/dev/sda === START OF INFORMATION SECTION === Model Family: HGST Travelstar 5K1000 Device Model: HGST HTS541010A9E680 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JA0OA560 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Nov 27 11:56:15 2019 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x05) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 231) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 166 166 033 - 1 4 Start_Stop_Count -O--C- 096 096 000 - 6364 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 056 056 000 - 19411 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 5271 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 098 098 000 - 66053 193 Load_Cycle_Count -O--C- 050 050 000 - 507663 194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 4/62) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 290 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 290 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 290 [1] occurred at disk power-on lifetime: 7745 hours (322 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 31 00 00 0e a5 cd 8f 0e 00 Error: ICRC, ABRT at LBA = 0x0ea5cd8f = 245747087 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 70 00 48 00 00 0d aa 26 60 40 00 01:26:26.652 READ FPDMA QUEUED 60 01 00 00 40 00 00 0e a5 cc c0 40 00 01:26:26.636 READ FPDMA QUEUED 60 00 08 00 38 00 00 73 93 23 d8 40 00 01:26:26.636 READ FPDMA QUEUED 60 00 18 00 30 00 00 73 92 24 00 40 00 01:26:26.636 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:26:26.610 FLUSH CACHE EXT Error 289 [0] occurred at disk power-on lifetime: 7745 hours (322 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 38 00 00 41 d3 e1 70 01 00 Error: ICRC, ABRT at LBA = 0x41d3e170 = 1104404848 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 58 00 60 00 00 41 d3 e1 50 40 00 01:26:26.137 WRITE FPDMA QUEUED 60 00 18 00 58 00 00 73 9c 92 40 40 00 01:26:26.137 READ FPDMA QUEUED 60 00 40 00 50 00 00 73 98 08 80 40 00 01:26:26.137 READ FPDMA QUEUED 60 00 08 00 48 00 00 73 9e 23 e0 40 00 01:26:26.137 READ FPDMA QUEUED 61 00 08 00 40 00 00 2a 4e 10 48 40 00 01:26:26.137 WRITE FPDMA QUEUED Error 288 [3] occurred at disk power-on lifetime: 7745 hours (322 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 25 ce 1e 5f 05 00 Error: ICRC, ABRT at LBA = 0x25ce1e5f = 634265183 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 10 00 00 51 ce 10 20 40 00 01:26:25.793 WRITE FPDMA QUEUED 61 00 08 00 08 00 00 35 0e 11 d8 40 00 01:26:25.793 WRITE FPDMA QUEUED 61 00 08 00 00 00 00 2a 4e 10 48 40 00 01:26:25.793 WRITE FPDMA QUEUED 61 00 08 00 f0 00 00 25 ce 1e 58 40 00 01:26:25.793 WRITE FPDMA QUEUED 61 00 08 00 e8 00 00 25 ce 1c 78 40 00 01:26:25.793 WRITE FPDMA QUEUED Error 287 [2] occurred at disk power-on lifetime: 7745 hours (322 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 41 d3 de 87 01 00 Error: ICRC, ABRT at LBA = 0x41d3de87 = 1104404103 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 08 00 b8 00 00 41 d3 de 80 40 00 01:25:09.033 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:25:09.011 FLUSH CACHE EXT 61 00 18 00 a8 00 00 41 d3 de 68 40 00 01:25:09.011 WRITE FPDMA QUEUED 60 00 08 00 a0 00 00 73 89 58 f0 40 00 01:25:08.030 READ FPDMA QUEUED 60 00 08 00 98 00 00 73 89 55 10 40 00 01:25:08.030 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 13395 - # 2 Extended offline Aborted by host 90% 9328 - # 3 Short offline Completed without error 00% 9328 - # 4 Extended offline Completed without error 00% 4314 - # 5 Short offline Completed without error 00% 4308 - # 6 Short offline Completed without error 00% 631 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 17/38 Celsius Lifetime Min/Max Temperature: 4/62 Celsius Specified Max Operating Temperature: 39 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (60) Index Estimated Time Temperature Celsius 61 2019-11-27 09:49 35 **************** 62 2019-11-27 09:50 35 **************** 63 2019-11-27 09:51 35 **************** 64 2019-11-27 09:52 36 ***************** 65 2019-11-27 09:53 35 **************** 66 2019-11-27 09:54 36 ***************** 67 2019-11-27 09:55 35 **************** 68 2019-11-27 09:56 35 **************** 69 2019-11-27 09:57 36 ***************** ... ..( 11 skipped). .. ***************** 81 2019-11-27 10:09 36 ***************** 82 2019-11-27 10:10 37 ****************** 83 2019-11-27 10:11 36 ***************** ... ..( 3 skipped). .. ***************** 87 2019-11-27 10:15 36 ***************** 88 2019-11-27 10:16 37 ****************** ... ..( 25 skipped). .. ****************** 114 2019-11-27 10:42 37 ****************** 115 2019-11-27 10:43 36 ***************** 116 2019-11-27 10:44 36 ***************** 117 2019-11-27 10:45 37 ****************** 118 2019-11-27 10:46 36 ***************** ... ..( 2 skipped). .. ***************** 121 2019-11-27 10:49 36 ***************** 122 2019-11-27 10:50 37 ****************** 123 2019-11-27 10:51 36 ***************** ... ..( 6 skipped). .. ***************** 2 2019-11-27 10:58 36 ***************** 3 2019-11-27 10:59 37 ****************** 4 2019-11-27 11:00 36 ***************** 5 2019-11-27 11:01 36 ***************** 6 2019-11-27 11:02 37 ****************** ... ..( 29 skipped). .. ****************** 36 2019-11-27 11:32 37 ****************** 37 2019-11-27 11:33 38 ******************* 38 2019-11-27 11:34 37 ****************** ... ..( 9 skipped). .. ****************** 48 2019-11-27 11:44 37 ****************** 49 2019-11-27 11:45 38 ******************* 50 2019-11-27 11:46 38 ******************* 51 2019-11-27 11:47 37 ****************** 52 2019-11-27 11:48 37 ****************** 53 2019-11-27 11:49 38 ******************* 54 2019-11-27 11:50 37 ****************** 55 2019-11-27 11:51 37 ****************** 56 2019-11-27 11:52 38 ******************* ... ..( 3 skipped). .. ******************* 60 2019-11-27 11:56 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO mSATA 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT41B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: mSATA Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Nov 27 11:56:16 2019 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 6016 12 Power_Cycle_Count -O--CK 098 098 000 - 1549 177 Wear_Leveling_Count PO--C- 098 098 000 - 41 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 047 024 000 - 53 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 153 241 Total_LBAs_Written -O--CK 099 099 000 - 19429744685 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2720 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 53 Celsius Power Cycle Min/Max Temperature: 43/53 Celsius Lifetime Min/Max Temperature: 20/75 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (125) Index Estimated Time Temperature Celsius 126 2019-11-26 14:40 50 ******************************* ... ..( 10 skipped). .. ******************************* 9 2019-11-26 16:30 50 ******************************* 10 2019-11-26 16:40 51 ******************************** 11 2019-11-26 16:50 54 *********************************** 12 2019-11-26 17:00 53 ********************************** 13 2019-11-26 17:10 53 ********************************** 14 2019-11-26 17:20 55 ************************************ 15 2019-11-26 17:30 55 ************************************ 16 2019-11-26 17:40 ? - 17 2019-11-26 17:50 40 ********************* 18 2019-11-26 18:00 45 ************************** 19 2019-11-26 18:10 48 ***************************** 20 2019-11-26 18:20 49 ****************************** ... ..( 5 skipped). .. ****************************** 26 2019-11-26 19:20 49 ****************************** 27 2019-11-26 19:30 50 ******************************* ... ..( 5 skipped). .. ******************************* 33 2019-11-26 20:30 50 ******************************* 34 2019-11-26 20:40 51 ******************************** 35 2019-11-26 20:50 51 ******************************** 36 2019-11-26 21:00 ? - 37 2019-11-26 21:10 42 *********************** 38 2019-11-26 21:20 47 **************************** 39 2019-11-26 21:30 48 ***************************** 40 2019-11-26 21:40 50 ******************************* 41 2019-11-26 21:50 50 ******************************* 42 2019-11-26 22:00 51 ******************************** 43 2019-11-26 22:10 53 ********************************** 44 2019-11-26 22:20 53 ********************************** 45 2019-11-26 22:30 54 *********************************** 46 2019-11-26 22:40 54 *********************************** 47 2019-11-26 22:50 53 ********************************** 48 2019-11-26 23:00 54 *********************************** 49 2019-11-26 23:10 54 *********************************** 50 2019-11-26 23:20 54 *********************************** 51 2019-11-26 23:30 53 ********************************** 52 2019-11-26 23:40 53 ********************************** 53 2019-11-26 23:50 53 ********************************** 54 2019-11-27 00:00 54 *********************************** ... ..( 2 skipped). .. *********************************** 57 2019-11-27 00:30 54 *********************************** 58 2019-11-27 00:40 52 ********************************* 59 2019-11-27 00:50 51 ******************************** ... ..( 2 skipped). .. ******************************** 62 2019-11-27 01:20 51 ******************************** 63 2019-11-27 01:30 54 *********************************** 64 2019-11-27 01:40 54 *********************************** 65 2019-11-27 01:50 54 *********************************** 66 2019-11-27 02:00 53 ********************************** 67 2019-11-27 02:10 53 ********************************** 68 2019-11-27 02:20 56 ************************************* 69 2019-11-27 02:30 54 *********************************** 70 2019-11-27 02:40 53 ********************************** 71 2019-11-27 02:50 54 *********************************** 72 2019-11-27 03:00 53 ********************************** 73 2019-11-27 03:10 54 *********************************** 74 2019-11-27 03:20 53 ********************************** 75 2019-11-27 03:30 54 *********************************** 76 2019-11-27 03:40 54 *********************************** 77 2019-11-27 03:50 54 *********************************** 78 2019-11-27 04:00 53 ********************************** 79 2019-11-27 04:10 54 *********************************** 80 2019-11-27 04:20 53 ********************************** 81 2019-11-27 04:30 55 ************************************ 82 2019-11-27 04:40 55 ************************************ 83 2019-11-27 04:50 55 ************************************ 84 2019-11-27 05:00 54 *********************************** 85 2019-11-27 05:10 55 ************************************ 86 2019-11-27 05:20 57 ************************************** 87 2019-11-27 05:30 58 *************************************** 88 2019-11-27 05:40 55 ************************************ 89 2019-11-27 05:50 55 ************************************ 90 2019-11-27 06:00 54 *********************************** 91 2019-11-27 06:10 ? - 92 2019-11-27 06:20 41 ********************** 93 2019-11-27 06:30 47 **************************** 94 2019-11-27 06:40 49 ****************************** 95 2019-11-27 06:50 51 ******************************** 96 2019-11-27 07:00 52 ********************************* 97 2019-11-27 07:10 53 ********************************** 98 2019-11-27 07:20 52 ********************************* 99 2019-11-27 07:30 52 ********************************* 100 2019-11-27 07:40 53 ********************************** 101 2019-11-27 07:50 54 *********************************** 102 2019-11-27 08:00 53 ********************************** 103 2019-11-27 08:10 52 ********************************* 104 2019-11-27 08:20 51 ******************************** 105 2019-11-27 08:30 52 ********************************* 106 2019-11-27 08:40 53 ********************************** 107 2019-11-27 08:50 53 ********************************** 108 2019-11-27 09:00 53 ********************************** 109 2019-11-27 09:10 ? - 110 2019-11-27 09:20 43 ************************ 111 2019-11-27 09:30 47 **************************** 112 2019-11-27 09:40 49 ****************************** 113 2019-11-27 09:50 50 ******************************* 114 2019-11-27 10:00 51 ******************************** 115 2019-11-27 10:10 51 ******************************** 116 2019-11-27 10:20 52 ********************************* 117 2019-11-27 10:30 53 ********************************** 118 2019-11-27 10:40 52 ********************************* ... ..( 2 skipped). .. ********************************* 121 2019-11-27 11:10 52 ********************************* 122 2019-11-27 11:20 53 ********************************** ... ..( 2 skipped). .. ********************************** 125 2019-11-27 11:50 53 ********************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC