Probe #241a9d1cad of ASUSTek P5KPL-AM Desktop Computer

Log: hwinfo

12: PCI 1f.2: 0101 IDE interface [Created at pci.378] Unique ID: w7Y8.mjeFuN+yoV8 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel NM10/ICH7 Family SATA Controller [IDE mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c0 "NM10/ICH7 Family SATA Controller [IDE mode]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5KPL-VM Motherboard" Revision: 0x01 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0xd080-0xd087 (rw) I/O Ports: 0xd000-0xd003 (rw) I/O Ports: 0xcc00-0xcc07 (rw) I/O Ports: 0xc880-0xc883 (rw) I/O Ports: 0xc800-0xc80f (rw) IRQ: 23 (25685 events) Module Alias: "pci:v00008086d000027C0sv00001043sd00008179bc01sc01i8F" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.378] Unique ID: z8Q3.PZ1iPLkcHs2 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d0 "NM10/ICH7 Family PCI Express Port 1" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 Revision: 0x01 Driver: "pcieport" IRQ: 16 (1309 events) Module Alias: "pci:v00008086d000027D0sv00001043sd00008179bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1d.3: 0c03 USB Controller (UHCI) [Created at pci.378] Unique ID: eEx1.PBCkKs+Wb_2 SysFS ID: /devices/pci0000:00/0000:00:1d.3 SysFS BusID: 0000:00:1d.3 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cb "NM10/ICH7 Family USB UHCI Controller #4" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5KPL-VM,P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xd880-0xd89f (rw) IRQ: 16 (1309 events) Module Alias: "pci:v00008086d000027CBsv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1f.0: 0601 ISA bridge [Created at pci.378] Unique ID: BUZT.U_2bbqNXXI4 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801GB/GR (ICH7 Family) LPC Interface Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27b8 "82801GB/GR (ICH7 Family) LPC Interface Bridge" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5KPL-VM Motherboard" Revision: 0x01 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d000027B8sv00001043sd00008179bc06sc01i00" Driver Info #0: Driver Status: intel_rng is not active Driver Activation Cmd: "modprobe intel_rng" Driver Info #1: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Driver Info #2: Driver Status: leds_ss4200 is not active Driver Activation Cmd: "modprobe leds_ss4200" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.378] Unique ID: vayM.NMJENjm6YD2 SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c9 "NM10/ICH7 Family USB UHCI Controller #2" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5KPL-VM,P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xd480-0xd49f (rw) IRQ: 19 (43 events) Module Alias: "pci:v00008086d000027C9sv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 100.0: 0200 Ethernet controller [Created at pci.378] Unique ID: lkKU.ONmJyMiLV40 Parent ID: qTvu.ROwBNUz0Ld3 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: network Model: "Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller" Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." Device: pci 0x8136 "RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8347 Revision: 0x02 Driver: "r8169" Driver Modules: "r8169" Device File: enp1s0 I/O Ports: 0xe800-0xe8ff (rw) Memory Range: 0xfdfff000-0xfdffffff (ro,non-prefetchable) Memory Range: 0xfdfe0000-0xfdfeffff (ro,non-prefetchable) Memory Range: 0xfebf0000-0xfebfffff (ro,non-prefetchable,disabled) IRQ: 17 (706 events) HW Address: ... Permanent HW Address: ... Link detected: yes Module Alias: "pci:v000010ECd00008136sv00001043sd00008347bc02sc00i00" Driver Info #0: Driver Status: r8169 is active Driver Activation Cmd: "modprobe r8169" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (PCI bridge) 18: PCI 1b.0: 0403 Audio device [Created at pci.378] Unique ID: u1Nb.2WmpMbu6VC2 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel NM10/ICH7 Family High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "NM10/ICH7 Family High Definition Audio Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x83eb Revision: 0x01 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfea78000-0xfea7bfff (rw,non-prefetchable) IRQ: 24 (540 events) Module Alias: "pci:v00008086d000027D8sv00001043sd000083EBbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.378] Unique ID: 6NW+.zXRvsg0ka5E SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244e "82801 PCI Bridge" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 Revision: 0xe1 Module Alias: "pci:v00008086d0000244Esv00001043sd00008179bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1f.3: 0c05 SMBus [Created at pci.378] Unique ID: nS1_.AqEO3v7RvY5 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel NM10/ICH7 Family SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27da "NM10/ICH7 Family SMBus Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5KPL-VM Motherboard" Revision: 0x01 Driver: "i801_smbus" Driver Modules: "i2c_i801" I/O Ports: 0x400-0x41f (rw) IRQ: 23 (25685 events) Module Alias: "pci:v00008086d000027DAsv00001043sd00008179bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 00.0: 0600 Host bridge [Created at pci.378] Unique ID: qLht.6L0dv+nPzM3 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel 82G33/G31/P35/P31 Express DRAM Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29c0 "82G33/G31/P35/P31 Express DRAM Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82b0 "P5KPL-VM Motherboard" Revision: 0x10 Module Alias: "pci:v00008086d000029C0sv00001043sd000082B0bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.378] Unique ID: qTvu.ROwBNUz0Ld3 SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel NM10/ICH7 Family PCI Express Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d2 "NM10/ICH7 Family PCI Express Port 2" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 Revision: 0x01 Driver: "pcieport" IRQ: 17 (706 events) Module Alias: "pci:v00008086d000027D2sv00001043sd00008179bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 1f.1: 0101 IDE interface [Created at pci.378] Unique ID: 3p2J.gd5eUdx1QNF SysFS ID: /devices/pci0000:00/0000:00:1f.1 SysFS BusID: 0000:00:1f.1 Hardware Class: storage Model: "Intel 82801G (ICH7 Family) IDE Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27df "82801G (ICH7 Family) IDE Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5KPL-VM Motherboard" Revision: 0x01 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xffa0-0xffaf (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d000027DFsv00001043sd00008179bc01sc01i8A" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.378] Unique ID: mvRC.umF_rHup3c2 SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27ca "NM10/ICH7 Family USB UHCI Controller #3" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5KPL-VM,P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xd800-0xd81f (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d000027CAsv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.378] Unique ID: 1GTX.sxMUu8fP0r1 SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27c8 "NM10/ICH7 Family USB UHCI Controller #1" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5KPL-VM,P5LD2-VM Mainboard" Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xd400-0xd41f (rw) IRQ: 23 (25685 events) Module Alias: "pci:v00008086d000027C8sv00001043sd00008179bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.378] Unique ID: _Znp.5jENKKL4iYF SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel G33" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29c2 "G33" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82b0 "P5KPL-VM Motherboard" Revision: 0x10 Driver: "i915" Driver Modules: "i915" Memory Range: 0xfea80000-0xfeafffff (rw,non-prefetchable) I/O Ports: 0xdc00-0xdc07 (rw) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) Memory Range: 0xfe900000-0xfe9fffff (rw,non-prefetchable) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (1309 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d000029C2sv00001043sd000082B0bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: intel Driver Info #1: XFree86 v4 Server Module: intel 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.378] Unique ID: 5YuN.Qckf5Vc_eC8 SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel NM10/ICH7 Family USB2 EHCI Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27cc "NM10/ICH7 Family USB2 EHCI Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8179 "P5KPL-VM,P5LD2-VM Mainboard" Revision: 0x01 Driver: "ehci-pci" Memory Range: 0xfea77c00-0xfea77fff (rw,non-prefetchable) IRQ: 23 (25685 events) Module Alias: "pci:v00008086d000027CCsv00001043sd00008179bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: None 00.0: 10000 Monitor [Created at monitor.125] Unique ID: rdCR.GJAIIXqkiZ9 Parent ID: _Znp.5jENKKL4iYF Hardware Class: monitor Model: "BenQ E2000W" Vendor: BNQ Device: eisa 0x7907 "BenQ E2000W" Serial ID: -- Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@75Hz Resolution: 800x600@60Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@75Hz Resolution: 1280x1024@75Hz Resolution: 1680x1050@60Hz Size: 433x271 mm Year of Manufacture: 2007 Week of Manufacture: 38 Detailed Timings #0: Resolution: 1680x1050 Horizontal: 1680 1784 1960 2240 (+104 +280 +560) +hsync Vertical: 1050 1053 1059 1089 (+3 +9 +39) -vsync Frequencies: 146.25 MHz, 65.29 kHz, 59.95 Hz Driver Info #0: Max. Resolution: 1680x1050 Vert. Sync Range: 55-76 Hz Hor. Sync Range: 31-83 kHz Bandwidth: 146 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (VGA compatible controller) 30: IDE 201.0: 10600 Disk [Created at block.245] Unique ID: WZeP.TL78rytkcX2 Parent ID: w7Y8.mjeFuN+yoV8 SysFS ID: /class/block/sdb SysFS BusID: 2:0:1:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:1/2:0:1:0 Hardware Class: disk Model: "ST250DM000-1BD14" Device: "ST250DM000-1BD14" Revision: "KC45" Serial ID: -- Driver: "ata_piix", "sd" Driver Modules: "ata_piix" Device File: /dev/sdb Device Files: /dev/sdb, /dev/disk/by-id/ata-ST250DM000-1BD141_..., /dev/disk/by-id/wwn-0x..., /dev/disk/by-path/pci-0000:00:1f.2-ata-1 Device Number: block 8:16-8:31 Geometry (Logical): CHS 30401/255/63 Size: 488397168 sectors a 512 bytes Capacity: 232 GB (250059350016 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (IDE interface) 31: None 00.0: 10600 Disk [Created at block.245] Unique ID: kwWm.Fxp0d3BezAE SysFS ID: /class/block/fd0 SysFS BusID: floppy.0 SysFS Device Link: /devices/platform/floppy.0 Hardware Class: disk Model: "Disk" Driver: "floppy" Driver Modules: "floppy" Device File: /dev/fd0 Device Number: block 2:0 Size: 8 sectors a 512 bytes Capacity: 0 GB (4096 bytes) Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown 32: IDE 300.0: 10600 Disk [Created at block.245] Unique ID: _kuT.C06LS5S7u7A Parent ID: w7Y8.mjeFuN+yoV8 SysFS ID: /class/block/sdc SysFS BusID: 3:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata4/host3/target3:0:0/3:0:0:0 Hardware Class: disk Model: "WDC WD2500JS-00N" Vendor: "WDC" Device: "WD2500JS-00N" Revision: "2E02" Serial ID: -- Driver: "ata_piix", "sd" Driver Modules: "ata_piix" Device File: /dev/sdc Device Files: /dev/sdc, /dev/disk/by-id/ata-WDC_WD2500JS-00NCB1_..., /dev/disk/by-path/pci-0000:00:1f.2-ata-2 Device Number: block 8:32-8:47 Geometry (Logical): CHS 30401/255/63 Size: 488397168 sectors a 512 bytes Capacity: 232 GB (250059350016 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (IDE interface) 33: IDE 200.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.QppvQymktD8 Parent ID: w7Y8.mjeFuN+yoV8 SysFS ID: /class/block/sda SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "WDC WD2000JS-60N" Vendor: "WDC" Device: "WD2000JS-60N" Revision: "2E02" Serial ID: -- Driver: "ata_piix", "sd" Driver Modules: "ata_piix" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/ata-WDC_WD2000JS-60NCB1_..., /dev/disk/by-path/pci-0000:00:1f.2-ata-1 Device Number: block 8:0-8:15 Geometry (Logical): CHS 24321/255/63 Size: 390721968 sectors a 512 bytes Capacity: 186 GB (200049647616 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (IDE interface) 34: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.gkSaZmjGyhD Parent ID: vayM.NMJENjm6YD2 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (USB Controller) 35: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: KRJj.rMWBfAtsG_0 Parent ID: uIhY.gkSaZmjGyhD SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0 SysFS BusID: 3-1:1.0 Hardware Class: mouse Model: "Maxxter Wireless Receiver" Hotplug: USB Vendor: usb 0x248a "Maxxter" Device: usb 0x8514 "Wireless Receiver" Revision: "1.00" Compatible to: int 0x0210 0x0025 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event3, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse Device Number: char 13:63 (char 13:32) Speed: 12 Mbps Module Alias: "usb:v248Ap8514d0100dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: Buttons: 5 Wheels: 2 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #34 (Hub) 36: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.RTX9xWW_uz4 Parent ID: mvRC.umF_rHup3c2 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (USB Controller) 37: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.9T1GDCLyFd9 Parent ID: 5YuN.Qckf5Vc_eC8 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (USB Controller) 38: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.CCckIHJirFC Parent ID: eEx1.PBCkKs+Wb_2 SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (USB Controller) 39: USB 00.1: 10800 Keyboard [Created at usb.122] Unique ID: ncZn.6e0Y7yQmQu1 Parent ID: uIhY.gkSaZmjGyhD SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1 SysFS BusID: 3-1:1.1 Hardware Class: keyboard Model: "Maxxter Wireless Receiver" Hotplug: USB Vendor: usb 0x248a "Maxxter" Device: usb 0x8514 "Wireless Receiver" Revision: "1.00" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event4 Device Files: /dev/input/event4, /dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.1-event-kbd, /dev/input/by-id/usb-Telink_Wireless_...-if01-event-kbd Device Number: char 13:68 Speed: 12 Mbps Module Alias: "usb:v248Ap8514d0100dc00dsc00dp00ic03isc01ip01in01" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #34 (Hub) 40: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.v+N+B0xY+P6 Parent ID: 1GTX.sxMUu8fP0r1 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (USB Controller) 41: PS/2 00.0: 10800 Keyboard [Created at input.226] Unique ID: hiS5.+49ps10DtUF Hardware Class: keyboard Model: "AT Translated Set 2 keyboard" Vendor: 0x0001 Device: 0x0001 "AT Translated Set 2 keyboard" Compatible to: int 0x0211 0x0001 Device File: /dev/input/event2 Device Files: /dev/input/event2, /dev/input/by-path/platform-i8042-serio-0-event-kbd Device Number: char 13:66 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 42: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.bGO0sOimOM3 Hardware Class: mouse Model: "ImExPS/2 Generic Explorer Mouse" Vendor: 0x0002 Device: 0x0006 "ImExPS/2 Generic Explorer Mouse" Compatible to: int 0x0210 0x0025 Device File: /dev/input/mice (/dev/input/mouse1) Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event13, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse Device Number: char 13:63 (char 13:33) Driver Info #0: Buttons: 5 Wheels: 2 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 43: None 00.0: 10103 CPU [Created at cpu.457] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.11 "Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,tpr_shadow,vnmi,flexpriority,dtherm Clock: 1997 MHz BogoMips: 5329.41 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 44: None 01.0: 10103 CPU [Created at cpu.457] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.11 "Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,tpr_shadow,vnmi,flexpriority,dtherm Clock: 1997 MHz BogoMips: 5329.41 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 45: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: QObM.ndpeucax6V1 Parent ID: lkKU.ONmJyMiLV40 SysFS ID: /class/net/enp1s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:01:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "r8169" Driver Modules: "r8169" Device File: enp1s0 HW Address: ... Permanent HW Address: ... Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (Ethernet controller) 46: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown


Hardware for Linux and BSD

GitHub