/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F3 Device Model: SAMSUNG HD103SJ Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AJ10001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon May 18 15:30:04 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Disabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled SMART Disabled. Use option -s with argument 'on' to enable it. (override with '-T permissive' option) /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SandForce[290900] Serial Number: -- LU WWN Device Id: 5 00232d ... Firmware Version: 2.1a User Capacity: 115,033,153,536 bytes [115 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon May 18 15:30:04 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Disabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown (0x100) SMART Disabled. Use option -s with argument 'on' to enable it. (override with '-T permissive' option) /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-29-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT03B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon May 18 15:30:04 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1182 12 Power_Cycle_Count -O--CK 099 099 000 - 2 177 Wear_Leveling_Count PO--C- 099 099 000 - 1 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 072 063 000 - 28 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 100 100 000 - 0 241 Total_LBAs_Written -O--CK 099 099 000 - 1231747445 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 17/34 Celsius Lifetime Min/Max Temperature: 17/40 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (67) Index Estimated Time Temperature Celsius 68 2020-05-17 18:20 29 ********** 69 2020-05-17 18:30 28 ********* 70 2020-05-17 18:40 28 ********* 71 2020-05-17 18:50 28 ********* 72 2020-05-17 19:00 29 ********** 73 2020-05-17 19:10 29 ********** 74 2020-05-17 19:20 30 *********** 75 2020-05-17 19:30 30 *********** 76 2020-05-17 19:40 29 ********** ... ..( 3 skipped). .. ********** 80 2020-05-17 20:20 29 ********** 81 2020-05-17 20:30 30 *********** 82 2020-05-17 20:40 29 ********** 83 2020-05-17 20:50 28 ********* ... ..( 11 skipped). .. ********* 95 2020-05-17 22:50 28 ********* 96 2020-05-17 23:00 27 ******** ... ..( 6 skipped). .. ******** 103 2020-05-18 00:10 27 ******** 104 2020-05-18 00:20 26 ******* 105 2020-05-18 00:30 26 ******* 106 2020-05-18 00:40 27 ******** ... ..( 3 skipped). .. ******** 110 2020-05-18 01:20 27 ******** 111 2020-05-18 01:30 26 ******* 112 2020-05-18 01:40 26 ******* 113 2020-05-18 01:50 25 ****** ... ..( 20 skipped). .. ****** 6 2020-05-18 05:20 25 ****** 7 2020-05-18 05:30 24 ***** 8 2020-05-18 05:40 25 ****** 9 2020-05-18 05:50 26 ******* ... ..( 10 skipped). .. ******* 20 2020-05-18 07:40 26 ******* 21 2020-05-18 07:50 25 ****** ... ..( 2 skipped). .. ****** 24 2020-05-18 08:20 25 ****** 25 2020-05-18 08:30 26 ******* 26 2020-05-18 08:40 25 ****** 27 2020-05-18 08:50 26 ******* 28 2020-05-18 09:00 25 ****** 29 2020-05-18 09:10 27 ******** 30 2020-05-18 09:20 26 ******* 31 2020-05-18 09:30 26 ******* 32 2020-05-18 09:40 26 ******* 33 2020-05-18 09:50 27 ******** 34 2020-05-18 10:00 26 ******* 35 2020-05-18 10:10 27 ******** 36 2020-05-18 10:20 26 ******* ... ..( 8 skipped). .. ******* 45 2020-05-18 11:50 26 ******* 46 2020-05-18 12:00 27 ******** 47 2020-05-18 12:10 26 ******* 48 2020-05-18 12:20 27 ******** 49 2020-05-18 12:30 27 ******** 50 2020-05-18 12:40 26 ******* 51 2020-05-18 12:50 26 ******* 52 2020-05-18 13:00 28 ********* 53 2020-05-18 13:10 27 ******** 54 2020-05-18 13:20 27 ******** 55 2020-05-18 13:30 27 ******** 56 2020-05-18 13:40 28 ********* 57 2020-05-18 13:50 28 ********* 58 2020-05-18 14:00 27 ******** 59 2020-05-18 14:10 27 ******** 60 2020-05-18 14:20 26 ******* ... ..( 3 skipped). .. ******* 64 2020-05-18 15:00 26 ******* 65 2020-05-18 15:10 27 ******** 66 2020-05-18 15:20 28 ********* 67 2020-05-18 15:30 30 *********** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2 --- Lifetime Power-On Resets 0x01 0x010 4 1182 --- Power-on Hours 0x01 0x018 6 1231747445 --- Logical Sectors Written 0x01 0x020 6 10662440 --- Number of Write Commands 0x01 0x028 6 331858124 --- Logical Sectors Read 0x01 0x030 6 4698600 --- Number of Read Commands 0x01 0x038 6 2593000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 28 --- Current Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 131 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 126 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 126 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC