[ 0.577427] i2c_dev: i2c /dev entries driver [ 0.583431] scsi_mod: unknown parameter 'use_blk_mq' ignored [ 0.583626] SCSI subsystem initialized [ 0.587928] device-mapper: uevent: version 1.0.3 [ 0.587968] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 0.743487] xor: automatically using best checksumming function avx [ 0.762158] raid6: avx2x4 gen() 17428 MB/s [ 0.779156] raid6: avx2x2 gen() 17923 MB/s [ 0.796155] raid6: avx2x1 gen() 17479 MB/s [ 0.796157] raid6: using algorithm avx2x2 gen() 17923 MB/s [ 0.813155] raid6: .... xor() 11689 MB/s, rmw enabled [ 0.813156] raid6: using avx2x2 recovery algorithm [ 0.867820] Btrfs loaded, zoned=yes, fsverity=yes [ 0.882977] ACPI: bus type USB registered [ 0.883006] usbcore: registered new interface driver usbfs [ 0.883015] usbcore: registered new interface driver hub [ 0.883025] usbcore: registered new device driver usb [ 1.124763] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 1.128320] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.133594] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.133877] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.135222] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.135229] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.136120] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.136252] ACPI: button: Power Button [PWRF] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 1.136851] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.136856] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.136859] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.136904] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 1.136907] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.136956] usb usb1: Product: xHCI Host Controller [ 1.136958] usb usb1: Manufacturer: Linux 6.6.2-desktop-1omv2390 xhci-hcd [ 1.136960] usb usb1: SerialNumber: ... [ 1.147013] hub 1-0:1.0: USB hub found [ 1.147233] hub 1-0:1.0: 15 ports detected [ 1.147587] serial 0000:00:16.3: enabling device (0000 -> 0003) [ 1.153548] cryptd: max_cpu_qlen set to 1000 [ 1.156119] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.161309] 0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A [ 1.162460] AVX2 version of gcm_enc/dec engaged. [ 1.162490] AES CTR mode by8 optimization enabled [ 1.163017] libata version 3.00 loaded. [ 1.167818] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.167835] ehci-pci 0000:00:1a.0: debug port 2 [ 1.168170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 [ 1.168173] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.168175] usb usb2: Product: xHCI Host Controller [ 1.168177] usb usb2: Manufacturer: Linux 6.6.2-desktop-1omv2390 xhci-hcd [ 1.168178] usb usb2: SerialNumber: ... [ 1.168301] hub 2-0:1.0: USB hub found [ 1.168320] hub 2-0:1.0: 6 ports detected [ 1.169011] usb: port power management may be unreliable [ 1.171769] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7237000 [ 1.178163] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.178200] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 1.178203] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.178205] usb usb3: Product: EHCI Host Controller [ 1.178206] usb usb3: Manufacturer: Linux 6.6.2-desktop-1omv2390 ehci_hcd [ 1.178208] usb usb3: SerialNumber: ... [ 1.178334] hub 3-0:1.0: USB hub found [ 1.178339] hub 3-0:1.0: 3 ports detected [ 1.178523] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.178530] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 1.178545] ehci-pci 0000:00:1d.0: debug port 2 [ 1.182474] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7236000 [ 1.189163] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.189190] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 1.189193] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.189195] usb usb4: Product: EHCI Host Controller [ 1.189196] usb usb4: Manufacturer: Linux 6.6.2-desktop-1omv2390 ehci_hcd [ 1.189198] usb usb4: SerialNumber: ... [ 1.189308] hub 4-0:1.0: USB hub found [ 1.189313] hub 4-0:1.0: 3 ports detected [ 1.201927] ata_piix 0000:00:1f.2: version 2.13 [ 1.202030] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] tsc: Refined TSC clocksource calibration: 3591.680 MHz [ 1.279166] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33c5a00cda5, max_idle_ns: 440795322483 ns [ 1.279179] clocksource: Switched to clocksource tsc [ 1.358521] scsi host0: ata_piix [ 1.358644] scsi host1: ata_piix [ 1.358688] ata1: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf050 irq 19 [ 1.358693] ata2: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf058 irq 19 [ 1.408162] usb 1-4: new low-speed USB device number 2 using xhci_hcd [ 1.416161] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.432160] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.537848] usb 1-4: New USB device found, idVendor=c0f4, idProduct=04d0, bcdDevice= 1.10 [ 1.537851] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.537853] usb 1-4: Product: Usb KeyBoard [ 1.537855] usb 1-4: Manufacturer: Usb KeyBoard [ 1.544572] usb 3-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 1.544576] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.544741] hub 3-1:1.0: USB hub found [ 1.544819] hub 3-1:1.0: 6 ports detected [ 1.545182] hid: raw HID events driver (C) Jiri Kosina [ 1.560574] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 1.560578] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.560738] hub 4-1:1.0: USB hub found [ 1.560819] hub 4-1:1.0: 8 ports detected [ 1.653156] usb 1-5: new full-speed USB device number 3 using xhci_hcd [ 1.780519] usb 1-5: string descriptor 0 read error: -22 [ 1.780523] usb 1-5: New USB device found, idVendor=0489, idProduct=e056, bcdDevice= 0.02 [ 1.780526] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.896160] usb 1-6: new high-speed USB device number 4 using xhci_hcd [ 2.022956] usb 1-6: config 1 interface 0 altsetting 0 endpoint 0x83 has an invalid bInterval 32, changing to 9 [ 2.023208] usb 1-6: New USB device found, idVendor=1b3f, idProduct=2247, bcdDevice= 1.00 [ 2.023211] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.023213] usb 1-6: Product: GENERAL WEBCAM [ 2.023214] usb 1-6: Manufacturer: GENERAL [ 2.138157] usb 1-9: new full-speed USB device number 5 using xhci_hcd [ 2.269824] usb 1-9: New USB device found, idVendor=248a, idProduct=10ab, bcdDevice= 1.00 [ 2.269828] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.269829] usb 1-9: Product: Wireless Receiver [ 2.269831] usb 1-9: Manufacturer: Telink [ 2.269832] usb 1-9: SerialNumber: ... [ 2.284569] usbcore: registered new interface driver usbhid [ 2.284571] usbhid: USB HID core driver [ 2.702163] ata1.01: failed to resume link (SControl 0) [ 2.702241] ata2.01: failed to resume link (SControl 0) [ 2.854218] ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.854230] ata2.01: SATA link down (SStatus 4 SControl 0) [ 2.854399] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.854413] ata1.01: SATA link down (SStatus 4 SControl 0) [ 2.856625] ata2.00: ATA-11: P3-2TB, SN12574, max UDMA/133 [ 2.856629] ata2.00: 4000797360 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.859731] ata2.00: configured for UDMA/133 [ 2.873351] ata1.00: ATAPI: PLDS DVD+/-RW DS-8ABSH, LD11, max UDMA/133 [ 2.911353] ata1.00: configured for UDMA/133 [ 2.923012] scsi 0:0:0:0: CD-ROM PLDS DVD+-RW DS-8ABSH LD11 PQ: 0 ANSI: 5 [ 2.943758] scsi 1:0:0:0: Direct-Access ATA P3-2TB 574 PQ: 0 ANSI: 5 [ 2.946580] input: Usb KeyBoard Usb KeyBoard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:C0F4:04D0.0001/input/input2 [ 2.974906] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.974910] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.993637] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.993749] sd 1:0:0:0: [sda] 4000797360 512-byte logical blocks: (2.05 TB/1.86 TiB) [ 2.993756] sd 1:0:0:0: [sda] Write Protect is off [ 2.993758] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.993767] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.993780] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.995976] sda: sda1 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 [ 2.996189] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.998223] hid-generic 0003:C0F4:04D0.0001: input,hidraw0: USB HID v1.10 Keyboard [Usb KeyBoard Usb KeyBoard] on usb-0000:00:14.0-4/input0 [ 2.998398] input: Usb KeyBoard Usb KeyBoard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:C0F4:04D0.0002/input/input3 [ 3.051235] input: Usb KeyBoard Usb KeyBoard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:C0F4:04D0.0002/input/input4 [ 3.051288] hid-generic 0003:C0F4:04D0.0002: input,hidraw1: USB HID v1.10 Device [Usb KeyBoard Usb KeyBoard] on usb-0000:00:14.0-4/input1 [ 3.051550] input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:248A:10AB.0003/input/input5 [ 3.051608] input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:248A:10AB.0003/input/input6 [ 3.093728] BTRFS: device fsid HASH_DB9-541C-73E8-8467-E6923A744449 devid 1 transid 397 /dev/sda10 scanned by (udev-worker) (415) [ 3.096990] BTRFS: device fsid HASH_D25-1AE1-E4F9-6E9B-F23A9409EF4A devid 1 transid 366 /dev/sda11 scanned by (udev-worker) (406) [ 3.103260] input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:248A:10AB.0003/input/input7 [ 3.103405] hid-generic 0003:248A:10AB.0003: input,hidraw2: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:14.0-9/input0 [ 3.103580] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:248A:10AB.0004/input/input8 [ 3.155319] hid-generic 0003:248A:10AB.0004: input,hidraw3: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:14.0-9/input1 [ 3.170336] BTRFS info (device sda10): using crc32c (crc32c-intel) checksum algorithm [ 3.170346] BTRFS info (device sda10): using free space tree [ 3.178942] BTRFS info (device sda10): enabling ssd optimizations [ 3.178945] BTRFS info (device sda10): auto enabling async discard [ 4.150146] Linux agpgart interface v0.103 [ 4.165426] fuse: init (API version 7.39) [ 4.179987] ACPI: bus type drm_connector registered [ 4.339635] zram0: detected capacity change from 0 to 16777216 [ 4.387140] ACPI: \_TZ_.TZ00: Invalid active0 threshold [ 4.387305] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.387307] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 4.387969] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.387972] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 4.413861] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20230628/utaddress-204) [ 4.413869] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.413876] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230628/utaddress-204) [ 4.413880] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.413881] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20230628/utaddress-204) [ 4.413884] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230628/utaddress-204) [ 4.413887] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.413888] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20230628/utaddress-204) [ 4.413891] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230628/utaddress-204) [ 4.413893] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 4.413894] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.417189] tpm_tis 00:07: 1.2 TPM (device-id 0x0, rev-id 78) [ 4.418869] e1000e: Intel(R) PRO/1000 Network Driver [ 4.418870] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.419014] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.424093] mc: Linux media interface: v0.10 [ 4.453533] Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSDsc [ 4.455024] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.458257] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.464956] Bluetooth: Core ver 2.22 [ 4.464971] NET: Registered PF_BLUETOOTH protocol family [ 4.464972] Bluetooth: HCI device and connection manager initialized [ 4.464975] Bluetooth: HCI socket layer initialized [ 4.464976] Bluetooth: L2CAP socket layer initialized [ 4.464977] Bluetooth: SCO socket layer initialized [ 4.466040] videodev: Linux video capture interface: v2.00 [ 4.471899] BTRFS info (device sda11): using crc32c (crc32c-intel) checksum algorithm [ 4.471909] BTRFS info (device sda11): enabling auto defrag [ 4.471911] BTRFS info (device sda11): turning on sync discard [ 4.471913] BTRFS info (device sda11): use lzo compression, level 0 [ 4.471915] BTRFS info (device sda11): using free space tree [ 4.484413] BTRFS info (device sda11): enabling ssd optimizations [ 4.489804] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 4.530718] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 4.530783] snd_hda_intel 0000:01:00.1: Disabling MSI [ 4.530789] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 4.536830] usb 1-6: Warning! Unlikely big volume range (=5120), cval->res is probably wrong. [ 4.536834] usb 1-6: [5] FU [Mic Capture Volume] ch = 1, val = 7680/12800/1 [ 4.537009] usbcore: registered new interface driver snd-usb-audio [ 4.537171] usb 1-6: Found UVC 1.00 device GENERAL WEBCAM (1b3f:2247) [ 4.539565] usb 1-6: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 4.539791] usbcore: registered new interface driver uvcvideo [ 4.552498] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 1F028407DE0BBBD8AE06F847B6D5489A [ 4.552508] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.552534] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 4.568450] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 4.568473] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.570100] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ 4.570380] i2c i2c-0: 4/4 memory slots populated (from DMI) [ 4.570678] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 4.570967] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 4.571278] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 4.571577] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 4.576405] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9 [ 4.576440] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10 [ 4.576476] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input11 [ 4.576503] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12 [ 4.576972] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/HASH_F6F-461E-5551-B932-4B79FFAD3E75/input/input13 [ 4.584121] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 4.584125] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.584126] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.584127] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 4.586622] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line [ 4.586627] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 4.586629] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 4.586632] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 4.586633] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 4.586635] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x1a [ 4.586637] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 4.599343] ath9k 0000:03:00.0: enabling device (0000 -> 0002) [ 4.611412] usbcore: registered new interface driver btusb [ 4.612286] ath: phy0: ASPM enabled: 0x43 [ 4.612290] ath: EEPROM regdomain: 0x6c [ 4.612291] ath: EEPROM indicates we should expect a direct regpair map [ 4.612292] ath: Country alpha2 being used: 00 [ 4.612293] ath: Regpair used: 0x6c [ 4.612813] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 4.614498] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0x0000000023c9ac40, irq=16 [ 4.616272] usbcore: registered new interface driver ath3k [ 4.629062] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14 [ 4.629122] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 4.629183] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ 4.629266] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ 4.663534] e1000e 0000:00:19.0 eno1: renamed from eth0 [ 4.665869] iTCO_vendor_support: vendor-support=0 [ 4.672654] at24 0-0050: supply vcc not found, using dummy regulator [ 4.673213] at24 0-0050: 256 byte spd EEPROM, read-only [ 4.673236] at24 0-0051: supply vcc not found, using dummy regulator [ 4.673762] at24 0-0051: 256 byte spd EEPROM, read-only [ 4.673783] at24 0-0052: supply vcc not found, using dummy regulator [ 4.674303] at24 0-0052: 256 byte spd EEPROM, read-only [ 4.674321] at24 0-0053: supply vcc not found, using dummy regulator [ 4.674834] at24 0-0053: 256 byte spd EEPROM, read-only [ 4.675744] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0 [ 4.679683] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 4.679766] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 4.683380] intel_rapl_common: Found RAPL domain package [ 4.683384] intel_rapl_common: Found RAPL domain core [ 4.683386] intel_rapl_common: Found RAPL domain dram [ 4.683392] intel_rapl_common: package-0:package:long_term locked by BIOS [ 4.683394] intel_rapl_common: package-0:package:short_term locked by BIOS [ 4.724202] spi-nor spi0.0: mx25l6405d (8192 Kbytes) [ 4.732535] Creating 1 MTD partitions on "intel-spi": [ 4.732539] 0x000000000000-0x000000c00000 : "BIOS" [ 4.732540] mtd: partition "BIOS" extends beyond the end of device "intel-spi" -- size truncated to 0x800000 [ 4.733321] spi-nor spi0.1: mx25l3205d (4096 Kbytes) [ 4.959291] EXT4-fs (sda9): mounted filesystem HASH_952-792C-B930-C08D-17B2B8FCEA81 r/w with ordered data mode. Quota mode: none. [ 5.105870] nvidia: loading out-of-tree module taints kernel. [ 5.105878] nvidia: module license 'NVIDIA' taints kernel. [ 5.105879] Disabling lock debugging due to kernel taint [ 5.105881] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 5.105881] nvidia: module license taints kernel. [ 5.361026] FAT-fs (sda6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 5.361198] nvidia-nvlink: Nvlink Core is being initialized, major device number 239 [ 5.361202] [ 5.362014] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem [ 5.539731] dbus-broker-lau[803]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 5.574244] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 545.29.06 Thu Nov 16 01:59:08 UTC 2023 [ 5.815312] nvidia_modeset: no symbol version for nvidia_register_module [ 5.827226] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 545.29.06 Thu Nov 16 01:47:29 UTC 2023 [ 6.004378] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 6.004382] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0 [ 6.131718] NET: Registered PF_PACKET protocol family [ 9.038417] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.429932] rfkill: input handler disabled [ 25.768930] rfkill: input handler enabled [ 28.013791] rfkill: input handler disabled [ 456.198887] Non-volatile memory driver v1.3 [ 456.312538] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 456.554524] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 456.554548] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 457.994158] warning: `hwinfo' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [11094.900925] rfkill: input handler enabled [11095.357139] EXT4-fs (sda9): unmounting filesystem HASH_952-792C-B930-C08D-17B2B8FCEA81. [11095.388299] zram0: detected capacity change from 16777216 to 0