/dev/sda === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z5K320 Device Model: Hitachi HTS543232A7A384 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ES2OA60W User Capacity: 320 068 705 792 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Apr 20 03:56:55 2017 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 97) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 197 197 040 - 151 3 Spin_Up_Time POS--- 241 241 033 - 1 4 Start_Stop_Count -O--C- 099 099 000 - 2684 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 107 107 040 - 37 9 Power_On_Hours -O--C- 058 058 000 - 18809 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 2463 191 G-Sense_Error_Rate -O-R-- 096 096 000 - 9 192 Power-Off_Retract_Count -O--CK 099 099 000 - 337 193 Load_Cycle_Count -O--C- 017 017 000 - 834822 194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 7/80) 196 Reallocated_Event_Count -O--CK 100 100 000 - 120 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 11 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 11 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 11 [2] occurred at disk power-on lifetime: 16992 hours (708 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 a1 00 00 0d 5c 0a c6 0d 00 Error: ICRC, ABRT 161 sectors at LBA = 0x0d5c0ac6 = 224135878 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 0d 5c 0a 67 e0 00 05:56:00.732 READ DMA EXT 25 00 00 01 00 00 00 0d 57 3d 17 e0 00 05:56:00.722 READ DMA EXT 25 00 00 00 80 00 00 0d 57 37 5f e0 00 05:56:00.721 READ DMA EXT 25 00 00 01 00 00 00 0d 57 36 5f e0 00 05:56:00.710 READ DMA EXT 25 00 00 00 80 00 00 0d 57 30 7f e0 00 05:56:00.710 READ DMA EXT Error 10 [1] occurred at disk power-on lifetime: 11447 hours (476 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 61 84 56 00 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00618456 = 6390870 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 61 84 4f e0 00 01:02:28.806 READ DMA EXT 25 00 00 00 08 00 00 00 61 84 57 e0 00 01:02:28.805 READ DMA EXT 25 00 00 00 08 00 00 07 63 11 d7 e0 00 01:02:28.787 READ DMA EXT 25 00 00 00 08 00 00 00 61 84 ef e0 00 01:02:28.785 READ DMA EXT 25 00 00 00 08 00 00 00 61 84 f7 e0 00 01:02:28.785 READ DMA EXT Error 9 [0] occurred at disk power-on lifetime: 11447 hours (476 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 8c a2 be 00 00 Error: ICRC, ABRT 1 sectors at LBA = 0x008ca2be = 9216702 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 8c a2 b7 e0 00 01:02:27.629 READ DMA EXT ea 00 00 00 00 00 08 b6 00 00 00 a0 00 01:02:27.607 FLUSH CACHE EXT 25 00 00 00 08 00 00 00 8c a2 af e0 00 01:02:27.590 READ DMA EXT 25 00 00 00 08 00 00 00 03 6e 4f e0 00 01:02:27.576 READ DMA EXT 35 00 00 00 28 00 00 00 5b db cf e0 00 01:02:27.576 WRITE DMA EXT Error 8 [3] occurred at disk power-on lifetime: 10134 hours (422 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 5b db 4e 00 00 Error: ICRC, ABRT 1 sectors at LBA = 0x005bdb4e = 6019918 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 30 00 00 00 5b db 1f e0 00 09:13:53.371 WRITE DMA EXT ea 00 00 00 00 5b db a6 00 00 00 a0 00 09:13:53.333 FLUSH CACHE EXT 35 00 00 00 08 00 00 00 5b db 9f e0 00 09:13:53.333 WRITE DMA EXT 35 00 00 00 38 00 00 00 2c e6 7f e0 00 09:13:53.333 WRITE DMA EXT 35 00 00 00 30 00 00 00 5b da f7 e0 00 09:13:53.332 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 23/38 Celsius Lifetime Min/Max Temperature: 7/80 Celsius Lifetime Average Temperature: 36 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (104) Index Estimated Time Temperature Celsius 105 2017-04-20 01:49 34 *************** 106 2017-04-20 01:50 33 ************** 107 2017-04-20 01:51 33 ************** 108 2017-04-20 01:52 33 ************** 109 2017-04-20 01:53 32 ************* ... ..( 5 skipped). .. ************* 115 2017-04-20 01:59 32 ************* 116 2017-04-20 02:00 31 ************ ... ..( 2 skipped). .. ************ 119 2017-04-20 02:03 31 ************ 120 2017-04-20 02:04 32 ************* 121 2017-04-20 02:05 31 ************ 122 2017-04-20 02:06 31 ************ 123 2017-04-20 02:07 31 ************ 124 2017-04-20 02:08 32 ************* ... ..( 82 skipped). .. ************* 79 2017-04-20 03:31 32 ************* 80 2017-04-20 03:32 31 ************ ... ..( 13 skipped). .. ************ 94 2017-04-20 03:46 31 ************ 95 2017-04-20 03:47 32 ************* ... ..( 8 skipped). .. ************* 104 2017-04-20 03:56 32 ************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2463 --- Lifetime Power-On Resets 0x01 0x010 4 18809 --- Power-on Hours 0x01 0x018 6 52665833710 --- Logical Sectors Written 0x01 0x020 6 895876010 --- Number of Write Commands 0x01 0x028 6 53150876772 --- Logical Sectors Read 0x01 0x030 6 813100329 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 17364 --- Spindle Motor Power-on Hours 0x03 0x010 4 17298 --- Head Flying Hours 0x03 0x018 4 834822 --- Head Load Events 0x03 0x020 4 107 --- Number of Reallocated Logical Sectors 0x03 0x028 4 3654 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3822 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x010 1 34 N-- Average Short Term Temperature 0x05 0x018 1 35 N-- Average Long Term Temperature 0x05 0x020 1 80 --- Highest Temperature 0x05 0x028 1 7 --- Lowest Temperature 0x05 0x030 1 70 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 63 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 59780 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 10281 --- Number of Hardware Resets 0x06 0x010 4 5378 --- Number of ASR Events 0x06 0x018 4 11 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS