[ 0.000000] Linux version 5.15.0-78-generic (XXX@XXX) (gcc (Ubuntu 11.3.0-1ubuntu1~22.04.1) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #85-Ubuntu SMP Fri Jul 7 15:25:09 UTC 2023 (Ubuntu 5.15.0-78.85-generic 5.15.99) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-78-generic root=UUID=HASH_FA2-DD50-B780-37D1-03C18366BD45 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009e7ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009e80000-0x000000000a000fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a001000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20f000-0x00000000c73dafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c73db000-0x00000000c7559fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c755a000-0x00000000c75bdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c75be000-0x00000000c8cbafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c8cbb000-0x00000000cabfefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cabff000-0x00000000cbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cc000000-0x00000000cdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc4000-0x00000000fedc9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedcc000-0x00000000fedcefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd5000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000040e2fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000040e300000-0x000000042fffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xc325d018-0xc326a857] usable ==> usable [ 0.000000] e820: update [mem 0xc325d018-0xc326a857] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009e7ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000009e80000-0x000000000a000fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000a001000-0x000000000a1fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000000a20f000-0x00000000c325d017] usable [ 0.000000] reserve setup_data: [mem 0x00000000c325d018-0x00000000c326a857] usable [ 0.000000] reserve setup_data: [mem 0x00000000c326a858-0x00000000c73dafff] usable [ 0.000000] reserve setup_data: [mem 0x00000000c73db000-0x00000000c7559fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c755a000-0x00000000c75bdfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000c75be000-0x00000000c8cbafff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000c8cbb000-0x00000000cabfefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cabff000-0x00000000cbffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000cc000000-0x00000000cdffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000cf000000-0x00000000cfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fdffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedc4000-0x00000000fedc9fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedcc000-0x00000000fedcefff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fedd5000-0x00000000fedd5fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000040e2fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000040e300000-0x000000042fffffff] reserved [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI=0xc75bd000 ACPI 2.0=0xc75bd014 TPMFinalLog=0xc7c6e000 SMBIOS=0xca9c2000 SMBIOS 3.0=0xca9c1000 MEMATTR=0xc5842018 ESRT=0xc5cca898 MOKvar=0xcaa2a000 RNG=0xc756d018 TPMEventLog=0xc326b018 [ 0.000000] random: crng init done [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.3.0 present. [ 0.000000] DMI: HP HP Pavilion All-in-One Desktop 24-ca0xxx/8924, BIOS F.06 04/19/2022 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1796.642 MHz processor [ 0.000132] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000134] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000144] last_pfn = 0x40e300 max_arch_pfn = 0x400000000 [ 0.000365] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000633] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved [ 0.000642] last_pfn = 0xcc000 max_arch_pfn = 0x400000000 [ 0.004633] esrt: Reserving ESRT space from 0x00000000c5cca898 to 0x00000000c5cca8d0. [ 0.004639] e820: update [mem 0xc5cca000-0xc5ccafff] usable ==> reserved [ 0.004664] Using GB pages for direct mapping [ 0.005156] secureboot: Secure boot enabled [ 0.005157] RAMDISK: [mem 0x53ab4000-0x5bc6cfff] ACPI: Early table checksum verification disabled [ 0.005165] ACPI: RSDP 0x00000000C75BD014 000024 (v02 HPQOEM) [ 0.005169] ACPI: XSDT 0x00000000C75BC728 0000FC (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.005174] ACPI: FACP 0x00000000C75AC000 000114 (v06 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.005178] ACPI: DSDT 0x00000000C759B000 010227 (v02 HPQOEM SLIC-CPC 01072009 INTL 20200717) [ 0.005181] ACPI: FACS 0x00000000C7C6C000 000040 [ 0.005184] ACPI: MSDM 0x00000000C75BB000 000055 (v03 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.005186] ACPI: SSDT 0x00000000C75BA000 000060 (v01 HPQOEM SLIC-CPC 00000001 INTL 20200717) [ 0.005189] ACPI: SSDT 0x00000000C75B2000 0072B0 (v02 AMD AmdTable 00000002 MSFT 04000000) [ 0.005192] ACPI: IVRS 0x00000000C75B1000 0001A4 (v02 AMD AmdTable 00000001 AMD 00000000) [ 0.005194] ACPI: SSDT 0x00000000C75AD000 003A21 (v01 AMD AMD AOD 00000001 INTL 20200717) [ 0.005197] ACPI: FIDT 0x00000000C759A000 00009C (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.005200] ACPI: MCFG 0x00000000C7599000 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00010013) [ 0.005202] ACPI: HPET 0x00000000C7598000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00000005) [ 0.005205] ACPI: VFCT 0x00000000C758A000 00D884 (v01 HPQOEM SLIC-CPC 00000001 AMD 31504F47) [ 0.005208] ACPI: BGRT 0x00000000C7589000 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.005210] ACPI: TPM2 0x00000000C7588000 00004C (v04 HPQOEM SLIC-CPC 00000001 AMI 00000000) [ 0.005213] ACPI: SSDT 0x00000000C7582000 005354 (v02 AMD AmdTable 00000001 AMD 00000001) [ 0.005215] ACPI: CRAT 0x00000000C7581000 000F28 (v01 AMD AmdTable 00000001 AMD 00000001) [ 0.005218] ACPI: CDIT 0x00000000C7580000 000029 (v01 AMD AmdTable 00000001 AMD 00000001) [ 0.005221] ACPI: SSDT 0x00000000C757F000 000149 (v01 AMD AmdTable 00000001 INTL 20200717) [ 0.005223] ACPI: SSDT 0x00000000C757E000 00078E (v01 AMD AmdTable 00000001 INTL 20200717) [ 0.005226] ACPI: SSDT 0x00000000C757D000 000641 (v01 AMD AmdTable 00000001 INTL 20200717) [ 0.005228] ACPI: SSDT 0x00000000C757B000 00148E (v01 AMD AmdTable 00000001 INTL 20200717) [ 0.005231] ACPI: SSDT 0x00000000C7579000 00151E (v01 AMD AmdTable 00000001 INTL 20200717) [ 0.005234] ACPI: SSDT 0x00000000C7575000 0036E9 (v01 AMD AmdTable 00000001 INTL 20200717) [ 0.005236] ACPI: WSMT 0x00000000C7574000 000028 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.005239] ACPI: APIC 0x00000000C7573000 0000DE (v04 HPQOEM SLIC-CPC 01072009 AMI 00010013) [ 0.005241] ACPI: SSDT 0x00000000C7572000 00008D (v01 AMD AmdTable 00000001 INTL 20200717) [ 0.005244] ACPI: SSDT 0x00000000C7571000 0008F0 (v01 AMD AmdTable 00000001 INTL 20200717) [ 0.005247] ACPI: SSDT 0x00000000C756F000 00106C (v01 AMD AmdTable 00000001 INTL 20200717) [ 0.005249] ACPI: FPDT 0x00000000C756E000 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI 01000013) [ 0.005251] ACPI: Reserving FACP table memory at [mem 0xc75ac000-0xc75ac113] ACPI: Reserving DSDT table memory at [mem 0xc759b000-0xc75ab226] ACPI: Reserving FACS table memory at [mem 0xc7c6c000-0xc7c6c03f] ACPI: Reserving MSDM table memory at [mem 0xc75bb000-0xc75bb054] ACPI: Reserving SSDT table memory at [mem 0xc75ba000-0xc75ba05f] ACPI: Reserving SSDT table memory at [mem 0xc75b2000-0xc75b92af] ACPI: Reserving IVRS table memory at [mem 0xc75b1000-0xc75b11a3] ACPI: Reserving SSDT table memory at [mem 0xc75ad000-0xc75b0a20] ACPI: Reserving FIDT table memory at [mem 0xc759a000-0xc759a09b] ACPI: Reserving MCFG table memory at [mem 0xc7599000-0xc759903b] ACPI: Reserving HPET table memory at [mem 0xc7598000-0xc7598037] ACPI: Reserving VFCT table memory at [mem 0xc758a000-0xc7597883] ACPI: Reserving BGRT table memory at [mem 0xc7589000-0xc7589037] ACPI: Reserving TPM2 table memory at [mem 0xc7588000-0xc758804b] ACPI: Reserving SSDT table memory at [mem 0xc7582000-0xc7587353] ACPI: Reserving CRAT table memory at [mem 0xc7581000-0xc7581f27] ACPI: Reserving CDIT table memory at [mem 0xc7580000-0xc7580028] ACPI: Reserving SSDT table memory at [mem 0xc757f000-0xc757f148] ACPI: Reserving SSDT table memory at [mem 0xc757e000-0xc757e78d] ACPI: Reserving SSDT table memory at [mem 0xc757d000-0xc757d640] ACPI: Reserving SSDT table memory at [mem 0xc757b000-0xc757c48d] ACPI: Reserving SSDT table memory at [mem 0xc7579000-0xc757a51d] ACPI: Reserving SSDT table memory at [mem 0xc7575000-0xc75786e8] ACPI: Reserving WSMT table memory at [mem 0xc7574000-0xc7574027] ACPI: Reserving APIC table memory at [mem 0xc7573000-0xc75730dd] ACPI: Reserving SSDT table memory at [mem 0xc7572000-0xc757208c] ACPI: Reserving SSDT table memory at [mem 0xc7571000-0xc75718ef] ACPI: Reserving SSDT table memory at [mem 0xc756f000-0xc757006b] ACPI: Reserving FPDT table memory at [mem 0xc756e000-0xc756e043] No NUMA configuration found [ 0.005420] Faking a node at [mem 0x0000000000000000-0x000000040e2fffff] NODE_DATA(0) allocated [mem 0x40e2d6000-0x40e2fffff] Zone ranges: [ 0.005698] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000040e2fffff] Device empty [ 0.005703] Movable zone start for each node [ 0.005705] Early memory node ranges [ 0.005706] node 0: [mem 0x0000000000001000-0x000000000009ffff] node 0: [mem 0x0000000000100000-0x0000000009e7ffff] node 0: [mem 0x000000000a001000-0x000000000a1fffff] node 0: [mem 0x000000000a20f000-0x00000000c73dafff] node 0: [mem 0x00000000cabff000-0x00000000cbffffff] node 0: [mem 0x0000000100000000-0x000000040e2fffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000040e2fffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.005739] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.005942] On node 0, zone DMA32: 385 pages in unavailable ranges [ 0.012009] On node 0, zone DMA32: 15 pages in unavailable ranges [ 0.012203] On node 0, zone DMA32: 14372 pages in unavailable ranges [ 0.037708] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.037794] On node 0, zone Normal: 7424 pages in unavailable ranges [ 0.038021] ACPI: PM-Timer IO Port: 0x808 [ 0.038030] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.038043] IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23 [ 0.038048] IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55 [ 0.038049] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.038051] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.038054] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.038055] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.038065] e820: update [mem 0xc3f49000-0xc3f65fff] usable ==> reserved [ 0.038078] smpboot: Allowing 16 CPUs, 0 hotplug CPUs [ 0.038105] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x09e80000-0x0a000fff] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20efff] PM: hibernation: Registered nosave memory: [mem 0xc325d000-0xc325dfff] PM: hibernation: Registered nosave memory: [mem 0xc326a000-0xc326afff] PM: hibernation: Registered nosave memory: [mem 0xc3f49000-0xc3f65fff] PM: hibernation: Registered nosave memory: [mem 0xc5cca000-0xc5ccafff] PM: hibernation: Registered nosave memory: [mem 0xc73db000-0xc7559fff] PM: hibernation: Registered nosave memory: [mem 0xc755a000-0xc75bdfff] PM: hibernation: Registered nosave memory: [mem 0xc75be000-0xc8cbafff] PM: hibernation: Registered nosave memory: [mem 0xc8cbb000-0xcabfefff] PM: hibernation: Registered nosave memory: [mem 0xcc000000-0xcdffffff] PM: hibernation: Registered nosave memory: [mem 0xce000000-0xceffffff] PM: hibernation: Registered nosave memory: [mem 0xcf000000-0xcfffffff] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xefffffff] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfcffffff] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfeb7ffff] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc3fff] PM: hibernation: Registered nosave memory: [mem 0xfedc4000-0xfedc9fff] PM: hibernation: Registered nosave memory: [mem 0xfedca000-0xfedcbfff] PM: hibernation: Registered nosave memory: [mem 0xfedcc000-0xfedcefff] PM: hibernation: Registered nosave memory: [mem 0xfedcf000-0xfedd4fff] PM: hibernation: Registered nosave memory: [mem 0xfedd5000-0xfedd5fff] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0xd0000000-0xefffffff] available for PCI devices [ 0.038140] Booting paravirtualized kernel on bare hardware [ 0.038143] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.038151] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.038849] percpu: Embedded 60 pages/cpu s208896 r8192 d28672 u262144 [ 0.038858] pcpu-alloc: s208896 r8192 d28672 u262144 alloc=1*2097152 [ 0.038860] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.038898] Built 1 zonelists, mobility grouping on. Total pages: 3961510 [ 0.038899] Policy zone: Normal [ 0.038901] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-78-generic root=UUID=HASH_FA2-DD50-B780-37D1-03C18366BD45 ro quiet splash [ 0.038957] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-5.15.0-78-generic", will be passed to user space. [ 0.040702] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.041571] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.041633] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.083667] Memory: 15481224K/16098220K available (16393K kernel code, 4383K rwdata, 10844K rodata, 3248K init, 18832K bss, 616736K reserved, 0K cma-reserved) [ 0.083785] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.083799] ftrace: allocating 50600 entries in 198 pages [ 0.104900] ftrace: allocated 198 pages with 4 groups [ 0.105019] rcu: Hierarchical RCU implementation. [ 0.105019] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.105021] Rude variant of Tasks RCU enabled. [ 0.105021] Tracing variant of Tasks RCU enabled. [ 0.105022] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.105023] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.107766] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16 [ 0.108012] Console: colour dummy device 80x25 [ 0.108025] printk: console [tty0] enabled [ 0.108042] ACPI: Core revision 20210730 [ 0.108208] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.108226] APIC: Switch to symmetric I/O mode setup [ 0.108894] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160 [ 0.108896] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160 [ 0.108897] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160 [ 0.108898] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160 [ 0.109154] Switched APIC routing to physical flat. [ 0.109774] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.128233] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19e5c57ada2, max_idle_ns: 440795255642 ns [ 0.128241] Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.28 BogoMIPS (lpj=7186568) [ 0.128244] pid_max: default: 32768 minimum: 301 [ 0.130313] LSM: Security Framework initializing [ 0.130326] landlock: Up and running. [ 0.130327] Yama: becoming mindful. [ 0.130361] AppArmor: AppArmor initialized [ 0.130444] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.130489] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.130766] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.130823] LVT offset 1 assigned for vector 0xf9 [ 0.130929] LVT offset 2 assigned for vector 0xf4 [ 0.130954] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.130955] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0 [ 0.130961] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.130963] Spectre V2 : Mitigation: Retpolines [ 0.130963] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.130964] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.130965] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.130965] RETBleed: Mitigation: untrained return thunk [ 0.130967] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.130968] Spectre V2 : Selecting STIBP always-on mode to complement retbleed mitigation [ 0.130968] Spectre V2 : User space: Mitigation: STIBP always-on protection [ 0.130969] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.141079] Freeing SMP alternatives memory: 44K [ 0.252473] smpboot: CPU0: AMD Ryzen 7 5700U with Radeon Graphics (family: 0x17, model: 0x68, stepping: 0x1) [ 0.252604] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.252610] ... version: 0 [ 0.252611] ... bit width: 48 [ 0.252611] ... generic registers: 6 [ 0.252612] ... value mask: 0000ffffffffffff [ 0.252612] ... max period: 00007fffffffffff [ 0.252613] ... fixed-purpose events: 0 [ 0.252613] ... event mask: 000000000000003f [ 0.252672] rcu: Hierarchical SRCU implementation. [ 0.253074] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.253192] smp: Bringing up secondary CPUs ... [ 0.253271] x86: Booting SMP configuration: [ 0.253272] .... node #0, CPUs: #1 [ 0.255676] Spectre V2 : Update user space SMT mitigation: STIBP always-on [ 0.255676] #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 [ 0.288285] smp: Brought up 1 node, 16 CPUs [ 0.288285] smpboot: Max logical packages: 1 [ 0.288285] smpboot: Total of 16 processors activated (57492.54 BogoMIPS) [ 0.289497] devtmpfs: initialized [ 0.289497] x86/mm: Memory block size: 128MB [ 0.289497] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20efff] (61440 bytes) [ 0.289497] ACPI: PM: Registering ACPI NVS region [mem 0xc75be000-0xc8cbafff] (24104960 bytes) [ 0.289497] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289497] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.289497] pinctrl core: initialized pinctrl subsystem [ 0.289497] PM: RTC time: 06:37:10, date: 2023-07-28 [ 0.289497] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.289497] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.289497] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.289497] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292348] thermal_sys: Registered thermal governor 'fair_share' [ 0.292350] thermal_sys: Registered thermal governor 'bang_bang' [ 0.292350] thermal_sys: Registered thermal governor 'step_wise' [ 0.292351] thermal_sys: Registered thermal governor 'user_space' [ 0.292352] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292357] EISA bus registered [ 0.292367] cpuidle: using governor ladder [ 0.292369] cpuidle: using governor menu [ 0.292395] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.292395] ACPI: bus type PCI registered [ 0.292395] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.292395] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.292395] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.292395] PCI: Using configuration type 1 for base access [ 0.293617] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.293621] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.293621] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.296292] ACPI: Added _OSI(Module Device) [ 0.296293] ACPI: Added _OSI(Processor Device) [ 0.296294] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.296294] ACPI: Added _OSI(Processor Aggregator Device) [ 0.296295] ACPI: Added _OSI(Linux-Dell-Video) [ 0.296296] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.296296] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.310360] ACPI: 14 ACPI AML tables successfully acquired and loaded [ 0.311745] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.313448] ACPI: EC: EC started [ 0.313449] ACPI: EC: interrupt blocked [ 0.313477] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.313479] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions [ 0.313480] ACPI: Interpreter enabled [ 0.313491] ACPI: PM: (supports S0 S3 S4 S5) [ 0.313492] ACPI: Using IOAPIC for interrupt routing [ 0.313680] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.313681] PCI: Using E820 reservations for host bridge windows [ 0.313914] ACPI: Enabled 6 GPEs in block 00 to 1F [ 0.315555] ACPI: PM: Power Resource [PRBT] ACPI: PM: Power Resource [P0SA] ACPI: PM: Power Resource [P0SA] ACPI: PM: Power Resource [PRWL] ACPI: PM: Power Resource [PRWB] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.319351] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.319617] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge [ 0.319910] PCI host bridge to bus 0000:00 [ 0.319912] pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 [ 0.320093] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 [ 0.320217] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 [ 0.320332] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 [ 0.320432] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 [ 0.320453] pci 0000:00:02.1: enabling Extended Tags [ 0.320481] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold [ 0.320584] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400 [ 0.320605] pci 0000:00:02.2: enabling Extended Tags [ 0.320632] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.320740] pci 0000:00:02.4: [1022:1634] type 01 class 0x060400 [ 0.320761] pci 0000:00:02.4: enabling Extended Tags [ 0.320788] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold [ 0.320894] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 [ 0.320995] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 [ 0.321014] pci 0000:00:08.1: enabling Extended Tags [ 0.321043] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.321153] pci 0000:00:08.2: [1022:1635] type 01 class 0x060400 [ 0.321172] pci 0000:00:08.2: enabling Extended Tags [ 0.321201] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.321327] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.321476] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.321629] pci 0000:00:18.0: [1022:1448] type 00 class 0x060000 [ 0.321707] pci 0000:00:18.1: [1022:1449] type 00 class 0x060000 [ 0.321786] pci 0000:00:18.2: [1022:144a] type 00 class 0x060000 [ 0.321866] pci 0000:00:18.3: [1022:144b] type 00 class 0x060000 [ 0.321948] pci 0000:00:18.4: [1022:144c] type 00 class 0x060000 [ 0.322027] pci 0000:00:18.5: [1022:144d] type 00 class 0x060000 [ 0.322107] pci 0000:00:18.6: [1022:144e] type 00 class 0x060000 [ 0.322185] pci 0000:00:18.7: [1022:144f] type 00 class 0x060000 [ 0.322286] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.322303] pci 0000:01:00.0: reg 0x10: [io 0xf000-0xf0ff] pci 0000:01:00.0: reg 0x18: [mem 0xfcf04000-0xfcf04fff 64bit] pci 0000:01:00.0: reg 0x20: [mem 0xfcf00000-0xfcf03fff 64bit] pci 0000:01:00.0: supports D1 D2 [ 0.322425] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.322543] pci 0000:00:02.1: PCI bridge to [bus 01] pci 0000:00:02.1: bridge window [io 0xf000-0xffff] pci 0000:00:02.1: bridge window [mem 0xfcf00000-0xfcffffff] pci 0000:02:00.0: [10ec:8852] type 00 class 0x028000 [ 0.322630] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] pci 0000:02:00.0: reg 0x18: [mem 0xfce00000-0xfcefffff 64bit] pci 0000:02:00.0: supports D1 D2 [ 0.322766] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.322950] pci 0000:00:02.2: PCI bridge to [bus 02] pci 0000:00:02.2: bridge window [io 0xe000-0xefff] pci 0000:00:02.2: bridge window [mem 0xfce00000-0xfcefffff] pci 0000:03:00.0: [144d:a809] type 00 class 0x010802 [ 0.323034] pci 0000:03:00.0: reg 0x10: [mem 0xfcd00000-0xfcd03fff 64bit] pci 0000:00:02.4: PCI bridge to [bus 03] pci 0000:00:02.4: bridge window [mem 0xfcd00000-0xfcdfffff] pci 0000:04:00.0: [1002:164c] type 00 class 0x030000 [ 0.323294] pci 0000:04:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:04:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref] pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd0ff] pci 0000:04:00.0: reg 0x24: [mem 0xfcb00000-0xfcb7ffff] pci 0000:04:00.0: enabling Extended Tags [ 0.323328] pci 0000:04:00.0: BAR 0: assigned to efifb [ 0.323365] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.323398] pci 0000:04:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.323459] pci 0000:04:00.1: [1002:1637] type 00 class 0x040300 [ 0.323466] pci 0000:04:00.1: reg 0x10: [mem 0xfcb88000-0xfcb8bfff] pci 0000:04:00.1: enabling Extended Tags [ 0.323513] pci 0000:04:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.323576] pci 0000:04:00.2: [1022:15df] type 00 class 0x108000 [ 0.323589] pci 0000:04:00.2: reg 0x18: [mem 0xfca00000-0xfcafffff] pci 0000:04:00.2: reg 0x24: [mem 0xfcb8c000-0xfcb8dfff] pci 0000:04:00.2: enabling Extended Tags [ 0.323694] pci 0000:04:00.3: [1022:1639] type 00 class 0x0c0330 [ 0.323704] pci 0000:04:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit] pci 0000:04:00.3: enabling Extended Tags [ 0.323756] pci 0000:04:00.3: PME# supported from D0 D3hot D3cold [ 0.323821] pci 0000:04:00.4: [1022:1639] type 00 class 0x0c0330 [ 0.323831] pci 0000:04:00.4: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit] pci 0000:04:00.4: enabling Extended Tags [ 0.323883] pci 0000:04:00.4: PME# supported from D0 D3hot D3cold [ 0.323949] pci 0000:04:00.6: [1022:15e3] type 00 class 0x040300 [ 0.323956] pci 0000:04:00.6: reg 0x10: [mem 0xfcb80000-0xfcb87fff] pci 0000:04:00.6: enabling Extended Tags [ 0.324002] pci 0000:04:00.6: PME# supported from D0 D3hot D3cold [ 0.324059] pci 0000:00:08.1: PCI bridge to [bus 04] pci 0000:00:08.1: bridge window [io 0xd000-0xdfff] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] pci 0000:05:00.0: [1022:7901] type 00 class 0x010601 [ 0.324134] pci 0000:05:00.0: reg 0x24: [mem 0xfcc01000-0xfcc017ff] pci 0000:05:00.0: enabling Extended Tags [ 0.324206] pci 0000:05:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.2 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link) [ 0.324250] pci 0000:05:00.1: [1022:7901] type 00 class 0x010601 [ 0.324277] pci 0000:05:00.1: reg 0x24: [mem 0xfcc00000-0xfcc007ff] pci 0000:05:00.1: enabling Extended Tags [ 0.324364] pci 0000:00:08.2: PCI bridge to [bus 05] pci 0000:00:08.2: bridge window [mem 0xfcc00000-0xfccfffff] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.324862] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.324897] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.324940] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.324978] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.325010] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.325042] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.325074] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.325657] ACPI: EC: interrupt unblocked [ 0.325658] ACPI: EC: event unblocked [ 0.325667] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.325668] ACPI: EC: GPE=0x3 [ 0.325669] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete [ 0.325670] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events [ 0.325716] iommu: Default domain type: Translated [ 0.325716] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.325716] SCSI subsystem initialized [ 0.325716] libata version 3.00 loaded. [ 0.325716] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.325716] pci 0000:04:00.0: vgaarb: bridge control possible [ 0.325716] pci 0000:04:00.0: vgaarb: setting as boot device [ 0.325716] vgaarb: loaded [ 0.325716] ACPI: bus type USB registered [ 0.325716] usbcore: registered new interface driver usbfs [ 0.325716] usbcore: registered new interface driver hub [ 0.325716] usbcore: registered new device driver usb [ 0.325716] pps_core: LinuxPPS API ver. 1 registered [ 0.325716] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.325716] PTP clock support registered [ 0.325716] EDAC MC: Ver: 3.0.0 [ 0.325716] Registered efivars operations [ 0.325716] NetLabel: Initializing [ 0.325716] NetLabel: domain hash size = 128 [ 0.325716] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.325716] NetLabel: unlabeled traffic allowed by default [ 0.325716] PCI: Using ACPI for IRQ routing [ 0.330776] PCI: pci_cache_line_size set to 64 bytes [ 0.330836] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.330838] e820: reserve RAM buffer [mem 0x09e80000-0x0bffffff] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] e820: reserve RAM buffer [mem 0xc325d018-0xc3ffffff] e820: reserve RAM buffer [mem 0xc3f49000-0xc3ffffff] e820: reserve RAM buffer [mem 0xc5cca000-0xc7ffffff] e820: reserve RAM buffer [mem 0xc73db000-0xc7ffffff] e820: reserve RAM buffer [mem 0x40e300000-0x40fffffff] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.330846] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.332581] clocksource: Switched to clocksource tsc-early [ 0.339124] VFS: Disk quotas dquot_6.6.0 [ 0.339138] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.339250] AppArmor: AppArmor Filesystem Enabled [ 0.339286] pnp: PnP ACPI init [ 0.339413] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.339666] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.339668] system 00:02: [io 0x040b] has been reserved [ 0.339669] system 00:02: [io 0x04d6] has been reserved [ 0.339670] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.339670] system 00:02: [io 0x0c14] has been reserved [ 0.339671] system 00:02: [io 0x0c50-0x0c51] has been reserved [ 0.339672] system 00:02: [io 0x0c52] has been reserved [ 0.339673] system 00:02: [io 0x0c6c] has been reserved [ 0.339674] system 00:02: [io 0x0c6f] has been reserved [ 0.339675] system 00:02: [io 0x0cd8-0x0cdf] has been reserved [ 0.339676] system 00:02: [io 0x0800-0x089f] has been reserved [ 0.339677] system 00:02: [io 0x0b00-0x0b0f] has been reserved [ 0.339678] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.339679] system 00:02: [io 0x0900-0x090f] has been reserved [ 0.339679] system 00:02: [io 0x0910-0x091f] has been reserved [ 0.339681] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.339682] system 00:02: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.339683] system 00:02: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.339684] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.339685] system 00:02: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.339686] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.339687] system 00:02: [mem 0xff000000-0xffffffff] has been reserved [ 0.340268] pnp: PnP ACPI: found 4 devices [ 0.347766] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.347876] NET: Registered PF_INET protocol family [ 0.348106] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.350059] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.350086] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.350169] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.350346] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.350409] TCP: Hash tables configured (established 131072 bind 65536) [ 0.350500] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.350542] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.350580] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.350638] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.350644] NET: Registered PF_XDP protocol family [ 0.350660] pci 0000:00:02.1: PCI bridge to [bus 01] pci 0000:00:02.1: bridge window [io 0xf000-0xffff] pci 0000:00:02.1: bridge window [mem 0xfcf00000-0xfcffffff] pci 0000:00:02.2: PCI bridge to [bus 02] pci 0000:00:02.2: bridge window [io 0xe000-0xefff] pci 0000:00:02.2: bridge window [mem 0xfce00000-0xfcefffff] pci 0000:00:02.4: PCI bridge to [bus 03] pci 0000:00:02.4: bridge window [mem 0xfcd00000-0xfcdfffff] pci 0000:00:08.1: PCI bridge to [bus 04] pci 0000:00:08.1: bridge window [io 0xd000-0xdfff] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff] pci 0000:00:08.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref] pci 0000:00:08.2: PCI bridge to [bus 05] pci 0000:00:08.2: bridge window [mem 0xfcc00000-0xfccfffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff window] pci_bus 0000:00: resource 8 [mem 0xfee00000-0xffffffff window] pci_bus 0000:01: resource 0 [io 0xf000-0xffff] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xfce00000-0xfcefffff] pci_bus 0000:03: resource 1 [mem 0xfcd00000-0xfcdfffff] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] pci_bus 0000:04: resource 1 [mem 0xfc800000-0xfcbfffff] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref] pci_bus 0000:05: resource 1 [mem 0xfcc00000-0xfccfffff] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0 [ 0.350850] pci 0000:04:00.3: extending delay after power-on from D3hot to 20 msec [ 0.351030] pci 0000:04:00.4: extending delay after power-on from D3hot to 20 msec [ 0.351083] PCI: CLS 64 bytes, default 64 [ 0.351095] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.351126] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.351127] pci 0000:00:00.2: PCI INT A: not connected [ 0.351140] pci 0000:00:01.0: Adding to iommu group 0 [ 0.351150] pci 0000:00:02.0: Adding to iommu group 1 [ 0.351157] pci 0000:00:02.1: Adding to iommu group 2 [ 0.351164] pci 0000:00:02.2: Adding to iommu group 3 [ 0.351183] Trying to unpack rootfs image as initramfs... [ 0.351186] pci 0000:00:02.4: Adding to iommu group 4 [ 0.351198] pci 0000:00:08.0: Adding to iommu group 5 [ 0.351206] pci 0000:00:08.1: Adding to iommu group 6 [ 0.351214] pci 0000:00:08.2: Adding to iommu group 7 [ 0.351225] pci 0000:00:14.0: Adding to iommu group 8 [ 0.351230] pci 0000:00:14.3: Adding to iommu group 8 [ 0.351248] pci 0000:00:18.0: Adding to iommu group 9 [ 0.351254] pci 0000:00:18.1: Adding to iommu group 9 [ 0.351259] pci 0000:00:18.2: Adding to iommu group 9 [ 0.351265] pci 0000:00:18.3: Adding to iommu group 9 [ 0.351269] pci 0000:00:18.4: Adding to iommu group 9 [ 0.351274] pci 0000:00:18.5: Adding to iommu group 9 [ 0.351279] pci 0000:00:18.6: Adding to iommu group 9 [ 0.351284] pci 0000:00:18.7: Adding to iommu group 9 [ 0.351291] pci 0000:01:00.0: Adding to iommu group 10 [ 0.351299] pci 0000:02:00.0: Adding to iommu group 11 [ 0.351305] pci 0000:03:00.0: Adding to iommu group 12 [ 0.351323] pci 0000:04:00.0: Adding to iommu group 13 [ 0.351330] pci 0000:04:00.1: Adding to iommu group 14 [ 0.351337] pci 0000:04:00.2: Adding to iommu group 15 [ 0.351345] pci 0000:04:00.3: Adding to iommu group 16 [ 0.351352] pci 0000:04:00.4: Adding to iommu group 17 [ 0.351360] pci 0000:04:00.6: Adding to iommu group 18 [ 0.351368] pci 0000:05:00.0: Adding to iommu group 19 [ 0.351375] pci 0000:05:00.1: Adding to iommu group 20 [ 0.353718] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.353722] AMD-Vi: Extended features (0x206d73ef22254ade): PPR X2APIC NX GT IA GA PC GA_vAPIC [ 0.353726] AMD-Vi: Interrupt remapping enabled [ 0.353727] AMD-Vi: Virtual APIC enabled [ 0.353727] AMD-Vi: X2APIC enabled [ 0.451004] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.451007] software IO TLB: mapped [mem 0x00000000bf25b000-0x00000000c325b000] (64MB) [ 0.451062] LVT offset 0 assigned for vector 0x400 [ 0.451431] perf: AMD IBS detected (0x000003ff) [ 0.451439] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.452210] Initialise system trusted keyrings [ 0.452222] Key type blacklist registered [ 0.452295] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 0.453237] zbud: loaded [ 0.453418] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.453540] fuse: init (API version 7.34) [ 0.453719] integrity: Platform Keyring initialized [ 0.456030] Key type asymmetric registered [ 0.456032] Asymmetric key parser 'x509' registered [ 0.456052] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.456094] io scheduler mq-deadline registered [ 0.457402] pcieport 0000:00:02.1: PME: Signaling with IRQ 26 [ 0.457488] pcieport 0000:00:02.2: PME: Signaling with IRQ 27 [ 0.457567] pcieport 0000:00:02.4: PME: Signaling with IRQ 28 [ 0.457652] pcieport 0000:00:08.1: PME: Signaling with IRQ 29 [ 0.457816] pcieport 0000:00:08.2: PME: Signaling with IRQ 30 [ 0.457885] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.457986] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.458000] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.458043] ACPI: button: Power Button [PWRF] Monitor-Mwait will be used to enter C-1 state [ 0.458088] ACPI: \_SB_.PLTF.P000: Found 3 idle states [ 0.458152] ACPI: \_SB_.PLTF.P001: Found 3 idle states [ 0.458207] ACPI: \_SB_.PLTF.P002: Found 3 idle states [ 0.458349] ACPI: \_SB_.PLTF.P003: Found 3 idle states [ 0.458510] ACPI: \_SB_.PLTF.P004: Found 3 idle states [ 0.458667] ACPI: \_SB_.PLTF.P005: Found 3 idle states [ 0.458817] ACPI: \_SB_.PLTF.P006: Found 3 idle states [ 0.458965] ACPI: \_SB_.PLTF.P007: Found 3 idle states [ 0.459051] ACPI: \_SB_.PLTF.P008: Found 3 idle states [ 0.459185] ACPI: \_SB_.PLTF.P009: Found 3 idle states [ 0.459306] ACPI: \_SB_.PLTF.P00A: Found 3 idle states [ 0.459439] ACPI: \_SB_.PLTF.P00B: Found 3 idle states [ 0.459576] ACPI: \_SB_.PLTF.P00C: Found 3 idle states [ 0.459709] ACPI: \_SB_.PLTF.P00D: Found 3 idle states [ 0.459848] ACPI: \_SB_.PLTF.P00E: Found 3 idle states [ 0.459982] ACPI: \_SB_.PLTF.P00F: Found 3 idle states [ 0.462290] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.462293] ACPI: thermal: Thermal Zone [HPTZ] (52 C) [ 0.462494] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.463707] Linux agpgart interface v0.103 [ 0.542371] loop: module loaded [ 0.542594] tun: Universal TUN/TAP device driver, 1.6 [ 0.542624] PPP generic driver version 2.4.2 [ 0.542682] VFIO - User Level meta-driver version: 0.3 [ 0.542769] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.542774] ehci-pci: EHCI PCI platform driver [ 0.542780] ehci-platform: EHCI generic platform driver [ 0.542784] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.542786] ohci-pci: OHCI PCI platform driver [ 0.542790] ohci-platform: OHCI generic platform driver [ 0.542793] uhci_hcd: USB Universal Host Controller Interface driver [ 0.542828] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.542830] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.544001] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.544065] mousedev: PS/2 mouse device common for all mice [ 0.544138] rtc_cmos 00:01: RTC can wake from S4 [ 0.544327] rtc_cmos 00:01: registered as rtc0 [ 0.544355] rtc_cmos 00:01: setting system clock to 2023-07-28T06:37:11 UTC (1690526231) [ 0.544376] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.544381] i2c_dev: i2c /dev entries driver [ 0.544395] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.544412] device-mapper: uevent: version 1.0.3 [ 0.544454] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: XXX@XXX [ 0.544464] platform eisa.0: Probing EISA bus 0 [ 0.544465] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.544466] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.544467] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.544468] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.544469] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.544469] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.544470] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.544471] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.544471] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.544472] platform eisa.0: EISA: Detected 0 cards [ 0.544763] ledtrig-cpu: registered to indicate activity on CPUs [ 0.544781] efifb: probing for efifb [ 0.544804] efifb: showing boot graphics [ 0.545974] efifb: framebuffer at 0xd0000000, using 8100k, total 8100k [ 0.545975] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.545976] efifb: scrolling: redraw [ 0.545976] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.546042] fbcon: Deferring console take-over [ 0.546043] fb0: EFI VGA frame buffer device [ 0.546046] EFI Variables Facility v0.08 2004-May-17 [ 0.549474] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.550087] drop_monitor: Initializing network drop monitor service [ 0.550201] NET: Registered PF_INET6 protocol family [ 0.947035] Freeing initrd memory: 132836K [ 0.952388] Segment Routing with IPv6 [ 0.952410] In-situ OAM (IOAM) with IPv6 [ 0.952460] NET: Registered PF_PACKET protocol family [ 0.952596] Key type dns_resolver registered [ 0.953791] microcode: CPU0: patch_level=0x08608103 [ 0.953799] microcode: CPU1: patch_level=0x08608103 [ 0.953821] microcode: CPU2: patch_level=0x08608103 [ 0.953829] microcode: CPU3: patch_level=0x08608103 [ 0.953834] microcode: CPU4: patch_level=0x08608103 [ 0.953839] microcode: CPU5: patch_level=0x08608103 [ 0.953857] microcode: CPU6: patch_level=0x08608103 [ 0.953865] microcode: CPU7: patch_level=0x08608103 [ 0.953886] microcode: CPU8: patch_level=0x08608103 [ 0.953895] microcode: CPU9: patch_level=0x08608103 [ 0.953916] microcode: CPU10: patch_level=0x08608103 [ 0.953924] microcode: CPU11: patch_level=0x08608103 [ 0.953932] microcode: CPU12: patch_level=0x08608103 [ 0.953937] microcode: CPU13: patch_level=0x08608103 [ 0.953955] microcode: CPU14: patch_level=0x08608103 [ 0.953964] microcode: CPU15: patch_level=0x08608103 [ 0.953969] microcode: Microcode Update Driver: v2.2. [ 0.954258] resctrl: L3 allocation detected [ 0.954259] resctrl: MB allocation detected [ 0.954260] resctrl: L3 monitoring detected [ 0.954263] IPI shorthand broadcast: enabled [ 0.954276] sched_clock: Marking stable (953981741, 267971)->(1055545048, -101295336) [ 0.954631] registered taskstats version 1 [ 0.954885] Loading compiled-in X.509 certificates [ 0.955343] Loaded X.509 cert 'Build time autogenerated kernel key: 9d82e5e7ad5edec3b7fd52847c6ba9a5bea7ed9c' [ 0.955672] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 0.955995] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 0.955996] blacklist: Loading compiled-in revocation X.509 certificates [ 0.956006] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.956017] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 0.956027] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 0.956035] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 0.956047] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 0.956056] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 0.956065] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 0.956076] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 0.956522] zswap: loaded using pool lzo/zbud [ 0.957068] Key type .fscrypt registered [ 0.957069] Key type fscrypt-provisioning registered [ 0.957229] Key type trusted registered [ 0.958948] Key type encrypted registered [ 0.958951] AppArmor: AppArmor sha1 policy hashing enabled [ 0.959019] integrity: Loading X.509 certificate: UEFI:db [ 0.959040] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7' [ 0.959040] integrity: Loading X.509 certificate: UEFI:db [ 0.959053] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.959053] integrity: Loading X.509 certificate: UEFI:db [ 0.959064] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.959106] integrity: Revoking X.509 certificate: UEFI:dbx [ 0.959117] blacklist: Revoked X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 0.959117] integrity: Revoking X.509 certificate: UEFI:dbx [ 0.959127] blacklist: Revoked X.509 cert 'Debian Secure Boot Signer: 00a7468def' [ 0.959556] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 0.959731] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' [ 0.959735] Loading compiled-in module X.509 certificates [ 0.960064] Loaded X.509 cert 'Build time autogenerated kernel key: 9d82e5e7ad5edec3b7fd52847c6ba9a5bea7ed9c' [ 0.960065] ima: Allocated hash algorithm: sha1 [ 1.099121] ima: No architecture policies found [ 1.099160] evm: Initialising EVM extended attributes: [ 1.099161] evm: security.selinux [ 1.099164] evm: security.SMACK64 [ 1.099165] evm: security.SMACK64EXEC [ 1.099167] evm: security.SMACK64TRANSMUTE [ 1.099168] evm: security.SMACK64MMAP [ 1.099169] evm: security.apparmor [ 1.099170] evm: security.ima [ 1.099172] evm: security.capability [ 1.099173] evm: HMAC attrs: 0x1 [ 1.099669] PM: Magic number: 15:326:621 [ 1.099727] acpi AMDI0020:01: hash matches [ 1.100183] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.101201] RAS: Correctable Errors collector initialized. [ 1.101206] Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7 [ 1.102186] Freeing unused decrypted memory: 2036K [ 1.102634] Freeing unused kernel image (initmem) memory: 3248K [ 1.119013] Write protecting the kernel read-only data: 30720k [ 1.119774] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.120109] Freeing unused kernel image (rodata/data gap) memory: 1444K [ 1.206183] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.206193] Run /init as init process [ 1.206194] with arguments: [ 1.206195] /init [ 1.206196] splash [ 1.206197] with environment: [ 1.206197] HOME=/ [ 1.206197] TERM=linux [ 1.206198] BOOT_IMAGE=/boot/vmlinuz-5.15.0-78-generic [ 1.307355] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.307361] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.307393] cryptd: max_cpu_qlen set to 1000 [ 1.308320] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.310689] ahci 0000:05:00.0: version 3.0 [ 1.310728] acpi device:15: registered as cooling_device16 [ 1.310771] xhci_hcd 0000:04:00.3: xHCI Host Controller [ 1.310873] xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 1 [ 1.310980] xhci_hcd 0000:04:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410 [ 1.315997] ahci 0000:05:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.316002] ahci 0000:05:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.316182] scsi host0: ahci [ 1.316253] ata1: SATA max UDMA/133 abar m2048@0xfcc01000 port 0xfcc01100 irq 34 [ 1.319729] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:14/LNXVIDEO:00/input/input3 [ 1.322831] xhci_hcd 0000:04:00.3: xHCI Host Controller [ 1.322840] xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 2 [ 1.322845] xhci_hcd 0000:04:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.322875] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.322876] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.322878] usb usb1: Product: xHCI Host Controller [ 1.322879] usb usb1: Manufacturer: Linux 5.15.0-78-generic xhci-hcd [ 1.322880] usb usb1: SerialNumber: ... [ 1.323015] ahci 0000:05:00.1: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.323020] ahci 0000:05:00.1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.323266] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.324684] AVX2 version of gcm_enc/dec engaged. [ 1.324737] AES CTR mode by8 optimization enabled [ 1.325539] hub 1-0:1.0: USB hub found [ 1.325561] hub 1-0:1.0: 4 ports detected [ 1.326580] scsi host1: ahci [ 1.326642] ata2: SATA max UDMA/133 abar m2048@0xfcc00000 port 0xfcc00100 irq 43 [ 1.326768] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.326788] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.326790] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.326791] usb usb2: Product: xHCI Host Controller [ 1.326793] usb usb2: Manufacturer: Linux 5.15.0-78-generic xhci-hcd [ 1.326794] usb usb2: SerialNumber: ... [ 1.328001] hub 2-0:1.0: USB hub found [ 1.328014] hub 2-0:1.0: 2 ports detected [ 1.328331] acpi PNP0C14:01: duplicate WMI GUID HASH_588-CAE0-9FF1-C20E-8ACAF41B3CAC (first instance was on PNP0C14:00) [ 1.328502] xhci_hcd 0000:04:00.4: xHCI Host Controller [ 1.328507] xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 3 [ 1.328597] xhci_hcd 0000:04:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410 [ 1.328948] xhci_hcd 0000:04:00.4: xHCI Host Controller [ 1.328952] xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 4 [ 1.328954] xhci_hcd 0000:04:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 1.328986] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.328988] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.328989] usb usb3: Product: xHCI Host Controller [ 1.328990] usb usb3: Manufacturer: Linux 5.15.0-78-generic xhci-hcd [ 1.328991] usb usb3: SerialNumber: ... [ 1.329114] hub 3-0:1.0: USB hub found [ 1.329126] hub 3-0:1.0: 4 ports detected [ 1.329326] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.329343] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.329345] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.329346] usb usb4: Product: xHCI Host Controller [ 1.329347] usb usb4: Manufacturer: Linux 5.15.0-78-generic xhci-hcd [ 1.329348] usb usb4: SerialNumber: ... [ 1.329462] hub 4-0:1.0: USB hub found [ 1.329472] hub 4-0:1.0: 2 ports detected [ 1.338068] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 999390D7C3CB643179923EC855D07467, XID 541, IRQ 54 [ 1.338073] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] tsc: Refined TSC clocksource calibration: 1810.200 MHz [ 1.484538] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1a17cd1ab01, max_idle_ns: 440795217532 ns [ 1.484589] clocksource: Switched to clocksource tsc [ 1.633223] ata1: SATA link down (SStatus 0 SControl 300) [ 1.664269] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 1.796279] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.796712] ata2.00: ATA-10: WDC WD20SPZX-60UA7T1, 02.01A02, max UDMA/133 [ 1.796862] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.797679] ata2.00: configured for UDMA/133 [ 1.798099] scsi 1:0:0:0: Direct-Access ATA WDC WD20SPZX-60U 1A02 PQ: 0 ANSI: 5 [ 1.799067] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.799304] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 1.799309] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 1.799328] sd 1:0:0:0: [sda] Write Protect is off [ 1.799334] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.799367] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.820064] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32 [ 1.820074] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.820078] usb 3-1: Product: USB2.0 Hub [ 1.870896] hub 3-1:1.0: USB hub found [ 1.871484] hub 3-1:1.0: 4 ports detected [ 1.947926] sda: sda1 sda2 sda3 sda4 sda5 [ 1.972656] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.975425] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 1.976630] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 1.976726] nvme nvme0: pci function 0000:03:00.0 [ 1.991247] nvme nvme0: Shutdown timeout set to 8 seconds [ 2.016503] nvme nvme0: allocated 64 MiB host memory buffer. [ 2.065395] nvme nvme0: 12/0/0 default/read/poll queues [ 2.074567] nvme0n1: p1 p2 p3 p4 [ 2.105905] AMD-Vi: AMD IOMMUv2 loaded and initialized [ 2.152252] clocksource: timekeeping watchdog on CPU3: Marking clocksource 'tsc' as unstable because the skew is too large: [ 2.152259] clocksource: 'hpet' wd_nsec: 515867170 wd_now: 1d41f2b wd_last: 1636a84 mask: ffffffff [ 2.152264] clocksource: 'tsc' cs_nsec: 511998176 cs_now: ba4e80e92 cs_last: b6da9eb76 mask: ffffffffffffffff [ 2.152268] clocksource: 'tsc' is current clocksource. [ 2.152275] tsc: Marking TSC unstable due to clocksource watchdog [ 2.152288] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. [ 2.152290] sched_clock: Marking unstable (2152019406, 268007)<-(2253582673, -101295336) [ 2.152529] clocksource: Checking clocksource tsc synchronization from CPU 0 to CPUs 1,7-11,13. [ 2.211635] clocksource: Switched to clocksource hpet [ 2.238318] [drm] amdgpu kernel modesetting enabled. [ 2.240185] amdgpu: Virtual CRAT table created for CPU [ 2.240195] amdgpu: Topology: Add CPU node [ 2.240284] checking generic (d0000000 7e9000) vs hw (d0000000 10000000) [ 2.240334] amdgpu 0000:04:00.0: enabling device (0106 -> 0107) [ 2.240371] [drm] initializing kernel modesetting (RENOIR 0x1002:0x164C 0x103C:0x8924 0xC1). [ 2.240373] amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled [ 2.240382] [drm] register mmio base: 0xFCB00000 [ 2.240382] [drm] register mmio size: 524288 [ 2.240384] [drm] PCIE atomic ops is not supported [ 2.241463] [drm] add ip block number 0 <soc15_common> [ 2.241464] [drm] add ip block number 1 <gmc_v9_0> [ 2.241465] [drm] add ip block number 2 <vega10_ih> [ 2.241466] [drm] add ip block number 3 <psp> [ 2.241467] [drm] add ip block number 4 <smu> [ 2.241468] [drm] add ip block number 5 <gfx_v9_0> [ 2.241468] [drm] add ip block number 6 <sdma_v4_0> [ 2.241469] [drm] add ip block number 7 <dm> [ 2.241470] [drm] add ip block number 8 <vcn_v2_0> [ 2.241471] [drm] add ip block number 9 <jpeg_v2_0> [ 2.241484] amdgpu 0000:04:00.0: amdgpu: Fetched VBIOS from VFCT [ 2.241486] amdgpu: ATOM BIOS: 113-LUCIENNE-018 [ 2.241517] [drm] VCN decode is enabled in VM mode [ 2.241517] [drm] VCN encode is enabled in VM mode [ 2.241518] [drm] JPEG decode is enabled in VM mode [ 2.241599] amdgpu 0000:04:00.0: vgaarb: deactivate vga console [ 2.241623] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 2.241628] amdgpu 0000:04:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) [ 2.241630] amdgpu 0000:04:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 2.241632] amdgpu 0000:04:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 2.241638] [drm] Detected VRAM RAM=512M, BAR=512M [ 2.241639] [drm] RAM width 128bits DDR4 [ 2.241675] [drm] amdgpu: 512M of VRAM memory ready [ 2.241677] [drm] amdgpu: 3072M of GTT memory ready. [ 2.241681] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.241800] [drm] PCIE GART of 1024M enabled. [ 2.241800] [drm] PTB located at 0x000000F400900000 [ 2.241979] amdgpu 0000:04:00.0: amdgpu: PSP runtime database doesn't exist [ 2.243537] [drm] Loading DMUB firmware via PSP: version=0x0101001F [ 2.243619] [drm] Found VCN firmware Version ENC: 1.16 DEC: 5 VEP: 0 Revision: 3 [ 2.243623] amdgpu 0000:04:00.0: amdgpu: Will use PSP to load VCN firmware [ 2.772729] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 2.772738] fbcon: Taking over console [ 2.946522] [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR [ 3.026315] amdgpu 0000:04:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 3.035866] amdgpu 0000:04:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 3.035870] amdgpu 0000:04:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available [ 3.038136] amdgpu 0000:04:00.0: amdgpu: SMU is initialized successfully! [ 3.039396] [drm] kiq ring mec 2 pipe 1 q 0 [ 3.041290] [drm] Display Core initialized with v3.2.149! [ 3.041728] [drm] DMUB hardware initialized: version=0x0101001F [ 3.175227] [drm] VCN decode and encode initialized successfully(under DPG Mode). [ 3.175252] [drm] JPEG decode initialized successfully. [ 3.177325] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 3.202863] memmap_init_zone_device initialised 131072 pages in 0ms [ 3.202872] amdgpu: HMM registered 512MB device memory [ 3.202911] amdgpu: SRAT table not found [ 3.202912] amdgpu: Virtual CRAT table created for GPU [ 3.203408] amdgpu: Topology: Add dGPU node [0x164c:0x1002] kfd kfd: amdgpu: added device 1002:164c [ 3.203434] amdgpu 0000:04:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 8 [ 3.206359] [drm] fb mappable at 0x410CD3000 [ 3.206362] [drm] vram apper at 0x410000000 [ 3.206362] [drm] size 8294400 [ 3.206363] [drm] fb depth is 24 [ 3.206363] [drm] pitch is 7680 [ 3.206438] fbcon: amdgpudrmfb (fb0) is primary device [ 3.264136] Console: switching to colour frame buffer device 240x67 [ 3.283715] amdgpu 0000:04:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 3.300717] amdgpu 0000:04:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 3.300726] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 3.300729] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 3.300732] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 3.300734] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 3.300737] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 3.300739] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 3.300741] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 3.300744] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 3.300747] amdgpu 0000:04:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 3.300749] amdgpu 0000:04:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [ 3.300752] amdgpu 0000:04:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [ 3.300755] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [ 3.300757] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [ 3.300760] amdgpu 0000:04:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [ 3.302765] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:04:00.0 on minor 0 [ 3.676504] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 3.676693] usb usb3-port2: attempt power cycle [ 3.756390] usb 3-1.1: new high-speed USB device number 5 using xhci_hcd [ 3.858753] usb 3-1.1: New USB device found, idVendor=1a40, idProduct=0201, bcdDevice= 1.00 [ 3.858763] usb 3-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 3.858767] usb 3-1.1: Product: USB 2.0 Hub [MTT] hub 3-1.1:1.0: USB hub found [ 3.916744] hub 3-1.1:1.0: 7 ports detected [ 4.064571] usb 3-1.4: new full-speed USB device number 6 using xhci_hcd [ 4.185127] usb 3-1.4: New USB device found, idVendor=04ca, idProduct=00bb, bcdDevice= 0.02 [ 4.185138] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 4.185142] usb 3-1.4: Product: HP 710 Wireless KB MS Combo [ 4.185145] usb 3-1.4: Manufacturer: Lite-On Technology Corp. [ 5.064331] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 5.964331] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 5.964516] usb usb3-port2: unable to enumerate USB device [ 6.044358] usb 3-1.1.1: new high-speed USB device number 9 using xhci_hcd [ 6.150639] usb 3-1.1.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 6.150649] usb 3-1.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 6.150653] usb 3-1.1.1: Product: USB 2.0 Hub [ 6.188014] hub 3-1.1.1:1.0: USB hub found [ 6.188274] hub 3-1.1.1:1.0: 4 ports detected [ 6.276479] usb 3-3: new full-speed USB device number 10 using xhci_hcd [ 6.444538] usb 3-3: New USB device found, idVendor=0bda, idProduct=2852, bcdDevice= 0.00 [ 6.444548] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.444552] usb 3-3: Product: Bluetooth Radio [ 6.444555] usb 3-3: Manufacturer: Realtek [ 6.444557] usb 3-3: SerialNumber: ... [ 6.504605] usb 3-1.1.4: new high-speed USB device number 11 using xhci_hcd [ 6.608299] usb 3-1.1.4: New USB device found, idVendor=152e, idProduct=1640, bcdDevice= 1.59 [ 6.608309] usb 3-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 6.608313] usb 3-1.1.4: Product: SuperMulti RW [ 6.608316] usb 3-1.1.4: Manufacturer: HLDS Inc [ 6.608318] usb 3-1.1.4: SerialNumber: ... [ 6.784492] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 12 using xhci_hcd [ 6.964535] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [ 7.252427] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [ 7.540314] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 13 using xhci_hcd [ 7.720419] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [ 8.008567] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [ 8.116895] usb 3-1.1.1-port2: attempt power cycle [ 8.244489] usb 3-4: new high-speed USB device number 14 using xhci_hcd [ 8.484020] usb 3-4: New USB device found, idVendor=0408, idProduct=5450, bcdDevice= 0.11 [ 8.484030] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 8.484034] usb 3-4: Product: HP 5M Camera [ 8.484037] usb 3-4: Manufacturer: SunplusIT Inc [ 8.484039] usb 3-4: SerialNumber: ... [ 8.578902] hid: raw HID events driver (C) Jiri Kosina [ 8.582679] usb-storage 3-1.1.4:1.0: USB Mass Storage device detected [ 8.582995] scsi host2: usb-storage 3-1.1.4:1.0 [ 8.583148] usbcore: registered new interface driver usb-storage [ 8.593961] usbcore: registered new interface driver usbhid [ 8.593967] usbhid: USB HID core driver [ 8.596556] input: Lite-On Technology Corp. HP 710 Wireless KB MS Combo as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1.4/3-1.4:1.0/0003:04CA:00BB.0001/input/input4 [ 8.660568] hid-generic 0003:04CA:00BB.0001: input,hidraw0: USB HID v1.11 Keyboard [Lite-On Technology Corp. HP 710 Wireless KB MS Combo] on usb-0000:04:00.4-1.4/input0 [ 8.661056] input: Lite-On Technology Corp. HP 710 Wireless KB MS Combo Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1.4/3-1.4:1.1/0003:04CA:00BB.0002/input/input5 [ 8.720692] input: Lite-On Technology Corp. HP 710 Wireless KB MS Combo as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1.4/3-1.4:1.1/0003:04CA:00BB.0002/input/input6 [ 8.721090] hid-generic 0003:04CA:00BB.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Lite-On Technology Corp. HP 710 Wireless KB MS Combo] on usb-0000:04:00.4-1.4/input1 [ 8.721295] input: Lite-On Technology Corp. HP 710 Wireless KB MS Combo as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1.4/3-1.4:1.2/0003:04CA:00BB.0003/input/input7 [ 8.721659] hid-generic 0003:04CA:00BB.0003: input,hidraw2: USB HID v1.11 Mouse [Lite-On Technology Corp. HP 710 Wireless KB MS Combo] on usb-0000:04:00.4-1.4/input2 [ 8.820358] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 15 using xhci_hcd [ 8.820445] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [ 9.028517] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [ 9.236462] usb 3-XXX.XXX.XXX.XXX: device not accepting address 15, error -71 [ 9.420317] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 16 using xhci_hcd [ 9.420437] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [ 9.611066] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GE20LU10 FE06 PQ: 0 ANSI: 0 [ 9.614788] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 9.614793] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.628671] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 9.628829] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 9.632364] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [ 9.840312] usb 3-XXX.XXX.XXX.XXX: device not accepting address 16, error -71 [ 9.840554] usb 3-1.1.1-port2: unable to enumerate USB device [ 13.500258] raid6: avx2x4 gen() 21279 MB/s [ 13.568257] raid6: avx2x4 xor() 9766 MB/s [ 13.636257] raid6: avx2x2 gen() 37833 MB/s [ 13.704542] raid6: avx2x2 xor() 25169 MB/s [ 13.772258] raid6: avx2x1 gen() 29731 MB/s [ 13.840493] raid6: avx2x1 xor() 18987 MB/s [ 13.908258] raid6: sse2x4 gen() 18179 MB/s [ 13.976482] raid6: sse2x4 xor() 9056 MB/s [ 14.044477] raid6: sse2x2 gen() 20596 MB/s [ 14.112467] raid6: sse2x2 xor() 12891 MB/s [ 14.180258] raid6: sse2x1 gen() 15364 MB/s [ 14.248259] raid6: sse2x1 xor() 9695 MB/s [ 14.248260] raid6: using algorithm avx2x2 gen() 37833 MB/s [ 14.248261] raid6: .... xor() 25169 MB/s, rmw enabled [ 14.248261] raid6: using avx2x2 recovery algorithm [ 14.251097] xor: automatically using best checksumming function avx [ 14.277265] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 16.109992] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 26.138786] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro. Quota mode: none. [ 26.213221] pstore: Using crash dump compression: deflate [ 26.213240] pstore: Registered efi as persistent store backend [ 28.015727] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 28.398921] lp: driver loaded but no devices found [ 28.525321] ppdev: user-space parallel port driver [ 38.409442] acpi-tad ACPI000E:00: Missing _PRW [ 38.550995] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 38.551000] RAPL PMU: hw unit of domain package 2^-16 Joules [ 38.587052] ACPI BIOS Error (bug): Attempt to CreateField of length zero (20210730/dsopcode-133) [ 38.587069] [ 38.587072] Initialized Local Variables for Method [HWMC]: [ 38.587075] Local0: 0000000043994edb <Obj> Integer 0000000000000004 [ 38.587087] Local1: 000000000cc92e11 <Obj> Buffer(12) 00 00 00 00 00 00 00 00 [ 38.587105] Local5: 000000000589f5ba <Obj> Integer 0000000000000000 [ 38.587113] [ 38.587115] Initialized Arguments for Method [HWMC]: (2 arguments defined for method invocation) [ 38.587117] Arg0: 00000000d81e1e38 <Obj> Integer 0000000000000002 [ 38.587125] Arg1: 0000000009a98606 <Obj> Buffer(144) 53 45 43 55 01 00 00 00 [ 38.587142] [ 38.587145] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_OPERAND_VALUE) (20210730/psparse-529) [ 38.587166] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_OPERAND_VALUE) (20210730/psparse-529) [ 38.595048] input: HP WMI hotkeys as /devices/virtual/input/input8 [ 38.603173] ACPI BIOS Error (bug): Attempt to CreateField of length zero (20210730/dsopcode-133) [ 38.603189] [ 38.603192] Initialized Local Variables for Method [HWMC]: [ 38.603194] Local0: 00000000967e9efd <Obj> Integer 0000000000000004 [ 38.603205] Local1: 0000000066c6b8e3 <Obj> Buffer(12) 00 00 00 00 00 00 00 00 [ 38.603222] Local5: 00000000cc32f7c1 <Obj> Integer 0000000000000000 [ 38.603230] [ 38.603233] Initialized Arguments for Method [HWMC]: (2 arguments defined for method invocation) [ 38.603235] Arg0: 00000000d81e1e38 <Obj> Integer 0000000000000002 [ 38.603242] Arg1: 0000000046dffff1 <Obj> Buffer(144) 53 45 43 55 01 00 00 00 [ 38.603259] [ 38.603262] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_OPERAND_VALUE) (20210730/psparse-529) [ 38.603280] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_OPERAND_VALUE) (20210730/psparse-529) [ 38.913207] ccp 0000:04:00.2: enabling device (0100 -> 0102) [ 38.913362] ccp 0000:04:00.2: ccp: unable to access the device: you might be running a broken BIOS. [ 38.923527] ccp 0000:04:00.2: tee enabled [ 38.923533] ccp 0000:04:00.2: psp enabled [ 39.276279] kvm: Nested Virtualization enabled [ 39.276283] SVM: kvm: Nested Paging enabled [ 39.276297] SVM: Virtual VMLOAD VMSAVE supported [ 39.276298] SVM: Virtual GIF supported [ 39.500194] MCE: In-kernel MCE decoding enabled. [ 39.664996] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 39.665354] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 39.932193] Bluetooth: Core ver 2.22 [ 39.932258] NET: Registered PF_BLUETOOTH protocol family [ 39.932259] Bluetooth: HCI device and connection manager initialized [ 39.932263] Bluetooth: HCI socket layer initialized [ 39.932264] Bluetooth: L2CAP socket layer initialized [ 39.932266] Bluetooth: SCO socket layer initialized [ 39.959955] intel_rapl_common: Found RAPL domain package [ 39.959960] intel_rapl_common: Found RAPL domain core [ 40.221009] usbcore: registered new interface driver btusb [ 40.222567] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000a lmp_ver=0b lmp_subver=8852 [ 40.224607] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 40.224615] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852au_fw.bin [ 40.661955] rtw89_pci 0000:02:00.0: enabling device (0100 -> 0103) [ 40.705247] snd_hda_intel 0000:04:00.1: enabling device (0100 -> 0102) [ 40.705355] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client [ 40.705367] snd_hda_intel 0000:04:00.1: Applying patch firmware 'hda-jack-retask.fw' [ 40.705483] snd_hda_intel 0000:04:00.6: enabling device (0100 -> 0102) [ 40.705523] snd_hda_intel 0000:04:00.6: Applying patch firmware 'hda-jack-retask.fw' [ 40.750191] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852au_config.bin [ 40.750419] Bluetooth: hci0: RTL: cfg_sz 6, total sz 44555 [ 40.785642] rtw89_pci 0000:02:00.0: Firmware version XXX.XXX.XXX.XXX, cmd version 0, type 1 [ 40.785652] rtw89_pci 0000:02:00.0: Firmware version XXX.XXX.XXX.XXX, cmd version 0, type 3 [ 40.802261] rtw89_pci 0000:02:00.0: chip rfe_type is 1 [ 40.861300] rtw89_pci 0000:02:00.0 wlp2s0: renamed from wlan0 [ 40.927031] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 40.928514] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input9 [ 41.127612] Bluetooth: hci0: RTL: fw version 0xdfb76d7a [ 41.145767] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC274: line_outs=3 (0x17/0x14/0x1e/0x0/0x0) type:speaker [ 41.145777] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 41.145782] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 41.145785] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 41.145788] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 41.145790] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 41.465463] mc: Linux media interface: v0.10 [ 41.611886] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input10 [ 41.612170] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input11 [ 41.619421] videodev: Linux video capture interface: v2.00 [ 42.226527] usb 3-4: Found UVC 1.50 device HP 5M Camera (0408:5450) [ 42.307526] input: HP 5M Camera: HP 5M Camera as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-4/3-4:1.0/input/input12 [ 42.312527] usb 3-4: Found UVC 1.50 device HP 5M Camera (0408:5450) [ 42.332161] input: HP 5M Camera: HP IR Camera as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-4/3-4:1.2/input/input13 [ 42.332336] usbcore: registered new interface driver uvcvideo [ 44.927350] spl: loading out-of-tree module taints kernel. [ 45.002021] znvpair: module license 'CDDL' taints kernel. [ 45.002027] Disabling lock debugging due to kernel taint [ 45.355833] ZFS: Loaded module v2.1.5-1ubuntu6~22.04.1, ZFS pool version 5000, ZFS filesystem version 5 [ 45.724394] loop0: detected capacity change from 0 to 765496 [ 45.768093] loop1: detected capacity change from 0 to 8 [ 45.948020] loop2: detected capacity change from 0 to 242136 [ 45.961661] loop3: detected capacity change from 0 to 242136 [ 46.116182] loop4: detected capacity change from 0 to 129936 [ 46.145565] loop5: detected capacity change from 0 to 129944 [ 46.304362] loop6: detected capacity change from 0 to 151256 [ 46.392982] loop7: detected capacity change from 0 to 151256 [ 46.562769] loop8: detected capacity change from 0 to 15896 [ 46.593444] loop9: detected capacity change from 0 to 15664 [ 46.757125] loop10: detected capacity change from 0 to 955472 [ 46.825449] loop11: detected capacity change from 0 to 994336 [ 46.949524] loop12: detected capacity change from 0 to 187776 [ 47.251690] loop13: detected capacity change from 0 to 399696 [ 47.393349] loop14: detected capacity change from 0 to 414840 [ 47.517890] loop15: detected capacity change from 0 to 918896 [ 47.905742] loop16: detected capacity change from 0 to 918896 [ 65.137040] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 65.137046] Bluetooth: BNEP filters: protocol multicast [ 65.137052] Bluetooth: BNEP socket layer initialized [ 65.429165] NET: Registered PF_ALG protocol family [ 70.284324] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) [ 70.488580] r8169 0000:01:00.0 enp1s0: Link is Down [ 74.381454] loop17: detected capacity change from 0 to 8 [ 76.321913] Lockdown: Xorg: raw io port access is restricted; see man kernel_lockdown.7 [ 77.889839] wlp2s0: authenticate with B11835301918FF3AFF9C6BD5E62EB00F [ 78.120418] wlp2s0: send auth to B11835301918FF3AFF9C6BD5E62EB00F (try 1/3) [ 78.121978] wlp2s0: authenticated [ 78.128312] wlp2s0: associate with B11835301918FF3AFF9C6BD5E62EB00F (try 1/3) [ 78.154604] wlp2s0: RX AssocResp from B11835301918FF3AFF9C6BD5E62EB00F (capab=0x431 status=0 aid=2) [ 78.268591] wlp2s0: associated [ 78.352753] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 85.457549] bpfilter: Loaded bpfilter_umh pid 1503 [ 85.457875] joha-HP-Pavilion-All-in-One-Desktop-24-ca0xxx unknown: Started bpfilter [ 85.898060] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 87.296652] Lockdown: modprobe: unsigned module loading is restricted; see man kernel_lockdown.7 [ 91.150021] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 91.150026] wireguard: Copyright (C) EEB1-A71F Jason A. Donenfeld <XXX@XXX>. All Rights Reserved. [ 92.392436] loop17: detected capacity change from 0 to 636528 [ 101.038404] Bluetooth: RFCOMM TTY layer initialized [ 101.038415] Bluetooth: RFCOMM socket layer initialized [ 101.038424] Bluetooth: RFCOMM ver 1.11 [ 223.588612] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 224.488579] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 224.488704] usb usb3-port2: attempt power cycle [ 225.704577] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 226.604551] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 226.604667] usb usb3-port2: unable to enumerate USB device [ 232.376600] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 233.276334] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 233.276435] usb usb3-port2: attempt power cycle [ 234.492401] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 235.392393] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 235.392513] usb usb3-port2: unable to enumerate USB device [ 239.488553] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 240.388351] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 240.388481] usb usb3-port2: attempt power cycle [ 241.604527] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 242.504298] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 242.504383] usb usb3-port2: unable to enumerate USB device [ 254.879520] ntfs3: Max link count 4000 [ 254.879525] ntfs3: Enabled Linux POSIX ACLs support [ 254.879527] ntfs3: Read-only LZX/Xpress compression included [ 254.880354] ntfs3: Unknown parameter 'windows_names' [ 264.675070] ntfs3: Unknown parameter 'windows_names' [ 272.695204] ntfs3: Unknown parameter 'windows_names' [ 280.446558] ntfs3: Unknown parameter 'windows_names' [ 285.055460] /dev/loop17: Can't open blockdev [ 328.792593] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 329.692688] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 329.692764] usb usb3-port2: attempt power cycle [ 330.912296] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 331.820316] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 331.820409] usb usb3-port2: unable to enumerate USB device [ 380.252449] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 381.152559] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 381.152683] usb usb3-port2: attempt power cycle [ 382.368563] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 383.268383] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 383.268504] usb usb3-port2: unable to enumerate USB device [ 395.904580] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 396.804574] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 396.804702] usb usb3-port2: attempt power cycle [ 398.020655] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 398.920774] usb usb3-port2: Cannot enable. Maybe the USB cable is bad? [ 398.920888] usb usb3-port2: unable to enumerate USB device [ 437.733450] wlp2s0: deauthenticating from B11835301918FF3AFF9C6BD5E62EB00F by local choice (Reason: 3=DEAUTH_LEAVING) [ 438.269370] PM: suspend entry (deep) [ 438.388095] Filesystems sync: 0.118 seconds [ 438.513493] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 438.515708] OOM killer disabled. [ 438.515709] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 438.516974] printk: Suspending console(s) (use no_console_suspend to debug) [ 438.564095] sd 1:0:0:0: [sda] Synchronizing SCSI cache [ 438.589176] sd 1:0:0:0: [sda] Stopping disk [ 438.641906] [drm] free PSP TMR buffer [ 438.989014] ACPI: EC: interrupt blocked [ 439.032537] ACPI: PM: Preparing to enter system sleep state S3 [ 439.369019] ACPI: EC: event blocked [ 439.369022] ACPI: EC: EC stopped [ 439.369023] ACPI: PM: Saving platform NVS memory [ 439.369460] Disabling non-boot CPUs ... [ 439.373753] smpboot: CPU 1 is now offline [ 439.378425] smpboot: CPU 2 is now offline [ 439.382355] smpboot: CPU 3 is now offline [ 439.386155] smpboot: CPU 4 is now offline [ 439.389704] smpboot: CPU 5 is now offline [ 439.393414] smpboot: CPU 6 is now offline [ 439.396820] smpboot: CPU 7 is now offline [ 439.399412] smpboot: CPU 8 is now offline [ 439.402295] smpboot: CPU 9 is now offline [ 439.405123] smpboot: CPU 10 is now offline [ 439.408117] smpboot: CPU 11 is now offline [ 439.410362] smpboot: CPU 12 is now offline [ 439.413154] smpboot: CPU 13 is now offline [ 439.415821] smpboot: CPU 14 is now offline [ 439.417151] Spectre V2 : Update user space SMT mitigation: STIBP off [ 439.418883] smpboot: CPU 15 is now offline [ 439.419177] ACPI: PM: Low-level resume complete [ 439.419177] ACPI: EC: EC started [ 439.419177] ACPI: PM: Restoring platform NVS memory [ 439.419177] LVT offset 0 assigned for vector 0x400 [ 439.419177] Enabling non-boot CPUs ... [ 439.419177] x86: Booting SMP configuration: [ 439.419177] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 439.373509] microcode: CPU1: patch_level=0x08608103 [ 439.420513] ACPI: \_SB_.PLTF.P001: Found 3 idle states [ 439.421171] Spectre V2 : Update user space SMT mitigation: STIBP always-on [ 439.421196] CPU1 is up [ 439.421278] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 439.420333] microcode: CPU2: patch_level=0x08608103 [ 439.421724] ACPI: \_SB_.PLTF.P002: Found 3 idle states [ 439.422181] CPU2 is up [ 439.422206] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 439.421596] microcode: CPU3: patch_level=0x08608103 [ 439.422589] ACPI: \_SB_.PLTF.P003: Found 3 idle states [ 439.423099] CPU3 is up [ 439.423122] smpboot: Booting Node 0 Processor 4 APIC 0x4 [ 439.422464] microcode: CPU4: patch_level=0x08608103 [ 439.423841] ACPI: \_SB_.PLTF.P004: Found 3 idle states [ 439.424886] CPU4 is up [ 439.424919] smpboot: Booting Node 0 Processor 5 APIC 0x5 [ 439.423701] microcode: CPU5: patch_level=0x08608103 [ 439.425223] ACPI: \_SB_.PLTF.P005: Found 3 idle states [ 439.425658] CPU5 is up [ 439.425677] smpboot: Booting Node 0 Processor 6 APIC 0x6 [ 439.425127] microcode: CPU6: patch_level=0x08608103 [ 439.426105] ACPI: \_SB_.PLTF.P006: Found 3 idle states [ 439.426571] CPU6 is up [ 439.426591] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 439.425944] microcode: CPU7: patch_level=0x08608103 [ 439.426898] ACPI: \_SB_.PLTF.P007: Found 3 idle states [ 439.427336] CPU7 is up [ 439.427355] smpboot: Booting Node 0 Processor 8 APIC 0x8 [ 439.426785] microcode: CPU8: patch_level=0x08608103 [ 439.427932] ACPI: \_SB_.PLTF.P008: Found 3 idle states [ 439.429123] CPU8 is up [ 439.429154] smpboot: Booting Node 0 Processor 9 APIC 0x9 [ 439.428257] microcode: CPU9: patch_level=0x08608103 [ 439.429665] ACPI: \_SB_.PLTF.P009: Found 3 idle states [ 439.430335] CPU9 is up [ 439.430360] smpboot: Booting Node 0 Processor 10 APIC 0xa [ 439.429547] microcode: CPU10: patch_level=0x08608103 [ 439.430864] ACPI: \_SB_.PLTF.P00A: Found 3 idle states [ 439.431992] CPU10 is up [ 439.432017] smpboot: Booting Node 0 Processor 11 APIC 0xb [ 439.432255] microcode: CPU11: patch_level=0x08608103 [ 439.432561] ACPI: \_SB_.PLTF.P00B: Found 3 idle states [ 439.433368] CPU11 is up [ 439.433391] smpboot: Booting Node 0 Processor 12 APIC 0xc [ 439.432453] microcode: CPU12: patch_level=0x08608103 [ 439.433914] ACPI: \_SB_.PLTF.P00C: Found 3 idle states [ 439.434823] CPU12 is up [ 439.434846] smpboot: Booting Node 0 Processor 13 APIC 0xd [ 439.433746] microcode: CPU13: patch_level=0x08608103 [ 439.435226] ACPI: \_SB_.PLTF.P00D: Found 3 idle states [ 439.436514] CPU13 is up [ 439.436537] smpboot: Booting Node 0 Processor 14 APIC 0xe [ 439.435169] microcode: CPU14: patch_level=0x08608103 [ 439.437053] ACPI: \_SB_.PLTF.P00E: Found 3 idle states [ 439.438031] CPU14 is up [ 439.438055] smpboot: Booting Node 0 Processor 15 APIC 0xf [ 439.436903] microcode: CPU15: patch_level=0x08608103 [ 439.438444] ACPI: \_SB_.PLTF.P00F: Found 3 idle states [ 439.439407] CPU15 is up [ 439.440931] ACPI: PM: Waking up from system sleep state S3 [ 439.441578] ACPI: EC: interrupt unblocked [ 439.485866] ACPI: EC: event unblocked [ 439.486003] pci 0000:00:00.2: can't derive routing for PCI INT A [ 439.486007] pci 0000:00:00.2: PCI INT A: no GSI [ 439.486164] [drm] PCIE GART of 1024M enabled. [ 439.486167] [drm] PTB located at 0x000000F400900000 [ 439.486192] [drm] PSP is resuming... [ 439.487078] sd 1:0:0:0: [sda] Starting disk [ 439.506052] [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR [ 439.509839] nvme nvme0: Shutdown timeout set to 8 seconds [ 439.573269] nvme nvme0: 12/0/0 default/read/poll queues [ 439.589025] amdgpu 0000:04:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 439.598456] amdgpu 0000:04:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 439.598459] amdgpu 0000:04:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available [ 439.598463] amdgpu 0000:04:00.0: amdgpu: SMU is resuming... [ 439.598867] amdgpu 0000:04:00.0: amdgpu: dpm has been disabled [ 439.600028] amdgpu 0000:04:00.0: amdgpu: SMU is resumed successfully! [ 439.601305] [drm] kiq ring mec 2 pipe 1 q 0 [ 439.602149] [drm] DMUB hardware initialized: version=0x0101001F [ 439.604818] [drm] REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control line:366 [ 439.606960] [drm] REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control line:374 [ 439.609093] [drm] REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control line:382 [ 439.798102] usb 3-3: reset full-speed USB device number 10 using xhci_hcd [ 439.800209] ata1: SATA link down (SStatus 0 SControl 300) [ 439.814135] [drm] VCN decode and encode initialized successfully(under DPG Mode). [ 439.814181] [drm] JPEG decode initialized successfully. [ 439.814394] amdgpu 0000:04:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 439.814397] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 439.814398] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 439.814399] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 439.814400] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 439.814401] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 439.814401] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 439.814402] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 439.814403] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 439.814404] amdgpu 0000:04:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 439.814405] amdgpu 0000:04:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [ 439.814406] amdgpu 0000:04:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [ 439.814407] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [ 439.814407] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [ 439.814408] amdgpu 0000:04:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [ 440.094015] usb 3-4: reset high-speed USB device number 14 using xhci_hcd [ 440.320097] OOM killer enabled. [ 440.320101] Restarting tasks ... done. [ 440.333622] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000a lmp_ver=0b lmp_subver=8852 [ 440.335607] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 440.335614] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852au_fw.bin [ 440.335629] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852au_config.bin [ 440.335645] Bluetooth: hci0: RTL: cfg_sz 6, total sz 44555 [ 440.377213] PM: suspend exit [ 440.452298] usb 3-2: new high-speed USB device number 41 using xhci_hcd [ 440.619631] usb 3-2: New USB device found, idVendor=0d49, idProduct=3200, bcdDevice= 0.01 [ 440.619641] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 440.619645] usb 3-2: Product: Maxtor 3200 [ 440.619648] usb 3-2: Manufacturer: Maxtor Corporation [ 440.619651] usb 3-2: SerialNumber: ... [ 440.620556] usb-storage 3-2:1.0: USB Mass Storage device detected [ 440.620836] scsi host3: usb-storage 3-2:1.0 [ 440.712515] Bluetooth: hci0: RTL: fw version 0xdfb76d7a [ 440.780448] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 42 using xhci_hcd [ 440.960585] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [ 441.248530] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [ 441.536438] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 43 using xhci_hcd [ 441.716485] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [ 442.004488] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [ 442.112619] usb 3-1.1.1-port2: attempt power cycle [ 442.244507] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 442.245993] ata2.00: configured for UDMA/133 [ 442.360544] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) [ 442.372431] scsi 3:0:0:0: Direct-Access Maxtor 3200 0344 PQ: 0 ANSI: 4 [ 442.372920] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 442.395385] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 442.396140] sd 3:0:0:0: [sdb] Write Protect is off [ 442.396146] sd 3:0:0:0: [sdb] Mode Sense: 17 00 00 00 [ 442.396908] sd 3:0:0:0: [sdb] No Caching mode page found [ 442.396918] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 442.423435] sdb: sdb1 [ 442.425999] sd 3:0:0:0: [sdb] Attached SCSI disk [ 442.560828] r8169 0000:01:00.0 enp1s0: Link is Down [ 442.652398] usbcore: registered new interface driver uas [ 442.824278] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 44 using xhci_hcd [ 442.824610] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [ 443.032324] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [ 443.240274] usb 3-XXX.XXX.XXX.XXX: device not accepting address 44, error -71 [ 443.420286] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 45 using xhci_hcd [ 443.421047] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [ 443.628497] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [ 443.836390] usb 3-XXX.XXX.XXX.XXX: device not accepting address 45, error -71 [ 443.836684] usb 3-1.1.1-port2: unable to enumerate USB device [ 446.854246] wlp2s0: authenticate with B11835301918FF3AFF9C6BD5E62EB00F [ 447.076709] wlp2s0: send auth to B11835301918FF3AFF9C6BD5E62EB00F (try 1/3) [ 447.078423] wlp2s0: authenticated [ 447.080263] wlp2s0: associate with B11835301918FF3AFF9C6BD5E62EB00F (try 1/3) [ 447.084593] wlp2s0: RX AssocResp from B11835301918FF3AFF9C6BD5E62EB00F (capab=0x431 status=0 aid=2) [ 447.196565] wlp2s0: associated [ 447.236773] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 451.216838] ntfs3: Unknown parameter 'windows_names' [ 1838.217169] rtw89_pci 0000:02:00.0: timed out to flush queues [ 1838.424302] rtw89_pci 0000:02:00.0: timed out to flush queues [ 1838.976579] rtw89_pci 0000:02:00.0: timed out to flush queues [ 1839.184305] rtw89_pci 0000:02:00.0: timed out to flush queues [ 1839.728548] rtw89_pci 0000:02:00.0: timed out to flush queues [ 1845.172285] rtw89_pci 0000:02:00.0: timed out to flush queues [ 1845.372582] rtw89_pci 0000:02:00.0: timed out to flush queues [ 1845.900272] rtw89_pci 0000:02:00.0: timed out to flush queues [ 1846.104302] rtw89_pci 0000:02:00.0: timed out to flush queues [ 1849.514372] rtw89_pci 0000:02:00.0: timed out to flush queues [ 1849.720271] rtw89_pci 0000:02:00.0: timed out to flush queues [ 4456.652812] rtw89_pci 0000:02:00.0: timed out to flush queues [ 4456.860260] rtw89_pci 0000:02:00.0: timed out to flush queues [ 4457.381236] rtw89_pci 0000:02:00.0: timed out to flush queues [ 4457.582605] rtw89_pci 0000:02:00.0: timed out to flush queues [ 4458.105190] rtw89_pci 0000:02:00.0: timed out to flush queues [ 4458.308281] rtw89_pci 0000:02:00.0: timed out to flush queues [ 6028.340284] rtw89_pci 0000:02:00.0: timed out to flush queues [ 6028.548268] rtw89_pci 0000:02:00.0: timed out to flush queues [ 9522.029031] yoshimi[29833]: segfault at 7fade0203411 ip 0000556838e93ed3 sp 00007fadd89e8810 error 4 in yoshimi[5568387f7000+94d000] Code: 89 c7 e8 e0 5a 96 ff eb 13 66 0f 1f 44 00 00 80 bf 03 a4 01 00 00 0f 85 e3 01 00 00 bf d0 07 00 00 e8 e1 69 96 ff 48 8b 7b 08 <80> bf 01 a4 01 00 00 75 dc 48 8b bc 24 e0 00 00 00 e9 f7 fe ff ff [11700.729194] wlp2s0: deauthenticating from B11835301918FF3AFF9C6BD5E62EB00F by local choice (Reason: 3=DEAUTH_LEAVING) [11701.226855] PM: suspend entry (deep) [11701.391907] Filesystems sync: 0.165 seconds [11701.513797] Freezing user space processes ... (elapsed 0.002 seconds) done. [11701.515935] OOM killer disabled. [11701.515936] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [11701.517217] printk: Suspending console(s) (use no_console_suspend to debug) [11701.559205] sd 1:0:0:0: [sda] Synchronizing SCSI cache [11701.560436] sd 1:0:0:0: [sda] Stopping disk [11701.635738] [drm] free PSP TMR buffer [11702.004314] ACPI: EC: interrupt blocked [11702.048726] ACPI: PM: Preparing to enter system sleep state S3 [11702.377025] ACPI: EC: event blocked [11702.377028] ACPI: EC: EC stopped [11702.377030] ACPI: PM: Saving platform NVS memory [11702.377386] Disabling non-boot CPUs ... [11702.381724] smpboot: CPU 1 is now offline [11702.386206] smpboot: CPU 2 is now offline [11702.389655] smpboot: CPU 3 is now offline [11702.393623] smpboot: CPU 4 is now offline [11702.397575] smpboot: CPU 5 is now offline [11702.400759] smpboot: CPU 6 is now offline [11702.403724] smpboot: CPU 7 is now offline [11702.407650] smpboot: CPU 8 is now offline [11702.411293] smpboot: CPU 9 is now offline [11702.414909] smpboot: CPU 10 is now offline [11702.417758] smpboot: CPU 11 is now offline [11702.421393] smpboot: CPU 12 is now offline [11702.423924] smpboot: CPU 13 is now offline [11702.426823] smpboot: CPU 14 is now offline [11702.427901] Spectre V2 : Update user space SMT mitigation: STIBP off [11702.430445] smpboot: CPU 15 is now offline [11702.430818] ACPI: PM: Low-level resume complete [11702.430818] ACPI: EC: EC started [11702.430818] ACPI: PM: Restoring platform NVS memory [11702.430818] LVT offset 0 assigned for vector 0x400 [11702.430818] Enabling non-boot CPUs ... [11702.430818] x86: Booting SMP configuration: [11702.430818] smpboot: Booting Node 0 Processor 1 APIC 0x1 [11702.424299] microcode: CPU1: patch_level=0x08608103 [11702.432462] ACPI: \_SB_.PLTF.P001: Found 3 idle states [11702.433221] Spectre V2 : Update user space SMT mitigation: STIBP always-on [11702.433249] CPU1 is up [11702.433335] smpboot: Booting Node 0 Processor 2 APIC 0x2 [11702.432224] microcode: CPU2: patch_level=0x08608103 [11702.433837] ACPI: \_SB_.PLTF.P002: Found 3 idle states [11702.434289] CPU2 is up [11702.434314] smpboot: Booting Node 0 Processor 3 APIC 0x3 [11702.424300] microcode: CPU3: patch_level=0x08608103 [11702.434727] ACPI: \_SB_.PLTF.P003: Found 3 idle states [11702.435241] CPU3 is up [11702.435265] smpboot: Booting Node 0 Processor 4 APIC 0x4 [11702.434585] microcode: CPU4: patch_level=0x08608103 [11702.435998] ACPI: \_SB_.PLTF.P004: Found 3 idle states [11702.436569] CPU4 is up [11702.436589] smpboot: Booting Node 0 Processor 5 APIC 0x5 [11702.435855] microcode: CPU5: patch_level=0x08608103 [11702.436881] ACPI: \_SB_.PLTF.P005: Found 3 idle states [11702.437335] CPU5 is up [11702.437356] smpboot: Booting Node 0 Processor 6 APIC 0x6 [11702.436783] microcode: CPU6: patch_level=0x08608103 [11702.437797] ACPI: \_SB_.PLTF.P006: Found 3 idle states [11702.438426] CPU6 is up [11702.438449] smpboot: Booting Node 0 Processor 7 APIC 0x7 [11702.437620] microcode: CPU7: patch_level=0x08608103 [11702.438776] ACPI: \_SB_.PLTF.P007: Found 3 idle states [11702.439292] CPU7 is up [11702.439312] smpboot: Booting Node 0 Processor 8 APIC 0x8 [11702.438667] microcode: CPU8: patch_level=0x08608103 [11702.439921] ACPI: \_SB_.PLTF.P008: Found 3 idle states [11702.441133] CPU8 is up [11702.441161] smpboot: Booting Node 0 Processor 9 APIC 0x9 [11702.439729] microcode: CPU9: patch_level=0x08608103 [11702.441738] ACPI: \_SB_.PLTF.P009: Found 3 idle states [11702.442424] CPU9 is up [11702.442448] smpboot: Booting Node 0 Processor 10 APIC 0xa [11702.441609] microcode: CPU10: patch_level=0x08608103 [11702.442971] ACPI: \_SB_.PLTF.P00A: Found 3 idle states [11702.444121] CPU10 is up [11702.444145] smpboot: Booting Node 0 Processor 11 APIC 0xb [11702.442810] microcode: CPU11: patch_level=0x08608103 [11702.444693] ACPI: \_SB_.PLTF.P00B: Found 3 idle states [11702.445480] CPU11 is up [11702.445505] smpboot: Booting Node 0 Processor 12 APIC 0xc [11702.444580] microcode: CPU12: patch_level=0x08608103 [11702.446026] ACPI: \_SB_.PLTF.P00C: Found 3 idle states [11702.447026] CPU12 is up [11702.447049] smpboot: Booting Node 0 Processor 13 APIC 0xd [11702.445944] microcode: CPU13: patch_level=0x08608103 [11702.447448] ACPI: \_SB_.PLTF.P00D: Found 3 idle states [11702.448630] CPU13 is up [11702.448654] smpboot: Booting Node 0 Processor 14 APIC 0xe [11702.447324] microcode: CPU14: patch_level=0x08608103 [11702.449187] ACPI: \_SB_.PLTF.P00E: Found 3 idle states [11702.450222] CPU14 is up [11702.450245] smpboot: Booting Node 0 Processor 15 APIC 0xf [11702.430417] microcode: CPU15: patch_level=0x08608103 [11702.450639] ACPI: \_SB_.PLTF.P00F: Found 3 idle states [11702.451664] CPU15 is up [11702.453115] ACPI: PM: Waking up from system sleep state S3 [11702.453776] ACPI: EC: interrupt unblocked [11702.493702] ACPI: EC: event unblocked [11702.493912] pci 0000:00:00.2: can't derive routing for PCI INT A [11702.493916] pci 0000:00:00.2: PCI INT A: no GSI [11702.494038] [drm] PCIE GART of 1024M enabled. [11702.494042] [drm] PTB located at 0x000000F400900000 [11702.494061] [drm] PSP is resuming... [11702.495025] sd 1:0:0:0: [sda] Starting disk [11702.513930] [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR [11702.517292] nvme nvme0: Shutdown timeout set to 8 seconds [11702.594548] amdgpu 0000:04:00.0: amdgpu: RAS: optional ras ta ucode is not available [11702.595015] nvme nvme0: 12/0/0 default/read/poll queues [11702.603924] amdgpu 0000:04:00.0: amdgpu: RAP: optional rap ta ucode is not available [11702.603927] amdgpu 0000:04:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available [11702.603931] amdgpu 0000:04:00.0: amdgpu: SMU is resuming... [11702.604081] amdgpu 0000:04:00.0: amdgpu: dpm has been disabled [11702.605339] amdgpu 0000:04:00.0: amdgpu: SMU is resumed successfully! [11702.606581] [drm] kiq ring mec 2 pipe 1 q 0 [11702.607587] [drm] DMUB hardware initialized: version=0x0101001F [11702.610218] [drm] REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control line:366 [11702.612354] [drm] REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control line:374 [11702.614454] [drm] REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control line:382 [11702.736527] [drm] VCN decode and encode initialized successfully(under DPG Mode). [11702.736573] [drm] JPEG decode initialized successfully. [11702.736786] amdgpu 0000:04:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [11702.736789] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [11702.736790] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [11702.736791] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [11702.736791] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [11702.736792] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [11702.736793] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [11702.736794] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [11702.736795] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [11702.736796] amdgpu 0000:04:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [11702.736797] amdgpu 0000:04:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [11702.736797] amdgpu 0000:04:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [11702.736798] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [11702.736799] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [11702.736799] amdgpu 0000:04:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [11702.808848] ata1: SATA link down (SStatus 0 SControl 300) [11702.814501] usb 3-4: reset high-speed USB device number 14 using xhci_hcd [11702.968506] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [11702.970892] ata2.00: configured for UDMA/133 [11703.106515] usb 3-3: reset full-speed USB device number 10 using xhci_hcd [11703.271435] OOM killer enabled. [11703.271438] Restarting tasks ... [11703.273185] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000a lmp_ver=0b lmp_subver=8852 [11703.273342] done. [11703.274281] PM: suspend exit [11703.275173] Bluetooth: hci0: RTL: rom_version status=0 version=1 [11703.275187] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852au_fw.bin [11703.275281] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852au_config.bin [11703.275323] Bluetooth: hci0: RTL: cfg_sz 6, total sz 44555 [11703.368332] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) [11703.456297] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 46 using xhci_hcd [11703.568445] r8169 0000:01:00.0 enp1s0: Link is Down [11703.636538] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [11703.652424] Bluetooth: hci0: RTL: fw version 0xdfb76d7a [11703.928296] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [11704.224288] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 47 using xhci_hcd [11704.404688] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [11704.692284] usb 3-XXX.XXX.XXX.XXX: device descriptor read/64, error -71 [11704.800508] usb 3-1.1.1-port2: attempt power cycle [11705.504280] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 48 using xhci_hcd [11705.504341] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [11705.712341] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [11705.920581] usb 3-XXX.XXX.XXX.XXX: device not accepting address 48, error -71 [11706.104296] usb 3-XXX.XXX.XXX.XXX: new high-speed USB device number 49 using xhci_hcd [11706.104350] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [11706.312540] usb 3-XXX.XXX.XXX.XXX: Device not responding to setup address. [11706.520711] usb 3-XXX.XXX.XXX.XXX: device not accepting address 49, error -71 [11706.520910] usb 3-1.1.1-port2: unable to enumerate USB device [11707.823399] wlp2s0: authenticate with B11835301918FF3AFF9C6BD5E62EB00F [11708.041446] wlp2s0: send auth to B11835301918FF3AFF9C6BD5E62EB00F (try 1/3) [11708.052625] wlp2s0: authenticated [11708.056734] wlp2s0: associate with B11835301918FF3AFF9C6BD5E62EB00F (try 1/3) [11708.060751] wlp2s0: RX AssocResp from B11835301918FF3AFF9C6BD5E62EB00F (capab=0x431 status=0 aid=2) [11708.172563] wlp2s0: associated [11708.240668] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [11781.251521] wlp2s0: deauthenticating from B11835301918FF3AFF9C6BD5E62EB00F by local choice (Reason: 3=DEAUTH_LEAVING) [11795.003660] wlp2s0: authenticate with B11835301918FF3AFF9C6BD5E62EB00F [11795.225822] wlp2s0: send auth to B11835301918FF3AFF9C6BD5E62EB00F (try 1/3) [11795.227373] wlp2s0: authenticated [11795.228292] wlp2s0: associate with B11835301918FF3AFF9C6BD5E62EB00F (try 1/3) [11795.232728] wlp2s0: RX AssocResp from B11835301918FF3AFF9C6BD5E62EB00F (capab=0x431 status=0 aid=2) [11795.344860] wlp2s0: associated [11795.428900] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [12810.380037] lightdm[1914]: segfault at 7feedb169cf0 ip 00007feedbc2e21a sp 00007fffcd3af7d0 error 4 in ld-linux-x86-64.so.2[7feedbc2a000+2a000] Code: 00 00 00 83 e0 f7 41 88 87 1c 03 00 00 49 8b 87 10 01 00 00 48 85 c0 0f 84 9b 00 00 00 f6 05 cc 38 03 00 02 0f 85 a6 00 00 00 <48> 8b 40 08 49 03 07 48 89 c6 48 89 45 c0 49 8b 87 20 01 00 00 48 [12811.194525] wlp2s0: deauthenticating from B11835301918FF3AFF9C6BD5E62EB00F by local choice (Reason: 3=DEAUTH_LEAVING)