/dev/sda smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.4.38-gentoo_B75M-D3H] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 840 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXT0DB6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun May 17 16:18:52 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0001 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4800) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 80) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 6242 12 Power_Cycle_Count -O--CK 098 098 000 - 1739 177 Wear_Leveling_Count PO--C- 091 091 000 - 102 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 072 043 000 - 28 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 055 055 000 - 44762 235 POR_Recovery_Count -O--C- 099 099 000 - 1058 241 Total_LBAs_Written -O--CK 099 099 000 - 20382363884 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 16 Device vendor specific log 0xce GPL,SL VS 16 Device vendor specific log 0xde SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/37565 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (0) Index Estimated Time Temperature Celsius 1 2020-05-16 19:00 ? - ... ..(126 skipped). .. - 0 2020-05-17 16:10 ? - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.4.38-gentoo_B75M-D3H] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 7K500 Device Model: Hitachi HTS725050A9A362 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: PC4ACB1E User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Sun May 17 16:18:52 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 148 148 033 - 2 4 Start_Stop_Count -O--C- 099 099 000 - 2968 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 075 075 000 - 11097 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 2934 160 Unknown_Attribute -O--CK 100 100 000 - 0 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 575525617664 192 Power-Off_Retract_Count -O--CK 100 100 000 - 257701904468 193 Load_Cycle_Count -O--C- 097 097 000 - 36066 194 Temperature_Celsius -O---- 211 211 000 - 26 (Min/Max 3/52) 195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 254 Free_Fall_Sensor -O--CK 089 089 000 - 4294970148 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa2 SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 22/26 Celsius Lifetime Min/Max Temperature: 3/52 Celsius Specified Max Operating Temperature: 33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 478 (161) Index Estimated Time Temperature Celsius 162 2020-05-17 08:21 38 ******************* ... ..(227 skipped). .. ******************* 390 2020-05-17 12:09 38 ******************* 391 2020-05-17 12:10 37 ****************** ... ..( 27 skipped). .. ****************** 419 2020-05-17 12:38 37 ****************** 420 2020-05-17 12:39 38 ******************* 421 2020-05-17 12:40 37 ****************** 422 2020-05-17 12:41 38 ******************* ... ..( 47 skipped). .. ******************* 470 2020-05-17 13:29 38 ******************* 471 2020-05-17 13:30 37 ****************** ... ..( 68 skipped). .. ****************** 62 2020-05-17 14:39 37 ****************** 63 2020-05-17 14:40 36 ***************** 64 2020-05-17 14:41 37 ****************** 65 2020-05-17 14:42 36 ***************** ... ..( 21 skipped). .. ***************** 87 2020-05-17 15:04 36 ***************** 88 2020-05-17 15:05 35 **************** ... ..( 12 skipped). .. **************** 101 2020-05-17 15:18 35 **************** 102 2020-05-17 15:19 34 *************** ... ..( 49 skipped). .. *************** 152 2020-05-17 16:09 34 *************** 153 2020-05-17 16:10 22 *** 154 2020-05-17 16:11 22 *** 155 2020-05-17 16:12 23 **** 156 2020-05-17 16:13 23 **** 157 2020-05-17 16:14 24 ***** 158 2020-05-17 16:15 24 ***** 159 2020-05-17 16:16 25 ****** 160 2020-05-17 16:17 25 ****** 161 2020-05-17 16:18 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.4.38-gentoo_B75M-D3H] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 7K500 Device Model: Hitachi HTS725050A9A362 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: PC4ACB1E User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Sun May 17 16:18:53 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 147 147 033 - 2 4 Start_Stop_Count -O--C- 099 099 000 - 1696 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 075 075 000 - 11310 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1656 160 Unknown_Attribute -O--CK 100 100 000 - 0 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 206158430208 192 Power-Off_Retract_Count -O--CK 100 100 000 - 38656081976 193 Load_Cycle_Count -O--C- 053 053 000 - 473435 194 Temperature_Celsius -O---- 211 211 000 - 26 (Min/Max 14/50) 195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 254 Free_Fall_Sensor -O--CK 098 098 000 - 705 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa2 SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 22/26 Celsius Lifetime Min/Max Temperature: 14/50 Celsius Specified Max Operating Temperature: 33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 478 (314) Index Estimated Time Temperature Celsius 315 2020-05-17 08:21 37 ****************** ... ..(226 skipped). .. ****************** 64 2020-05-17 12:08 37 ****************** 65 2020-05-17 12:09 36 ***************** ... ..( 15 skipped). .. ***************** 81 2020-05-17 12:25 36 ***************** 82 2020-05-17 12:26 37 ****************** ... ..( 2 skipped). .. ****************** 85 2020-05-17 12:29 37 ****************** 86 2020-05-17 12:30 36 ***************** 87 2020-05-17 12:31 37 ****************** ... ..( 57 skipped). .. ****************** 145 2020-05-17 13:29 37 ****************** 146 2020-05-17 13:30 36 ***************** 147 2020-05-17 13:31 37 ****************** ... ..( 7 skipped). .. ****************** 155 2020-05-17 13:39 37 ****************** 156 2020-05-17 13:40 36 ***************** ... ..( 54 skipped). .. ***************** 211 2020-05-17 14:35 36 ***************** 212 2020-05-17 14:36 35 **************** ... ..( 8 skipped). .. **************** 221 2020-05-17 14:45 35 **************** 222 2020-05-17 14:46 34 *************** ... ..( 21 skipped). .. *************** 244 2020-05-17 15:08 34 *************** 245 2020-05-17 15:09 33 ************** ... ..( 19 skipped). .. ************** 265 2020-05-17 15:29 33 ************** 266 2020-05-17 15:30 32 ************* 267 2020-05-17 15:31 33 ************** 268 2020-05-17 15:32 32 ************* ... ..( 27 skipped). .. ************* 296 2020-05-17 16:00 32 ************* 297 2020-05-17 16:01 33 ************** ... ..( 7 skipped). .. ************** 305 2020-05-17 16:09 33 ************** 306 2020-05-17 16:10 22 *** 307 2020-05-17 16:11 22 *** 308 2020-05-17 16:12 23 **** 309 2020-05-17 16:13 24 ***** 310 2020-05-17 16:14 24 ***** 311 2020-05-17 16:15 25 ****** 312 2020-05-17 16:16 25 ****** 313 2020-05-17 16:17 25 ****** 314 2020-05-17 16:18 26 ******* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdd smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.4.38-gentoo_B75M-D3H] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Fujitsu MJA BH Device Model: FUJITSU MJA2160BH FFS G1 Serial Number: -- LU WWN Device Id: 5 00000e ... Firmware Version: 0081001D User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 3f SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Sun May 17 16:18:55 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 508) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 72) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 046 - 0 2 Throughput_Performance P-S--- 100 100 030 - 0 3 Spin_Up_Time PO---- 100 100 025 - 0 4 Start_Stop_Count -O--CK 099 099 000 - 4524 5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 7 Seek_Error_Rate POSR-- 100 100 047 - 0 8 Seek_Time_Performance P-S--- 100 100 019 - 0 9 Power_On_Hours -O--CK 084 084 000 - 8491 10 Spin_Retry_Count PO--C- 100 100 020 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 4311 160 Unknown_Attribute -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 94495440993 193 Load_Cycle_Count -O--CK 099 099 000 - 27304 194 Temperature_Celsius -O---K 100 100 000 - 24 (Min/Max 12/43) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 253 000 - 0 200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 0 203 Run_Out_Cancel -O---- 100 100 000 - 0 240 Head_Flying_Hours -OSRCK 200 200 000 - 0 254 Free_Fall_Sensor -O--CK 100 100 000 - 333 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 51 Comprehensive SMART error log 0x03 GPL,SL R/O 64 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 2 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 1 Device vendor specific log 0xa2 GPL,SL VS 193 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 8086 hours (336 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 f9 39 13 4d 00 Error: ICRC, ABRT at LBA = 0x0df93913 = 234436883 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 08 00 00 0d f9 39 0c 4d 00 00:03:24.687 READ DMA EXT 25 03 03 00 08 00 00 0d f9 39 04 4d 00 00:03:24.671 READ DMA EXT 25 03 03 00 08 00 00 12 a1 9e 9c 42 00 00:03:24.669 READ DMA EXT 25 03 03 00 08 00 00 12 a1 9e 04 42 00 00:03:24.285 READ DMA EXT 25 03 03 00 08 00 00 00 00 18 00 40 00 00:00:23.868 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 20/25 Celsius Lifetime Min/Max Temperature: 12/43 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 478 (463) Index Estimated Time Temperature Celsius 464 2020-05-17 08:21 33 ************** ... ..(237 skipped). .. ************** 224 2020-05-17 12:19 33 ************** 225 2020-05-17 12:20 34 *************** ... ..( 4 skipped). .. *************** 230 2020-05-17 12:25 34 *************** 231 2020-05-17 12:26 35 **************** ... ..( 14 skipped). .. **************** 246 2020-05-17 12:41 35 **************** 247 2020-05-17 12:42 34 *************** ... ..( 10 skipped). .. *************** 258 2020-05-17 12:53 34 *************** 259 2020-05-17 12:54 33 ************** 260 2020-05-17 12:55 34 *************** 261 2020-05-17 12:56 34 *************** 262 2020-05-17 12:57 33 ************** 263 2020-05-17 12:58 34 *************** 264 2020-05-17 12:59 33 ************** 265 2020-05-17 13:00 34 *************** 266 2020-05-17 13:01 33 ************** ... ..( 37 skipped). .. ************** 304 2020-05-17 13:39 33 ************** 305 2020-05-17 13:40 34 *************** 306 2020-05-17 13:41 34 *************** 307 2020-05-17 13:42 35 **************** 308 2020-05-17 13:43 34 *************** ... ..( 23 skipped). .. *************** 332 2020-05-17 14:07 34 *************** 333 2020-05-17 14:08 33 ************** 334 2020-05-17 14:09 34 *************** ... ..( 11 skipped). .. *************** 346 2020-05-17 14:21 34 *************** 347 2020-05-17 14:22 33 ************** 348 2020-05-17 14:23 34 *************** 349 2020-05-17 14:24 33 ************** 350 2020-05-17 14:25 34 *************** ... ..( 2 skipped). .. *************** 353 2020-05-17 14:28 34 *************** 354 2020-05-17 14:29 ? - 355 2020-05-17 14:30 33 ************** 356 2020-05-17 14:31 33 ************** 357 2020-05-17 14:32 33 ************** 358 2020-05-17 14:33 34 *************** ... ..( 5 skipped). .. *************** 364 2020-05-17 14:39 34 *************** 365 2020-05-17 14:40 35 **************** 366 2020-05-17 14:41 35 **************** 367 2020-05-17 14:42 34 *************** ... ..( 4 skipped). .. *************** 372 2020-05-17 14:47 34 *************** 373 2020-05-17 14:48 35 **************** ... ..( 14 skipped). .. **************** 388 2020-05-17 15:03 35 **************** 389 2020-05-17 15:04 34 *************** 390 2020-05-17 15:05 34 *************** 391 2020-05-17 15:06 34 *************** 392 2020-05-17 15:07 33 ************** 393 2020-05-17 15:08 34 *************** 394 2020-05-17 15:09 33 ************** 395 2020-05-17 15:10 34 *************** 396 2020-05-17 15:11 33 ************** ... ..( 5 skipped). .. ************** 402 2020-05-17 15:17 33 ************** 403 2020-05-17 15:18 ? - 404 2020-05-17 15:19 32 ************* 405 2020-05-17 15:20 32 ************* 406 2020-05-17 15:21 32 ************* 407 2020-05-17 15:22 33 ************** 408 2020-05-17 15:23 ? - 409 2020-05-17 15:24 32 ************* 410 2020-05-17 15:25 32 ************* 411 2020-05-17 15:26 32 ************* 412 2020-05-17 15:27 ? - 413 2020-05-17 15:28 32 ************* ... ..( 5 skipped). .. ************* 419 2020-05-17 15:34 32 ************* 420 2020-05-17 15:35 33 ************** 421 2020-05-17 15:36 33 ************** 422 2020-05-17 15:37 33 ************** 423 2020-05-17 15:38 34 *************** 424 2020-05-17 15:39 35 **************** ... ..( 3 skipped). .. **************** 428 2020-05-17 15:43 35 **************** 429 2020-05-17 15:44 36 ***************** 430 2020-05-17 15:45 36 ***************** 431 2020-05-17 15:46 37 ****************** 432 2020-05-17 15:47 37 ****************** 433 2020-05-17 15:48 ? - 434 2020-05-17 15:49 34 *************** 435 2020-05-17 15:50 35 **************** 436 2020-05-17 15:51 34 *************** 437 2020-05-17 15:52 ? - 438 2020-05-17 15:53 33 ************** ... ..( 3 skipped). .. ************** 442 2020-05-17 15:57 33 ************** 443 2020-05-17 15:58 ? - 444 2020-05-17 15:59 32 ************* 445 2020-05-17 16:00 32 ************* 446 2020-05-17 16:01 33 ************** ... ..( 12 skipped). .. ************** 459 2020-05-17 16:14 33 ************** 460 2020-05-17 16:15 ? - 461 2020-05-17 16:16 21 ** 462 2020-05-17 16:17 ? - 463 2020-05-17 16:18 24 ***** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC