[ 6.725331] Linux version 6.14.2-desktop-3omv2590 (XXX@XXX) (OpenMandriva 19.1.7-1 clang version 19.1.7 (/builddir/build/BUILD/llvm-19.1.7-build/llvm-project-llvmorg-19.1.7/clang f6577d7ceed75def4c4c7db30fa2d30a053fc852), OpenMandriva 19.1.7-1 LLD 19.1.7 (/builddir/build/BUILD/llvm-19.1.7-build/llvm-project-llvmorg-19.1.7/llvm f6577d7ceed75def4c4c7db30fa2d30a053fc852)) #1 SMP PREEMPT_DYNAMIC Fri Apr 18 21:01:44 UTC 2025 [ 6.725359] KERNEL supported cpus: [ 6.725364] Intel GenuineIntel [ 6.725368] AMD AuthenticAMD [ 6.725372] Hygon HygonGenuine [ 6.725377] Centaur CentaurHauls [ 6.725382] zhaoxin Shanghai [ 6.725386] x86/tme: not enabled by BIOS [ 6.725391] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks [ 6.725397] BIOS-provided physical RAM map: [ 6.725401] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 6.725405] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved [ 6.725409] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable [ 6.725415] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 6.725419] BIOS-e820: [mem 0x0000000000100000-0x000000002c6cefff] usable [ 6.725423] BIOS-e820: [mem 0x000000002c6cf000-0x00000000303cefff] reserved [ 6.725427] BIOS-e820: [mem 0x00000000303cf000-0x0000000030804fff] ACPI data [ 6.725431] BIOS-e820: [mem 0x0000000030805000-0x0000000030e1efff] ACPI NVS [ 6.725435] BIOS-e820: [mem 0x0000000030e1f000-0x0000000033efefff] reserved [ 6.725439] BIOS-e820: [mem 0x0000000033eff000-0x0000000033efffff] usable [ 6.725445] BIOS-e820: [mem 0x0000000033f00000-0x0000000039ffffff] reserved [ 6.725449] BIOS-e820: [mem 0x000000003a400000-0x000000003a7fffff] reserved [ 6.725453] BIOS-e820: [mem 0x000000003b000000-0x00000000407fffff] reserved [ 6.725457] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 6.725461] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 6.725465] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 6.725469] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 6.725473] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 6.725477] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 6.725481] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 6.725485] BIOS-e820: [mem 0x0000000100000000-0x00000010bf7fffff] usable [ 6.725489] NX (Execute Disable) protection: active [ 6.725493] APIC: Static calls initialized [ 6.725497] e820: update [mem 0x1862b018-0x1864fa57] usable ==> usable [ 6.725502] e820: update [mem 0x18618018-0x1862a057] usable ==> usable [ 6.725506] extended physical RAM map: [ 6.725511] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable [ 6.725516] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved [ 6.725520] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable [ 6.725525] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 6.725531] reserve setup_data: [mem 0x0000000000100000-0x0000000018618017] usable [ 6.725535] reserve setup_data: [mem 0x0000000018618018-0x000000001862a057] usable [ 6.725539] reserve setup_data: [mem 0x000000001862a058-0x000000001862b017] usable [ 6.725543] reserve setup_data: [mem 0x000000001862b018-0x000000001864fa57] usable [ 6.725547] reserve setup_data: [mem 0x000000001864fa58-0x000000002c6cefff] usable [ 6.725551] reserve setup_data: [mem 0x000000002c6cf000-0x00000000303cefff] reserved [ 6.725555] reserve setup_data: [mem 0x00000000303cf000-0x0000000030804fff] ACPI data [ 6.725560] reserve setup_data: [mem 0x0000000030805000-0x0000000030e1efff] ACPI NVS [ 6.725564] reserve setup_data: [mem 0x0000000030e1f000-0x0000000033efefff] reserved [ 6.725568] reserve setup_data: [mem 0x0000000033eff000-0x0000000033efffff] usable [ 6.725572] reserve setup_data: [mem 0x0000000033f00000-0x0000000039ffffff] reserved [ 6.725576] reserve setup_data: [mem 0x000000003a400000-0x000000003a7fffff] reserved [ 6.725580] reserve setup_data: [mem 0x000000003b000000-0x00000000407fffff] reserved [ 6.725585] reserve setup_data: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 6.725590] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 6.725594] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 6.725598] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 6.725602] reserve setup_data: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 6.725606] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 6.725610] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 6.725614] reserve setup_data: [mem 0x0000000100000000-0x00000010bf7fffff] usable [ 6.725618] efi: EFI v2.8 by American Megatrends [ 6.725623] efi: ACPI=0x30804000 ACPI 2.0=0x30804014 TPMFinalLog=0x30ceb000 SMBIOS=0x33919000 SMBIOS 3.0=0x33918000 MEMATTR=0x27c0e018 ESRT=0x2987c518 INITRD=0x1af5bd18 RNG=0x30745c18 TPMEventLog=0x305e2018 [ 6.725627] random: crng init done [ 6.725631] efi: Remove mem94: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map [ 6.725635] e820: remove [mem 0xc0000000-0xcfffffff] reserved [ 6.725643] efi: Not removing mem95: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 6.725646] efi: Not removing mem96: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 6.725651] efi: Not removing mem97: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map [ 6.725655] efi: Not removing mem99: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 6.725659] efi: Remove mem100: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 6.725663] e820: remove [mem 0xff000000-0xffffffff] reserved [ 6.725667] SMBIOS 3.5.0 present. [ 6.725670] DMI: ASUS System Product Name/ProArt Z790-CREATOR WIFI, BIOS 3002 05/27/2025 [ 6.725674] DMI: Memory slots populated: 2/4 [ 6.725678] tsc: Detected 3000.000 MHz processor [ 6.725682] tsc: Detected 2995.200 MHz TSC [ 6.725686] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 6.725691] e820: remove [mem 0x000a0000-0x000fffff] usable [ 6.725695] last_pfn = 0x10bf800 max_arch_pfn = 0x400000000 [ 6.725700] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs [ 6.725705] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 6.725709] e820: update [mem 0x3c000000-0xffffffff] usable ==> reserved [ 6.725714] last_pfn = 0x33f00 max_arch_pfn = 0x400000000 [ 6.725718] esrt: Reserving ESRT space from 0x000000002987c518 to 0x000000002987c5f0. [ 6.725723] e820: update [mem 0x2987c000-0x2987cfff] usable ==> reserved [ 6.725727] Using GB pages for direct mapping [ 6.725731] Secure boot disabled [ 6.725735] RAMDISK: [mem 0x03f93000-0x0d7cffff] ACPI: Early table checksum verification disabled [ 6.725745] ACPI: RSDP 0x0000000030804014 000024 (v02 ALASKA) [ 6.725749] ACPI: XSDT 0x0000000030803728 000114 (v01 ALASKA A M I 01072009 AMI 01000013) [ 6.725754] ACPI: FACP 0x0000000030802000 000114 (v06 ALASKA A M I 01072009 AMI 01000013) [ 6.725758] ACPI: DSDT 0x0000000030761000 0A00E9 (v02 ALASKA A M I 01072009 INTL 20200717) [ 6.725762] ACPI: FACS 0x0000000030E1E000 000040 [ 6.725767] ACPI: FIDT 0x0000000030760000 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 6.725771] ACPI: SSDT 0x000000003075C000 0027BF (v02 INTEL DTbtSsdt 00001000 INTL 20200717) [ 6.725775] ACPI: SSDT 0x000000003075B000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717) [ 6.725779] ACPI: SSDT 0x0000000030755000 005D34 (v02 CpuRef CpuSsdt 00003000 INTL 20200717) [ 6.725785] ACPI: SSDT 0x0000000030752000 002D13 (v02 SaSsdt SaSsdt 00003000 INTL 20200717) [ 6.725789] ACPI: SSDT 0x000000003074E000 00334F (v02 INTEL IgfxSsdt 00003000 INTL 20200717) [ 6.725794] ACPI: HPET 0x000000003074D000 000038 (v01 ALASKA A M I 01072009 AMI 01000013) [ 6.725798] ACPI: APIC 0x000000003074C000 0001DC (v05 ALASKA A M I 01072009 AMI 01000013) [ 6.725802] ACPI: MCFG 0x000000003074B000 00003C (v01 ALASKA A M I 01072009 AMI 01000013) [ 6.725806] ACPI: SSDT 0x0000000030748000 002313 (v02 ALASKA RplS_Tbt 00001000 INTL 20200717) [ 6.725811] ACPI: SSDT 0x0000000030746000 001F1A (v02 ALASKA Ther_Rvp 00001000 INTL 20200717) [ 6.725815] ACPI: NHLT 0x0000000030744000 00002D (v00 ALASKA A M I 01072009 AMI 01000013) [ 6.725820] ACPI: LPIT 0x0000000030743000 0000CC (v01 ALASKA A M I 01072009 AMI 01000013) [ 6.725824] ACPI: SSDT 0x0000000030740000 001263 (v02 ALASKA TbtTypeC 00000000 INTL 20200717) [ 6.725829] ACPI: SSDT 0x000000003073D000 002A83 (v02 ALASKA PtidDevc 00001000 INTL 20200717) [ 6.725833] ACPI: DBGP 0x000000003073C000 000034 (v01 ALASKA A M I 01072009 AMI 01000013) [ 6.725837] ACPI: DBG2 0x000000003073B000 000054 (v00 ALASKA A M I 01072009 AMI 01000013) [ 6.725841] ACPI: SSDT 0x000000003073A000 000C1F (v02 ALASKA UsbCTabl 00001000 INTL 20200717) [ 6.725846] ACPI: DMAR 0x0000000030739000 000050 (v01 INTEL EDK2 00000002 01000013) [ 6.725850] ACPI: FPDT 0x0000000030738000 000044 (v01 ALASKA A M I 01072009 AMI 01000013) [ 6.725854] ACPI: SSDT 0x0000000030736000 001CD6 (v02 INTEL xh_rps14 00000000 INTL 20200717) [ 6.725860] ACPI: SSDT 0x0000000030732000 0039DA (v02 SocGpe SocGpe 00003000 INTL 20200717) [ 6.725866] ACPI: SSDT 0x000000003072E000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717) [ 6.725871] ACPI: UEFI 0x0000000030C3E000 00063A (v01 INTEL RstVmdE 00000000 INTL 00000000) [ 6.725876] ACPI: UEFI 0x0000000030C3D000 00005C (v01 INTEL RstVmdV 00000000 INTL 00000000) [ 6.725880] ACPI: WPBT 0x00000000305EB000 000040 (v01 ALASKA A M I 00000001 ASUS 00000001) [ 6.725884] ACPI: TPM2 0x00000000305EA000 00004C (v04 ALASKA A M I 00000001 AMI 00000000) [ 6.725888] ACPI: PHAT 0x00000000305E9000 000631 (v01 ALASKA A M I 00000005 MSFT 0100000D) [ 6.725892] ACPI: WSMT 0x0000000030742000 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 6.725897] ACPI: Reserving FACP table memory at [mem 0x30802000-0x30802113] ACPI: Reserving DSDT table memory at [mem 0x30761000-0x308010e8] ACPI: Reserving FACS table memory at [mem 0x30e1e000-0x30e1e03f] ACPI: Reserving FIDT table memory at [mem 0x30760000-0x3076009b] ACPI: Reserving SSDT table memory at [mem 0x3075c000-0x3075e7be] ACPI: Reserving SSDT table memory at [mem 0x3075b000-0x3075b38b] ACPI: Reserving SSDT table memory at [mem 0x30755000-0x3075ad33] ACPI: Reserving SSDT table memory at [mem 0x30752000-0x30754d12] ACPI: Reserving SSDT table memory at [mem 0x3074e000-0x3075134e] ACPI: Reserving HPET table memory at [mem 0x3074d000-0x3074d037] ACPI: Reserving APIC table memory at [mem 0x3074c000-0x3074c1db] ACPI: Reserving MCFG table memory at [mem 0x3074b000-0x3074b03b] ACPI: Reserving SSDT table memory at [mem 0x30748000-0x3074a312] ACPI: Reserving SSDT table memory at [mem 0x30746000-0x30747f19] ACPI: Reserving NHLT table memory at [mem 0x30744000-0x3074402c] ACPI: Reserving LPIT table memory at [mem 0x30743000-0x307430cb] ACPI: Reserving SSDT table memory at [mem 0x30740000-0x30741262] ACPI: Reserving SSDT table memory at [mem 0x3073d000-0x3073fa82] ACPI: Reserving DBGP table memory at [mem 0x3073c000-0x3073c033] ACPI: Reserving DBG2 table memory at [mem 0x3073b000-0x3073b053] ACPI: Reserving SSDT table memory at [mem 0x3073a000-0x3073ac1e] ACPI: Reserving DMAR table memory at [mem 0x30739000-0x3073904f] ACPI: Reserving FPDT table memory at [mem 0x30738000-0x30738043] ACPI: Reserving SSDT table memory at [mem 0x30736000-0x30737cd5] ACPI: Reserving SSDT table memory at [mem 0x30732000-0x307359d9] ACPI: Reserving SSDT table memory at [mem 0x3072e000-0x307319d9] ACPI: Reserving UEFI table memory at [mem 0x30c3e000-0x30c3e639] ACPI: Reserving UEFI table memory at [mem 0x30c3d000-0x30c3d05b] ACPI: Reserving WPBT table memory at [mem 0x305eb000-0x305eb03f] ACPI: Reserving TPM2 table memory at [mem 0x305ea000-0x305ea04b] ACPI: Reserving PHAT table memory at [mem 0x305e9000-0x305e9630] ACPI: Reserving WSMT table memory at [mem 0x30742000-0x30742027] No NUMA configuration found [ 6.726036] Faking a node at [mem 0x0000000000000000-0x00000010bf7fffff] NODE_DATA(0) allocated [mem 0x10bf7dda40-0x10bf7fffff] Zone ranges: [ 6.726050] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x00000010bf7fffff] Movable zone start for each node [ 6.726066] Early memory node ranges [ 6.726070] node 0: [mem 0x0000000000001000-0x000000000009dfff] node 0: [mem 0x000000000009f000-0x000000000009ffff] node 0: [mem 0x0000000000100000-0x000000002c6cefff] node 0: [mem 0x0000000033eff000-0x0000000033efffff] node 0: [mem 0x0000000100000000-0x00000010bf7fffff] Initmem setup node 0 [mem 0x0000000000001000-0x00000010bf7fffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 6.726100] On node 0, zone DMA: 1 pages in unavailable ranges [ 6.726104] On node 0, zone DMA: 96 pages in unavailable ranges [ 6.726109] On node 0, zone DMA32: 30768 pages in unavailable ranges [ 6.726113] On node 0, zone Normal: 16640 pages in unavailable ranges [ 6.726118] On node 0, zone Normal: 2048 pages in unavailable ranges [ 6.726122] ACPI: PM-Timer IO Port: 0x1808 [ 6.726128] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 6.726132] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 6.726136] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 6.726140] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 6.726144] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 6.726148] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 6.726152] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 6.726156] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 6.726159] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 6.726164] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 6.726168] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 6.726171] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 6.726177] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 6.726181] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 6.726185] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 6.726188] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 6.726192] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 6.726196] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 6.726200] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 6.726204] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 6.726208] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 6.726212] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 6.726216] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 6.726220] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 6.726224] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 6.726229] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 6.726233] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 6.726238] ACPI: Using ACPI (MADT) for SMP configuration information [ 6.726242] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 6.726246] TSC deadline timer available [ 6.726250] CPU topo: Max. logical packages: 1 [ 6.726254] CPU topo: Max. logical dies: 1 [ 6.726258] CPU topo: Max. dies per package: 1 [ 6.726262] CPU topo: Max. threads per core: 2 [ 6.726268] CPU topo: Num. cores per package: 24 [ 6.726272] CPU topo: Num. threads per package: 32 [ 6.726276] CPU topo: Allowing 32 present CPUs plus 0 hotplug CPUs [ 6.726280] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x18618000-0x18618fff] PM: hibernation: Registered nosave memory: [mem 0x1862a000-0x1862afff] PM: hibernation: Registered nosave memory: [mem 0x1862b000-0x1862bfff] PM: hibernation: Registered nosave memory: [mem 0x1864f000-0x1864ffff] PM: hibernation: Registered nosave memory: [mem 0x2987c000-0x2987cfff] PM: hibernation: Registered nosave memory: [mem 0x2c6cf000-0x303cefff] PM: hibernation: Registered nosave memory: [mem 0x303cf000-0x30804fff] PM: hibernation: Registered nosave memory: [mem 0x30805000-0x30e1efff] PM: hibernation: Registered nosave memory: [mem 0x30e1f000-0x33efefff] PM: hibernation: Registered nosave memory: [mem 0x33f00000-0x39ffffff] PM: hibernation: Registered nosave memory: [mem 0x3a000000-0x3a3fffff] PM: hibernation: Registered nosave memory: [mem 0x3a400000-0x3a7fffff] PM: hibernation: Registered nosave memory: [mem 0x3a800000-0x3affffff] PM: hibernation: Registered nosave memory: [mem 0x3b000000-0x407fffff] PM: hibernation: Registered nosave memory: [mem 0x40800000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [mem 0x40800000-0xfdffffff] available for PCI devices [ 6.726399] Booting paravirtualized kernel on bare hardware [ 6.726404] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 6.726409] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 [ 6.726414] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 [ 6.726418] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 [ 6.726422] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 6.726426] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 6.726436] Unknown kernel command line parameters "splash BOOT_IMAGE=/@boot/vmlinuz-6.14.2-desktop-3omv2590 audit=0", will be passed to user space. [ 6.726441] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 6.726446] printk: log_buf_len total cpu_extra contributions: 126976 bytes [ 6.726450] printk: log_buf_len min size: 131072 bytes [ 6.726454] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes [ 6.726458] printk: early log buf free: 111352(84%) [ 6.726462] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 6.726467] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 6.726471] Fallback order for Node 0: 0 [ 6.726475] Built 1 zonelists, mobility grouping on. Total pages: 16694894 [ 6.726479] Policy zone: Normal [ 6.726485] mem auto-init: stack:off, heap alloc:off, heap free:off [ 6.726489] software IO TLB: area num 32. [ 6.726496] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 6.726500] Dynamic Preempt: lazy [ 6.726504] rcu: Preemptible hierarchical RCU implementation. [ 6.726508] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32. [ 6.726512] Trampoline variant of Tasks RCU enabled. [ 6.726516] Tracing variant of Tasks RCU enabled. [ 6.726520] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 6.726524] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 6.726529] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=32. [ 6.726533] RCU Tasks Trace: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=32. [ 6.726536] NR_IRQS: 524544, nr_irqs: 2312, preallocated irqs: 16 [ 6.726540] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 6.726544] Console: colour dummy device 80x30 [ 6.726548] printk: legacy console [tty0] enabled [ 6.726552] ACPI: Core revision 20240827 [ 6.726556] hpet: HPET dysfunctional in PC10. Force disabled. [ 6.726559] APIC: Switch to symmetric I/O mode setup [ 6.726564] DMAR: Host address width 39 [ 6.726568] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 6.726572] DMAR: dmar0: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da [ 6.726576] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 0 [ 6.726580] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 6.726583] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 6.726587] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 6.726591] x2apic enabled [ 6.726595] APIC: Switched APIC routing to: cluster x2apic [ 6.726601] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b2c8ec87c7, max_idle_ns: 440795278598 ns [ 6.726605] Calibrating delay loop (skipped), value calculated using timer frequency.. 5990.40 BogoMIPS (lpj=2995200) [ 6.726609] CPU0: Thermal monitoring enabled (TM1) [ 6.726613] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 6.726616] CET detected: Indirect Branch Tracking enabled [ 6.726620] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 6.726624] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 6.726628] process: using mwait in idle threads [ 6.726631] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 6.726636] Spectre V2 : WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks! [ 6.726641] Spectre V2 : Mitigation: Enhanced / Automatic IBRS [ 6.726644] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 6.726648] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 6.726652] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 6.726656] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 6.726660] Register File Data Sampling: Mitigation: Clear Register File [ 6.726663] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 6.726668] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 6.726672] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 6.726676] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 6.726679] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' [ 6.726683] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 6.726687] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 [ 6.726691] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 [ 6.726694] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format. [ 6.726698] Freeing SMP alternatives memory: 40K [ 6.726702] pid_max: default: 32768 minimum: 301 [ 6.726706] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 6.726710] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 6.726714] smpboot: CPU0: 13th Gen Intel(R) Core(TM) i9-13900K (family: 0x6, model: 0xb7, stepping: 0x1) [ 6.726718] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. [ 6.726722] core: cpu_core PMU driver: [ 6.726725] ... version: 5 [ 6.726729] ... bit width: 48 [ 6.726732] ... generic registers: 8 [ 6.726735] ... value mask: 0000ffffffffffff [ 6.726739] ... max period: 00007fffffffffff [ 6.726742] ... fixed-purpose events: 4 [ 6.726746] ... event mask: 0001000f000000ff [ 6.726749] signal: max sigframe size: 3632 [ 6.726753] Estimated ratio of average max frequency by base frequency (times 1024): 1877 [ 6.726756] rcu: Hierarchical SRCU implementation. [ 6.726760] rcu: Max phase no-delay instances is 400. [ 6.726764] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level [ 6.726768] smp: Bringing up secondary CPUs ... [ 6.726771] smpboot: x86: Booting SMP configuration: [ 6.726775] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #14 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31 [ 6.726779] core: cpu_atom PMU driver: [ 6.726782] ... version: 5 [ 6.726786] ... bit width: 48 [ 6.726789] ... generic registers: 6 [ 6.726793] ... value mask: 0000ffffffffffff [ 6.726796] ... max period: 00007fffffffffff [ 6.726800] ... fixed-purpose events: 3 [ 6.726803] ... event mask: 000000070000003f [ 6.726807] #1 #3 #5 #7 #9 #11 #13 #15 [ 6.726811] smp: Brought up 1 node, 32 CPUs [ 6.726816] smpboot: Total of 32 processors activated (191692.80 BogoMIPS) [ 6.726820] Memory: 65340268K/66779576K available (13111K kernel code, 1439K rwdata, 9300K rodata, 2952K init, 4156K bss, 1413448K reserved, 0K cma-reserved) [ 6.726824] devtmpfs: initialized [ 6.726834] x86/mm: Memory block size: 2048MB [ 6.726837] ACPI: PM: Registering ACPI NVS region [mem 0x30805000-0x30e1efff] (6397952 bytes) [ 6.726842] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 6.726846] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 6.726849] pinctrl core: initialized pinctrl subsystem [ 6.726853] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 6.726856] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 6.726860] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 6.726864] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 6.726867] thermal_sys: Registered thermal governor 'fair_share' [ 6.726871] thermal_sys: Registered thermal governor 'bang_bang' [ 6.726875] thermal_sys: Registered thermal governor 'step_wise' [ 6.726879] thermal_sys: Registered thermal governor 'user_space' [ 6.726882] thermal_sys: Registered thermal governor 'power_allocator' [ 6.726887] cpuidle: using governor ladder [ 6.726891] cpuidle: using governor menu [ 6.726895] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 6.726899] PCI: ECAM [mem 0xc0000000-0xce0fffff] (base 0xc0000000) for domain 0000 [bus 00-e0] PCI: Using configuration type 1 for base access [ 6.726907] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 6.726910] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 6.726914] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 6.726918] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 6.726922] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 6.726925] fbcon: Taking over console [ 6.726929] ACPI: Added _OSI(Module Device) [ 6.726932] ACPI: Added _OSI(Processor Device) [ 6.726936] ACPI: Added _OSI(3.0 _SCP Extensions) [ 6.726939] ACPI: Added _OSI(Processor Aggregator Device) [ 6.726943] ACPI: 14 ACPI AML tables successfully acquired and loaded [ 6.726948] ACPI: Dynamic OEM Table Load: [ 6.726952] ACPI: SSDT 0xFFFF8A3AC1CA7800 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717) [ 6.726955] ACPI: Dynamic OEM Table Load: [ 6.726959] ACPI: SSDT 0xFFFF8A3AC1F05800 000605 (v02 PmRef Cpu0Ist 00003000 INTL 20200717) [ 6.726963] ACPI: Dynamic OEM Table Load: [ 6.726967] ACPI: SSDT 0xFFFF8A3AC01CDA00 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717) [ 6.726971] ACPI: Dynamic OEM Table Load: [ 6.726974] ACPI: SSDT 0xFFFF8A3AC1F01000 0004B5 (v02 PmRef Cpu0Hwp 00003000 INTL 20200717) [ 6.726978] ACPI: Dynamic OEM Table Load: [ 6.726982] ACPI: SSDT 0xFFFF8A3AC1F0C000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717) [ 6.726987] ACPI: Dynamic OEM Table Load: [ 6.726991] ACPI: SSDT 0xFFFF8A3AC1F08000 001038 (v02 PmRef ApHwp 00003000 INTL 20200717) [ 6.726994] ACPI: Dynamic OEM Table Load: [ 6.726998] ACPI: SSDT 0xFFFF8A3AC1F0E000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717) [ 6.727005] ACPI: Dynamic OEM Table Load: [ 6.727009] ACPI: SSDT 0xFFFF8A3AC01B1000 000FBB (v02 PmRef ApCst 00003000 INTL 20200717) [ 6.727013] ACPI: EC: EC started [ 6.727016] ACPI: EC: interrupt blocked [ 6.727020] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 6.727025] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 6.727029] ACPI: Interpreter enabled [ 6.727033] ACPI: PM: (supports S0 S3 S4 S5) [ 6.727037] ACPI: Using IOAPIC for interrupt routing [ 6.727040] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 6.727044] PCI: Ignoring E820 reservations for host bridge windows [ 6.727048] ACPI: Enabled 7 GPEs in block 00 to 7F [ 6.727052] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource [ 6.727056] ACPI: \_SB_.PC00.RP03.PXSX.DRST: New power resource [ 6.727061] ACPI: \_SB_.PC00.RP05.PXP_: New power resource [ 6.727065] ACPI: \_SB_.PC00.XHCI.RHUB.HS14.PRBT: New power resource [ 6.727069] ACPI: \_SB_.PC00.CNVW.WRST: New power resource [ 6.727072] ACPI: \_TZ_.FN00: New power resource [ 6.727076] ACPI: \_TZ_.FN01: New power resource [ 6.727080] ACPI: \_TZ_.FN02: New power resource [ 6.727084] ACPI: \_TZ_.FN03: New power resource [ 6.727088] ACPI: \_TZ_.FN04: New power resource [ 6.727091] ACPI: \PIN_: New power resource [ 6.727096] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-e0]) [ 6.727219] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] PCI host bridge to bus 0000:00 [ 6.727364] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window] pci_bus 0000:00: root bus resource [mem 0x40800000-0xbfffffff window] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:00: root bus resource [bus 00-e0] pci 0000:00:00.0: [8086:a700] type 00 class 0x060000 conventional PCI endpoint [ 6.727831] pci 0000:00:01.0: [8086:a70d] type 01 class 0x060400 PCIe Root Port [ 6.727895] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] pci 0000:00:01.0: bridge window [mem 0x76000000-0x770fffff] pci 0000:00:01.0: bridge window [mem 0x4050000000-0x4061ffffff 64bit pref] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 6.728222] pci 0000:00:01.0: PTM enabled (root), 4ns granularity [ 6.728289] pci 0000:00:06.0: [8086:09ab] type 00 class 0x088000 conventional PCI endpoint [ 6.728355] pci 0000:00:0a.0: [8086:a77d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint [ 6.728418] pci 0000:00:0a.0: BAR 0 [mem 0x4066210000-0x4066217fff 64bit] pci 0000:00:0a.0: enabling Extended Tags [ 6.728544] pci 0000:00:0e.0: [8086:a77f] type 00 class 0x010400 PCIe Root Complex Integrated Endpoint [ 6.728603] pci 0000:00:0e.0: BAR 0 [mem 0x4064000000-0x4065ffffff 64bit] pci 0000:00:0e.0: BAR 2 [mem 0x74000000-0x75ffffff] pci 0000:00:0e.0: BAR 4 [mem 0x4066100000-0x40661fffff 64bit] pci 0000:00:14.0: [8086:7a60] type 00 class 0x0c0330 conventional PCI endpoint [ 6.728832] pci 0000:00:14.0: BAR 0 [mem 0x4066200000-0x406620ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 6.728945] pci 0000:00:14.2: [8086:7a27] type 00 class 0x050000 conventional PCI endpoint [ 6.729004] pci 0000:00:14.2: BAR 0 [mem 0x4066224000-0x4066227fff 64bit] pci 0000:00:14.2: BAR 2 [mem 0x406622d000-0x406622dfff 64bit] pci 0000:00:15.0: [8086:7a4c] type 00 class 0x0c8000 conventional PCI endpoint [ 6.729178] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] pci 0000:00:15.1: [8086:7a4d] type 00 class 0x0c8000 conventional PCI endpoint [ 6.729293] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] pci 0000:00:15.2: [8086:7a4e] type 00 class 0x0c8000 conventional PCI endpoint [ 6.729406] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] pci 0000:00:16.0: [8086:7a68] type 00 class 0x078000 conventional PCI endpoint [ 6.729511] pci 0000:00:16.0: BAR 0 [mem 0x4066229000-0x4066229fff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 6.729618] pci 0000:00:17.0: [8086:09ab] type 00 class 0x088000 conventional PCI endpoint [ 6.729672] pci 0000:00:1a.0: [8086:7a48] type 01 class 0x060400 PCIe Root Port [ 6.729724] pci 0000:00:1a.0: PCI bridge to [bus 02] pci 0000:00:1a.0: bridge window [io 0x4000-0x4fff] pci 0000:00:1a.0: bridge window [mem 0x78400000-0x78dfffff] pci 0000:00:1a.0: bridge window [mem 0x4062b00000-0x40634fffff 64bit pref] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 6.730040] pci 0000:00:1b.0: [8086:7a40] type 01 class 0x060400 PCIe Root Port [ 6.730092] pci 0000:00:1b.0: PCI bridge to [bus 03] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 6.730196] pci 0000:00:1c.0: [8086:7a38] type 01 class 0x060400 PCIe Root Port [ 6.730245] pci 0000:00:1c.0: PCI bridge to [bus 04] pci 0000:00:1c.0: bridge window [mem 0x77400000-0x778fffff] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 6.730387] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity [ 6.730439] pci 0000:00:1c.2: [8086:7a3a] type 01 class 0x060400 PCIe Root Port [ 6.730486] pci 0000:00:1c.2: PCI bridge to [bus 05] pci 0000:00:1c.2: bridge window [mem 0x79000000-0x790fffff] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 6.730629] pci 0000:00:1c.2: PTM enabled (root), 4ns granularity [ 6.730681] pci 0000:00:1c.3: [8086:7a3b] type 01 class 0x060400 PCIe Root Port [ 6.730727] pci 0000:00:1c.3: PCI bridge to [bus 06] pci 0000:00:1c.3: bridge window [mem 0x78e00000-0x78ffffff] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 6.730861] pci 0000:00:1c.3: PTM enabled (root), 4ns granularity [ 6.730908] pci 0000:00:1c.4: [8086:7a3c] type 01 class 0x060400 PCIe Root Port [ 6.730953] pci 0000:00:1c.4: PCI bridge to [bus 07-70] pci 0000:00:1c.4: bridge window [mem 0x44000000-0x720fffff] pci 0000:00:1c.4: bridge window [mem 0x4000000000-0x404a0fffff 64bit pref] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 6.731135] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity [ 6.731184] pci 0000:00:1d.0: [8086:7a30] type 01 class 0x060400 PCIe Root Port [ 6.731228] pci 0000:00:1d.0: PCI bridge to [bus 71] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1d.0: bridge window [mem 0x77a00000-0x783fffff] pci 0000:00:1d.0: bridge window [mem 0x4062100000-0x4062afffff 64bit pref] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 6.731453] pci 0000:00:1f.0: [8086:7a04] type 00 class 0x060100 conventional PCI endpoint [ 6.731499] pci 0000:00:1f.3: [8086:7a50] type 00 class 0x040300 conventional PCI endpoint [ 6.731539] pci 0000:00:1f.3: BAR 0 [mem 0x4066220000-0x4066223fff 64bit] pci 0000:00:1f.3: BAR 4 [mem 0x4066000000-0x40660fffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 6.731662] pci 0000:00:1f.4: [8086:7a23] type 00 class 0x0c0500 conventional PCI endpoint [ 6.731703] pci 0000:00:1f.4: BAR 0 [mem 0x4066228000-0x40662280ff 64bit] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] pci 0000:00:1f.5: [8086:7a24] type 00 class 0x0c8000 conventional PCI endpoint [ 6.731826] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] pci 0000:01:00.0: [10de:2684] type 00 class 0x030000 PCIe Legacy Endpoint [ 6.731915] pci 0000:01:00.0: BAR 0 [mem 0x76000000-0x76ffffff] pci 0000:01:00.0: BAR 1 [mem 0x4050000000-0x405fffffff 64bit pref] pci 0000:01:00.0: BAR 3 [mem 0x4060000000-0x4061ffffff 64bit pref] pci 0000:01:00.0: BAR 5 [io 0x5000-0x507f] pci 0000:01:00.0: ROM [mem 0x77000000-0x7707ffff pref] pci 0000:01:00.0: PME# supported from D0 D3hot [ 6.732172] pci 0000:01:00.1: [10de:22ba] type 00 class 0x040300 PCIe Endpoint [ 6.732216] pci 0000:01:00.1: BAR 0 [mem 0x77080000-0x77083fff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:1a.0: PCI bridge to [bus 02] pci 0000:00:1b.0: PCI bridge to [bus 03] pci 0000:04:00.0: [1d6a:94c0] type 00 class 0x020000 PCIe Endpoint [ 6.732412] pci 0000:04:00.0: BAR 0 [mem 0x77800000-0x7787ffff 64bit] pci 0000:04:00.0: BAR 2 [mem 0x778a0000-0x778a0fff 64bit] pci 0000:04:00.0: BAR 4 [mem 0x77400000-0x777fffff 64bit] pci 0000:04:00.0: ROM [mem 0x77880000-0x7789ffff pref] pci 0000:04:00.0: supports D1 D2 [ 6.732601] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold [ 6.732643] pci 0000:04:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.506 Gb/s with 16.0 GT/s PCIe x2 link) [ 6.732678] pci 0000:00:1c.0: PCI bridge to [bus 04] pci 0000:05:00.0: [8086:2725] type 00 class 0x028000 PCIe Endpoint [ 6.732752] pci 0000:05:00.0: BAR 0 [mem 0x79000000-0x79003fff 64bit] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 6.732825] pci 0000:00:1c.2: PCI bridge to [bus 05] pci 0000:06:00.0: [8086:125c] type 00 class 0x020000 PCIe Endpoint [ 6.732900] pci 0000:06:00.0: BAR 0 [mem 0x78e00000-0x78efffff] pci 0000:06:00.0: BAR 3 [mem 0x78f00000-0x78f03fff] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 6.733008] pci 0000:00:1c.3: PCI bridge to [bus 06] pci 0000:07:00.0: [8086:1136] type 01 class 0x060400 PCIe Switch Upstream Port [ 6.733085] pci 0000:07:00.0: PCI bridge to [bus 08-70] pci 0000:07:00.0: bridge window [mem 0x44000000-0x71efffff] pci 0000:07:00.0: bridge window [mem 0x4000000000-0x404a0fffff 64bit pref] pci 0000:07:00.0: enabling Extended Tags [ 6.733234] pci 0000:07:00.0: supports D1 D2 [ 6.733271] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 6.733307] pci 0000:07:00.0: PTM enabled, 4ns granularity [ 6.733343] pci 0000:00:1c.4: PCI bridge to [bus 07-70] pci 0000:08:00.0: [8086:1136] type 01 class 0x060400 PCIe Switch Downstream Port [ 6.733422] pci 0000:08:00.0: PCI bridge to [bus 09] pci 0000:08:00.0: bridge window [mem 0x404a000000-0x404a0fffff 64bit pref] pci 0000:08:00.0: enabling Extended Tags [ 6.733530] pci 0000:08:00.0: supports D1 D2 [ 6.733566] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 6.733604] pci 0000:08:01.0: [8086:1136] type 01 class 0x060400 PCIe Switch Downstream Port [ 6.733639] pci 0000:08:01.0: PCI bridge to [bus 0a-3c] pci 0000:08:01.0: bridge window [mem 0x5af00000-0x71dfffff] pci 0000:08:01.0: bridge window [mem 0x4025000000-0x4049ffffff 64bit pref] pci 0000:08:01.0: enabling Extended Tags [ 6.733779] pci 0000:08:01.0: supports D1 D2 [ 6.733814] pci 0000:08:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 6.733851] pci 0000:08:02.0: [8086:1136] type 01 class 0x060400 PCIe Switch Downstream Port [ 6.733886] pci 0000:08:02.0: PCI bridge to [bus 3d] pci 0000:08:02.0: bridge window [mem 0x71e00000-0x71efffff] pci 0000:08:02.0: enabling Extended Tags [ 6.733992] pci 0000:08:02.0: supports D1 D2 [ 6.734029] pci 0000:08:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 6.734066] pci 0000:08:03.0: [8086:1136] type 01 class 0x060400 PCIe Switch Downstream Port [ 6.734101] pci 0000:08:03.0: PCI bridge to [bus 3e-70] pci 0000:08:03.0: bridge window [mem 0x44000000-0x5aefffff] pci 0000:08:03.0: bridge window [mem 0x4000000000-0x4024ffffff 64bit pref] pci 0000:08:03.0: enabling Extended Tags [ 6.734240] pci 0000:08:03.0: supports D1 D2 [ 6.734275] pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 6.734309] pci 0000:07:00.0: PCI bridge to [bus 08-70] pci 0000:09:00.0: [8086:1137] type 00 class 0x0c0340 PCIe Endpoint [ 6.734388] pci 0000:09:00.0: BAR 0 [mem 0x404a000000-0x404a03ffff 64bit pref] pci 0000:09:00.0: BAR 2 [mem 0x404a040000-0x404a040fff 64bit pref] pci 0000:09:00.0: enabling Extended Tags [ 6.734495] pci 0000:09:00.0: supports D1 D2 [ 6.734531] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 6.734569] pci 0000:08:00.0: PCI bridge to [bus 09] pci 0000:08:01.0: PCI bridge to [bus 0a-3c] pci 0000:3d:00.0: [8086:1138] type 00 class 0x0c0330 PCIe Endpoint [ 6.734680] pci 0000:3d:00.0: BAR 0 [mem 0x71e00000-0x71e0ffff 64bit] pci 0000:3d:00.0: enabling Extended Tags [ 6.734752] pci 0000:3d:00.0: PME# supported from D3hot D3cold [ 6.734788] pci 0000:08:02.0: PCI bridge to [bus 3d] pci 0000:08:03.0: PCI bridge to [bus 3e-70] pci 0000:00:1d.0: PCI bridge to [bus 71] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 6.734863] ACPI: PCI: Interrupt link LNKB configured for IRQ 1 [ 6.734865] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 6.734868] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 6.734870] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 6.734872] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 6.734874] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 6.734876] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 6.734878] ACPI: EC: interrupt unblocked [ 6.734881] ACPI: EC: event unblocked [ 6.734883] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 6.734885] ACPI: EC: GPE=0x7 [ 6.734888] ACPI: \_SB_.PC00.LPCB.EC0_: Boot DSDT EC initialization complete [ 6.734890] ACPI: \_SB_.PC00.LPCB.EC0_: EC: Used to handle transactions and events [ 6.734892] iommu: Default domain type: Translated [ 6.734894] iommu: DMA domain TLB invalidation policy: strict mode [ 6.734896] pps_core: LinuxPPS API ver. 1 registered [ 6.734899] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 6.734901] PTP clock support registered [ 6.734904] efivars: Registered efivars operations [ 6.734906] mctp: management component transport protocol core [ 6.734908] NET: Registered PF_MCTP protocol family [ 6.734910] PCI: Using ACPI for IRQ routing [ 6.734912] PCI: pci_cache_line_size set to 64 bytes [ 6.734945] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window [ 6.734948] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] e820: reserve RAM buffer [mem 0x18618018-0x1bffffff] e820: reserve RAM buffer [mem 0x1862b018-0x1bffffff] e820: reserve RAM buffer [mem 0x2987c000-0x2bffffff] e820: reserve RAM buffer [mem 0x2c6cf000-0x2fffffff] e820: reserve RAM buffer [mem 0x33f00000-0x33ffffff] e820: reserve RAM buffer [mem 0x10bf800000-0x10bfffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 6.735045] pci 0000:01:00.0: vgaarb: bridge control possible [ 6.735079] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 6.735082] vgaarb: loaded [ 6.735085] clocksource: Switched to clocksource tsc-early [ 6.735087] VFS: Disk quotas dquot_6.6.0 [ 6.735090] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 6.735092] pnp: PnP ACPI init [ 6.735130] system 00:00: [io 0x0290-0x029f] has been reserved [ 6.735164] system 00:00: [io 0x0b00-0x0b1f] has been reserved [ 6.735198] pnp 00:01: [dma 0 disabled] system 00:02: [io 0x0680-0x069f] has been reserved [ 6.735265] system 00:02: [io 0x164e-0x164f] has been reserved [ 6.735300] system 00:03: [io 0x1854-0x1857] has been reserved [ 6.735334] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 6.735366] system 00:04: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 6.735398] system 00:04: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 6.735430] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved [ 6.735461] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 6.735493] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 6.735524] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 6.735555] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 6.735589] system 00:05: [io 0x2000-0x20fe] has been reserved [ 6.735592] pnp: PnP ACPI: found 7 devices [ 6.735595] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 6.735597] NET: Registered PF_INET protocol family [ 6.735599] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 6.735602] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 6.735604] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 6.735606] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 6.735609] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 6.735611] TCP: Hash tables configured (established 524288 bind 65536) [ 6.735613] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear) [ 6.735616] UDP hash table entries: 32768 (order: 9, 2097152 bytes, linear) [ 6.735619] UDP-Lite hash table entries: 32768 (order: 9, 2097152 bytes, linear) [ 6.735621] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 6.735623] NET: Registered PF_XDP protocol family [ 6.735659] pci 0000:08:01.0: bridge window [io 0x1000-0x0fff] to [bus 0a-3c] add_size 1000 [ 6.735695] pci 0000:08:03.0: bridge window [io 0x1000-0x0fff] to [bus 3e-70] add_size 1000 [ 6.735730] pci 0000:07:00.0: bridge window [io 0x1000-0x0fff] to [bus 08-70] add_size 2000 [ 6.735765] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 07-70] add_size 3000 [ 6.735799] pci 0000:00:15.0: BAR 0 [mem 0x404a100000-0x404a100fff 64bit]: assigned [ 6.735834] pci 0000:00:15.1: BAR 0 [mem 0x404a101000-0x404a101fff 64bit]: assigned [ 6.735868] pci 0000:00:15.2: BAR 0 [mem 0x404a102000-0x404a102fff 64bit]: assigned [ 6.735902] pci 0000:00:1c.4: bridge window [io 0x6000-0x8fff]: assigned [ 6.735937] pci 0000:00:1f.5: BAR 0 [mem 0x40800000-0x40800fff]: assigned [ 6.735970] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff] pci 0000:00:01.0: bridge window [mem 0x76000000-0x770fffff] pci 0000:00:01.0: bridge window [mem 0x4050000000-0x4061ffffff 64bit pref] pci 0000:00:1a.0: PCI bridge to [bus 02] pci 0000:00:1a.0: bridge window [io 0x4000-0x4fff] pci 0000:00:1a.0: bridge window [mem 0x78400000-0x78dfffff] pci 0000:00:1a.0: bridge window [mem 0x4062b00000-0x40634fffff 64bit pref] pci 0000:00:1b.0: PCI bridge to [bus 03] pci 0000:00:1c.0: PCI bridge to [bus 04] pci 0000:00:1c.0: bridge window [mem 0x77400000-0x778fffff] pci 0000:00:1c.2: PCI bridge to [bus 05] pci 0000:00:1c.2: bridge window [mem 0x79000000-0x790fffff] pci 0000:00:1c.3: PCI bridge to [bus 06] pci 0000:00:1c.3: bridge window [mem 0x78e00000-0x78ffffff] pci 0000:07:00.0: bridge window [io 0x6000-0x7fff]: assigned [ 6.736522] pci 0000:08:01.0: bridge window [io 0x6000-0x6fff]: assigned [ 6.736557] pci 0000:08:03.0: bridge window [io 0x7000-0x7fff]: assigned [ 6.736592] pci 0000:08:00.0: PCI bridge to [bus 09] pci 0000:08:00.0: bridge window [mem 0x404a000000-0x404a0fffff 64bit pref] pci 0000:08:01.0: PCI bridge to [bus 0a-3c] pci 0000:08:01.0: bridge window [io 0x6000-0x6fff] pci 0000:08:01.0: bridge window [mem 0x5af00000-0x71dfffff] pci 0000:08:01.0: bridge window [mem 0x4025000000-0x4049ffffff 64bit pref] pci 0000:08:02.0: PCI bridge to [bus 3d] pci 0000:08:02.0: bridge window [mem 0x71e00000-0x71efffff] pci 0000:08:03.0: PCI bridge to [bus 3e-70] pci 0000:08:03.0: bridge window [io 0x7000-0x7fff] pci 0000:08:03.0: bridge window [mem 0x44000000-0x5aefffff] pci 0000:08:03.0: bridge window [mem 0x4000000000-0x4024ffffff 64bit pref] pci 0000:07:00.0: PCI bridge to [bus 08-70] pci 0000:07:00.0: bridge window [io 0x6000-0x7fff] pci 0000:07:00.0: bridge window [mem 0x44000000-0x71efffff] pci 0000:07:00.0: bridge window [mem 0x4000000000-0x404a0fffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 07-70] pci 0000:00:1c.4: bridge window [io 0x6000-0x8fff] pci 0000:00:1c.4: bridge window [mem 0x44000000-0x720fffff] pci 0000:00:1c.4: bridge window [mem 0x4000000000-0x404a0fffff 64bit pref] pci 0000:00:1d.0: PCI bridge to [bus 71] pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1d.0: bridge window [mem 0x77a00000-0x783fffff] pci 0000:00:1d.0: bridge window [mem 0x4062100000-0x4062afffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff window] pci_bus 0000:00: resource 8 [mem 0x40800000-0xbfffffff window] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] pci_bus 0000:01: resource 1 [mem 0x76000000-0x770fffff] pci_bus 0000:01: resource 2 [mem 0x4050000000-0x4061ffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] pci_bus 0000:02: resource 1 [mem 0x78400000-0x78dfffff] pci_bus 0000:02: resource 2 [mem 0x4062b00000-0x40634fffff 64bit pref] pci_bus 0000:04: resource 1 [mem 0x77400000-0x778fffff] pci_bus 0000:05: resource 1 [mem 0x79000000-0x790fffff] pci_bus 0000:06: resource 1 [mem 0x78e00000-0x78ffffff] pci_bus 0000:07: resource 0 [io 0x6000-0x8fff] pci_bus 0000:07: resource 1 [mem 0x44000000-0x720fffff] pci_bus 0000:07: resource 2 [mem 0x4000000000-0x404a0fffff 64bit pref] pci_bus 0000:08: resource 0 [io 0x6000-0x7fff] pci_bus 0000:08: resource 1 [mem 0x44000000-0x71efffff] pci_bus 0000:08: resource 2 [mem 0x4000000000-0x404a0fffff 64bit pref] pci_bus 0000:09: resource 2 [mem 0x404a000000-0x404a0fffff 64bit pref] pci_bus 0000:0a: resource 0 [io 0x6000-0x6fff] pci_bus 0000:0a: resource 1 [mem 0x5af00000-0x71dfffff] pci_bus 0000:0a: resource 2 [mem 0x4025000000-0x4049ffffff 64bit pref] pci_bus 0000:3d: resource 1 [mem 0x71e00000-0x71efffff] pci_bus 0000:3e: resource 0 [io 0x7000-0x7fff] pci_bus 0000:3e: resource 1 [mem 0x44000000-0x5aefffff] pci_bus 0000:3e: resource 2 [mem 0x4000000000-0x4024ffffff 64bit pref] pci_bus 0000:71: resource 0 [io 0x3000-0x3fff] pci_bus 0000:71: resource 1 [mem 0x77a00000-0x783fffff] pci_bus 0000:71: resource 2 [mem 0x4062100000-0x4062afffff 64bit pref] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec [ 6.738512] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 6.738514] PCI: CLS 64 bytes, default 64 [ 6.738517] DMAR: Intel-IOMMU force enabled due to platform opt in [ 6.738520] DMAR: No RMRR found [ 6.738522] DMAR: No ATSR found [ 6.738524] DMAR: No SATC found [ 6.738526] DMAR: dmar0: Using Queued invalidation [ 6.738528] Trying to unpack rootfs image as initramfs... [ 6.738561] pci 0000:00:00.0: Adding to iommu group 0 [ 6.738594] pci 0000:00:01.0: Adding to iommu group 1 [ 6.738627] pci 0000:00:06.0: Adding to iommu group 2 [ 6.738661] pci 0000:00:0a.0: Adding to iommu group 3 [ 6.738694] pci 0000:00:0e.0: Adding to iommu group 4 [ 6.738727] pci 0000:00:14.0: Adding to iommu group 5 [ 6.738760] pci 0000:00:14.2: Adding to iommu group 5 [ 6.738792] pci 0000:00:15.0: Adding to iommu group 6 [ 6.738826] pci 0000:00:15.1: Adding to iommu group 6 [ 6.738859] pci 0000:00:15.2: Adding to iommu group 6 [ 6.738893] pci 0000:00:16.0: Adding to iommu group 7 [ 6.738926] pci 0000:00:17.0: Adding to iommu group 8 [ 6.738960] pci 0000:00:1a.0: Adding to iommu group 9 [ 6.738993] pci 0000:00:1b.0: Adding to iommu group 10 [ 6.739027] pci 0000:00:1c.0: Adding to iommu group 11 [ 6.739060] pci 0000:00:1c.2: Adding to iommu group 12 [ 6.739093] pci 0000:00:1c.3: Adding to iommu group 13 [ 6.739126] pci 0000:00:1c.4: Adding to iommu group 14 [ 6.739158] pci 0000:00:1d.0: Adding to iommu group 15 [ 6.739191] pci 0000:00:1f.0: Adding to iommu group 16 [ 6.739224] pci 0000:00:1f.3: Adding to iommu group 16 [ 6.739257] pci 0000:00:1f.4: Adding to iommu group 16 [ 6.739289] pci 0000:00:1f.5: Adding to iommu group 16 [ 6.739323] pci 0000:01:00.0: Adding to iommu group 17 [ 6.739357] pci 0000:01:00.1: Adding to iommu group 17 [ 6.739391] pci 0000:04:00.0: Adding to iommu group 18 [ 6.739424] pci 0000:05:00.0: Adding to iommu group 19 [ 6.739458] pci 0000:06:00.0: Adding to iommu group 20 [ 6.739493] pci 0000:07:00.0: Adding to iommu group 21 [ 6.739530] pci 0000:08:00.0: Adding to iommu group 22 [ 6.739565] pci 0000:08:01.0: Adding to iommu group 23 [ 6.739601] pci 0000:08:02.0: Adding to iommu group 24 [ 6.739636] pci 0000:08:03.0: Adding to iommu group 25 [ 6.739671] pci 0000:09:00.0: Adding to iommu group 26 [ 6.739707] pci 0000:3d:00.0: Adding to iommu group 27 [ 6.739710] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 6.739712] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 6.739714] software IO TLB: mapped [mem 0x0000000021dee000-0x0000000025dee000] (64MB) [ 6.739717] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b2c8ec87c7, max_idle_ns: 440795278598 ns [ 6.739720] clocksource: Switched to clocksource tsc [ 6.739758] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 6.739761] Initialise system trusted keyrings [ 6.739763] Key type blacklist registered [ 6.739766] workingset: timestamp_bits=36 max_order=24 bucket_order=0 [ 6.739768] zbud: loaded [ 6.739770] NET: Registered PF_ALG protocol family [ 6.739773] Key type asymmetric registered [ 6.739775] Asymmetric key parser 'x509' registered [ 6.739777] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 6.739779] io scheduler mq-deadline registered [ 6.739782] io scheduler bfq registered [ 6.739784] ledtrig-cpu: registered to indicate activity on CPUs [ 6.739817] pcieport 0000:00:01.0: PME: Signaling with IRQ 121 [ 6.739850] pcieport 0000:00:01.0: AER: enabled with IRQ 121 [ 6.739885] pcieport 0000:00:1a.0: PME: Signaling with IRQ 122 [ 6.739918] pcieport 0000:00:1a.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 6.739951] pcieport 0000:00:1b.0: PME: Signaling with IRQ 123 [ 6.739984] pcieport 0000:00:1c.0: PME: Signaling with IRQ 124 [ 6.740019] pcieport 0000:00:1c.0: AER: enabled with IRQ 124 [ 6.740052] pcieport 0000:00:1c.2: PME: Signaling with IRQ 125 [ 6.740086] pcieport 0000:00:1c.2: AER: enabled with IRQ 125 [ 6.740119] pcieport 0000:00:1c.3: PME: Signaling with IRQ 126 [ 6.740152] pcieport 0000:00:1c.3: AER: enabled with IRQ 126 [ 6.740185] pcieport 0000:00:1c.4: PME: Signaling with IRQ 127 [ 6.740219] pcieport 0000:00:1c.4: AER: enabled with IRQ 127 [ 6.740253] pcieport 0000:00:1c.4: pciehp: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 6.740286] pcieport 0000:00:1d.0: PME: Signaling with IRQ 128 [ 6.740319] pcieport 0000:00:1d.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 6.740355] pcieport 0000:08:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 6.740393] pcieport 0000:08:03.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 6.740396] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.740398] Monitor-Mwait will be used to enter C-1 state [ 6.740400] Monitor-Mwait will be used to enter C-2 state [ 6.740403] Monitor-Mwait will be used to enter C-3 state [ 6.740405] hpet_acpi_add: no address or irqs in _CRS [ 6.740407] loop: module loaded [ 6.740409] i8042: PNP: No PS/2 controller found. [ 6.740442] rtc_cmos rtc_cmos: RTC can wake from S4 [ 6.740477] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 6.740511] mei_me 0000:00:14.0: H_RST is not set = 0x19000840 [ 6.740545] rtc_cmos rtc_cmos: registered as rtc0 [ 6.740577] rtc_cmos rtc_cmos: setting system clock to 2025-09-14T21:36:38 UTC (1757885798) [ 6.740611] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 6.740614] intel_pstate: Intel P-state driver initializing [ 6.740616] intel_pstate: HWP enabled [ 6.740618] Key type dns_resolver registered [ 6.740621] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 6.740624] microcode: Current revision: 0x0000012f [ 6.740626] IPI shorthand broadcast: enabled [ 6.740628] sched_clock: Marking stable (404002229, 6203379)->(459573675, -49368067) [ 6.740630] registered taskstats version 1 [ 6.740633] Loading compiled-in X.509 certificates [ 6.740635] Freeing initrd memory: 155892K [ 6.740637] Loaded X.509 cert 'Build time autogenerated kernel key: 8787b7863b0204a42246a0ff0fbed00d24091253' [ 6.740639] Demotion targets for Node 0: null [ 6.740642] Key type .fscrypt registered [ 6.740645] Key type fscrypt-provisioning registered [ 6.740647] RAS: Correctable Errors collector initialized. [ 6.740680] mei_me 0000:00:14.0: wait hw ready failed [ 6.740715] mei_me 0000:00:14.0: hw_start failed ret = -62 fw status = 803401FD 00000000 00006032 00000000 00000000 00000000 [ 6.740749] mei_me 0000:00:14.0: H_RST is not set = 0x19000840 [ 6.740782] mei_me 0000:00:14.0: wait hw ready failed [ 6.740815] mei_me 0000:00:14.0: hw_start failed ret = -62 fw status = 803401FD 00000000 00006032 00000000 00000000 00000000 [ 6.740848] mei_me 0000:00:14.0: H_RST is not set = 0x19000840 [ 6.740883] mei_me 0000:00:14.0: wait hw ready failed [ 6.740916] mei_me 0000:00:14.0: hw_start failed ret = -62 fw status = 803401FD 00000000 00006032 00000000 00000000 00000000 [ 6.740949] mei_me 0000:00:14.0: reset: reached maximal consecutive resets: disabling the device [ 6.740981] mei_me 0000:00:14.0: reset failed ret = -19 [ 6.741015] mei_me 0000:00:14.0: link layer initialization failed. [ 6.741048] mei_me 0000:00:14.0: init hw failure. [ 6.741081] mei_me 0000:00:14.0: initialization failed. [ 6.741083] clk: Disabling unused clocks [ 6.741086] PM: genpd: Disabling unused power domains [ 6.741088] Freeing unused decrypted memory: 2028K [ 6.741091] Freeing unused kernel image (initmem) memory: 2952K [ 6.741093] Write protecting the kernel read-only data: 24576k [ 6.741095] Freeing unused kernel image (text/rodata gap) memory: 1224K [ 6.741097] Freeing unused kernel image (rodata/data gap) memory: 940K [ 6.741099] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 6.741102] Run /init as init process [ 6.741104] with arguments: [ 6.741107] /init [ 6.741109] splash [ 6.741111] with environment: [ 6.741113] HOME=/ [ 6.741115] TERM=linux [ 6.741117] BOOT_IMAGE=/@boot/vmlinuz-6.14.2-desktop-3omv2590 [ 6.741119] audit=0 [ 6.741125] NET: Registered PF_INET6 protocol family [ 6.741127] Segment Routing with IPv6 [ 6.741129] RPL Segment Routing with IPv6 [ 6.741132] In-situ OAM (IOAM) with IPv6 [ 6.741208] i2c_dev: i2c /dev entries driver [ 7.446022] device-mapper: uevent: version 1.0.3 [ 7.446066] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: XXX@XXX [ 7.460013] xor: automatically using best checksumming function avx [ 7.482003] raid6: avx2x4 gen() 61538 MB/s [ 7.499008] raid6: avx2x2 gen() 69410 MB/s [ 7.516009] raid6: avx2x1 gen() 70135 MB/s [ 7.516029] raid6: using algorithm avx2x1 gen() 70135 MB/s [ 7.533003] raid6: .... xor() 46689 MB/s, rmw enabled [ 7.533008] raid6: using avx2x2 recovery algorithm [ 7.559009] Btrfs loaded, zoned=yes, fsverity=yes [ 7.566013] ACPI: bus type USB registered [ 7.566040] usbcore: registered new interface driver usbfs [ 7.566046] usbcore: registered new interface driver hub [ 7.566049] usbcore: registered new device driver usb [ 7.831007] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 7.831030] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 7.831047] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 7.836009] ACPI: button: Power Button [PWRF] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 7.836031] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0 [ 8.017163] pci_bus 10000:e0: root bus resource [bus e0-ff] pci_bus 10000:e0: root bus resource [mem 0x74000000-0x75ffffff] pci_bus 10000:e0: root bus resource [mem 0x4066102000-0x40661fffff 64bit] pci 10000:e0:06.0: [8086:a74d] type 01 class 0x060400 PCIe Root Port [ 8.017509] pci 10000:e0:06.0: PCI bridge to [bus e1] pci 10000:e0:06.0: bridge window [io 0x0000-0x0fff] pci 10000:e0:06.0: bridge window [mem 0x74100000-0x741fffff] pci 10000:e0:06.0: PME# supported from D0 D3hot D3cold [ 8.017717] pci 10000:e0:06.0: PTM enabled (root), 4ns granularity [ 8.017761] pci 10000:e0:06.0: Adding to iommu group 4 [ 8.017808] pci 10000:e0:17.0: [8086:7a62] type 00 class 0x010601 conventional PCI endpoint [ 8.017862] pci 10000:e0:17.0: BAR 0 [mem 0x00000000-0x00001fff] pci 10000:e0:17.0: BAR 1 [mem 0x00000000-0x000000ff] pci 10000:e0:17.0: BAR 2 [io 0x0000-0x0007] pci 10000:e0:17.0: BAR 3 [io 0x0000-0x0003] pci 10000:e0:17.0: BAR 4 [io 0x0000-0x001f] pci 10000:e0:17.0: BAR 5 [mem 0x74000000-0x740007ff] pci 10000:e0:17.0: PME# supported from D3hot [ 8.018186] pci 10000:e0:17.0: Adding to iommu group 4 [ 8.018228] pci 10000:e0:1b.0: [8086:09ab] type 00 class 0x088000 conventional PCI endpoint [ 8.018272] pci 10000:e0:1b.0: Adding to iommu group 4 [ 8.018315] pci 10000:e0:1b.4: [8086:7a44] type 01 class 0x060400 PCIe Root Port [ 8.018365] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 8.018368] pci 10000:e0:1b.4: PCI bridge to [bus e2] pci 10000:e0:1b.4: bridge window [io 0x0000-0x0fff] pci 10000:e0:1b.4: bridge window [mem 0x74200000-0x742fffff] pci 10000:e0:1b.4: PME# supported from D0 D3hot D3cold [ 8.018561] pci 10000:e0:1b.4: PTM enabled (root), 4ns granularity [ 8.018604] pci 10000:e0:1b.4: Adding to iommu group 4 [ 8.018647] pci 10000:e0:06.0: Primary bus is hard wired to 0 [ 8.018688] pci 10000:e1:00.0: [15b7:5030] type 00 class 0x010802 PCIe Endpoint [ 8.018738] pci 10000:e1:00.0: BAR 0 [mem 0x74100000-0x74103fff 64bit] pci 10000:e1:00.0: Adding to iommu group 4 [ 8.018828] pci 10000:e0:06.0: PCI bridge to [bus e1] pci 10000:e0:1b.4: Primary bus is hard wired to 0 [ 8.018921] pci 10000:e2:00.0: [15b7:5030] type 00 class 0x010802 PCIe Endpoint [ 8.018969] pci 10000:e2:00.0: BAR 0 [mem 0x74200000-0x74203fff 64bit] pci 10000:e2:00.0: Adding to iommu group 4 [ 8.019070] pci 10000:e0:1b.4: PCI bridge to [bus e2] pci 10000:e0:06.0: Primary bus is hard wired to 0 [ 8.019153] pci 10000:e0:1b.4: Primary bus is hard wired to 0 [ 8.019194] cryptd: max_cpu_qlen set to 1000 [ 8.019197] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 8.019239] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 8.019278] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 [ 8.019318] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 8.019358] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 8.019398] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed [ 8.019437] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 40.236992] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 40.237354] usb usb1: Product: xHCI Host Controller [ 40.237582] usb usb1: Manufacturer: Linux 6.14.2-desktop-3omv2590 xhci-hcd [ 40.237818] usb usb1: SerialNumber: ... [ 40.238056] AES CTR mode by8 optimization enabled [ 40.238072] hub 1-0:1.0: USB hub found [ 40.238364] hub 1-0:1.0: 16 ports detected [ 40.238605] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14 [ 40.238836] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 40.239079] usb usb2: Product: xHCI Host Controller [ 40.239299] usb usb2: Manufacturer: Linux 6.14.2-desktop-3omv2590 xhci-hcd [ 40.239514] usb usb2: SerialNumber: ... [ 40.239738] hub 2-0:1.0: USB hub found [ 40.239977] hub 2-0:1.0: 9 ports detected [ 40.240206] xhci_hcd 0000:3d:00.0: xHCI Host Controller [ 40.240456] xhci_hcd 0000:3d:00.0: new USB bus registered, assigned bus number 3 [ 40.240681] xhci_hcd 0000:3d:00.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000200009810 [ 40.240907] xhci_hcd 0000:3d:00.0: xHCI Host Controller [ 40.241156] xhci_hcd 0000:3d:00.0: new USB bus registered, assigned bus number 4 [ 40.241388] xhci_hcd 0000:3d:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 40.241623] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 40.241867] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 40.242105] usb usb3: Product: xHCI Host Controller [ 40.242336] usb usb3: Manufacturer: Linux 6.14.2-desktop-3omv2590 xhci-hcd [ 40.242566] usb usb3: SerialNumber: ... [ 40.242782] hub 3-0:1.0: USB hub found [ 40.243066] hub 3-0:1.0: 2 ports detected [ 40.243304] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14 [ 40.243552] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 40.243778] usb usb4: Product: xHCI Host Controller [ 40.244009] usb usb4: Manufacturer: Linux 6.14.2-desktop-3omv2590 xhci-hcd [ 40.244237] usb usb4: SerialNumber: ... [ 40.244458] hub 4-0:1.0: USB hub found [ 40.244710] hub 4-0:1.0: 2 ports detected [ 40.244946] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006) [ 40.245169] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 40.245272] ACPI: bus type drm_connector registered [ 40.245275] Linux agpgart interface v0.103 [ 40.245278] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006) [ 40.245328] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 40.245387] intel-lpss 0000:00:15.2: enabling device (0004 -> 0006) [ 40.245447] idma64 idma64.2: Found Intel integrated DMA 64-bit [ 40.245487] ACPI: \_SB_.PC00.PEG1.PEGP: failed to evaluate _DSM [ 40.245491] pci 10000:e0:06.0: bridge window [mem 0x74000000-0x740fffff]: assigned [ 40.245537] pci 10000:e0:1b.4: bridge window [mem 0x74100000-0x741fffff]: assigned [ 40.245584] pci 10000:e0:17.0: BAR 0 [mem 0x74200000-0x74201fff]: assigned [ 40.245629] pci 10000:e0:06.0: bridge window [io size 0x1000]: can't assign; no space [ 40.245680] pci 10000:e0:06.0: bridge window [io size 0x1000]: failed to assign [ 40.245724] pci 10000:e0:1b.4: bridge window [io size 0x1000]: can't assign; no space [ 40.245769] pci 10000:e0:1b.4: bridge window [io size 0x1000]: failed to assign [ 40.245813] pci 10000:e0:17.0: BAR 5 [mem 0x74202000-0x742027ff]: assigned [ 40.245865] pci 10000:e0:17.0: BAR 1 [mem 0x74202800-0x742028ff]: assigned [ 40.245910] pci 10000:e0:17.0: BAR 4 [io size 0x0020]: can't assign; no space [ 40.245955] pci 10000:e0:17.0: BAR 4 [io size 0x0020]: failed to assign [ 40.246004] pci 10000:e0:17.0: BAR 2 [io size 0x0008]: can't assign; no space [ 40.246054] pci 10000:e0:17.0: BAR 2 [io size 0x0008]: failed to assign [ 40.246104] pci 10000:e0:17.0: BAR 3 [io size 0x0004]: can't assign; no space [ 40.246146] pci 10000:e0:17.0: BAR 3 [io size 0x0004]: failed to assign [ 40.246189] pci 10000:e1:00.0: BAR 0 [mem 0x74000000-0x74003fff 64bit]: assigned [ 40.246236] pci 10000:e0:06.0: PCI bridge to [bus e1] pci 10000:e0:06.0: bridge window [mem 0x74000000-0x740fffff] pci 10000:e2:00.0: BAR 0 [mem 0x74100000-0x74103fff 64bit]: assigned [ 40.246377] pci 10000:e0:1b.4: PCI bridge to [bus e2] pci 10000:e0:1b.4: bridge window [mem 0x74100000-0x741fffff] pcieport 10000:e0:06.0: can't derive routing for PCI INT D [ 40.246507] pcieport 10000:e0:06.0: PCI INT D: no GSI [ 40.246550] pcieport 10000:e0:06.0: PME: Signaling with IRQ 167 [ 40.246591] pcieport 10000:e0:06.0: AER: enabled with IRQ 167 [ 40.246632] pcieport 10000:e0:1b.4: can't derive routing for PCI INT A [ 40.246672] pcieport 10000:e0:1b.4: PCI INT A: no GSI [ 40.246713] pcieport 10000:e0:1b.4: PME: Signaling with IRQ 168 [ 40.246754] pcieport 10000:e0:1b.4: AER: enabled with IRQ 168 [ 40.246794] vmd 0000:00:0e.0: Bound to PCI domain 10000 [ 40.246834] SCSI subsystem initialized [ 40.246838] nvme nvme0: pci function 10000:e1:00.0 [ 40.246872] pcieport 10000:e0:06.0: can't derive routing for PCI INT A [ 40.246913] nvme 10000:e1:00.0: PCI INT A: no GSI [ 40.246957] nvme nvme1: pci function 10000:e2:00.0 [ 40.246992] pcieport 10000:e0:1b.4: can't derive routing for PCI INT A [ 40.247039] nvme 10000:e2:00.0: PCI INT A: no GSI [ 40.247081] libata version 3.00 loaded. [ 40.247085] nvme nvme0: 18/0/0 default/read/poll queues [ 40.247114] nvme nvme1: 18/0/0 default/read/poll queues [ 40.247142] nvme0n1: p1 p2 p3 [ 40.247145] nvme1n1: p1 [ 40.247148] ahci 10000:e0:17.0: version 3.0 [ 40.247190] ahci 10000:e0:17.0: can't derive routing for PCI INT A [ 40.247230] ahci 10000:e0:17.0: PCI INT A: no GSI [ 40.247271] ahci 10000:e0:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode [ 40.247311] ahci 10000:e0:17.0: 8/8 ports implemented (port mask 0xff) [ 40.247353] ahci 10000:e0:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds [ 40.247394] scsi host0: ahci [ 40.247437] scsi host1: ahci [ 40.247477] scsi host2: ahci [ 40.247515] scsi host3: ahci [ 40.247554] scsi host4: ahci [ 40.247592] scsi host5: ahci [ 40.247631] scsi host6: ahci [ 40.247669] scsi host7: ahci [ 40.247709] ata1: SATA max UDMA/133 abar m2048@0x74202000 port 0x74202100 irq 207 lpm-pol 0 [ 40.247713] ata2: SATA max UDMA/133 abar m2048@0x74202000 port 0x74202180 irq 207 lpm-pol 0 [ 40.247716] ata3: SATA max UDMA/133 abar m2048@0x74202000 port 0x74202200 irq 207 lpm-pol 0 [ 40.247719] ata4: SATA max UDMA/133 abar m2048@0x74202000 port 0x74202280 irq 207 lpm-pol 0 [ 40.247723] ata5: SATA max UDMA/133 abar m2048@0x74202000 port 0x74202300 irq 207 lpm-pol 0 [ 40.247726] ata6: SATA max UDMA/133 abar m2048@0x74202000 port 0x74202380 irq 207 lpm-pol 0 [ 40.247728] ata7: SATA max UDMA/133 abar m2048@0x74202000 port 0x74202400 irq 207 lpm-pol 0 [ 40.247731] ata8: SATA max UDMA/133 abar m2048@0x74202000 port 0x74202480 irq 207 lpm-pol 0 [ 40.247734] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 40.247791] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 40.247833] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 40.247876] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 40.247925] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 40.247972] usb 1-3: New USB device found, idVendor=1235, idProduct=8210, bcdDevice= 6.45 [ 40.248021] usb 1-3: New USB device strings: Mfr=1, Product=3, SerialNumber=... [ 40.248065] usb 1-3: Product: Scarlett 2i2 USB [ 40.248107] usb 1-3: Manufacturer: Focusrite [ 40.248148] usb 1-3: SerialNumber: ... [ 40.248188] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 40.248233] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd [ 40.248292] ata1: SATA link down (SStatus 4 SControl 300) [ 40.248295] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 40.248298] ata7: SATA link down (SStatus 4 SControl 300) [ 40.248301] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 40.248304] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 40.248307] ata8: SATA link down (SStatus 4 SControl 300) [ 40.248310] ata4: SATA link down (SStatus 4 SControl 300) [ 40.248313] ata2: SATA link down (SStatus 4 SControl 300) [ 40.248316] ata6.00: Model 'Samsung SSD 850 EVO 500GB', rev 'EMT03B6Q', applying quirks: noncqtrim zeroaftertrim [ 40.248319] ata5.00: Model 'Samsung SSD 850 EVO 500GB', rev 'EMT02B6Q', applying quirks: noncqtrim zeroaftertrim [ 40.248322] ata6.00: supports DRM functions and may not be fully accessible [ 40.248325] ata6.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT03B6Q, max UDMA/133 [ 40.248327] ata5.00: supports DRM functions and may not be fully accessible [ 40.248330] ata5.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133 [ 40.248333] ata6.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 40.248337] ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 40.248339] ------------[ cut here ]------------ [ 40.248343] WARNING: CPU: 9 PID: 746 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1520 r535_gsp_rpc_set_system_info+0x598/0x5d0 [nouveau] Modules linked in: ahci libahci libata nvme scsi_mod nvme_core nvme_auth scsi_common nouveau(+) mxm_wmi drm_gpuvm gpu_sched drm_exec drm_client_lib drm_display_helper cec rc_core i2c_algo_bit drm_ttm_helper drm_kms_helper ttm agpgart evdev drm polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 sha256_ssse3 sha1_ssse3 aesni_intel crypto_simd xhci_pci cryptd xhci_hcd ucsi_acpi typec_ucsi intel_lpss_pci drm_panel_orientation_quirks roles intel_lpss 8250 idma64 vmd intel_vsec typec 8250_base video serial_mctrl_gpio wmi pinctrl_alderlake button ehci_hcd usbcore usb_common btrfs raid6_pq xor dm_mirror dm_region_hash dm_log dm_mod tls msr i2c_dev i2c_core efivarfs tpm ecdh_generic ecc libaescfb dmi_sysfs ipv6 autofs4 [ 40.248351] CPU: 9 UID: 0 PID: 746 Comm: (udev-worker) Not tainted 6.14.2-desktop-3omv2590 #1 [ 40.248354] Hardware name: ASUS System Product Name/ProArt Z790-CREATOR WIFI, BIOS 3002 05/27/2025 [ 40.248357] RIP: 0010:r535_gsp_rpc_set_system_info+0x598/0x5d0 [nouveau] Code: 28 89 19 8b 44 24 30 89 41 04 c7 41 08 00 00 00 00 e9 9c fe ff ff 0f 0b e9 53 fc ff ff 0f 0b 41 bc da ff ff ff e9 2c fe ff ff <0f> 0b e9 36 fd ff ff 0f 0b e9 2f fd ff ff 0f 0b e9 31 fc ff ff 0f [ 40.248363] RSP: 0018:ffff96e340e5b500 EFLAGS: 00010293 [ 40.248366] RAX: ffff8a3ac1b91860 RBX: 0000000400000003 RCX: f9bd9747e579c900 [ 40.248369] RDX: 0000000000038009 RSI: 0000000000030040 RDI: ffff8a3ac1b8b240 [ 40.248372] RBP: ffff96e34dcbf31e R08: 0000000000000000 R09: ffff8a3ac1b91860 [ 40.248374] R10: 0000000000000016 R11: 0000000000000015 R12: ffff8a3acaf8f050 [ 40.248377] R13: 0000000000000040 R14: ffff8a3ac913c000 R15: ffff8a3ac19a56c0 [ 40.248380] FS: 00007f12daa8a880(0000) GS:ffff8a4a3f240000(0000) knlGS:0000000000000000 [ 40.248383] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.248386] CR2: 0000000000000000 CR3: 0000000110734003 CR4: 0000000000f70ef0 [ 40.248389] PKRU: 55555554 [ 40.248392] Call Trace: [ 40.248394] <TASK> [ 40.248397] ? force_dma_unencrypted+0x24/0x90 [ 40.248400] ? dma_direct_alloc+0xfe/0x290 [ 40.248403] r535_gsp_oneinit+0x442/0x540 [nouveau] nvkm_subdev_init_+0x3a/0xc0 [nouveau] ata5.00: Features: Trust Dev-Sleep NCQ-sndrcv [ 40.248412] nvkm_subdev_init+0x26/0x40 [nouveau] nvkm_device_init+0x17d/0x290 [nouveau] nvkm_udevice_init+0x31/0x50 [nouveau] nvkm_object_init+0x47/0x1b0 [nouveau] nvkm_ioctl_new+0x25e/0x340 [nouveau] ata5.00: supports DRM functions and may not be fully accessible [ 40.248429] ? __pfx_nvkm_client_child_new+0x10/0x10 [nouveau] ? __pfx_nvkm_udevice_new.llvm.4446274767876721180+0x10/0x10 [nouveau] nvkm_ioctl+0xf3/0x1f0 [nouveau] nvif_object_ctor+0x13c/0x2d0 [nouveau] ? nvif_client_ctor+0xd5/0x140 [nouveau] nvif_device_ctor+0x29/0x70 [nouveau] nouveau_drm_probe+0x2b5/0x460 [nouveau] pci_device_probe.llvm.2294325089552730714+0x1c1/0x280 [ 40.248453] really_probe+0x187/0x360 [ 40.248455] __driver_probe_device+0x72/0x110 [ 40.248458] driver_probe_device+0x19/0x160 [ 40.248462] __driver_attach.llvm.9607712242008340898+0xe3/0x1b0 [ 40.248464] ? __pfx___driver_attach.llvm.9607712242008340898+0x10/0x10 [ 40.248467] bus_for_each_dev+0x114/0x140 [ 40.248470] bus_add_driver+0x165/0x280 [ 40.248473] driver_register+0x62/0x100 [ 40.248476] init_module+0x1bd/0xff0 [nouveau] ? __pfx_init_module+0x10/0x10 [nouveau] do_one_initcall+0xc4/0x2b0 [ 40.248484] ? idr_alloc_cyclic+0x110/0x1a0 [ 40.248487] ? __kernfs_new_node+0xc7/0x230 [ 40.248490] ? kernfs_link_sibling+0xf6/0x110 [ 40.248493] ? kernfs_activate+0x27/0x140 [ 40.248496] ? kernfs_add_one+0x103/0x140 [ 40.248498] ? __kernfs_create_file+0x70/0xa0 [ 40.248501] ? sysfs_add_bin_file_mode_ns+0xd5/0x110 [ 40.248504] ? __slab_free+0x116/0x290 [ 40.248507] ? __slab_free+0x116/0x290 [ 40.248509] ? kfree+0x16b/0x230 [ 40.248512] ? kfree+0x16b/0x230 [ 40.248515] ? vfree+0xb6/0x210 [ 40.248518] ? load_module+0x12da/0x1420 [ 40.248521] do_init_module+0x5b/0x270 [ 40.248524] __se_sys_init_module+0xed/0x140 [ 40.248527] do_syscall_64+0x86/0x140 [ 40.248529] ? syscall_exit_to_user_mode+0x75/0xa0 [ 40.248532] ? do_syscall_64+0x92/0x140 [ 40.248535] ? do_user_addr_fault+0x305/0x640 [ 40.248538] ? exc_page_fault+0x5d/0xa0 [ 40.248541] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 40.248544] RIP: 0033:0x7f12db550a3a [ 40.248547] Code: 48 8b 0d c1 43 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8e 43 0d 00 f7 d8 64 89 01 48 [ 40.248550] RSP: 002b:00007ffd2dc1a328 EFLAGS: 00000206 ORIG_RAX: 00000000000000af [ 40.248553] RAX: ffffffffffffffda RBX: 00007f12d9e36deb RCX: 00007f12db550a3a [ 40.248556] RDX: 00007f12d9e36deb RSI: 00000000006e1679 RDI: 00007f12d7cba010 [ 40.248558] RBP: 0000000000000000 R08: 00000000000023c0 R09: 0000000000000000 [ 40.248561] R10: 00000000000023c1 R11: 0000000000000206 R12: 000055a634169560 [ 40.248564] R13: 000055a634164270 R14: 0000000000020000 R15: 000055a6341644b0 [ 40.248567] </TASK> [ 40.248570] ---[ end trace 0000000000000000 ]--- [ 40.248573] ata6.00: Features: Trust Dev-Sleep NCQ-sndrcv [ 40.248575] ata6.00: supports DRM functions and may not be fully accessible [ 40.248578] ata5.00: configured for UDMA/133 [ 40.248581] ata6.00: configured for UDMA/133 [ 40.248584] ata3.00: ATA-9: ST2000DX002-2DV164, CC41, max UDMA/133 [ 40.248586] ata3.00: NCQ Non-Data Log not supported [ 40.248589] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 40.248593] ata3.00: NCQ Non-Data Log not supported [ 40.248595] ata3.00: configured for UDMA/133 [ 40.248598] scsi 2:0:0:0: Direct-Access ATA ST2000DX002-2DV1 CC41 PQ: 0 ANSI: 5 [ 40.248642] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5 [ 40.248684] scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 3B6Q PQ: 0 ANSI: 5 [ 40.248725] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 40.248764] sd 5:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 40.248804] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 40.248843] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 40.248881] sd 4:0:0:0: [sdb] Write Protect is off [ 40.248919] sd 5:0:0:0: [sda] Write Protect is off [ 40.248957] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 40.248996] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 40.249037] sd 2:0:0:0: [sdc] Write Protect is off [ 40.249077] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 40.249116] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.249156] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.249195] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.249233] sd 2:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 40.249272] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 40.249310] sd 5:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 40.249348] sdc: sdc1 [ 40.249351] sdb: sdb1 sdb2 [ 40.249354] sd 2:0:0:0: [sdc] Attached SCSI disk [ 40.249392] sd 4:0:0:0: [sdb] Attached SCSI disk [ 40.249431] sda: [ 40.249433] sd 5:0:0:0: [sda] Attached SCSI disk [ 40.249474] usb 2-4: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1 [ 40.249518] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 40.249560] usb 2-4: Product: USB3.0 Hub [ 40.249602] usb 2-4: Manufacturer: VIA Labs, Inc. [ 40.249643] hub 2-4:1.0: USB hub found [ 40.249693] hub 2-4:1.0: 4 ports detected [ 40.249735] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 40.249778] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 40.249821] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 40.249869] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 40.249911] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 40.249967] usb 1-4: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 40.250012] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 40.250056] usb 1-4: Product: USB2.0 Hub [ 40.250097] usb 1-4: Manufacturer: VIA Labs, Inc. [ 40.250138] hub 1-4:1.0: USB hub found [ 40.250185] hub 1-4:1.0: 4 ports detected [ 40.250229] usb 2-5: new SuperSpeed USB device number 3 using xhci_hcd [ 40.250296] usb 2-5: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00 [ 40.250354] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 40.250397] usb 2-5: Product: Flash Drive FIT [ 40.250438] usb 2-5: Manufacturer: Samsung [ 40.250479] usb 2-5: SerialNumber: ... [ 40.250521] usb-storage 2-5:1.0: USB Mass Storage device detected [ 40.250568] scsi host8: usb-storage 2-5:1.0 [ 40.250609] usbcore: registered new interface driver usb-storage [ 40.250612] usbcore: registered new interface driver uas [ 40.250616] usb 1-10: new high-speed USB device number 4 using xhci_hcd [ 40.250672] nouveau 0000:01:00.0: drm: VRAM: 24564 MiB [ 40.250714] nouveau 0000:01:00.0: drm: GART: 536870912 MiB [ 40.250756] nouveau 0000:01:00.0: drm: MM: using COPY for buffer copies [ 40.250797] usb 1-10: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.90 [ 40.250839] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 40.250879] usb 1-10: Product: USB2.0 Hub [ 40.250920] usb 2-4.2: new SuperSpeed USB device number 4 using xhci_hcd [ 40.250977] usb 2-4.2: New USB device found, idVendor=0bda, idProduct=0409, bcdDevice= 0.06 [ 40.251025] usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 40.251069] usb 2-4.2: Product: USB3.2 Hub [ 40.251110] usb 2-4.2: Manufacturer: Generic [ 40.251150] usb 1-4.2: new high-speed USB device number 5 using xhci_hcd [ 40.251207] usb 1-4.2: New USB device found, idVendor=0bda, idProduct=5409, bcdDevice= 0.06 [ 40.251250] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 40.251290] usb 1-4.2: Product: USB2.1 Hub [ 40.251331] usb 1-4.2: Manufacturer: Generic [ 40.251372] scsi 8:0:0:0: Direct-Access Samsung Flash Drive FIT 1100 PQ: 0 ANSI: 6 [ 40.251416] sd 8:0:0:0: [sdd] 250626566 512-byte logical blocks: (128 GB/120 GiB) [ 40.251459] sd 8:0:0:0: [sdd] Write Protect is off [ 40.251498] sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00 [ 40.251538] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 40.251580] sdd: sdd1 sdd2 [ 40.251583] sd 8:0:0:0: [sdd] Attached SCSI removable disk [ 40.251622] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 40.251666] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 40.251714] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 40.251758] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 40.251805] Key type encrypted registered [ 40.251808] ACPI Error: Aborting method \_SB.PC00.PEG1.PEGP._DSM due to previous error (AE_AML_LOOP_TIMEOUT) (20240827/psparse-531) [ 40.251812] ACPI: \_SB_.PC00.PEG1.PEGP: failed to evaluate _DSM HASH_9FE-4974-C12E-86EF-C46AB67ABC05 rev:258 func:20 (0x3021) [ 40.251815] ACPI: \_SB_.PC00.PEG1.PEGP: failed to evaluate _DSM [ 40.251818] hub 1-4.2:1.0: USB hub found [ 40.251867] hub 1-4.2:1.0: 5 ports detected [ 40.251911] hub 2-4.2:1.0: USB hub found [ 40.251957] hub 1-10:1.0: USB hub found [ 40.252010] hub 1-10:1.0: 4 ports detected [ 40.252055] hub 2-4.2:1.0: 4 ports detected [ 40.252098] nouveau 0000:01:00.0: [drm] Registered 4 planes with drm panic [ 40.252141] [drm] Initialized nouveau 1.4.0 for 0000:01:00.0 on minor 0 [ 40.252144] fbcon: nouveaudrmfb (fb0) is primary device [ 40.252147] usb 1-11: new full-speed USB device number 6 using xhci_hcd [ 40.252206] Console: switching to colour frame buffer device 215x45 [ 40.252209] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 40.252253] usb 1-11: config 1 has an invalid interface number: 2 but max is 1 [ 40.252310] usb 1-11: config 1 has no interface number 1 [ 40.252367] usb 1-11: New USB device found, idVendor=0b05, idProduct=19af, bcdDevice= 1.00 [ 40.252422] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 40.253212] usb 1-11: Product: AURA LED Controller [ 40.253269] usb 1-11: Manufacturer: AsusTek Computer Inc. [ 40.253315] usb 1-11: SerialNumber: ... [ 40.253360] usb 1-4.4: new high-speed USB device number 7 using xhci_hcd [ 40.406990] usb 1-4.4: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 40.407285] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 40.407441] usb 1-4.4: Product: USB2.0 Hub [ 40.407587] usb 1-4.4: Manufacturer: VIA Labs, Inc. [ 40.407734] hub 1-4.4:1.0: USB hub found [ 40.407978] hub 1-4.4:1.0: 4 ports detected [ 40.408210] usb 2-4.4: new SuperSpeed USB device number 5 using xhci_hcd [ 40.707638] usb 2-4.4: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1 [ 40.707840] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 40.707985] usb 2-4.4: Product: USB3.0 Hub [ 40.708150] usb 2-4.4: Manufacturer: VIA Labs, Inc. [ 40.708298] hub 2-4.4:1.0: USB hub found [ 40.708475] hub 2-4.4:1.0: 4 ports detected [ 40.708632] usb 1-4.2.5: new high-speed USB device number 8 using xhci_hcd [ 40.708840] usb 1-4.2.5: New USB device found, idVendor=187c, idProduct=100e, bcdDevice= 1.01 [ 40.709012] usb 1-4.2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 40.709165] usb 1-4.2.5: Product: HID Device [ 40.709323] usb 1-4.2.5: Manufacturer: Realtek [ 40.709474] usb 1-14: new full-speed USB device number 9 using xhci_hcd [ 40.709679] usb 1-14: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00 [ 40.709837] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 40.709999] hid: raw HID events driver (C) Jiri Kosina [ 40.710023] usbcore: registered new interface driver usbhid [ 40.710035] usbhid: USB HID core driver [ 40.710047] hid-generic 0003:0B05:19AF.0001: hiddev0,hidraw0: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:00:14.0-11/input2 [ 40.710261] hid-generic 0003:187C:100E.0002: hiddev1,hidraw1: USB HID v1.11 Device [Realtek HID Device] on usb-0000:00:14.0-4.2.5/input0 [ 40.710453] usb 1-4.4.4: new high-speed USB device number 10 using xhci_hcd [ 41.103683] usb 1-4.4.4: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 41.103701] usb 1-4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 41.103711] usb 1-4.4.4: Product: USB2.0 Hub [ 41.103720] usb 1-4.4.4: Manufacturer: VIA Labs, Inc. [ 41.103729] hub 1-4.4.4:1.0: USB hub found [ 41.103749] hub 1-4.4.4:1.0: 4 ports detected [ 41.103767] usb 2-4.4.4: new SuperSpeed USB device number 6 using xhci_hcd [ 41.103785] BTRFS: device fsid HASH_56E-E54C-6EF7-8359-97975B7DDE87 devid 1 transid 66 /dev/mapper/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (254:0) scanned by mount (944) [ 41.103790] BTRFS info (device dm-0): first mount of filesystem HASH_56E-E54C-6EF7-8359-97975B7DDE87 [ 41.103794] BTRFS info (device dm-0): using crc32c (crc32c-x86) checksum algorithm [ 41.103798] BTRFS info (device dm-0): using free-space-tree [ 41.103802] usb 2-4.4.4: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1 [ 41.103810] usb 2-4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 41.103817] usb 2-4.4.4: Product: USB3.0 Hub [ 41.103824] usb 2-4.4.4: Manufacturer: VIA Labs, Inc. [ 41.103832] hub 2-4.4.4:1.0: USB hub found [ 41.103847] hub 2-4.4.4:1.0: 4 ports detected [ 41.103862] usb 1-XXX.XXX.XXX.XXX: new full-speed USB device number 11 using xhci_hcd [ 41.103889] usb 1-XXX.XXX.XXX.XXX: New USB device found, idVendor=046d, idProduct=c088, bcdDevice=15.02 [ 41.103897] usb 1-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 41.103904] usb 1-XXX.XXX.XXX.XXX: Product: G Pro Wireless Gaming Mouse [ 41.103911] usb 1-XXX.XXX.XXX.XXX: Manufacturer: Logitech [ 41.103918] usb 1-XXX.XXX.XXX.XXX: SerialNumber: ... [ 41.103925] input: Logitech G Pro Wireless Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.0/0003:046D:C088.0003/input/input3 [ 41.103928] hid-generic 0003:046D:C088.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G Pro Wireless Gaming Mouse] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input0 [ 41.103943] input: Logitech G Pro Wireless Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.1/0003:046D:C088.0004/input/input4 [ 41.103951] hid-generic 0003:046D:C088.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech G Pro Wireless Gaming Mouse] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input1 [ 41.103966] hid-generic 0003:046D:C088.0005: hiddev2,hidraw4: USB HID v1.11 Device [Logitech G Pro Wireless Gaming Mouse] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input2 [ 41.103980] usb 1-XXX.XXX.XXX.XXX: new high-speed USB device number 12 using xhci_hcd [ 41.103995] zram: Added device: zram0 [ 41.104009] usb 1-XXX.XXX.XXX.XXX: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 41.104019] usb 1-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 41.104027] usb 1-XXX.XXX.XXX.XXX: Product: USB2.0 Hub [ 41.104034] usb 1-XXX.XXX.XXX.XXX: Manufacturer: VIA Labs, Inc. [ 41.104041] hub 1-XXX.XXX.XXX.XXX:XXX.0: USB hub found [ 41.104056] hub 1-XXX.XXX.XXX.XXX:XXX.0: 4 ports detected [ 41.157494] Adding 9225416k swap on /dev/mapper/XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Priority:-2 extents:1 across:9225416k SS [ 41.157507] BTRFS info (device dm-0 state M): enabling auto defrag [ 41.157512] BTRFS info (device dm-0 state M): use zstd compression, level 1 [ 41.157554] fuse: init (API version 7.42) [ 41.157618] usb 2-XXX.XXX.XXX.XXX: new SuperSpeed USB device number 7 using xhci_hcd [ 41.206007] zram0: detected capacity change from 0 to 16777216 [ 41.207005] intel_pmc_core INT33A1:00: initialized [ 41.220014] input: Logitech G Pro Wireless Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.0/0003:046D:C088.0003/input/input5 [ 41.220031] logitech-hidpp-device 0003:046D:C088.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G Pro Wireless Gaming Mouse] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input0 [ 41.224006] thermal LNXTHERM:00: registered as thermal_zone0 [ 41.224083] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 41.235003] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDsc [ 41.248009] mc: Linux media interface: v0.10 [ 41.263009] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 41.263102] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 41.263167] snd_hda_intel 0000:01:00.1: Disabling MSI [ 41.263221] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 41.269005] MACsec IEEE 802.1AE [ 41.274006] input: Logitech G Pro Wireless Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX:XXX.1/0003:046D:C088.0004/input/input6 [ 41.278006] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau]) [ 41.282006] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 41.299381] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 41.299444] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 41.299488] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 41.299528] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 41.299575] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 41.299618] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 41.299669] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 41.299708] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7 [ 41.299712] Bluetooth: Core ver 2.22 [ 41.299715] NET: Registered PF_BLUETOOTH protocol family [ 41.299719] Bluetooth: HCI device and connection manager initialized [ 41.299723] Bluetooth: HCI socket layer initialized [ 41.299726] Bluetooth: L2CAP socket layer initialized [ 41.299729] Bluetooth: SCO socket layer initialized [ 41.299733] i2c i2c-4: Failed to register i2c client ITE8853:00 at 0x4e (-16) [ 41.299782] usbcore: registered new interface driver btusb [ 41.299786] Intel(R) 2.5G Ethernet Linux Driver [ 41.299789] Copyright(c) 2018 Intel Corporation. [ 41.299793] igc 0000:06:00.0: enabling device (0000 -> 0002) [ 41.363765] igc 0000:06:00.0: PTM enabled, 4ns granularity [ 41.364217] Bluetooth: hci0: Firmware timestamp 2024.48 buildtype 1 build 81864 [ 41.364258] Bluetooth: hci0: Firmware SHA1: 0xc115e35a [ 41.364289] Bluetooth: hci0: No dsm support to set reset delay [ 41.364320] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 41.364351] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 41.364389] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 41.364417] ACPI: bus type thunderbolt registered [ 41.364445] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11 [ 41.364473] Intel(R) Wireless WiFi driver for Linux [ 41.364502] iwlwifi 0000:05:00.0: enabling device (0000 -> 0002) [ 41.364899] iwlwifi 0000:05:00.0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000 [ 41.365298] iwlwifi 0000:05:00.0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000 [ 41.365689] iwlwifi 0000:05:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz [ 41.366079] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 41.366457] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 41.366915] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 41.367459] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 41.367815] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 41.368160] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 41.368526] atlantic: Detect ATL2FW 1030018 [ 41.368547] Serial bus multi instantiate pseudo device driver INT3515:00: error -ENXIO: IRQ index 1 not found [ 41.368773] Serial bus multi instantiate pseudo device driver INT3515:00: error -ENXIO: Error requesting irq at index 1 [ 41.368976] Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi [ 41.368993] Bluetooth: hci0: Boot Address: 0x100800 [ 41.369018] Bluetooth: hci0: Firmware Version: 200-48.24 [ 41.369034] Bluetooth: hci0: Firmware already loaded [ 41.369052] i2c i2c-5: Successfully instantiated SPD at 0x51 [ 41.369263] i2c i2c-5: Successfully instantiated SPD at 0x53 [ 41.369447] Bluetooth: hci0: Fseq status: Success (0x00) [ 41.369463] Bluetooth: hci0: Fseq executed: XXX.XXX.XXX.XXX [ 41.369480] Bluetooth: hci0: Fseq BT Top: XXX.XXX.XXX.XXX [ 41.369498] asus_wmi: ASUS WMI generic driver loaded [ 41.369513] asus_wmi: SFUN value: 0x1 [ 41.369529] eeepc-wmi eeepc-wmi: Detected ATK, not ASUSWMI, use DSTS [ 41.369725] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input18 [ 41.369745] asus_wmi: SFUN value: 0x1 [ 41.369765] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS [ 41.369925] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input19 [ 41.369937] logitech-hidpp-device 0003:046D:C088.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech G Pro Wireless Gaming Mouse] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input1 [ 41.370137] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8 [ 41.370154] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9 [ 41.370165] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12 [ 41.370184] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 41.370196] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10 [ 41.370212] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 41.370224] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 41.370239] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 41.370251] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 41.370265] iwlwifi 0000:05:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 41.370455] iwlwifi 0000:05:00.0: loaded firmware version 89.4d42c933.0 ty-a0-gf-a0-89.ucode op_mode iwlmvm [ 41.370634] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer [ 41.370646] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 41.370657] RAPL PMU: hw unit of domain package 2^-14 Joules [ 41.370668] igc 0000:06:00.0 (unnamed net_device) (uninitialized): PHC added [ 41.370839] igc 0000:06:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link) [ 41.371033] igc 0000:06:00.0 eth1: MAC: 673489BD96B538E428503BCEAFC40208 [ 41.389009] logitech-hidpp-device 0003:046D:C088.0005: hiddev2,hidraw4: USB HID v1.11 Device [Logitech G Pro Wireless Gaming Mouse] on usb-0000:00:14.0-XXX.XXX.XXX.XXX/input2 [ 41.412370] logitech-hidpp-device 0003:046D:C088.0005: HID++ 4.2 device connected. [ 41.412489] intel_tcc_cooling: Programmable TCC Offset detected [ 41.412498] usb 2-XXX.XXX.XXX.XXX: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1 [ 41.412591] usb 2-XXX.XXX.XXX.XXX: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 41.412663] usb 2-XXX.XXX.XXX.XXX: Product: USB3.0 Hub [ 41.412733] usb 2-XXX.XXX.XXX.XXX: Manufacturer: VIA Labs, Inc. [ 41.412805] hub 2-XXX.XXX.XXX.XXX:XXX.0: USB hub found [ 41.412906] hub 2-XXX.XXX.XXX.XXX:XXX.0: 4 ports detected [ 41.412996] iTCO_vendor_support: vendor-support=0 [ 41.414009] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400) [ 41.414156] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 41.415012] spi-nor spi0.0: supply vcc not found, using dummy regulator [ 41.417523] spd5118 5-0051: DDR5 temperature sensor: vendor 0x00:0xb3 revision 2.2 [ 41.417573] Creating 1 MTD partitions on "0000:00:1f.5": [ 41.417579] 0x000000000000-0x000002000000 : "BIOS" [ 41.420017] spd5118 5-0053: DDR5 temperature sensor: vendor 0x00:0xb3 revision 2.2 [ 41.471031] intel_rapl_msr: PL4 support detected. [ 41.471050] intel_rapl_common: Found RAPL domain package [ 41.471058] intel_rapl_common: Found RAPL domain core [ 41.476006] usb 1-XXX.XXX.XXX.XXX.4: new full-speed USB device number 13 using xhci_hcd [ 41.513026] usb 1-3: Focusrite Scarlett Gen 3 Mixer Driver enabled (pid=0x8210); report any issues to https://github.com/geoffreybennett/scarlett-gen2/issues [ 41.535553] usb 1-3: Firmware version 1605 [ 41.535859] usbcore: registered new interface driver snd-usb-audio [ 41.555061] iwlwifi 0000:05:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 41.555442] iwlwifi 0000:05:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 41.555687] iwlwifi 0000:05:00.0: WFPM_AUTH_KEY_0: 0x90 [ 41.555916] iwlwifi 0000:05:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 41.556151] iwlwifi 0000:05:00.0: Detected RF GF, rfid=0x10d000 [ 41.559022] iwlwifi 0000:05:00.0: loaded PNVM version 581d4936 [ 41.566014] usb 1-XXX.XXX.XXX.XXX.4: New USB device found, idVendor=05ac, idProduct=024f, bcdDevice= 1.07 [ 41.573161] usb 1-XXX.XXX.XXX.XXX.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 41.573361] usb 1-XXX.XXX.XXX.XXX.4: Product: Keychron K4 [ 41.573550] usb 1-XXX.XXX.XXX.XXX.4: Manufacturer: Keychron K4 [ 41.588036] usbcore: registered new device driver apple-mfi-fastcharge [ 41.592017] apple 0003:05AC:024F.0006: Non-apple keyboard detected; function keys will default to fnmode=2 behavior [ 41.657150] input: Keychron K4 Keychron K4 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX.4/1-XXX.XXX.XXX.XXX.4:1.0/0003:05AC:024F.0006/input/input20 [ 41.657159] iwlwifi 0000:05:00.0: base HW address: 45BE7175C37E8A906B82494EC64002F0 [ 41.657269] apple 0003:05AC:024F.0006: input,hidraw5: USB HID v1.11 Keyboard [Keychron K4 Keychron K4] on usb-0000:00:14.0-XXX.XXX.XXX.XXX.4/input0 [ 41.657379] apple 0003:05AC:024F.0007: Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling [ 41.657466] apple 0003:05AC:024F.0007: Non-apple keyboard detected; function keys will default to fnmode=2 behavior [ 41.657549] input: Keychron K4 Keychron K4 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4.4/1-XXX.XXX.XXX.XXX/1-XXX.XXX.XXX.XXX.4/1-XXX.XXX.XXX.XXX.4:1.1/0003:05AC:024F.0007/input/input21 [ 41.657555] apple 0003:05AC:024F.0007: input,hiddev3,hidraw6: USB HID v1.11 Keyboard [Keychron K4 Keychron K4] on usb-0000:00:14.0-XXX.XXX.XXX.XXX.4/input1 [ 41.660007] atlantic 0000:04:00.0 eno1: renamed from eth0 [ 41.660104] igc 0000:06:00.0 eno2: renamed from eth1 [ 41.674016] iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0 [ 42.184803] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 42.282003] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 42.282013] Bluetooth: BNEP filters: protocol multicast [ 42.282018] Bluetooth: BNEP socket layer initialized [ 42.282021] Bluetooth: MGMT ver 1.23 [ 42.330003] nvme nvme0: using unchecked data buffer [ 42.520135] iwlwifi 0000:05:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 42.520282] iwlwifi 0000:05:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 42.520342] iwlwifi 0000:05:00.0: WFPM_AUTH_KEY_0: 0x90 [ 42.520396] iwlwifi 0000:05:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 42.612006] iwlwifi 0000:05:00.0: Registered PHC clock: iwlwifi-PTP, with index: 1 [ 42.808134] iwlwifi 0000:05:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 42.808261] iwlwifi 0000:05:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 42.808322] iwlwifi 0000:05:00.0: WFPM_AUTH_KEY_0: 0x90 [ 42.808376] iwlwifi 0000:05:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0 [ 42.937006] NET: Registered PF_PACKET protocol family [ 43.317175] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 43.317344] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 43.317413] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 43.317464] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 48.243024] Bluetooth: RFCOMM TTY layer initialized [ 48.243117] Bluetooth: RFCOMM socket layer initialized [ 48.243171] Bluetooth: RFCOMM ver 1.11 [ 49.231016] block nvme0n1: No UUID available providing old NGUID [ 50.055005] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 50.449008] htmlscript[1914]: segfault at 18 ip 00007f6b0b0b2ce1 sp 00007ffd5992ec20 error 4 in libgallium-25.0.7.so[22b1ce1,7f6b09d77000+1de3000] likely on CPU 10 (core 20, socket 0) [ 50.449041] Code: 00 00 49 89 d7 49 89 f6 48 89 fb bf 01 00 00 00 be 98 01 00 00 e8 2f 3f aa 00 48 85 c0 74 71 49 8b 4f 10 48 89 88 80 00 00 00 <0f> b6 51 18 80 e2 03 88 90 8d 00 00 00 48 8b 51 20 48 89 50 70 41 [ 50.537014] atlantic 0000:04:00.0 eno1: atlantic: link change old 0 new 10000 [ 64.600012] htmlscript[2190]: segfault at 18 ip 00007fdaf30b2ce1 sp 00007ffe71aa4970 error 4 in libgallium-25.0.7.so[22b1ce1,7fdaf1d77000+1de3000] likely on CPU 11 (core 20, socket 0) [ 64.600103] Code: 00 00 49 89 d7 49 89 f6 48 89 fb bf 01 00 00 00 be 98 01 00 00 e8 2f 3f aa 00 48 85 c0 74 71 49 8b 4f 10 48 89 88 80 00 00 00 <0f> b6 51 18 80 e2 03 88 90 8d 00 00 00 48 8b 51 20 48 89 50 70 41 [ 69.250611] TCP: eno1: Driver has suspect GRO implementation, TCP performance may be compromised. [ 301.611008] htmlscript[3046]: segfault at 18 ip 00007f3c070b2ce1 sp 00007ffe9539d170 error 4 in libgallium-25.0.7.so[22b1ce1,7f3c05d77000+1de3000] likely on CPU 10 (core 20, socket 0) [ 301.611062] Code: 00 00 49 89 d7 49 89 f6 48 89 fb bf 01 00 00 00 be 98 01 00 00 e8 2f 3f aa 00 48 85 c0 74 71 49 8b 4f 10 48 89 88 80 00 00 00 <0f> b6 51 18 80 e2 03 88 90 8d 00 00 00 48 8b 51 20 48 89 50 70 41 [ 313.171009] htmlscript[8836]: segfault at 18 ip 00007fbf170b2ce1 sp 00007fff06796090 error 4 in libgallium-25.0.7.so[22b1ce1,7fbf15d77000+1de3000] likely on CPU 2 (core 4, socket 0) [ 313.171063] Code: 00 00 49 89 d7 49 89 f6 48 89 fb bf 01 00 00 00 be 98 01 00 00 e8 2f 3f aa 00 48 85 c0 74 71 49 8b 4f 10 48 89 88 80 00 00 00 <0f> b6 51 18 80 e2 03 88 90 8d 00 00 00 48 8b 51 20 48 89 50 70 41 [ 397.007010] htmlscript[22394]: segfault at 18 ip 00007fcf870b2ce1 sp 00007ffcd082b0f0 error 4 in libgallium-25.0.7.so[22b1ce1,7fcf85d77000+1de3000] likely on CPU 10 (core 20, socket 0) [ 397.007081] Code: 00 00 49 89 d7 49 89 f6 48 89 fb bf 01 00 00 00 be 98 01 00 00 e8 2f 3f aa 00 48 85 c0 74 71 49 8b 4f 10 48 89 88 80 00 00 00 <0f> b6 51 18 80 e2 03 88 90 8d 00 00 00 48 8b 51 20 48 89 50 70 41 [ 435.850010] Non-volatile memory driver v1.3 [ 437.491021] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 437.523042] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 437.523808] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 437.524097] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 437.524339] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 438.753105] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 438.753296] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 438.753383] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 438.753458] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 440.770125] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 440.770700] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 440.771044] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 440.771309] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 442.113166] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 442.113491] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 442.113596] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 442.113690] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 444.121275] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 444.122350] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 444.122946] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 444.123267] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 887.810169] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 887.811129] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 887.811746] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 887.812275] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 888.284039] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 888.284735] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 888.285311] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 888.285820] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 888.504036] BTRFS: device label ... devid 1 transid 127 /dev/sdc1 (8:33) scanned by mount (29801) [ 888.505029] BTRFS info (device sdc1): first mount of filesystem HASH_44A-8E12-68D0-56AC-10799482A51D [ 888.505170] BTRFS info (device sdc1): using crc32c (crc32c-x86) checksum algorithm [ 888.505216] BTRFS info (device sdc1): using free-space-tree [ 888.542085] BTRFS info (device sdc1): last unmount of filesystem HASH_44A-8E12-68D0-56AC-10799482A51D [ 888.553090] BTRFS: device label ... devid 1 transid 127 /dev/sdc1 (8:33) scanned by mount (29832) [ 888.554030] BTRFS info (device sdc1): first mount of filesystem HASH_44A-8E12-68D0-56AC-10799482A51D [ 888.554156] BTRFS info (device sdc1): using crc32c (crc32c-x86) checksum algorithm [ 888.554215] BTRFS info (device sdc1): using free-space-tree [ 888.587038] BTRFS info (device sdc1): last unmount of filesystem HASH_44A-8E12-68D0-56AC-10799482A51D [ 890.291034] pcieport 10000:e0:1b.4: AER: Correctable error message received from 10000:e2:00.0 [ 890.291529] nvme 10000:e2:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) [ 890.291694] nvme 10000:e2:00.0: device [15b7:5030] error status/mask=00000001/0000e000 [ 890.291824] nvme 10000:e2:00.0: [ 0] RxErr (First) [ 909.450146] iwlwifi 0000:05:00.0: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 909.450974] iwlwifi 0000:05:00.0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 909.451742] iwlwifi 0000:05:00.0: WFPM_AUTH_KEY_0: 0x90 [ 909.452060] iwlwifi 0000:05:00.0: CNVI_SCU_SEQ_DATA_DW9: 0x0