10: PCI 13.4: 0c03 USB Controller (OHCI) [Created at pci.378] Unique ID: llZ8.voveHibMJAA SysFS ID: /devices/pci0000:00/0000:00:13.4 SysFS BusID: 0000:00:13.4 Hardware Class: usb controller Model: "ATI SB600 USB (OHCI4)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x438b "SB600 USB (OHCI4)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "ohci-pci" Memory Range: 0xfebfa000-0xfebfafff (rw,non-prefetchable) IRQ: 18 (2 events) Module Alias: "pci:v00001002d0000438Bsv00001043sd00001417bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 13.2: 0c03 USB Controller (OHCI) [Created at pci.378] Unique ID: 06bT.tz09KZMyFP9 SysFS ID: /devices/pci0000:00/0000:00:13.2 SysFS BusID: 0000:00:13.2 Hardware Class: usb controller Model: "ATI SB600 USB (OHCI2)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4389 "SB600 USB (OHCI2)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "ohci-pci" Memory Range: 0xfebfc000-0xfebfcfff (rw,non-prefetchable) IRQ: 18 (2 events) Module Alias: "pci:v00001002d00004389sv00001043sd00001417bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 200.0: 0282 WLAN controller [Created at pci.378] Unique ID: qru8.oTCoeEt5Tw6 Parent ID: 8otl._kL2iqISfD6 SysFS ID: /devices/pci0000:00/0000:00:04.0/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "AzureWave AW-GE780 802.11bg Wireless Mini PCIe Card" Vendor: pci 0x168c "Qualcomm Atheros" Device: pci 0x001c "AR242x / AR542x Wireless Network Adapter (PCI-Express)" SubVendor: pci 0x1a3b "AzureWave" SubDevice: pci 0x1026 "AW-GE780 802.11bg Wireless Mini PCIe Card" Revision: 0x01 Driver: "ath5k" Driver Modules: "ath5k" Device File: wlp2s0 Features: WLAN Memory Range: 0xfa9f0000-0xfa9fffff (rw,non-prefetchable) IRQ: 16 (239883 events) HW Address: ... Permanent HW Address: ... Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v0000168Cd0000001Csv00001A3Bsd00001026bc02sc00i00" Driver Info #0: Driver Status: ath5k is active Driver Activation Cmd: "modprobe ath5k" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) 13: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.378] Unique ID: vSkL.4UFp5fHqms6 SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "ATI RC4xx/RS4xx PCI Bridge [int gfx]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x5a3f "RC4xx/RS4xx PCI Bridge [int gfx]" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x5a3f Module Alias: "pci:v00001002d00005A3Fsv00001002sd00005A3Fbc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 13.0: 0c03 USB Controller (OHCI) [Created at pci.378] Unique ID: HSco.r88fMQ7YCe8 SysFS ID: /devices/pci0000:00/0000:00:13.0 SysFS BusID: 0000:00:13.0 Hardware Class: usb controller Model: "ATI SB600 USB (OHCI0)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4387 "SB600 USB (OHCI0)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "ohci-pci" Memory Range: 0xfebfe000-0xfebfefff (rw,non-prefetchable) IRQ: 16 (239883 events) Module Alias: "pci:v00001002d00004387sv00001043sd00001417bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 04.0: 0604 PCI bridge (Normal decode) [Created at pci.378] Unique ID: 8otl._kL2iqISfD6 SysFS ID: /devices/pci0000:00/0000:00:04.0 SysFS BusID: 0000:00:04.0 Hardware Class: bridge Model: "ATI RC4xx/RS4xx PCI Express Port 1" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x5a36 "RC4xx/RS4xx PCI Express Port 1" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "pcieport" Module Alias: "pci:v00001002d00005A36sv00001043sd00001417bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 14.3: 0601 ISA bridge [Created at pci.378] Unique ID: yX7n.ZIo8V4rZPr4 SysFS ID: /devices/pci0000:00/0000:00:14.3 SysFS BusID: 0000:00:14.3 Hardware Class: bridge Model: "ATI SB600 PCI to LPC Bridge" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x438d "SB600 PCI to LPC Bridge" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Module Alias: "pci:v00001002d0000438Dsv00001043sd00001417bc06sc01i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 07.0: 0604 PCI bridge (Normal decode) [Created at pci.378] Unique ID: M71A.X_AI8U+nEy5 SysFS ID: /devices/pci0000:00/0000:00:07.0 SysFS BusID: 0000:00:07.0 Hardware Class: bridge Model: "ATI RC4xx/RS4xx PCI Express Port 4" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x5a39 "RC4xx/RS4xx PCI Express Port 4" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "pcieport" Module Alias: "pci:v00001002d00005A39sv00001043sd00001417bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 14.1: 0101 IDE interface [Created at pci.378] Unique ID: Eu86.+sAh5M0sGg2 SysFS ID: /devices/pci0000:00/0000:00:14.1 SysFS BusID: 0000:00:14.1 Hardware Class: storage Model: "ATI SB600 IDE" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x438c "SB600 IDE" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "pata_atiixp" Driver Modules: "pata_atiixp" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xff00-0xff0f (rw) IRQ: 16 (239883 events) Module Alias: "pci:v00001002d0000438Csv00001043sd00001417bc01sc01i82" Driver Info #0: Driver Status: pata_atiixp is active Driver Activation Cmd: "modprobe pata_atiixp" Driver Info #1: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 00.0: 0600 Host bridge [Created at pci.378] Unique ID: qLht.seEYon7iJtB SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "ATI RC410 Host Bridge" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x5a31 "RC410 Host Bridge" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Revision: 0x01 Module Alias: "pci:v00001002d00005A31sv00001043sd00001417bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 13.5: 0c03 USB Controller (EHCI) [Created at pci.378] Unique ID: c43_.ak__0Mt_IPE SysFS ID: /devices/pci0000:00/0000:00:13.5 SysFS BusID: 0000:00:13.5 Hardware Class: usb controller Model: "ATI SB600 USB Controller (EHCI)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4386 "SB600 USB Controller (EHCI)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "ehci-pci" Memory Range: 0xfebff800-0xfebff8ff (rw,non-prefetchable) IRQ: 19 (7013 events) Module Alias: "pci:v00001002d00004386sv00001043sd00001417bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 12.0: 0106 SATA controller (AHCI 1.0) [Created at pci.378] Unique ID: CLZK.NkJyk9m1dPA SysFS ID: /devices/pci0000:00/0000:00:12.0 SysFS BusID: 0000:00:12.0 Hardware Class: storage Model: "ATI SB600 Non-Raid-5 SATA" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4380 "SB600 Non-Raid-5 SATA" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xe800-0xe807 (rw) I/O Ports: 0xe400-0xe403 (rw) I/O Ports: 0xe000-0xe007 (rw) I/O Ports: 0xdc00-0xdc03 (rw) I/O Ports: 0xd800-0xd80f (rw) Memory Range: 0xfebffc00-0xfebfffff (rw,non-prefetchable) IRQ: 22 (33362 events) Module Alias: "pci:v00001002d00004380sv00001043sd00001417bc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 600.0: 0200 Ethernet controller [Created at pci.378] Unique ID: 4Nnf.KzmrTqfccB0 Parent ID: H0_h.0aEYfvt4jZ5 SysFS ID: /devices/pci0000:00/0000:00:06.0/0000:06:00.0 SysFS BusID: 0000:06:00.0 Hardware Class: network Model: "Qualcomm Atheros Attansic L2 Fast Ethernet" Vendor: pci 0x1969 "Qualcomm Atheros" Device: pci 0x2048 "Attansic L2 Fast Ethernet" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1415 Revision: 0xa0 Driver: "atl2" Driver Modules: "atl2" Device File: enp6s0 Memory Range: 0xfeac0000-0xfeafffff (rw,non-prefetchable) Memory Range: 0xfeaa0000-0xfeabffff (ro,non-prefetchable,disabled) IRQ: 24 (1 event) HW Address: ... Permanent HW Address: ... Link detected: no Module Alias: "pci:v00001969d00002048sv00001043sd00001415bc02sc00i00" Driver Info #0: Driver Status: atl2 is active Driver Activation Cmd: "modprobe atl2" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) 23: PCI 13.3: 0c03 USB Controller (OHCI) [Created at pci.378] Unique ID: tQ4J.OOzuo7Ufnn9 SysFS ID: /devices/pci0000:00/0000:00:13.3 SysFS BusID: 0000:00:13.3 Hardware Class: usb controller Model: "ATI SB600 USB (OHCI3)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x438a "SB600 USB (OHCI3)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "ohci-pci" Memory Range: 0xfebfb000-0xfebfbfff (rw,non-prefetchable) IRQ: 17 (13686 events) Module Alias: "pci:v00001002d0000438Asv00001043sd00001417bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 06.0: 0604 PCI bridge (Normal decode) [Created at pci.378] Unique ID: H0_h.0aEYfvt4jZ5 SysFS ID: /devices/pci0000:00/0000:00:06.0 SysFS BusID: 0000:00:06.0 Hardware Class: bridge Model: "ATI RC4xx/RS4xx PCI Express Port 3" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x5a38 "RC4xx/RS4xx PCI Express Port 3" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "pcieport" Module Alias: "pci:v00001002d00005A38sv00001043sd00001417bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 13.1: 0c03 USB Controller (OHCI) [Created at pci.378] Unique ID: 9n5e.MZ4Pr_EFk09 SysFS ID: /devices/pci0000:00/0000:00:13.1 SysFS BusID: 0000:00:13.1 Hardware Class: usb controller Model: "ATI SB600 USB (OHCI1)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4388 "SB600 USB (OHCI1)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "ohci-pci" Memory Range: 0xfebfd000-0xfebfdfff (rw,non-prefetchable) IRQ: 17 (13686 events) Module Alias: "pci:v00001002d00004388sv00001043sd00001417bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 14.4: 0604 PCI bridge (Subtractive decode) [Created at pci.378] Unique ID: qscc.ULOo3yhA66C SysFS ID: /devices/pci0000:00/0000:00:14.4 SysFS BusID: 0000:00:14.4 Hardware Class: bridge Model: "ATI SBx00 PCI to PCI Bridge" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4384 "SBx00 PCI to PCI Bridge" Module Alias: "pci:v00001002d00004384sv00000000sd00000000bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 105.0: 0300 VGA compatible controller (VGA) [Created at pci.378] Unique ID: ul7N.ki6N8VLN_JB Parent ID: vSkL.4UFp5fHqms6 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0 SysFS BusID: 0000:01:05.0 Hardware Class: graphics card Model: "ATI Radeon XPRESS 200M 5A62 (PCIE)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x5a62 "Radeon XPRESS 200M 5A62 (PCIE)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1402 Driver: "radeon" Driver Modules: "radeon" Memory Range: 0xa0000000-0xafffffff (ro,non-prefetchable) I/O Ports: 0x9800-0x98ff (rw) Memory Range: 0xfa8f0000-0xfa8fffff (rw,non-prefetchable) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 17 (13686 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00001002d00005A62sv00001043sd00001402bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: radeon Driver Info #1: XFree86 v4 Server Module: fglrx 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (PCI bridge) 28: PCI 14.2: 0403 Audio device [Created at pci.378] Unique ID: 5Dex.IOFetRyhSn6 SysFS ID: /devices/pci0000:00/0000:00:14.2 SysFS BusID: 0000:00:14.2 Hardware Class: sound Model: "ATI SBx00 Azalia (Intel HDA)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4383 "SBx00 Azalia (Intel HDA)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1339 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfebf4000-0xfebf7fff (rw,non-prefetchable) IRQ: 16 (239883 events) Module Alias: "pci:v00001002d00004383sv00001043sd00001339bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 29: PCI 14.0: 0c05 SMBus [Created at pci.378] Unique ID: MZfG.OKP4CfZTkL4 SysFS ID: /devices/pci0000:00/0000:00:14.0 SysFS BusID: 0000:00:14.0 Hardware Class: unknown Model: "ATI SBx00 SMBus Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4385 "SBx00 SMBus Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Revision: 0x13 I/O Ports: 0xb00-0xb0f (rw) Module Alias: "pci:v00001002d00004385sv00001043sd00001417bc0Csc05i00" Driver Info #0: Driver Status: i2c_piix4 is active Driver Activation Cmd: "modprobe i2c_piix4" Driver Info #1: Driver Status: sp5100_tco is active Driver Activation Cmd: "modprobe sp5100_tco" Config Status: cfg=new, avail=yes, need=no, active=unknown 30: PCI 05.0: 0604 PCI bridge (Normal decode) [Created at pci.378] Unique ID: CvwD.V9IoALmNBB5 SysFS ID: /devices/pci0000:00/0000:00:05.0 SysFS BusID: 0000:00:05.0 Hardware Class: bridge Model: "ATI RC4xx/RS4xx PCI Express Port 2" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x5a37 "RC4xx/RS4xx PCI Express Port 2" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1417 Driver: "pcieport" Module Alias: "pci:v00001002d00005A37sv00001043sd00001417bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 31: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.uwraFhjTrl7 Parent ID: ul7N.ki6N8VLN_JB Hardware Class: monitor Model: "LGPhilipsLCD LCD Monitor" Vendor: LPL "LGPhilipsLCD" Device: eisa 0xe300 Resolution: 1280x800@60Hz Size: 331x207 mm Year of Manufacture: 2006 Week of Manufacture: 0 Detailed Timings #0: Resolution: 1280x800 Horizontal: 1280 1328 1360 1440 (+48 +80 +160) -hsync Vertical: 800 803 809 823 (+3 +9 +23) -vsync Frequencies: 71.00 MHz, 49.31 kHz, 59.91 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (VGA compatible controller) 32: SCSI 300.0: 10600 Disk [Created at block.256] Unique ID: Uc5H.DZFL9I7xHYF Parent ID: c43_.ak__0Mt_IPE SysFS ID: /class/block/sdb SysFS BusID: 3:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:13.5/usb1/1-4/1-4:1.0/host3/target3:0:0/3:0:0:0 Hardware Class: disk Model: "Generic xD/SDMMC/MS/Pro" Vendor: usb 0x0bda "Generic-" Device: usb 0x0116 "xD/SDMMC/MS/Pro" Revision: "1.00" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage" Device File: /dev/sdb (/dev/sg2) Device Files: /dev/sdb, /dev/disk/by-id/usb-Generic-_xD_SDMMC_MS_Pro_...-0:0, /dev/disk/by-path/pci-0000:00:13.5-usb-0:4:1.0-scsi-0:0:0:0 Device Number: block 8:16-8:31 (char 21:2) Geometry (Logical): CHS 1024/0/62 Speed: 480 Mbps Module Alias: "usb:v0BDAp0116d1610dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 33: SCSI 500.0: 10602 CD-ROM (DVD) [Created at block.249] Unique ID: KD9E.Hhj2fbamOB6 Parent ID: Eu86.+sAh5M0sGg2 SysFS ID: /class/block/sr0 SysFS BusID: 5:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:14.1/ata5/host5/target5:0:0/5:0:0:0 Hardware Class: cdrom Model: "MATSHITA DVD-RAM UJ-860S" Vendor: "MATSHITA" Device: "DVD-RAM UJ-860S" Revision: "1.00" Driver: "pata_atiixp", "sr" Driver Modules: "pata_atiixp" Device File: /dev/sr0 (/dev/sg1) Device Files: /dev/sr0, /dev/disk/by-id/ata-MATSHITADVD-RAM_UJ-860S_RE00_..., /dev/disk/by-path/pci-0000:00:14.1-ata-1, /dev/cdrw, /dev/dvdrw, /dev/dvd, /dev/cdrom Device Number: block 11:0 (char 21:1) Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL, DVD-RAM, MRW, MRW-W Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (IDE interface) Drive Speed: 24 34: IDE 00.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.AuXMDvL_mD2 Parent ID: CLZK.NkJyk9m1dPA SysFS ID: /class/block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:12.0/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "KINGSTON SHFS37A" Vendor: "KINGSTON" Device: "SHFS37A" Revision: "BBF2" Serial ID: -- Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-path/pci-0000:00:12.0-ata-1, /dev/disk/by-id/ata-KINGSTON_SHFS37A120G_..., /dev/disk/by-id/wwn-0x... Device Number: block 8:0-8:15 Geometry (Logical): CHS 14593/255/63 Size: 234441648 sectors a 512 bytes Capacity: 111 GB (120034123776 bytes) Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (SATA controller) 35: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.im6ZNd17JfE Parent ID: llZ8.voveHibMJAA SysFS ID: /devices/pci0000:00/0000:00:13.4/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (USB Controller) 36: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: FKGF.nCDL1Y7Ia88 Parent ID: pBe4.erpEvbsFWX1 SysFS ID: /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0 SysFS BusID: 2-1:1.0 Hardware Class: mouse Model: "USB OPTICAL MOUSE" Hotplug: USB Vendor: usb 0x0000 Device: usb 0x3825 "USB OPTICAL MOUSE" Revision: "1.00" Compatible to: int 0x0210 0x0013 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse1) Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event10, /dev/input/by-path/pci-0000:00:13.0-usb-0:1:1.0-event-mouse, /dev/input/by-path/pci-0000:00:13.0-usb-0:1:1.0-mouse Device Number: char 13:63 (char 13:33) Speed: 1.5 Mbps Module Alias: "usb:v0000p3825d0100dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: Buttons: 3 Wheels: 1 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #43 (Hub) 37: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.PaupGMfzSp8 Parent ID: 9n5e.MZ4Pr_EFk09 SysFS ID: /devices/pci0000:00/0000:00:13.1/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (USB Controller) 38: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: X7GA.l11zRplJCe2 Parent ID: k4bc.MrJLBLcWB9F SysFS ID: /devices/pci0000:00/0000:00:13.5/usb1/1-7/1-7:1.0 SysFS BusID: 1-7:1.0 Hardware Class: unknown Model: "Syntek Web Cam - Asus A8J, F3S, F5R, VX2S, V1S" Hotplug: USB Vendor: usb 0x174f "Syntek" Device: usb 0x6a31 "Web Cam - Asus A8J, F3S, F5R, VX2S, V1S" Revision: "0.05" Driver: "stk1135" Driver Modules: "gspca_stk1135" Speed: 480 Mbps Module Alias: "usb:v174Fp6A31d0005dc00dsc00dp00icFFiscFFipFFin00" Driver Info #0: Driver Status: gspca_stk1135 is active Driver Activation Cmd: "modprobe gspca_stk1135" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #40 (Hub) 39: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.AJzOe6ShP50 Parent ID: 06bT.tz09KZMyFP9 SysFS ID: /devices/pci0000:00/0000:00:13.2/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (USB Controller) 40: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.MrJLBLcWB9F Parent ID: c43_.ak__0Mt_IPE SysFS ID: /devices/pci0000:00/0000:00:13.5/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 42: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.x12_+sEPMN7 Parent ID: tQ4J.OOzuo7Ufnn9 SysFS ID: /devices/pci0000:00/0000:00:13.3/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #23 (USB Controller) 43: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.erpEvbsFWX1 Parent ID: HSco.r88fMQ7YCe8 SysFS ID: /devices/pci0000:00/0000:00:13.0/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (USB Controller) 44: PS/2 00.0: 10800 Keyboard [Created at input.226] Unique ID: c3zD.+49ps10DtUF Hardware Class: keyboard Model: "AT Translated Set 2 keyboard" Vendor: 0x0001 Device: 0x0001 "AT Translated Set 2 keyboard" Compatible to: int 0x0211 0x0001 Device File: /dev/input/event4 Device Files: /dev/input/event4, /dev/input/by-path/platform-i8042-serio-0-event-kbd Device Number: char 13:68 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 45: PS/2 00.0: 10500 PS/2 Mouse [Created at input.249] Unique ID: AH6Q.ZHI3OT7LsxA Hardware Class: mouse Model: "SynPS/2 Synaptics TouchPad" Vendor: 0x0002 Device: 0x0007 "SynPS/2 Synaptics TouchPad" Compatible to: int 0x0210 0x0002 Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event9, /dev/input/by-path/platform-i8042-serio-4-event-mouse, /dev/input/by-path/platform-i8042-serio-4-mouse Device Number: char 13:63 (char 13:32) Driver Info #0: Buttons: 2 Wheels: 0 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 46: None 00.0: 10103 CPU [Created at cpu.457] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.13 "Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 1475 MHz BogoMips: 2993.27 Cache: 2048 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 47: None 01.0: 10103 CPU [Created at cpu.457] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.13 "Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 1480 MHz BogoMips: 2993.27 Cache: 2048 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 48: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: l02Y.ndpeucax6V1 Parent ID: 4Nnf.KzmrTqfccB0 SysFS ID: /class/net/enp6s0 SysFS Device Link: /devices/pci0000:00/0000:00:06.0/0000:06:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "atl2" Driver Modules: "atl2" Device File: enp6s0 HW Address: ... Permanent HW Address: ... Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (Ethernet controller) 49: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: VV91.ndpeucax6V1 Parent ID: qru8.oTCoeEt5Tw6 SysFS ID: /class/net/wlp2s0 SysFS Device Link: /devices/pci0000:00/0000:00:04.0/0000:02:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "ath5k" Driver Modules: "ath5k" Device File: wlp2s0 HW Address: ... Permanent HW Address: ... Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (WLAN controller) 50: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown