/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile Device Model: WDC WD10JPVX-22JC3T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Jan 7 15:20:58 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (18240) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 204) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 182 176 021 - 1866 4 Start_Stop_Count -O--CK 001 001 000 - 105563 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 090 090 000 - 7640 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1862 191 G-Sense_Error_Rate -O--CK 096 096 000 - 4 192 Power-Off_Retract_Count -O--CK 200 200 000 - 98 193 Load_Cycle_Count -O--CK 100 100 000 - 301067 194 Temperature_Celsius -O---K 112 100 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 6371 - # 2 Short offline Completed without error 00% 6367 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 23/41 Celsius Lifetime Min/Max Temperature: 17/47 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (96) Index Estimated Time Temperature Celsius 97 2019-01-07 13:13 34 *************** ... ..( 7 skipped). .. *************** 105 2019-01-07 13:21 34 *************** 106 2019-01-07 13:22 ? - 107 2019-01-07 13:23 34 *************** 108 2019-01-07 13:24 34 *************** 109 2019-01-07 13:25 ? - 110 2019-01-07 13:26 34 *************** 111 2019-01-07 13:27 35 **************** 112 2019-01-07 13:28 36 ***************** 113 2019-01-07 13:29 36 ***************** 114 2019-01-07 13:30 ? - 115 2019-01-07 13:31 36 ***************** ... ..( 10 skipped). .. ***************** 126 2019-01-07 13:42 36 ***************** 127 2019-01-07 13:43 35 **************** ... ..( 25 skipped). .. **************** 25 2019-01-07 14:09 35 **************** 26 2019-01-07 14:10 ? - 27 2019-01-07 14:11 35 **************** 28 2019-01-07 14:12 35 **************** 29 2019-01-07 14:13 35 **************** 30 2019-01-07 14:14 ? - 31 2019-01-07 14:15 35 **************** 32 2019-01-07 14:16 ? - 33 2019-01-07 14:17 36 ***************** ... ..( 3 skipped). .. ***************** 37 2019-01-07 14:21 36 ***************** 38 2019-01-07 14:22 ? - 39 2019-01-07 14:23 36 ***************** ... ..( 6 skipped). .. ***************** 46 2019-01-07 14:30 36 ***************** 47 2019-01-07 14:31 37 ****************** 48 2019-01-07 14:32 38 ******************* ... ..( 2 skipped). .. ******************* 51 2019-01-07 14:35 38 ******************* 52 2019-01-07 14:36 39 ******************** 53 2019-01-07 14:37 39 ******************** 54 2019-01-07 14:38 40 ********************* 55 2019-01-07 14:39 40 ********************* 56 2019-01-07 14:40 40 ********************* 57 2019-01-07 14:41 41 ********************** 58 2019-01-07 14:42 40 ********************* 59 2019-01-07 14:43 40 ********************* 60 2019-01-07 14:44 39 ******************** 61 2019-01-07 14:45 39 ******************** 62 2019-01-07 14:46 38 ******************* 63 2019-01-07 14:47 38 ******************* 64 2019-01-07 14:48 38 ******************* 65 2019-01-07 14:49 37 ****************** ... ..( 2 skipped). .. ****************** 68 2019-01-07 14:52 37 ****************** 69 2019-01-07 14:53 36 ***************** ... ..( 17 skipped). .. ***************** 87 2019-01-07 15:11 36 ***************** 88 2019-01-07 15:12 35 **************** ... ..( 7 skipped). .. **************** 96 2019-01-07 15:20 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 18800 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 21 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 9969 Vendor specific