[ 0.000000] microcode: updated early: 0x424 -> 0x430, date = 2023-06-07 [ 0.000000] Linux version 6.5.6-76060506-generic (XXX@XXX) (x86_64-linux-gnu-gcc-12 (Ubuntu 12.3.0-1ubuntu1~22.04) 12.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #202310061235~1697396945~22.04~9283e32 SMP PREEMPT_DYNAMIC Sun O [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003471bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000003471c000-0x000000003531bfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003531c000-0x000000003c9a0fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003c9a1000-0x000000003faa0fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003faa1000-0x000000003fba9fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003fbaa000-0x000000003fcc2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003fcc3000-0x0000000042efefff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000042eff000-0x0000000042efffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000042f00000-0x0000000048ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000049e00000-0x000000004f7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000010b07fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0x33b9c018-0x33bc0a57] usable ==> usable [ 0.000000] e820: update [mem 0x33b9c018-0x33bc0a57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000033b9c017] usable [ 0.000000] reserve setup_data: [mem 0x0000000033b9c018-0x0000000033bc0a57] usable [ 0.000000] reserve setup_data: [mem 0x0000000033bc0a58-0x000000003471bfff] usable [ 0.000000] reserve setup_data: [mem 0x000000003471c000-0x000000003531bfff] reserved [ 0.000000] reserve setup_data: [mem 0x000000003531c000-0x000000003c9a0fff] usable [ 0.000000] reserve setup_data: [mem 0x000000003c9a1000-0x000000003faa0fff] reserved [ 0.000000] reserve setup_data: [mem 0x000000003faa1000-0x000000003fba9fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000003fbaa000-0x000000003fcc2fff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x000000003fcc3000-0x0000000042efefff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000042eff000-0x0000000042efffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000042f00000-0x0000000048ffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000049e00000-0x000000004f7fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000010b07fffff] usable [ 0.000000] efi: EFI v2.8 by American Megatrends [ 0.000000] efi: ACPI=0x3fba9000 ACPI 2.0=0x3fba9014 SMBIOS=0x42b7e000 SMBIOS 3.0=0x42b7d000 MEMATTR=0x38d76018 ESRT=0x3952e018 INITRD=0x345fff18 RNG=0x3fada018 [ 0.000000] random: crng init done [ 0.000000] efi: Remove mem75: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map [ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved [ 0.000000] efi: Not removing mem76: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map [ 0.000000] efi: Not removing mem77: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem78: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem80: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map [ 0.000000] efi: Remove mem81: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved [ 0.000000] SMBIOS 3.5.0 present. [ 0.000000] DMI: Micro-Star International Co., Ltd. Cyborg 15 A12VF/MS-15K1, BIOS E15K1IMS.30E 09/04/2023 [ 0.000000] tsc: Detected 2500.000 MHz processor [ 0.000000] tsc: Detected 2496.000 MHz TSC [ 0.000957] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000959] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000965] last_pfn = 0x10b0800 max_arch_pfn = 0x400000000 [ 0.000968] MTRR map: 5 entries (3 fixed + 2 variable; max 23), built from 10 variable MTRRs [ 0.000970] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001460] last_pfn = 0x42f00 max_arch_pfn = 0x400000000 [ 0.012867] esrt: Reserving ESRT space from 0x000000003952e018 to 0x000000003952e0c8. [ 0.012872] e820: update [mem 0x3952e000-0x3952efff] usable ==> reserved [ 0.012887] Using GB pages for direct mapping [ 0.012887] Incomplete global flushes, disabling PCID [ 0.013156] Secure boot disabled [ 0.013156] RAMDISK: [mem 0x283c3000-0x2f6fffff] ACPI: Early table checksum verification disabled [ 0.013164] ACPI: RSDP 0x000000003FBA9014 000024 (v02 MSI_NB) [ 0.013167] ACPI: XSDT 0x000000003FBA8728 000124 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013172] ACPI: FACP 0x000000003FBA2000 000114 (v06 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013176] ACPI: DSDT 0x000000003FB14000 08D6E1 (v02 MSI_NB MEGABOOK 01072009 INTL 20200717) [ 0.013178] ACPI: FACS 0x000000003FCC2000 000040 [ 0.013180] ACPI: SSDT 0x000000003FBA3000 00457B (v02 DptfTb DptfTabl 00001000 INTL 20200717) [ 0.013183] ACPI: FIDT 0x000000003FB13000 00009C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.013185] ACPI: MSDM 0x000000003FB12000 000055 (v03 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013187] ACPI: SLIC 0x000000003FB11000 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013189] ACPI: SSDT 0x000000003FB10000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20200717) [ 0.013191] ACPI: SSDT 0x000000003FB0F000 000066 (v02 MSI_NB MsiNvs 00003000 INTL 20200717) [ 0.013193] ACPI: SSDT 0x000000003FB09000 005D34 (v02 CpuRef CpuSsdt 00003000 INTL 20200717) [ 0.013196] ACPI: SSDT 0x000000003FB06000 002935 (v02 SaSsdt SaSsdt 00003000 INTL 20200717) [ 0.013198] ACPI: SSDT 0x000000003FB02000 0033E9 (v02 INTEL IgfxSsdt 00003000 INTL 20200717) [ 0.013200] ACPI: HPET 0x000000003FB01000 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013202] ACPI: APIC 0x000000003FB00000 0001DC (v05 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013204] ACPI: MCFG 0x000000003FAFF000 00003C (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013206] ACPI: SSDT 0x000000003FAF7000 0078D9 (v02 MSI_NB AdlP_Rvp 00001000 INTL 20200717) [ 0.013208] ACPI: UEFI 0x000000003FC46000 000048 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013210] ACPI: LPIT 0x000000003FAF6000 0000CC (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013213] ACPI: SSDT 0x000000003FAF2000 002A83 (v02 MSI_NB PtidDevc 00001000 INTL 20200717) [ 0.013215] ACPI: SSDT 0x000000003FAEF000 002357 (v02 MSI_NB TbtTypeC 00000000 INTL 20200717) [ 0.013217] ACPI: DBGP 0x000000003FAEE000 000034 (v01 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013219] ACPI: DBG2 0x000000003FAED000 000054 (v00 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013221] ACPI: SSDT 0x000000003FAEB000 00190A (v02 MSI_NB UsbCTabl 00001000 INTL 20200717) [ 0.013223] ACPI: NHLT 0x000000003FAEA000 000F4E (v00 MSI_NB MEGABOOK 01072009 AMI 01000013) [ 0.013226] ACPI: DMAR 0x000000003FAE9000 000088 (v02 INTEL EDK2 00000002 01000013) [ 0.013228] ACPI: FPDT 0x000000003FAE8000 000044 (v01 MSI_NB A M I 01072009 AMI 01000013) [ 0.013230] ACPI: SSDT 0x000000003FAE7000 000A77 (v02 INTEL xh_adlLP 00000000 INTL 20200717) [ 0.013232] ACPI: SSDT 0x000000003FAE3000 003AEA (v02 SocGpe SocGpe 00003000 INTL 20200717) [ 0.013234] ACPI: SSDT 0x000000003FADF000 0039DA (v02 SocCmn SocCmn 00003000 INTL 20200717) [ 0.013236] ACPI: SSDT 0x000000003FADE000 000144 (v02 Intel ADebTabl 00001000 INTL 20200717) [ 0.013238] ACPI: BGRT 0x000000003FADD000 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.013240] ACPI: PHAT 0x000000003FADC000 0005D1 (v01 MSI_NB MEGABOOK 00000005 MSFT 0100000D) [ 0.013243] ACPI: WSMT 0x000000003FAF5000 000028 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.013245] ACPI: BGRT 0x000000003FADB000 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013) [ 0.013246] ACPI: Reserving FACP table memory at [mem 0x3fba2000-0x3fba2113] ACPI: Reserving DSDT table memory at [mem 0x3fb14000-0x3fba16e0] ACPI: Reserving FACS table memory at [mem 0x3fcc2000-0x3fcc203f] ACPI: Reserving SSDT table memory at [mem 0x3fba3000-0x3fba757a] ACPI: Reserving FIDT table memory at [mem 0x3fb13000-0x3fb1309b] ACPI: Reserving MSDM table memory at [mem 0x3fb12000-0x3fb12054] ACPI: Reserving SLIC table memory at [mem 0x3fb11000-0x3fb11175] ACPI: Reserving SSDT table memory at [mem 0x3fb10000-0x3fb1038b] ACPI: Reserving SSDT table memory at [mem 0x3fb0f000-0x3fb0f065] ACPI: Reserving SSDT table memory at [mem 0x3fb09000-0x3fb0ed33] ACPI: Reserving SSDT table memory at [mem 0x3fb06000-0x3fb08934] ACPI: Reserving SSDT table memory at [mem 0x3fb02000-0x3fb053e8] ACPI: Reserving HPET table memory at [mem 0x3fb01000-0x3fb01037] ACPI: Reserving APIC table memory at [mem 0x3fb00000-0x3fb001db] ACPI: Reserving MCFG table memory at [mem 0x3faff000-0x3faff03b] ACPI: Reserving SSDT table memory at [mem 0x3faf7000-0x3fafe8d8] ACPI: Reserving UEFI table memory at [mem 0x3fc46000-0x3fc46047] ACPI: Reserving LPIT table memory at [mem 0x3faf6000-0x3faf60cb] ACPI: Reserving SSDT table memory at [mem 0x3faf2000-0x3faf4a82] ACPI: Reserving SSDT table memory at [mem 0x3faef000-0x3faf1356] ACPI: Reserving DBGP table memory at [mem 0x3faee000-0x3faee033] ACPI: Reserving DBG2 table memory at [mem 0x3faed000-0x3faed053] ACPI: Reserving SSDT table memory at [mem 0x3faeb000-0x3faec909] ACPI: Reserving NHLT table memory at [mem 0x3faea000-0x3faeaf4d] ACPI: Reserving DMAR table memory at [mem 0x3fae9000-0x3fae9087] ACPI: Reserving FPDT table memory at [mem 0x3fae8000-0x3fae8043] ACPI: Reserving SSDT table memory at [mem 0x3fae7000-0x3fae7a76] ACPI: Reserving SSDT table memory at [mem 0x3fae3000-0x3fae6ae9] ACPI: Reserving SSDT table memory at [mem 0x3fadf000-0x3fae29d9] ACPI: Reserving SSDT table memory at [mem 0x3fade000-0x3fade143] ACPI: Reserving BGRT table memory at [mem 0x3fadd000-0x3fadd037] ACPI: Reserving PHAT table memory at [mem 0x3fadc000-0x3fadc5d0] ACPI: Reserving WSMT table memory at [mem 0x3faf5000-0x3faf5027] ACPI: Reserving BGRT table memory at [mem 0x3fadb000-0x3fadb037] No NUMA configuration found [ 0.013450] Faking a node at [mem 0x0000000000000000-0x00000010b07fffff] NODE_DATA(0) allocated [mem 0x10b07d5000-0x10b07fffff] Zone ranges: [ 0.013586] DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] Normal [mem 0x0000000100000000-0x00000010b07fffff] Device empty [ 0.013589] Movable zone start for each node [ 0.013590] Early memory node ranges [ 0.013590] node 0: [mem 0x0000000000001000-0x000000000009dfff] node 0: [mem 0x000000000009f000-0x000000000009ffff] node 0: [mem 0x0000000000100000-0x000000003471bfff] node 0: [mem 0x000000003531c000-0x000000003c9a0fff] node 0: [mem 0x0000000042eff000-0x0000000042efffff] node 0: [mem 0x0000000100000000-0x00000010b07fffff] Initmem setup node 0 [mem 0x0000000000001000-0x00000010b07fffff] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013600] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.013613] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.014506] On node 0, zone DMA32: 3072 pages in unavailable ranges [ 0.014636] On node 0, zone DMA32: 25950 pages in unavailable ranges [ 0.076010] On node 0, zone Normal: 20736 pages in unavailable ranges [ 0.076154] On node 0, zone Normal: 30720 pages in unavailable ranges [ 0.076194] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff] ACPI: PM-Timer IO Port: 0x1808 [ 0.076586] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.076587] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.076588] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.076588] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.076589] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.076589] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.076590] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.076590] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.076590] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) [ 0.076591] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) [ 0.076591] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) [ 0.076592] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) [ 0.076592] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) [ 0.076592] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) [ 0.076593] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) [ 0.076593] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) [ 0.076594] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) [ 0.076594] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) [ 0.076594] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) [ 0.076595] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) [ 0.076595] ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) [ 0.076596] ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) [ 0.076596] ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) [ 0.076596] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.076631] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.076633] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.076634] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.076636] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.076637] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.076642] e820: update [mem 0x344e3000-0x345d6fff] usable ==> reserved [ 0.076650] TSC deadline timer available [ 0.076651] smpboot: Allowing 12 CPUs, 0 hotplug CPUs [ 0.076661] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009efff] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] PM: hibernation: Registered nosave memory: [mem 0x33b9c000-0x33b9cfff] PM: hibernation: Registered nosave memory: [mem 0x33bc0000-0x33bc0fff] PM: hibernation: Registered nosave memory: [mem 0x344e3000-0x345d6fff] PM: hibernation: Registered nosave memory: [mem 0x3471c000-0x3531bfff] PM: hibernation: Registered nosave memory: [mem 0x3952e000-0x3952efff] PM: hibernation: Registered nosave memory: [mem 0x3c9a1000-0x3faa0fff] PM: hibernation: Registered nosave memory: [mem 0x3faa1000-0x3fba9fff] PM: hibernation: Registered nosave memory: [mem 0x3fbaa000-0x3fcc2fff] PM: hibernation: Registered nosave memory: [mem 0x3fcc3000-0x42efefff] PM: hibernation: Registered nosave memory: [mem 0x42f00000-0x48ffffff] PM: hibernation: Registered nosave memory: [mem 0x49000000-0x49dfffff] PM: hibernation: Registered nosave memory: [mem 0x49e00000-0x4f7fffff] PM: hibernation: Registered nosave memory: [mem 0x4f800000-0xfdffffff] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff] [mem 0x4f800000-0xfdffffff] available for PCI devices [ 0.076676] Booting paravirtualized kernel on bare hardware [ 0.076677] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.076682] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 [ 0.077085] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144 [ 0.077089] pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152 [ 0.077090] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- [ 0.077150] DMAR: IOMMU enabled [ 0.077182] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.081099] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.083067] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.083157] Fallback order for Node 0: 0 [ 0.083160] Built 1 zonelists, mobility grouping on. Total pages: 16435595 [ 0.083161] Policy zone: Normal [ 0.083164] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.083170] software IO TLB: area num 16. [ 0.162408] Memory: 65273816K/66786560K available (20480K kernel code, 4268K rwdata, 13116K rodata, 4780K init, 17404K bss, 1512484K reserved, 0K cma-reserved) [ 0.162548] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.162565] ftrace: allocating 55141 entries in 216 pages [ 0.167958] ftrace: allocated 216 pages with 4 groups [ 0.168464] Dynamic Preempt: voluntary [ 0.168488] rcu: Preemptible hierarchical RCU implementation. [ 0.168488] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12. [ 0.168489] Trampoline variant of Tasks RCU enabled. [ 0.168489] Rude variant of Tasks RCU enabled. [ 0.168490] Tracing variant of Tasks RCU enabled. [ 0.168490] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.168491] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.169983] NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16 [ 0.170264] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.170444] Console: colour dummy device 80x25 [ 0.170445] printk: console [tty0] enabled [ 0.170473] ACPI: Core revision 20230331 [ 0.170715] hpet: HPET dysfunctional in PC10. Force disabled. [ 0.170716] APIC: Switch to symmetric I/O mode setup [ 0.170718] DMAR: Host address width 39 [ 0.170718] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.170722] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e [ 0.170723] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.170726] DMAR: dmar1: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da [ 0.170728] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff [ 0.170730] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.170731] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.170731] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.172257] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.172258] x2apic enabled [ 0.172278] Switched APIC routing to cluster x2apic. [ 0.176668] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns [ 0.176674] Calibrating delay loop (skipped), value calculated using timer frequency.. 4992.00 BogoMIPS (lpj=9984000) [ 0.176721] CPU0: Thermal monitoring enabled (TM1) [ 0.176723] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.176822] process: using mwait in idle threads [ 0.176825] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.176825] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.176828] Spectre V2 : User space: Vulnerable [ 0.176829] Speculative Store Bypass: Vulnerable [ 0.176837] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.176838] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.176838] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.176838] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.176839] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.176840] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 [ 0.176841] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. [ 0.180671] Freeing SMP alternatives memory: 44K [ 0.180671] pid_max: default: 32768 minimum: 301 [ 0.180671] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity [ 0.180671] landlock: Up and running. [ 0.180671] Yama: becoming mindful. [ 0.180671] AppArmor: AppArmor initialized [ 0.180671] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.180671] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.180671] smpboot: CPU0: 12th Gen Intel(R) Core(TM) i5-12450H (family: 0x6, model: 0x9a, stepping: 0x3) [ 0.180671] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.180671] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.180671] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1. [ 0.180671] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.180671] core: cpu_core PMU driver: [ 0.180671] ... version: 5 [ 0.180671] ... bit width: 48 [ 0.180671] ... generic registers: 8 [ 0.180671] ... value mask: 0000ffffffffffff [ 0.180671] ... max period: 00007fffffffffff [ 0.180671] ... fixed-purpose events: 4 [ 0.180671] ... event mask: 0001000f000000ff [ 0.180671] signal: max sigframe size: 3632 [ 0.180671] Estimated ratio of average max frequency by base frequency (times 1024): 1679 [ 0.180671] rcu: Hierarchical SRCU implementation. [ 0.180671] rcu: Max phase no-delay instances is 1000. [ 0.180671] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.180671] smp: Bringing up secondary CPUs ... [ 0.180671] smpboot: x86: Booting SMP configuration: [ 0.180671] .... node #0, CPUs: #2 #4 #6 #8 #9 #10 #11 [ 0.010253] core: cpu_atom PMU driver: PEBS-via-PT [ 0.010253] ... version: 5 [ 0.010253] ... bit width: 48 [ 0.010253] ... generic registers: 6 [ 0.010253] ... value mask: 0000ffffffffffff [ 0.010253] ... max period: 00007fffffffffff [ 0.010253] ... fixed-purpose events: 3 [ 0.010253] ... event mask: 000000070000003f [ 0.186410] #1 #3 #5 #7 [ 0.189544] smp: Brought up 1 node, 12 CPUs [ 0.189544] smpboot: Max logical packages: 1 [ 0.189544] smpboot: Total of 12 processors activated (59904.00 BogoMIPS) [ 0.193915] devtmpfs: initialized [ 0.193915] x86/mm: Memory block size: 2048MB [ 0.193915] ACPI: PM: Registering ACPI NVS region [mem 0x3fbaa000-0x3fcc2fff] (1150976 bytes) [ 0.193915] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.193915] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.193915] pinctrl core: initialized pinctrl subsystem [ 0.193915] PM: RTC time: 20:31:44, date: 2023-11-18 [ 0.193915] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.193915] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.193915] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.194173] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.194193] thermal_sys: Registered thermal governor 'fair_share' [ 0.194193] thermal_sys: Registered thermal governor 'bang_bang' [ 0.194193] thermal_sys: Registered thermal governor 'step_wise' [ 0.194193] thermal_sys: Registered thermal governor 'user_space' [ 0.194193] thermal_sys: Registered thermal governor 'power_allocator' [ 0.194193] EISA bus registered [ 0.194193] cpuidle: using governor ladder [ 0.194193] cpuidle: using governor menu [ 0.194193] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.194193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.194193] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.194193] PCI: not using MMCONFIG [ 0.194193] PCI: Using configuration type 1 for base access [ 0.194193] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.196709] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.200745] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.200745] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.200745] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.200745] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.201009] ACPI: Added _OSI(Module Device) [ 0.201011] ACPI: Added _OSI(Processor Device) [ 0.201011] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.201012] ACPI: Added _OSI(Processor Aggregator Device) [ 0.264708] ACPI: 15 ACPI AML tables successfully acquired and loaded [ 0.273540] ACPI: Dynamic OEM Table Load: [ 0.273547] ACPI: SSDT 0xFFFF9432802E2C00 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20200717) [ 0.274215] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.277414] ACPI: Dynamic OEM Table Load: [ 0.277419] ACPI: SSDT 0xFFFF94328178E000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20200717) [ 0.278220] ACPI: Dynamic OEM Table Load: [ 0.278224] ACPI: SSDT 0xFFFF94328227B800 0005E4 (v02 PmRef Cpu0Ist 00003000 INTL 20200717) [ 0.279089] ACPI: Dynamic OEM Table Load: [ 0.279093] ACPI: SSDT 0xFFFF94328227B000 0004B5 (v02 PmRef Cpu0Hwp 00003000 INTL 20200717) [ 0.280137] ACPI: Dynamic OEM Table Load: [ 0.280143] ACPI: SSDT 0xFFFF943281782000 001BAF (v02 PmRef ApIst 00003000 INTL 20200717) [ 0.281477] ACPI: Dynamic OEM Table Load: [ 0.281482] ACPI: SSDT 0xFFFF943281780000 001038 (v02 PmRef ApHwp 00003000 INTL 20200717) [ 0.282625] ACPI: Dynamic OEM Table Load: [ 0.282630] ACPI: SSDT 0xFFFF943282284000 001349 (v02 PmRef ApPsd 00003000 INTL 20200717) [ 0.283784] ACPI: Dynamic OEM Table Load: [ 0.283788] ACPI: SSDT 0xFFFF94328015D000 000FBB (v02 PmRef ApCst 00003000 INTL 20200717) [ 0.288363] ACPI: EC: EC started [ 0.288364] ACPI: EC: interrupt blocked [ 0.291926] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.291927] ACPI: \_SB_.PC00.LPCB.EC__: Boot DSDT EC used to handle transactions [ 0.291928] ACPI: Interpreter enabled [ 0.291970] ACPI: PM: (supports S0 S3 S4 S5) [ 0.291971] ACPI: Using IOAPIC for interrupt routing [ 0.292005] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.293372] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource [ 0.293378] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.293379] PCI: Ignoring E820 reservations for host bridge windows [ 0.294216] ACPI: Enabled 9 GPEs in block 00 to 7F [ 0.307074] ACPI: \_SB_.PC00.XHCI.RHUB.HS10.BTRT: New power resource [ 0.307596] ACPI: \_SB_.PC00.PAUD: New power resource [ 0.308319] ACPI: \_SB_.PC00.I2C0.PXTC: New power resource [ 0.312841] ACPI: \_SB_.PC00.CNVW.WRST: New power resource [ 0.317070] ACPI: \PIN_: New power resource [ 0.317289] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) [ 0.317293] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.320124] PCI host bridge to bus 0000:00 [ 0.320125] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xbfffffff window] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:00: root bus resource [mem 0xfe0b0400-0xfe0b13ff window] pci_bus 0000:00: root bus resource [bus 00-fe] pci 0000:00:00.0: [8086:4629] type 00 class 0x060000 [ 0.320268] pci 0000:00:01.0: [8086:460d] type 01 class 0x060400 [ 0.320321] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.320341] pci 0000:00:01.0: PTM enabled (root), 4ns granularity [ 0.320810] pci 0000:00:02.0: [8086:46a3] type 00 class 0x030000 [ 0.320817] pci 0000:00:02.0: reg 0x10: [mem 0x6202000000-0x6202ffffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.320837] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.320839] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs) [ 0.320864] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs) [ 0.320965] pci 0000:00:04.0: [8086:461d] type 00 class 0x118000 [ 0.320976] pci 0000:00:04.0: reg 0x10: [mem 0x6203100000-0x620311ffff 64bit] pci 0000:00:06.0: [8086:464d] type 01 class 0x060400 [ 0.321264] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.321287] pci 0000:00:06.0: PTM enabled (root), 4ns granularity [ 0.321733] pci 0000:00:06.2: [8086:463d] type 01 class 0x060400 [ 0.321782] pci 0000:00:06.2: PME# supported from D0 D3hot D3cold [ 0.321800] pci 0000:00:06.2: PTM enabled (root), 4ns granularity [ 0.322244] pci 0000:00:08.0: [8086:464f] type 00 class 0x088000 [ 0.322251] pci 0000:00:08.0: reg 0x10: [mem 0x6203140000-0x6203140fff 64bit] pci 0000:00:14.0: [8086:51ed] type 00 class 0x0c0330 [ 0.322384] pci 0000:00:14.0: reg 0x10: [mem 0x6203120000-0x620312ffff 64bit] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.324040] pci 0000:00:14.2: [8086:51ef] type 00 class 0x050000 [ 0.324059] pci 0000:00:14.2: reg 0x10: [mem 0x6203138000-0x620313bfff 64bit] pci 0000:00:14.2: reg 0x18: [mem 0x620313f000-0x620313ffff 64bit] pci 0000:00:14.3: [8086:51f0] type 00 class 0x028000 [ 0.324291] pci 0000:00:14.3: reg 0x10: [mem 0x6203134000-0x6203137fff 64bit] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold [ 0.324731] pci 0000:00:15.0: [8086:51e8] type 00 class 0x0c8000 [ 0.324759] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] pci 0000:00:16.0: [8086:51e0] type 00 class 0x078000 [ 0.325118] pci 0000:00:16.0: reg 0x10: [mem 0x620313d000-0x620313dfff 64bit] pci 0000:00:16.0: PME# supported from D3hot [ 0.325622] pci 0000:00:1c.0: [8086:51b8] type 01 class 0x060400 [ 0.325716] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.326175] pci 0000:00:1c.5: [8086:51bd] type 01 class 0x060400 [ 0.326271] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.326302] pci 0000:00:1c.5: PTM enabled (root), 4ns granularity [ 0.326758] pci 0000:00:1f.0: [8086:5182] type 00 class 0x060100 [ 0.327043] pci 0000:00:1f.3: [8086:51c8] type 00 class 0x040100 [ 0.327085] pci 0000:00:1f.3: reg 0x10: [mem 0x6203130000-0x6203133fff 64bit] pci 0000:00:1f.3: reg 0x20: [mem 0x6203000000-0x62030fffff 64bit] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.327321] pci 0000:00:1f.4: [8086:51a3] type 00 class 0x0c0500 [ 0.327345] pci 0000:00:1f.4: reg 0x10: [mem 0x620313c000-0x620313c0ff 64bit] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] pci 0000:00:1f.5: [8086:51a4] type 00 class 0x0c8000 [ 0.327576] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] pci 0000:01:00.0: [10de:28a0] type 00 class 0x030000 [ 0.327718] pci 0000:01:00.0: reg 0x10: [mem 0x50000000-0x50ffffff] pci 0000:01:00.0: reg 0x14: [mem 0x6000000000-0x61ffffffff 64bit pref] pci 0000:01:00.0: reg 0x1c: [mem 0x6200000000-0x6201ffffff 64bit pref] pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f] pci 0000:01:00.0: reg 0x30: [mem 0x51000000-0x5107ffff pref] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.327904] pci 0000:01:00.1: [10de:22be] type 00 class 0x040300 [ 0.327912] pci 0000:01:00.1: reg 0x10: [mem 0x51080000-0x51083fff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0x50000000-0x510fffff] pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6201ffffff 64bit pref] pci 0000:00:06.0: PCI bridge to [bus 02] pci 0000:03:00.0: [2646:5013] type 00 class 0x010802 [ 0.328102] pci 0000:03:00.0: reg 0x10: [mem 0x51300000-0x51303fff 64bit] pci 0000:00:06.2: PCI bridge to [bus 03] pci 0000:00:06.2: bridge window [mem 0x51300000-0x513fffff] pci 0000:00:1c.0: PCI bridge to [bus 04] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000 [ 0.328441] pci 0000:05:00.0: reg 0x10: [io 0x3000-0x30ff] pci 0000:05:00.0: reg 0x18: [mem 0x51204000-0x51204fff 64bit] pci 0000:05:00.0: reg 0x20: [mem 0x51200000-0x51203fff 64bit] pci 0000:05:00.0: supports D1 D2 [ 0.328616] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.328844] pci 0000:00:1c.5: PCI bridge to [bus 05] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.5: bridge window [mem 0x51200000-0x512fffff] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.331039] ACPI: PCI: Interrupt link LNKB configured for IRQ 1 [ 0.331116] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.331192] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.331269] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.331345] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.331422] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.331498] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.648859] Low-power S0 idle used by default for system suspend [ 0.649032] ACPI: EC: interrupt unblocked [ 0.649033] ACPI: EC: event unblocked [ 0.649054] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.649055] ACPI: EC: GPE=0x6e [ 0.649055] ACPI: \_SB_.PC00.LPCB.EC__: Boot DSDT EC initialization complete [ 0.649057] ACPI: \_SB_.PC00.LPCB.EC__: EC: Used to handle transactions and events [ 0.649108] iommu: Default domain type: Passthrough (set via kernel command line) [ 0.649108] SCSI subsystem initialized [ 0.649108] libata version 3.00 loaded. [ 0.649108] ACPI: bus type USB registered [ 0.649108] usbcore: registered new interface driver usbfs [ 0.649108] usbcore: registered new interface driver hub [ 0.649108] usbcore: registered new device driver usb [ 0.649108] pps_core: LinuxPPS API ver. 1 registered [ 0.649108] pps_core: Software ver. 5.3.6 - Copyright 0FB6-08D5 Rodolfo Giometti <XXX@XXX> [ 0.649108] PTP clock support registered [ 0.649108] EDAC MC: Ver: 3.0.0 [ 0.649108] efivars: Registered efivars operations [ 0.649108] NetLabel: Initializing [ 0.649108] NetLabel: domain hash size = 128 [ 0.649108] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.649108] NetLabel: unlabeled traffic allowed by default [ 0.649108] mctp: management component transport protocol core [ 0.649108] NET: Registered PF_MCTP protocol family [ 0.649108] PCI: Using ACPI for IRQ routing [ 0.672277] PCI: pci_cache_line_size set to 64 bytes [ 0.672428] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window [ 0.672536] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] e820: reserve RAM buffer [mem 0x33b9c018-0x33ffffff] e820: reserve RAM buffer [mem 0x344e3000-0x37ffffff] e820: reserve RAM buffer [mem 0x3471c000-0x37ffffff] e820: reserve RAM buffer [mem 0x3952e000-0x3bffffff] e820: reserve RAM buffer [mem 0x3c9a1000-0x3fffffff] e820: reserve RAM buffer [mem 0x42f00000-0x43ffffff] e820: reserve RAM buffer [mem 0x10b0800000-0x10b3ffffff] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.672566] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.672566] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.672566] pci 0000:01:00.0: vgaarb: bridge control possible [ 0.672566] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.672566] vgaarb: loaded [ 0.673259] clocksource: Switched to clocksource tsc-early [ 0.673338] VFS: Disk quotas dquot_6.6.0 [ 0.673344] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.673402] AppArmor: AppArmor Filesystem Enabled [ 0.673422] pnp: PnP ACPI init [ 0.673662] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.673664] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.673750] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.675271] pnp 00:03: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved [ 0.675286] system 00:03: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.675287] system 00:03: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.675288] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved [ 0.675289] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.675290] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.675290] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.675613] system 00:04: [io 0x2000-0x20fe] has been reserved [ 0.676241] pnp: PnP ACPI: found 6 devices [ 0.680757] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.680797] NET: Registered PF_INET protocol family [ 0.680954] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.682548] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.682584] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.682849] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.683219] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.683314] TCP: Hash tables configured (established 524288 bind 65536) [ 0.683484] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, linear) [ 0.683612] UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.683717] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.683779] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.683783] NET: Registered PF_XDP protocol family [ 0.683788] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 [ 0.683795] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit] pci 0000:00:1f.5: BAR 0: assigned [mem 0x4f800000-0x4f800fff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0x50000000-0x510fffff] pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6201ffffff 64bit pref] pci 0000:00:06.0: PCI bridge to [bus 02] pci 0000:00:06.2: PCI bridge to [bus 03] pci 0000:00:06.2: bridge window [mem 0x51300000-0x513fffff] pci 0000:00:1c.0: PCI bridge to [bus 04] pci 0000:00:1c.5: PCI bridge to [bus 05] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.5: bridge window [mem 0x51200000-0x512fffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window] pci_bus 0000:00: resource 8 [mem 0x4f800000-0xbfffffff window] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window] pci_bus 0000:00: resource 10 [mem 0xfe0b0400-0xfe0b13ff window] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0x50000000-0x510fffff] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x6201ffffff 64bit pref] pci_bus 0000:03: resource 1 [mem 0x51300000-0x513fffff] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] pci_bus 0000:05: resource 1 [mem 0x51200000-0x512fffff] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec [ 0.684414] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 0.684423] PCI: CLS 64 bytes, default 64 [ 0.684459] DMAR: No ATSR found [ 0.684460] DMAR: No SATC found [ 0.684461] DMAR: IOMMU feature fl1gp_support inconsistent [ 0.684461] DMAR: IOMMU feature pgsel_inv inconsistent [ 0.684462] DMAR: IOMMU feature nwfs inconsistent [ 0.684462] DMAR: IOMMU feature dit inconsistent [ 0.684463] DMAR: IOMMU feature sc_support inconsistent [ 0.684463] DMAR: IOMMU feature dev_iotlb_support inconsistent [ 0.684464] DMAR: dmar0: Using Queued invalidation [ 0.684466] DMAR: dmar1: Using Queued invalidation [ 0.684510] Trying to unpack rootfs image as initramfs... [ 0.684760] pci 0000:00:02.0: Adding to iommu group 0 [ 0.684783] pci 0000:00:00.0: Adding to iommu group 1 [ 0.684789] pci 0000:00:01.0: Adding to iommu group 2 [ 0.684794] pci 0000:00:04.0: Adding to iommu group 3 [ 0.684809] pci 0000:00:06.0: Adding to iommu group 4 [ 0.684814] pci 0000:00:06.2: Adding to iommu group 5 [ 0.684819] pci 0000:00:08.0: Adding to iommu group 6 [ 0.684828] pci 0000:00:14.0: Adding to iommu group 7 [ 0.684833] pci 0000:00:14.2: Adding to iommu group 7 [ 0.684838] pci 0000:00:14.3: Adding to iommu group 8 [ 0.684845] pci 0000:00:15.0: Adding to iommu group 9 [ 0.684852] pci 0000:00:16.0: Adding to iommu group 10 [ 0.684863] pci 0000:00:1c.0: Adding to iommu group 11 [ 0.684869] pci 0000:00:1c.5: Adding to iommu group 12 [ 0.684882] pci 0000:00:1f.0: Adding to iommu group 13 [ 0.684887] pci 0000:00:1f.3: Adding to iommu group 13 [ 0.684893] pci 0000:00:1f.4: Adding to iommu group 13 [ 0.684898] pci 0000:00:1f.5: Adding to iommu group 13 [ 0.684910] pci 0000:01:00.0: Adding to iommu group 14 [ 0.684916] pci 0000:01:00.1: Adding to iommu group 14 [ 0.684921] pci 0000:03:00.0: Adding to iommu group 15 [ 0.684929] pci 0000:05:00.0: Adding to iommu group 16 [ 0.685016] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.685017] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.685017] software IO TLB: mapped [mem 0x000000002f9a8000-0x00000000339a8000] (64MB) [ 0.685287] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns [ 0.685301] clocksource: Switched to clocksource tsc [ 0.685315] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.685662] Initialise system trusted keyrings [ 0.685669] Key type blacklist registered [ 0.685721] workingset: timestamp_bits=36 max_order=24 bucket_order=0 [ 0.685732] zbud: loaded [ 0.685845] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.685884] fuse: init (API version 7.38) [ 0.685990] integrity: Platform Keyring initialized [ 0.685991] integrity: Machine keyring initialized [ 0.689598] Key type asymmetric registered [ 0.689599] Asymmetric key parser 'x509' registered [ 0.689609] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.689667] io scheduler mq-deadline registered [ 0.690019] pcieport 0000:00:01.0: PME: Signaling with IRQ 122 [ 0.690143] pcieport 0000:00:01.0: AER: enabled with IRQ 122 [ 0.690332] pcieport 0000:00:06.0: PME: Signaling with IRQ 123 [ 0.690374] pcieport 0000:00:06.0: AER: enabled with IRQ 123 [ 0.690524] pcieport 0000:00:06.2: PME: Signaling with IRQ 124 [ 0.690547] pcieport 0000:00:06.2: AER: enabled with IRQ 124 [ 0.690641] pcieport 0000:00:1c.0: PME: Signaling with IRQ 125 [ 0.690803] pcieport 0000:00:1c.5: PME: Signaling with IRQ 126 [ 0.690832] pcieport 0000:00:1c.5: AER: enabled with IRQ 126 [ 0.690897] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.690934] efifb: probing for efifb [ 0.690945] efifb: showing boot graphics [ 0.692036] efifb: framebuffer at 0x4000000000, using 8100k, total 8100k [ 0.692037] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.692038] efifb: scrolling: redraw [ 0.692038] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.692066] fbcon: Deferring console take-over [ 0.692067] fb0: EFI VGA frame buffer device [ 0.692622] ACPI: AC: AC Adapter [ADP1] (on-line) [ 0.692661] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:36/PNP0C09:00/PNP0C0D:00/input/input0 [ 0.692685] ACPI: button: Lid Switch [LID0] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.692717] ACPI: button: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.692750] ACPI: button: Power Button [PWRB] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.695186] ACPI: thermal: Thermal Zone [THRM] (78 C) [ 0.695432] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.696619] hpet_acpi_add: no address or irqs in _CRS [ 0.696635] Linux agpgart interface v0.103 [ 0.697959] loop: module loaded [ 0.698079] tun: Universal TUN/TAP device driver, 1.6 [ 0.698091] PPP generic driver version 2.4.2 [ 0.698222] VFIO - User Level meta-driver version: 0.3 [ 0.698283] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.698285] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.699902] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.699979] mousedev: PS/2 mouse device common for all mice [ 0.700120] rtc_cmos rtc_cmos: RTC can wake from S4 [ 0.700982] rtc_cmos rtc_cmos: registered as rtc0 [ 0.701161] rtc_cmos rtc_cmos: setting system clock to 2023-11-18T20:31:44 UTC (1700339504) [ 0.701185] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 0.701191] i2c_dev: i2c /dev entries driver [ 0.701794] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 0.701802] device-mapper: uevent: version 1.0.3 [ 0.701842] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: XXX@XXX [ 0.701853] platform eisa.0: Probing EISA bus 0 [ 0.701854] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.701855] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.701855] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.701856] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.701856] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.701857] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.701857] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.701858] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.701858] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.701859] platform eisa.0: EISA: Detected 0 cards [ 0.701861] intel_pstate: Intel P-state driver initializing [ 0.703205] intel_pstate: HWP enabled [ 0.703443] ledtrig-cpu: registered to indicate activity on CPUs [ 0.703529] intel_pmc_core INT33A1:00: initialized [ 0.703584] drop_monitor: Initializing network drop monitor service [ 0.710992] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.711654] NET: Registered PF_INET6 protocol family [ 0.802383] ACPI: battery: Slot [BAT1] (battery present) [ 1.015128] Freeing initrd memory: 118004K [ 1.019715] Segment Routing with IPv6 [ 1.019725] In-situ OAM (IOAM) with IPv6 [ 1.019744] NET: Registered PF_PACKET protocol family [ 1.020068] Key type dns_resolver registered [ 1.021627] microcode: Microcode Update Driver: v2.2. [ 1.021631] IPI shorthand broadcast: enabled [ 1.022379] sched_clock: Marking stable (1016001438, 6253024)->(1042768269, -20513807) [ 1.022757] registered taskstats version 1 [ 1.023285] Loading compiled-in X.509 certificates [ 1.023764] Loaded X.509 cert 'Build time autogenerated kernel key: 0228b76f5c862e8f6947a249298592e4e2cacdf8' [ 1.024003] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969' [ 1.024239] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19' [ 1.024239] blacklist: Loading compiled-in revocation X.509 certificates [ 1.024247] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0' [ 1.024254] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03' [ 1.024261] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b' [ 1.024270] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8' [ 1.024277] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d' [ 1.024284] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c' [ 1.024290] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af' [ 1.024296] Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9' [ 1.025314] Key type .fscrypt registered [ 1.025317] Key type fscrypt-provisioning registered [ 1.027798] Key type encrypted registered [ 1.027802] AppArmor: AppArmor sha1 policy hashing enabled [ 1.028109] integrity: Loading X.509 certificate: UEFI:db [ 1.028138] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.028139] integrity: Loading X.509 certificate: UEFI:db [ 1.028153] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.029126] ima: No TPM chip found, activating TPM-bypass! [ 1.029130] Loading compiled-in module X.509 certificates [ 1.029613] Loaded X.509 cert 'Build time autogenerated kernel key: 0228b76f5c862e8f6947a249298592e4e2cacdf8' [ 1.029615] ima: Allocated hash algorithm: sha1 [ 1.029621] ima: No architecture policies found [ 1.029628] evm: Initialising EVM extended attributes: [ 1.029629] evm: security.selinux [ 1.029630] evm: security.SMACK64 [ 1.029630] evm: security.SMACK64EXEC [ 1.029631] evm: security.SMACK64TRANSMUTE [ 1.029632] evm: security.SMACK64MMAP [ 1.029632] evm: security.apparmor [ 1.029633] evm: security.ima [ 1.029633] evm: security.capability [ 1.029634] evm: HMAC attrs: 0x1 [ 1.029882] PM: Magic number: 15:982:548 [ 1.029894] tty ttyS24: hash matches [ 1.029896] port serial8250:0.23: hash matches [ 1.030083] RAS: Correctable Errors collector initialized. [ 1.030120] clk: Disabling unused clocks [ 1.031220] Freeing unused decrypted memory: 2036K [ 1.031904] Freeing unused kernel image (initmem) memory: 4780K [ 1.066551] Write protecting the kernel read-only data: 34816k [ 1.068075] Freeing unused kernel image (rodata/data gap) memory: 1220K [ 1.083235] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.083347] Run /init as init process [ 1.083358] with arguments: [ 1.083359] /init [ 1.083359] splash [ 1.083360] with environment: [ 1.083360] HOME=/ [ 1.083361] TERM=linux [ 1.137097] wmi_bus wmi_bus-PNP0C14:00: WQAK data block query control method not found [ 1.137102] wmi_bus wmi_bus-PNP0C14:00: WQAL data block query control method not found [ 1.140554] hid: raw HID events driver (C) Jiri Kosina [ 1.143347] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.143354] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.144434] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810 [ 1.144463] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 1.144505] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 1.144711] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.144714] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.144716] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.144746] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 1.144748] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.144749] usb usb1: Product: xHCI Host Controller [ 1.144750] usb usb1: Manufacturer: Linux 6.5.6-76060506-generic xhci-hcd [ 1.144752] usb usb1: SerialNumber: ... [ 1.144863] hub 1-0:1.0: USB hub found [ 1.144883] hub 1-0:1.0: 12 ports detected [ 1.145124] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.147841] cryptd: max_cpu_qlen set to 1000 [ 1.148265] i2c i2c-0: 2/2 memory slots populated (from DMI) [ 1.148269] i2c i2c-0: Memory type 0x22 not supported yet, not instantiating SPD [ 1.148472] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 [ 1.148475] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=... [ 1.148476] usb usb2: Product: xHCI Host Controller [ 1.148476] usb usb2: Manufacturer: Linux 6.5.6-76060506-generic xhci-hcd [ 1.148477] usb usb2: SerialNumber: ... [ 1.148562] hub 2-0:1.0: USB hub found [ 1.148573] hub 2-0:1.0: 4 ports detected [ 1.154278] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006) [ 1.154729] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 1.158220] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 1.158247] AVX2 version of gcm_enc/dec engaged. [ 1.158318] AES CTR mode by8 optimization enabled [ 1.158380] ACPI: bus type drm_connector registered [ 1.158394] nvme nvme0: pci function 0000:03:00.0 [ 1.159668] r8169 0000:05:00.0 eth0: RTL8168h/8111h, 93C77F1B69E5281297AC5C381C0CBDBD, XID 541, IRQ 128 [ 1.159670] r8169 0000:05:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] nvme nvme0: Shutdown timeout set to 10 seconds [ 1.164316] nvme nvme0: 12/0/0 default/read/poll queues [ 1.166097] nvme0n1: p1 p2 p3 p4 p5 p6 p7 [ 1.252334] r8169 0000:05:00.0 enp5s0: renamed from eth0 [ 1.254619] input: ELAN0307:00 04F3:3282 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0307:00/0018:04F3:3282.0001/input/input4 [ 1.254672] input: ELAN0307:00 04F3:3282 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0307:00/0018:04F3:3282.0001/input/input6 [ 1.254720] hid-generic 0018:04F3:3282.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0307:00 04F3:3282] on i2c-ELAN0307:00 [ 1.414259] usb 1-5: new high-speed USB device number 2 using xhci_hcd [ 1.480582] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 1.480676] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.480713] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 1.481242] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 1.483002] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc_ver2_16.bin (v2.16) [ 1.500163] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.5.1 [ 1.500168] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 [ 1.515119] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads [ 1.515834] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled [ 1.515835] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled [ 1.516221] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled [ 1.516923] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized [ 1.565976] usb 1-5: New USB device found, idVendor=2109, idProduct=2822, bcdDevice= 6.83 [ 1.566001] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.566009] usb 1-5: Product: USB2.0 Hub [ 1.566015] usb 1-5: Manufacturer: VIA Labs, Inc. [ 1.566020] usb 1-5: SerialNumber: ... [ 1.568789] hub 1-5:1.0: USB hub found [ 1.569156] hub 1-5:1.0: 5 ports detected [ 1.690629] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.713213] usb 2-1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 1.713234] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.713241] usb 2-1: Product: SanDisk 3.2Gen1 [ 1.713247] usb 2-1: Manufacturer: USB [ 1.713253] usb 2-1: SerialNumber: ... [ 1.726364] usb-storage 2-1:1.0: USB Mass Storage device detected [ 1.727165] scsi host0: usb-storage 2-1:1.0 [ 1.727412] usbcore: registered new interface driver usb-storage [ 1.729650] usbcore: registered new interface driver uas [ 1.838322] usb 1-6: new high-speed USB device number 3 using xhci_hcd [ 1.997777] usb 1-6: New USB device found, idVendor=5986, idProduct=211b, bcdDevice= 3.01 [ 1.997798] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 1.997806] usb 1-6: Product: HD Webcam [ 1.997812] usb 1-6: Manufacturer: SunplusIT Inc [ 2.114905] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 3 using xhci_hcd [ 2.165900] usb 2-3: New USB device found, idVendor=2109, idProduct=0822, bcdDevice= 6.83 [ 2.165923] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.165931] usb 2-3: Product: USB3.1 Hub [ 2.165937] usb 2-3: Manufacturer: VIA Labs, Inc. [ 2.165943] usb 2-3: SerialNumber: ... [ 2.170912] hub 2-3:1.0: USB hub found [ 2.171612] hub 2-3:1.0: 4 ports detected [ 2.290360] usb 1-10: new full-speed USB device number 4 using xhci_hcd [ 2.441625] usb 1-10: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02 [ 2.441647] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=... [ 2.518347] usb 1-5.5: new high-speed USB device number 5 using xhci_hcd [ 2.617748] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 2.620262] usb 1-5.5: New USB device found, idVendor=2109, idProduct=8818, bcdDevice= 0.01 [ 2.620280] usb 1-5.5: New USB device strings: Mfr=1, Product=2, SerialNumber=... [ 2.620285] usb 1-5.5: Product: USB Billboard Device [ 2.620289] usb 1-5.5: Manufacturer: VIA Labs, Inc. [ 2.620292] usb 1-5.5: SerialNumber: ... [ 2.622602] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.623725] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 2.627937] fbcon: i915drmfb (fb0) is primary device [ 2.627950] fbcon: Deferring console take-over [ 2.627964] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 2.729080] system76_acpi: loading out-of-tree module taints kernel. [ 2.729083] system76_acpi: module verification failed: signature and/or required key missing - tainting kernel [ 2.731100] system76: Model does not utilize this driver [ 2.739073] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 2.739271] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.739572] sd 0:0:0:0: [sda] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) [ 2.740398] sd 0:0:0:0: [sda] Write Protect is off [ 2.740407] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 2.740731] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.751689] sda: sda1 sda2 [ 2.751810] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 2.787723] usbcore: registered new interface driver system76-io [ 2.882254] raid6: avx2x4 gen() 40750 MB/s [ 2.950254] raid6: avx2x2 gen() 44003 MB/s [ 3.018254] raid6: avx2x1 gen() 41533 MB/s [ 3.018255] raid6: using algorithm avx2x2 gen() 44003 MB/s [ 3.086254] raid6: .... xor() 29096 MB/s, rmw enabled [ 3.086255] raid6: using avx2x2 recovery algorithm [ 3.087331] xor: automatically using best checksumming function avx [ 3.088036] async_tx: api initialized (async) [ 3.970438] EXT4-fs (nvme0n1p3): mounted filesystem HASH_29D-5C2F-B1D0-4384-601E1CEA7A69 ro with ordered data mode. Quota mode: none. [ 4.142211] block nvme0n1: the capability attribute has been deprecated. [ 4.255820] EXT4-fs (nvme0n1p3): re-mounted HASH_29D-5C2F-B1D0-4384-601E1CEA7A69 r/w. Quota mode: none. [ 4.269339] pstore: Using crash dump compression: deflate [ 4.272213] RPC: Registered named UNIX socket transport module. [ 4.272216] RPC: Registered udp transport module. [ 4.272217] RPC: Registered tcp transport module. [ 4.272218] RPC: Registered tcp-with-tls transport module. [ 4.272218] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.272475] lp: driver loaded but no devices found [ 4.274063] ppdev: user-space parallel port driver [ 4.276702] pstore: Registered efi_pstore as persistent store backend [ 4.319390] hdlc: HDLC support module revision 1.22 [ 4.323547] dahdi: Version: 3.1.0+git20230717~dfsg [ 4.324198] dahdi: Telephony Interface Registered on major 196 [ 4.325868] dahdi_transcode: Loaded. [ 4.349136] io scheduler kyber registered [ 4.419658] soc_button_array ACPI0011:00: Unknown button index 0 upage 01 usage c6, ignoring [ 4.431393] Consider using thermal netlink events interface [ 4.432740] input: Intel HID events as /devices/platform/INTC1070:00/input/input8 [ 4.433252] intel-hid INTC1070:00: platform supports 5 button array [ 4.439452] input: Intel HID 5 button array as /devices/platform/INTC1070:00/input/input9 [ 4.527913] input: MSI WMI hotkeys as /devices/virtual/input/input10 [ 4.536142] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 4.536145] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 4.536146] RAPL PMU: hw unit of domain package 2^-14 Joules [ 4.536147] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 4.536148] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 4.538947] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 4.559325] spi-nor spi0.0: mx25l25635e (32768 Kbytes) [ 4.569244] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.569443] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.599710] proc_thermal_pci 0000:00:04.0: enabling device (0000 -> 0002) [ 4.601714] Creating 1 MTD partitions on "0000:00:1f.5": [ 4.601720] 0x000000000000-0x000002000000 : "BIOS" [ 4.613125] intel_rapl_common: Found RAPL domain package [ 4.614200] Intel(R) Wireless WiFi driver for Linux [ 4.614353] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002) [ 4.618174] iwlwifi 0000:00:14.3: Detected crf-id 0x1300504, cnv-id 0x80400 wfpm id 0x80000030 [ 4.618219] iwlwifi 0000:00:14.3: PCI dev 51f0/0074, rev=0x370, rfid=0x10a100 [ 4.618408] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-83.ucode failed with error -2 [ 4.618490] iwlwifi 0000:00:14.3: Direct firmware load for iwlwifi-so-a0-hr-b0-82.ucode failed with error -2 [ 4.628117] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver [ 4.628134] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: XXX.XXX.XXX.XXX [ 4.628503] iwlwifi 0000:00:14.3: loaded firmware version 81.31fc9ae6.0 so-a0-hr-b0-81.ucode op_mode iwlmvm [ 4.633359] intel_tcc_cooling: TCC Offset locked [ 4.644179] io scheduler bfq registered [ 4.650318] snd_hda_intel: unknown parameter 'laptop-dmic' ignored [ 4.650565] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002) [ 4.650706] snd_hda_intel 0000:01:00.1: Disabling MSI [ 4.650713] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 4.662606] nvidia: module license 'NVIDIA' taints kernel. [ 4.662610] Disabling lock debugging due to kernel taint [ 4.662613] nvidia: module license taints kernel. [ 4.687081] EXT4-fs (nvme0n1p2): recovery complete [ 4.687089] EXT4-fs (nvme0n1p2): mounted filesystem HASH_4E1-0DDC-B2A0-D907-5FE5F5BC1155 r/w with ordered data mode. Quota mode: none. [ 4.689080] intel_rapl_msr: PL4 support detected. [ 4.689124] intel_rapl_common: Found RAPL domain package [ 4.689126] intel_rapl_common: Found RAPL domain core [ 4.689128] intel_rapl_common: Found RAPL domain uncore [ 4.689129] intel_rapl_common: Found RAPL domain psys [ 4.689256] input: gpio-keys as /devices/platform/ACPI0011:00/gpio-keys.1.auto/input/input11 [ 4.689419] mei_hdcp 0000:00:16.0-HASH_6A4-F9B6-59CA-B5B6-70CADF8C6425: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) [ 4.793534] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 4.794854] nvidia-nvlink: Nvlink Core is being initialized, major device number 507 [ 4.794860] [ 4.795019] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 4.795950] nvidia 0000:01:00.0: enabling device (0000 -> 0003) [ 4.796064] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none [ 4.836896] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 545.29.02 Thu Oct 26 21:21:38 UTC 2023 [ 4.850791] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 4.850819] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 4.850844] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 4.871077] input: ELAN0307:00 04F3:3282 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0307:00/0018:04F3:3282.0001/input/input16 [ 4.871282] input: ELAN0307:00 04F3:3282 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-ELAN0307:00/0018:04F3:3282.0001/input/input18 [ 4.871480] hid-multitouch 0018:04F3:3282.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0307:00 04F3:3282] on i2c-ELAN0307:00 [ 4.872729] mei_pxp 0000:00:16.0-HASH_CB2-4920-52D1-D0DC-7EB0C5A0EBDF: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915]) [ 4.875410] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 545.29.02 Thu Oct 26 20:52:21 UTC 2023 [ 4.881453] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 4.892449] Adding 4193784k swap on /dev/mapper/XXXXXXXXXX Priority:-2 extents:1 across:4193784k SSFS [ 4.893904] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x370 [ 4.893978] thermal thermal_zone8: failed to read out thermal zone (-61) [ 4.902579] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination [ 4.909840] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002) [ 4.909974] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100 [ 4.910038] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.916446] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode [ 4.970632] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5 [ 4.970637] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now [ 4.970641] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2 [ 4.973232] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 4.973235] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 4.973239] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30 [ 5.005502] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 5.005552] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 5.005560] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [ 5.005569] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x10 [ 5.005622] iwlwifi 0000:00:14.3: Detected RF HR B5, rfid=0x10a100 [ 5.007001] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [ 5.036590] zram: Added device: zram0 [ 5.072354] iwlwifi 0000:00:14.3: base HW address: F547BB8BA6D4868A6EC1E1F21DA722EF [ 5.122518] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0 [ 5.143396] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864 [ 5.143402] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:0 [ 5.172987] Dynamic Preempt: full [ 5.176042] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:0 [ 5.176311] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred [ 5.207055] snd_hda_codec_realtek ehdaudio0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.207059] snd_hda_codec_realtek ehdaudio0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.207061] snd_hda_codec_realtek ehdaudio0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 5.207062] snd_hda_codec_realtek ehdaudio0D0: mono: mono_out=0x0 [ 5.207063] snd_hda_codec_realtek ehdaudio0D0: inputs: [ 5.207064] snd_hda_codec_realtek ehdaudio0D0: Mic=0x19 [ 5.245046] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 5.251319] snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten [ 5.251325] snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten [ 5.251436] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten [ 5.251439] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten [ 5.251442] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten [ 5.251445] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten [ 5.251448] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten [ 5.251452] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten [ 5.251456] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten [ 5.251461] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten [ 5.251466] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten [ 5.251469] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten [ 5.251473] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten [ 5.251484] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3 [ 5.254288] Generic FE-GE Realtek PHY r8169-0-500:00: attached PHY driver (mii_bus:phy_addr=r8169-0-500:00, irq=MAC) [ 5.267426] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2/input19 [ 5.267480] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2/input20 [ 5.267522] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2/input21 [ 5.267568] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2/input22 [ 5.267614] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card2/input23 [ 5.454513] r8169 0000:05:00.0 enp5s0: Link is Down [ 5.458485] warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 5.467858] iwlwifi 0000:00:14.3: WRT: Invalid buffer destination [ 5.566409] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20 [ 5.566457] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f [ 5.566465] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90 [ 5.566473] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x10 [ 5.567675] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4 [ 5.577070] ACPI BIOS Error (bug): Could not resolve symbol [\_TZ.ETMD], AE_NOT_FOUND (20230331/psargs-330) [ 5.577075] [ 5.577076] No Local Variables are initialized for Method [_OSC] [ 5.577077] Initialized Arguments for Method [_OSC]: (4 arguments defined for method invocation) [ 5.577077] Arg0: 0000000084ae98d9 <Obj> Buffer(16) 5D A8 3B B2 B7 C8 42 35 [ 5.577082] Arg1: 00000000090a85d7 <Obj> Integer 0000000000000001 [ 5.577085] Arg2: 0000000017e2eb92 <Obj> Integer 0000000000000002 [ 5.577086] Arg3: 000000002aab4d64 <Obj> Buffer(8) 00 00 00 00 05 00 00 00 [ 5.577089] [ 5.577090] ACPI Error: Aborting method \_SB.IETM._OSC due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 5.592348] fbcon: Taking over console [ 5.604372] Console: switching to colour frame buffer device 240x67 [ 5.637938] mc: Linux media interface: v0.10 [ 5.638637] iwlwifi 0000:00:14.3: Registered PHC clock: iwlwifi-PTP, with index: 0 [ 5.652342] videodev: Linux video capture interface: v2.00 [ 5.663227] usb 1-6: Found UVC 1.00 device HD Webcam (5986:211b) [ 5.674719] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1 [ 5.678813] usbcore: registered new interface driver uvcvideo [ 5.685431] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint. [ 5.717429] nvidia-uvm: Loaded the UVM driver, major device number 504. [ 5.873800] Bluetooth: Core ver 2.22 [ 5.873823] NET: Registered PF_BLUETOOTH protocol family [ 5.873824] Bluetooth: HCI device and connection manager initialized [ 5.873828] Bluetooth: HCI socket layer initialized [ 5.873829] Bluetooth: L2CAP socket layer initialized [ 5.873832] Bluetooth: SCO socket layer initialized [ 5.881118] usbcore: registered new interface driver btusb [ 6.036145] Bluetooth: hci0: Device revision is 2 [ 6.036150] Bluetooth: hci0: Secure boot is enabled [ 6.036152] Bluetooth: hci0: OTP lock is enabled [ 6.036152] Bluetooth: hci0: API lock is enabled [ 6.036153] Bluetooth: hci0: Debug lock is disabled [ 6.036154] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [ 6.036155] Bluetooth: hci0: Bootloader timestamp 2019.40 buildtype 1 build 38 [ 6.040617] Bluetooth: hci0: Found device firmware: intel/ibt-0040-4150.sfi [ 6.040676] Bluetooth: hci0: Boot Address: 0x100800 [ 6.040678] Bluetooth: hci0: Firmware Version: 252-24.23 [ 6.057202] zram0: detected capacity change from 0 to 33554432 [ 6.074330] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.074335] Bluetooth: BNEP filters: protocol multicast [ 6.074339] Bluetooth: BNEP socket layer initialized [ 6.156564] Adding 16777212k swap on /dev/zram0. Priority:1000 extents:1 across:16777212k SSFS [ 7.154355] rfkill: input handler disabled [ 7.461467] Bluetooth: hci0: Waiting for firmware download to complete [ 7.462132] Bluetooth: hci0: Firmware loaded in 1388180 usecs [ 7.462183] Bluetooth: hci0: Waiting for device to boot [ 7.477265] Bluetooth: hci0: Device booted in 14742 usecs [ 7.477326] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [ 7.477653] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0040-4150.ddc [ 7.479292] Bluetooth: hci0: Applying Intel DDC parameters completed [ 7.482164] Bluetooth: hci0: Firmware timestamp 2023.24 buildtype 1 build 67068 [ 7.551276] Bluetooth: MGMT ver 1.22 [ 7.553489] NET: Registered PF_ALG protocol family [ 7.565756] Bluetooth: RFCOMM TTY layer initialized [ 7.565761] Bluetooth: RFCOMM socket layer initialized [ 7.565764] Bluetooth: RFCOMM ver 1.11 [ 8.811030] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 8.811042] wlo1: 80 MHz not supported, disabling VHT [ 8.820685] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 8.883205] wlo1: authenticated [ 8.886421] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 8.907738] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 8.918016] wlo1: associated [ 9.186615] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.NPCF.DBAC], AE_NOT_FOUND (20230331/psargs-330) [ 9.186624] [ 9.186624] Initialized Local Variables for Method [_QC2]: [ 9.186625] Local0: 000000009160370d <Obj> Integer 0000000000000000 [ 9.186628] Local1: 000000008312ff7f <Obj> Integer 0000000000000006 [ 9.186630] [ 9.186631] No Arguments are initialized for method [_QC2] [ 9.186632] ACPI Error: Aborting method \_SB.PC00.LPCB.EC._QC2 due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 14.120145] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 14.455741] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 14.465089] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 14.561205] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 14.634100] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 14.699573] wlo1: authenticated [ 14.702441] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 14.705616] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 14.718185] wlo1: associated [ 15.074626] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 19.348255] FAT-fs (nvme0n1p7): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 19.582672] rfkill: input handler enabled [ 21.180495] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 21.208125] rfkill: input handler disabled [ 21.795483] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 21.799602] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 21.926427] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 21.998224] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 22.070656] wlo1: authentication with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 38.655893] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 38.655909] wlo1: 80 MHz not supported, disabling VHT [ 38.659613] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 38.690677] wlo1: authenticated [ 38.694666] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 38.711249] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 38.718232] wlo1: associated [ 41.115935] NFSD: Using nfsdcld client tracking operations. [ 41.115949] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000) [ 43.862534] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 45.044267] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 45.050091] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 45.078095] wlo1: authenticated [ 45.082745] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 45.086899] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 45.092987] wlo1: associated [ 45.179427] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 109.632705] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 109.689323] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 109.689350] wlo1: 80 MHz not supported, disabling VHT [ 109.691535] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 109.718379] wlo1: authenticated [ 109.719871] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 109.735497] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 109.742282] wlo1: associated [ 114.724513] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 114.941032] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 114.948569] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 114.975727] wlo1: authenticated [ 114.979921] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 114.983804] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 114.991504] wlo1: associated [ 115.016731] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 121.911706] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 121.919844] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 121.950236] wlo1: authenticated [ 121.954203] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 121.958165] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 121.967739] wlo1: associated [ 121.980216] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 124.611719] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 124.619157] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 124.746080] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 124.816543] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 124.869887] wlo1: authenticated [ 124.870072] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 124.878334] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 124.884537] wlo1: associated [ 124.967881] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 146.367428] wlo1: Connection to AP 7A6E44F863B67E2F6834A7CD2EB81825 lost [ 147.499842] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 147.499854] wlo1: 80 MHz not supported, disabling VHT [ 147.503044] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 147.530392] wlo1: authenticated [ 147.534323] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 147.555308] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 147.563653] wlo1: associated [ 152.613132] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 153.727904] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 153.735334] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 153.762096] wlo1: authenticated [ 153.766409] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 153.769535] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 153.775862] wlo1: associated [ 153.930574] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 159.616233] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 159.616249] wlo1: 80 MHz not supported, disabling VHT [ 159.622852] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 159.649893] wlo1: authenticated [ 159.650388] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 159.665270] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 159.674800] wlo1: associated [ 164.696910] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 165.811802] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 165.819198] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 165.915765] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 165.986255] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 166.057133] wlo1: authentication with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 167.255858] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 167.255870] wlo1: 80 MHz not supported, disabling VHT [ 167.263081] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 167.298643] wlo1: authenticated [ 167.302606] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 167.315985] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 167.329262] wlo1: associated [ 172.376960] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 179.611914] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 179.611928] wlo1: 80 MHz not supported, disabling VHT [ 179.616917] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 179.643257] wlo1: authenticated [ 179.646696] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 179.660586] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 179.670139] wlo1: associated [ 184.664933] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 190.163286] atkbd serio0: Unknown key pressed (translated set 2, code 0xc0 on isa0060/serio0). [ 190.163318] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 190.176317] msi_wmi: Unknown event received [ 190.193037] atkbd serio0: Unknown key released (translated set 2, code 0xc0 on isa0060/serio0). [ 190.193070] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 210.113069] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 210.113085] wlo1: 80 MHz not supported, disabling VHT [ 210.120605] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 210.149110] wlo1: authenticated [ 210.151766] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 210.173673] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 210.181045] wlo1: associated [ 215.385188] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 215.605180] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 215.615044] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 215.641376] wlo1: authenticated [ 215.643824] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 215.646307] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 215.653846] wlo1: associated [ 215.677837] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 287.899552] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 287.899563] wlo1: 80 MHz not supported, disabling VHT [ 287.904632] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 287.931359] wlo1: authenticated [ 287.934164] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 287.946993] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 287.958146] wlo1: associated [ 293.004779] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 294.027421] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 294.033881] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 294.060789] wlo1: authenticated [ 294.062164] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 294.065150] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 294.073576] wlo1: associated [ 294.139310] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 299.059674] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 299.059690] wlo1: 80 MHz not supported, disabling VHT [ 299.064713] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 299.092831] wlo1: authenticated [ 299.094329] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 299.111242] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 299.125505] wlo1: associated [ 304.116825] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 305.891502] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 305.898335] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 305.924782] wlo1: authenticated [ 305.930245] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 305.933393] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 305.940533] wlo1: associated [ 306.030571] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 309.843933] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 309.843946] wlo1: 80 MHz not supported, disabling VHT [ 309.849742] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 309.875654] wlo1: authenticated [ 309.882354] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 309.894845] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 309.903096] wlo1: associated [ 314.971290] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 316.463635] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 316.470767] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 316.497008] wlo1: authenticated [ 316.502337] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 316.505639] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 316.516371] wlo1: associated [ 316.551477] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 341.730837] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 341.797107] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 341.797138] wlo1: 80 MHz not supported, disabling VHT [ 341.802345] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 341.829571] wlo1: authenticated [ 341.830594] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 341.843280] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 341.857569] wlo1: associated [ 347.022665] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 347.259554] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 347.266755] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 347.293498] wlo1: authenticated [ 347.294632] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 347.303237] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 347.310719] wlo1: associated [ 347.367140] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 380.439193] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 380.505935] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 380.505970] wlo1: 80 MHz not supported, disabling VHT [ 380.510858] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 380.545603] wlo1: authenticated [ 380.546792] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 380.615933] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 380.630237] wlo1: associated [ 385.781734] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 386.016065] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 386.024437] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 386.050915] wlo1: authenticated [ 386.054743] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 386.057998] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 386.065935] wlo1: associated [ 386.074150] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 404.064389] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 404.070936] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 404.101935] wlo1: authenticated [ 404.102713] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 404.192007] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 404.241120] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 404.257916] wlo1: associated [ 404.320126] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 415.888047] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 415.893958] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 416.026799] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 416.029122] wlo1: authenticated [ 416.030727] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 416.033459] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 416.047655] wlo1: associated [ 416.124599] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 419.496243] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 419.496257] wlo1: 80 MHz not supported, disabling VHT [ 419.501098] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 419.527362] wlo1: authenticated [ 419.534815] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 419.555347] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 419.568462] wlo1: associated [ 424.694737] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 426.156202] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 426.163615] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 426.190303] wlo1: authenticated [ 426.190686] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 426.197144] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 426.208833] wlo1: associated [ 426.625418] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 458.067152] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 458.111403] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 458.111428] wlo1: 80 MHz not supported, disabling VHT [ 458.117459] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 458.144281] wlo1: authenticated [ 458.150752] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 458.164432] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 458.174306] wlo1: associated [ 463.248455] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 463.451828] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 463.458651] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 463.485277] wlo1: authenticated [ 463.486899] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 463.490494] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 463.499115] wlo1: associated [ 463.592204] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 481.792096] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 481.798632] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 481.874844] wlo1: authenticated [ 481.882810] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 481.899986] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 481.904371] wlo1: associated [ 481.922384] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 484.344224] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 484.350665] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 484.448687] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 484.522011] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 484.595431] wlo1: authentication with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 487.228364] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 487.228377] wlo1: 80 MHz not supported, disabling VHT [ 487.235013] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 487.262898] wlo1: authenticated [ 487.266957] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 487.280982] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 487.289151] wlo1: associated [ 488.933174] atkbd serio0: Unknown key pressed (translated set 2, code 0xc0 on isa0060/serio0). [ 488.933204] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 488.939780] msi_wmi: Unknown event received [ 489.172772] atkbd serio0: Unknown key released (translated set 2, code 0xc0 on isa0060/serio0). [ 489.172804] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 489.337018] atkbd serio0: Unknown key pressed (translated set 2, code 0xc0 on isa0060/serio0). [ 489.337050] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 489.348235] msi_wmi: Unknown event received [ 489.420442] atkbd serio0: Unknown key released (translated set 2, code 0xc0 on isa0060/serio0). [ 489.420472] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 489.560860] atkbd serio0: Unknown key pressed (translated set 2, code 0xc0 on isa0060/serio0). [ 489.560892] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 489.577104] msi_wmi: Unknown event received [ 489.640619] atkbd serio0: Unknown key released (translated set 2, code 0xc0 on isa0060/serio0). [ 489.640652] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 489.770436] atkbd serio0: Unknown key pressed (translated set 2, code 0xc0 on isa0060/serio0). [ 489.770475] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 489.779838] msi_wmi: Unknown event received [ 489.848774] atkbd serio0: Unknown key released (translated set 2, code 0xc0 on isa0060/serio0). [ 489.848807] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 492.433214] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 499.180499] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 499.180515] wlo1: 80 MHz not supported, disabling VHT [ 499.184115] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 499.210188] wlo1: authenticated [ 499.214842] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 499.228043] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 499.235873] wlo1: associated [ 504.465609] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 504.716176] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 504.724577] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 504.751018] wlo1: authenticated [ 504.754880] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 504.757768] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 504.765749] wlo1: associated [ 504.860732] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 527.372194] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 527.372206] wlo1: 80 MHz not supported, disabling VHT [ 527.377425] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 527.403759] wlo1: authenticated [ 527.410779] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 527.423965] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 527.438146] wlo1: associated [ 532.421145] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 534.116362] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 534.124716] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 534.152127] wlo1: authenticated [ 534.158848] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 534.162157] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 534.170477] wlo1: associated [ 534.249364] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 545.324459] wlo1: Connection to AP 7A6E44F863B67E2F6834A7CD2EB81825 lost [ 546.392368] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 546.392384] wlo1: 80 MHz not supported, disabling VHT [ 546.397376] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 546.423555] wlo1: authenticated [ 546.430868] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 546.446428] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 546.458148] wlo1: associated [ 551.570261] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 558.803912] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 558.809791] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 558.836743] wlo1: authenticated [ 558.838922] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 558.842014] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 558.848960] wlo1: associated [ 558.929141] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 565.408139] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 565.415501] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 565.444633] wlo1: authenticated [ 565.450829] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 565.454375] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 565.461453] wlo1: associated [ 565.482194] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 568.348418] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 568.348431] wlo1: 80 MHz not supported, disabling VHT [ 568.354237] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 568.381009] wlo1: authenticated [ 568.386950] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 568.401201] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 568.415132] wlo1: associated [ 571.124942] atkbd serio0: Unknown key pressed (translated set 2, code 0xc0 on isa0060/serio0). [ 571.124974] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 571.136993] msi_wmi: Unknown event received [ 571.177244] atkbd serio0: Unknown key released (translated set 2, code 0xc0 on isa0060/serio0). [ 571.177276] atkbd serio0: Use 'setkeycodes e040 <keycode>' to make it known. [ 573.433224] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 574.591982] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 574.600121] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 574.626749] wlo1: authenticated [ 574.630874] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 574.634110] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 574.641230] wlo1: associated [ 574.716215] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 606.471446] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 606.524671] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 606.524687] wlo1: 80 MHz not supported, disabling VHT [ 606.528554] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 606.558716] wlo1: authenticated [ 606.562931] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 606.576008] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 606.582439] wlo1: associated [ 611.577280] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 611.851888] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 611.860826] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 611.887802] wlo1: authenticated [ 611.890865] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 611.895127] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 611.902749] wlo1: associated [ 611.972102] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 636.588400] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 636.588413] wlo1: 80 MHz not supported, disabling VHT [ 636.593346] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 636.619780] wlo1: authenticated [ 636.627036] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 636.639817] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=3) [ 636.652243] wlo1: associated [ 641.839209] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 649.600663] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 649.605522] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 649.633200] wlo1: authenticated [ 649.635250] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 649.638114] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 649.644519] wlo1: associated [ 649.655981] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 689.321153] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 689.321165] wlo1: 80 MHz not supported, disabling VHT [ 689.327585] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 689.353890] wlo1: authenticated [ 689.355598] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 689.368582] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=3) [ 689.377055] wlo1: associated [ 694.471358] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 695.508946] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 695.514422] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 695.541556] wlo1: authenticated [ 695.546071] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 695.549572] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 695.561558] wlo1: associated [ 695.640957] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 716.335181] wlo1: Connection to AP 7A6E44F863B67E2F6834A7CD2EB81825 lost [ 718.405280] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 718.405294] wlo1: 80 MHz not supported, disabling VHT [ 718.412059] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 718.438811] wlo1: authenticated [ 718.439867] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 718.453138] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=3) [ 718.461486] wlo1: associated [ 723.451357] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 730.509584] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 730.509600] wlo1: 80 MHz not supported, disabling VHT [ 730.513172] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 730.549964] wlo1: authenticated [ 730.556075] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 730.569096] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 730.583183] wlo1: associated [ 735.739263] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 736.465576] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 736.473718] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 736.500795] wlo1: authenticated [ 736.504172] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 736.507882] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 736.519548] wlo1: associated [ 736.596962] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 768.321181] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 768.384064] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 768.384102] wlo1: 80 MHz not supported, disabling VHT [ 768.389467] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 768.417584] wlo1: authenticated [ 768.420576] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 768.433844] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 768.442067] wlo1: associated [ 773.627985] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 773.850046] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 773.858979] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 773.886063] wlo1: authenticated [ 773.888657] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 773.896187] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 773.904460] wlo1: associated [ 773.971687] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 805.289846] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 805.356163] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 805.356206] wlo1: 80 MHz not supported, disabling VHT [ 805.360885] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 805.387231] wlo1: authenticated [ 805.389021] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 805.401981] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 805.409531] wlo1: associated [ 810.493004] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 810.741800] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 810.749126] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 810.775546] wlo1: authenticated [ 810.781053] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 810.784156] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 810.791873] wlo1: associated [ 810.837160] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 822.245696] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 822.322788] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 822.322832] wlo1: 80 MHz not supported, disabling VHT [ 822.328841] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 822.356004] wlo1: authenticated [ 822.357194] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 822.370933] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 822.381211] wlo1: associated [ 827.491472] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 827.742270] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 827.749130] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 827.845387] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 827.916100] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 827.986965] wlo1: authentication with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 830.006734] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 830.006745] wlo1: 80 MHz not supported, disabling VHT [ 830.011470] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 830.039099] wlo1: authenticated [ 830.041316] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 830.057218] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 830.067954] wlo1: associated [ 835.171584] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 835.410252] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 835.416328] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 835.443070] wlo1: authenticated [ 835.445315] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 835.449088] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 835.455338] wlo1: associated [ 835.516341] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 845.391083] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 845.391096] wlo1: 80 MHz not supported, disabling VHT [ 845.396387] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 845.492954] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 2/3) [ 845.564684] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 3/3) [ 845.636840] wlo1: authentication with A1CD6EC097222A0F0A6CB0198021EBCD timed out [ 846.855205] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 846.863991] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 846.962236] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 847.037628] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 847.108259] wlo1: authentication with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 860.782575] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 860.782588] wlo1: 80 MHz not supported, disabling VHT [ 860.789092] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 860.821110] wlo1: authenticated [ 860.825570] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 860.840886] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 860.848403] wlo1: associated [ 866.250456] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 866.471270] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 866.479673] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 866.506624] wlo1: authenticated [ 866.510000] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 866.512985] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 866.519383] wlo1: associated [ 866.543698] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 898.897983] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 898.992813] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 898.992840] wlo1: 80 MHz not supported, disabling VHT [ 898.997769] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 899.024847] wlo1: authenticated [ 899.029655] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 899.044829] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 899.050541] wlo1: associated [ 904.190036] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 904.427065] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 904.434733] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 904.461711] wlo1: authenticated [ 904.465743] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 904.469546] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 904.477141] wlo1: associated [ 904.535006] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 936.482308] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 936.530929] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 936.530953] wlo1: 80 MHz not supported, disabling VHT [ 936.534921] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 936.573076] wlo1: authenticated [ 936.573945] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 936.592672] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 936.857581] wlo1: associated [ 941.669028] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 941.922949] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 941.929886] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 941.956363] wlo1: authenticated [ 941.957968] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 941.961395] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 941.968169] wlo1: associated [ 942.012977] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 973.754424] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 973.825805] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 973.825825] wlo1: 80 MHz not supported, disabling VHT [ 973.829896] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 973.857335] wlo1: authenticated [ 973.858202] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 973.876989] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 973.890361] wlo1: associated [ 978.892299] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 979.115337] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 979.122347] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 979.149293] wlo1: authenticated [ 979.150252] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 979.153740] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 979.161054] wlo1: associated [ 979.184961] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 985.439832] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 985.439848] wlo1: 80 MHz not supported, disabling VHT [ 985.444733] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 985.472240] wlo1: authenticated [ 985.474348] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 985.496931] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 985.507368] wlo1: associated [ 990.464140] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 990.687670] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 990.695075] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 990.791552] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 990.862159] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 990.932966] wlo1: authentication with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 1004.111511] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1004.117947] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1004.144509] wlo1: authenticated [ 1004.146424] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1004.159590] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1004.170474] wlo1: associated [ 1004.170500] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1014.976020] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1014.980827] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1015.077291] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 1015.148090] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 1015.219085] wlo1: authentication with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 1016.859892] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1016.859904] wlo1: 80 MHz not supported, disabling VHT [ 1016.866062] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1016.902675] wlo1: authenticated [ 1016.906497] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1016.922147] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1016.933126] wlo1: associated [ 1022.106148] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1029.120188] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1029.120203] wlo1: 80 MHz not supported, disabling VHT [ 1029.125244] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1029.152791] wlo1: authenticated [ 1029.154699] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1029.171415] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1029.184513] wlo1: associated [ 1034.394195] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1042.964435] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1042.964452] wlo1: 80 MHz not supported, disabling VHT [ 1042.969468] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1042.996857] wlo1: authenticated [ 1042.998757] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1043.019816] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1043.027886] wlo1: associated [ 1048.218332] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1061.373689] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1061.373702] wlo1: 80 MHz not supported, disabling VHT [ 1061.378343] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1061.406219] wlo1: authenticated [ 1061.406833] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1061.428371] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1061.438866] wlo1: associated [ 1066.650433] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1083.972389] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1083.972402] wlo1: 80 MHz not supported, disabling VHT [ 1083.979474] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1084.010097] wlo1: authenticated [ 1084.015134] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1084.039083] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1084.046969] wlo1: associated [ 1089.178482] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1095.940475] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1095.940488] wlo1: 80 MHz not supported, disabling VHT [ 1095.946881] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1096.041767] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 2/3) [ 1096.062981] wlo1: authenticated [ 1096.067177] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1096.158074] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 2/3) [ 1096.231607] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 3/3) [ 1096.316824] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1096.325301] wlo1: associated [ 1100.430605] wlo1: disassociated from A1CD6EC097222A0F0A6CB0198021EBCD (Reason: 2=PREV_AUTH_NOT_VALID) [ 1101.312477] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1101.312491] wlo1: 80 MHz not supported, disabling VHT [ 1101.318979] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1101.414817] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 2/3) [ 1101.488803] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 3/3) [ 1101.521147] wlo1: authenticated [ 1101.523174] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1101.555323] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1101.568559] wlo1: associated [ 1106.586711] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1109.000601] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1109.008127] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1109.035131] wlo1: authenticated [ 1109.039172] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1109.042087] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1109.053843] wlo1: associated [ 1109.133342] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1113.540446] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1113.540459] wlo1: 80 MHz not supported, disabling VHT [ 1113.545932] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1113.578412] wlo1: authenticated [ 1113.583153] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1113.595733] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1113.604199] wlo1: associated [ 1118.773388] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1119.051996] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1119.058707] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1119.107071] wlo1: authenticated [ 1119.111182] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1119.121282] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1119.133885] wlo1: associated [ 1119.169027] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1124.936547] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1124.944131] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1124.974597] wlo1: authenticated [ 1124.979269] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1125.087424] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 1125.094061] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1125.098594] wlo1: associated [ 1125.106876] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1138.764560] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1138.771108] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1138.963333] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 1138.982742] wlo1: authenticated [ 1138.987330] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1138.991955] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1138.997658] wlo1: associated [ 1139.052764] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1143.572807] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1143.572823] wlo1: 80 MHz not supported, disabling VHT [ 1143.577801] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1143.626917] wlo1: authenticated [ 1143.631326] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1143.648540] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1143.662053] wlo1: associated [ 1148.777157] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1150.328714] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1150.336205] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1150.368594] wlo1: authenticated [ 1150.375368] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1150.378756] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1150.386661] wlo1: associated [ 1150.400559] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1165.984703] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1165.992435] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1166.084612] wlo1: authenticated [ 1166.087400] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1166.160707] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 1166.232793] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 1166.317944] wlo1: association with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 1173.644946] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1173.644959] wlo1: 80 MHz not supported, disabling VHT [ 1173.649066] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1173.678265] wlo1: authenticated [ 1173.683408] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1173.703576] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1173.713727] wlo1: associated [ 1178.831639] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1179.088405] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1179.094398] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1179.121455] wlo1: authenticated [ 1179.123393] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1179.126741] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1179.132717] wlo1: associated [ 1179.176837] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1210.896596] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 1210.962562] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1210.962579] wlo1: 80 MHz not supported, disabling VHT [ 1210.968570] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1210.996936] wlo1: authenticated [ 1211.003536] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1211.025189] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1211.035494] wlo1: associated [ 1216.054721] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1222.332535] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1222.332550] wlo1: 80 MHz not supported, disabling VHT [ 1222.337002] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1222.369308] wlo1: authenticated [ 1222.371612] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1222.388975] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=6) [ 1222.397987] wlo1: associated [ 1227.574971] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1227.796925] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1227.805332] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1227.832709] wlo1: authenticated [ 1227.839656] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1227.842965] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1227.851048] wlo1: associated [ 1227.918531] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1259.166915] wlo1: Connection to AP 7A6E44F863B67E2F6834A7CD2EB81825 lost [ 1581.551435] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1581.559894] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1581.586663] wlo1: authenticated [ 1581.590274] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1581.593776] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1581.605494] wlo1: associated [ 1581.614000] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1586.875574] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1586.875590] wlo1: 80 MHz not supported, disabling VHT [ 1586.881709] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1586.909549] wlo1: authenticated [ 1586.910206] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1586.938337] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 1586.948421] wlo1: associated [ 1592.381200] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1594.210864] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1594.217320] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1594.314115] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 1594.387028] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 1594.458005] wlo1: authentication with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 1601.421912] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1601.421925] wlo1: 80 MHz not supported, disabling VHT [ 1601.428292] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1601.455570] wlo1: authenticated [ 1601.456711] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1601.472154] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 1601.480279] wlo1: associated [ 1606.461145] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1683.522175] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1683.522187] wlo1: 80 MHz not supported, disabling VHT [ 1683.529016] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1683.556566] wlo1: authenticated [ 1683.557219] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1683.574030] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 1683.581465] wlo1: associated [ 1688.638486] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1688.886058] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1688.893905] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1688.920681] wlo1: authenticated [ 1688.925160] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1688.928710] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1688.936037] wlo1: associated [ 1688.936064] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1696.507499] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1696.507511] wlo1: 80 MHz not supported, disabling VHT [ 1696.515013] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1696.545792] wlo1: authenticated [ 1696.550080] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1696.593027] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 1696.609165] wlo1: associated [ 1701.746241] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1702.032270] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1702.040376] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1702.170850] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 1702.242504] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 1702.313979] wlo1: authentication with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 1704.192281] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1704.192293] wlo1: 80 MHz not supported, disabling VHT [ 1704.199403] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1704.327127] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 2/3) [ 1704.398464] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 3/3) [ 1704.471485] wlo1: authentication with A1CD6EC097222A0F0A6CB0198021EBCD timed out [ 1745.748965] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1745.748977] wlo1: 80 MHz not supported, disabling VHT [ 1745.757294] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1745.784082] wlo1: authenticated [ 1745.791632] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1745.804927] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 1745.812839] wlo1: associated [ 1751.154559] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1751.381272] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1751.390752] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1751.417539] wlo1: authenticated [ 1751.419756] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1751.422836] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1751.429709] wlo1: associated [ 1751.499892] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1769.620593] FAT-fs (nvme0n1p7): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 1783.041381] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 1783.117163] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1783.117196] wlo1: 80 MHz not supported, disabling VHT [ 1783.121051] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1783.148456] wlo1: authenticated [ 1783.152581] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1783.169672] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 1783.177875] wlo1: associated [ 1788.281197] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1788.509582] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1788.514923] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1788.541630] wlo1: authenticated [ 1788.548663] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1788.551758] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1788.558747] wlo1: associated [ 1788.567895] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1820.101306] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 1820.155416] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1820.155432] wlo1: 80 MHz not supported, disabling VHT [ 1820.159913] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1820.185856] wlo1: authenticated [ 1820.193066] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1820.209489] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 1820.216556] wlo1: associated [ 1825.446921] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1825.678438] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1825.685413] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1825.711716] wlo1: authenticated [ 1825.713053] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1825.715599] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1825.722921] wlo1: associated [ 1825.739645] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1840.616844] mmap: wavparse0:sink (70343): VmData 538062848 exceed data ulimit 537311602. Update limits or use boot option ignore_rlimit_data. [ 1857.561626] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 1857.637053] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1857.637073] wlo1: 80 MHz not supported, disabling VHT [ 1857.639432] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1857.666334] wlo1: authenticated [ 1857.669378] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1857.688513] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 1857.694922] wlo1: associated [ 1862.874585] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1863.122156] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1863.127068] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1863.153641] wlo1: authenticated [ 1863.157497] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1863.165680] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1863.172207] wlo1: associated [ 1863.218578] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1958.634934] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 1958.693047] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1958.693091] wlo1: 80 MHz not supported, disabling VHT [ 1958.698632] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1958.730842] wlo1: authenticated [ 1958.738335] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1958.751561] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 1958.758600] wlo1: associated [ 1963.841826] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 1964.067572] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 1964.076372] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1964.103023] wlo1: authenticated [ 1964.106383] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 1964.110594] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 1964.119719] wlo1: associated [ 1964.186335] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 1995.911374] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 1995.973552] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 1995.973574] wlo1: 80 MHz not supported, disabling VHT [ 1995.978266] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1996.004842] wlo1: authenticated [ 1996.006630] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 1996.019879] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 1996.027058] wlo1: associated [ 2001.222527] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2001.431755] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2001.438595] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2001.465381] wlo1: authenticated [ 2001.466712] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2001.487278] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2001.494353] wlo1: associated [ 2004.955910] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2004.955922] wlo1: 80 MHz not supported, disabling VHT [ 2004.960723] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2004.986660] wlo1: authenticated [ 2004.990821] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2005.007927] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2005.022472] wlo1: associated [ 2010.182516] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2010.403759] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2010.412138] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2010.438548] wlo1: authenticated [ 2010.442756] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2010.446001] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2010.453330] wlo1: associated [ 2010.472240] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2013.899932] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2013.899945] wlo1: 80 MHz not supported, disabling VHT [ 2013.904252] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2013.931890] wlo1: authenticated [ 2013.934804] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2013.947494] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2013.957355] wlo1: associated [ 2019.191319] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2019.424156] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2019.431402] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2019.457946] wlo1: authenticated [ 2019.458819] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2019.462637] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2019.469164] wlo1: associated [ 2019.483772] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2023.680028] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2023.680041] wlo1: 80 MHz not supported, disabling VHT [ 2023.686038] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2023.713816] wlo1: authenticated [ 2023.714843] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2023.731602] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2023.739710] wlo1: associated [ 2028.714546] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2028.980086] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2028.987407] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2029.014153] wlo1: authenticated [ 2029.014905] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2029.017850] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2029.026049] wlo1: associated [ 2029.109012] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2062.783522] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2062.835352] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2062.835377] wlo1: 80 MHz not supported, disabling VHT [ 2062.838448] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2062.865355] wlo1: authenticated [ 2062.871178] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2062.884077] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2062.890294] wlo1: associated [ 2067.934014] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2068.184258] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2068.189980] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2068.216449] wlo1: authenticated [ 2068.219234] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2068.222925] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2068.231078] wlo1: associated [ 2068.231112] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2136.561129] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2136.561141] wlo1: 80 MHz not supported, disabling VHT [ 2136.565347] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2136.591602] wlo1: authenticated [ 2136.595892] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2136.609994] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2136.618057] wlo1: associated [ 2141.714038] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2141.981185] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2141.989696] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2142.016093] wlo1: authenticated [ 2142.020032] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2142.023221] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2142.034927] wlo1: associated [ 2142.059627] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2173.925262] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2174.006727] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2174.006751] wlo1: 80 MHz not supported, disabling VHT [ 2174.009245] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2174.037380] wlo1: authenticated [ 2174.040244] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2174.055307] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2174.063093] wlo1: associated [ 2179.193830] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2179.401221] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2179.408399] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2179.434860] wlo1: authenticated [ 2179.436181] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2179.439585] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2179.447569] wlo1: associated [ 2179.537056] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2207.546414] show_signal_msg: 20 callbacks suppressed [ 2207.546416] file-roller[76983]: segfault at f8 ip 00007f750c4eea5d sp 00007fff9c902280 error 4 in libgdk-3.so.0.2404.29[7f750c494000+83000] likely on CPU 4 (core 8, socket 0) [ 2207.546424] Code: ff 41 83 48 44 40 41 8b 44 24 48 41 89 40 78 e9 82 fe ff ff e8 a4 a3 fa ff 0f 1f 40 00 f3 0f 1e fa 55 53 48 89 fb 48 83 ec 08 <48> 3b bf f8 00 00 00 75 7a 48 8b 6b 18 e8 01 e4 fe ff 48 89 c6 48 [ 2211.873063] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2211.949346] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2211.949367] wlo1: 80 MHz not supported, disabling VHT [ 2211.953011] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2212.084598] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 2/3) [ 2212.188524] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 3/3) [ 2212.292514] wlo1: authentication with A1CD6EC097222A0F0A6CB0198021EBCD timed out [ 2213.289728] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2213.297147] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2213.428542] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 2213.430267] wlo1: authenticated [ 2213.436211] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2213.439165] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2213.455027] wlo1: associated [ 2213.543159] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2311.073853] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2311.125461] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2311.125475] wlo1: 80 MHz not supported, disabling VHT [ 2311.128810] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2311.157155] wlo1: authenticated [ 2311.161388] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2311.174765] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2311.197005] wlo1: associated [ 2316.257109] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2322.506745] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2322.506758] wlo1: 80 MHz not supported, disabling VHT [ 2322.509500] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2322.537599] wlo1: authenticated [ 2322.545511] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2322.558475] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2322.565987] wlo1: associated [ 2325.444884] capability: warning: `gvfsd-admin' uses 32-bit capabilities (legacy support in use) [ 2327.777210] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2328.026354] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2328.032813] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2328.059433] wlo1: authenticated [ 2328.061539] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2328.065272] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2328.070676] wlo1: associated [ 2328.122939] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2369.311387] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2369.311404] wlo1: 80 MHz not supported, disabling VHT [ 2369.315566] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2369.343974] wlo1: authenticated [ 2369.345932] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2369.358693] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2369.370464] wlo1: associated [ 2374.473964] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2374.698925] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2374.709168] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2374.805925] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 2374.877004] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 2374.951134] wlo1: authentication with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 2376.903641] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2376.903657] wlo1: 80 MHz not supported, disabling VHT [ 2376.908790] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2376.937094] wlo1: authenticated [ 2376.937984] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2376.954075] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2376.962673] wlo1: associated [ 2382.153666] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2382.387158] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2382.393283] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2382.489640] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 2382.622031] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 2382.627256] wlo1: authenticated [ 2382.634091] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2382.639456] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2382.652193] wlo1: associated [ 2384.546308] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2414.650746] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2414.735976] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2414.736007] wlo1: 80 MHz not supported, disabling VHT [ 2414.738866] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2414.767489] wlo1: authenticated [ 2414.770307] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2414.783215] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2414.791694] wlo1: associated [ 2419.785845] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2420.035283] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2420.039107] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2420.066042] wlo1: authenticated [ 2420.070316] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2420.088242] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2420.095255] wlo1: associated [ 2420.181973] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2430.015621] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2430.015633] wlo1: 80 MHz not supported, disabling VHT [ 2430.020478] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2430.047197] wlo1: authenticated [ 2430.050398] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2430.067283] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2430.074247] wlo1: associated [ 2435.300634] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2437.107572] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2437.111693] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2437.139040] wlo1: authenticated [ 2437.142512] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2437.145611] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2437.152279] wlo1: associated [ 2437.179909] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2448.857130] file-roller[92298]: segfault at f8 ip 00007f0946b6da5d sp 00007ffee7f603e0 error 4 in libgdk-3.so.0.2404.29[7f0946b13000+83000] likely on CPU 4 (core 8, socket 0) [ 2448.857138] Code: ff 41 83 48 44 40 41 8b 44 24 48 41 89 40 78 e9 82 fe ff ff e8 a4 a3 fa ff 0f 1f 40 00 f3 0f 1e fa 55 53 48 89 fb 48 83 ec 08 <48> 3b bf f8 00 00 00 75 7a 48 8b 6b 18 e8 01 e4 fe ff 48 89 c6 48 [ 2476.313023] wlo1: Connection to AP 7A6E44F863B67E2F6834A7CD2EB81825 lost [ 2483.872138] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2483.872153] wlo1: 80 MHz not supported, disabling VHT [ 2483.876864] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2483.909355] wlo1: authenticated [ 2483.910872] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2483.926441] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2483.936820] wlo1: associated [ 2489.163197] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2497.295994] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2497.296007] wlo1: 80 MHz not supported, disabling VHT [ 2497.301210] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2497.333223] wlo1: authenticated [ 2497.339021] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2497.365821] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2497.402914] wlo1: associated [ 2502.475240] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2509.976228] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2509.976240] wlo1: 80 MHz not supported, disabling VHT [ 2509.980969] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2510.008267] wlo1: authenticated [ 2510.011201] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2510.027613] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2510.034888] wlo1: associated [ 2515.019497] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2522.136818] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2522.136830] wlo1: 80 MHz not supported, disabling VHT [ 2522.140933] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2522.174849] wlo1: authenticated [ 2522.179238] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2522.195242] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2522.211503] wlo1: associated [ 2527.307449] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2527.532230] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2527.538806] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2527.707347] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 2527.811349] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 2527.813232] wlo1: authenticated [ 2527.819344] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2527.826124] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2527.832486] wlo1: associated [ 2528.010035] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2621.920494] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2621.981746] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2621.981823] wlo1: 80 MHz not supported, disabling VHT [ 2621.986358] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2622.016995] wlo1: authenticated [ 2622.020145] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2622.036746] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2622.047303] wlo1: associated [ 2627.046139] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2627.257057] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2627.263802] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2627.292368] wlo1: authenticated [ 2627.300223] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2627.303432] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2627.309940] wlo1: associated [ 2627.339692] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2649.045764] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2649.045780] wlo1: 80 MHz not supported, disabling VHT [ 2649.051400] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2649.188432] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 2/3) [ 2649.292413] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 3/3) [ 2649.400424] wlo1: authentication with A1CD6EC097222A0F0A6CB0198021EBCD timed out [ 2651.113876] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2651.118620] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2651.148527] wlo1: authenticated [ 2651.152440] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2651.158528] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2651.164784] wlo1: associated [ 2651.218297] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2660.645712] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2660.747336] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2660.747420] wlo1: 80 MHz not supported, disabling VHT [ 2660.750673] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2660.777689] wlo1: authenticated [ 2660.780467] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2660.794994] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2660.801898] wlo1: associated [ 2665.806484] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2666.053491] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2666.059872] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2666.087289] wlo1: authenticated [ 2666.088547] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2666.091771] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2666.098370] wlo1: associated [ 2666.150733] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2692.894331] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2692.901714] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2693.028970] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 2693.030624] wlo1: authenticated [ 2693.032817] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2693.035819] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2693.049037] wlo1: associated [ 2693.183883] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2696.554373] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2696.558672] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2696.654544] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 2696.695361] wlo1: authenticated [ 2696.700780] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2696.737579] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2696.756729] wlo1: associated [ 2696.768594] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2701.034605] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2701.042526] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2701.228948] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 2701.258114] wlo1: authenticated [ 2701.260921] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2701.335288] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 2701.400098] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2701.417789] wlo1: associated [ 2701.486388] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2703.354101] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2703.360716] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2703.458984] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 2/3) [ 2703.531079] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 3/3) [ 2703.603304] wlo1: authentication with 7A6E44F863B67E2F6834A7CD2EB81825 timed out [ 2718.178365] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2718.178378] wlo1: 80 MHz not supported, disabling VHT [ 2718.185533] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2718.215696] wlo1: authenticated [ 2718.217032] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2718.299109] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2718.304787] wlo1: associated [ 2723.458927] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2723.698324] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2723.707312] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2723.734010] wlo1: authenticated [ 2723.737122] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2723.749015] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2723.761019] wlo1: associated [ 2723.906111] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2766.773885] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2766.829706] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2766.829758] wlo1: 80 MHz not supported, disabling VHT [ 2766.833805] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2766.869369] wlo1: authenticated [ 2766.872988] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2766.887528] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2766.896498] wlo1: associated [ 2772.048094] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2772.262188] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2772.268655] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2772.295479] wlo1: authenticated [ 2772.301049] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2772.304091] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2772.313954] wlo1: associated [ 2772.340518] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2862.254863] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2862.319135] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2862.319160] wlo1: 80 MHz not supported, disabling VHT [ 2862.325441] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2862.351951] wlo1: authenticated [ 2862.354120] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2862.368740] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2862.382646] wlo1: associated [ 2867.587881] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2867.799511] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2867.807405] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2867.833924] wlo1: authenticated [ 2867.834125] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2867.837441] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2867.843637] wlo1: associated [ 2867.985446] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2901.078979] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2901.123839] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2901.123854] wlo1: 80 MHz not supported, disabling VHT [ 2901.126487] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2901.270606] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 2/3) [ 2901.378661] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 3/3) [ 2901.382637] wlo1: authenticated [ 2901.386634] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2901.407437] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2901.412283] wlo1: associated [ 2906.399221] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2906.603422] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2906.607983] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2906.634358] wlo1: authenticated [ 2906.634597] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2906.636985] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2906.644499] wlo1: associated [ 2906.692292] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2939.287827] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2939.334490] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2939.334513] wlo1: 80 MHz not supported, disabling VHT [ 2939.340074] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2939.368100] wlo1: authenticated [ 2939.371125] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2939.386492] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2939.393838] wlo1: associated [ 2944.595037] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2944.784435] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2944.793690] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2944.820574] wlo1: authenticated [ 2944.823180] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2944.828461] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2944.837218] wlo1: associated [ 2944.888168] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 2976.555941] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 2976.627563] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 2976.627587] wlo1: 80 MHz not supported, disabling VHT [ 2976.631404] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2976.657538] wlo1: authenticated [ 2976.659544] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 2976.676744] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 2976.684523] wlo1: associated [ 2981.766634] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 2981.984389] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 2981.992217] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2982.018920] wlo1: authenticated [ 2982.019531] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 2982.022438] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 2982.030041] wlo1: associated [ 2982.059678] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3058.140778] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3058.201249] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3058.201267] wlo1: 80 MHz not supported, disabling VHT [ 3058.203972] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3058.239670] wlo1: authenticated [ 3058.240516] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3058.254107] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3058.260068] wlo1: associated [ 3063.482854] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3063.709715] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3063.717582] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3063.744367] wlo1: authenticated [ 3063.748540] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3063.752688] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3063.759414] wlo1: associated [ 3063.775942] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3096.841757] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3096.898745] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3096.898776] wlo1: 80 MHz not supported, disabling VHT [ 3096.904894] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3096.931943] wlo1: authenticated [ 3096.933028] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3096.956232] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3096.964223] wlo1: associated [ 3102.191202] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3102.870560] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3102.879461] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3102.906225] wlo1: authenticated [ 3102.909111] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3102.911596] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3102.919232] wlo1: associated [ 3103.002539] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3134.734100] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3134.803538] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3134.803568] wlo1: 80 MHz not supported, disabling VHT [ 3134.809497] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3134.836861] wlo1: authenticated [ 3134.841449] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3134.860460] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3134.872153] wlo1: associated [ 3140.028779] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3140.226955] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3140.235235] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3140.261683] wlo1: authenticated [ 3140.265595] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3140.269128] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3140.281729] wlo1: associated [ 3140.281764] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3172.158745] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3172.242927] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3172.242938] wlo1: 80 MHz not supported, disabling VHT [ 3172.247285] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3172.273767] wlo1: authenticated [ 3172.281881] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3172.294802] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3172.301301] wlo1: associated [ 3177.405235] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3177.631271] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3177.639783] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3177.666907] wlo1: authenticated [ 3177.674071] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3177.677026] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3177.686584] wlo1: associated [ 3177.748798] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3209.471218] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3209.529879] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3209.529928] wlo1: 80 MHz not supported, disabling VHT [ 3209.534539] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3209.563861] wlo1: authenticated [ 3209.566405] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3209.579379] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3209.593827] wlo1: associated [ 3214.786161] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3215.011275] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3215.017980] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3215.044348] wlo1: authenticated [ 3215.046459] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3215.050587] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3215.062909] wlo1: associated [ 3215.126098] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3232.623210] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3232.670714] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3232.670728] wlo1: 80 MHz not supported, disabling VHT [ 3232.675055] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3232.702990] wlo1: authenticated [ 3232.710680] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3232.725476] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3232.735240] wlo1: associated [ 3237.924657] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3238.139644] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3238.146252] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3238.172960] wlo1: authenticated [ 3238.174757] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3238.177613] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3238.185278] wlo1: associated [ 3238.268005] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3271.447591] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3271.492856] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3271.492877] wlo1: 80 MHz not supported, disabling VHT [ 3271.497039] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3271.527939] wlo1: authenticated [ 3271.531174] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3271.544448] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3271.554696] wlo1: associated [ 3276.581190] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3276.760131] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3276.768238] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3276.794808] wlo1: authenticated [ 3276.795169] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3276.798178] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3276.806679] wlo1: associated [ 3276.874185] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3291.768167] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3291.828759] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3291.828790] wlo1: 80 MHz not supported, disabling VHT [ 3291.832485] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3291.860343] wlo1: authenticated [ 3291.863482] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3291.876499] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3291.883396] wlo1: associated [ 3297.018662] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3297.228966] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3297.238516] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3297.265355] wlo1: authenticated [ 3297.267617] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3297.271533] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3297.281109] wlo1: associated [ 3297.354034] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3329.221218] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3329.286439] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3329.286474] wlo1: 80 MHz not supported, disabling VHT [ 3329.292376] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3329.319145] wlo1: authenticated [ 3329.319820] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3329.332479] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3329.346270] wlo1: associated [ 3334.643083] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3334.861264] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3334.871486] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3334.897923] wlo1: authenticated [ 3334.900048] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3334.903014] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3334.911379] wlo1: associated [ 3334.938463] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3387.986433] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3387.986450] wlo1: 80 MHz not supported, disabling VHT [ 3387.989938] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3388.016581] wlo1: authenticated [ 3388.020644] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3388.041058] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3388.050440] wlo1: associated [ 3393.062616] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3394.366003] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3394.373508] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3394.400017] wlo1: authenticated [ 3394.400637] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3394.404210] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3394.412241] wlo1: associated [ 3394.458178] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3400.533929] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3400.533943] wlo1: 80 MHz not supported, disabling VHT [ 3400.538055] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3400.566054] wlo1: authenticated [ 3400.568741] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3400.583606] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3400.590157] wlo1: associated [ 3405.710178] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3406.721960] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3406.725907] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3406.752445] wlo1: authenticated [ 3406.752784] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3406.755615] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3406.762947] wlo1: associated [ 3406.829978] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3438.205994] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3438.258870] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3438.258899] wlo1: 80 MHz not supported, disabling VHT [ 3438.263387] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3438.290822] wlo1: authenticated [ 3438.293215] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3438.306165] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3438.316402] wlo1: associated [ 3443.444971] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3443.658667] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3443.667885] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3443.695334] wlo1: authenticated [ 3443.697334] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3443.700997] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3443.715742] wlo1: associated [ 3443.788458] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3467.558258] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3467.606966] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3467.606997] wlo1: 80 MHz not supported, disabling VHT [ 3467.612123] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3467.645505] wlo1: authenticated [ 3467.649570] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3467.669577] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3467.683928] wlo1: associated [ 3472.885433] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3474.310994] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3474.321130] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3474.347922] wlo1: authenticated [ 3474.349620] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3474.353906] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3474.361626] wlo1: associated [ 3474.423086] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3505.834498] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3505.893496] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3505.893541] wlo1: 80 MHz not supported, disabling VHT [ 3505.898188] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3505.929117] wlo1: authenticated [ 3505.930051] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3505.943432] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3505.949604] wlo1: associated [ 3511.029954] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3511.259331] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3511.267928] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3511.295004] wlo1: authenticated [ 3511.298171] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3511.301497] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3511.314212] wlo1: associated [ 3511.373634] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3543.711305] wlo1: disconnect from AP 7A6E44F863B67E2F6834A7CD2EB81825 for new auth to A1CD6EC097222A0F0A6CB0198021EBCD [ 3543.757457] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3543.757520] wlo1: 80 MHz not supported, disabling VHT [ 3543.763130] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3543.792951] wlo1: authenticated [ 3543.794526] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3543.807696] wlo1: RX ReassocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3543.815604] wlo1: associated [ 3548.926365] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3549.139807] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3549.148869] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3549.175386] wlo1: authenticated [ 3549.178658] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3549.181420] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3549.195238] wlo1: associated [ 3549.262163] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3562.127741] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3562.127757] wlo1: 80 MHz not supported, disabling VHT [ 3562.132806] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3562.162770] wlo1: authenticated [ 3562.166746] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3562.179919] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3562.188635] wlo1: associated [ 3567.351057] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3568.316265] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3568.325566] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3568.352318] wlo1: authenticated [ 3568.354783] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3568.358336] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3568.372874] wlo1: associated [ 3568.424376] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3593.316548] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3593.316562] wlo1: 80 MHz not supported, disabling VHT [ 3593.322824] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3593.352644] wlo1: authenticated [ 3593.359357] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3593.370984] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3593.382132] wlo1: associated [ 3598.378796] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3599.452546] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3599.459507] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3599.486475] wlo1: authenticated [ 3599.487146] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3599.490021] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3599.497535] wlo1: associated [ 3599.576490] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3612.316698] wlo1: authenticate with A1CD6EC097222A0F0A6CB0198021EBCD [ 3612.316712] wlo1: 80 MHz not supported, disabling VHT [ 3612.322356] wlo1: send auth to A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3612.348746] wlo1: authenticated [ 3612.351411] wlo1: associate with A1CD6EC097222A0F0A6CB0198021EBCD (try 1/3) [ 3612.373436] wlo1: RX AssocResp from A1CD6EC097222A0F0A6CB0198021EBCD (capab=0x431 status=0 aid=4) [ 3612.383192] wlo1: associated [ 3617.476636] wlo1: Connection to AP A1CD6EC097222A0F0A6CB0198021EBCD lost [ 3619.236382] wlo1: authenticate with 7A6E44F863B67E2F6834A7CD2EB81825 [ 3619.242537] wlo1: send auth to 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3619.269025] wlo1: authenticated [ 3619.271436] wlo1: associate with 7A6E44F863B67E2F6834A7CD2EB81825 (try 1/3) [ 3619.274604] wlo1: RX AssocResp from 7A6E44F863B67E2F6834A7CD2EB81825 (capab=0x511 status=0 aid=2) [ 3619.280911] wlo1: associated [ 3619.329509] wlo1: Limiting TX power to 23 (23 - 0) dBm as advertised by 7A6E44F863B67E2F6834A7CD2EB81825 [ 3633.054702] rfkill: input handler enabled [ 3633.271888] nfsd: last server has exited, flushing export cache [ 3633.863940] wlo1: deauthenticating from 7A6E44F863B67E2F6834A7CD2EB81825 by local choice (Reason: 3=DEAUTH_LEAVING) [ 3634.109046] ACPI BIOS Error (bug): Could not resolve symbol [\_TZ.ETMD], AE_NOT_FOUND (20230331/psargs-330) [ 3634.109054] [ 3634.109055] No Local Variables are initialized for Method [_OSC] [ 3634.109056] Initialized Arguments for Method [_OSC]: (4 arguments defined for method invocation) [ 3634.109056] Arg0: 00000000a99d4795 <Obj> Buffer(16) 5D A8 3B B2 B7 C8 42 35 [ 3634.109062] Arg1: 000000000a4db42f <Obj> Integer 0000000000000001 [ 3634.109064] Arg2: 00000000a91ec6c0 <Obj> Integer 0000000000000002 [ 3634.109066] Arg3: 00000000be7f6ac8 <Obj> Buffer(8) 00 00 00 00 00 00 00 00 [ 3634.109070] [ 3634.109070] ACPI Error: Aborting method \_SB.IETM._OSC due to previous error (AE_NOT_FOUND) (20230331/psparse-529) [ 3635.228647] EXT4-fs (nvme0n1p2): unmounting filesystem HASH_4E1-0DDC-B2A0-D907-5FE5F5BC1155.