[ 0.981776] Linux version 6.14.2-desktop-3omv2590 (XXX@XXX) (OpenMandriva 19.1.7-1 clang version 19.1.7 (/builddir/build/BUILD/llvm-19.1.7-build/llvm-project-llvmorg-19.1.7/clang f6577d7ceed75def4c4c7db30fa2d30a053fc852), OpenMandriva 19.1.7-1 LLD 19.1.7 (/builddir/build/BUILD/llvm-19.1.7-build/llvm-project-llvmorg-19.1.7/llvm f6577d7ceed75def4c4c7db30fa2d30a053fc852)) #1 SMP PREEMPT_DYNAMIC Fri Apr 18 21:01:44 UTC 2025 [ 0.981806] KERNEL supported cpus: [ 0.981810] Intel GenuineIntel [ 0.981814] AMD AuthenticAMD [ 0.981820] Hygon HygonGenuine [ 0.981825] Centaur CentaurHauls [ 0.981829] zhaoxin Shanghai [ 0.981833] BIOS-provided physical RAM map: [ 0.981837] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.981841] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.981845] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.981849] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.981853] BIOS-e820: [mem 0x0000000000100000-0x00000000ceaf5fff] usable [ 0.981859] BIOS-e820: [mem 0x00000000ceaf6000-0x00000000ceafcfff] ACPI NVS [ 0.981863] BIOS-e820: [mem 0x00000000ceafd000-0x00000000cf384fff] usable [ 0.981867] BIOS-e820: [mem 0x00000000cf385000-0x00000000cf61efff] reserved [ 0.981871] BIOS-e820: [mem 0x00000000cf61f000-0x00000000de754fff] usable [ 0.981875] BIOS-e820: [mem 0x00000000de755000-0x00000000deb5afff] reserved [ 0.981879] BIOS-e820: [mem 0x00000000deb5b000-0x00000000deb6afff] ACPI data [ 0.981882] BIOS-e820: [mem 0x00000000deb6b000-0x00000000decebfff] ACPI NVS [ 0.981886] BIOS-e820: [mem 0x00000000decec000-0x00000000deffefff] reserved [ 0.981890] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable [ 0.981894] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.981898] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.981902] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.981905] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.981909] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.981913] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.981917] BIOS-e820: [mem 0x0000000100000000-0x000000061effffff] usable [ 0.981922] NX (Execute Disable) protection: active [ 0.981926] APIC: Static calls initialized [ 0.981930] e820: update [mem 0xcd7e1018-0xcd80aa57] usable ==> usable [ 0.981934] extended physical RAM map: [ 0.981938] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.981943] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.981946] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.981950] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.981954] reserve setup_data: [mem 0x0000000000100000-0x00000000cd7e1017] usable [ 0.981959] reserve setup_data: [mem 0x00000000cd7e1018-0x00000000cd80aa57] usable [ 0.981967] reserve setup_data: [mem 0x00000000cd80aa58-0x00000000ceaf5fff] usable [ 0.981971] reserve setup_data: [mem 0x00000000ceaf6000-0x00000000ceafcfff] ACPI NVS [ 0.981975] reserve setup_data: [mem 0x00000000ceafd000-0x00000000cf384fff] usable [ 0.981979] reserve setup_data: [mem 0x00000000cf385000-0x00000000cf61efff] reserved [ 0.981982] reserve setup_data: [mem 0x00000000cf61f000-0x00000000de754fff] usable [ 0.981986] reserve setup_data: [mem 0x00000000de755000-0x00000000deb5afff] reserved [ 0.981993] reserve setup_data: [mem 0x00000000deb5b000-0x00000000deb6afff] ACPI data [ 0.982004] reserve setup_data: [mem 0x00000000deb6b000-0x00000000decebfff] ACPI NVS [ 0.982011] reserve setup_data: [mem 0x00000000decec000-0x00000000deffefff] reserved [ 0.982027] reserve setup_data: [mem 0x00000000defff000-0x00000000deffffff] usable [ 0.982033] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.982039] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.982046] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.982053] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.982059] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.982066] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.982082] reserve setup_data: [mem 0x0000000100000000-0x000000061effffff] usable [ 0.982090] efi: EFI v2.3.1 by American Megatrends [ 0.982098] efi: ESRT=0xdef7b998 ACPI 2.0=0xdecaf000 ACPI=0xdecaf000 SMBIOS=0xdef7b518 INITRD=0xcf635918 [ 0.982105] efi: Remove mem56: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map [ 0.982113] e820: remove [mem 0xf8000000-0xfbffffff] reserved [ 0.982120] efi: Not removing mem57: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.982129] efi: Not removing mem58: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map [ 0.982136] efi: Not removing mem59: MMIO range=[0xfed1c000-0xfed1ffff] (16KB) from e820 map [ 0.982144] efi: Not removing mem60: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.982151] efi: Remove mem61: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.982158] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.982164] SMBIOS 2.8 present. [ 0.982172] DMI: Notebook P770ZM /P770ZM , BIOS 1.03.06 12/22/2014 [ 0.982179] DMI: Memory slots populated: 4/4 [ 0.982186] tsc: Fast TSC calibration using PIT [ 0.982193] tsc: Detected 3991.101 MHz processor [ 0.982201] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.982210] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.982218] last_pfn = 0x61f000 max_arch_pfn = 0x400000000 [ 0.982227] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs [ 0.982237] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.982245] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.982254] last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.982263] esrt: Reserving ESRT space from 0x00000000def7b998 to 0x00000000def7b9d0. [ 0.982271] Using GB pages for direct mapping [ 0.982279] Secure boot disabled [ 0.982287] RAMDISK: [mem 0xbdb75000-0xc74dbfff] ACPI: Early table checksum verification disabled [ 0.982304] ACPI: RSDP 0x00000000DECAF000 000024 (v02 ALASKA) [ 0.982314] ACPI: XSDT 0x00000000DECAF090 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.982323] ACPI: FACP 0x00000000DECC0930 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.982331] ACPI: DSDT 0x00000000DECAF1C0 01176F (v02 ALASKA A M I 00000015 INTL 20120711) [ 0.982339] ACPI: FACS 0x00000000DECEBF80 000040 [ 0.982348] ACPI: APIC 0x00000000DECC0A40 000092 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.982356] ACPI: FPDT 0x00000000DECC0AD8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.982365] ACPI: FIDT 0x00000000DECC0B20 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.982374] ACPI: ASF! 0x00000000DECC0BC0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.982384] ACPI: SSDT 0x00000000DECC0C68 00342F (v02 TrmRef PtidDevc 00001000 INTL 20120711) [ 0.982392] ACPI: SSDT 0x00000000DECC4098 001824 (v01 NvdRef NvdTabl 00001000 INTL 20120711) [ 0.982401] ACPI: SSDT 0x00000000DECC58C0 000539 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.982409] ACPI: SSDT 0x00000000DECC5E00 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20051117) [ 0.982417] ACPI: MCFG 0x00000000DECC6978 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.982426] ACPI: HPET 0x00000000DECC69B8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.982435] ACPI: SSDT 0x00000000DECC69F0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.982443] ACPI: SSDT 0x00000000DECC6D60 005B5D (v02 SaSsdt SaSsdt 00003000 INTL 20120711) [ 0.982451] ACPI: DMAR 0x00000000DECCC8C0 000080 (v01 INTEL BDW 00000001 INTL 00000001) [ 0.982461] ACPI: BGRT 0x00000000DECCC940 000038 (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.982470] ACPI: Reserving FACP table memory at [mem 0xdecc0930-0xdecc0a3b] ACPI: Reserving DSDT table memory at [mem 0xdecaf1c0-0xdecc092e] ACPI: Reserving FACS table memory at [mem 0xdecebf80-0xdecebfbf] ACPI: Reserving APIC table memory at [mem 0xdecc0a40-0xdecc0ad1] ACPI: Reserving FPDT table memory at [mem 0xdecc0ad8-0xdecc0b1b] ACPI: Reserving FIDT table memory at [mem 0xdecc0b20-0xdecc0bbb] ACPI: Reserving ASF! table memory at [mem 0xdecc0bc0-0xdecc0c64] ACPI: Reserving SSDT table memory at [mem 0xdecc0c68-0xdecc4096] ACPI: Reserving SSDT table memory at [mem 0xdecc4098-0xdecc58bb] ACPI: Reserving SSDT table memory at [mem 0xdecc58c0-0xdecc5df8] ACPI: Reserving SSDT table memory at [mem 0xdecc5e00-0xdecc6973] ACPI: Reserving MCFG table memory at [mem 0xdecc6978-0xdecc69b3] ACPI: Reserving HPET table memory at [mem 0xdecc69b8-0xdecc69ef] ACPI: Reserving SSDT table memory at [mem 0xdecc69f0-0xdecc6d5c] ACPI: Reserving SSDT table memory at [mem 0xdecc6d60-0xdeccc8bc] ACPI: Reserving DMAR table memory at [mem 0xdeccc8c0-0xdeccc93f] ACPI: Reserving BGRT table memory at [mem 0xdeccc940-0xdeccc977] No NUMA configuration found [ 0.982623] Faking a node at [mem 0x0000000000000000-0x000000061effffff] NODE_DATA(0) allocated [mem 0x61efdda40-0x61effffff] Zone ranges: [ 0.982652] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000061effffff] Movable zone start for each node [ 0.982687] Early memory node ranges [ 0.982696] node 0: [mem 0x0000000000001000-0x0000000000057fff] node 0: [mem 0x0000000000059000-0x000000000009dfff] node 0: [mem 0x0000000000100000-0x00000000ceaf5fff] node 0: [mem 0x00000000ceafd000-0x00000000cf384fff] node 0: [mem 0x00000000cf61f000-0x00000000de754fff] node 0: [mem 0x00000000defff000-0x00000000deffffff] node 0: [mem 0x0000000100000000-0x000000061effffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000061effffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.982773] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.982781] On node 0, zone DMA: 98 pages in unavailable ranges [ 0.982792] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.982800] On node 0, zone DMA32: 666 pages in unavailable ranges [ 0.982808] On node 0, zone DMA32: 2218 pages in unavailable ranges [ 0.982816] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.982824] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.982833] ACPI: PM-Timer IO Port: 0x1808 [ 0.982841] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.982849] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.982858] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.982868] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.982877] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.982885] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.982894] e820: update [mem 0xdc061000-0xdc142fff] usable ==> reserved [ 0.982902] TSC deadline timer available [ 0.982911] CPU topo: Max. logical packages: 1 [ 0.982919] CPU topo: Max. logical dies: 1 [ 0.982926] CPU topo: Max. dies per package: 1 [ 0.982934] CPU topo: Max. threads per core: 2 [ 0.982944] CPU topo: Num. cores per package: 4 [ 0.982952] CPU topo: Num. threads per package: 8 [ 0.982960] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.982967] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xcd7e1000-0xcd7e1fff] PM: hibernation: Registered nosave memory: [mem 0xcd80a000-0xcd80afff] PM: hibernation: Registered nosave memory: [mem 0xceaf6000-0xceafcfff] PM: hibernation: Registered nosave memory: [mem 0xcf385000-0xcf61efff] PM: hibernation: Registered nosave memory: [mem 0xdc061000-0xdc142fff] PM: hibernation: Registered nosave memory: [mem 0xde755000-0xdeb5afff] PM: hibernation: Registered nosave memory: [mem 0xdeb5b000-0xdeb6afff] PM: hibernation: Registered nosave memory: [mem 0xdeb6b000-0xdecebfff] PM: hibernation: Registered nosave memory: [mem 0xdecec000-0xdeffefff] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [mem 0xdf000000-0xfebfffff] available for PCI devices [ 0.983177] Booting paravirtualized kernel on bare hardware [ 0.983185] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.983193] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.983203] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 [ 0.983211] pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 [ 0.983218] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.983236] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.14.2-desktop-3omv2590 audit=0", will be passed to user space. [ 0.983244] random: crng init done [ 0.983252] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes [ 0.983260] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.983268] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.983277] Fallback order for Node 0: 0 [ 0.983285] Built 1 zonelists, mobility grouping on. Total pages: 6280273 [ 0.983293] Policy zone: Normal [ 0.983302] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.983309] software IO TLB: area num 8. [ 0.983317] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.983325] Kernel/User page tables isolation: enabled [ 0.983333] Dynamic Preempt: lazy [ 0.983341] rcu: Preemptible hierarchical RCU implementation. [ 0.983351] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.983359] Trampoline variant of Tasks RCU enabled. [ 0.983368] Tracing variant of Tasks RCU enabled. [ 0.983375] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.983383] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.983391] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.983399] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.983407] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.983415] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.983425] Console: colour dummy device 80x30 [ 0.983433] printk: legacy console [tty0] enabled [ 0.983440] ACPI: Core revision 20240827 [ 0.983448] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.983457] APIC: Switch to symmetric I/O mode setup [ 0.983465] DMAR: Host address width 39 [ 0.983473] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.983480] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da [ 0.983488] DMAR: RMRR base: 0x000000deea0000 end: 0x000000deeaefff [ 0.983498] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0 [ 0.983506] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.983514] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.983522] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.983529] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.983538] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.983546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.983554] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x730f0bcce1f, max_idle_ns: 881590472185 ns [ 0.983564] Calibrating delay loop (skipped), value calculated using timer frequency.. 7982.20 BogoMIPS (lpj=3991101) [ 0.983572] CPU0: Thermal monitoring enabled (TM1) [ 0.983580] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.983587] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.983595] process: using mwait in idle threads [ 0.983603] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.983611] Spectre V2 : Mitigation: Retpolines [ 0.983619] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.983628] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.983637] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.983645] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.983653] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.983661] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.983669] MDS: Mitigation: Clear CPU buffers [ 0.983677] MMIO Stale Data: Unknown: No mitigations [ 0.983685] SRBDS: Mitigation: Microcode [ 0.983693] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.983701] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.983710] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.983718] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.983726] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.983734] Freeing SMP alternatives memory: 40K [ 0.983742] pid_max: default: 32768 minimum: 301 [ 0.983750] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.983758] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.983767] smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.983776] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.983784] ... version: 3 [ 0.983792] ... bit width: 48 [ 0.983799] ... generic registers: 4 [ 0.983807] ... value mask: 0000ffffffffffff [ 0.983815] ... max period: 00007fffffffffff [ 0.983822] ... fixed-purpose events: 3 [ 0.983830] ... event mask: 000000070000000f [ 0.983838] signal: max sigframe size: 1776 [ 0.983846] Estimated ratio of average max frequency by base frequency (times 1024): 1075 [ 0.983855] rcu: Hierarchical SRCU implementation. [ 0.983863] rcu: Max phase no-delay instances is 400. [ 0.983871] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.983879] smp: Bringing up secondary CPUs ... [ 0.983887] smpboot: x86: Booting SMP configuration: [ 0.983895] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.983903] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.983911] smp: Brought up 1 node, 8 CPUs [ 0.983919] smpboot: Total of 8 processors activated (63857.61 BogoMIPS) [ 0.983928] Memory: 24404836K/25121092K available (13111K kernel code, 1439K rwdata, 9300K rodata, 2952K init, 4156K bss, 706352K reserved, 0K cma-reserved) [ 0.983936] devtmpfs: initialized [ 0.983944] x86/mm: Memory block size: 128MB [ 0.983952] ACPI: PM: Registering ACPI NVS region [mem 0xceaf6000-0xceafcfff] (28672 bytes) [ 0.983960] ACPI: PM: Registering ACPI NVS region [mem 0xdeb6b000-0xdecebfff] (1576960 bytes) [ 0.983968] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.983975] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.983982] pinctrl core: initialized pinctrl subsystem [ 0.983990] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.983998] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.984033] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.984043] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.984051] thermal_sys: Registered thermal governor 'fair_share' [ 0.984059] thermal_sys: Registered thermal governor 'bang_bang' [ 0.984067] thermal_sys: Registered thermal governor 'step_wise' [ 0.984075] thermal_sys: Registered thermal governor 'user_space' [ 0.984083] thermal_sys: Registered thermal governor 'power_allocator' [ 0.984091] cpuidle: using governor ladder [ 0.984103] cpuidle: using governor menu [ 0.984114] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.984122] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.984131] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] PCI: not using ECAM ([mem 0xf8000000-0xfbffffff] not reserved) [ 0.984147] PCI: Using configuration type 1 for base access [ 0.984155] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.984163] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.984172] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.984180] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.984189] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.984196] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.984214] ACPI: Added _OSI(Module Device) [ 0.984222] ACPI: Added _OSI(Processor Device) [ 0.984230] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.984238] ACPI: Added _OSI(Processor Aggregator Device) [ 0.984246] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.984254] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.984262] ACPI: Dynamic OEM Table Load: [ 0.984270] ACPI: SSDT 0xFFFF8A56413E6000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.984279] ACPI: Dynamic OEM Table Load: [ 0.984287] ACPI: SSDT 0xFFFF8A5640DBD800 0005AA (v02 PmRef ApIst 00003000 INTL 20051117) [ 0.984295] ACPI: Dynamic OEM Table Load: [ 0.984303] ACPI: SSDT 0xFFFF8A564088FC00 000119 (v02 PmRef ApCst 00003000 INTL 20051117) [ 0.984310] ACPI: EC: EC started [ 0.984318] ACPI: EC: interrupt blocked [ 0.984326] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.984334] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions [ 0.984342] ACPI: Interpreter enabled [ 0.984352] ACPI: PM: (supports S0 S3 S4 S5) [ 0.984360] ACPI: Using IOAPIC for interrupt routing [ 0.984367] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource [ 0.984384] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.984391] PCI: Using E820 reservations for host bridge windows [ 0.984399] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.984408] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource [ 0.984416] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource [ 0.984425] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource [ 0.984433] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.984610] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.984893] PCI host bridge to bus 0000:00 [ 0.985032] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000effff window] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window] pci_bus 0000:00: root bus resource [bus 00-3e] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 conventional PCI endpoint [ 0.985736] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 PCIe Root Port [ 0.985854] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.986517] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330 conventional PCI endpoint [ 0.986634] pci 0000:00:14.0: BAR 0 [mem 0xf7400000-0xf740ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.986890] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000 conventional PCI endpoint [ 0.987024] pci 0000:00:16.0: BAR 0 [mem 0xf7419000-0xf741900f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.987290] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320 conventional PCI endpoint [ 0.987409] pci 0000:00:1a.0: BAR 0 [mem 0xf7417000-0xf74173ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.987639] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 0.987809] pci 0000:00:1b.0: BAR 0 [mem 0xf7410000-0xf7413fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.988098] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400 PCIe Root Port [ 0.988235] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.988499] pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400 PCIe Root Port [ 0.988598] pci 0000:00:1c.2: PCI bridge to [bus 03] pci 0000:00:1c.2: bridge window [mem 0xf7300000-0xf73fffff] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.988868] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400 PCIe Root Port [ 0.988953] pci 0000:00:1c.3: PCI bridge to [bus 04-07] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf72fffff] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.989465] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320 conventional PCI endpoint [ 0.989549] pci 0000:00:1d.0: BAR 0 [mem 0xf7416000-0xf74163ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.989720] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100 conventional PCI endpoint [ 0.989814] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601 conventional PCI endpoint [ 0.989900] pci 0000:00:1f.2: BAR 0 [io 0xf070-0xf077] pci 0000:00:1f.2: BAR 1 [io 0xf060-0xf063] pci 0000:00:1f.2: BAR 2 [io 0xf050-0xf057] pci 0000:00:1f.2: BAR 3 [io 0xf040-0xf043] pci 0000:00:1f.2: BAR 4 [io 0xf020-0xf03f] pci 0000:00:1f.2: BAR 5 [mem 0xf7415000-0xf74157ff] pci 0000:00:1f.2: PME# supported from D3hot [ 0.990500] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500 conventional PCI endpoint [ 0.990583] pci 0000:00:1f.3: BAR 0 [mem 0xf7414000-0xf74140ff 64bit] pci 0000:00:1f.3: BAR 4 [io 0xf000-0xf01f] pci 0000:01:00.0: [10de:11b6] type 00 class 0x030000 PCIe Endpoint [ 0.990845] pci 0000:01:00.0: BAR 0 [mem 0xf6000000-0xf6ffffff] pci 0000:01:00.0: BAR 1 [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: BAR 3 [mem 0xf0000000-0xf1ffffff 64bit pref] pci 0000:01:00.0: BAR 5 [io 0xe000-0xe07f] pci 0000:01:00.0: ROM [mem 0xf7000000-0xf707ffff pref] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 0.991474] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 PCIe Endpoint [ 0.991563] pci 0000:01:00.1: BAR 0 [mem 0xf7080000-0xf7083fff] pci 0000:00:01.0: ASPM: current common clock configuration is inconsistent, reconfiguring [ 0.991736] pci 0000:00:01.0: PCI bridge to [bus 01] acpiphp: Slot [1] registered [ 0.991829] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:03:00.0: [10ec:5250] type 00 class 0x080501 PCIe Endpoint [ 0.992027] pci 0000:03:00.0: BAR 0 [mem 0xf7301000-0xf7301fff] pci 0000:03:00.0: BAR 1 [mem 0xf7300000-0xf7300fff] pci 0000:03:00.0: supports D1 D2 [ 0.992280] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.992364] pci 0000:00:1c.2: PCI bridge to [bus 03] pci 0000:04:00.0: [1b21:1182] type 01 class 0x060400 PCIe Switch Upstream Port [ 0.992543] pci 0000:04:00.0: PCI bridge to [bus 05-07] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff] pci 0000:04:00.0: bridge window [mem 0xf7100000-0xf72fffff] pci 0000:04:00.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] pci 0000:04:00.0: enabling Extended Tags [ 0.992962] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.993074] pci 0000:00:1c.3: PCI bridge to [bus 04-07] pci 0000:05:03.0: [1b21:1182] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.993260] pci 0000:05:03.0: PCI bridge to [bus 06] pci 0000:05:03.0: bridge window [mem 0xf7200000-0xf72fffff] pci 0000:05:03.0: enabling Extended Tags [ 0.993515] pci 0000:05:03.0: PME# supported from D0 D3hot D3cold [ 0.993610] pci 0000:05:07.0: [1b21:1182] type 01 class 0x060400 PCIe Switch Downstream Port [ 0.993698] pci 0000:05:07.0: PCI bridge to [bus 07] pci 0000:05:07.0: bridge window [io 0xd000-0xdfff] pci 0000:05:07.0: bridge window [mem 0xf7100000-0xf71fffff] pci 0000:05:07.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] pci 0000:05:07.0: enabling Extended Tags [ 0.994179] pci 0000:05:07.0: PME# supported from D0 D3hot D3cold [ 0.994265] pci 0000:04:00.0: PCI bridge to [bus 05-07] pci 0000:06:00.0: [8086:095a] type 00 class 0x028000 PCIe Endpoint [ 0.994443] pci 0000:06:00.0: BAR 0 [mem 0xf7200000-0xf7201fff 64bit] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.994617] pci 0000:05:03.0: PCI bridge to [bus 06] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint [ 0.994794] pci 0000:07:00.0: BAR 0 [io 0xd000-0xd0ff] pci 0000:07:00.0: BAR 2 [mem 0xf7100000-0xf7100fff 64bit] pci 0000:07:00.0: BAR 4 [mem 0xf2100000-0xf2103fff 64bit pref] pci 0000:07:00.0: supports D1 D2 [ 0.995235] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.995325] pci 0000:05:07.0: PCI bridge to [bus 07] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.995336] ACPI: PCI: Interrupt link LNKA disabled [ 0.995340] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.995345] ACPI: PCI: Interrupt link LNKB disabled [ 0.995349] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.995353] ACPI: PCI: Interrupt link LNKC disabled [ 0.995357] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.995361] ACPI: PCI: Interrupt link LNKD disabled [ 0.995365] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.995371] ACPI: PCI: Interrupt link LNKE disabled [ 0.995376] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.995380] ACPI: PCI: Interrupt link LNKF disabled [ 0.995384] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.995388] ACPI: PCI: Interrupt link LNKG disabled [ 0.995392] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.995396] ACPI: PCI: Interrupt link LNKH disabled [ 0.995400] ACPI: EC: interrupt unblocked [ 0.995404] ACPI: EC: event unblocked [ 0.995409] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.995414] ACPI: EC: GPE=0x17 [ 0.995419] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete [ 0.995423] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events [ 0.995428] iommu: Default domain type: Translated [ 0.995432] iommu: DMA domain TLB invalidation policy: strict mode [ 0.995436] pps_core: LinuxPPS API ver. 1 registered [ 0.995440] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.995445] PTP clock support registered [ 0.995449] efivars: Registered efivars operations [ 0.995454] mctp: management component transport protocol core [ 0.995458] NET: Registered PF_MCTP protocol family [ 0.995462] PCI: Using ACPI for IRQ routing [ 0.995466] PCI: pci_cache_line_size set to 64 bytes [ 0.995470] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] e820: reserve RAM buffer [mem 0xcd7e1018-0xcfffffff] e820: reserve RAM buffer [mem 0xceaf6000-0xcfffffff] e820: reserve RAM buffer [mem 0xcf385000-0xcfffffff] e820: reserve RAM buffer [mem 0xdc061000-0xdfffffff] e820: reserve RAM buffer [mem 0xde755000-0xdfffffff] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] e820: reserve RAM buffer [mem 0x61f000000-0x61fffffff] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.995671] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.995753] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.995759] vgaarb: loaded [ 0.995763] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.995767] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.995772] clocksource: Switched to clocksource tsc-early [ 0.995778] VFS: Disk quotas dquot_6.6.0 [ 0.995783] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.995787] pnp: PnP ACPI init [ 0.995874] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.995956] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.996075] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.996159] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.996243] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.996319] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.996394] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.996469] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.996544] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.996618] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.996693] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.996770] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.996845] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.996920] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.996995] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.997108] system 00:07: [mem 0xf7ff0000-0xf7ffffff] has been reserved [ 0.997114] pnp: PnP ACPI: found 8 devices [ 0.997119] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.997124] NET: Registered PF_INET protocol family [ 0.997130] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.997135] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.997139] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.997143] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.997148] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.997152] TCP: Hash tables configured (established 262144 bind 65536) [ 0.997156] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 0.997160] UDP hash table entries: 16384 (order: 8, 1048576 bytes, linear) [ 0.997165] UDP-Lite hash table entries: 16384 (order: 8, 1048576 bytes, linear) [ 0.997170] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.997174] NET: Registered PF_XDP protocol family [ 0.997255] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.2: PCI bridge to [bus 03] pci 0000:00:1c.2: bridge window [mem 0xf7300000-0xf73fffff] pci 0000:05:03.0: PCI bridge to [bus 06] pci 0000:05:03.0: bridge window [mem 0xf7200000-0xf72fffff] pci 0000:05:07.0: PCI bridge to [bus 07] pci 0000:05:07.0: bridge window [io 0xd000-0xdfff] pci 0000:05:07.0: bridge window [mem 0xf7100000-0xf71fffff] pci 0000:05:07.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] pci 0000:04:00.0: PCI bridge to [bus 05-07] pci 0000:04:00.0: bridge window [io 0xd000-0xdfff] pci 0000:04:00.0: bridge window [mem 0xf7100000-0xf72fffff] pci 0000:04:00.0: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 04-07] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.3: bridge window [mem 0xf7100000-0xf72fffff] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000effff window] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff window] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf72fffff] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] pci_bus 0000:05: resource 1 [mem 0xf7100000-0xf72fffff] pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff] pci_bus 0000:07: resource 1 [mem 0xf7100000-0xf71fffff] pci_bus 0000:07: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec [ 1.000689] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 1.000695] PCI: CLS 64 bytes, default 64 [ 1.000700] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.000704] software IO TLB: mapped [mem 0x00000000d8061000-0x00000000dc061000] (64MB) [ 1.000709] Trying to unpack rootfs image as initramfs... [ 1.000713] Initialise system trusted keyrings [ 1.000717] Key type blacklist registered [ 1.000722] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.000728] zbud: loaded [ 1.000732] NET: Registered PF_ALG protocol family [ 1.000736] Key type asymmetric registered [ 1.000740] Asymmetric key parser 'x509' registered [ 1.000745] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.000749] io scheduler mq-deadline registered [ 1.000753] io scheduler bfq registered [ 1.000758] ledtrig-cpu: registered to indicate activity on CPUs [ 1.000838] pcieport 0000:00:01.0: PME: Signaling with IRQ 24 [ 1.000921] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25 [ 1.001017] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26 [ 1.001121] pcieport 0000:00:1c.3: PME: Signaling with IRQ 27 [ 1.001127] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.001132] loop: module loaded [ 1.001136] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12 [ 1.001141] i8042: Detected active multiplexing controller, rev 1.1 [ 1.001145] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.001152] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.001156] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.001161] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.001165] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.001246] rtc_cmos 00:02: RTC can wake from S4 [ 1.001323] rtc_cmos 00:02: registered as rtc0 [ 1.001398] rtc_cmos 00:02: setting system clock to 2025-10-01T14:39:57 UTC (1759329597) [ 1.001473] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.001481] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.001486] intel_pstate: Intel P-state driver initializing [ 1.001490] Key type dns_resolver registered [ 1.001494] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 1.001499] microcode: Current revision: 0x00000028 [ 1.001503] microcode: Updated early from: 0x0000001c [ 1.001508] IPI shorthand broadcast: enabled [ 1.001512] sched_clock: Marking stable (749085703, 159045)->(760684512, -11439764) [ 1.001516] registered taskstats version 1 [ 1.001522] Loading compiled-in X.509 certificates [ 1.001526] Freeing initrd memory: 157084K [ 1.001531] Loaded X.509 cert 'Build time autogenerated kernel key: 8787b7863b0204a42246a0ff0fbed00d24091253' [ 1.001535] Demotion targets for Node 0: null [ 1.001539] Key type .fscrypt registered [ 1.001544] Key type fscrypt-provisioning registered [ 1.001548] RAS: Correctable Errors collector initialized. [ 1.001552] clk: Disabling unused clocks [ 1.001557] PM: genpd: Disabling unused power domains [ 1.001562] Freeing unused decrypted memory: 2028K [ 1.001566] Freeing unused kernel image (initmem) memory: 2952K [ 1.001570] Write protecting the kernel read-only data: 24576k [ 1.001575] Freeing unused kernel image (text/rodata gap) memory: 1224K [ 1.001579] Freeing unused kernel image (rodata/data gap) memory: 940K [ 1.001583] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.001588] x86/mm: Checking user space page tables [ 1.001592] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.001596] Run /init as init process [ 1.001601] with arguments: [ 1.001606] /init [ 1.001610] splash [ 1.001614] with environment: [ 1.001618] HOME=/ [ 1.001622] TERM=linux [ 1.001626] BOOT_IMAGE=/boot/vmlinuz-6.14.2-desktop-3omv2590 [ 1.001630] audit=0 [ 1.001643] NET: Registered PF_INET6 protocol family [ 1.001647] Segment Routing with IPv6 [ 1.001652] RPL Segment Routing with IPv6 [ 1.001656] In-situ OAM (IOAM) with IPv6 [ 1.001775] i2c_dev: i2c /dev entries driver [ 1.157057] device-mapper: uevent: version 1.0.3 [ 1.157134] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: XXX@XXX [ 1.169013] xor: automatically using best checksumming function avx [ 1.188030] raid6: avx2x4 gen() 27273 MB/s [ 1.205031] raid6: avx2x2 gen() 38352 MB/s [ 1.222035] raid6: avx2x1 gen() 37415 MB/s [ 1.222059] raid6: using algorithm avx2x2 gen() 38352 MB/s [ 1.239036] raid6: .... xor() 24922 MB/s, rmw enabled [ 1.239070] raid6: using avx2x2 recovery algorithm [ 1.239083] tsc: Refined TSC clocksource calibration: 3990.758 MHz [ 1.239090] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x730c85718cb, max_idle_ns: 881591244843 ns [ 1.239098] clocksource: Switched to clocksource tsc [ 1.286028] Btrfs loaded, zoned=yes, fsverity=yes [ 1.301042] ACPI: bus type USB registered [ 1.301158] usbcore: registered new interface driver usbfs [ 1.301210] usbcore: registered new interface driver hub [ 1.301260] usbcore: registered new device driver usb [ 1.538013] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input9 [ 1.542198] ACPI: button: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10 [ 1.543009] ACPI: button: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input11 [ 1.548013] ACPI: button: Lid Switch [LID0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12 [ 1.553063] ACPI: battery: Slot [BAT0] (battery present) [ 1.554012] ACPI: button: Power Button [PWRF] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.574047] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.574184] ehci-pci 0000:00:1a.0: debug port 2 [ 1.574298] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7417000 [ 1.574404] ACPI: video: Video Device [PEGP] (multi-head: yes rom: no post: no) [ 1.574412] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input13 [ 1.574419] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.574521] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 1.574605] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.574672] usb usb1: Product: EHCI Host Controller [ 1.574740] usb usb1: Manufacturer: Linux 6.14.2-desktop-3omv2590 ehci_hcd [ 1.574805] usb usb1: SerialNumber: ... [ 1.574869] hub 1-0:1.0: USB hub found [ 1.574973] hub 1-0:1.0: 2 ports detected [ 1.575074] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.584500] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.584686] ehci-pci 0000:00:1d.0: debug port 2 [ 1.589088] cryptd: max_cpu_qlen set to 1000 [ 1.589110] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7416000 [ 1.594732] AES CTR mode by8 optimization enabled [ 1.594747] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.599483] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 1.600115] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.600379] usb usb2: Product: EHCI Host Controller [ 1.600497] usb usb2: Manufacturer: Linux 6.14.2-desktop-3omv2590 ehci_hcd [ 1.600880] usb usb2: SerialNumber: ... [ 1.601155] hub 2-0:1.0: USB hub found [ 1.601630] hub 2-0:1.0: 2 ports detected [ 1.602861] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.610683] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.610840] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.611099] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.612663] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.613237] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.613402] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14 [ 1.613746] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.614539] usb usb3: Product: xHCI Host Controller [ 1.614856] usb usb3: Manufacturer: Linux 6.14.2-desktop-3omv2590 xhci-hcd [ 1.615359] usb usb3: SerialNumber: ... [ 1.615574] hub 3-0:1.0: USB hub found [ 1.615861] hub 3-0:1.0: 14 ports detected [ 1.616398] ACPI: bus type drm_connector registered [ 1.616414] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.616435] sdhci: Secure Digital Host Controller Interface driver [ 1.616447] sdhci: Copyright(c) Pierre Ossman [ 1.616459] Linux agpgart interface v0.103 [ 1.616470] SCSI subsystem initialized [ 1.616481] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14 [ 1.616821] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.617679] usb usb4: Product: xHCI Host Controller [ 1.617802] usb usb4: Manufacturer: Linux 6.14.2-desktop-3omv2590 xhci-hcd [ 1.617919] usb usb4: SerialNumber: ... [ 1.618081] sdhci-pci 0000:03:00.0: SDHCI controller found [10ec:5250] (rev 1) [ 1.619011] sdhci-pci 0000:03:00.0: enabling device (0000 -> 0002) [ 1.619384] hub 4-0:1.0: USB hub found [ 1.620019] hub 4-0:1.0: 6 ports detected [ 1.621151] mmc0: SDHCI controller on PCI [0000:03:00.0] using PIO [ 1.629013] libata version 3.00 loaded. [ 1.634744] ahci 0000:00:1f.2: version 3.0 [ 1.643428] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.643608] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 1.643729] ahci 0000:00:1f.2: 4/6 ports implemented (port mask 0x17) [ 1.643849] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 1.643966] scsi host0: ahci [ 1.644123] scsi host1: ahci [ 1.644235] scsi host2: ahci [ 1.644341] scsi host3: ahci [ 1.644446] scsi host4: ahci [ 1.644559] scsi host5: ahci [ 1.644663] ata1: SATA max UDMA/133 abar m2048@0xf7415000 port 0xf7415100 irq 39 lpm-pol 0 [ 1.644672] ata2: SATA max UDMA/133 abar m2048@0xf7415000 port 0xf7415180 irq 39 lpm-pol 0 [ 1.644678] ata3: SATA max UDMA/133 abar m2048@0xf7415000 port 0xf7415200 irq 39 lpm-pol 0 [ 1.644690] ata4: DUMMY [ 1.644696] ata5: SATA max UDMA/133 abar m2048@0xf7415000 port 0xf7415300 irq 39 lpm-pol 0 [ 1.644702] ata6: DUMMY [ 1.808125] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.949071] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.960071] ata1.00: Model 'INTEL SSDSC2CW120A3', rev '400i', applying quirks: zeroaftertrim [ 1.960133] ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133 [ 1.960161] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.971056] ata1.00: configured for UDMA/133 [ 1.971148] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5 [ 1.973009] usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00 [ 1.974336] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.974468] hub 1-1:1.0: USB hub found [ 1.974656] hub 1-1:1.0: 6 ports detected [ 2.013041] usb 3-2: new full-speed USB device number 2 using xhci_hcd [ 2.013112] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.259032] usb 3-2: New USB device found, idVendor=1c7a, idProduct=0603, bcdDevice= 2.00 [ 2.259885] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.260101] usb 3-2: Product: EgisTec_ES603 [ 2.260283] usb 3-2: Manufacturer: EgisTec [ 2.260448] usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00 [ 2.261500] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.261601] hub 2-1:1.0: USB hub found [ 2.261748] hub 2-1:1.0: 8 ports detected [ 2.348065] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.348133] ata2.00: Model 'Micron 1100 SATA 512GB', rev ' M0DL022', applying quirks: zeroaftertrim [ 2.348164] ata2.00: ATA-10: Micron 1100 SATA 512GB, M0DL022, max UDMA/133 [ 2.350044] ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.352064] ata2.00: Features: Dev-Sleep NCQ-sndrcv NCQ-prio [ 2.356044] ata2.00: configured for UDMA/133 [ 2.356088] scsi 1:0:0:0: Direct-Access ATA Micron 1100 SATA L022 PQ: 0 ANSI: 5 [ 2.478034] usb 3-6: new high-speed USB device number 3 using xhci_hcd [ 2.698101] ata3: SATA link down (SStatus 0 SControl 300) [ 2.829155] psmouse serio2: synaptics: queried max coordinates: x [..5706], y [..4800] usb 3-6: New USB device found, idVendor=5986, idProduct=066d, bcdDevice= 6.05 [ 2.934225] usb 3-6: New USB device strings: Mfr=3, Product=1, SerialNumber=... [ 2.934422] usb 3-6: Product: BisonCam, NB Pro [ 2.934602] usb 3-6: Manufacturer: Generic [ 2.934778] usb 3-6: SerialNumber: ... [ 2.934952] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00033/0x240000/0xa0400/0x0, board id: 1474, fw id: 793787 [ 2.935234] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input15 [ 2.949064] usb 3-7: new full-speed USB device number 4 using xhci_hcd [ 3.006084] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.006192] ata5.00: Model 'Micron 1100 SATA 512GB', rev ' M0DL022', applying quirks: zeroaftertrim [ 3.008111] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(unknown) filtered out [ 3.008202] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(unknown) filtered out [ 3.008229] ata5.00: ATA-10: Micron 1100 SATA 512GB, M0DL022, max UDMA/133 [ 3.011106] ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.012070] ata5.00: Features: Dev-Sleep NCQ-sndrcv NCQ-prio [ 3.013059] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(unknown) filtered out [ 3.013120] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(unknown) filtered out [ 3.018071] ata5.00: configured for UDMA/133 [ 3.018170] scsi 4:0:0:0: Direct-Access ATA Micron 1100 SATA L022 PQ: 0 ANSI: 5 [ 3.025014] ata5.00: Enabling discard_zeroes_data [ 3.025060] ata2.00: Enabling discard_zeroes_data [ 3.025074] sd 4:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 3.034315] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 3.034538] sd 1:0:0:0: [sdc] 1000215216 512-byte logical blocks: (512 GB/477 GiB) [ 3.034657] sd 1:0:0:0: [sdc] 4096-byte physical blocks [ 3.034759] sd 0:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 3.038831] sd 4:0:0:0: [sda] Write Protect is off [ 3.038976] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.039147] sd 1:0:0:0: [sdc] Write Protect is off [ 3.039303] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.039463] sd 0:0:0:0: [sdb] Write Protect is off [ 3.039623] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.039769] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.039897] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.039994] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.040101] sd 4:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 3.040199] sd 1:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes [ 3.040294] sd 0:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 3.040388] ata2.00: Enabling discard_zeroes_data [ 3.040398] ata5.00: Enabling discard_zeroes_data [ 3.040404] sdc: sdc1 [ 3.040410] sd 1:0:0:0: [sdc] Attached SCSI disk [ 3.040505] sda: sda1 [ 3.040511] sd 4:0:0:0: [sda] Attached SCSI disk [ 3.040605] sdb: sdb1 sdb2 [ 3.040612] sd 0:0:0:0: [sdb] Attached SCSI disk [ 3.074008] usb 3-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01 [ 3.075306] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 3.106016] MXM: GUID detected in BIOS [ 3.106058] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM [ 3.170033] nouveau 0000:01:00.0: vgaarb: deactivate vga console [ 3.328677] nouveau 0000:01:00.0: drm: VRAM: 4096 MiB [ 3.329717] nouveau 0000:01:00.0: drm: GART: 1048576 MiB [ 3.330403] nouveau 0000:01:00.0: drm: TMDS table version 2.0 [ 3.331046] nouveau 0000:01:00.0: drm: MM: using COPY for buffer copies [ 3.331523] nouveau 0000:01:00.0: [drm] Registered 4 planes with drm panic [ 3.331879] [drm] Initialized nouveau 1.4.0 for 0000:01:00.0 on minor 0 [ 3.331914] fbcon: nouveaudrmfb (fb0) is primary device [ 3.331926] fbcon: Deferring console take-over [ 3.331937] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device [ 3.436006] EXT4-fs (sda1): mounted filesystem HASH_94A-E6FB-5995-F930-C3480CB17200 ro with ordered data mode. Quota mode: none. [ 4.966857] zram: Added device: zram0 [ 4.967569] fuse: init (API version 7.42) [ 4.967651] EXT4-fs (sda1): re-mounted HASH_94A-E6FB-5995-F930-C3480CB17200 r/w. Quota mode: none. [ 5.074012] zram0: detected capacity change from 0 to 16777216 [ 5.108054] ACPI: AC: AC Adapter [AC] (on-line) [ 5.142801] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDsc [ 5.147483] thermal LNXTHERM:00: registered as thermal_zone0 [ 5.149888] ACPI: thermal: Thermal Zone [TZ0] (61 C) [ 5.168998] mc: Linux media interface: v0.10 [ 5.177016] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20240827/utaddress-204) [ 5.177052] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 5.177068] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20240827/utaddress-204) [ 5.177086] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 5.177098] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20240827/utaddress-204) [ 5.177112] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20240827/utaddress-204) [ 5.177124] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 5.177136] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20240827/utaddress-204) [ 5.177149] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20240827/utaddress-204) [ 5.177161] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 5.177173] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.191025] videodev: Linux video capture interface: v2.00 [ 5.203018] Bluetooth: Core ver 2.22 [ 5.203074] NET: Registered PF_BLUETOOTH protocol family [ 5.203093] Bluetooth: HCI device and connection manager initialized [ 5.203108] Bluetooth: HCI socket layer initialized [ 5.203124] Bluetooth: L2CAP socket layer initialized [ 5.203139] Bluetooth: SCO socket layer initialized [ 5.219014] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.220047] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control [ 5.229150] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.229173] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 5.229187] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 5.229405] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.229611] i2c i2c-15: Successfully instantiated SPD at 0x50 [ 5.229827] i2c i2c-15: Successfully instantiated SPD at 0x51 [ 5.230010] i2c i2c-15: Successfully instantiated SPD at 0x52 [ 5.230179] i2c i2c-15: Successfully instantiated SPD at 0x53 [ 5.230334] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 5.230349] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 5.230362] RAPL PMU: hw unit of domain package 2^-14 Joules [ 5.230376] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 5.230392] r8169 0000:07:00.0 eth0: RTL8168g/8111g, 6BF2355A6D319AD8FB0A6D2508A5B506, XID 4c0, IRQ 41 [ 5.230595] r8169 0000:07:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] usbcore: registered new interface driver btusb [ 5.240015] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002) [ 5.240268] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 5.240462] snd_hda_intel 0000:01:00.1: Disabling MSI [ 5.240641] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 5.248707] usb 3-6: Found UVC 1.00 device BisonCam, NB Pro (5986:066d) [ 5.265183] Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 2 week 39 2013 [ 5.265198] Bluetooth: hci0: Intel device is already patched. patch num: 3b [ 5.265208] usbcore: registered new interface driver uvcvideo [ 5.265215] Intel(R) Wireless WiFi driver for Linux [ 5.265226] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002) [ 5.265669] ACPI: \: failed to evaluate _DSM HASH_502-7D7F-36FC-2FCC-4CF89FC0AEA3 rev:0 func:0 (0x1001) [ 5.265687] ACPI: \: failed to evaluate _DSM HASH_502-7D7F-36FC-2FCC-4CF89FC0AEA3 rev:0 func:0 (0x1001) [ 5.265699] iwlwifi 0000:06:00.0: Detected crf-id 0x0, cnv-id 0x0 wfpm id 0x0 [ 5.265900] iwlwifi 0000:06:00.0: PCI dev 095a/5010, rev=0x184, rfid=0xd55555d5 [ 5.274358] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7265 [ 5.295353] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau]) [ 5.295548] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18 [ 5.295567] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19 [ 5.295580] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20 [ 5.295592] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21 [ 5.295604] iwlwifi 0000:06:00.0: loaded firmware version 17.bfb58538.0 7265-17.ucode op_mode iwlmvm [ 5.346016] iTCO_vendor_support: vendor-support=0 [ 5.367009] iTCO_wdt iTCO_wdt.1.auto: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860) [ 5.374909] r8169 0000:07:00.0 enp7s0: renamed from eth0 [ 5.377452] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 5.378563] at24 15-0050: supply vcc not found, using dummy regulator [ 5.379614] at24 15-0050: 256 byte spd EEPROM, read-only [ 5.380388] at24 15-0051: supply vcc not found, using dummy regulator [ 5.382457] at24 15-0051: 256 byte spd EEPROM, read-only [ 5.383774] at24 15-0052: supply vcc not found, using dummy regulator [ 5.385177] at24 15-0052: 256 byte spd EEPROM, read-only [ 5.386365] at24 15-0053: supply vcc not found, using dummy regulator [ 5.387846] at24 15-0053: 256 byte spd EEPROM, read-only [ 5.389514] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:line [ 5.400347] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 5.400573] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.400741] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 5.400866] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 5.401019] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 5.401152] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 5.401287] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 5.401424] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 5.401553] intel_rapl_common: Found RAPL domain package [ 5.401568] intel_rapl_common: Found RAPL domain core [ 5.401584] intel_rapl_common: Found RAPL domain dram [ 5.401610] iwlwifi 0000:06:00.0: base HW address: 8B91C74B6568ADF0AF8BF508C615EF6D, OTP minor version: 0x0 [ 5.401870] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 [ 5.401892] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 [ 5.401914] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 [ 5.401934] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 [ 5.401959] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 [ 5.473036] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.476010] iwlwifi 0000:06:00.0 wlp6s0: renamed from wlan0 [ 5.937370] EXT4-fs (sdc1): mounted filesystem HASH_F37-C87C-A9B0-D5F2-4D4173B83EF0 r/w with ordered data mode. Quota mode: none. [ 5.938009] EXT4-fs (sdb2): mounted filesystem HASH_966-E277-19EC-CF1F-F8965EF033E8 r/w with ordered data mode. Quota mode: none. [ 5.940007] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 6.187014] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.187047] Bluetooth: BNEP filters: protocol multicast [ 6.187060] Bluetooth: BNEP socket layer initialized [ 6.189021] Bluetooth: MGMT ver 1.23 [ 6.304013] Generic FE-GE Realtek PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC) [ 6.463007] r8169 0000:07:00.0 enp7s0: Link is Down [ 6.561010] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:1 (0x1001) [ 6.561054] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:6 (0x1001) [ 6.561070] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:7 (0x1001) [ 6.561086] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:8 (0x1001) [ 6.561104] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:3 (0x1001) [ 6.561117] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:9 (0x1001) [ 6.561130] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:10 (0x1001) [ 6.561142] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:12 (0x1001) [ 6.561158] iwlwifi 0000:06:00.0: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 6.674020] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:1 (0x1001) [ 6.674103] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:6 (0x1001) [ 6.674122] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:7 (0x1001) [ 6.674133] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:8 (0x1001) [ 6.674145] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:3 (0x1001) [ 6.674160] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:9 (0x1001) [ 6.674174] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:10 (0x1001) [ 6.674202] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:12 (0x1001) [ 6.760016] NET: Registered PF_PACKET protocol family [ 7.475021] Bluetooth: RFCOMM TTY layer initialized [ 7.475089] Bluetooth: RFCOMM socket layer initialized [ 7.475110] Bluetooth: RFCOMM ver 1.11 [ 9.882024] wlp6s0: authenticate with 2164EA171707BDD98A93D9222164A1A3 (local address=8B91C74B6568ADF0AF8BF508C615EF6D) [ 9.882846] wlp6s0: send auth to 2164EA171707BDD98A93D9222164A1A3 (try 1/3) [ 9.918013] wlp6s0: authenticate with 2164EA171707BDD98A93D9222164A1A3 (local address=8B91C74B6568ADF0AF8BF508C615EF6D) [ 9.918046] wlp6s0: send auth to 2164EA171707BDD98A93D9222164A1A3 (try 1/3) [ 9.934013] wlp6s0: authenticated [ 9.934040] wlp6s0: associate with 2164EA171707BDD98A93D9222164A1A3 (try 1/3) [ 9.936014] wlp6s0: RX AssocResp from 2164EA171707BDD98A93D9222164A1A3 (capab=0x1111 status=0 aid=22) [ 9.938011] wlp6s0: associated [ 10.004020] wlp6s0: Limiting TX power to 36 (36 - 0) dBm as advertised by 2164EA171707BDD98A93D9222164A1A3 [ 10.733014] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 13.299014] htmlscript[1209]: segfault at 10 ip 00007f56fb0b2cd6 sp 00007ffda8353a20 error 4 in libgallium-25.0.7.so[22b1cd6,7f56f9d77000+1de3000] likely on CPU 6 (core 2, socket 0) [ 13.299090] Code: 00 00 66 83 7e 48 01 0f 87 8e 00 00 00 49 89 d7 49 89 f6 48 89 fb bf 01 00 00 00 be 98 01 00 00 e8 2f 3f aa 00 48 85 c0 74 71 <49> 8b 4f 10 48 89 88 80 00 00 00 0f b6 51 18 80 e2 03 88 90 8d 00 [ 79.689031] htmlscript[1540]: segfault at 10 ip 00007fa0af0b2cd6 sp 00007fff2ce72200 error 4 in libgallium-25.0.7.so[22b1cd6,7fa0add77000+1de3000] likely on CPU 2 (core 2, socket 0) [ 79.689157] Code: 00 00 66 83 7e 48 01 0f 87 8e 00 00 00 49 89 d7 49 89 f6 48 89 fb bf 01 00 00 00 be 98 01 00 00 e8 2f 3f aa 00 48 85 c0 74 71 <49> 8b 4f 10 48 89 88 80 00 00 00 0f b6 51 18 80 e2 03 88 90 8d 00 [ 443.823030] Non-volatile memory driver v1.3 [ 443.984012] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 443.995014] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 443.995248] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 443.995424] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 444.525033] r8169 0000:07:00.0: invalid VPD tag 0x00 (size 0) at offset 0; assume missing optional EEPROM [ 853.720054] usb 3-10: new low-speed USB device number 5 using xhci_hcd [ 853.846035] usb 3-10: New USB device found, idVendor=18f8, idProduct=1286, bcdDevice= 1.00 [ 853.847432] usb 3-10: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 853.847665] usb 3-10: Product: USB GAMING MOUSE [ 853.861027] hid: raw HID events driver (C) Jiri Kosina [ 853.869022] usbcore: registered new interface driver usbhid [ 853.869073] usbhid: USB HID core driver [ 853.873010] input: USB GAMING MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:18F8:1286.0001/input/input27 [ 853.874017] hid-generic 0003:18F8:1286.0001: input,hidraw0: USB HID v1.10 Mouse [USB GAMING MOUSE ] on usb-0000:00:14.0-10/input0 [ 853.874221] input: USB GAMING MOUSE Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/0003:18F8:1286.0002/input/input28 [ 853.925016] hid-generic 0003:18F8:1286.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [USB GAMING MOUSE ] on usb-0000:00:14.0-10/input1 [ 6269.030011] wlp6s0: deauthenticating from 2164EA171707BDD98A93D9222164A1A3 by local choice (Reason: 3=DEAUTH_LEAVING) [ 6269.406212] PM: suspend entry (deep) [ 6269.412029] Filesystems sync: 0.005 seconds [ 6272.493803] Freezing user space processes [ 6272.493921] Freezing user space processes completed (elapsed 0.000 seconds) [ 6272.493949] OOM killer disabled. [ 6272.493971] Freezing remaining freezable tasks [ 6272.493992] Freezing remaining freezable tasks completed (elapsed 0.000 seconds) [ 6272.494021] printk: Suspending console(s) (use no_console_suspend to debug) [ 6272.494041] sd 1:0:0:0: [sdc] Synchronizing SCSI cache [ 6272.494391] sd 0:0:0:0: [sdb] Synchronizing SCSI cache [ 6272.494585] ata1.00: Entering standby power mode [ 6272.494604] sd 4:0:0:0: [sda] Synchronizing SCSI cache [ 6272.494763] ata2.00: Entering standby power mode [ 6272.494789] ata5.00: Entering standby power mode [ 6272.494801] ACPI: EC: interrupt blocked [ 6272.494813] ACPI: PM: Preparing to enter system sleep state S3 [ 6272.494825] ACPI: EC: event blocked [ 6272.494836] ACPI: EC: EC stopped [ 6272.494855] ACPI: PM: Saving platform NVS memory [ 6272.494876] Disabling non-boot CPUs ... [ 6272.494886] smpboot: CPU 7 is now offline [ 6272.494903] smpboot: CPU 6 is now offline [ 6272.494921] smpboot: CPU 5 is now offline [ 6272.494935] smpboot: CPU 4 is now offline [ 6272.494945] smpboot: CPU 3 is now offline [ 6272.494956] smpboot: CPU 2 is now offline [ 6272.494964] smpboot: CPU 1 is now offline [ 6272.494972] ACPI: PM: Low-level resume complete [ 6272.494982] ACPI: EC: EC started [ 6272.494991] ACPI: PM: Restoring platform NVS memory [ 6272.495006] Enabling non-boot CPUs ... [ 6272.495019] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 6272.495031] CPU1 is up [ 6272.495047] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 6272.495062] CPU2 is up [ 6272.495074] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 6272.495081] CPU3 is up [ 6272.495092] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 6272.495103] CPU4 is up [ 6272.495114] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 6272.495124] CPU5 is up [ 6272.495136] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 6272.495153] CPU6 is up [ 6272.495165] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 6272.495175] CPU7 is up [ 6272.495184] ACPI: PM: Waking up from system sleep state S3 [ 6272.495191] ACPI: EC: interrupt unblocked [ 6272.495238] ACPI: EC: event unblocked [ 6272.495247] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:1 (0x1001) [ 6272.495261] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:6 (0x1001) [ 6272.495277] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:7 (0x1001) [ 6272.495294] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:8 (0x1001) [ 6272.495304] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:3 (0x1001) [ 6272.495312] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:9 (0x1001) [ 6272.495319] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:10 (0x1001) [ 6272.495327] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:12 (0x1001) [ 6272.495339] nouveau 0000:01:00.0: devinit: 0x00006d43[0]: script needs OR link [ 6272.495506] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6272.495527] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6272.495538] ata3: SATA link down (SStatus 0 SControl 300) [ 6272.495547] sd 1:0:0:0: [sdc] Starting disk [ 6272.495705] ata2.00: configured for UDMA/133 [ 6272.495733] ata2.00: Enabling discard_zeroes_data [ 6272.495746] sd 0:0:0:0: [sdb] Starting disk [ 6272.495898] ata1.00: configured for UDMA/133 [ 6272.495910] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6272.495920] usb 3-6: reset high-speed USB device number 3 using xhci_hcd [ 6272.496069] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(unknown) filtered out [ 6272.496089] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(unknown) filtered out [ 6272.496111] sd 4:0:0:0: [sda] Starting disk [ 6272.496274] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(unknown) filtered out [ 6272.496292] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(unknown) filtered out [ 6272.496308] ata5.00: configured for UDMA/133 [ 6272.496325] ata5.00: Enabling discard_zeroes_data [ 6272.496340] usb 3-7: reset full-speed USB device number 4 using xhci_hcd [ 6272.496523] pci_bus 0000:05: Allocating resources [ 6272.496704] OOM killer enabled. [ 6272.496720] Restarting tasks ... [ 6272.496734] usb 3-2: USB disconnect, device number 2 [ 6272.496794] done. [ 6272.496844] PM: suspend exit [ 6272.558034] Generic FE-GE Realtek PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC) [ 6272.607312] usb 3-2: new full-speed USB device number 6 using xhci_hcd [ 6272.719053] r8169 0000:07:00.0 enp7s0: Link is Down [ 6272.734043] usb 3-2: New USB device found, idVendor=1c7a, idProduct=0603, bcdDevice= 2.00 [ 6272.734825] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6272.735059] usb 3-2: Product: EgisTec_ES603 [ 6272.735260] usb 3-2: Manufacturer: EgisTec [ 6272.833015] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:1 (0x1001) [ 6272.833102] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:6 (0x1001) [ 6272.833121] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:7 (0x1001) [ 6272.833146] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:8 (0x1001) [ 6272.833162] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:3 (0x1001) [ 6272.833184] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:9 (0x1001) [ 6272.833199] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:10 (0x1001) [ 6272.833213] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:12 (0x1001) [ 6272.936855] psmouse serio2: synaptics: queried max coordinates: x [..5706], y [..4800] Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 2 week 39 2013 [ 6273.192037] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.d.bseq [ 6273.456050] Bluetooth: hci0: Intel BT fw patch 0x3b completed & activated [ 6273.510020] Bluetooth: MGMT ver 1.23 [ 6275.709025] wlp6s0: authenticate with 2164EA171707BDD98A93D9222164A1A3 (local address=8B91C74B6568ADF0AF8BF508C615EF6D) [ 6275.710021] wlp6s0: send auth to 2164EA171707BDD98A93D9222164A1A3 (try 1/3) [ 6275.745019] wlp6s0: authenticate with 2164EA171707BDD98A93D9222164A1A3 (local address=8B91C74B6568ADF0AF8BF508C615EF6D) [ 6275.745041] wlp6s0: send auth to 2164EA171707BDD98A93D9222164A1A3 (try 1/3) [ 6275.760027] wlp6s0: authenticated [ 6275.763022] wlp6s0: associate with 2164EA171707BDD98A93D9222164A1A3 (try 1/3) [ 6275.764014] wlp6s0: RX AssocResp from 2164EA171707BDD98A93D9222164A1A3 (capab=0x1111 status=0 aid=20) [ 6275.766009] wlp6s0: associated [ 6275.810028] wlp6s0: Limiting TX power to 36 (36 - 0) dBm as advertised by 2164EA171707BDD98A93D9222164A1A3 [ 6639.703016] wlp6s0: deauthenticating from 2164EA171707BDD98A93D9222164A1A3 by local choice (Reason: 3=DEAUTH_LEAVING) [ 6640.121205] PM: suspend entry (deep) [ 6640.132006] Filesystems sync: 0.010 seconds [ 6645.009806] Freezing user space processes [ 6645.009893] Freezing user space processes completed (elapsed 0.001 seconds) [ 6645.009916] OOM killer disabled. [ 6645.009933] Freezing remaining freezable tasks [ 6645.009951] Freezing remaining freezable tasks completed (elapsed 0.000 seconds) [ 6645.009966] printk: Suspending console(s) (use no_console_suspend to debug) [ 6645.009996] sd 4:0:0:0: [sda] Synchronizing SCSI cache [ 6645.010302] sd 0:0:0:0: [sdb] Synchronizing SCSI cache [ 6645.010488] ata5.00: Entering standby power mode [ 6645.010509] ata1.00: Entering standby power mode [ 6645.010534] sd 1:0:0:0: [sdc] Synchronizing SCSI cache [ 6645.010702] ata2.00: Entering standby power mode [ 6645.010719] ACPI: EC: interrupt blocked [ 6645.010737] ACPI: PM: Preparing to enter system sleep state S3 [ 6645.010756] ACPI: EC: event blocked [ 6645.010772] ACPI: EC: EC stopped [ 6645.010791] ACPI: PM: Saving platform NVS memory [ 6645.010814] Disabling non-boot CPUs ... [ 6645.010827] smpboot: CPU 7 is now offline [ 6645.010844] smpboot: CPU 6 is now offline [ 6645.010861] smpboot: CPU 5 is now offline [ 6645.010876] smpboot: CPU 4 is now offline [ 6645.010891] smpboot: CPU 3 is now offline [ 6645.010909] smpboot: CPU 2 is now offline [ 6645.010926] smpboot: CPU 1 is now offline [ 6645.010940] ACPI: PM: Low-level resume complete [ 6645.010956] ACPI: EC: EC started [ 6645.010975] ACPI: PM: Restoring platform NVS memory [ 6645.010988] Enabling non-boot CPUs ... [ 6645.011008] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 6645.011029] CPU1 is up [ 6645.011044] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 6645.011062] CPU2 is up [ 6645.011078] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 6645.011097] CPU3 is up [ 6645.011114] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 6645.011137] CPU4 is up [ 6645.011155] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 6645.011173] CPU5 is up [ 6645.011192] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 6645.011209] CPU6 is up [ 6645.011226] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 6645.011247] CPU7 is up [ 6645.011266] ACPI: PM: Waking up from system sleep state S3 [ 6645.011280] ACPI: EC: interrupt unblocked [ 6645.011300] ACPI: EC: event unblocked [ 6645.011316] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:1 (0x1001) [ 6645.011346] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:6 (0x1001) [ 6645.011368] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:7 (0x1001) [ 6645.011390] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:8 (0x1001) [ 6645.011412] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:3 (0x1001) [ 6645.011436] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:9 (0x1001) [ 6645.011455] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:10 (0x1001) [ 6645.011474] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:12 (0x1001) [ 6645.011491] usb 3-6: reset high-speed USB device number 3 using xhci_hcd [ 6645.011700] nouveau 0000:01:00.0: devinit: 0x00006d43[0]: script needs OR link [ 6645.011918] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6645.011945] ata3: SATA link down (SStatus 0 SControl 300) [ 6645.011964] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6645.011986] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(unknown) filtered out [ 6645.012031] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(unknown) filtered out [ 6645.012067] sd 4:0:0:0: [sda] Starting disk [ 6645.012241] sd 0:0:0:0: [sdb] Starting disk [ 6645.012934] ata5.00: ACPI cmd f5/9B615E889BC3EDDF63600C8DAA6D56CC(unknown) filtered out [ 6645.013273] ata5.00: ACPI cmd b1/207BA580DF79C86BD455E95957D8792E(unknown) filtered out [ 6645.013299] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6645.013321] ata5.00: configured for UDMA/133 [ 6645.013337] ata5.00: Enabling discard_zeroes_data [ 6645.013357] sd 1:0:0:0: [sdc] Starting disk [ 6645.013536] ata1.00: configured for UDMA/133 [ 6645.013555] ata2.00: configured for UDMA/133 [ 6645.013573] ata2.00: Enabling discard_zeroes_data [ 6645.013588] usb 3-7: reset full-speed USB device number 4 using xhci_hcd [ 6645.013782] psmouse serio2: synaptics: queried max coordinates: x [..5706], y [..4800] pci_bus 0000:05: Allocating resources [ 6645.014935] OOM killer enabled. [ 6645.014956] Restarting tasks ... [ 6645.014968] usb 3-2: USB disconnect, device number 6 [ 6645.015034] done. [ 6645.015113] PM: suspend exit [ 6645.045024] Generic FE-GE Realtek PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC) [ 6645.123057] usb 3-2: new full-speed USB device number 7 using xhci_hcd [ 6645.224032] r8169 0000:07:00.0 enp7s0: Link is Down [ 6645.247983] usb 3-2: New USB device found, idVendor=1c7a, idProduct=0603, bcdDevice= 2.00 [ 6645.248702] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6645.248957] usb 3-2: Product: EgisTec_ES603 [ 6645.249174] usb 3-2: Manufacturer: EgisTec [ 6645.249362] usb 3-10: USB disconnect, device number 5 [ 6645.339012] Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 2 week 39 2013 [ 6645.339109] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-XXX.XXX.XXX.XXX.d.bseq [ 6645.346030] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:1 (0x1001) [ 6645.346055] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:6 (0x1001) [ 6645.346066] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:7 (0x1001) [ 6645.346076] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:8 (0x1001) [ 6645.346086] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:3 (0x1001) [ 6645.346095] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:9 (0x1001) [ 6645.346105] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:10 (0x1001) [ 6645.346114] ACPI: \: failed to evaluate _DSM HASH_113-6043-51B0-CEED-ECEA2740CECB rev:0 func:12 (0x1001) [ 6645.598131] Bluetooth: hci0: Intel BT fw patch 0x3b completed & activated [ 6645.651025] Bluetooth: MGMT ver 1.23 [ 6648.347010] wlp6s0: authenticate with 2164EA171707BDD98A93D9222164A1A3 (local address=8B91C74B6568ADF0AF8BF508C615EF6D) [ 6648.347050] wlp6s0: send auth to 2164EA171707BDD98A93D9222164A1A3 (try 1/3) [ 6648.384023] wlp6s0: authenticate with 2164EA171707BDD98A93D9222164A1A3 (local address=8B91C74B6568ADF0AF8BF508C615EF6D) [ 6648.384053] wlp6s0: send auth to 2164EA171707BDD98A93D9222164A1A3 (try 1/3) [ 6648.399052] wlp6s0: authenticated [ 6648.399079] wlp6s0: associate with 2164EA171707BDD98A93D9222164A1A3 (try 1/3) [ 6648.401778] wlp6s0: RX AssocResp from 2164EA171707BDD98A93D9222164A1A3 (capab=0x1111 status=0 aid=22) [ 6648.403011] wlp6s0: associated [ 6648.444106] wlp6s0: Limiting TX power to 36 (36 - 0) dBm as advertised by 2164EA171707BDD98A93D9222164A1A3 [ 6950.344185] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd [ 6950.377938] usb 4-3: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 6950.378213] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6950.378333] usb 4-3: Product: SanDisk 3.2Gen1 [ 6950.378443] usb 4-3: Manufacturer: USB [ 6950.378550] usb 4-3: SerialNumber: ... [ 6950.378656] usb-storage 4-3:1.0: USB Mass Storage device detected [ 6950.378783] scsi host6: usb-storage 4-3:1.0 [ 6950.378895] usbcore: registered new interface driver usb-storage [ 6950.378908] usbcore: registered new interface driver uas [ 6951.384023] scsi 6:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 6951.417487] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 6951.417711] sd 6:0:0:0: [sdd] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB) [ 6951.417891] sd 6:0:0:0: [sdd] Write Protect is off [ 6951.418042] sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00 [ 6951.418225] sd 6:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 6951.418340] sdd: sdd1 sdd2 [ 6951.418355] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 6954.468070] wlp6s0: deauthenticating from 2164EA171707BDD98A93D9222164A1A3 by local choice (Reason: 3=DEAUTH_LEAVING)