Probe #3da091adc2 of Dell Latitude D830

Log: hwinfo

10: PCI c00.0: 0282 WLAN controller [Created at pci.386] Unique ID: e9JP.R_3Xvz9I_k9 Parent ID: qTvu._JPuTI1fJI1 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 SysFS BusID: 0000:0c:00.0 Hardware Class: network Model: "Intel PRO/Wireless 3945ABG [Golan] Network Connection" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x4222 "PRO/Wireless 3945ABG [Golan] Network Connection" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x1021 Revision: 0x02 Driver: "iwl3945" Driver Modules: "iwl3945" Device File: wlp12s0 Features: WLAN Memory Range: 0xfe8ff000-0xfe8fffff (rw,non-prefetchable) IRQ: 25 (57404 events) HW Address: 5766A8AAA1D2DC8D0336BC0736946E9C Permanent HW Address: 5766A8AAA1D2DC8D0336BC0736946E9C Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 34 36 38 40 42 44 46 48 52 56 60 64 100 104 108 112 116 120 124 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 5.17 5.18 5.19 5.2 5.21 5.22 5.23 5.24 5.26 5.28 5.3 5.32 5.5 5.52 5.54 5.56 5.58 5.6 5.62 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v00008086d00004222sv00008086sd00001021bc02sc80i00" Driver Info #0: Driver Status: iwl3945 is active Driver Activation Cmd: "modprobe iwl3945" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) 11: PCI 1f.2: 0101 IDE interface (PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering) [Created at pci.386] Unique ID: w7Y8.ilWidGuQ5w4 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2828 "82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x6eb0-0x6eb7 (rw) I/O Ports: 0x6eb8-0x6ebb (rw) I/O Ports: 0x6ec0-0x6ec7 (rw) I/O Ports: 0x6ec8-0x6ecb (rw) I/O Ports: 0x6ee0-0x6eef (rw) I/O Ports: 0xeff0-0xefff (rw) IRQ: 17 (233 events) Module Alias: "pci:v00008086d00002828sv00001028sd000001FEbc01sc01i8F" Driver Info #0: Driver Status: ata_piix is active Driver Activation Cmd: "modprobe ata_piix" Driver Info #1: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Driver Info #2: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.yUWOW9oEGX0 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283f "82801H (ICH8 Family) PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 16 (35660 events) Module Alias: "pci:v00008086d0000283Fsv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 900.0: 0200 Ethernet controller [Created at pci.386] Unique ID: 9Ky7.OGvJcTHvaTA Parent ID: HnsE.6eytJszHXM4 SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:09:00.0 SysFS BusID: 0000:09:00.0 Hardware Class: network Model: "Broadcom NetXtreme BCM5755M Gigabit Ethernet PCI Express" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x1673 "NetXtreme BCM5755M Gigabit Ethernet PCI Express" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "tg3" Driver Modules: "tg3" Device File: enp9s0 Memory Range: 0xfe5f0000-0xfe5fffff (rw,non-prefetchable) IRQ: 26 (2 events) HW Address: 3E1C70B305C0ABBF303AEA602C5C6751 Permanent HW Address: 3E1C70B305C0ABBF303AEA602C5C6751 Link detected: no Module Alias: "pci:v000014E4d00001673sv00001028sd000001FEbc02sc00i00" Driver Info #0: Driver Status: tg3 is active Driver Activation Cmd: "modprobe tg3" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (PCI bridge) 14: PCI 1a.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: gFpy.N2zg1u7Px90 SysFS ID: /devices/pci0000:00/0000:00:1a.1 SysFS BusID: 0000:00:1a.1 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #5" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2835 "82801H (ICH8 Family) USB UHCI Controller #5" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f00-0x6f1f (rw) IRQ: 21 (no events) Module Alias: "pci:v00008086d00002835sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.lSYo2Wd01wD SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801HM (ICH8M) LPC Interface Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2815 "82801HM (ICH8M) LPC Interface Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d00002815sv00001028sd000001FEbc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.JOBh6cfaqdE SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2831 "82801H (ICH8 Family) USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f60-0x6f7f (rw) IRQ: 21 (no events) Module Alias: "pci:v00008086d00002831sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 1c.5: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: HnsE.6eytJszHXM4 SysFS ID: /devices/pci0000:00/0000:00:1c.5 SysFS BusID: 0000:00:1c.5 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 6" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2849 "82801H (ICH8 Family) PCI Express Port 6" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 17 (233 events) Module Alias: "pci:v00008086d00002849sv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 02.1: 0380 Display controller [Created at pci.386] Unique ID: ruGf.LLg5m4wQl46 SysFS ID: /devices/pci0000:00/0000:00:02.1 SysFS BusID: 0000:00:02.1 Hardware Class: graphics card Model: "Intel Mobile GM965/GL960 Integrated Graphics Controller (secondary)" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a03 "Mobile GM965/GL960 Integrated Graphics Controller (secondary)" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x0c Memory Range: 0xfeb00000-0xfebfffff (rw,non-prefetchable) Module Alias: "pci:v00008086d00002A03sv00001028sd000001FEbc03sc80i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.bHIrUAw8+c5 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801H (ICH8 Family) HD Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x284b "82801H (ICH8 Family) HD Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfe9fc000-0xfe9fffff (rw,non-prefetchable) IRQ: 24 (278 events) Module Alias: "pci:v00008086d0000284Bsv00001028sd000001FEbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1c.3: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: Z7uZ.2_AuOaVTQq2 SysFS ID: /devices/pci0000:00/0000:00:1c.3 SysFS BusID: 0000:00:1c.3 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2845 "82801H (ICH8 Family) PCI Express Port 4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 19 (8 events) Module Alias: "pci:v00008086d00002845sv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.ooYp8sqaqb5 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 Mobile PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2448 "82801 Mobile PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0xf2 Module Alias: "pci:v00008086d00002448sv00001028sd000001FEbc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.2CLrtVY45R0 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel 82801H (ICH8 Family) SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283e "82801H (ICH8 Family) SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "i801_smbus" Driver Modules: "i2c_i801" Memory Range: 0xfe9fbf00-0xfe9fbfff (rw,non-prefetchable) I/O Ports: 0x10c0-0x10df (rw) IRQ: 17 (233 events) Module Alias: "pci:v00008086d0000283Esv00001028sd000001FEbc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.rW4jRw36lH4 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel Mobile PM965/GM965/GL960 Memory Controller Hub" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a00 "Mobile PM965/GM965/GL960 Memory Controller Hub" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x0c Module Alias: "pci:v00008086d00002A00sv00001028sd000001FEbc06sc00i00" Driver Info #0: Driver Status: intel_agp is active Driver Activation Cmd: "modprobe intel_agp" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: qTvu._JPuTI1fJI1 SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2841 "82801H (ICH8 Family) PCI Express Port 2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 17 (233 events) Module Alias: "pci:v00008086d00002841sv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 301.4: 0c00 FireWire (IEEE 1394) (OHCI) [Created at pci.386] Unique ID: PKI7.HM64qOBGGP1 Parent ID: 6NW+.ooYp8sqaqb5 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.4 SysFS BusID: 0000:03:01.4 Hardware Class: firewire controller Model: "O2 Micro Firewire (IEEE 1394)" Vendor: pci 0x1217 "O2 Micro, Inc." Device: pci 0x00f7 "Firewire (IEEE 1394)" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "firewire_ohci" Driver Modules: "firewire_ohci" Memory Range: 0xfe4ff000-0xfe4fffff (rw,non-prefetchable) Memory Range: 0xfe4fe800-0xfe4fefff (rw,non-prefetchable) IRQ: 19 (8 events) Module Alias: "pci:v00001217d000000F7sv00001028sd000001FEbc0Csc00i10" Driver Info #0: Driver Status: ohci1394 is not active Driver Activation Cmd: "modprobe ohci1394" Driver Info #1: Driver Status: firewire_ohci is active Driver Activation Cmd: "modprobe firewire_ohci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (PCI bridge) 26: PCI 1f.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: 3p2J.FOTqYeurREF SysFS ID: /devices/pci0000:00/0000:00:1f.1 SysFS BusID: 0000:00:1f.1 Hardware Class: storage Model: "Intel 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2850 "82801HM/HEM (ICH8M/ICH8M-E) IDE Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ata_piix" Driver Modules: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0x6fa0-0x6faf (rw) IRQ: 16 (35660 events) Module Alias: "pci:v00008086d00002850sv00001028sd000001FEbc01sc01i8A" Driver Info #0: Driver Status: ata_piix is active Driver Activation Cmd: "modprobe ata_piix" Driver Info #1: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Driver Info #2: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.qo7RbAnHM0F SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2832 "82801H (ICH8 Family) USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f40-0x6f5f (rw) IRQ: 22 (81 events) Module Alias: "pci:v00008086d00002832sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: PCI 1a.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: pwJ7.sd0xYJ0iPnF SysFS ID: /devices/pci0000:00/0000:00:1a.0 SysFS BusID: 0000:00:1a.0 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2834 "82801H (ICH8 Family) USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f20-0x6f3f (rw) IRQ: 20 (35188 events) Module Alias: "pci:v00008086d00002834sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 29: PCI 301.0: 0607 CardBus bridge [Created at pci.386] Unique ID: x0Ln.uUBxXW_K+F9 Parent ID: 6NW+.ooYp8sqaqb5 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.0 SysFS BusID: 0000:03:01.0 Hardware Class: bridge Model: "O2 Micro Cardbus bridge" Vendor: pci 0x1217 "O2 Micro, Inc." Device: pci 0x7135 "Cardbus bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x21 Driver: "yenta_cardbus" Driver Modules: "yenta_socket" Memory Range: 0xf4000000-0xf4000fff (rw,non-prefetchable) IRQ: 19 (8 events) Module Alias: "pci:v00001217d00007135sv00001028sd000001FEbc06sc07i00" Driver Info #0: Driver Status: yenta_socket is active Driver Activation Cmd: "modprobe yenta_socket" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (PCI bridge) 30: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.ozExd1YtIFE SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2830 "82801H (ICH8 Family) USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x6f80-0x6f9f (rw) IRQ: 20 (35188 events) Module Alias: "pci:v00008086d00002830sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 31: PCI 1a.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: sClz.S7HcjkYv5V5 SysFS ID: /devices/pci0000:00/0000:00:1a.7 SysFS BusID: 0000:00:1a.7 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB2 EHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283a "82801H (ICH8 Family) USB2 EHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xfed1c400-0xfed1c7ff (rw,non-prefetchable) IRQ: 22 (81 events) Module Alias: "pci:v00008086d0000283Asv00001028sd000001FEbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 32: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: _Znp.quITsEdmTT0 SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel 965 GM" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a02 "965 GM" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x0c Driver: "i915" Driver Modules: "i915" Memory Range: 0xfea00000-0xfeafffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) I/O Ports: 0xefe8-0xefef (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (35660 events) Module Alias: "pci:v00008086d00002A02sv00001028sd000001FEbc03sc00i00" Driver Info #0: XFree86 v4 Server Module: intel Driver Info #1: XFree86 v4 Server Module: intel 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown 33: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.OTVcoWks_N5 SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB2 EHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2836 "82801H (ICH8 Family) USB2 EHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ehci-pci" Driver Modules: "ehci_pci" Memory Range: 0xfed1c000-0xfed1c3ff (rw,non-prefetchable) IRQ: 20 (35188 events) Module Alias: "pci:v00008086d00002836sv00001028sd000001FEbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is active Driver Activation Cmd: "modprobe ehci-hcd" Driver Info #1: Driver Status: ehci_pci is active Driver Activation Cmd: "modprobe ehci_pci" Config Status: cfg=new, avail=yes, need=no, active=unknown 34: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.LISLfzypDz6 Parent ID: _Znp.quITsEdmTT0 Hardware Class: monitor Model: "DD286 LCD Monitor" Vendor: Q@L "DD286" Device: eisa 0x0056 Resolution: 1680x1050@60Hz Size: 331x207 mm Year of Manufacture: 2005 Week of Manufacture: 0 Detailed Timings #0: Resolution: 1680x1050 Horizontal: 1680 1712 1776 1904 (+32 +96 +224) -hsync Vertical: 1050 1051 1054 1066 (+1 +4 +16) -vsync Frequencies: 122.00 MHz, 64.08 kHz, 60.11 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (VGA compatible controller) 36: SCSI 400.0: 10600 Disk [Created at block.245] Unique ID: Zj8l.XdSf4vdjRg1 Parent ID: 5YuN.OTVcoWks_N5 SysFS ID: /class/block/sdb SysFS BusID: 4:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/host4/target4:0:0/4:0:0:0 Hardware Class: disk Model: "FUJITSU MHZ2080BH G2" Vendor: usb 0x1bcf "FUJITSU" Device: usb 0x0c31 "MHZ2080BH G2" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage", "sd_mod" Device File: /dev/sdb (/dev/sg2) Device Files: /dev/sdb, /dev/disk/by-path/pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0, /dev/disk/by-id/usb-FUJITSU_MHZ2080BH_G2_...-0:0, /dev/disk/by-diskseq/12 Device Number: block 8:16-8:31 (char 21:2) Geometry (Logical): CHS 9729/255/63 Size: 156301488 sectors a 512 bytes Capacity: 74 GB (80026361856 bytes) Speed: 480 Mbps Module Alias: "usb:v1BCFp0C31d010Fdc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #33 (USB Controller) 37: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.249] Unique ID: KD9E.TVjrqbsYze1 Parent ID: 3p2J.FOTqYeurREF SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST CDRW/DVD GCCT10N" Vendor: "HL-DT-ST" Device: "CDRW/DVD GCCT10N" Revision: "A100" Driver: "ata_piix", "sr" Driver Modules: "ata_piix", "sr_mod" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/cdrom, /dev/disk/by-path/pci-0000:00:1f.1-ata-1.0, /dev/cdrw, /dev/disk/by-id/ata-HL-DT-STCD-RW_DVD-ROM_..., /dev/dvd, /dev/disk/by-path/pci-0000:00:1f.1-ata-1, /dev/disk/by-diskseq/10 Device Number: block 11:0 (char 21:0) Features: CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD+R DL, MRW, MRW-W Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (IDE interface) Drive Speed: 24 38: IDE 200.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.Nc58XPfwYLE Parent ID: w7Y8.ilWidGuQ5w4 SysFS ID: /class/block/sda SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "SSDPR-CL100-120-" Device: "SSDPR-CL100-120-" Revision: "1A" Serial ID: -- Driver: "ata_piix", "sd" Driver Modules: "ata_piix", "sd_mod" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/ata-SSDPR-CL100-120-G3_..., /dev/disk/by-diskseq/11, /dev/disk/by-path/pci-0000:00:1f.2-ata-1, /dev/disk/by-id/wwn-0x..., /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0 Device Number: block 8:0-8:15 Geometry (Logical): CHS 14593/255/63 Size: 234441648 sectors a 512 bytes Capacity: 111 GB (120034123776 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (IDE interface) 39: None 00.0: 10600 Disk [Created at block.245] Unique ID: OKyR.Fxp0d3BezAE SysFS ID: /class/block/zram0 Hardware Class: disk Model: "Disk" Device File: /dev/zram0 Device Number: block 253:0 Size: 500224 sectors a 4096 bytes Capacity: 1 GB (2048917504 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown 41: USB 00.0: 10e00 Chipcard Reader [Created at usb.122] Unique ID: WOTD.Oqk5p9nndT1 Parent ID: datd.ZrTiaNBpvAA SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.2/7-1.2:1.0 SysFS BusID: 7-1.2:1.0 Hardware Class: chipcard Model: "O2 Micro OZ776 CCID Smartcard Reader" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7772 "OZ776 CCID Smartcard Reader" Revision: "1.10" Speed: 12 Mbps Module Alias: "usb:v0B97p7772d0110dc00dsc00dp00ic0Bisc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #47 (Hub) 42: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.gkSaZmjGyhD Parent ID: vayM.JOBh6cfaqdE SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0602dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (USB Controller) 43: USB 00.1: 11500 Bluetooth Device [Created at usb.122] Unique ID: DlBy.Ih8Guy4gXY8 Parent ID: uIhY.MxUuepIFPaE SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1 SysFS BusID: 3-2:1.1 Hardware Class: bluetooth Model: "Dell Wireless 360 Bluetooth" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0x8140 "Wireless 360 Bluetooth" Revision: "43.15" Driver: "btusb" Driver Modules: "btusb" Speed: 12 Mbps Module Alias: "usb:v413Cp8140d4315dcE0dsc01dp01icE0isc01ip01in01" Driver Info #0: Driver Status: btusb is active Driver Activation Cmd: "modprobe btusb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #44 (Hub) 44: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.MxUuepIFPaE Parent ID: pwJ7.sd0xYJ0iPnF SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0602dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #28 (USB Controller) 45: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT.RTX9xWW_uz4 Parent ID: mvRC.qo7RbAnHM0F SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0602dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (USB Controller) 46: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.7gZT0a5zLs5 Parent ID: gFpy.N2zg1u7Px90 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0602dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (USB Controller) 47: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: datd.ZrTiaNBpvAA Parent ID: BSFT.RTX9xWW_uz4 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0 SysFS BusID: 7-1:1.0 Hardware Class: hub Model: "O2 Micro Oz776 1.1 Hub" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7761 "Oz776 1.1 Hub" Revision: "1.10" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v0B97p7761d0110dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #45 (Hub) 49: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.cO89g+iefn1 Parent ID: sClz.S7HcjkYv5V5 SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0602dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (USB Controller) 51: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.v+N+B0xY+P6 Parent ID: 1GTX.ozExd1YtIFE SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0602dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #30 (USB Controller) 52: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.9T1GDCLyFd9 Parent ID: 5YuN.OTVcoWks_N5 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0602dc09dsc00dp00ic09isc00ip00in00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #33 (USB Controller) 53: PS/2 00.0: 10800 Keyboard [Created at input.226] Unique ID: nLyy.+49ps10DtUF Hardware Class: keyboard Model: "AT Translated Set 2 keyboard" Vendor: 0x0001 Device: 0x0001 "AT Translated Set 2 keyboard" Compatible to: int 0x0211 0x0001 Device File: /dev/input/event0 Device Files: /dev/input/event0, /dev/input/by-path/platform-i8042-serio-0-event-kbd Device Number: char 13:64 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 54: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.13 "Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm,ida Clock: 1196 MHz BogoMips: 3989.89 Cache: 2048 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 55: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.13 "Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm,ida Clock: 1196 MHz BogoMips: 3989.89 Cache: 2048 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 56: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 57: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: RE7Q.ndpeucax6V1 Parent ID: e9JP.R_3Xvz9I_k9 SysFS ID: /class/net/wlp12s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "iwl3945" Driver Modules: "iwl3945" Device File: wlp12s0 HW Address: 5766A8AAA1D2DC8D0336BC0736946E9C Permanent HW Address: 5766A8AAA1D2DC8D0336BC0736946E9C Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (WLAN controller) 58: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: qzC0.ndpeucax6V1 Parent ID: 9Ky7.OGvJcTHvaTA SysFS ID: /class/net/enp9s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.5/0000:09:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "tg3" Driver Modules: "tg3" Device File: enp9s0 HW Address: 3E1C70B305C0ABBF303AEA602C5C6751 Permanent HW Address: 3E1C70B305C0ABBF303AEA602C5C6751 Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (Ethernet controller)


Hardware for Linux and BSD

GitHub