[ 0.000000] Linux version 6.12.12+bpo-amd64 (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.12.12-1~bpo12+1 (2025-02-23) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdf04fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bdf05000-0x00000000be4e2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000be4e3000-0x00000000be8d5fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000be8d6000-0x00000000bee28fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bee29000-0x00000000bee29fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bee2a000-0x00000000bf02ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf030000-0x00000000bf452fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf453000-0x00000000bf7f3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7f4000-0x00000000bf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000063effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./990FX Extreme4, BIOS P2.70 06/05/2014 [ 0.000000] DMI: Memory slots populated: 4/4 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3093.368 MHz processor [ 0.002365] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002368] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.008680] AGP: No AGP bridge found [ 0.008739] last_pfn = 0x63f000 max_arch_pfn = 0x400000000 [ 0.008745] MTRR map: 8 entries (5 fixed + 3 variable; max 22), built from 9 variable MTRRs [ 0.008748] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010513] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved [ 0.010521] last_pfn = 0xbf800 max_arch_pfn = 0x400000000 [ 0.015968] found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf] Using GB pages for direct mapping [ 0.017310] RAMDISK: [mem 0x283ab000-0x301ccfff] ACPI: Early table checksum verification disabled [ 0.017322] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA) [ 0.017327] ACPI: XSDT 0x00000000BE8C5070 000064 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017333] ACPI: FACP 0x00000000BE8CB5F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.017338] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20240827/tbfadt-611) [ 0.017343] ACPI: DSDT 0x00000000BE8C5170 006483 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.017347] ACPI: FACS 0x00000000BE8CF080 000040 [ 0.017350] ACPI: APIC 0x00000000BE8CB708 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.017353] ACPI: FPDT 0x00000000BE8CB7A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.017357] ACPI: MCFG 0x00000000BE8CB7F0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.017360] ACPI: AAFT 0x00000000BE8CB830 00008A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.017364] ACPI: HPET 0x00000000BE8CB8C0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.017367] ACPI: SSDT 0x00000000BE8CB8F8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.017371] ACPI: BGRT 0x00000000BE8CD010 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.017374] ACPI: Reserving FACP table memory at [mem 0xbe8cb5f8-0xbe8cb703] ACPI: Reserving DSDT table memory at [mem 0xbe8c5170-0xbe8cb5f2] ACPI: Reserving FACS table memory at [mem 0xbe8cf080-0xbe8cf0bf] ACPI: Reserving APIC table memory at [mem 0xbe8cb708-0xbe8cb7a5] ACPI: Reserving FPDT table memory at [mem 0xbe8cb7a8-0xbe8cb7eb] ACPI: Reserving MCFG table memory at [mem 0xbe8cb7f0-0xbe8cb82b] ACPI: Reserving AAFT table memory at [mem 0xbe8cb830-0xbe8cb8b9] ACPI: Reserving HPET table memory at [mem 0xbe8cb8c0-0xbe8cb8f7] ACPI: Reserving SSDT table memory at [mem 0xbe8cb8f8-0xbe8cd00b] ACPI: Reserving BGRT table memory at [mem 0xbe8cd010-0xbe8cd047] No NUMA configuration found [ 0.017456] Faking a node at [mem 0x0000000000000000-0x000000063effffff] NODE_DATA(0) allocated [mem 0x63efd3680-0x63effdfff] Zone ranges: [ 0.017832] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000063effffff] Device empty [ 0.017839] Movable zone start for each node [ 0.017842] Early memory node ranges [ 0.017843] node 0: [mem 0x0000000000001000-0x0000000000099fff] node 0: [mem 0x0000000000100000-0x00000000bdf04fff] node 0: [mem 0x00000000bee29000-0x00000000bee29fff] node 0: [mem 0x00000000bf030000-0x00000000bf452fff] node 0: [mem 0x00000000bf7f4000-0x00000000bf7fffff] node 0: [mem 0x0000000100001000-0x000000063effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000063effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.017903] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027740] On node 0, zone DMA32: 3876 pages in unavailable ranges [ 0.027767] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.027782] On node 0, zone DMA32: 929 pages in unavailable ranges [ 0.028714] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.028780] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.029007] ACPI: PM-Timer IO Port: 0x808 [ 0.029017] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.029025] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.029029] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.029031] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.029033] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.029038] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.029039] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.029049] CPU topo: Max. logical packages: 1 [ 0.029050] CPU topo: Max. logical dies: 1 [ 0.029050] CPU topo: Max. dies per package: 1 [ 0.029056] CPU topo: Max. threads per core: 1 [ 0.029057] CPU topo: Num. cores per package: 8 [ 0.029058] CPU topo: Num. threads per package: 8 [ 0.029059] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.029078] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xbdf05000-0xbe4e2fff] PM: hibernation: Registered nosave memory: [mem 0xbe4e3000-0xbe8d5fff] PM: hibernation: Registered nosave memory: [mem 0xbe8d6000-0xbee28fff] PM: hibernation: Registered nosave memory: [mem 0xbee2a000-0xbf02ffff] PM: hibernation: Registered nosave memory: [mem 0xbf453000-0xbf7f3fff] PM: hibernation: Registered nosave memory: [mem 0xbf800000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec1ffff] PM: hibernation: Registered nosave memory: [mem 0xfec20000-0xfec20fff] PM: hibernation: Registered nosave memory: [mem 0xfec21000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed60fff] PM: hibernation: Registered nosave memory: [mem 0xfed61000-0xfed70fff] PM: hibernation: Registered nosave memory: [mem 0xfed71000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfeefffff] PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xffffffff] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x100000fff] [mem 0xbf800000-0xfebfffff] available for PCI devices [ 0.029109] Booting paravirtualized kernel on bare hardware [ 0.029111] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.034678] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.035787] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288 [ 0.035796] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152 [ 0.035799] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 [ 0.035822] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 root=UUID=HASH_568-82B8-100D-ADB6-3120FA883512 ro quiet [ 0.035874] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64", will be passed to user space. [ 0.042510] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.045810] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.045905] Fallback order for Node 0: 0 [ 0.045910] Built 1 zonelists, mobility grouping on. Total pages: 6279885 [ 0.045911] Policy zone: Normal [ 0.045922] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.045924] AGP: Checking aperture... [ 0.052227] AGP: No AGP bridge found [ 0.052229] AGP: Node 0: aperture [bus addr 0xb8000000-0xb9ffffff] (32MB) [ 0.052231] Aperture pointing to e820 RAM. Ignoring. [ 0.052232] AGP: Your BIOS doesn't leave an aperture memory hole [ 0.052232] AGP: Please enable the IOMMU option in the BIOS setup [ 0.052233] AGP: This costs you 64MB of RAM [ 0.052236] AGP: Mapping aperture over RAM [mem 0xb8000000-0xbbffffff] (65536KB) [ 0.052239] PM: hibernation: Registered nosave memory: [mem 0xb8000000-0xbbffffff] software IO TLB: area num 8. [ 0.108332] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.108548] ftrace: allocating 45541 entries in 178 pages [ 0.122442] ftrace: allocated 178 pages with 4 groups [ 0.123681] Dynamic Preempt: voluntary [ 0.123927] rcu: Preemptible hierarchical RCU implementation. [ 0.123929] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.123930] Trampoline variant of Tasks RCU enabled. [ 0.123931] Rude variant of Tasks RCU enabled. [ 0.123931] Tracing variant of Tasks RCU enabled. [ 0.123932] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.123933] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.123943] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.123946] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.123949] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.129323] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16 [ 0.129543] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.129644] spurious 8259A interrupt: IRQ7. [ 0.132975] Console: colour VGA+ 80x25 [ 0.132978] printk: legacy console [tty0] enabled [ 0.133246] ACPI: Core revision 20240827 [ 0.133416] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.133430] APIC: Switch to symmetric I/O mode setup [ 0.133804] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.153430] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c96cf0424d, max_idle_ns: 440795346919 ns [ 0.153438] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.73 BogoMIPS (lpj=12373472) [ 0.153470] LVT offset 1 assigned for vector 0xf9 [ 0.153476] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.153478] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.153484] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.153486] Spectre V2 : Mitigation: Retpolines [ 0.153487] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.153489] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.153490] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.153491] RETBleed: Mitigation: untrained return thunk [ 0.153493] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.153495] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.153500] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.153502] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.153503] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.153505] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.153507] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.185675] Freeing SMP alternatives memory: 40K [ 0.185683] pid_max: default: 32768 minimum: 301 [ 0.186534] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm [ 0.186893] landlock: Up and running. [ 0.186895] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.187030] AppArmor: AppArmor initialized [ 0.187068] TOMOYO Linux initialized [ 0.187385] LSM support for eBPF active [ 0.187806] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.187892] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.297810] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (family: 0x15, model: 0x1, stepping: 0x2) [ 0.298207] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.298235] ... version: 0 [ 0.298237] ... bit width: 48 [ 0.298238] ... generic registers: 6 [ 0.298239] ... value mask: 0000ffffffffffff [ 0.298240] ... max period: 00007fffffffffff [ 0.298242] ... fixed-purpose events: 0 [ 0.298243] ... event mask: 000000000000003f [ 0.298363] signal: max sigframe size: 1776 [ 0.298430] rcu: Hierarchical SRCU implementation. [ 0.298431] rcu: Max phase no-delay instances is 1000. [ 0.298506] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.303783] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.303933] smp: Bringing up secondary CPUs ... [ 0.304131] smpboot: x86: Booting SMP configuration: [ 0.304133] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.333494] smp: Brought up 1 node, 8 CPUs [ 0.333494] smpboot: Total of 8 processors activated (49493.88 BogoMIPS) [ 0.393526] node 0 deferred pages initialised in 56ms [ 0.393538] Memory: 24360180K/25119540K available (16384K kernel code, 2484K rwdata, 11636K rodata, 4220K init, 5000K bss, 751492K reserved, 0K cma-reserved) [ 0.394733] devtmpfs: initialized [ 0.394733] x86/mm: Memory block size: 128MB [ 0.398891] ACPI: PM: Registering ACPI NVS region [mem 0xbe4e3000-0xbe8d5fff] (4141056 bytes) [ 0.398891] ACPI: PM: Registering ACPI NVS region [mem 0xbee2a000-0xbf02ffff] (2121728 bytes) [ 0.398891] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.398891] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.398891] pinctrl core: initialized pinctrl subsystem [ 0.399504] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.401853] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.402567] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.403318] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.403365] thermal_sys: Registered thermal governor 'fair_share' [ 0.403365] thermal_sys: Registered thermal governor 'bang_bang' [ 0.403365] thermal_sys: Registered thermal governor 'step_wise' [ 0.403365] thermal_sys: Registered thermal governor 'user_space' [ 0.403365] thermal_sys: Registered thermal governor 'power_allocator' [ 0.403365] cpuidle: using governor ladder [ 0.403365] cpuidle: using governor menu [ 0.403365] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.403365] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: not using ECAM ([mem 0xe0000000-0xefffffff] not reserved) [ 0.403365] PCI: Using configuration type 1 for base access [ 0.403365] PCI: Using configuration type 1 for extended access [ 0.403365] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.403365] mtrr: probably your BIOS does not setup all CPUs. [ 0.403365] mtrr: corrected configuration. [ 0.403365] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.406952] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.406952] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.406952] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.406952] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.409772] ACPI: Added _OSI(Module Device) [ 0.409772] ACPI: Added _OSI(Processor Device) [ 0.409772] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.409772] ACPI: Added _OSI(Processor Aggregator Device) [ 0.414390] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.429694] ACPI: Interpreter enabled [ 0.429717] ACPI: PM: (supports S0 S3 S4 S5) [ 0.429719] ACPI: Using IOAPIC for interrupt routing [ 0.429870] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource [ 0.429925] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.429927] PCI: Using E820 reservations for host bridge windows [ 0.430068] ACPI: Enabled 8 GPEs in block 00 to 1F [ 0.438170] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.438177] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] PCI host bridge to bus 0000:00 [ 0.438551] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 conventional PCI endpoint [ 0.438718] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 PCIe Root Port [ 0.438731] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:02.0: enabling Extended Tags [ 0.438777] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.438881] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 PCIe Root Port [ 0.438893] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:04.0: enabling Extended Tags [ 0.438933] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.439024] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400 PCIe Root Port [ 0.439036] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:05.0: enabling Extended Tags [ 0.439074] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.439169] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 PCIe Root Port [ 0.439182] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:06.0: enabling Extended Tags [ 0.439219] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.439312] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.439324] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:09.0: enabling Extended Tags [ 0.439387] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.439484] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.439497] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:0a.0: enabling Extended Tags [ 0.439536] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.439636] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.439654] pci 0000:00:11.0: BAR 0 [io 0xf090-0xf097] pci 0000:00:11.0: BAR 1 [io 0xf080-0xf083] pci 0000:00:11.0: BAR 2 [io 0xf070-0xf077] pci 0000:00:11.0: BAR 3 [io 0xf060-0xf063] pci 0000:00:11.0: BAR 4 [io 0xf050-0xf05f] pci 0000:00:11.0: BAR 5 [mem 0xfeb0b000-0xfeb0b3ff] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.439813] pci 0000:00:12.0: BAR 0 [mem 0xfeb0a000-0xfeb0afff] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.439968] pci 0000:00:12.2: BAR 0 [mem 0xfeb09000-0xfeb090ff] pci 0000:00:12.2: supports D1 D2 [ 0.440031] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.440117] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.440132] pci 0000:00:13.0: BAR 0 [mem 0xfeb08000-0xfeb08fff] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.440268] pci 0000:00:13.2: BAR 0 [mem 0xfeb07000-0xfeb070ff] pci 0000:00:13.2: supports D1 D2 [ 0.440331] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.440419] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.440548] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.440585] pci 0000:00:14.1: BAR 0 [io 0xf040-0xf047] pci 0000:00:14.1: BAR 1 [io 0xf030-0xf033] pci 0000:00:14.1: BAR 2 [io 0xf020-0xf027] pci 0000:00:14.1: BAR 3 [io 0xf010-0xf013] pci 0000:00:14.1: BAR 4 [io 0xf000-0xf00f] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.440633] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.440635] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.440636] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.440729] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 conventional PCI endpoint [ 0.440746] pci 0000:00:14.2: BAR 0 [mem 0xfeb00000-0xfeb03fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.440882] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.441024] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.441049] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.441055] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.441169] pci 0000:00:14.5: BAR 0 [mem 0xfeb06000-0xfeb06fff] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.441307] pci 0000:00:16.0: BAR 0 [mem 0xfeb05000-0xfeb05fff] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.441447] pci 0000:00:16.2: BAR 0 [mem 0xfeb04000-0xfeb040ff] pci 0000:00:16.2: supports D1 D2 [ 0.441510] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.441602] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.441659] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.441712] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.441765] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.441824] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.441885] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.441983] pci 0000:01:00.0: [1002:6fdf] type 00 class 0x030000 PCIe Legacy Endpoint [ 0.441998] pci 0000:01:00.0: BAR 0 [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:01:00.0: BAR 2 [mem 0xd0000000-0xd01fffff 64bit pref] pci 0000:01:00.0: BAR 4 [io 0xe000-0xe0ff] pci 0000:01:00.0: BAR 5 [mem 0xfea00000-0xfea3ffff] pci 0000:01:00.0: ROM [mem 0xfea40000-0xfea5ffff pref] pci 0000:01:00.0: enabling Extended Tags [ 0.442062] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: supports D1 D2 [ 0.442112] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.442171] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.442258] pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300 PCIe Legacy Endpoint [ 0.442273] pci 0000:01:00.1: BAR 0 [mem 0xfea60000-0xfea63fff 64bit] pci 0000:01:00.1: enabling Extended Tags [ 0.442347] pci 0000:01:00.1: supports D1 D2 [ 0.442439] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:02:00.0: [1b4b:9120] type 00 class 0x010601 PCIe Legacy Endpoint [ 0.442495] pci 0000:02:00.0: BAR 0 [io 0xd090-0xd097] pci 0000:02:00.0: BAR 1 [io 0xd080-0xd083] pci 0000:02:00.0: BAR 2 [io 0xd070-0xd077] pci 0000:02:00.0: BAR 3 [io 0xd060-0xd063] pci 0000:02:00.0: BAR 4 [io 0xd050-0xd05f] pci 0000:02:00.0: BAR 5 [mem 0xfe915000-0xfe9157ff] pci 0000:02:00.0: ROM [mem 0xfe900000-0xfe90ffff pref] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 [ 0.442572] pci 0000:02:00.0: PME# supported from D3hot [ 0.442650] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.442720] pci 0000:03:00.0: BAR 0 [mem 0xfe800000-0xfe807fff 64bit] pci 0000:03:00.0: enabling Extended Tags [ 0.442806] pci 0000:03:00.0: supports D1 D2 [ 0.442808] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.442907] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330 PCIe Endpoint [ 0.442971] pci 0000:04:00.0: BAR 0 [mem 0xfe700000-0xfe707fff 64bit] pci 0000:04:00.0: enabling Extended Tags [ 0.443077] pci 0000:04:00.0: supports D1 D2 [ 0.443079] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.443176] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010 PCIe Endpoint [ 0.443265] pci 0000:05:00.0: BAR 0 [mem 0xfe610000-0xfe6107ff 64bit] pci 0000:05:00.0: BAR 2 [io 0xc000-0xc0ff] pci 0000:05:00.0: supports D2 [ 0.443354] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.443469] pci 0000:05:00.1: [1106:0415] type 00 class 0x010185 PCIe Legacy Endpoint [ 0.443485] pci 0000:05:00.1: BAR 0 [io 0xc140-0xc147] pci 0000:05:00.1: BAR 1 [io 0xc130-0xc133] pci 0000:05:00.1: BAR 2 [io 0xc120-0xc127] pci 0000:05:00.1: BAR 3 [io 0xc110-0xc113] pci 0000:05:00.1: BAR 4 [io 0xc100-0xc10f] pci 0000:05:00.1: ROM [mem 0xfe600000-0xfe60ffff pref] pci 0000:05:00.1: supports D2 [ 0.443589] pci 0000:05:00.1: PME# supported from D2 D3hot D3cold [ 0.449461] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:06:00.0: [14e4:16b1] type 00 class 0x020000 PCIe Endpoint [ 0.449547] pci 0000:06:00.0: BAR 0 [mem 0xd0310000-0xd031ffff 64bit pref] pci 0000:06:00.0: BAR 2 [mem 0xd0300000-0xd030ffff 64bit pref] pci 0000:06:00.0: ROM [mem 0xfe500000-0xfe5007ff pref] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.449815] pci 0000:00:0a.0: PCI bridge to [bus 06] pci_bus 0000:07: extended config space not accessible [ 0.449867] pci 0000:07:06.0: [1131:7133] type 00 class 0x048000 conventional PCI endpoint [ 0.449885] pci 0000:07:06.0: BAR 0 [mem 0xfe400000-0xfe4007ff] pci 0000:07:06.0: supports D1 D2 [ 0.450041] pci 0000:00:14.4: PCI bridge to [bus 07] (subtractive decode) [ 0.450048] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.450051] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.450053] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.450055] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.450057] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 0.450059] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode) [ 0.450739] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.450804] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.450869] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.450933] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.450986] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.451028] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.451070] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.451113] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.451308] iommu: Default domain type: Translated [ 0.451308] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.451308] pps_core: LinuxPPS API ver. 1 registered [ 0.451308] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.451308] PTP clock support registered [ 0.451308] EDAC MC: Ver: 3.0.0 [ 0.451308] NetLabel: Initializing [ 0.451308] NetLabel: domain hash size = 128 [ 0.451308] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.451308] NetLabel: unlabeled traffic allowed by default [ 0.451308] PCI: Using ACPI for IRQ routing [ 0.458369] PCI: pci_cache_line_size set to 64 bytes [ 0.458431] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff] e820: reserve RAM buffer [mem 0xbdf05000-0xbfffffff] e820: reserve RAM buffer [mem 0xbee2a000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf453000-0xbfffffff] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff] e820: reserve RAM buffer [mem 0x63f000000-0x63fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.458463] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.458463] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.458463] vgaarb: loaded [ 0.458463] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.458463] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.459599] clocksource: Switched to clocksource tsc-early [ 0.459607] VFS: Disk quotas dquot_6.6.0 [ 0.459607] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.459607] AppArmor: AppArmor Filesystem Enabled [ 0.459607] pnp: PnP ACPI init [ 0.459607] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.459607] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.459607] system 00:03: [io 0x040b] has been reserved [ 0.459607] system 00:03: [io 0x04d6] has been reserved [ 0.459607] system 00:03: [io 0x0c00-0x0c01] has been reserved [ 0.459607] system 00:03: [io 0x0c14] has been reserved [ 0.459607] system 00:03: [io 0x0c50-0x0c51] has been reserved [ 0.459607] system 00:03: [io 0x0c52] has been reserved [ 0.459607] system 00:03: [io 0x0c6c] has been reserved [ 0.459607] system 00:03: [io 0x0c6f] has been reserved [ 0.459607] system 00:03: [io 0x0cd0-0x0cd1] has been reserved [ 0.459607] system 00:03: [io 0x0cd2-0x0cd3] has been reserved [ 0.459607] system 00:03: [io 0x0cd4-0x0cd5] has been reserved [ 0.459607] system 00:03: [io 0x0cd6-0x0cd7] has been reserved [ 0.459607] system 00:03: [io 0x0cd8-0x0cdf] has been reserved [ 0.459607] system 00:03: [io 0x0800-0x089f] has been reserved [ 0.459607] system 00:03: [io 0x0b20-0x0b3f] has been reserved [ 0.459607] system 00:03: [io 0x0900-0x090f] has been reserved [ 0.459607] system 00:03: [io 0x0910-0x091f] has been reserved [ 0.459607] system 00:03: [io 0xfe00-0xfefe] has been reserved [ 0.459607] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.459607] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.459607] system 00:03: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.459607] system 00:03: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.459607] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.459607] system 00:03: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.459607] system 00:03: [mem 0xffc00000-0xffffffff] has been reserved [ 0.459607] system 00:04: [io 0x0290-0x029f] has been reserved [ 0.459719] pnp 00:05: [dma 2] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.460220] pnp 00:09: [dma 0 disabled] pnp: PnP ACPI: found 10 devices [ 0.467619] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.467915] NET: Registered PF_INET protocol family [ 0.468293] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.487510] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.487572] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.487924] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.488564] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.488873] TCP: Hash tables configured (established 262144 bind 65536) [ 0.489196] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.489380] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.489519] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.489662] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.489676] NET: Registered PF_XDP protocol family [ 0.489700] pci 0000:00:02.0: PCI bridge to [bus 01] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] pci 0000:00:05.0: PCI bridge to [bus 03] pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:00:06.0: PCI bridge to [bus 04] pci 0000:00:06.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 05] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:0a.0: PCI bridge to [bus 06] pci 0000:00:0a.0: bridge window [mem 0xfe500000-0xfe5fffff] pci 0000:00:0a.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 07] pci 0000:00:14.4: bridge window [mem 0xfe400000-0xfe4fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] pci_bus 0000:05: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:06: resource 1 [mem 0xfe500000-0xfe5fffff] pci_bus 0000:06: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref] pci_bus 0000:07: resource 1 [mem 0xfe400000-0xfe4fffff] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] pci_bus 0000:07: resource 9 [mem 0xc0000000-0xffffffff window] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7d0 took 19954 usecs [ 0.526313] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7d0 took 15447 usecs [ 0.542310] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7d0 took 15421 usecs [ 0.558310] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x7d0 took 15613 usecs [ 0.558561] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.558912] PCI: CLS 64 bytes, default 64 [ 0.559013] Trying to unpack rootfs image as initramfs... [ 0.559711] PCI-DMA: Disabling AGP. [ 0.559806] PCI-DMA: aperture base @ b8000000 size 65536 KB [ 0.559809] PCI-DMA: using GART IOMMU. [ 0.559811] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.560688] software IO TLB: tearing down default memory pool [ 0.565462] LVT offset 0 assigned for vector 0x400 [ 0.567659] perf: AMD IBS detected (0x000000ff) [ 0.568047] amd_uncore: 4 amd_nb counters detected [ 0.568972] Initialise system trusted keyrings [ 0.568994] Key type blacklist registered [ 0.569098] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 0.569117] zbud: loaded [ 0.569602] fuse: init (API version 7.41) [ 0.570002] integrity: Platform Keyring initialized [ 0.570016] integrity: Machine keyring initialized [ 0.597810] Key type asymmetric registered [ 0.597815] Asymmetric key parser 'x509' registered [ 1.572205] tsc: Refined TSC clocksource calibration: 3093.305 MHz [ 1.572228] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9692d4021, max_idle_ns: 440795216934 ns [ 1.572266] clocksource: Switched to clocksource tsc [ 1.653468] Freeing initrd memory: 129160K [ 1.660120] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.660187] io scheduler mq-deadline registered [ 1.662331] ledtrig-cpu: registered to indicate activity on CPUs [ 1.663189] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.664303] Could not retrieve perf counters (-19) [ 1.664615] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.664804] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.665665] Linux agpgart interface v0.103 [ 1.666567] i8042: PNP: No PS/2 controller found. [ 1.666647] mousedev: PS/2 mouse device common for all mice [ 1.666674] rtc_cmos 00:06: RTC can wake from S4 [ 1.666899] rtc_cmos 00:06: registered as rtc0 [ 1.666922] rtc_cmos 00:06: setting system clock to 2025-03-30T03:03:55 UTC (1743303835) [ 1.666957] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.666968] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.667523] NET: Registered PF_INET6 protocol family [ 1.673997] Segment Routing with IPv6 [ 1.674016] In-situ OAM (IOAM) with IPv6 [ 1.674041] mip6: Mobile IPv6 [ 1.674046] NET: Registered PF_PACKET protocol family [ 1.674143] mpls_gso: MPLS GSO support [ 1.674157] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.674651] microcode: Current revision: 0x0600063e [ 1.674654] microcode: Updated early from: 0x06000626 [ 1.674819] IPI shorthand broadcast: enabled [ 1.677507] sched_clock: Marking stable (1672015403, 3870487)->(1695490116, -19604226) [ 1.677824] registered taskstats version 1 [ 1.677994] Loading compiled-in X.509 certificates [ 1.705669] Loaded X.509 cert 'Build time autogenerated kernel key: d2b9f7780b4c1a61ac47e8fa2c108e2eb11543ec' [ 1.708296] Demotion targets for Node 0: null [ 1.708464] Key type .fscrypt registered [ 1.708466] Key type fscrypt-provisioning registered [ 1.733572] Key type encrypted registered [ 1.733579] AppArmor: AppArmor sha256 policy hashing enabled [ 1.733589] ima: No TPM chip found, activating TPM-bypass! [ 1.733592] ima: Allocated hash algorithm: sha256 [ 1.733604] ima: No architecture policies found [ 1.733620] evm: Initialising EVM extended attributes: [ 1.733621] evm: security.selinux [ 1.733626] evm: security.SMACK64 (disabled) [ 1.733627] evm: security.SMACK64EXEC (disabled) [ 1.733628] evm: security.SMACK64TRANSMUTE (disabled) [ 1.733629] evm: security.SMACK64MMAP (disabled) [ 1.733630] evm: security.apparmor [ 1.733631] evm: security.ima [ 1.733632] evm: security.capability [ 1.733633] evm: HMAC attrs: 0x1 [ 1.735276] RAS: Correctable Errors collector initialized. [ 1.754214] clk: Disabling unused clocks [ 1.754220] PM: genpd: Disabling unused power domains [ 1.773069] Freeing unused decrypted memory: 2028K [ 1.774279] Freeing unused kernel image (initmem) memory: 4220K [ 1.774314] Write protecting the kernel read-only data: 28672k [ 1.774757] Freeing unused kernel image (rodata/data gap) memory: 652K [ 1.841700] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.841705] Run /init as init process [ 1.841706] with arguments: [ 1.841708] /init [ 1.841709] with environment: [ 1.841710] HOME=/ [ 1.841711] TERM=linux [ 1.841712] BOOT_IMAGE=/boot/vmlinuz-6.12.12+bpo-amd64 [ 1.982135] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.982175] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.990041] Floppy drive(s): fd0 is 1.44M [ 2.001235] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.001248] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 2.001489] ACPI: button: Power Button [PWRF] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 2.002709] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 2.004276] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 2.005014] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 2.005102] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.011122] FDC 0 is a post-1991 82077 [ 2.020279] SCSI subsystem initialized [ 2.033354] ACPI: bus type USB registered [ 2.033826] usbcore: registered new interface driver usbfs [ 2.033848] usbcore: registered new interface driver hub [ 2.033879] usbcore: registered new device driver usb [ 2.064797] ACPI: bus type drm_connector registered [ 2.075943] libata version 3.00 loaded. [ 2.077027] tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address A7EC84DFAC90EAD99498CB063DC54969 [ 2.077035] tg3 0000:06:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.077039] tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:06:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] pata_via 0000:05:00.1: version 0.3.4 [ 2.079806] scsi host0: pata_atiixp [ 2.080169] scsi host1: pata_via [ 2.080588] scsi host2: pata_atiixp [ 2.080692] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 lpm-pol 0 [ 2.080696] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 lpm-pol 0 [ 2.081097] QUIRK: Enable AMD PLL fix [ 2.081143] scsi host3: pata_via [ 2.081204] ata3: PATA max UDMA/133 cmd 0xc140 ctl 0xc130 bmdma 0xc100 irq 34 lpm-pol 0 [ 2.081207] ata4: PATA max UDMA/133 cmd 0xc120 ctl 0xc110 bmdma 0xc108 irq 34 lpm-pol 0 [ 2.081296] ehci-pci 0000:00:16.2: EHCI Host Controller [ 2.081310] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 1 [ 2.081316] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.081325] ehci-pci 0000:00:16.2: debug port 1 [ 2.081365] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 2.082072] tg3 0000:06:00.0 enp6s0: renamed from eth0 [ 2.096014] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.096136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.096140] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.096143] usb usb1: Product: EHCI Host Controller [ 2.096144] usb usb1: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.096146] usb usb1: SerialNumber: ... [ 2.096300] hub 1-0:1.0: USB hub found [ 2.096310] hub 1-0:1.0: 4 ports detected [ 2.096534] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.096542] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 2.096548] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.096558] ehci-pci 0000:00:12.2: debug port 1 [ 2.096596] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 2.111985] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.112128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.112132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.112134] usb usb2: Product: EHCI Host Controller [ 2.112136] usb usb2: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.112138] usb usb2: SerialNumber: ... [ 2.112271] hub 2-0:1.0: USB hub found [ 2.112281] hub 2-0:1.0: 5 ports detected [ 2.112479] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.112485] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 2.112489] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.112497] ehci-pci 0000:00:13.2: debug port 1 [ 2.112524] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 2.127990] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.128090] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.128093] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.128096] usb usb3: Product: EHCI Host Controller [ 2.128098] usb usb3: Manufacturer: Linux 6.12.12+bpo-amd64 ehci_hcd [ 2.128100] usb usb3: SerialNumber: ... [ 2.128246] hub 3-0:1.0: USB hub found [ 2.128258] hub 3-0:1.0: 5 ports detected [ 2.140054] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11 [ 2.248327] ata1.00: ATA-10: KINGSTON SA400S37240G, SBFKB1H5, max UDMA/133 [ 2.248333] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.248338] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2.249075] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 B1H5 PQ: 0 ANSI: 5 [ 2.363989] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.375980] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 2.408048] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.408056] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 2.408087] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 2.408171] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.408185] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.408242] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 2.408419] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.408424] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6 [ 2.408427] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed [ 2.408490] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.408494] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.408496] usb usb5: Product: xHCI Host Controller [ 2.408498] usb usb5: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.408500] usb usb5: SerialNumber: ... [ 2.408663] hub 5-0:1.0: USB hub found [ 2.408676] hub 5-0:1.0: 2 ports detected [ 2.408848] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.408887] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.408890] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.408892] usb usb6: Product: xHCI Host Controller [ 2.408894] usb usb6: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.408896] usb usb6: SerialNumber: ... [ 2.409076] hub 6-0:1.0: USB hub found [ 2.409088] hub 6-0:1.0: 2 ports detected [ 2.409482] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.409488] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 2.409536] xhci_hcd 0000:04:00.0: hcc params 0x040050af hci version 0x100 quirks 0x0002010000080090 [ 2.409693] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 2.409697] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8 [ 2.409700] xhci_hcd 0000:04:00.0: Host supports USB 3.0 SuperSpeed [ 2.409750] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 2.409753] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.409755] usb usb7: Product: xHCI Host Controller [ 2.409757] usb usb7: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.409759] usb usb7: SerialNumber: ... [ 2.409886] hub 7-0:1.0: USB hub found [ 2.409897] hub 7-0:1.0: 2 ports detected [ 2.410040] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.410076] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12 [ 2.410079] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.410081] usb usb8: Product: xHCI Host Controller [ 2.410083] usb usb8: Manufacturer: Linux 6.12.12+bpo-amd64 xhci-hcd [ 2.410085] usb usb8: SerialNumber: ... [ 2.410208] hub 8-0:1.0: USB hub found [ 2.410219] hub 8-0:1.0: 2 ports detected [ 2.410359] ahci 0000:00:11.0: version 3.0 [ 2.410545] ahci 0000:00:11.0: AHCI vers 0001.0200, 32 command slots, 6 Gbps, SATA mode [ 2.410549] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 2.410551] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part [ 2.411770] scsi host4: ahci [ 2.414645] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 2.414665] sd 0:0:0:0: [sda] Write Protect is off [ 2.414669] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.414696] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.414741] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.416372] scsi host5: ahci [ 2.416628] scsi host6: ahci [ 2.416829] scsi host7: ahci [ 2.416906] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 lpm-pol 3 [ 2.416910] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 lpm-pol 3 [ 2.416913] ata7: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19 lpm-pol 3 [ 2.416916] ata8: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19 lpm-pol 3 [ 2.417129] ahci 0000:02:00.0: AHCI vers 0001.0000, 32 command slots, 6 Gbps, SATA mode [ 2.417133] ahci 0000:02:00.0: 2/2 ports implemented (port mask 0x3) [ 2.417136] ahci 0000:02:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.417584] scsi host8: ahci [ 2.417766] scsi host9: ahci [ 2.417836] ata9: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915100 irq 40 lpm-pol 0 [ 2.417839] ata10: SATA max UDMA/133 abar m2048@0xfe915000 port 0xfe915180 irq 40 lpm-pol 0 [ 2.440404] sda: sda1 sda2 [ 2.440558] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.472175] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.472180] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.472183] usb usb4: Product: OHCI PCI host controller [ 2.472185] usb usb4: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.472187] usb usb4: SerialNumber: ... [ 2.472358] hub 4-0:1.0: USB hub found [ 2.472372] hub 4-0:1.0: 5 ports detected [ 2.472760] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.472771] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9 [ 2.472793] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 2.524376] usb 3-1: New USB device found, idVendor=0424, idProduct=2504, bcdDevice= 0.01 [ 2.524380] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.524676] hub 3-1:1.0: USB hub found [ 2.524774] hub 3-1:1.0: 2 ports detected [ 2.532075] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.532080] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.532082] usb usb9: Product: OHCI PCI host controller [ 2.532084] usb usb9: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.532085] usb usb9: SerialNumber: ... [ 2.532366] hub 9-0:1.0: USB hub found [ 2.532380] hub 9-0:1.0: 5 ports detected [ 2.532797] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.532804] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10 [ 2.532824] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 2.592128] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.592133] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.592135] usb usb10: Product: OHCI PCI host controller [ 2.592136] usb usb10: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.592138] usb usb10: SerialNumber: ... [ 2.592350] hub 10-0:1.0: USB hub found [ 2.592362] hub 10-0:1.0: 2 ports detected [ 2.592675] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 2.592682] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11 [ 2.592711] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 2.652085] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12 [ 2.652090] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 2.652093] usb usb11: Product: OHCI PCI host controller [ 2.652101] usb usb11: Manufacturer: Linux 6.12.12+bpo-amd64 ohci_hcd [ 2.652103] usb usb11: SerialNumber: ... [ 2.652322] hub 11-0:1.0: USB hub found [ 2.652334] hub 11-0:1.0: 4 ports detected [ 2.664211] firewire_core 0000:05:00.0: created device fw0: GUID 008f130034911100, S400 [ 2.727602] ata6: SATA link down (SStatus 0 SControl 300) [ 2.727763] ata8: SATA link down (SStatus 0 SControl 300) [ 2.728962] usb 2-1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.12 [ 2.728976] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.728982] usb 2-1: SerialNumber: ... [ 2.788018] usb 9-2: new low-speed USB device number 2 using ohci-pci [ 2.884012] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 330) [ 2.884015] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.884081] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 330) [ 2.884083] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.884241] ata7.00: ATA-10: KINGSTON SA400S37480G, SBFK61K1, max UDMA/133 [ 2.884292] ata7.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 2.884411] ata7.00: configured for UDMA/133 [ 2.885027] ata5.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 2.885294] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.885356] ata10.00: ATAPI: DRW-24D5MT, 2.00, max UDMA/133 [ 2.885960] ata9.00: ATAPI: ASUS BW-16D1HT, 3.10, max UDMA/133 [ 2.886510] ata5.00: configured for UDMA/133 [ 2.886599] ata10.00: configured for UDMA/133 [ 2.886760] scsi 4:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 2.886839] ata9.00: configured for UDMA/133 [ 2.887206] sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.887211] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ 2.887226] sd 4:0:0:0: [sdb] Write Protect is off [ 2.887229] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.887249] scsi 6:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 5 [ 2.887256] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.887303] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.887703] sd 6:0:0:0: [sdc] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.887720] sd 6:0:0:0: [sdc] Write Protect is off [ 2.887723] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.887747] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.887790] sd 6:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 2.891758] scsi 8:0:0:0: CD-ROM ASUS BW-16D1HT 3.10 PQ: 0 ANSI: 5 [ 2.912292] sdc: sdc1 sdc2 sdc3 sdc4 [ 2.912610] sd 6:0:0:0: [sdc] Attached SCSI disk [ 2.929669] sdb: sdb1 sdb2 [ 2.929928] sd 4:0:0:0: [sdb] Attached SCSI disk [ 2.934968] scsi 9:0:0:0: CD-ROM ASUS DRW-24D5MT 2.00 PQ: 0 ANSI: 5 [ 3.040064] sr 8:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.040070] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.081938] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 3.135071] sr 9:0:0:0: [sr1] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.152055] usb 4-2: new full-speed USB device number 2 using ohci-pci [ 3.168700] sr 9:0:0:0: Attached scsi CD-ROM sr1 [ 3.337104] usb 4-2: New USB device found, idVendor=09da, idProduct=3519, bcdDevice= 1.00 [ 3.337111] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.337114] usb 4-2: Product: A4Tech Gaming Mouse [ 3.337116] usb 4-2: Manufacturer: PixArt [ 3.340284] usb 3-1.1: new high-speed USB device number 4 using ehci-pci [ 3.356134] hid: raw HID events driver (C) Jiri Kosina [ 3.368284] usbcore: registered new interface driver usbhid [ 3.368288] usbhid: USB HID core driver [ 3.371234] input: PixArt A4Tech Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/0003:09DA:3519.0001/input/input2 [ 3.371376] hid-generic 0003:09DA:3519.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input0 [ 3.371784] input: PixArt A4Tech Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/0003:09DA:3519.0002/input/input4 [ 3.424177] hid-generic 0003:09DA:3519.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [PixArt A4Tech Gaming Mouse] on usb-0000:00:12.0-2/input1 [ 3.440778] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00 [ 3.440784] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 3.440787] usb 3-1.1: Product: 802.11n NIC [ 3.440789] usb 3-1.1: Manufacturer: Realtek [ 3.440790] usb 3-1.1: SerialNumber: ... [ 4.351222] usb 9-2: New USB device found, idVendor=0463, idProduct=ffff, bcdDevice= 0.01 [ 4.351236] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.351242] usb 9-2: Product: NOVA AVR [ 4.351247] usb 9-2: Manufacturer: MGE UPS SYSTEMS [ 6.886150] hid-generic 0003:0463:FFFF.0003: hiddev1,hidraw2: USB HID v1.00 Device [MGE UPS SYSTEMS NOVA AVR] on usb-0000:00:13.0-2/input0 [ 7.155987] usb 9-3: new full-speed USB device number 3 using ohci-pci [ 7.230819] [drm] amdgpu kernel modesetting enabled. [ 7.230968] amdgpu: Virtual CRAT table created for CPU [ 7.230987] amdgpu: Topology: Add CPU node [ 7.231308] [drm] initializing kernel modesetting (POLARIS10 0x1002:0x6FDF 0x1002:0x0B31 0xEF). [ 7.231334] [drm] register mmio base: 0xFEA00000 [ 7.231336] [drm] register mmio size: 262144 [ 7.231429] [drm] add ip block number 0 <vi_common> [ 7.231432] [drm] add ip block number 1 <gmc_v8_0> [ 7.231433] [drm] add ip block number 2 <tonga_ih> [ 7.231435] [drm] add ip block number 3 <gfx_v8_0> [ 7.231436] [drm] add ip block number 4 <sdma_v3_0> [ 7.231437] [drm] add ip block number 5 <powerplay> [ 7.231439] [drm] add ip block number 6 <dm> [ 7.231440] [drm] add ip block number 7 <uvd_v6_0> [ 7.231442] [drm] add ip block number 8 <vce_v3_0> [ 7.231690] amdgpu 0000:01:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 7.231694] amdgpu: ATOM BIOS: xxx-xxx-xxx [ 7.232002] [drm] UVD is enabled in VM mode [ 7.232004] [drm] UVD ENC is enabled in VM mode [ 7.232006] [drm] VCE enabled in VM mode [ 7.232094] amdgpu 0000:01:00.0: vgaarb: deactivate vga console [ 7.233170] Console: switching to colour dummy device 80x25 [ 7.233176] amdgpu 0000:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 7.233179] amdgpu 0000:01:00.0: amdgpu: PCIE atomic ops is not supported [ 7.233206] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 7.233515] amdgpu 0000:01:00.0: amdgpu: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used) [ 7.233520] amdgpu 0000:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 7.233526] [drm] Detected VRAM RAM=8192M, BAR=256M [ 7.233528] [drm] RAM width 256bits GDDR5 [ 7.233714] [drm] amdgpu: 8192M of VRAM memory ready [ 7.233717] [drm] amdgpu: 11997M of GTT memory ready. [ 7.233736] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 7.234122] [drm] PCIE GART of 256M enabled (table at 0x000000F400900000). [ 7.235260] [drm] Chained IB support enabled! [ 7.240056] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 7.242857] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 7.244709] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 7.556836] [drm] Display Core v3.2.301 initialized on DCE 11.2 [ 7.621503] [drm] UVD and UVD ENC initialized successfully. [ 7.631439] usb 9-3: New USB device found, idVendor=09da, idProduct=faa8, bcdDevice= 0.7b [ 7.631442] usb 9-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 7.631444] usb 9-3: Product: USB Device [ 7.631446] usb 9-3: Manufacturer: COMPANY [ 7.731518] [drm] VCE initialized successfully. [ 7.732484] kfd kfd: amdgpu: skipped device 1002:6fdf, PCI rejects atomics 730<0 [ 7.732498] amdgpu 0000:01:00.0: amdgpu: SE 4, SH per SE 1, CU per SH 9, active_cu_number 32 [ 7.735730] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.0/0003:09DA:FAA8.0004/input/input5 [ 7.736770] amdgpu 0000:01:00.0: amdgpu: Using BACO for runtime pm [ 7.737709] [drm] Initialized amdgpu 3.59.0 for 0000:01:00.0 on minor 0 [ 7.752065] fbcon: amdgpudrmfb (fb0) is primary device [ 7.833834] Console: switching to colour frame buffer device 160x64 [ 7.867106] amdgpu 0000:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 7.880220] hid-generic 0003:09DA:FAA8.0004: input,hidraw3: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:13.0-3/input0 [ 7.883613] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.1/0003:09DA:FAA8.0005/input/input6 [ 7.883725] hid-generic 0003:09DA:FAA8.0005: input,hidraw4: USB HID v1.11 Mouse [COMPANY USB Device ] on usb-0000:00:13.0-3/input1 [ 7.887834] input: COMPANY USB Device Keyboard as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.2/0003:09DA:FAA8.0006/input/input7 [ 7.940171] input: COMPANY USB Device as /devices/pci0000:00/0000:00:13.0/usb9/9-3/9-3:1.2/0003:09DA:FAA8.0006/input/input8 [ 7.940423] hid-generic 0003:09DA:FAA8.0006: input,hiddev2,hidraw5: USB HID v1.11 Keyboard [COMPANY USB Device ] on usb-0000:00:13.0-3/input2 [ 8.063950] raid6: sse2x4 gen() 12185 MB/s [ 8.131950] raid6: sse2x2 gen() 11537 MB/s [ 8.199947] raid6: sse2x1 gen() 7793 MB/s [ 8.199951] raid6: using algorithm sse2x4 gen() 12185 MB/s [ 8.267948] raid6: .... xor() 4500 MB/s, rmw enabled [ 8.267950] raid6: using ssse3x2 recovery algorithm [ 8.269792] xor: automatically using best checksumming function avx [ 8.271289] async_tx: api initialized (async) [ 8.610597] Btrfs loaded, zoned=yes, fsverity=yes [ 21.424454] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 21.424524] floppy: error 10 while reading block 0 [ 21.823825] EXT4-fs (sdc4): mounted filesystem HASH_568-82B8-100D-ADB6-3120FA883512 ro with ordered data mode. Quota mode: none. [ 21.928945] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 22.502444] loop: module loaded [ 22.519396] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 22.519455] device-mapper: uevent: version 1.0.3 [ 22.519605] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 22.544002] EXT4-fs (sdc4): re-mounted HASH_568-82B8-100D-ADB6-3120FA883512 r/w. Quota mode: none. [ 22.551542] lp: driver loaded but no devices found [ 22.559428] ppdev: user-space parallel port driver [ 22.935065] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 22.962102] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 22.963289] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 22.979359] sr 8:0:0:0: Attached scsi generic sg3 type 5 [ 23.002821] sr 9:0:0:0: Attached scsi generic sg4 type 5 [ 23.083891] random: crng init done [ 23.109251] acpi_cpufreq: overriding BIOS provided _PSD data [ 23.110037] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 23.110673] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 23.114679] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 23.115824] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 23.123600] mc: Linux media interface: v0.10 [ 23.138104] cryptd: max_cpu_qlen set to 1000 [ 23.143028] at24 0-0050: supply vcc not found, using dummy regulator [ 23.148341] at24 0-0050: 256 byte spd EEPROM, read-only [ 23.149657] at24 0-0051: supply vcc not found, using dummy regulator [ 23.157350] at24 0-0051: 256 byte spd EEPROM, read-only [ 23.161591] at24 0-0052: supply vcc not found, using dummy regulator [ 23.171109] AES CTR mode by8 optimization enabled [ 23.175042] at24 0-0052: 256 byte spd EEPROM, read-only [ 23.183030] at24 0-0053: supply vcc not found, using dummy regulator [ 23.191688] at24 0-0053: 256 byte spd EEPROM, read-only [ 23.240526] videodev: Linux video capture interface: v2.00 [ 23.338890] saa7134: saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 23.339066] saa7134: saa7133[0]: found at 0000:07:06.0, rev: 209, irq: 21, latency: 32, mmio: 0xfe400000 [ 23.339076] saa7134: saa7133[0]: subsystem: 1461:f11d, board: Avermedia PCI pure analog (M135A) [card=149,autodetected] saa7134: saa7133[0]: board init: gpio is 40000 [ 23.341380] usb 2-1: Found UVC 1.00 device <unnamed> (046d:0825) [ 23.341799] snd_hda_intel 0000:01:00.1: Force to non-snoop mode [ 23.375940] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 23.385966] usbcore: registered new interface driver uvcvideo [ 23.390036] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11 [ 23.390311] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12 [ 23.390412] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13 [ 23.390509] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14 [ 23.390630] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15 [ 23.390735] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16 [ 23.472587] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 23.472598] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 23.472602] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 23.472604] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 23.472606] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 23.472608] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 23.472610] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 23.472613] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 23.472615] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 23.472915] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 23.473220] Loaded X.509 cert 'XXX@XXX: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 23.473499] Loaded X.509 cert 'XXX@XXX: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 23.473776] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 23.474056] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 23.499899] Registered IR keymap rc-avermedia-m135a [ 23.556683] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17 [ 23.556881] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18 [ 23.557060] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19 [ 23.557245] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input20 [ 23.559160] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input21 [ 23.559302] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input22 [ 23.559448] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input23 [ 23.559588] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input24 [ 23.562518] IR NEC protocol handler initialized [ 23.583963] rc rc0: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0 [ 23.584025] rc rc0: lirc_dev: driver saa7134 registered at minor = 0, raw IR receiver, no transmitter [ 23.584076] input: Avermedia PCI pure analog (M135A) as /devices/pci0000:00/0000:00:14.4/0000:07:06.0/rc/rc0/input10 [ 23.637056] kvm_amd: TSC scaling supported [ 23.637063] kvm_amd: Nested Virtualization enabled [ 23.637065] kvm_amd: Nested Paging enabled [ 23.637067] kvm_amd: LBR virtualization supported [ 23.673083] MCE: In-kernel MCE decoding enabled. [ 23.735983] saa7134: i2c eeprom 00: 61 14 1d f1 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 23.735995] saa7134: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 23.736000] saa7134: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 56 ff ff ff ff [ 23.736003] saa7134: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.736006] saa7134: i2c eeprom 40: ff 22 00 c0 96 ff 03 30 15 00 ff ff ff ff ff ff [ 23.736009] saa7134: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.736012] saa7134: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.736015] saa7134: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.736018] saa7134: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.736021] saa7134: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.736024] saa7134: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.736033] saa7134: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.736034] saa7134: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.736038] saa7134: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.736039] saa7134: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.736040] saa7134: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 23.811988] tuner: 13-004b: Tuner -1 found with type(s) Radio TV. [ 23.891971] tda829x 13-004b: setting tuner address to 60 [ 23.972007] tda829x 13-004b: type set to tda8290+75a [ 23.995729] usb 3-1.1: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 23.995745] usb 3-1.1: RTL8188EU MAC: BADABB35081E531F0CC7D51256DDD3BD [ 23.995751] usb 3-1.1: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin [ 23.996758] usb 3-1.1: Firmware revision 28.0 (signature 0x88e1) [ 24.563350] usbcore: registered new interface driver rtl8xxxu [ 24.572347] rtl8xxxu 3-1.1:1.0 wlxd037459855f3: renamed from wlan0 [ 24.767981] usb 2-1: set resolution quirk: cval->res = 384 [ 24.769127] usbcore: registered new interface driver snd-usb-audio [ 27.668761] saa7134: saa7133[0]: registered device video2 [v4l2] saa7134: saa7133[0]: registered device vbi0 [ 27.668999] saa7134: saa7133[0]: registered device radio0 [ 27.704585] saa7134_alsa: saa7134 ALSA driver for DMA sound loaded [ 27.704636] saa7134_alsa: saa7133[0]/alsa: saa7133[0] at 0xfe400000 irq 21 registered as card -1 [ 31.979061] Process accounting resumed [ 32.142050] warning: `atop' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 32.269301] NET: Registered PF_QIPCRTR protocol family [ 34.117670] wlxd037459855f3: regulatory prevented using AP config, downgraded [ 34.122906] wlxd037459855f3: authenticate with 6C6DEF9152362CC1FFD2B5D63C0AC627 (local address=BADABB35081E531F0CC7D51256DDD3BD) [ 34.122915] wlxd037459855f3: send auth to 6C6DEF9152362CC1FFD2B5D63C0AC627 (try 1/3) [ 34.125022] wlxd037459855f3: authenticated [ 34.131936] wlxd037459855f3: associate with 6C6DEF9152362CC1FFD2B5D63C0AC627 (try 1/3) [ 34.136870] wlxd037459855f3: RX AssocResp from 6C6DEF9152362CC1FFD2B5D63C0AC627 (capab=0x411 status=0 aid=7) [ 34.138643] usb 3-1.1: rtl8xxxu_bss_info_changed: HT supported [ 34.140889] wlxd037459855f3: associated [ 35.982434] tg3 0000:06:00.0 enp6s0: Link is up at 1000 Mbps, full duplex [ 35.982440] tg3 0000:06:00.0 enp6s0: Flow control is on for TX and on for RX [ 35.982443] tg3 0000:06:00.0 enp6s0: EEE is disabled [ 36.471972] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 45.392222] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 139.822462] wlxd037459855f3: deauthenticating from 6C6DEF9152362CC1FFD2B5D63C0AC627 by local choice (Reason: 3=DEAUTH_LEAVING)