System: Kernel: 4.12.14-lp151.28.91-default x86_64 bits: 64 compiler: gcc v: 7.5.0 Console: N/A dm: N/A Distro: openSUSE Leap 15.1 Machine: Type: Server System: FUJITSU product: PRIMERGY RX300 S5 v: GS01 Chassis: type: 23 v: RX300S5R1 Mobo: FUJITSU model: D2619 v: S26361-D2619-A14 WGS05 GS03 BIOS: FUJITSU // Phoenix v: 6.00 Rev. 1.14.2619 date: 02/04/2013 CPU: Topology: 2x Quad Core model: Intel Xeon E5520 bits: 64 type: MT MCP SMP arch: Nehalem rev: 5 L1 cache: 512 KiB L2 cache: 16.0 MiB L3 cache: 16.0 MiB flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 72532 Speed: 1600 MHz min/max: 1596/2262 MHz boost: enabled Core speeds (MHz): 1: 1600 2: 1600 3: 1600 4: 1600 5: 1600 6: 1599 7: 1600 8: 1600 9: 1599 10: 1600 11: 1599 12: 1600 13: 1600 14: 1600 15: 1602 16: 1600 Graphics: Device-1: Matrox Systems MGA G200e [Pilot] ServerEngines vendor: Fujitsu Solutions driver: mgag200 v: kernel bus ID: 09:00.0 chip ID: 102b:0522 Display: server: No display server data found. Headless machine? tty: 133x25 Message: Advanced graphics data unavailable in console for root. Audio: Message: No Device data found. Network: Device-1: Intel 82571EB/82571GB Gigabit Ethernet D0/D1 driver: e1000e v: 3.2.6-k port: 5000 bus ID: 04:00.0 chip ID: 8086:105e IF: eth0 state: down Device-2: Intel 82571EB/82571GB Gigabit Ethernet D0/D1 driver: e1000e v: 3.2.6-k port: 5020 bus ID: 04:00.1 chip ID: 8086:105e IF: eth2 state: down Device-3: Intel 82575EB Gigabit Network vendor: Fujitsu Solutions driver: igb v: 5.6.0-k port: 6000 bus ID: 08:00.0 chip ID: 8086:10a7 IF: eth1 state: up speed: 100 Mbps duplex: full Device-4: Intel 82575EB Gigabit Network vendor: Fujitsu Solutions driver: igb v: 5.6.0-k port: 6020 bus ID: 08:00.1 chip ID: 8086:10a7 IF: eth3 state: up speed: 100 Mbps duplex: full IF-ID-1: bond0 state: up speed: 100 Mbps duplex: full IF-ID-2: bonding_masters state: N/A speed: N/A duplex: N/A mac: N/A IF-ID-3: br-521dbf26543f state: up speed: N/A duplex: N/A IF-ID-4: br-9116ab7c8351 state: down IF-ID-5: br-f51e7e081f47 state: down IF-ID-6: docker0 state: down IF-ID-7: vethe61027d state: up speed: 10000 Mbps duplex: full IF-ID-8: vethfcea4c0 state: up speed: 10000 Mbps duplex: full Drives: Local Storage: total: 730.16 GiB used: 33.45 GiB (4.6%) ID-1: /dev/sda model: Logical Volume size: 594.18 GiB serial: ... rev: 3000 scheme: GPT ID-2: /dev/sdb model: Logical Volume size: 135.97 GiB serial: ... rev: 3000 scheme: MBR Partition: ID-1: / size: 9.78 GiB used: 2.85 GiB (29.2%) fs: ext4 dev: /dev/dm-0 ID-2: /boot size: 477.1 MiB used: 72.3 MiB (15.2%) fs: ext4 dev: /dev/sdb1 ID-3: /home size: 19.99 GiB used: 53.3 MiB (0.3%) fs: xfs dev: /dev/dm-2 ID-4: /tmp size: 4.86 GiB used: 20.0 MiB (0.4%) fs: ext4 dev: /dev/dm-3 ID-5: /var size: 11.75 GiB used: 584.8 MiB (4.9%) fs: ext4 dev: /dev/dm-4 ID-6: swap-1 size: 2.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-1 Sensors: Message: No ipmi sensors data was found. System Temperatures: lm-sensors cpu: 37.0 C mobo: N/A Fan Speeds (RPM): lm-sensors N/A Info: Processes: 281 Uptime: N/A Memory: 15.65 GiB used: 702.6 MiB (4.4%) Init: systemd v: 234 runlevel: 3 target: multi-user.target Compilers: gcc: N/A Shell: bash v: 4.4.23 inxi: 3.0.38