Probe #bed651dcbc of Dell 0200DY A01 Desktop Computer (OptiPlex 780)

Log: hwinfo

05: PCI 1f.2: 0104 RAID bus controller [Created at pci.386] Unique ID: w7Y8.NdTBtqNayp8 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel SATA Controller [RAID mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2822 "SATA Controller [RAID mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xfe00-0xfe07 (rw) I/O Ports: 0xfe10-0xfe13 (rw) I/O Ports: 0xfe20-0xfe27 (rw) I/O Ports: 0xfe30-0xfe33 (rw) I/O Ports: 0xfec0-0xfedf (rw) Memory Range: 0xff970000-0xff9707ff (rw,non-prefetchable) IRQ: 33 (29364 events) Module Alias: "pci:v00008086d00002822sv00001028sd00000420bc01sc04i00" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 06: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.CIYrkasOkI9 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel 82801JD/DO (ICH10 Family) PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a70 "82801JD/DO (ICH10 Family) PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "pcieport" IRQ: 30 (no events) Module Alias: "pci:v00008086d00003A70sv00001028sd00000420bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 07: PCI 1a.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: gFpy.fgtdDOnBTH8 SysFS ID: /devices/pci0000:00/0000:00:1a.1 SysFS BusID: 0000:00:1a.1 Hardware Class: usb controller Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #5" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a68 "82801JD/DO (ICH10 Family) USB UHCI Controller #5" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff00-0xff1f (rw) IRQ: 17 (35 events) Module Alias: "pci:v00008086d00003A68sv00001028sd00000420bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 08: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.DYNoFVRi9y4 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801JDO (ICH10DO) LPC Interface Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a14 "82801JDO (ICH10DO) LPC Interface Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d00003A14sv00001028sd00000420bc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 09: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.28of519iUvB SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "Intel 4 Series Chipset PCI Express Root Port" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2e11 "4 Series Chipset PCI Express Root Port" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x03 Driver: "pcieport" IRQ: 29 (no events) Module Alias: "pci:v00008086d00002E11sv00001028sd00000420bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 10: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.6R2OngQ4u77 SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a65 "82801JD/DO (ICH10 Family) USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff60-0xff7f (rw) IRQ: 17 (35 events) Module Alias: "pci:v00008086d00003A65sv00001028sd00000420bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: VCu0.n4Qx2tr4vqB Parent ID: vSkL.28of519iUvB SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "Dell Radeon HD 7470" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x6778 "Caicos XT [Radeon HD 7470/8470 / R5 235/310 OEM]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x2120 "Radeon HD 7470" Driver: "radeon" Driver Modules: "radeon" Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable) Memory Range: 0xf7de0000-0xf7dfffff (rw,non-prefetchable) I/O Ports: 0xdc00-0xdcff (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 37 (1302 events) Module Alias: "pci:v00001002d00006778sv00001028sd00002120bc03sc00i00" Driver Info #0: Driver Status: radeon is active Driver Activation Cmd: "modprobe radeon" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #9 (PCI bridge) 12: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.dH6p_cKR519 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801JD/DO (ICH10 Family) HD Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a6e "82801JD/DO (ICH10 Family) HD Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xf7fdc000-0xf7fdffff (rw,non-prefetchable) IRQ: 35 (630 events) Module Alias: "pci:v00008086d00003A6Esv00001028sd00000420bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 19.0: 0200 Ethernet controller [Created at pci.386] Unique ID: ID95.yafRmF4lKC9 SysFS ID: /devices/pci0000:00/0000:00:19.0 SysFS BusID: 0000:00:19.0 Hardware Class: network Model: "Intel 82567LM-3 Gigabit Network Connection" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x10de "82567LM-3 Gigabit Network Connection" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0276 Revision: 0x02 Driver: "e1000e" Driver Modules: "e1000e" Device File: enp0s25 Memory Range: 0xf7fe0000-0xf7ffffff (rw,non-prefetchable) Memory Range: 0xf7fd9000-0xf7fd9fff (rw,non-prefetchable) I/O Ports: 0xece0-0xecff (rw) IRQ: 32 (229091 events) HW Address: ... Permanent HW Address: ... Link detected: yes Module Alias: "pci:v00008086d000010DEsv00001028sd00000276bc02sc00i00" Driver Info #0: Driver Status: e1000e is active Driver Activation Cmd: "modprobe e1000e" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.5DYh1k2l5M6 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244e "82801 PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0xa2 Module Alias: "pci:v00008086d0000244Esv00001028sd00000420bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 03.2: 0101 IDE interface (PCI native mode-only controller, supports bus mastering) [Created at pci.386] Unique ID: nKpy.47cG4JmrdQ2 SysFS ID: /devices/pci0000:00/0000:00:03.2 SysFS BusID: 0000:00:03.2 Hardware Class: storage Model: "Intel 4 Series Chipset PT IDER Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2e16 "4 Series Chipset PT IDER Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x03 Driver: "ata_generic" Driver Modules: "ata_generic" I/O Ports: 0xfe80-0xfe87 (rw) I/O Ports: 0xfe90-0xfe93 (rw) I/O Ports: 0xfea0-0xfea7 (rw) I/O Ports: 0xfeb0-0xfeb3 (rw) I/O Ports: 0xfef0-0xfeff (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d00002E16sv00001028sd00000420bc01sc01i85" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.ZnC3vNrffS3 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel 82801JD/DO (ICH10 Family) SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a60 "82801JD/DO (ICH10 Family) SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "i801_smbus" Driver Modules: "i2c_i801" Memory Range: 0xf7fdb000-0xf7fdb0ff (rw,non-prefetchable) I/O Ports: 0x980-0x99f (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d00003A60sv00001028sd00000420bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.Tt44aL0n82F SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel 4 Series Chipset DRAM Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2e10 "4 Series Chipset DRAM Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x03 Module Alias: "pci:v00008086d00002E10sv00001028sd00000420bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: qTvu.E7RLij5pn3A SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel 82801JD/DO (ICH10 Family) PCI Express Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a72 "82801JD/DO (ICH10 Family) PCI Express Port 2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "pcieport" IRQ: 31 (no events) Module Alias: "pci:v00008086d00003A72sv00001028sd00000420bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1a.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: XaIo.A5qNiyuu_f8 SysFS ID: /devices/pci0000:00/0000:00:1a.2 SysFS BusID: 0000:00:1a.2 Hardware Class: usb controller Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #6" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a69 "82801JD/DO (ICH10 Family) USB UHCI Controller #6" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xfc00-0xfc1f (rw) IRQ: 22 (2 events) Module Alias: "pci:v00008086d00003A69sv00001028sd00000420bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 03.0: 0780 Communication controller [Created at pci.386] Unique ID: 3hqH.Y2rsQAZoR+1 SysFS ID: /devices/pci0000:00/0000:00:03.0 SysFS BusID: 0000:00:03.0 Hardware Class: unknown Model: "Intel 4 Series Chipset HECI Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2e14 "4 Series Chipset HECI Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x03 Driver: "mei_me" Driver Modules: "mei_me" Memory Range: 0xfeda6000-0xfeda600f (rw,non-prefetchable) IRQ: 34 (15 events) Module Alias: "pci:v00008086d00002E14sv00001028sd00000420bc07sc80i00" Driver Info #0: Driver Status: mei_me is active Driver Activation Cmd: "modprobe mei_me" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.dr_7GFYnPW7 SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a66 "82801JD/DO (ICH10 Family) USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff40-0xff5f (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d00003A66sv00001028sd00000420bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1a.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: pwJ7.8GxtkpfUxu7 SysFS ID: /devices/pci0000:00/0000:00:1a.0 SysFS BusID: 0000:00:1a.0 Hardware Class: usb controller Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a67 "82801JD/DO (ICH10 Family) USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff20-0xff3f (rw) IRQ: 16 (no events) Module Alias: "pci:v00008086d00003A67sv00001028sd00000420bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.b06eI6JNMl6 SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel 82801JD/DO (ICH10 Family) USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a64 "82801JD/DO (ICH10 Family) USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff80-0xff9f (rw) IRQ: 23 (46 events) Module Alias: "pci:v00008086d00003A64sv00001028sd00000420bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 100.1: 0403 Audio device [Created at pci.386] Unique ID: NXNs.PYD5jUqX+M3 Parent ID: vSkL.28of519iUvB SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.1 SysFS BusID: 0000:01:00.1 Hardware Class: sound Model: "ATI Caicos HDMI Audio [Radeon HD 6450 / 7450/8450/8490 OEM / R5 230/235/235X OEM]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0xaa98 "Caicos HDMI Audio [Radeon HD 6450 / 7450/8450/8490 OEM / R5 230/235/235X OEM]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0xaa98 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xf7ddc000-0xf7ddffff (rw,non-prefetchable) IRQ: 36 (99 events) Module Alias: "pci:v00001002d0000AA98sv00001028sd0000AA98bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #9 (PCI bridge) 25: PCI 1a.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: sClz.DLFpQkkm5fE SysFS ID: /devices/pci0000:00/0000:00:1a.7 SysFS BusID: 0000:00:1a.7 Hardware Class: usb controller Model: "Intel 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a6c "82801JD/DO (ICH10 Family) USB2 EHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xf7fda000-0xf7fda3ff (rw,non-prefetchable) IRQ: 22 (2 events) Module Alias: "pci:v00008086d00003A6Csv00001028sd00000420bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.BWMJTbVM2uD SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3a6a "82801JD/DO (ICH10 Family) USB2 EHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xff980000-0xff9803ff (rw,non-prefetchable) IRQ: 23 (46 events) Module Alias: "pci:v00008086d00003A6Asv00001028sd00000420bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 03.3: 0700 Serial controller (16550) [Created at pci.386] Unique ID: ffIo.7ezMzUvNmK4 SysFS ID: /devices/pci0000:00/0000:00:03.3 SysFS BusID: 0000:00:03.3 Hardware Class: unknown Model: "Intel 4 Series Chipset Serial KT Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2e17 "4 Series Chipset Serial KT Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0420 Revision: 0x03 Driver: "serial" I/O Ports: 0xecb8-0xecbf (rw) Memory Range: 0xf7fd8000-0xf7fd8fff (rw,non-prefetchable) IRQ: 17 (35 events) Module Alias: "pci:v00008086d00002E17sv00001028sd00000420bc07sc00i02" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.mC7fFyNz75B Parent ID: VCu0.n4Qx2tr4vqB Hardware Class: monitor Model: "HP 27xi" Vendor: HWP "HP" Device: eisa 0x3037 "HP 27xi" Serial ID: -- Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 800x600@60Hz Resolution: 1024x768@60Hz Resolution: 1920x1080@60Hz Resolution: 1280x720@60Hz Resolution: 1280x1024@60Hz Size: 600x340 mm Year of Manufacture: 2013 Week of Manufacture: 36 Detailed Timings #0: Resolution: 1920x1080 Horizontal: 1920 2008 2052 2200 (+88 +132 +280) +hsync Vertical: 1080 1084 1089 1125 (+4 +9 +45) +vsync Frequencies: 148.50 MHz, 67.50 kHz, 60.00 Hz Driver Info #0: Max. Resolution: 1920x1080 Vert. Sync Range: 50-76 Hz Hor. Sync Range: 24-94 kHz Bandwidth: 148 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (VGA compatible controller) 29: SCSI 300.0: 10600 Disk [Created at block.245] Unique ID: KD9E.t+RZnqfhp79 Parent ID: w7Y8.NdTBtqNayp8 SysFS ID: /class/block/sr0 SysFS BusID: 3:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata4/host3/target3:0:0/3:0:0:0 Hardware Class: disk Model: "PLDS DVD+-RW DH-16ABS" Vendor: "PLDS" Device: "DVD+-RW DH-16ABS" Revision: "PD11" Driver: "ahci", "sr" Driver Modules: "ahci" Device File: /dev/sr0 (/dev/sg1) Device Number: block 11:0 (char 21:1) BIOS id: 0x80 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (RAID bus controller) 30: IDE 200.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.jBlZBPYLgo8 Parent ID: w7Y8.NdTBtqNayp8 SysFS ID: /class/block/sda SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "WDC WD10EZEX-75W" Vendor: "WDC" Device: "WD10EZEX-75W" Revision: "1A01" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Number: block 8:0-8:15 BIOS id: 0x81 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (RAID bus controller) 31: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.v+N+B0xY+P6 Parent ID: 1GTX.b06eI6JNMl6 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.04" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #23 (USB Controller) 32: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.MxUuepIFPaE Parent ID: pwJ7.8GxtkpfUxu7 SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.04" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (USB Controller) 33: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: ZmS7.QIUY9RNBTmB Parent ID: 7eqy.v+N+B0xY+P6 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0 SysFS BusID: 6-1:1.0 Hardware Class: keyboard Model: "China Resource Semico USB Keyboard" Hotplug: USB Vendor: usb 0x1a2c "China Resource Semico Co., Ltd" Device: usb 0x0b2a "USB Keyboard" Revision: "1.10" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event2 Device Number: char 13:66 Speed: 1.5 Mbps Module Alias: "usb:v1A2Cp0B2Ad0110dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (Hub) 34: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT.gkSaZmjGyhD Parent ID: vayM.6R2OngQ4u77 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.04" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (USB Controller) 35: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.7gZT0a5zLs5 Parent ID: gFpy.fgtdDOnBTH8 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.04" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #7 (USB Controller) 36: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: FZIx.RTX9xWW_uz4 Parent ID: mvRC.dr_7GFYnPW7 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb8/8-0:1.0 SysFS BusID: 8-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.04" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (USB Controller) 37: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.cO89g+iefn1 Parent ID: sClz.DLFpQkkm5fE SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.04" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0504dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (USB Controller) 38: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: PYMB.QCp8a6_hVP5 Parent ID: zPk0.7gZT0a5zLs5 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0 SysFS BusID: 4-1:1.0 Hardware Class: mouse Model: "Pixart Imaging Optical Mouse" Hotplug: USB Vendor: usb 0x093a "Pixart Imaging, Inc." Device: usb 0x2510 "Optical Mouse" Revision: "1.00" Compatible to: int 0x0200 0x0001 "Generic USB Mouse" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Number: char 13:63 (char 13:32) Speed: 1.5 Mbps Module Alias: "usb:v093Ap2510d0100dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #35 (Hub) 39: USB 00.1: 0000 Unclassified device [Created at usb.122] Unique ID: 0yiB.9PZiWzAnNp5 Parent ID: 7eqy.v+N+B0xY+P6 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1 SysFS BusID: 6-1:1.1 Hardware Class: unknown Model: "China Resource Semico USB Keyboard" Hotplug: USB Vendor: usb 0x1a2c "China Resource Semico Co., Ltd" Device: usb 0x0b2a "USB Keyboard" Revision: "1.10" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event5 Device Number: char 13:69 Speed: 1.5 Mbps Module Alias: "usb:v1A2Cp0B2Ad0110dc00dsc00dp00ic03isc00ip00in01" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #31 (Hub) 40: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.uOe2OKugI8D Parent ID: XaIo.A5qNiyuu_f8 SysFS ID: /devices/pci0000:00/0000:00:1a.2/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.04" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0504dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (USB Controller) 41: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.9T1GDCLyFd9 Parent ID: 5YuN.BWMJTbVM2uD SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.04" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0504dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #26 (USB Controller) 42: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.23.10 "Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,xsave,lahf_lm,pti,tpr_shadow,vnmi,flexpriority,dtherm Clock: 2986 MHz BogoMips: 5985.23 Cache: 6144 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 43: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.23.10 "Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4_1,xsave,lahf_lm,pti,tpr_shadow,vnmi,flexpriority,dtherm Clock: 2880 MHz BogoMips: 5985.23 Cache: 6144 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 44: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 45: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: 4Iz5.ndpeucax6V1 Parent ID: ID95.yafRmF4lKC9 SysFS ID: /class/net/enp0s25 SysFS Device Link: /devices/pci0000:00/0000:00:19.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "e1000e" Driver Modules: "e1000e" Device File: enp0s25 HW Address: ... Permanent HW Address: ... Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (Ethernet controller)


Hardware for Linux and BSD

GitHub