[ 0.000000] microcode: updated early: 0x1d -> 0x28, date = 2019-11-12 [ 0.000000] Linux version 6.5.6-300.fc39.x86_64 (XXX@XXX) (gcc (GCC) 13.2.1 20230918 (Red Hat 13.2.1-3), GNU ld version 2.40-13.fc39) #1 SMP PREEMPT_DYNAMIC Fri Oct 6 19:57:21 UTC 2023 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.5.6-300.fc39.x86_64 root=/dev/nvme0n1p1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d6637fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d6638000-0x00000000d663efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000d663f000-0x00000000db132fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db133000-0x00000000db1c8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000db1c9000-0x00000000db3dafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db3db000-0x00000000dbc06fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dbc07000-0x00000000dbffefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: AFOX IH81-MA5/IH81-MA5, BIOS 4.6.5 02/18/2022 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3192.615 MHz processor [ 0.000700] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000703] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000710] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000 [ 0.000716] total RAM covered: 8142M [ 0.000867] Found optimal setting for mtrr clean up [ 0.000868] gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G [ 0.000872] MTRR map: 9 entries (5 fixed + 4 variable; max 25), built from 10 variable MTRRs [ 0.000873] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001208] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ 0.001212] last_pfn = 0xdc000 max_arch_pfn = 0x400000000 [ 0.007366] found SMP MP-table at [mem 0x000fd940-0x000fd94f] Using GB pages for direct mapping [ 0.007728] RAMDISK: [mem 0x33577000-0x35ab2fff] ACPI: Early table checksum verification disabled [ 0.007735] ACPI: RSDP 0x00000000000F0580 000024 (v02 ALASKA) [ 0.007738] ACPI: XSDT 0x00000000DBBE1088 00008C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007742] ACPI: FACP 0x00000000DBBECA40 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.007746] ACPI: DSDT 0x00000000DBBE11A8 00B893 (v02 ALASKA A M I 00000000 INTL 20120711) [ 0.007749] ACPI: FACS 0x00000000DBC06F80 000040 [ 0.007751] ACPI: APIC 0x00000000DBBECB50 000072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.007753] ACPI: FPDT 0x00000000DBBECBC8 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007755] ACPI: FIDT 0x00000000DBBECC10 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.007758] ACPI: ASF! 0x00000000DBBECCB0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.007760] ACPI: DBGP 0x00000000DBBECD58 000034 (v01 ALASKA A M I 00000000 MSFT 00000005) [ 0.007763] ACPI: SSDT 0x00000000DBBECD90 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ 0.007765] ACPI: SSDT 0x00000000DBBED2D0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ 0.007767] ACPI: MCFG 0x00000000DBBEDDA8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.007770] ACPI: HPET 0x00000000DBBEDDE8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.007772] ACPI: SSDT 0x00000000DBBEDE20 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ 0.007774] ACPI: SSDT 0x00000000DBBEE190 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ 0.007777] ACPI: DMAR 0x00000000DBBF16B8 0000B8 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.007779] ACPI: Reserving FACP table memory at [mem 0xdbbeca40-0xdbbecb4b] ACPI: Reserving DSDT table memory at [mem 0xdbbe11a8-0xdbbeca3a] ACPI: Reserving FACS table memory at [mem 0xdbc06f80-0xdbc06fbf] ACPI: Reserving APIC table memory at [mem 0xdbbecb50-0xdbbecbc1] ACPI: Reserving FPDT table memory at [mem 0xdbbecbc8-0xdbbecc0b] ACPI: Reserving FIDT table memory at [mem 0xdbbecc10-0xdbbeccab] ACPI: Reserving ASF! table memory at [mem 0xdbbeccb0-0xdbbecd54] ACPI: Reserving DBGP table memory at [mem 0xdbbecd58-0xdbbecd8b] ACPI: Reserving SSDT table memory at [mem 0xdbbecd90-0xdbbed2c8] ACPI: Reserving SSDT table memory at [mem 0xdbbed2d0-0xdbbedda7] ACPI: Reserving MCFG table memory at [mem 0xdbbedda8-0xdbbedde3] ACPI: Reserving HPET table memory at [mem 0xdbbedde8-0xdbbede1f] ACPI: Reserving SSDT table memory at [mem 0xdbbede20-0xdbbee18c] ACPI: Reserving SSDT table memory at [mem 0xdbbee190-0xdbbf16b7] ACPI: Reserving DMAR table memory at [mem 0xdbbf16b8-0xdbbf176f] No NUMA configuration found [ 0.007843] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff] NODE_DATA(0) allocated [mem 0x21fdd5000-0x21fdfffff] Zone ranges: [ 0.008018] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x000000021fdfffff] Device empty [ 0.008023] Movable zone start for each node [ 0.008025] Early memory node ranges [ 0.008026] node 0: [mem 0x0000000000001000-0x000000000009cfff] node 0: [mem 0x0000000000100000-0x00000000d6637fff] node 0: [mem 0x00000000d663f000-0x00000000db132fff] node 0: [mem 0x00000000db1c9000-0x00000000db3dafff] node 0: [mem 0x00000000dbfff000-0x00000000dbffffff] node 0: [mem 0x0000000100000000-0x000000021fdfffff] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008059] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.017663] On node 0, zone DMA32: 7 pages in unavailable ranges [ 0.017675] On node 0, zone DMA32: 150 pages in unavailable ranges [ 0.017711] On node 0, zone DMA32: 3108 pages in unavailable ranges [ 0.031083] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.031092] On node 0, zone Normal: 512 pages in unavailable ranges [ 0.031100] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.031182] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.031192] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.031194] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.031195] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.031198] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.031200] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.031203] TSC deadline timer available [ 0.031204] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.031217] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0xd6638000-0xd663efff] PM: hibernation: Registered nosave memory: [mem 0xdb133000-0xdb1c8fff] PM: hibernation: Registered nosave memory: [mem 0xdb3db000-0xdbc06fff] PM: hibernation: Registered nosave memory: [mem 0xdbc07000-0xdbffefff] PM: hibernation: Registered nosave memory: [mem 0xdc000000-0xdcffffff] PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdf1fffff] PM: hibernation: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [mem 0xdf200000-0xf7ffffff] available for PCI devices [ 0.031236] Booting paravirtualized kernel on bare hardware [ 0.031238] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.036424] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036869] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u524288 [ 0.036874] pcpu-alloc: s225280 r8192 d28672 u524288 alloc=1*2097152 [ 0.036876] pcpu-alloc: [0] 0 1 2 3 [ 0.036892] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.5.6-300.fc39.x86_64 root=/dev/nvme0n1p1 [ 0.036924] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.5.6-300.fc39.x86_64", will be passed to user space. [ 0.036948] random: crng init done [ 0.038240] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038961] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.039019] Fallback order for Node 0: 0 [ 0.039023] Built 1 zonelists, mobility grouping on. Total pages: 2044282 [ 0.039024] Policy zone: Normal [ 0.039392] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.039399] software IO TLB: area num 4. [ 0.089945] Memory: 7989940K/8307564K available (18432K kernel code, 3276K rwdata, 14436K rodata, 4508K init, 17396K bss, 317364K reserved, 0K cma-reserved) [ 0.090136] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.090147] Kernel/User page tables isolation: enabled [ 0.090177] ftrace: allocating 53440 entries in 209 pages [ 0.097951] ftrace: allocated 209 pages with 4 groups [ 0.098675] Dynamic Preempt: voluntary [ 0.098699] rcu: Preemptible hierarchical RCU implementation. [ 0.098700] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.098701] Trampoline variant of Tasks RCU enabled. [ 0.098701] Rude variant of Tasks RCU enabled. [ 0.098702] Tracing variant of Tasks RCU enabled. [ 0.098702] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.098703] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.101264] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ 0.101449] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.101546] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.101568] spurious 8259A interrupt: IRQ7. [ 0.103275] Console: colour VGA+ 80x25 [ 0.103277] printk: console [tty0] enabled [ 0.113561] ACPI: Core revision 20230331 [ 0.113696] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.113784] APIC: Switch to symmetric I/O mode setup [ 0.113841] DMAR: Host address width 39 [ 0.113896] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.113957] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.114032] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.114091] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.114165] DMAR: RMRR base: 0x000000dbe97000 end: 0x000000dbea5fff [ 0.114224] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff [ 0.114284] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1 [ 0.114344] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.114401] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.115192] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.115250] x2apic enabled [ 0.115307] Switched APIC routing to cluster x2apic. [ 0.115783] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.120785] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e0509acae5, max_idle_ns: 440795351565 ns [ 0.120865] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.23 BogoMIPS (lpj=3192615) [ 0.120963] CPU0: Thermal monitoring enabled (TM1) [ 0.121045] process: using mwait in idle threads [ 0.121102] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.121161] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.121223] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.121298] Spectre V2 : Mitigation: Retpolines [ 0.121354] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.121428] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.121488] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.121547] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.121622] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.121698] MDS: Mitigation: Clear CPU buffers [ 0.121754] MMIO Stale Data: Unknown: No mitigations [ 0.121865] SRBDS: Mitigation: Microcode [ 0.121923] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.121996] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.122055] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.122114] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.122173] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.138948] Freeing SMP alternatives memory: 48K [ 0.139009] pid_max: default: 32768 minimum: 301 [ 0.139098] LSM: initializing lsm=lockdown,capability,yama,selinux,bpf,landlock,integrity [ 0.139184] Yama: becoming mindful. [ 0.139241] SELinux: Initializing. [ 0.139325] LSM support for eBPF active [ 0.139381] landlock: Up and running. [ 0.139458] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.139538] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.139916] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.140113] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.140185] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.140267] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.140349] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.140455] ... version: 3 [ 0.140509] ... bit width: 48 [ 0.140564] ... generic registers: 8 [ 0.140619] ... value mask: 0000ffffffffffff [ 0.140676] ... max period: 00007fffffffffff [ 0.140734] ... fixed-purpose events: 3 [ 0.140789] ... event mask: 00000007000000ff [ 0.140896] signal: max sigframe size: 1776 [ 0.140964] Estimated ratio of average max frequency by base frequency (times 1024): 1088 [ 0.141059] rcu: Hierarchical SRCU implementation. [ 0.141115] rcu: Max phase no-delay instances is 400. [ 0.141606] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.141713] smp: Bringing up secondary CPUs ... [ 0.141843] smpboot: x86: Booting SMP configuration: [ 0.141868] .... node #0, CPUs: #1 #2 #3 [ 0.143917] smp: Brought up 1 node, 4 CPUs [ 0.143991] smpboot: Max logical packages: 1 [ 0.144047] smpboot: Total of 4 processors activated (25540.92 BogoMIPS) [ 0.145145] devtmpfs: initialized [ 0.145145] x86/mm: Memory block size: 128MB [ 0.145903] ACPI: PM: Registering ACPI NVS region [mem 0xd6638000-0xd663efff] (28672 bytes) [ 0.145979] ACPI: PM: Registering ACPI NVS region [mem 0xdb3db000-0xdbc06fff] (8568832 bytes) [ 0.146165] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.146244] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.146349] pinctrl core: initialized pinctrl subsystem [ 0.146501] PM: RTC time: 20:39:45, date: 2025-03-24 [ 0.146902] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.147041] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.147104] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.147180] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.147422] thermal_sys: Registered thermal governor 'fair_share' [ 0.147423] thermal_sys: Registered thermal governor 'bang_bang' [ 0.147482] thermal_sys: Registered thermal governor 'step_wise' [ 0.147540] thermal_sys: Registered thermal governor 'user_space' [ 0.147607] cpuidle: using governor menu [ 0.147746] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.147865] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.147944] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.148024] PCI: Using configuration type 1 for base access [ 0.148123] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.148257] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.148319] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.151904] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.151966] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.152026] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.152086] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.152227] cryptd: max_cpu_qlen set to 1000 [ 0.152227] raid6: skipped pq benchmark and selected avx2x4 [ 0.152227] raid6: using avx2x2 recovery algorithm [ 0.152227] ACPI: Added _OSI(Module Device) [ 0.152227] ACPI: Added _OSI(Processor Device) [ 0.152227] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152227] ACPI: Added _OSI(Processor Aggregator Device) [ 0.158385] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.159080] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.175955] ACPI: Dynamic OEM Table Load: [ 0.176016] ACPI: SSDT 0xFFFF8D4C80E5A400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.176516] ACPI: Dynamic OEM Table Load: [ 0.176574] ACPI: SSDT 0xFFFF8D4C812AC000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.177095] ACPI: Dynamic OEM Table Load: [ 0.177152] ACPI: SSDT 0xFFFF8D4C81253400 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.177924] ACPI: Interpreter enabled [ 0.177998] ACPI: PM: (supports S0 S1 S4 S5) [ 0.178055] ACPI: Using IOAPIC for interrupt routing [ 0.178465] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.178541] PCI: Using E820 reservations for host bridge windows [ 0.178716] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.184344] ACPI: \_TZ_.FN00: New power resource [ 0.184443] ACPI: \_TZ_.FN01: New power resource [ 0.184543] ACPI: \_TZ_.FN02: New power resource [ 0.184640] ACPI: \_TZ_.FN03: New power resource [ 0.184735] ACPI: \_TZ_.FN04: New power resource [ 0.185229] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.185293] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] PCI host bridge to bus 0000:00 [ 0.186201] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] pci_bus 0000:00: root bus resource [bus 00-3e] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ 0.187049] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000 [ 0.187113] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ 0.187525] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.187738] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.187943] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.188015] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.188239] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.188310] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.188565] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ 0.188636] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.188884] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.189009] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.189264] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.189389] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.189630] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400 [ 0.189756] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.190001] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.190073] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.190330] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100 [ 0.190537] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.190603] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff] pci 0000:00:1f.2: PME# supported from D3hot [ 0.191072] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.191142] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] pci 0000:01:00.0: [2646:5019] type 00 class 0x010802 [ 0.191477] pci 0000:01:00.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit] pci 0000:01:00.0: enabling Extended Tags [ 0.191880] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link) [ 0.192111] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.192370] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref] pci 0000:02:00.0: supports D1 D2 [ 0.192752] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.192974] pci 0000:00:1c.4: PCI bridge to [bus 02] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400 [ 0.193486] pci 0000:03:00.0: supports D1 D2 [ 0.193541] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196889] pci 0000:00:1c.5: PCI bridge to [bus 03-04] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] pci_bus 0000:04: extended config space not accessible [ 0.197145] pci 0000:04:00.0: [13f6:0111] type 00 class 0x040100 [ 0.197235] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff] pci 0000:04:00.0: supports D1 D2 [ 0.197604] pci 0000:03:00.0: PCI bridge to [bus 04] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.198326] ACPI: PCI: Interrupt link LNKB configured for IRQ 3 [ 0.198414] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.198501] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.198588] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.198654] ACPI: PCI: Interrupt link LNKE disabled [ 0.198736] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.198794] ACPI: PCI: Interrupt link LNKF disabled [ 0.198878] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.198964] ACPI: PCI: Interrupt link LNKH configured for IRQ 4 [ 0.199286] iommu: Default domain type: Translated [ 0.199286] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.199286] SCSI subsystem initialized [ 0.199286] libata version 3.00 loaded. [ 0.199286] ACPI: bus type USB registered [ 0.199286] usbcore: registered new interface driver usbfs [ 0.199286] usbcore: registered new interface driver hub [ 0.199286] usbcore: registered new device driver usb [ 0.199286] pps_core: LinuxPPS API ver. 1 registered [ 0.199865] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.199941] PTP clock support registered [ 0.200006] EDAC MC: Ver: 3.0.0 [ 0.200031] NetLabel: Initializing [ 0.200085] NetLabel: domain hash size = 128 [ 0.200141] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.200209] NetLabel: unlabeled traffic allowed by default [ 0.200268] mctp: management component transport protocol core [ 0.200326] NET: Registered PF_MCTP protocol family [ 0.200385] PCI: Using ACPI for IRQ routing [ 0.201928] PCI: pci_cache_line_size set to 64 bytes [ 0.201969] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] e820: reserve RAM buffer [mem 0xd6638000-0xd7ffffff] e820: reserve RAM buffer [mem 0xdb133000-0xdbffffff] e820: reserve RAM buffer [mem 0xdb3db000-0xdbffffff] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.201986] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.201986] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.202063] vgaarb: loaded [ 0.202118] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.202118] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.203885] clocksource: Switched to clocksource tsc-early [ 0.204049] VFS: Disk quotas dquot_6.6.0 [ 0.204110] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.204221] pnp: PnP ACPI init [ 0.204327] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.204492] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.204552] system 00:01: [io 0xffff] has been reserved [ 0.204610] system 00:01: [io 0xffff] has been reserved [ 0.204669] system 00:01: [io 0xffff] has been reserved [ 0.204726] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ 0.204786] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ 0.204845] system 00:01: [io 0x1e00-0x1efe] has been reserved [ 0.204888] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ 0.204948] system 00:01: [io 0x1800-0x18fe] has been reserved [ 0.205005] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.205114] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.205207] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.205514] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.205576] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.205636] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.205696] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.205756] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.205816] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.205877] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.205938] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.205998] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.206059] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.206120] system 00:05: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.206180] system 00:05: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.206368] pnp: PnP ACPI: found 6 devices [ 0.211857] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.211984] NET: Registered PF_INET protocol family [ 0.212177] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.213693] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.213783] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.213871] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.214074] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.214509] TCP: Hash tables configured (established 65536 bind 65536) [ 0.214628] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.214716] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.214799] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.214923] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.214987] NET: Registered PF_XDP protocol family [ 0.215054] pci 0000:00:1c.0: PCI bridge to [bus 01] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff] pci 0000:00:1c.4: PCI bridge to [bus 02] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] pci 0000:03:00.0: PCI bridge to [bus 04] pci 0000:03:00.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.5: PCI bridge to [bus 03-04] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7d0 took 15991 usecs [ 0.249467] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7d0 took 15543 usecs [ 0.249561] pci 0000:03:00.0: Disabling ASPM L0s/L1 [ 0.249626] PCI: CLS 64 bytes, default 64 [ 0.249695] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.249717] Trying to unpack rootfs image as initramfs... [ 0.249754] software IO TLB: mapped [mem 0x00000000d7133000-0x00000000db133000] (64MB) [ 0.250436] Initialise system trusted keyrings [ 0.250501] Key type blacklist registered [ 0.250588] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.250667] zbud: loaded [ 0.251041] integrity: Platform Keyring initialized [ 0.251100] integrity: Machine keyring initialized [ 0.257998] NET: Registered PF_ALG protocol family [ 0.258057] xor: automatically using best checksumming function avx [ 0.258118] Key type asymmetric registered [ 0.258173] Asymmetric key parser 'x509' registered [ 0.608173] Freeing initrd memory: 38128K [ 0.611652] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.611763] io scheduler mq-deadline registered [ 0.611822] io scheduler kyber registered [ 0.611888] io scheduler bfq registered [ 0.613230] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.613664] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 [ 0.613877] pcieport 0000:00:1c.4: PME: Signaling with IRQ 27 [ 0.614071] pcieport 0000:00:1c.5: PME: Signaling with IRQ 28 [ 0.614218] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.614550] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.614646] ACPI: button: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.614842] ACPI: button: Power Button [PWRF] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.615321] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.615532] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.615591] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.615764] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.617326] Non-volatile memory driver v1.3 [ 0.617391] Linux agpgart interface v0.103 [ 0.617544] ACPI: bus type drm_connector registered [ 0.618024] ahci 0000:00:1f.2: version 3.0 [ 0.618142] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode [ 0.618218] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems [ 0.620868] scsi host0: ahci [ 0.621049] scsi host1: ahci [ 0.621196] scsi host2: ahci [ 0.621332] scsi host3: ahci [ 0.621475] scsi host4: ahci [ 0.621554] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 29 [ 0.621629] ata2: DUMMY [ 0.621682] ata3: DUMMY [ 0.621735] ata4: DUMMY [ 0.621788] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 29 [ 0.622208] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.622307] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.623463] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.623663] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.623679] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.623798] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.623839] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.623910] ehci-pci 0000:00:1d.0: debug port 2 [ 0.623970] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.624172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.624296] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.624422] usb usb1: Product: xHCI Host Controller [ 0.624515] usb usb1: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd [ 0.624611] usb usb1: SerialNumber: ... [ 0.624879] hub 1-0:1.0: USB hub found [ 0.624996] hub 1-0:1.0: 10 ports detected [ 0.626410] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 0.626546] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.626665] usb usb3: Product: xHCI Host Controller [ 0.626750] usb usb3: Manufacturer: Linux 6.5.6-300.fc39.x86_64 xhci-hcd [ 0.626845] usb usb3: SerialNumber: ... [ 0.627061] hub 3-0:1.0: USB hub found [ 0.627149] hub 3-0:1.0: 2 ports detected [ 0.627452] usbcore: registered new interface driver usbserial_generic [ 0.627551] usbserial: USB Serial support registered for generic [ 0.627663] i8042: PNP: No PS/2 controller found. [ 0.627790] mousedev: PS/2 mouse device common for all mice [ 0.627935] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000 [ 0.627991] rtc_cmos 00:02: RTC can wake from S4 [ 0.628266] rtc_cmos 00:02: registered as rtc0 [ 0.628350] rtc_cmos 00:02: setting system clock to 2025-03-24T20:39:46 UTC (1742848786) [ 0.628475] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ 0.628641] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.628733] device-mapper: uevent: version 1.0.3 [ 0.628827] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 0.628972] intel_pstate: Intel P-state driver initializing [ 0.629620] hid: raw HID events driver (C) Jiri Kosina [ 0.629708] usbcore: registered new interface driver usbhid [ 0.629771] usbhid: USB HID core driver [ 0.629934] drop_monitor: Initializing network drop monitor service [ 0.634427] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.634546] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.634630] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.634702] usb usb2: Product: EHCI Host Controller [ 0.634759] usb usb2: Manufacturer: Linux 6.5.6-300.fc39.x86_64 ehci_hcd [ 0.634818] usb usb2: SerialNumber: ... [ 0.635021] hub 2-0:1.0: USB hub found [ 0.635079] hub 2-0:1.0: 2 ports detected [ 0.635260] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.635365] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 4 [ 0.635458] ehci-pci 0000:00:1a.0: debug port 2 [ 0.639447] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000 [ 0.641767] Initializing XFRM netlink socket [ 0.641849] NET: Registered PF_INET6 protocol family [ 0.645985] Segment Routing with IPv6 [ 0.646042] RPL Segment Routing with IPv6 [ 0.646104] In-situ OAM (IOAM) with IPv6 [ 0.646175] mip6: Mobile IPv6 [ 0.646239] NET: Registered PF_PACKET protocol family [ 0.646859] microcode: Microcode Update Driver: v2.2. [ 0.646865] IPI shorthand broadcast: enabled [ 0.646984] AVX2 version of gcm_enc/dec engaged. [ 0.647101] AES CTR mode by8 optimization enabled [ 0.647395] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.647506] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 0.647590] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 0.647664] usb usb4: Product: EHCI Host Controller [ 0.647722] usb usb4: Manufacturer: Linux 6.5.6-300.fc39.x86_64 ehci_hcd [ 0.647783] usb usb4: SerialNumber: ... [ 0.648003] hub 4-0:1.0: USB hub found [ 0.648064] hub 4-0:1.0: 2 ports detected [ 0.648783] sched_clock: Marking stable (635000842, 13386612)->(650515814, -2128360) [ 0.648991] registered taskstats version 1 [ 0.649247] Loading compiled-in X.509 certificates [ 0.657792] Loaded X.509 cert 'Fedora kernel signing key: 8096e35cbead41f260211fbb6aa9a067f06b8413' [ 0.659853] page_owner is disabled [ 0.660029] Key type .fscrypt registered [ 0.660084] Key type fscrypt-provisioning registered [ 0.660542] Btrfs loaded, zoned=yes, fsverity=yes [ 0.660623] Key type big_key registered [ 0.663987] Key type encrypted registered [ 0.664049] ima: No TPM chip found, activating TPM-bypass! [ 0.664109] Loading compiled-in module X.509 certificates [ 0.664678] Loaded X.509 cert 'Fedora kernel signing key: 8096e35cbead41f260211fbb6aa9a067f06b8413' [ 0.664757] ima: Allocated hash algorithm: sha256 [ 0.664822] ima: No architecture policies found [ 0.664887] evm: Initialising EVM extended attributes: [ 0.664944] evm: security.selinux [ 0.664998] evm: security.SMACK64 (disabled) [ 0.665055] evm: security.SMACK64EXEC (disabled) [ 0.665111] evm: security.SMACK64TRANSMUTE (disabled) [ 0.665169] evm: security.SMACK64MMAP (disabled) [ 0.665226] evm: security.apparmor (disabled) [ 0.665282] evm: security.ima [ 0.665335] evm: security.capability [ 0.665852] evm: HMAC attrs: 0x1 [ 0.709699] alg: No test for 842 (842-scomp) [ 0.709776] alg: No test for 842 (842-generic) [ 0.809210] PM: Magic number: 1:42:701 [ 0.811953] RAS: Correctable Errors collector initialized. [ 0.812054] clk: Disabling unused clocks [ 0.868448] usb 1-3: new low-speed USB device number 2 using xhci_hcd [ 0.876452] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.884453] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 0.928452] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.928536] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.929093] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20230331/psargs-330) [ 0.929190] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 0.929447] ata5.00: HPA detected: current 976771055, native 976773168 [ 0.929559] ata5.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133 [ 0.930063] ata5.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.931019] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20230331/psargs-330) [ 0.931184] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 0.931685] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100 [ 0.931991] ata5.00: configured for UDMA/133 [ 0.935662] ata1.00: configured for UDMA/100 [ 0.941147] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5 [ 0.957187] sr 0:0:0:0: [sr0] scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.957275] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.971126] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.971249] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.971607] scsi 4:0:0:0: Direct-Access ATA TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5 [ 0.971920] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 0.971961] sd 4:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/466 GiB) [ 0.972084] sd 4:0:0:0: [sda] 4096-byte physical blocks [ 0.972181] sd 4:0:0:0: [sda] Write Protect is off [ 0.972254] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.972282] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.972417] sd 4:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 0.997908] usb 1-3: New USB device found, idVendor=89e5, idProduct=101b, bcdDevice= 1.00 [ 0.998008] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 0.998082] usb 1-3: Product: USB OPTICAL MOUSE [ 1.001800] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:89E5:101B.0001/input/input2 [ 1.002577] hid-generic 0003:89E5:101B.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-3/input0 [ 1.005121] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.005251] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.006047] hub 2-1:1.0: USB hub found [ 1.006413] hub 2-1:1.0: 6 ports detected [ 1.008832] sda: sda1 sda2 sda3 [ 1.009423] sd 4:0:0:0: [sda] Attached SCSI disk [ 1.012857] usb 4-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.012994] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 1.013772] hub 4-1:1.0: USB hub found [ 1.013963] hub 4-1:1.0: 4 ports detected [ 1.014089] Freeing unused decrypted memory: 2036K [ 1.015786] Freeing unused kernel image (initmem) memory: 4508K [ 1.015993] Write protecting the kernel read-only data: 34816k [ 1.017296] Freeing unused kernel image (rodata/data gap) memory: 1948K [ 1.114336] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.114402] x86/mm: Checking user space page tables [ 1.116413] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 1.154634] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.154695] Run /init as init process [ 1.154750] with arguments: [ 1.154751] /init [ 1.154751] with environment: [ 1.154752] HOME=/ [ 1.154752] TERM=linux [ 1.154753] BOOT_IMAGE=/boot/vmlinuz-6.5.6-300.fc39.x86_64 [ 1.242595] usb 1-5: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00 [ 1.242676] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.242739] usb 1-5: Product: USB2.0 HUB [ 1.243477] hub 1-5:1.0: USB hub found [ 1.243596] hub 1-5:1.0: 4 ports detected [ 1.298443] tsc: Refined TSC clocksource calibration: 3192.607 MHz [ 1.298511] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0501eb3d1, max_idle_ns: 440795254769 ns [ 1.298620] clocksource: Switched to clocksource tsc [ 1.333758] fuse: init (API version 7.38) [ 1.358405] usb 1-6: new high-speed USB device number 4 using xhci_hcd [ 1.487077] usb 1-6: New USB device found, idVendor=2357, idProduct=011e, bcdDevice= 2.00 [ 1.487159] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.487220] usb 1-6: Product: 802.11ac WLAN Adapter [ 1.487278] usb 1-6: Manufacturer: Realtek [ 1.487334] usb 1-6: SerialNumber: ... [ 1.550411] usb 1-5.2: new high-speed USB device number 5 using xhci_hcd [ 1.629096] usb 1-5.2: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00 [ 1.629174] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.629247] usb 1-5.2: Product: Ultra USB 3.0 [ 1.629302] usb 1-5.2: Manufacturer: SanDisk [ 1.629358] usb 1-5.2: SerialNumber: ... [ 1.703601] r8169 0000:02:00.0 eth0: RTL8168g/8111g, C5907544819341F5560BA4782625A129, XID 4c0, IRQ 31 [ 1.703657] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] nvme nvme0: pci function 0000:01:00.0 [ 1.710045] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 1.740485] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.743428] usb 1-8: new low-speed USB device number 6 using xhci_hcd [ 1.771202] nvme nvme0: 4/0/0 default/read/poll queues [ 1.774194] nvme0n1: p1 p2 p3 p4 [ 1.876757] usb 1-8: New USB device found, idVendor=2a7a, idProduct=959f, bcdDevice= 0.01 [ 1.876814] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=... [ 1.876863] usb 1-8: Product: CASUE USB KB [ 1.882142] input: CASUE USB KB as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:2A7A:959F.0002/input/input3 [ 1.953429] usb 1-5.4: new high-speed USB device number 7 using xhci_hcd [ 1.953564] hid-generic 0003:2A7A:959F.0002: input,hidraw1: USB HID v1.10 Keyboard [CASUE USB KB] on usb-0000:00:14.0-8/input0 [ 1.960210] input: CASUE USB KB Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:2A7A:959F.0003/input/input4 [ 2.011563] input: CASUE USB KB System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:2A7A:959F.0003/input/input5 [ 2.011819] hid-generic 0003:2A7A:959F.0003: input,hidraw2: USB HID v1.10 Device [CASUE USB KB] on usb-0000:00:14.0-8/input1 [ 2.037348] usb 1-5.4: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.00 [ 2.037457] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.037529] usb 1-5.4: Product: Mass Storage [ 2.037585] usb 1-5.4: Manufacturer: Generic [ 2.037641] usb 1-5.4: SerialNumber: ... [ 2.287495] usb-storage 1-5.2:1.0: USB Mass Storage device detected [ 2.287886] scsi host5: usb-storage 1-5.2:1.0 [ 2.288000] usb-storage 1-5.4:1.0: USB Mass Storage device detected [ 2.288141] scsi host6: usb-storage 1-5.4:1.0 [ 2.288235] usbcore: registered new interface driver usb-storage [ 2.289157] i915 0000:00:02.0: [drm] PipeC fused off [ 2.289384] i915 0000:00:02.0: vgaarb: deactivate vga console [ 2.289869] Console: switching to colour dummy device 80x25 [ 2.290737] usbcore: registered new interface driver uas [ 2.293702] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.314064] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 2.315058] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.315231] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 2.352501] fbcon: i915drmfb (fb0) is primary device [ 2.457403] Console: switching to colour frame buffer device 160x45 [ 2.475441] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 3.347278] scsi 5:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 [ 3.347573] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 3.347787] sd 5:0:0:0: [sdb] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 3.348102] sd 5:0:0:0: [sdb] Write Protect is off [ 3.348115] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 3.348578] scsi 6:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 3.348698] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.348860] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 3.349451] sd 6:0:0:0: [sdc] 61849600 512-byte logical blocks: (31.7 GB/29.5 GiB) [ 3.350718] sd 6:0:0:0: [sdc] Write Protect is off [ 3.350730] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 3.351243] sdb: sdb1 [ 3.351312] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 3.351429] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.354861] sdc: [ 3.354883] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 4.059265] EXT4-fs (nvme0n1p1): orphan cleanup on readonly fs [ 4.059949] EXT4-fs (nvme0n1p1): mounted filesystem HASH_B88-3B6B-B990-037A-87DF2E6D1D85 ro with ordered data mode. Quota mode: none. [ 4.589392] SELinux: policy capability network_peer_controls=1 [ 4.589717] SELinux: policy capability open_perms=1 [ 4.590016] SELinux: policy capability extended_socket_class=1 [ 4.590314] SELinux: policy capability always_check_network=0 [ 4.590615] SELinux: policy capability cgroup_seclabel=1 [ 4.590913] SELinux: policy capability nnp_nosuid_transition=1 [ 4.591205] SELinux: policy capability genfs_seclabel_symlinks=1 [ 4.591499] SELinux: policy capability ioctl_skip_cloexec=0 [ 4.968575] zram: Added device: zram0 [ 5.243111] loop: module loaded [ 5.272455] EXT4-fs (nvme0n1p1): re-mounted HASH_B88-3B6B-B990-037A-87DF2E6D1D85 r/w. Quota mode: none. [ 5.580302] zram0: detected capacity change from 0 to 16072704 [ 5.666042] Adding 8036348k swap on /dev/zram0. Priority:100 extents:1 across:8036348k SSDscFS [ 5.773401] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20230331/utaddress-204) [ 5.774337] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 5.777201] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230331/utaddress-204) [ 5.778157] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 5.792792] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20230331/utaddress-204) [ 5.798525] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 5.799591] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230331/utaddress-204) [ 5.800557] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 5.806591] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20230331/utaddress-204) [ 5.812477] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230331/utaddress-204) [ 5.813504] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 5.813984] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 5.816110] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 5.816594] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.818381] i2c i2c-6: 1/4 memory slots populated (from DMI) [ 5.826972] i2c i2c-6: Successfully instantiated SPD at 0x52 [ 5.898019] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 5.898462] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 5.898891] RAPL PMU: hw unit of domain package 2^-14 Joules [ 5.899314] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 5.899745] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 5.944215] iTCO_vendor_support: vendor-support=0 [ 5.976604] at24 6-0052: supply vcc not found, using dummy regulator [ 5.978159] at24 6-0052: 256 byte spd EEPROM, read-only [ 5.981379] RPC: Registered named UNIX socket transport module. [ 5.981841] RPC: Registered udp transport module. [ 5.982252] RPC: Registered tcp transport module. [ 5.982698] RPC: Registered tcp-with-tls transport module. [ 5.983114] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.989871] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ 6.000066] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 6.142445] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 6.150987] intel_rapl_common: Found RAPL domain package [ 6.151362] intel_rapl_common: Found RAPL domain core [ 6.151739] intel_rapl_common: Found RAPL domain uncore [ 6.152067] intel_rapl_common: Found RAPL domain dram [ 6.152371] intel_rapl_common: package-0:package:long_term locked by BIOS [ 6.152676] intel_rapl_common: package-0:package:short_term locked by BIOS [ 6.161251] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input8 [ 6.161613] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input9 [ 6.161943] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input10 [ 6.194688] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 6.194993] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 6.195279] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 6.195637] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0 [ 6.195982] snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0 [ 6.195983] snd_hda_codec_realtek hdaudioC2D0: inputs: [ 6.195984] snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19 [ 6.195985] snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18 [ 6.195986] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a [ 6.216454] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input11 [ 6.216803] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input12 [ 6.217126] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card2/input13 [ 6.356867] dbus-broker-lau[769]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 6.582280] NET: Registered PF_QIPCRTR protocol family [ 6.936408] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) [ 7.095349] r8169 0000:02:00.0 enp2s0: Link is Down [ 8.585158] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 8.590171] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 8.592742] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 9.188478] ata5.00: exception Emask 0x50 SAct 0x41 SErr 0x4090800 action 0xe frozen [ 9.189747] ata5.00: irq_stat 0x00400040, connection status changed [ 9.190962] ata5: SError: { HostInt PHYRdyChg 10B8B DevExch } [ 9.192167] ata5.00: failed command: READ FPDMA QUEUED [ 9.193352] ata5.00: cmd 60/08:00:00:8c:1a/00:00:06:00:00/40 tag 0 ncq dma 4096 in res 50/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [ 9.195769] ata5.00: status: { DRDY } [ 9.196977] ata5.00: failed command: READ FPDMA QUEUED [ 9.198194] ata5.00: cmd 60/08:30:00:28:6a/00:00:18:00:00/40 tag 6 ncq dma 4096 in res 50/00:00:00:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error) [ 9.200664] ata5.00: status: { DRDY } [ 9.201908] ata5: hard resetting link [ 10.079519] ata5: SATA link down (SStatus 0 SControl 300) [ 11.368493] ata5: hard resetting link [ 12.149515] ata5: SATA link down (SStatus 0 SControl 300) [ 12.150791] ata5: limiting SATA link speed to <unknown> [ 13.477794] ata5: hard resetting link [ 18.257516] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 3F0) [ 18.259517] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20230331/psargs-330) [ 18.260853] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 18.263215] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20230331/psargs-330) [ 18.264582] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 18.266243] ata5.00: configured for UDMA/133 [ 18.269147] sd 4:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=12s [ 18.270496] sd 4:0:0:0: [sda] tag#0 Sense Key : Illegal Request [current] sd 4:0:0:0: [sda] tag#0 Add. Sense: Unaligned write command [ 18.273124] sd 4:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 06 1a 8c 00 00 00 08 00 [ 18.274413] I/O error, dev sda, sector 102403072 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 18.275728] sd 4:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=12s [ 18.277027] sd 4:0:0:0: [sda] tag#6 Sense Key : Illegal Request [current] sd 4:0:0:0: [sda] tag#6 Add. Sense: Unaligned write command [ 18.279593] sd 4:0:0:0: [sda] tag#6 CDB: Read(10) 28 00 18 6a 28 00 00 00 08 00 [ 18.280863] I/O error, dev sda, sector 409610240 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 18.281940] ata5: EH complete [ 19.299467] ata5: SATA link down (SStatus 0 SControl 3F0) [ 24.968673] ata5: SATA link down (SStatus 0 SControl 3F0) [ 24.970036] ata5: limiting SATA link speed to <unknown> [ 30.600665] ata5: SATA link down (SStatus 0 SControl 3E0) [ 30.602037] ata5.00: disable device [ 30.603425] sd 4:0:0:0: rejecting I/O to offline device [ 30.603502] I/O error, dev sda, sector 102406144 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 30.604354] I/O error, dev sda, sector 2056 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 30.605331] I/O error, dev sda, sector 501762032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 30.606176] I/O error, dev sda, sector 102406144 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 30.607018] I/O error, dev sda, sector 2056 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 30.607858] Buffer I/O error on dev sda2, logical block 512, async page read [ 30.608702] Buffer I/O error on dev sda1, logical block 1, async page read [ 30.609563] ata5.00: detaching (SCSI 4:0:0:0) [ 30.610406] I/O error, dev sda, sector 501762032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 30.612052] Buffer I/O error on dev sda3, logical block 11519998, async page read [ 30.644494] sd 4:0:0:0: [sda] Synchronizing SCSI cache [ 30.644889] sd 4:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 30.645248] sd 4:0:0:0: [sda] Stopping disk [ 30.645615] sd 4:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 34.029886] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 59.037177] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 84.031588] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 91.396378] zram0: detected capacity change from 16072704 to 0 [ 91.607420] watchdog: watchdog0: watchdog did not stop!