01:00.0: DRM: DCB conn 01: 00010161 [ 2.992727] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002246 [ 2.992878] ata10.01: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 2.992905] ata10.02: hard resetting link [ 2.993035] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies [ 3.057083] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [ 3.110055] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x80000, bo 000000002a3485d3 [ 3.110147] fbcon: nouveaudrmfb (fb0) is primary device [ 3.115508] usb 2-2: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.14 [ 3.115509] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.115510] usb 2-2: Product: USB3.0 Hub [ 3.115510] usb 2-2: Manufacturer: VIA Labs, Inc. [ 3.115511] usb 2-2: SerialNumber: ... [ 3.117606] hub 2-2:1.0: USB hub found [ 3.117898] hub 2-2:1.0: 4 ports detected [ 3.244053] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd [ 3.308234] ahci 0000:03:00.0: FBS is disabled [ 3.332133] Console: switching to colour frame buffer device 240x67 [ 3.333265] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 3.352356] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1 [ 3.352358] nouveau 0000:01:00.0: DRM: Disabling PCI power management to avoid bug [ 3.398588] usb 1-1.4: New USB device found, idVendor=25a7, idProduct=fa67, bcdDevice= 7.10 [ 3.398590] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.398591] usb 1-1.4: Product: 2.4G Receiver [ 3.398593] usb 1-1.4: Manufacturer: CX [ 3.412670] hid: raw HID events driver (C) Jiri Kosina [ 3.468085] ahci 0000:03:00.0: FBS is enabled [ 3.468925] ata10.02: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 3.469015] ata10.03: hard resetting link [ 3.688075] usb 1-2.3: new high-speed USB device number 5 using xhci_hcd [ 3.780866] ahci 0000:03:00.0: FBS is disabled [ 3.837189] usb 1-2.3: New USB device found, idVendor=0e8d, idProduct=2008, bcdDevice= 2.23 [ 3.837195] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.837199] usb 1-2.3: Product: B130DL [ 3.837202] usb 1-2.3: Manufacturer: BLU [ 3.837206] usb 1-2.3: SerialNumber: ... [ 3.940086] ahci 0000:03:00.0: FBS is enabled [ 3.940650] ata10.03: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 3.940737] ata10.04: hard resetting link [ 4.253056] ahci 0000:03:00.0: FBS is disabled [ 4.412058] ahci 0000:03:00.0: FBS is enabled [ 4.412586] ata10.04: SATA link up 6.0 Gbps (SStatus 133 SControl 330) [ 4.414400] ata10.00: ATA-8: WL3000GSA6472E 1, MJ8OA5F0, max UDMA/133 [ 4.414401] ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 4.416366] ata10.00: configured for UDMA/133 [ 4.418197] ata10.01: ATA-8: WL3000GSA6472E 1, MJ8OA5F0, max UDMA/133 [ 4.418198] ata10.01: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 4.420134] ata10.01: configured for UDMA/133 [ 4.421940] ata10.02: ATA-8: WL3000GSA6472E 1, MJ8OA5F0, max UDMA/133 [ 4.421941] ata10.02: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 4.423809] ata10.02: configured for UDMA/133 [ 4.425615] ata10.03: ATA-8: WL3000GSA6472E 1, MJ8OA5D0, max UDMA/133 [ 4.425616] ata10.03: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 4.427528] ata10.03: configured for UDMA/133 [ 4.429340] ata10.04: ATA-8: WL3000GSA6472E 1, MJ8OA5F0, max UDMA/133 [ 4.429341] ata10.04: 5860533168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 4.431262] ata10.04: configured for UDMA/133 [ 4.431404] ata10: EH complete [ 4.431528] scsi 9:0:0:0: Direct-Access ATA WL3000GSA6472E A5F0 PQ: 0 ANSI: 5 [ 4.431759] scsi 9:1:0:0: Direct-Access ATA WL3000GSA6472E A5F0 PQ: 0 ANSI: 5 [ 4.431922] scsi 9:2:0:0: Direct-Access ATA WL3000GSA6472E A5F0 PQ: 0 ANSI: 5 [ 4.432061] scsi 9:3:0:0: Direct-Access ATA WL3000GSA6472E A5D0 PQ: 0 ANSI: 5 [ 4.432166] scsi 9:4:0:0: Direct-Access ATA WL3000GSA6472E A5F0 PQ: 0 ANSI: 5 [ 4.435913] e1000e 0000:00:1f.6 eno1: renamed from eth0 [ 4.437654] usbcore: registered new interface driver usbhid [ 4.437655] usbhid: USB HID core driver [ 4.439520] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:25A7:FA67.0001/input/input4 [ 4.441926] sd 6:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 4.441928] sd 6:0:0:0: [sdc] 4096-byte physical blocks [ 4.441932] sd 6:0:0:0: [sdc] Write Protect is off [ 4.441933] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 4.441941] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.441951] sd 9:1:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 4.441952] sd 9:1:0:0: [sde] 4096-byte physical blocks [ 4.441957] sd 9:1:0:0: [sde] Write Protect is off [ 4.441958] sd 9:1:0:0: [sde] Mode Sense: 00 3a 00 00 [ 4.442273] sd 9:2:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 4.442294] sd 9:2:0:0: [sdf] 4096-byte physical blocks [ 4.442315] sd 9:1:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.442323] sd 9:4:0:0: [sdh] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 4.442324] sd 9:4:0:0: [sdh] 4096-byte physical blocks [ 4.442329] sd 9:4:0:0: [sdh] Write Protect is off [ 4.442330] sd 9:4:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 4.442332] sd 9:3:0:0: [sdg] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 4.442333] sd 9:3:0:0: [sdg] 4096-byte physical blocks [ 4.442337] sd 9:3:0:0: [sdg] Write Protect is off [ 4.442338] sd 9:4:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.442338] sd 9:3:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 4.442345] sd 9:3:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.442354] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 4.442354] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 4.442357] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 4.442363] sd 1:0:0:0: [sdb] Write Protect is off [ 4.442364] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.442365] sd 0:0:0:0: [sda] Write Protect is off [ 4.442365] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.442377] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.442392] sd 9:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 4.442392] sd 9:0:0:0: [sdd] 4096-byte physical blocks [ 4.442407] sd 9:0:0:0: [sdd] Write Protect is off [ 4.442408] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.442409] sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.442416] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.442604] sd 9:2:0:0: [sdf] Write Protect is off [ 4.442605] sd 9:2:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 4.442618] sd 9:2:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.459728] sda: sda1 sda2 [ 4.463412] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 4.485444] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes [ 4.492983] sd 0:0:0:0: [sda] supports TCG Opal [ 4.492988] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.500226] hid-generic 0003:25A7:FA67.0001: input,hidraw0: USB HID v1.10 Keyboard [CX 2.4G Receiver] on usb-0000:00:14.0-1.4/input0 [ 4.500608] input: CX 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:25A7:FA67.0002/input/input5 [ 4.500770] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:25A7:FA67.0002/input/input6 [ 4.500832] input: CX 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:25A7:FA67.0002/input/input7 [ 4.512066] sdf: sdf1 sdf9 [ 4.512667] sdh: sdh1 sdh9 [ 4.528886] sd 9:4:0:0: [sdh] Attached SCSI removable disk [ 4.528923] sd 9:2:0:0: [sdf] Attached SCSI removable disk [ 4.529564] sdd: sdd1 sdd9 [ 4.530018] sde: sde1 sde9 [ 4.531018] sdg: sdg1 sdg9 [ 4.533594] sdc: sdc1 sdc2 [ 4.548556] sd 9:0:0:0: [sdd] Attached SCSI removable disk [ 4.548607] sd 9:1:0:0: [sde] Attached SCSI removable disk [ 4.548668] sd 9:3:0:0: [sdg] Attached SCSI removable disk [ 4.560188] input: CX 2.4G Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:25A7:FA67.0002/input/input8 [ 4.560587] hid-generic 0003:25A7:FA67.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [CX 2.4G Receiver] on usb-0000:00:14.0-1.4/input1 [ 4.569001] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 4.599290] sdb: sdb1 sdb9 [ 4.633184] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.684767] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.684773] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.760128] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 5.729146] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.766618] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 6.071677] fuse: init (API version 7.32) [ 6.077699] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 6.089299] RPC: Registered named UNIX socket transport module. [ 6.089301] RPC: Registered udp transport module. [ 6.089301] RPC: Registered tcp transport module. [ 6.089302] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.123919] Installing knfsd (copyright (C) 1996 XXX@XXX). [ 6.178542] intel_pmc_core INT33A1:00: initialized [ 6.188940] parport_pc 00:02: reported by Plug and Play ACPI [ 6.189022] parport0: PC-style at 0x378, irq 5 [PCSPP] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002) [ 6.248998] EDAC ie31200: No ECC support [ 6.249022] EDAC ie31200: No ECC support [ 6.249852] ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.250230] ee1004 0-0051: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.250458] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.250490] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 6.250602] ee1004 0-0052: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.250626] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ 6.250730] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 6.251053] ee1004 0-0053: 512 byte EE1004-compliant SPD EEPROM, read-only [ 6.251089] iTCO_vendor_support: vendor-support=0 [ 6.251136] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 6.251286] sd 9:0:0:0: Attached scsi generic sg4 type 0 [ 6.251327] sd 9:1:0:0: Attached scsi generic sg5 type 0 [ 6.251345] sd 9:2:0:0: Attached scsi generic sg6 type 0 [ 6.251361] sd 9:3:0:0: Attached scsi generic sg7 type 0 [ 6.251377] sd 9:4:0:0: Attached scsi generic sg8 type 0 [ 6.256253] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 6.270591] pstore: Using crash dump compression: deflate [ 6.270597] pstore: Registered efi as persistent store backend [ 6.273756] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 6.273828] iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 6.273906] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 6.303075] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 6.303076] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 6.303076] RAPL PMU: hw unit of domain package 2^-14 Joules [ 6.303077] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 6.303077] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 6.310491] cryptd: max_cpu_qlen set to 1000 [ 6.317459] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 6.323611] AVX2 version of gcm_enc/dec engaged. [ 6.323612] AES CTR mode by8 optimization enabled [ 6.344887] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 6.349464] ppdev: user-space parallel port driver [ 6.354087] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 6.354307] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.354665] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 6.354790] snd_hda_intel 0000:01:00.1: Disabling MSI [ 6.354794] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 6.397850] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau]) [ 6.403195] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11 [ 6.403253] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 6.403294] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 6.403330] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 6.403367] input: HDA NVidia HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 6.403420] input: HDA NVidia HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 6.419021] intel_rapl_common: Found RAPL domain package [ 6.419022] intel_rapl_common: Found RAPL domain core [ 6.419023] intel_rapl_common: Found RAPL domain uncore [ 6.419024] intel_rapl_common: Found RAPL domain dram [ 6.420159] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 6.420160] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.420161] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 6.420162] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 6.420163] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 6.420164] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 6.420164] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 6.420165] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 6.454168] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 6.454203] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 6.454239] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 6.454271] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 6.454302] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 6.454333] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 6.454361] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 [ 6.454389] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24 [ 6.454418] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 [ 6.454447] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 [ 6.454475] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27 [ 6.454506] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28 [ 6.455034] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input29 [ 6.564963] spl: loading out-of-tree module taints kernel. [ 6.565254] spl: module verification failed: signature and/or required key missing - tainting kernel [ 6.586941] znvpair: module license 'CDDL' taints kernel. [ 6.586949] Disabling lock debugging due to kernel taint [ 6.837983] ZFS: Loaded module v2.1.11-1~bpo11+1, ZFS pool version 5000, ZFS filesystem version 5 [ 11.147298] /dev/vmmon[1176]: Module vmmon: registered as misc device [ 11.147300] /dev/vmmon[1176]: Using tsc_khz as TSC frequency: 2904068 [ 11.147301] /dev/vmmon[1176]: Module vmmon: initialized [ 11.163756] Guest personality initialized and is inactive [ 11.163783] VMCI host device registered (name=vmci, major=10, minor=60) [ 11.163783] Initialized host personality [ 11.177255] NET: Registered protocol family 40 [ 12.361322] NFSD: Using UMH upcall client tracking operations. [ 12.361324] NFSD: starting 90-second grace period (net f0000098) [ 12.496803] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 12.873475] userif-2: sent link down event. [ 12.873477] userif-2: sent link up event. [ 14.250642] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.250691] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 14.450821] userif-2: sent link down event. [ 14.450823] userif-2: sent link up event. [ 16.299457] userif-2: sent link down event. [ 16.299459] userif-2: sent link up event. [ 1953.582562] i2c /dev entries driver [ 2193.269729] i2c /dev entries driver [ 2202.576300] drm_dp_i2c_do_msg: 44 callbacks suppressed [ 2825.685507] tun: Universal TUN/TAP device driver, 1.6 [ 2825.686503] virbr0: port 1(vnet0) entered blocking state [ 2825.686505] virbr0: port 1(vnet0) entered disabled state [ 2825.686544] device vnet0 entered promiscuous mode [ 2825.687490] virbr0: port 1(vnet0) entered blocking state [ 2825.687491] virbr0: port 1(vnet0) entered listening state [ 2825.800588] device-mapper: uevent: version 1.0.3 [ 2825.800651] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: XXX@XXX [ 2825.887443] userif-2: sent link down event. [ 2825.887451] userif-2: sent link up event. [ 2827.707543] virbr0: port 1(vnet0) entered learning state [ 2829.723434] virbr0: port 1(vnet0) entered forwarding state [ 2829.723435] virbr0: topology change detected, propagating [ 2829.923756] userif-2: sent link down event. [ 2829.923758] userif-2: sent link up event. [ 2848.327530] virbr0: port 1(vnet0) entered disabled state [ 2848.327930] device vnet0 left promiscuous mode [ 2848.327932] virbr0: port 1(vnet0) entered disabled state [ 2848.527626] userif-2: sent link down event. [ 2848.527634] userif-2: sent link up event. [ 3018.594965] virbr0: port 1(vnet1) entered blocking state [ 3018.594967] virbr0: port 1(vnet1) entered disabled state [ 3018.595009] device vnet1 entered promiscuous mode [ 3018.595081] virbr0: port 1(vnet1) entered blocking state [ 3018.595082] virbr0: port 1(vnet1) entered listening state [ 3018.795060] userif-2: sent link down event. [ 3018.795068] userif-2: sent link up event. [ 3020.629124] virbr0: port 1(vnet1) entered learning state [ 3022.641014] virbr0: port 1(vnet1) entered forwarding state [ 3022.641015] virbr0: topology change detected, propagating [ 3022.841356] userif-2: sent link down event. [ 3022.841358] userif-2: sent link up event. [ 3221.214159] usb 1-2.3: USB disconnect, device number 5 [ 3563.689544] userif-2: sent link down event. [ 3563.689552] userif-2: sent link up event. [ 3763.140119] virbr0: port 1(vnet1) entered disabled state [ 3763.140878] device vnet1 left promiscuous mode [ 3763.140886] virbr0: port 1(vnet1) entered disabled state [ 3763.339998] userif-2: sent link down event. [ 3763.340006] userif-2: sent link up event. [ 3764.129189] virbr0: port 1(vnet2) entered blocking state [ 3764.129190] virbr0: port 1(vnet2) entered disabled state [ 3764.129274] device vnet2 entered promiscuous mode [ 3764.129387] virbr0: port 1(vnet2) entered blocking state [ 3764.129388] virbr0: port 1(vnet2) entered listening state [ 3764.329354] userif-2: sent link down event. [ 3764.329363] userif-2: sent link up event. [ 3766.152235] virbr0: port 1(vnet2) entered learning state [ 3768.168134] virbr0: port 1(vnet2) entered forwarding state [ 3768.168135] virbr0: topology change detected, propagating [ 3768.368471] userif-2: sent link down event. [ 3768.368473] userif-2: sent link up event. [ 6197.501910] nouveau 0000:01:00.0: gr: TRAP ch 3 [007fa4f000 Xorg[2245]] nouveau 0000:01:00.0: gr: GPC0/TPC1/MP trap: global 00000004 [MULTIPLE_WARP_ERRORS] warp 3c000d [OOR_REG] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT] nouveau 0000:01:00.0: fifo: runlist 0: scheduled for recovery [ 6201.803021] nouveau 0000:01:00.0: fifo: channel 3: killed [ 6201.803025] nouveau 0000:01:00.0: fifo: engine 0: scheduled for recovery [ 6201.803333] nouveau 0000:01:00.0: Xorg[2245]: channel 3 killed!