09: PCI c00.0: 0280 Network controller [Created at pci.386] Unique ID: zb5c.IciJEdlj3K3 Parent ID: qTvu._JPuTI1fJI1 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 SysFS BusID: 0000:0c:00.0 Hardware Class: network Model: "Dell Wireless 1395 WLAN Mini-Card" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4315 "BCM4312 802.11b/g LP-PHY" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x000b "Wireless 1395 WLAN Mini-Card" Revision: 0x01 Driver: "b43-pci-bridge" Driver Modules: "ssb" Memory Range: 0xf1ffc000-0xf1ffffff (rw,non-prefetchable) IRQ: 17 (no events) Module Alias: "pci:v000014E4d00004315sv00001028sd0000000Bbc02sc80i00" Driver Info #0: Driver Status: ssb is active Driver Activation Cmd: "modprobe ssb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) 10: PCI 1f.2: 0101 IDE interface (PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering) [Created at pci.386] Unique ID: w7Y8.ilWidGuQ5w4 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2828 "82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ata_piix" I/O Ports: 0x6eb0-0x6eb7 (rw) I/O Ports: 0x6eb8-0x6ebb (rw) I/O Ports: 0x6ec0-0x6ec7 (rw) I/O Ports: 0x6ec8-0x6ecb (rw) I/O Ports: 0x6ee0-0x6eef (rw) I/O Ports: 0xeff0-0xefff (rw) IRQ: 18 (61232 events) Module Alias: "pci:v00008086d00002828sv00001028sd000001FEbc01sc01i8F" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.yUWOW9oEGX0 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283f "82801H (ICH8 Family) PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 16 (no events) Module Alias: "pci:v00008086d0000283Fsv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 900.0: 0200 Ethernet controller [Created at pci.386] Unique ID: 9Ky7.OGvJcTHvaTA Parent ID: HnsE.6eytJszHXM4 SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:09:00.0 SysFS BusID: 0000:09:00.0 Hardware Class: network Model: "Broadcom NetXtreme BCM5755M Gigabit Ethernet PCI Express" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x1673 "NetXtreme BCM5755M Gigabit Ethernet PCI Express" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "tg3" Driver Modules: "tg3" Device File: enp9s0 Memory Range: 0xf1bf0000-0xf1bfffff (rw,non-prefetchable) IRQ: 26 (516569 events) HW Address: E2D623B4D176E1F83FFF8E37CA538ABA Permanent HW Address: 40AEF122656109219E2B33D41C1A1BF2 Link detected: yes Module Alias: "pci:v000014E4d00001673sv00001028sd000001FEbc02sc00i00" Driver Info #0: Driver Status: tg3 is active Driver Activation Cmd: "modprobe tg3" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (PCI bridge) 13: PCI 1a.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: gFpy.N2zg1u7Px90 SysFS ID: /devices/pci0000:00/0000:00:1a.1 SysFS BusID: 0000:00:1a.1 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #5" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2835 "82801H (ICH8 Family) USB UHCI Controller #5" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" I/O Ports: 0x6f00-0x6f1f (rw) IRQ: 21 (1639 events) Module Alias: "pci:v00008086d00002835sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.lSYo2Wd01wD SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801HM (ICH8M) LPC Interface Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2815 "82801HM (ICH8M) LPC Interface Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d00002815sv00001028sd000001FEbc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.QnnIzbC1591 SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "Intel Mobile PM965/GM965/GL960 PCI Express Root Port" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a01 "Mobile PM965/GM965/GL960 PCI Express Root Port" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x0c Driver: "pcieport" IRQ: 16 (no events) Module Alias: "pci:v00008086d00002A01sv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.JOBh6cfaqdE SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2831 "82801H (ICH8 Family) USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" I/O Ports: 0x6f60-0x6f7f (rw) IRQ: 21 (1639 events) Module Alias: "pci:v00008086d00002831sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 1c.5: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: HnsE.6eytJszHXM4 SysFS ID: /devices/pci0000:00/0000:00:1c.5 SysFS BusID: 0000:00:1c.5 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 6" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2849 "82801H (ICH8 Family) PCI Express Port 6" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 17 (no events) Module Alias: "pci:v00008086d00002849sv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: VCu0.2bqUs3iMmMD Parent ID: vSkL.QnnIzbC1591 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "nVidia Quadro NVS 140M" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0429 "Quadro NVS 140M" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0xa1 Driver: "nouveau" Driver Modules: "nouveau" Memory Range: 0xf5000000-0xf5ffffff (rw,non-prefetchable) Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) Memory Range: 0xf2000000-0xf3ffffff (rw,non-prefetchable) I/O Ports: 0xdf00-0xdf7f (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 25 (65546 events) Module Alias: "pci:v000010DEd00000429sv00001028sd000001FEbc03sc00i00" Driver Info #0: XFree86 v4 Server Module: nv Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) 19: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.bHIrUAw8+c5 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801H (ICH8 Family) HD Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x284b "82801H (ICH8 Family) HD Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xf6ffc000-0xf6ffffff (rw,non-prefetchable) IRQ: 24 (605 events) Module Alias: "pci:v00008086d0000284Bsv00001028sd000001FEbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1c.3: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: Z7uZ.2_AuOaVTQq2 SysFS ID: /devices/pci0000:00/0000:00:1c.3 SysFS BusID: 0000:00:1c.3 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2845 "82801H (ICH8 Family) PCI Express Port 4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 19 (9 events) Module Alias: "pci:v00008086d00002845sv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.ooYp8sqaqb5 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 Mobile PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2448 "82801 Mobile PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0xf2 Module Alias: "pci:v00008086d00002448sv00001028sd000001FEbc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.2CLrtVY45R0 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel 82801H (ICH8 Family) SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283e "82801H (ICH8 Family) SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "i801_smbus" Driver Modules: "i2c_i801" Memory Range: 0xf6ffbf00-0xf6ffbfff (rw,non-prefetchable) I/O Ports: 0x10c0-0x10df (rw) IRQ: 17 (no events) Module Alias: "pci:v00008086d0000283Esv00001028sd000001FEbc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.rW4jRw36lH4 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel Mobile PM965/GM965/GL960 Memory Controller Hub" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a00 "Mobile PM965/GM965/GL960 Memory Controller Hub" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x0c Module Alias: "pci:v00008086d00002A00sv00001028sd000001FEbc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: qTvu._JPuTI1fJI1 SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel 82801H (ICH8 Family) PCI Express Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2841 "82801H (ICH8 Family) PCI Express Port 2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "pcieport" IRQ: 17 (no events) Module Alias: "pci:v00008086d00002841sv00001028sd000001FEbc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 301.4: 0c00 FireWire (IEEE 1394) (OHCI) [Created at pci.386] Unique ID: PKI7.HM64qOBGGP1 Parent ID: 6NW+.ooYp8sqaqb5 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.4 SysFS BusID: 0000:03:01.4 Hardware Class: firewire controller Model: "O2 Micro Firewire (IEEE 1394)" Vendor: pci 0x1217 "O2 Micro, Inc." Device: pci 0x00f7 "Firewire (IEEE 1394)" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "firewire_ohci" Driver Modules: "firewire_ohci" Memory Range: 0xf1aff000-0xf1afffff (rw,non-prefetchable) Memory Range: 0xf1afe800-0xf1afefff (rw,non-prefetchable) IRQ: 19 (9 events) Module Alias: "pci:v00001217d000000F7sv00001028sd000001FEbc0Csc00i10" Driver Info #0: Driver Status: ohci1394 is not active Driver Activation Cmd: "modprobe ohci1394" Driver Info #1: Driver Status: firewire_ohci is active Driver Activation Cmd: "modprobe firewire_ohci" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (PCI bridge) 26: PCI 1f.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: 3p2J.FOTqYeurREF SysFS ID: /devices/pci0000:00/0000:00:1f.1 SysFS BusID: 0000:00:1f.1 Hardware Class: storage Model: "Intel 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2850 "82801HM/HEM (ICH8M/ICH8M-E) IDE Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ata_piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0x6fa0-0x6faf (rw) IRQ: 16 (no events) Module Alias: "pci:v00008086d00002850sv00001028sd000001FEbc01sc01i8A" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.qo7RbAnHM0F SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2832 "82801H (ICH8 Family) USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" I/O Ports: 0x6f40-0x6f5f (rw) IRQ: 22 (74 events) Module Alias: "pci:v00008086d00002832sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: PCI 1a.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: pwJ7.sd0xYJ0iPnF SysFS ID: /devices/pci0000:00/0000:00:1a.0 SysFS BusID: 0000:00:1a.0 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2834 "82801H (ICH8 Family) USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" I/O Ports: 0x6f20-0x6f3f (rw) IRQ: 20 (10505 events) Module Alias: "pci:v00008086d00002834sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 29: PCI 301.0: 0607 CardBus bridge [Created at pci.386] Unique ID: x0Ln.uUBxXW_K+F9 Parent ID: 6NW+.ooYp8sqaqb5 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:01.0 SysFS BusID: 0000:03:01.0 Hardware Class: bridge Model: "O2 Micro Cardbus bridge" Vendor: pci 0x1217 "O2 Micro, Inc." Device: pci 0x7135 "Cardbus bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x21 Driver: "yenta_cardbus" Driver Modules: "yenta_socket" Memory Range: 0xfc000000-0xfc000fff (rw,non-prefetchable) IRQ: 19 (9 events) Module Alias: "pci:v00001217d00007135sv00001028sd000001FEbc06sc07i00" Driver Info #0: Driver Status: yenta_socket is active Driver Activation Cmd: "modprobe yenta_socket" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (PCI bridge) 30: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.ozExd1YtIFE SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2830 "82801H (ICH8 Family) USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "uhci_hcd" I/O Ports: 0x6f80-0x6f9f (rw) IRQ: 20 (10505 events) Module Alias: "pci:v00008086d00002830sv00001028sd000001FEbc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 31: PCI 1a.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: sClz.S7HcjkYv5V5 SysFS ID: /devices/pci0000:00/0000:00:1a.7 SysFS BusID: 0000:00:1a.7 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB2 EHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x283a "82801H (ICH8 Family) USB2 EHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xfed1c400-0xfed1c7ff (rw,non-prefetchable) IRQ: 22 (74 events) Module Alias: "pci:v00008086d0000283Asv00001028sd000001FEbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 32: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.OTVcoWks_N5 SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel 82801H (ICH8 Family) USB2 EHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2836 "82801H (ICH8 Family) USB2 EHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01fe Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xfed1c000-0xfed1c3ff (rw,non-prefetchable) IRQ: 20 (10505 events) Module Alias: "pci:v00008086d00002836sv00001028sd000001FEbc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 33: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.VQe6qusBTpB Parent ID: VCu0.2bqUs3iMmMD Hardware Class: monitor Model: "W649G 154WU1 LCD Monitor" Vendor: LPL "W649G 154WU1" Device: eisa 0xf200 Serial ID: -- Resolution: 640x480@60Hz Resolution: 800x600@60Hz Resolution: 1024x768@60Hz Resolution: 1280x1024@60Hz Resolution: 1600x1200@60Hz Resolution: 1920x1200@60Hz Size: 331x207 mm Year of Manufacture: 2007 Week of Manufacture: 0 Detailed Timings #0: Resolution: 1920x1200 Horizontal: 1920 1950 1980 2010 (+30 +60 +90) -hsync Vertical: 1200 1201 1204 1250 (+1 +4 +50) -vsync Frequencies: 150.75 MHz, 75.00 kHz, 60.00 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (VGA compatible controller) 35: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.259] Unique ID: KD9E.jFrKzXo6SA7 Parent ID: 3p2J.FOTqYeurREF SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "TSSTcorp DVD+-RW TS-L632H" Vendor: "TSSTcorp" Device: "DVD+-RW TS-L632H" Revision: "D400" Driver: "ata_piix", "sr" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/disk/by-id/ata-TSSTcorp_DVD+_-RW_..., /dev/cdrom, /dev/disk/by-path/pci-0000:00:1f.1-ata-1.0, /dev/disk/by-path/pci-0000:00:1f.1-ata-1 Device Number: block 11:0 (char 21:0) Features: DVD Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (IDE interface) Drive Speed: 24 36: IDE 200.0: 10600 Disk [Created at block.255] Unique ID: 3OOL.zcRS5S9tRqE Parent ID: w7Y8.ilWidGuQ5w4 SysFS ID: /class/block/sda SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "WDC WD3200BPVT-7" Vendor: "WDC" Device: "WD3200BPVT-7" Revision: "1A01" Driver: "ata_piix", "sd" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-path/pci-0000:00:1f.2-ata-1.0, /dev/disk/by-id/wwn-0x..., /dev/disk/by-path/pci-0000:00:1f.2-ata-1, /dev/disk/by-id/ata-WDC_WD3200BPVT-75ZEST0_... Device Number: block 8:0-8:15 BIOS id: 0x80 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (IDE interface) 37: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: UfPf.ZrTiaNBpvAA Parent ID: 2XnU.RTX9xWW_uz4 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb5/5-1/5-1:1.0 SysFS BusID: 5-1:1.0 Hardware Class: hub Model: "O2 Micro Oz776 1.1 Hub" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7761 "Oz776 1.1 Hub" Revision: "1.10" Driver: "hub" Speed: 12 Mbps Module Alias: "usb:v0B97p7761d0110dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #46 (Hub) 38: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.cO89g+iefn1 Parent ID: sClz.S7HcjkYv5V5 SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0602dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (USB Controller) 39: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.v+N+B0xY+P6 Parent ID: 1GTX.ozExd1YtIFE SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0602dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #30 (USB Controller) 40: USB 00.1: 0000 Unclassified device [Created at usb.122] Unique ID: wx05.p97M69KhO96 Parent ID: 2jVo._cOmnuCBvb4 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2.4/7-2.4:1.1 SysFS BusID: 7-2.4:1.1 Hardware Class: unknown Model: "Logitech Unifying Receiver" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc52f "Unifying Receiver" Revision: "30.00" Driver: "usbhid" Driver Modules: "usbhid" Speed: 12 Mbps Module Alias: "usb:v046DpC52Fd3000dc00dsc00dp00ic03isc00ip00in01" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #48 (Hub) 41: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT.9T1GDCLyFd9 Parent ID: 5YuN.OTVcoWks_N5 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0602dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (USB Controller) 42: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: wzl7.IDwQKWh1Oj7 Parent ID: BSFT.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb7/7-4/7-4:1.0 SysFS BusID: 7-4:1.0 Hardware Class: unknown Model: "Realtek RTL8812AU 802.11a/b/g/n/ac 2T2R DB WLAN Adapter" Hotplug: USB Vendor: usb 0x0bda "Realtek Semiconductor Corp." Device: usb 0x8812 "RTL8812AU 802.11a/b/g/n/ac 2T2R DB WLAN Adapter" Serial ID: -- Speed: 480 Mbps Module Alias: "usb:v0BDAp8812d0000dc00dsc00dp00icFFiscFFipFFin00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #41 (Hub) 43: USB 00.0: 0700 Serial controller [Created at usb.122] Unique ID: hSuP.lxxfXLi6bb9 Parent ID: pBe4.7gZT0a5zLs5 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0 SysFS BusID: 2-2:1.0 Hardware Class: unknown Model: "Dell Wireless 5720 Sprint Mobile Broadband (EVDO Rev-A) Minicard Status Port" Hotplug: USB Vendor: usb 0x413c "Dell Computer Corp." Device: usb 0x8134 "Wireless 5720 Sprint Mobile Broadband (EVDO Rev-A) Minicard Status Port" Driver: "option" Driver Modules: "usbserial" Device File: /dev/ttyUSB0 Device Files: /dev/ttyUSB0, /dev/serial/by-id/usb-Novatel_Wireless_Inc._Novatel_Wireless_...-if00-port0, /dev/serial/by-path/pci-0000:00:1a.1-usb-0:2:1.0-port0 Device Number: char 188:0 Speed: 12 Mbps Module Alias: "usb:v413Cp8134d0000dc00dsc00dp00icFFiscFFipFFin00" Driver Info #0: Driver Status: option is active Driver Activation Cmd: "modprobe option" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #51 (Hub) 44: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.gkSaZmjGyhD Parent ID: vayM.JOBh6cfaqdE SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0602dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (USB Controller) 45: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.MxUuepIFPaE Parent ID: pwJ7.sd0xYJ0iPnF SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0602dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #28 (USB Controller) 46: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.RTX9xWW_uz4 Parent ID: mvRC.qo7RbAnHM0F SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0602dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (USB Controller) 47: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: Smm0.+i6cPjf42e0 Parent ID: 2jVo._cOmnuCBvb4 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2.4/7-2.4:1.0 SysFS BusID: 7-2.4:1.0 Hardware Class: mouse Model: "Logitech Unifying Receiver" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc52f "Unifying Receiver" Revision: "30.00" Compatible to: int 0x0200 0x0001 "Generic USB Mouse" Driver: "usbhid" Driver Modules: "usbhid" Speed: 12 Mbps Module Alias: "usb:v046DpC52Fd3000dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #48 (Hub) 48: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2jVo._cOmnuCBvb4 Parent ID: BSFT.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb7/7-2/7-2:1.0 SysFS BusID: 7-2:1.0 Hardware Class: hub Model: "Cypress CY7C65640 USB-2.0 "TetraHub"" Hotplug: USB Vendor: usb 0x04b4 "Cypress Semiconductor Corp." Device: usb 0x6560 "CY7C65640 USB-2.0 "TetraHub"" Revision: "0.0b" Driver: "hub" Speed: 480 Mbps Module Alias: "usb:v04B4p6560d000Bdc09dsc00dp02ic09isc00ip02in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #41 (Hub) 49: USB 00.0: 10e00 Chipcard Reader [Created at usb.122] Unique ID: wiZD.Oqk5p9nndT1 Parent ID: UfPf.ZrTiaNBpvAA SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb5/5-1/5-1.2/5-1.2:1.0 SysFS BusID: 5-1.2:1.0 Hardware Class: chipcard Model: "O2 Micro OZ776 CCID Smartcard Reader" Hotplug: USB Vendor: usb 0x0b97 "O2 Micro, Inc." Device: usb 0x7772 "OZ776 CCID Smartcard Reader" Revision: "1.10" Speed: 12 Mbps Module Alias: "usb:v0B97p7772d0110dc00dsc00dp00ic0Bisc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #37 (Hub) 51: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.7gZT0a5zLs5 Parent ID: gFpy.N2zg1u7Px90 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "6.02" Serial ID: -- Driver: "hub" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0602dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (USB Controller) 52: PS/2 00.0: 10800 Keyboard [Created at input.226] Unique ID: 9ui9.+49ps10DtUF Hardware Class: keyboard Model: "AT Translated Set 2 keyboard" Vendor: 0x0001 Device: 0x0001 "AT Translated Set 2 keyboard" Compatible to: int 0x0211 0x0001 Device File: /dev/input/event3 Device Files: /dev/input/event3, /dev/input/by-path/platform-i8042-serio-0-event-kbd Device Number: char 13:67 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 53: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.5+smWHVjPI3 Hardware Class: mouse Model: "AlpsPS/2 ALPS DualPoint Stick" Vendor: 0x0002 Device: 0x0008 "AlpsPS/2 ALPS DualPoint Stick" Compatible to: int 0x0210 0x0003 Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event5 Device Number: char 13:63 (char 13:32) Driver Info #0: Buttons: 3 Wheels: 0 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 54: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.5+smWHVjPI3 Hardware Class: mouse Model: "AlpsPS/2 ALPS DualPoint TouchPad" Vendor: 0x0002 Device: 0x0008 "AlpsPS/2 ALPS DualPoint TouchPad" Compatible to: int 0x0210 0x0003 Device File: /dev/input/mice (/dev/input/mouse1) Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event6, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse Device Number: char 13:63 (char 13:33) Driver Info #0: Buttons: 3 Wheels: 0 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 55: None 00.0: 10103 CPU [Created at cpu.509] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.23.6 "Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,lahf_lm,pti,tpr_shadow,vnmi,flexpriority,vpid,dtherm,ida Clock: 1953 MHz BogoMips: 4986.18 Cache: 6144 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 56: None 01.0: 10103 CPU [Created at cpu.509] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.23.6 "Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,lahf_lm,pti,tpr_shadow,vnmi,flexpriority,vpid,dtherm,ida Clock: 1955 MHz BogoMips: 4986.18 Cache: 6144 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 57: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: j2Yp.ndpeucax6V1 SysFS ID: /class/net/virbr0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "bridge" Device File: virbr0 HW Address: B7C9EEF63BD9C1597915236605F55EB8 Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown 58: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: qzC0.ndpeucax6V1 Parent ID: 9Ky7.OGvJcTHvaTA SysFS ID: /class/net/enp9s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.5/0000:09:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "tg3" Driver Modules: "tg3" Device File: enp9s0 HW Address: E2D623B4D176E1F83FFF8E37CA538ABA Permanent HW Address: 40AEF122656109219E2B33D41C1A1BF2 Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (Ethernet controller) 59: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown