/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-8-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SAMSUNG MZVLB512HBJQ-000L2 Serial Number: -- Firmware Version: 3L1QEXF7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 512,110,190,592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Utilization: 156,908,371,968 [156 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Sat Sep 4 18:59:56 2021 CEST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.00W - - 0 0 0 0 0 0 1 + 6.30W - - 1 1 1 1 0 0 2 + 3.50W - - 2 2 2 2 0 0 3 - 0.0760W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 47 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 14,169,092 [7.25 TB] Data Units Written: 10,928,639 [5.59 TB] Host Read Commands: 406,568,607 Host Write Commands: 220,254,134 Controller Busy Time: 730 Power Cycles: 1,334 Power On Hours: 872 Unsafe Shutdowns: 39 Media and Data Integrity Errors: 0 Error Information Log Entries: 3,009 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 47 Celsius Temperature Sensor 2: 44 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-8-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST500LM012 HN-M500MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AR10002 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 1.5 Gb/s) Local Time is: Sat Sep 4 18:59:56 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 6360) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 106) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 091 091 025 - 2863 4 Start_Stop_Count -O--CK 099 099 000 - 1360 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 172 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 1 12 Power_Cycle_Count -O--CK 100 100 000 - 626 191 G-Sense_Error_Rate -O---K 252 252 000 - 0 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 064 000 - 31 (Min/Max 18/44) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 3187 223 Load_Retry_Count -O--CK 100 100 000 - 1 225 Load_Cycle_Count -O--CK 100 100 000 - 8827 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 23/31 Celsius Lifetime Min/Max Temperature: 16/44 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (12) Index Estimated Time Temperature Celsius 13 2021-09-04 08:20 31 ************ 14 2021-09-04 08:25 26 ******* 15 2021-09-04 08:30 27 ******** 16 2021-09-04 08:35 27 ******** 17 2021-09-04 08:40 28 ********* 18 2021-09-04 08:45 28 ********* 19 2021-09-04 08:50 28 ********* 20 2021-09-04 08:55 29 ********** ... ..( 5 skipped). .. ********** 26 2021-09-04 09:25 29 ********** 27 2021-09-04 09:30 21 ** 28 2021-09-04 09:35 23 **** 29 2021-09-04 09:40 24 ***** 30 2021-09-04 09:45 25 ****** 31 2021-09-04 09:50 26 ******* 32 2021-09-04 09:55 27 ******** 33 2021-09-04 10:00 27 ******** 34 2021-09-04 10:05 27 ******** 35 2021-09-04 10:10 28 ********* 36 2021-09-04 10:15 28 ********* 37 2021-09-04 10:20 28 ********* 38 2021-09-04 10:25 29 ********** ... ..( 4 skipped). .. ********** 43 2021-09-04 10:50 29 ********** 44 2021-09-04 10:55 21 ** 45 2021-09-04 11:00 23 **** 46 2021-09-04 11:05 24 ***** 47 2021-09-04 11:10 25 ****** 48 2021-09-04 11:15 26 ******* 49 2021-09-04 11:20 26 ******* 50 2021-09-04 11:25 27 ******** 51 2021-09-04 11:30 27 ******** 52 2021-09-04 11:35 28 ********* ... ..( 2 skipped). .. ********* 55 2021-09-04 11:50 28 ********* 56 2021-09-04 11:55 29 ********** ... ..( 7 skipped). .. ********** 64 2021-09-04 12:35 29 ********** 65 2021-09-04 12:40 30 *********** 66 2021-09-04 12:45 30 *********** 67 2021-09-04 12:50 27 ******** 68 2021-09-04 12:55 28 ********* 69 2021-09-04 13:00 29 ********** 70 2021-09-04 13:05 30 *********** 71 2021-09-04 13:10 30 *********** 72 2021-09-04 13:15 31 ************ ... ..( 2 skipped). .. ************ 75 2021-09-04 13:30 31 ************ 76 2021-09-04 13:35 32 ************* ... ..( 6 skipped). .. ************* 83 2021-09-04 14:10 32 ************* 84 2021-09-04 14:15 21 ** 85 2021-09-04 14:20 23 **** 86 2021-09-04 14:25 24 ***** 87 2021-09-04 14:30 25 ****** 88 2021-09-04 14:35 26 ******* 89 2021-09-04 14:40 27 ******** 90 2021-09-04 14:45 27 ******** 91 2021-09-04 14:50 28 ********* 92 2021-09-04 14:55 28 ********* 93 2021-09-04 15:00 28 ********* 94 2021-09-04 15:05 29 ********** ... ..( 5 skipped). .. ********** 100 2021-09-04 15:35 29 ********** 101 2021-09-04 15:40 30 *********** ... ..( 10 skipped). .. *********** 112 2021-09-04 16:35 30 *********** 113 2021-09-04 16:40 23 **** 114 2021-09-04 16:45 25 ****** 115 2021-09-04 16:50 26 ******* 116 2021-09-04 16:55 27 ******** 117 2021-09-04 17:00 28 ********* 118 2021-09-04 17:05 28 ********* 119 2021-09-04 17:10 29 ********** 120 2021-09-04 17:15 29 ********** 121 2021-09-04 17:20 30 *********** ... ..( 2 skipped). .. *********** 124 2021-09-04 17:35 30 *********** 125 2021-09-04 17:40 31 ************ ... ..( 3 skipped). .. ************ 1 2021-09-04 18:00 31 ************ 2 2021-09-04 18:05 24 ***** 3 2021-09-04 18:10 26 ******* 4 2021-09-04 18:15 27 ******** 5 2021-09-04 18:20 28 ********* 6 2021-09-04 18:25 29 ********** 7 2021-09-04 18:30 29 ********** 8 2021-09-04 18:35 30 *********** 9 2021-09-04 18:40 30 *********** 10 2021-09-04 18:45 30 *********** 11 2021-09-04 18:50 31 ************ 12 2021-09-04 18:55 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific