Probe #1a4ddf1c7f of Lenovo G580 20150

Log: smartctl

/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.10-1-ck] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SSDPR-CX300-120 Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: SBFM11.2 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Aug 5 02:06:56 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 14551 12 Power_Cycle_Count -O--C- 100 100 000 - 921 168 Unknown_Attribute -O--C- 100 100 000 - 0 170 Unknown_Attribute PO---- 087 087 010 - 131 173 Unknown_Attribute -O--C- 100 100 000 - 12779743 192 Power-Off_Retract_Count -O--C- 100 100 000 - 193 194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33) 218 Unknown_Attribute PO-R-- 100 100 050 - 0 231 Temperature_Celsius PO--C- 100 100 000 - 80 241 Total_LBAs_Written -O--C- 100 100 000 - 10706 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 13475 - # 2 Short offline Completed without error 00% 1338 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 921 --- Lifetime Power-On Resets 0x01 0x010 4 14551 --- Power-on Hours 0x01 0x018 6 22453181124 --- Logical Sectors Written 0x01 0x028 6 45159280920 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 33 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 19 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 238 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 6 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.10-1-ck] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Laptop HDD Device Model: ST500LT012-9WS142 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0001LVM1 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Aug 5 02:06:57 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 101) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 118 099 034 - 184263568 3 Spin_Up_Time PO---- 099 099 000 - 0 4 Start_Stop_Count -O--CK 095 095 020 - 5273 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 085 060 030 - 4639650997 9 Power_On_Hours -O--CK 062 062 000 - 33911 (69 206 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5165 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 2 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 073 037 045 Past 27 (1 50 35 26 0) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 136 192 Power-Off_Retract_Count -O--CK 100 100 000 - 103 193 Load_Cycle_Count -O--CK 007 007 000 - 187710 194 Temperature_Celsius -O---K 027 063 000 - 27 (0 15 0 0 0) 196 Reallocated_Event_Count POSR-- 073 073 030 - 23990 (5926 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbd-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 32837 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 26/35 Celsius Lifetime Min/Max Temperature: 15/63 Celsius Under/Over Temperature Limit Count: 0/453 Vendor specific: 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 11 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (127) Index Estimated Time Temperature Celsius 0 2020-08-04 02:42 35 **************** ... ..( 2 skipped). .. **************** 3 2020-08-04 03:15 35 **************** 4 2020-08-04 03:26 33 ************** 5 2020-08-04 03:37 32 ************* ... ..( 2 skipped). .. ************* 8 2020-08-04 04:10 32 ************* 9 2020-08-04 04:21 31 ************ ... ..( 3 skipped). .. ************ 13 2020-08-04 05:05 31 ************ 14 2020-08-04 05:16 33 ************** 15 2020-08-04 05:27 34 *************** 16 2020-08-04 05:38 32 ************* 17 2020-08-04 05:49 30 *********** 18 2020-08-04 06:00 32 ************* 19 2020-08-04 06:11 30 *********** 20 2020-08-04 06:22 29 ********** 21 2020-08-04 06:33 28 ********* 22 2020-08-04 06:44 28 ********* 23 2020-08-04 06:55 27 ******** ... ..( 7 skipped). .. ******** 31 2020-08-04 08:23 27 ******** 32 2020-08-04 08:34 29 ********** 33 2020-08-04 08:45 31 ************ 34 2020-08-04 08:56 32 ************* 35 2020-08-04 09:07 29 ********** 36 2020-08-04 09:18 28 ********* ... ..( 2 skipped). .. ********* 39 2020-08-04 09:51 28 ********* 40 2020-08-04 10:02 31 ************ 41 2020-08-04 10:13 32 ************* 42 2020-08-04 10:24 33 ************** 43 2020-08-04 10:35 33 ************** 44 2020-08-04 10:46 31 ************ 45 2020-08-04 10:57 29 ********** 46 2020-08-04 11:08 28 ********* ... ..( 29 skipped). .. ********* 76 2020-08-04 16:38 28 ********* 77 2020-08-04 16:49 29 ********** 78 2020-08-04 17:00 28 ********* ... ..( 2 skipped). .. ********* 81 2020-08-04 17:33 28 ********* 82 2020-08-04 17:44 30 *********** 83 2020-08-04 17:55 34 *************** 84 2020-08-04 18:06 32 ************* 85 2020-08-04 18:17 31 ************ 86 2020-08-04 18:28 33 ************** 87 2020-08-04 18:39 33 ************** 88 2020-08-04 18:50 33 ************** 89 2020-08-04 19:01 32 ************* 90 2020-08-04 19:12 30 *********** 91 2020-08-04 19:23 29 ********** 92 2020-08-04 19:34 29 ********** 93 2020-08-04 19:45 30 *********** 94 2020-08-04 19:56 29 ********** 95 2020-08-04 20:07 30 *********** 96 2020-08-04 20:18 30 *********** 97 2020-08-04 20:29 31 ************ 98 2020-08-04 20:40 30 *********** 99 2020-08-04 20:51 30 *********** 100 2020-08-04 21:02 29 ********** ... ..( 4 skipped). .. ********** 105 2020-08-04 21:57 29 ********** 106 2020-08-04 22:08 30 *********** 107 2020-08-04 22:19 30 *********** 108 2020-08-04 22:30 29 ********** 109 2020-08-04 22:41 31 ************ 110 2020-08-04 22:52 30 *********** ... ..( 2 skipped). .. *********** 113 2020-08-04 23:25 30 *********** 114 2020-08-04 23:36 29 ********** 115 2020-08-04 23:47 29 ********** 116 2020-08-04 23:58 28 ********* 117 2020-08-05 00:09 28 ********* 118 2020-08-05 00:20 28 ********* 119 2020-08-05 00:31 27 ******** ... ..( 7 skipped). .. ******** 127 2020-08-05 01:59 27 ******** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS


Hardware for Linux and BSD

GitHub