Probe #3824b91be9 of Dell Latitude D830

Log: hwinfo

11: PCI c00.0: 0282 WLAN controller [Created at pci.386] Unique ID: y9sn.ewgitxEFqvB Parent ID: qTvu._JPuTI1fJI1 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 SysFS BusID: 0000:0c:00.0 Hardware Class: network Model: "Dell Wireless 1500 Draft 802.11n WLAN Mini-card" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4328 "BCM4321 802.11a/b/g/n" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x000a "Wireless 1500 Draft 802.11n WLAN Mini-card" Revision: 0x03 Driver: "wl" Driver Modules: "wl" Device File: wlan0 Features: WLAN Memory Range: 0xf6cfc000-0xf6cfffff (rw,non-prefetchable) Memory Range: 0xf0000000-0xf00fffff (ro,non-prefetchable) IRQ: 17 (18525 events) HW Address: ... Permanent HW Address: ... Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 96 98 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 5.16 5.17 5.18 5.19 5.2 5.21 5.22 5.23 5.24 5.25 5.26 5.27 5.28 5.29 5.3 5.31 5.32 5.33 5.34 5.48 5.49 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v000014E4d00004328sv00001028sd0000000Abc02sc80i00" Driver Info #0: Driver Status: ssb is not active Driver Activation Cmd: "modprobe ssb" Driver Info #1: Driver Status: wl is active Driver Activation Cmd: "modprobe wl" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) 12: PCI 1f.2: 0106 SATA controller (AHCI 1.0) [Created at pci.386] Unique ID: w7Y8.aZDK9LozciE SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2829 "82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0x6eb0-0x6eb7 (rw) I/O Ports: 0x6eb8-0x6ebb (rw) I/O Ports: 0x6ec0-0x6ec7 (rw) I/O Ports: 0x6ec8-0x6ecb (rw) I/O Ports: 0x6ee0-0x6eff (rw) Memory Range: 0xf6dfb800-0xf6dfbfff (rw,non-prefetchable) IRQ: 24 (93063 events) Module Alias: "pci:v00008086d00002829sv00001028sd000001FEbc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.yUWOW9oEGX0 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283f "82801H (ICH8 Family) PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 16 (105719 events) Module Alias: "pci:v00008086d0000283Fsv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1a.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: gFpy.N2zg1u7Px90 SysFS ID: /devices/pci0000:00/0000:00:1a.1 SysFS BusID: 0000:00:1a.1 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #5" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2835 "82801H (ICH8 Family) USB UHCI Controller #5" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f00-0x6f1f (rw) IRQ: 21 (no events) Module Alias: "pci:v00008086d00002835sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.lSYo2Wd01wD SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801HM (ICH8M) LPC Interface Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2815 "82801HM (ICH8M) LPC Interface Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d00002815sv00001028sd000001FEbc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.JOBh6cfaqdE SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2831 "82801H (ICH8 Family) USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f60-0x6f7f (rw) IRQ: 21 (no events) Module Alias: "pci:v00008086d00002831sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 1c.5: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: HnsE.6eytJszHXM4 SysFS ID: /devices/pci0000:00/0000:00:1c.5 SysFS BusID: 0000:00:1c.5 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 6" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2849 "82801H (ICH8 Family) PCI Express Port 6" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 17 (18525 events) Module Alias: "pci:v00008086d00002849sv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 02.1: 0380 Display controller [Created at pci.386] Unique ID: ruGf.LLg5m4wQl46 SysFS ID: /devices/pci0000:00/0000:00:02.1 SysFS BusID: 0000:00:02.1 Hardware Class: graphics card Model: "Intel Mobile GM965/GL960 Integrated Graphics Controller (secondary)" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a03 "Mobile GM965/GL960 Integrated Graphics Controller (secondary)" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x0c Memory Range: 0xf6f00000-0xf6ffffff (rw,non-prefetchable) Module Alias: "pci:v00008086d00002A03sv00001028sd000001FEbc03sc80i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.bHIrUAw8+c5 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801H (ICH8 Family) HD Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x284b "82801H (ICH8 Family) HD Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xf6dfc000-0xf6dfffff (rw,non-prefetchable) IRQ: 25 (504 events) Module Alias: "pci:v00008086d0000284Bsv00001028sd000001FEbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1c.3: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: Z7uZ.2_AuOaVTQq2 SysFS ID: /devices/pci0000:00/0000:00:1c.3 SysFS BusID: 0000:00:1c.3 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2845 "82801H (ICH8 Family) PCI Express Port 4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 19 (no events) Module Alias: "pci:v00008086d00002845sv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.ooYp8sqaqb5 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 Mobile PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2448 "82801 Mobile PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0xf2 Module Alias: "pci:v00008086d00002448sv00001028sd000001FEbc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.2CLrtVY45R0 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel 82801H (ICH8 Family) SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283e "82801H (ICH8 Family) SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "i801_smbus" Driver Modules: "i2c_i801" Memory Range: 0xf6dfb700-0xf6dfb7ff (rw,non-prefetchable) I/O Ports: 0x10c0-0x10df (rw) IRQ: 17 (18525 events) Module Alias: "pci:v00008086d0000283Esv00001028sd000001FEbc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.rW4jRw36lH4 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel Mobile PM965/GM965/GL960 Memory Controller Hub" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a00 "Mobile PM965/GM965/GL960 Memory Controller Hub" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x0c Module Alias: "pci:v00008086d00002A00sv00001028sd000001FEbc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: qTvu._JPuTI1fJI1 SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2841 "82801H (ICH8 Family) PCI Express Port 2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 17 (18525 events) Module Alias: "pci:v00008086d00002841sv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 1f.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: 3p2J.FOTqYeurREF SysFS ID: /devices/pci0000:00/0000:00:1f.1 SysFS BusID: 0000:00:1f.1 Hardware Class: storage Model: "Intel 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2850 "82801HM/HEM (ICH8M/ICH8M-E) IDE Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0x6fa0-0x6faf (rw) IRQ: 16 (105719 events) Module Alias: "pci:v00008086d00002850sv00001028sd000001FEbc01sc01i8A" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.qo7RbAnHM0F SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2832 "82801H (ICH8 Family) USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f40-0x6f5f (rw) IRQ: 22 (101 events) Module Alias: "pci:v00008086d00002832sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 1a.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: pwJ7.sd0xYJ0iPnF SysFS ID: /devices/pci0000:00/0000:00:1a.0 SysFS BusID: 0000:00:1a.0 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2834 "82801H (ICH8 Family) USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f20-0x6f3f (rw) IRQ: 20 (77169 events) Module Alias: "pci:v00008086d00002834sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.ozExd1YtIFE SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2830 "82801H (ICH8 Family) USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f80-0x6f9f (rw) IRQ: 20 (77169 events) Module Alias: "pci:v00008086d00002830sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 29: PCI 1a.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: sClz.S7HcjkYv5V5 SysFS ID: /devices/pci0000:00/0000:00:1a.7 SysFS BusID: 0000:00:1a.7 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB2 EHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283a "82801H (ICH8 Family) USB2 EHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xfed1c400-0xfed1c7ff (rw,non-prefetchable) IRQ: 22 (101 events) Module Alias: "pci:v00008086d0000283Asv00001028sd000001FEbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 30: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: _Znp.quITsEdmTT0 SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel 965 GM" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a02 "965 GM" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x0c Driver: "i915" Driver Modules: "i915" Memory Range: 0xf6e00000-0xf6efffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0xeff8-0xefff (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (105719 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d00002A02sv00001028sd000001FEbc03sc00i00" Driver Info #0: XFree86 v4 Server Module: intel Driver Info #1: XFree86 v4 Server Module: intel 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown 31: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.OTVcoWks_N5 SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB2 EHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2836 "82801H (ICH8 Family) USB2 EHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xfed1c000-0xfed1c3ff (rw,non-prefetchable) IRQ: 20 (77169 events) Module Alias: "pci:v00008086d00002836sv00001028sd000001FEbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 32: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.PMS_nysox92 Parent ID: _Znp.quITsEdmTT0 Hardware Class: monitor Model: "NK058 154P3 LCD Monitor" Vendor: SEC "NK058 154P3" Device: eisa 0x3350 Resolution: 1680x1050@60Hz Size: 331x207 mm Year of Manufacture: 2007 Week of Manufacture: 0 Detailed Timings #0: Resolution: 1680x1050 Horizontal: 1680 1728 1760 2000 (+48 +80 +320) -hsync Vertical: 1050 1053 1059 1100 (+3 +9 +50) -vsync Frequencies: 132.00 MHz, 66.00 kHz, 60.00 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #30 (VGA compatible controller) 33: IDE 200.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.1yynJFmcuh2 Parent ID: w7Y8.aZDK9LozciE SysFS ID: /class/block/sda SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "Samsung SSD 870" Vendor: "Samsung" Device: "SSD 870" Revision: "1B6Q" Serial ID: -- Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/ata-Samsung_SSD_870_EVO_250GB_..., /dev/disk/by-id/wwn-0x..., /dev/disk/by-path/pci-0000:00:1f.2-ata-1, /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0 Device Number: block 8:0-8:15 BIOS id: 0x80 Geometry (Logical): CHS 30401/255/63 Size: 488397168 sectors a 512 bytes Capacity: 232 GB (250059350016 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (SATA controller) 34: USB 00.0: 10900 Printer [Created at usb.122] Unique ID: Zj8l.ucLrglANtS6 Parent ID: pBe4.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0 SysFS BusID: 2-4:1.0 Hardware Class: printer Model: "Xerox Phaser 6500DN" Hotplug: USB Vendor: usb 0x0924 "Xerox" Device: usb 0x3d6a "Phaser 6500DN" Revision: "1.00" Serial ID: -- Driver: "usblp" Driver Modules: "usblp" Speed: 480 Mbps Module Alias: "usb:v0924p3D6Ad0100dc00dsc00dp00ic07isc01ip02in00" Driver Info #0: Driver Status: usblp is active Driver Activation Cmd: "modprobe usblp" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #48 (Hub) 35: USB 00.0: 10e00 Chipcard Reader [Created at usb.122] Unique ID: WOTD.Oqk5p9nndT1 Parent ID: datd.ZrTiaNBpvAA SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.2/7-1.2:1.0 SysFS BusID: 7-1.2:1.0 Hardware Class: chipcard Model: "O2 Micro OZ776 CCID Smartcard Reader" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7772 "OZ776 CCID Smartcard Reader" Revision: "1.10" Speed: 12 Mbps Module Alias: "usb:v0B97p7772d0110dc00dsc00dp00ic0Bisc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #42 (Hub) 36: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.gkSaZmjGyhD Parent ID: vayM.JOBh6cfaqdE SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (USB Controller) 37: USB 00.1: 11500 Bluetooth Device [Created at usb.122] Unique ID: DlBy.Ih8Guy4gXY8 Parent ID: uIhY.MxUuepIFPaE SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1 SysFS BusID: 3-2:1.1 Hardware Class: bluetooth Model: "Dell Wireless 360 Bluetooth" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0x8140 "Wireless 360 Bluetooth" Revision: "43.15" Driver: "btusb" Driver Modules: "btusb" Speed: 12 Mbps Module Alias: "usb:v413Cp8140d4315dcE0dsc01dp01icE0isc01ip01in01" Driver Info #0: Driver Status: btusb is active Driver Activation Cmd: "modprobe btusb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #39 (Hub) 38: USB 00.0: 0282 WLAN controller [Created at usb.122] Unique ID: FKGF.8eqq3YEAjZB Parent ID: pBe4.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0 SysFS BusID: 2-1:1.0 Hardware Class: network Model: "NetGear WN111(v2) RangeMax Next Wireless [Atheros AR9170+AR9101]" Hotplug: USB Vendor: usb 0x0846 "NetGear, Inc." Device: usb 0x9001 "WN111(v2) RangeMax Next Wireless [Atheros AR9170+AR9101]" Revision: "1.06" Serial ID: -- Driver: "carl9170" Driver Modules: "carl9170" Device File: wlan1 Features: WLAN Speed: 480 Mbps HW Address: ... Permanent HW Address: ... Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "usb:v0846p9001d0106dcFFdscFFdpFFicFFisc00ip00in00" Driver Info #0: Driver Status: carl9170 is active Driver Activation Cmd: "modprobe carl9170" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #48 (Hub) 39: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.MxUuepIFPaE Parent ID: pwJ7.sd0xYJ0iPnF SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (USB Controller) 40: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT.RTX9xWW_uz4 Parent ID: mvRC.qo7RbAnHM0F SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (USB Controller) 41: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.7gZT0a5zLs5 Parent ID: gFpy.N2zg1u7Px90 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (USB Controller) 42: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: datd.ZrTiaNBpvAA Parent ID: BSFT.RTX9xWW_uz4 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0 SysFS BusID: 7-1:1.0 Hardware Class: hub Model: "O2 Micro Oz776 1.1 Hub" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7761 "Oz776 1.1 Hub" Revision: "1.10" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v0B97p7761d0110dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #40 (Hub) 44: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.cO89g+iefn1 Parent ID: sClz.S7HcjkYv5V5 SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #29 (USB Controller) 46: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.v+N+B0xY+P6 Parent ID: 1GTX.ozExd1YtIFE SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #28 (USB Controller) 47: USB 00.0: 11600 Fingerprint Reader [Created at usb.122] Unique ID: 2jVo.2ZOIHS5Eja7 Parent ID: BSFT.RTX9xWW_uz4 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0 SysFS BusID: 7-2:1.0 Model: "STMicroelectronics Fingerprint Reader" Hotplug: USB Vendor: usb 0x0483 "STMicroelectronics" Device: usb 0x2016 "Fingerprint Reader" Revision: "0.01" Speed: 12 Mbps Module Alias: "usb:v0483p2016d0001dc00dsc00dp00icFFisc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #40 (Hub) 48: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.9T1GDCLyFd9 Parent ID: 5YuN.OTVcoWks_N5 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (USB Controller) 49: PS/2 00.0: 10800 Keyboard [Created at input.226] Unique ID: 9ui9.+49ps10DtUF Hardware Class: keyboard Model: "AT Translated Set 2 keyboard" Vendor: 0x0001 Device: 0x0001 "AT Translated Set 2 keyboard" Compatible to: int 0x0211 0x0001 Device File: /dev/input/event3 Device Files: /dev/input/event3, /dev/input/by-path/platform-i8042-serio-0-event-kbd Device Number: char 13:67 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 50: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.5+smWHVjPI3 Hardware Class: mouse Model: "AlpsPS/2 ALPS DualPoint Stick" Vendor: 0x0002 Device: 0x0008 "AlpsPS/2 ALPS DualPoint Stick" Compatible to: int 0x0210 0x0003 Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event5, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse Device Number: char 13:63 (char 13:32) Driver Info #0: Buttons: 3 Wheels: 0 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 51: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.5+smWHVjPI3 Hardware Class: mouse Model: "AlpsPS/2 ALPS DualPoint TouchPad" Vendor: 0x0002 Device: 0x0008 "AlpsPS/2 ALPS DualPoint TouchPad" Compatible to: int 0x0210 0x0003 Device File: /dev/input/mice (/dev/input/mouse1) Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event6 Device Number: char 13:63 (char 13:33) Driver Info #0: Buttons: 3 Wheels: 0 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 52: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.7S9IdaGZ_i0 Hardware Class: mouse Model: "Dell BT Travel Mouse" Vendor: 0x046d Device: 0xb006 "Dell BT Travel Mouse" Compatible to: int 0x0210 0x0048 Device File: /dev/input/mice (/dev/input/mouse2) Device Files: /dev/input/mice, /dev/input/mouse2, /dev/input/event10 Device Number: char 13:63 (char 13:34) Driver Info #0: Buttons: 8 Wheels: 4 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 53: None 00.0: 10103 CPU [Created at cpu.465] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.10 "Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm,ida Clock: 1217 MHz BogoMips: 3988.77 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 54: None 01.0: 10103 CPU [Created at cpu.465] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.10 "Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm,ida Clock: 2000 MHz BogoMips: 3988.77 Cache: 4096 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 55: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 56: None 00.0: 1070a WLAN [Created at net.126] Unique ID: AYEt.QXn1l67RSa1 Parent ID: y9sn.ewgitxEFqvB SysFS ID: /class/net/wlan0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 Hardware Class: network interface Model: "WLAN network interface" Driver: "wl" Driver Modules: "wl" Device File: wlan0 HW Address: ... Permanent HW Address: ... Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (WLAN controller) 57: None 01.0: 1070a WLAN [Created at net.126] Unique ID: djUx.QXn1l67RSa1 Parent ID: FKGF.8eqq3YEAjZB SysFS ID: /class/net/wlan1 SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0 Hardware Class: network interface Model: "WLAN network interface" Driver: "carl9170" Driver Modules: "carl9170" Device File: wlan1 HW Address: ... Permanent HW Address: ... Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #38 (WLAN controller)


Hardware for Linux and BSD

GitHub