10: PCI 18.3: 0600 Host bridge [Created at pci.386] Unique ID: Fhhh.+V6VV7woehA SysFS ID: /devices/pci0000:00/0000:00:18.3 SysFS BusID: 0000:00:18.3 Hardware Class: bridge Model: "AMD Family 10h Processor Miscellaneous Control" Vendor: pci 0x1022 "AMD" Device: pci 0x1203 "Family 10h Processor Miscellaneous Control" Driver: "k10temp" Driver Modules: "k10temp" Module Alias: "pci:v00001022d00001203sv00000000sd00000000bc06sc00i00" Driver Info #0: Driver Status: k10temp is active Driver Activation Cmd: "modprobe k10temp" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 13.2: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 06bT.jPsMPYxld01 SysFS ID: /devices/pci0000:00/0000:00:13.2 SysFS BusID: 0000:00:13.2 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4396 "SB7x0/SB8x0/SB9x0 USB EHCI Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Driver: "ehci-pci" Memory Range: 0xfcfff400-0xfcfff4ff (rw,non-prefetchable) IRQ: 19 (10616 events) Module Alias: "pci:v00001002d00004396sv00001043sd00008389bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 18.1: 0600 Host bridge [Created at pci.386] Unique ID: W1j0.zgD+X_gObw9 SysFS ID: /devices/pci0000:00/0000:00:18.1 SysFS BusID: 0000:00:18.1 Hardware Class: bridge Model: "AMD Family 10h Processor Address Map" Vendor: pci 0x1022 "AMD" Device: pci 0x1201 "Family 10h Processor Address Map" Module Alias: "pci:v00001022d00001201sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 200.0: 0200 Ethernet controller [Created at pci.386] Unique ID: c3qJ.2dzJn7ktuZF Parent ID: 8otl.W3WSIukN6R8 SysFS ID: /devices/pci0000:00/0000:00:04.0/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8432 "P8P67 and other motherboards" Revision: 0x06 Driver: "r8169" Driver Modules: "r8169" Device File: enp2s0 I/O Ports: 0xe800-0xe8ff (rw) Memory Range: 0xfbfff000-0xfbffffff (ro,non-prefetchable) Memory Range: 0xfbff8000-0xfbffbfff (ro,non-prefetchable) IRQ: 16 (1460 events) HW Address: C4C1821CB515E576E500E7082FAE1EE8 Permanent HW Address: C4C1821CB515E576E500E7082FAE1EE8 Link detected: yes Module Alias: "pci:v000010ECd00008168sv00001043sd00008432bc02sc00i00" Driver Info #0: Driver Status: r8169 is active Driver Activation Cmd: "modprobe r8169" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) 14: PCI 14.5: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: hB6S.0fuWihmxabA SysFS ID: /devices/pci0000:00/0000:00:14.5 SysFS BusID: 0000:00:14.5 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4399 "SB7x0/SB8x0/SB9x0 USB OHCI2 Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Driver: "ohci-pci" Memory Range: 0xfcffa000-0xfcffafff (rw,non-prefetchable) IRQ: 18 (3 events) Module Alias: "pci:v00001002d00004399sv00001043sd00008389bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 13.0: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: HSco._p+0lYXXXq9 SysFS ID: /devices/pci0000:00/0000:00:13.0 SysFS BusID: 0000:00:13.0 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4397 "SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Driver: "ohci-pci" Memory Range: 0xfcffc000-0xfcffcfff (rw,non-prefetchable) IRQ: 18 (3 events) Module Alias: "pci:v00001002d00004397sv00001043sd00008389bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 04.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: 8otl.W3WSIukN6R8 SysFS ID: /devices/pci0000:00/0000:00:04.0 SysFS BusID: 0000:00:04.0 Hardware Class: bridge Model: "AMD RS780/RS880 PCI to PCI bridge (PCIE port 0)" Vendor: pci 0x1022 "AMD" Device: pci 0x9604 "RS780/RS880 PCI to PCI bridge (PCIE port 0)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8388 Driver: "pcieport" IRQ: 25 (no events) Module Alias: "pci:v00001022d00009604sv00001043sd00008388bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 14.3: 0601 ISA bridge [Created at pci.386] Unique ID: yX7n.izfWtCFZk16 SysFS ID: /devices/pci0000:00/0000:00:14.3 SysFS BusID: 0000:00:14.3 Hardware Class: bridge Model: "ATI SB7x0/SB8x0/SB9x0 LPC host controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x439d "SB7x0/SB8x0/SB9x0 LPC host controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Module Alias: "pci:v00001002d0000439Dsv00001043sd00008389bc06sc01i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: VCu0.0uYtJ2d1MZD Parent ID: _Znp.+eZipJdga28 SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "nVidia GK208B [GeForce GT 730]" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x1287 "GK208B [GeForce GT 730]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8501 Revision: 0xa1 Driver: "nouveau" Driver Modules: "nouveau" Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable) Memory Range: 0xf0000000-0xf7ffffff (ro,non-prefetchable) Memory Range: 0xf8000000-0xf9ffffff (ro,non-prefetchable) I/O Ports: 0xdc00-0xdc7f (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 27 (177760 events) Module Alias: "pci:v000010DEd00001287sv00001043sd00008501bc03sc00i00" Driver Info #0: Driver Status: nvidiafb is not active Driver Activation Cmd: "modprobe nvidiafb" Driver Info #1: Driver Status: nouveau is active Driver Activation Cmd: "modprobe nouveau" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (PCI bridge) 19: PCI 14.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: Eu86.G2ybYGkeYC3 SysFS ID: /devices/pci0000:00/0000:00:14.1 SysFS BusID: 0000:00:14.1 Hardware Class: storage Model: "ATI SB7x0/SB8x0/SB9x0 IDE Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x439c "SB7x0/SB8x0/SB9x0 IDE Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Driver: "pata_atiixp" Driver Modules: "pata_atiixp" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xff00-0xff0f (rw) IRQ: 16 (1460 events) Module Alias: "pci:v00001002d0000439Csv00001043sd00008389bc01sc01i8A" Driver Info #0: Driver Status: pata_atiixp is active Driver Activation Cmd: "modprobe pata_atiixp" Driver Info #1: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 12.2: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: x_X+.jPsMPYxld01 SysFS ID: /devices/pci0000:00/0000:00:12.2 SysFS BusID: 0000:00:12.2 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4396 "SB7x0/SB8x0/SB9x0 USB EHCI Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Driver: "ehci-pci" Memory Range: 0xfcfff800-0xfcfff8ff (rw,non-prefetchable) IRQ: 17 (21402 events) Module Alias: "pci:v00001002d00004396sv00001043sd00008389bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.OZzcKVFLBQA SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "AMD RS780 Host Bridge" Vendor: pci 0x1022 "AMD" Device: pci 0x9600 "RS780 Host Bridge" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8388 Module Alias: "pci:v00001022d00009600sv00001043sd00008388bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 18.4: 0600 Host bridge [Created at pci.386] Unique ID: 60BX.Ww2F_h1WA4B SysFS ID: /devices/pci0000:00/0000:00:18.4 SysFS BusID: 0000:00:18.4 Hardware Class: bridge Model: "AMD Family 10h Processor Link Control" Vendor: pci 0x1022 "AMD" Device: pci 0x1204 "Family 10h Processor Link Control" Module Alias: "pci:v00001022d00001204sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 12.0: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: CLZK._p+0lYXXXq9 SysFS ID: /devices/pci0000:00/0000:00:12.0 SysFS BusID: 0000:00:12.0 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4397 "SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Driver: "ohci-pci" Memory Range: 0xfcffe000-0xfcffefff (rw,non-prefetchable) IRQ: 16 (1460 events) Module Alias: "pci:v00001002d00004397sv00001043sd00008389bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 18.2: 0600 Host bridge [Created at pci.386] Unique ID: OMCs.U5Al0Zo57JA SysFS ID: /devices/pci0000:00/0000:00:18.2 SysFS BusID: 0000:00:18.2 Hardware Class: bridge Model: "AMD Family 10h Processor DRAM Controller" Vendor: pci 0x1022 "AMD" Device: pci 0x1202 "Family 10h Processor DRAM Controller" Module Alias: "pci:v00001022d00001202sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 13.1: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: 9n5e.VEymD7fE3DA SysFS ID: /devices/pci0000:00/0000:00:13.1 SysFS BusID: 0000:00:13.1 Hardware Class: usb controller Model: "ATI SB7x0 USB OHCI1 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4398 "SB7x0 USB OHCI1 Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Driver: "ohci-pci" Memory Range: 0xfcffb000-0xfcffbfff (rw,non-prefetchable) IRQ: 18 (3 events) Module Alias: "pci:v00001002d00004398sv00001043sd00008389bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 18.0: 0600 Host bridge [Created at pci.386] Unique ID: fiDB.SGHF3QZh3Y9 SysFS ID: /devices/pci0000:00/0000:00:18.0 SysFS BusID: 0000:00:18.0 Hardware Class: bridge Model: "AMD Family 10h Processor HyperTransport Configuration" Vendor: pci 0x1022 "AMD" Device: pci 0x1200 "Family 10h Processor HyperTransport Configuration" Module Alias: "pci:v00001022d00001200sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 14.4: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: qscc.ULOo3yhA66C SysFS ID: /devices/pci0000:00/0000:00:14.4 SysFS BusID: 0000:00:14.4 Hardware Class: bridge Model: "ATI SBx00 PCI to PCI Bridge" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4384 "SBx00 PCI to PCI Bridge" Module Alias: "pci:v00001002d00004384sv00000000sd00000000bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: PCI 100.1: 0403 Audio device [Created at pci.386] Unique ID: NXNs.8l+_xzJuviC Parent ID: _Znp.+eZipJdga28 SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.1 SysFS BusID: 0000:01:00.1 Hardware Class: sound Model: "nVidia GK208 HDMI/DP Audio Controller" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0e0f "GK208 HDMI/DP Audio Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8501 Revision: 0xa1 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfebf8000-0xfebfbfff (rw,non-prefetchable) IRQ: 19 (10616 events) Module Alias: "pci:v000010DEd00000E0Fsv00001043sd00008501bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (PCI bridge) 29: PCI 14.2: 0403 Audio device [Created at pci.386] Unique ID: 5Dex.ttnamF32fgC SysFS ID: /devices/pci0000:00/0000:00:14.2 SysFS BusID: 0000:00:14.2 Hardware Class: sound Model: "ASUSTeK M5A78L LE" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4383 "SBx00 Azalia (Intel HDA)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8445 "M5A78L LE" Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfcff4000-0xfcff7fff (rw,non-prefetchable) IRQ: 16 (1460 events) Module Alias: "pci:v00001002d00004383sv00001043sd00008445bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 30: PCI 11.0: 0106 SATA controller (AHCI 1.0) [Created at pci.386] Unique ID: 7EWs.WPBK7Mqox0D SysFS ID: /devices/pci0000:00/0000:00:11.0 SysFS BusID: 0000:00:11.0 Hardware Class: storage Model: "ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4390 "SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 "M4A785TD Motherboard" Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xc000-0xc007 (rw) I/O Ports: 0xb000-0xb003 (rw) I/O Ports: 0xa000-0xa007 (rw) I/O Ports: 0x9000-0x9003 (rw) I/O Ports: 0x8000-0x800f (rw) Memory Range: 0xfcfffc00-0xfcffffff (rw,non-prefetchable) IRQ: 22 (73175 events) Module Alias: "pci:v00001002d00004390sv00001043sd00008389bc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 31: PCI 02.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: _Znp.+eZipJdga28 SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: bridge Model: "AMD RS780 PCI to PCI bridge (ext gfx port 0)" Vendor: pci 0x1022 "AMD" Device: pci 0x9603 "RS780 PCI to PCI bridge (ext gfx port 0)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8388 Driver: "pcieport" IRQ: 24 (no events) Module Alias: "pci:v00001022d00009603sv00001043sd00008388bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 32: PCI 14.0: 0c05 SMBus [Created at pci.386] Unique ID: MZfG.Q0RvM63dRR3 SysFS ID: /devices/pci0000:00/0000:00:14.0 SysFS BusID: 0000:00:14.0 Hardware Class: unknown Model: "ATI SBx00 SMBus Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4385 "SBx00 SMBus Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 "M4A785TD Motherboard" Revision: 0x3c Module Alias: "pci:v00001002d00004385sv00001043sd00008389bc0Csc05i00" Driver Info #0: Driver Status: i2c_piix4 is active Driver Activation Cmd: "modprobe i2c_piix4" Driver Info #1: Driver Status: sp5100_tco is not active Driver Activation Cmd: "modprobe sp5100_tco" Config Status: cfg=new, avail=yes, need=no, active=unknown 33: PCI 12.1: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: 4g2A.VEymD7fE3DA SysFS ID: /devices/pci0000:00/0000:00:12.1 SysFS BusID: 0000:00:12.1 Hardware Class: usb controller Model: "ATI SB7x0 USB OHCI1 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4398 "SB7x0 USB OHCI1 Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8389 Driver: "ohci-pci" Memory Range: 0xfcffd000-0xfcffdfff (rw,non-prefetchable) IRQ: 16 (1460 events) Module Alias: "pci:v00001002d00004398sv00001043sd00008389bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 35: SCSI 00.0: 10600 Disk [Created at block.255] Unique ID: 7bWa.XK5gicfJ+yC Parent ID: 06bT.jPsMPYxld01 SysFS ID: /class/block/sdd SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "WD Elements 107C" Vendor: usb 0x1058 "WD" Device: usb 0x107c "Elements 107C" Revision: "1065" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage" Device File: /dev/sdd (/dev/sg4) Device Files: /dev/sdd, /dev/disk/by-id/wwn-0x..., /dev/disk/by-id/ata-WDC_WD40EZRZ-00WN9B0_..., /dev/disk/by-path/pci-0000:00:13.2-usb-0:3:1.0-scsi-0:0:0:0 Device Number: block 8:48-8:63 (char 21:4) Speed: 480 Mbps Module Alias: "usb:v1058p107Cd1065dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (USB Controller) 36: IDE 601.0: 10600 Disk [Created at block.255] Unique ID: WZeP.XR6+8001PLC Parent ID: Eu86.G2ybYGkeYC3 SysFS ID: /class/block/sdb SysFS BusID: 6:0:1:0 SysFS Device Link: /devices/pci0000:00/0000:00:14.1/ata6/host6/target6:0:1/6:0:1:0 Hardware Class: disk Model: "SAMSUNG HD103SI" Vendor: "SAMSUNG" Device: "HD103SI" Revision: "1118" Driver: "pata_atiixp", "sd" Driver Modules: "pata_atiixp" Device File: /dev/sdb Device Files: /dev/sdb, /dev/disk/by-id/wwn-0x..., /dev/disk/by-path/pci-0000:00:14.1-ata-2.1, /dev/disk/by-path/pci-0000:00:14.1-ata-2, /dev/disk/by-id/ata-SAMSUNG_HD103SI_... Device Number: block 8:16-8:31 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (IDE interface) 37: SCSI 600.0: 10602 CD-ROM [Created at block.259] Unique ID: KD9E.qZCPfQiTHs2 Parent ID: Eu86.G2ybYGkeYC3 SysFS ID: /class/block/sr0 SysFS BusID: 6:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:14.1/ata6/host6/target6:0:0/6:0:0:0 Hardware Class: cdrom Model: "ASUS DRW-24F1ST a" Vendor: "ASUS" Device: "DRW-24F1ST a" Revision: "1.00" Driver: "pata_atiixp", "sr" Driver Modules: "pata_atiixp" Device File: /dev/sr0 (/dev/sg1) Device Files: /dev/sr0, /dev/disk/by-id/ata-ASUS_DRW-24F1ST_a_..., /dev/disk/by-path/pci-0000:00:14.1-ata-2.0, /dev/cdrom Device Number: block 11:0 (char 21:1) Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (IDE interface) Drive Speed: 94 38: IDE 200.0: 10600 Disk [Created at block.255] Unique ID: _kuT.SOszNY+ZJi9 Parent ID: 7EWs.WPBK7Mqox0D SysFS ID: /class/block/sdc SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:11.0/ata2/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "SanDisk SDSSDA24" Vendor: "SanDisk" Device: "SDSSDA24" Revision: "70RL" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sdc Device Files: /dev/sdc, /dev/disk/by-id/wwn-0x..., /dev/disk/by-id/ata-SanDisk_SDSSDA240G_..., /dev/disk/by-path/pci-0000:00:11.0-ata-2.0, /dev/disk/by-path/pci-0000:00:11.0-ata-2 Device Number: block 8:32-8:47 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #30 (SATA controller) 39: IDE 400.0: 10600 Disk [Created at block.255] Unique ID: 3OOL.jViafz1FWp4 Parent ID: Eu86.G2ybYGkeYC3 SysFS ID: /class/block/sda SysFS BusID: 4:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:14.1/ata5/host4/target4:0:0/4:0:0:0 Hardware Class: disk Model: "Maxtor 6L250R0" Vendor: "Maxtor" Device: "6L250R0" Revision: "1G20" Driver: "pata_atiixp", "sd" Driver Modules: "pata_atiixp" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-path/pci-0000:00:14.1-ata-1, /dev/disk/by-id/ata-Maxtor_6L250R0_..., /dev/disk/by-path/pci-0000:00:14.1-ata-1.0 Device Number: block 8:0-8:15 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (IDE interface) 40: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.PaupGMfzSp8 Parent ID: 9n5e.VEymD7fE3DA SysFS ID: /devices/pci0000:00/0000:00:13.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (USB Controller) 41: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: 33sj.OntrB+g9Q70 Parent ID: ADDn.oqcSvznpOi0 SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.4/1-1.4:1.0 SysFS BusID: 1-1.4:1.0 Hardware Class: keyboard Model: "Dell KB216 Wired Keyboard" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0x2113 "KB216 Wired Keyboard" Revision: "1.08" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event3 Device Files: /dev/input/event3, /dev/input/by-id/usb-413c_Dell_KB216_Wired_...-event-kbd, /dev/input/by-path/pci-0000:00:12.2-usb-0:1.4:1.0-event-kbd Device Number: char 13:67 Speed: 1.5 Mbps Module Alias: "usb:v413Cp2113d0108dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #51 (Hub) 42: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.7qWCOCfUJwE Parent ID: CLZK._p+0lYXXXq9 SysFS ID: /devices/pci0000:00/0000:00:12.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #23 (USB Controller) 43: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT._WUAGn1cSY8 Parent ID: hB6S.0fuWihmxabA SysFS ID: /devices/pci0000:00/0000:00:14.5/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (USB Controller) 44: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: lfzD.ZfkaNtHDWyC Parent ID: ADDn.oqcSvznpOi0 SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1:1.0 SysFS BusID: 1-1.1:1.0 Hardware Class: unknown Model: "Belkin F1DF102U/F1DG102U Flip KVM" Hotplug: USB Vendor: usb 0x050d "Belkin Components" Device: usb 0x3201 "F1DF102U/F1DG102U Flip KVM" Revision: "2.34" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event6 Device Files: /dev/input/event6, /dev/input/by-path/pci-0000:00:12.2-usb-0:1.1:1.0-event, /dev/input/by-id/usb-Belkin_Corporation_Flip_...-event-if00 Device Number: char 13:70 Speed: 1.5 Mbps Module Alias: "usb:v050Dp3201d0234dc00dsc00dp00ic03isc01ip00in00" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #51 (Hub) 45: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.uYbnlyRCGC6 Parent ID: 4g2A.VEymD7fE3DA SysFS ID: /devices/pci0000:00/0000:00:12.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #33 (USB Controller) 46: USB 00.1: 0000 Unclassified device [Created at usb.122] Unique ID: WE6o.7uy+YXUlKAA Parent ID: ADDn.oqcSvznpOi0 SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.4/1-1.4:1.1 SysFS BusID: 1-1.4:1.1 Hardware Class: unknown Model: "Dell KB216 Wired Keyboard" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0x2113 "KB216 Wired Keyboard" Revision: "1.08" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event5 Device Files: /dev/input/event5, /dev/input/by-id/usb-413c_Dell_KB216_Wired_...-event-if01, /dev/input/by-path/pci-0000:00:12.2-usb-0:1.4:1.1-event Device Number: char 13:69 Speed: 1.5 Mbps Module Alias: "usb:v413Cp2113d0108dc00dsc00dp00ic03isc00ip00in01" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #51 (Hub) 47: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.YdoZZg0c8i6 Parent ID: x_X+.jPsMPYxld01 SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 49: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.erpEvbsFWX1 Parent ID: HSco._p+0lYXXXq9 SysFS ID: /devices/pci0000:00/0000:00:13.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (USB Controller) 50: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: dwDZ.JbnhSVJpKR2 Parent ID: ADDn.oqcSvznpOi0 SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.3/1-1.3:1.0 SysFS BusID: 1-1.3:1.0 Hardware Class: mouse Model: "Dell MS116 Optical Mouse" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0x301a "Dell MS116 Optical Mouse" Revision: "1.00" Compatible to: int 0x0210 0x0023 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2, /dev/input/by-id/usb-PixArt_Dell_MS116_USB_Optical_...-event-mouse, /dev/input/by-path/pci-0000:00:12.2-usb-0:1.3:1.0-event-mouse, /dev/input/by-path/pci-0000:00:12.2-usb-0:1.3:1.0-mouse, /dev/input/by-id/usb-PixArt_Dell_MS116_USB_Optical_...-mouse Device Number: char 13:63 (char 13:32) Speed: 1.5 Mbps Module Alias: "usb:v413Cp301Ad0100dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: Buttons: 3 Wheels: 2 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #51 (Hub) 51: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: ADDn.oqcSvznpOi0 Parent ID: k4bc.YdoZZg0c8i6 SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0 SysFS BusID: 1-1:1.0 Hardware Class: hub Model: "Microchip Technology, Inc. (formerly SMSC) USB MultiSwitch Hub" Hotplug: USB Vendor: usb 0x0424 "Microchip Technology, Inc. (formerly SMSC)" Device: usb 0x2524 "USB MultiSwitch Hub" Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v0424p2524d0000dc09dsc00dp02ic09isc00ip02in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #47 (Hub) 52: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.3f5c44ENLJ9 Parent ID: 06bT.jPsMPYxld01 SysFS ID: /devices/pci0000:00/0000:00:13.2/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0515dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (USB Controller) 53: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 16.6.2 "AMD Athlon(tm) II X2 235e Processor" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,cpuid,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,nodeid_msr,hw_pstate,vmmcall,npt,lbrv,svm_lock,nrip_save Clock: 2700 MHz BogoMips: 5424.75 Cache: 1024 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 54: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 16.6.2 "AMD Athlon(tm) II X2 235e Processor" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,pdpe1gb,rdtscp,lm,3dnowext,3dnow,constant_tsc,rep_good,nopl,nonstop_tsc,cpuid,extd_apicid,pni,monitor,cx16,popcnt,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,abm,sse4a,misalignsse,3dnowprefetch,osvw,ibs,skinit,wdt,nodeid_msr,hw_pstate,vmmcall,npt,lbrv,svm_lock,nrip_save Clock: 2700 MHz BogoMips: 5424.75 Cache: 1024 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 55: Serial 00.0: 10801 Console [Created at kbd.178] Unique ID: ReDs.5lXXuQkv_C5 Hardware Class: keyboard Model: "serial console" Device: "serial console" Device File: /dev/tty2 Config Status: cfg=new, avail=yes, need=no, active=unknown 56: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 57: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: Ij4C.ndpeucax6V1 Parent ID: c3qJ.2dzJn7ktuZF SysFS ID: /class/net/enp2s0 SysFS Device Link: /devices/pci0000:00/0000:00:04.0/0000:02:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "r8169" Driver Modules: "r8169" Device File: enp2s0 HW Address: C4C1821CB515E576E500E7082FAE1EE8 Permanent HW Address: C4C1821CB515E576E500E7082FAE1EE8 Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (Ethernet controller)