/dev/sda === START OF INFORMATION SECTION === Device Model: Samsung SSD 860 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT01B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 31 20:14:04 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 132 12 Power_Cycle_Count -O--CK 099 099 000 - 57 177 Wear_Leveling_Count PO--C- 099 099 000 - 3 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 068 056 000 - 32 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 1 241 Total_LBAs_Written -O--CK 099 099 000 - 1023873048 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce-0xcf SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 33/41 Celsius Lifetime Min/Max Temperature: 28/44 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (59) Index Estimated Time Temperature Celsius 60 2018-08-30 23:00 33 ************** 61 2018-08-30 23:10 40 ********************* 62 2018-08-30 23:20 42 *********************** 63 2018-08-30 23:30 41 ********************** 64 2018-08-30 23:40 42 *********************** 65 2018-08-30 23:50 38 ******************* 66 2018-08-31 00:00 36 ***************** 67 2018-08-31 00:10 39 ******************** 68 2018-08-31 00:20 40 ********************* 69 2018-08-31 00:30 39 ******************** 70 2018-08-31 00:40 39 ******************** 71 2018-08-31 00:50 33 ************** 72 2018-08-31 01:00 39 ******************** 73 2018-08-31 01:10 37 ****************** 74 2018-08-31 01:20 34 *************** 75 2018-08-31 01:30 41 ********************** 76 2018-08-31 01:40 40 ********************* 77 2018-08-31 01:50 41 ********************** 78 2018-08-31 02:00 ? - 79 2018-08-31 02:10 ? - 80 2018-08-31 02:20 31 ************ 81 2018-08-31 02:30 31 ************ 82 2018-08-31 02:40 31 ************ 83 2018-08-31 02:50 35 **************** 84 2018-08-31 03:00 39 ******************** ... ..( 2 skipped). .. ******************** 87 2018-08-31 03:30 39 ******************** 88 2018-08-31 03:40 36 ***************** 89 2018-08-31 03:50 34 *************** 90 2018-08-31 04:00 39 ******************** 91 2018-08-31 04:10 41 ********************** 92 2018-08-31 04:20 38 ******************* 93 2018-08-31 04:30 35 **************** 94 2018-08-31 04:40 36 ***************** 95 2018-08-31 04:50 41 ********************** 96 2018-08-31 05:00 37 ****************** 97 2018-08-31 05:10 39 ******************** 98 2018-08-31 05:20 39 ******************** 99 2018-08-31 05:30 38 ******************* 100 2018-08-31 05:40 34 *************** 101 2018-08-31 05:50 39 ******************** 102 2018-08-31 06:00 40 ********************* 103 2018-08-31 06:10 39 ******************** 104 2018-08-31 06:20 37 ****************** 105 2018-08-31 06:30 40 ********************* 106 2018-08-31 06:40 41 ********************** 107 2018-08-31 06:50 36 ***************** 108 2018-08-31 07:00 42 *********************** 109 2018-08-31 07:10 ? - 110 2018-08-31 07:20 34 *************** 111 2018-08-31 07:30 33 ************** 112 2018-08-31 07:40 35 **************** 113 2018-08-31 07:50 41 ********************** 114 2018-08-31 08:00 41 ********************** 115 2018-08-31 08:10 40 ********************* 116 2018-08-31 08:20 39 ******************** 117 2018-08-31 08:30 39 ******************** 118 2018-08-31 08:40 40 ********************* 119 2018-08-31 08:50 36 ***************** 120 2018-08-31 09:00 35 **************** 121 2018-08-31 09:10 36 ***************** 122 2018-08-31 09:20 38 ******************* 123 2018-08-31 09:30 36 ***************** 124 2018-08-31 09:40 36 ***************** 125 2018-08-31 09:50 36 ***************** 126 2018-08-31 10:00 41 ********************** 127 2018-08-31 10:10 41 ********************** 0 2018-08-31 10:20 41 ********************** 1 2018-08-31 10:30 42 *********************** 2 2018-08-31 10:40 41 ********************** 3 2018-08-31 10:50 40 ********************* 4 2018-08-31 11:00 42 *********************** 5 2018-08-31 11:10 42 *********************** 6 2018-08-31 11:20 ? - 7 2018-08-31 11:30 30 *********** 8 2018-08-31 11:40 31 ************ 9 2018-08-31 11:50 32 ************* ... ..( 11 skipped). .. ************* 21 2018-08-31 13:50 32 ************* 22 2018-08-31 14:00 40 ********************* 23 2018-08-31 14:10 41 ********************** 24 2018-08-31 14:20 40 ********************* 25 2018-08-31 14:30 39 ******************** 26 2018-08-31 14:40 40 ********************* 27 2018-08-31 14:50 41 ********************** 28 2018-08-31 15:00 ? - 29 2018-08-31 15:10 33 ************** 30 2018-08-31 15:20 ? - 31 2018-08-31 15:30 34 *************** 32 2018-08-31 15:40 37 ****************** 33 2018-08-31 15:50 39 ******************** 34 2018-08-31 16:00 33 ************** 35 2018-08-31 16:10 38 ******************* 36 2018-08-31 16:20 35 **************** 37 2018-08-31 16:30 36 ***************** 38 2018-08-31 16:40 39 ******************** 39 2018-08-31 16:50 32 ************* ... ..( 4 skipped). .. ************* 44 2018-08-31 17:40 32 ************* 45 2018-08-31 17:50 34 *************** 46 2018-08-31 18:00 39 ******************** 47 2018-08-31 18:10 39 ******************** 48 2018-08-31 18:20 41 ********************** 49 2018-08-31 18:30 36 ***************** 50 2018-08-31 18:40 ? - 51 2018-08-31 18:50 35 **************** 52 2018-08-31 19:00 36 ***************** 53 2018-08-31 19:10 34 *************** 54 2018-08-31 19:20 35 **************** 55 2018-08-31 19:30 39 ******************** 56 2018-08-31 19:40 41 ********************** 57 2018-08-31 19:50 40 ********************* 58 2018-08-31 20:00 40 ********************* 59 2018-08-31 20:10 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 57 --- Lifetime Power-On Resets 0x01 0x010 4 132 --- Power-on Hours 0x01 0x018 6 1023873048 --- Logical Sectors Written 0x01 0x020 6 12613785 --- Number of Write Commands 0x01 0x028 6 2430755680 --- Logical Sectors Read 0x01 0x030 6 29581109 --- Number of Read Commands 0x01 0x038 6 490000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 52 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x020 1 44 --- Highest Temperature 0x05 0x028 1 28 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 517 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb === START OF INFORMATION SECTION === Model Family: Intel 320 Series SSDs Device Model: INTEL SSDSA2CW120G3 Serial Number: -- LU WWN Device Id: 5 001517 ... Firmware Version: 4PC10362 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Aug 31 20:14:04 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0002 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 17) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 1) seconds. Offline data collection capabilities: (0x75) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time -----K 100 100 000 - 0 4 Start_Stop_Count ----CK 100 100 000 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 14227 12 Power_Cycle_Count -O--CK 100 100 000 - 5888 170 Reserve_Block_Count PO--CK 100 100 010 - 0 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 183 SATA_Downshift_Count ----CK 100 100 000 - 1 184 End-to-End_Error -O--CK 100 100 090 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 414 199 CRC_Error_Count ----CK 100 100 000 - 1 225 Host_Writes_32MiB -O--CK 100 100 000 - 415242 226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 10745548 227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 228 Workload_Minutes -O--CK 100 100 000 - 853656 232 Available_Reservd_Space PO--CK 100 100 010 - 0 233 Media_Wearout_Indicator -O--CK 098 098 000 - 0 241 Host_Writes_32MiB -O--CK 100 100 000 - 415242 242 Host_Reads_32MiB -O--CK 100 100 000 - 1000780 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Log Directories not read due to '-F nologdir' option SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 0 Device State: Stand-by (1) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 Read SCT Data Table failed: scsi error badly formed scsi parameters Read SCT Temperature History failed SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 5888 --- Lifetime Power-On Resets 0x01 0x010 4 14227 --- Power-on Hours 0x01 0x018 6 27213361108 --- Logical Sectors Written 0x01 0x020 6 454535381 --- Number of Write Commands 0x01 0x028 6 65587133929 --- Logical Sectors Read 0x01 0x030 6 979700254 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 31156 --- Number of Hardware Resets 0x06 0x010 4 458332 --- Number of ASR Events 0x06 0x018 4 1 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 10 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD30EZRX-00MMMB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 31 20:14:04 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (49980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 480) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 136 132 021 - 10191 4 Start_Stop_Count -O--CK 093 093 000 - 7008 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 081 081 000 - 14550 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5746 192 Power-Off_Retract_Count -O--CK 200 200 000 - 341 193 Load_Cycle_Count -O--CK 131 131 000 - 208333 194 Temperature_Celsius -O---K 116 106 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 181 000 - 792 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 27/37 Celsius Lifetime Min/Max Temperature: 0/46 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (393) Index Estimated Time Temperature Celsius 394 2018-08-31 12:17 36 ***************** ... ..( 33 skipped). .. ***************** 428 2018-08-31 12:51 36 ***************** 429 2018-08-31 12:52 37 ****************** 430 2018-08-31 12:53 36 ***************** ... ..( 4 skipped). .. ***************** 435 2018-08-31 12:58 36 ***************** 436 2018-08-31 12:59 37 ****************** 437 2018-08-31 13:00 36 ***************** ... ..( 2 skipped). .. ***************** 440 2018-08-31 13:03 36 ***************** 441 2018-08-31 13:04 37 ****************** 442 2018-08-31 13:05 37 ****************** 443 2018-08-31 13:06 36 ***************** ... ..( 3 skipped). .. ***************** 447 2018-08-31 13:10 36 ***************** 448 2018-08-31 13:11 37 ****************** 449 2018-08-31 13:12 36 ***************** 450 2018-08-31 13:13 37 ****************** 451 2018-08-31 13:14 36 ***************** 452 2018-08-31 13:15 36 ***************** 453 2018-08-31 13:16 36 ***************** 454 2018-08-31 13:17 37 ****************** 455 2018-08-31 13:18 36 ***************** 456 2018-08-31 13:19 37 ****************** 457 2018-08-31 13:20 36 ***************** 458 2018-08-31 13:21 36 ***************** 459 2018-08-31 13:22 37 ****************** ... ..( 6 skipped). .. ****************** 466 2018-08-31 13:29 37 ****************** 467 2018-08-31 13:30 ? - 468 2018-08-31 13:31 27 ******** ... ..( 2 skipped). .. ******** 471 2018-08-31 13:34 27 ******** 472 2018-08-31 13:35 28 ********* 473 2018-08-31 13:36 28 ********* 474 2018-08-31 13:37 29 ********** ... ..( 3 skipped). .. ********** 0 2018-08-31 13:41 29 ********** 1 2018-08-31 13:42 30 *********** 2 2018-08-31 13:43 31 ************ 3 2018-08-31 13:44 31 ************ 4 2018-08-31 13:45 32 ************* ... ..( 2 skipped). .. ************* 7 2018-08-31 13:48 32 ************* 8 2018-08-31 13:49 33 ************** ... ..( 4 skipped). .. ************** 13 2018-08-31 13:54 33 ************** 14 2018-08-31 13:55 34 *************** 15 2018-08-31 13:56 34 *************** 16 2018-08-31 13:57 34 *************** 17 2018-08-31 13:58 35 **************** ... ..( 4 skipped). .. **************** 22 2018-08-31 14:03 35 **************** 23 2018-08-31 14:04 36 ***************** ... ..( 4 skipped). .. ***************** 28 2018-08-31 14:09 36 ***************** 29 2018-08-31 14:10 37 ****************** ... ..( 10 skipped). .. ****************** 40 2018-08-31 14:21 37 ****************** 41 2018-08-31 14:22 36 ***************** ... ..( 8 skipped). .. ***************** 50 2018-08-31 14:31 36 ***************** 51 2018-08-31 14:32 37 ****************** 52 2018-08-31 14:33 36 ***************** ... ..( 34 skipped). .. ***************** 87 2018-08-31 15:08 36 ***************** 88 2018-08-31 15:09 35 **************** ... ..( 10 skipped). .. **************** 99 2018-08-31 15:20 35 **************** 100 2018-08-31 15:21 36 ***************** ... ..(110 skipped). .. ***************** 211 2018-08-31 17:12 36 ***************** 212 2018-08-31 17:13 37 ****************** 213 2018-08-31 17:14 36 ***************** ... ..( 3 skipped). .. ***************** 217 2018-08-31 17:18 36 ***************** 218 2018-08-31 17:19 37 ****************** 219 2018-08-31 17:20 36 ***************** ... ..( 45 skipped). .. ***************** 265 2018-08-31 18:06 36 ***************** 266 2018-08-31 18:07 ? - 267 2018-08-31 18:08 27 ******** 268 2018-08-31 18:09 27 ******** 269 2018-08-31 18:10 28 ********* 270 2018-08-31 18:11 28 ********* 271 2018-08-31 18:12 28 ********* 272 2018-08-31 18:13 29 ********** 273 2018-08-31 18:14 29 ********** 274 2018-08-31 18:15 29 ********** 275 2018-08-31 18:16 30 *********** 276 2018-08-31 18:17 30 *********** 277 2018-08-31 18:18 ? - 278 2018-08-31 18:19 26 ******* ... ..( 4 skipped). .. ******* 283 2018-08-31 18:24 26 ******* 284 2018-08-31 18:25 27 ******** 285 2018-08-31 18:26 27 ******** 286 2018-08-31 18:27 27 ******** 287 2018-08-31 18:28 28 ********* 288 2018-08-31 18:29 28 ********* 289 2018-08-31 18:30 29 ********** ... ..( 3 skipped). .. ********** 293 2018-08-31 18:34 29 ********** 294 2018-08-31 18:35 30 *********** ... ..( 2 skipped). .. *********** 297 2018-08-31 18:38 30 *********** 298 2018-08-31 18:39 31 ************ ... ..( 4 skipped). .. ************ 303 2018-08-31 18:44 31 ************ 304 2018-08-31 18:45 32 ************* 305 2018-08-31 18:46 32 ************* 306 2018-08-31 18:47 32 ************* 307 2018-08-31 18:48 33 ************** 308 2018-08-31 18:49 32 ************* 309 2018-08-31 18:50 33 ************** ... ..( 7 skipped). .. ************** 317 2018-08-31 18:58 33 ************** 318 2018-08-31 18:59 34 *************** ... ..( 3 skipped). .. *************** 322 2018-08-31 19:03 34 *************** 323 2018-08-31 19:04 35 **************** 324 2018-08-31 19:05 34 *************** ... ..( 17 skipped). .. *************** 342 2018-08-31 19:23 34 *************** 343 2018-08-31 19:24 35 **************** 344 2018-08-31 19:25 34 *************** 345 2018-08-31 19:26 34 *************** 346 2018-08-31 19:27 34 *************** 347 2018-08-31 19:28 35 **************** ... ..( 2 skipped). .. **************** 350 2018-08-31 19:31 35 **************** 351 2018-08-31 19:32 36 ***************** 352 2018-08-31 19:33 35 **************** 353 2018-08-31 19:34 35 **************** 354 2018-08-31 19:35 35 **************** 355 2018-08-31 19:36 36 ***************** 356 2018-08-31 19:37 35 **************** ... ..( 2 skipped). .. **************** 359 2018-08-31 19:40 35 **************** 360 2018-08-31 19:41 36 ***************** 361 2018-08-31 19:42 36 ***************** 362 2018-08-31 19:43 35 **************** ... ..( 8 skipped). .. **************** 371 2018-08-31 19:52 35 **************** 372 2018-08-31 19:53 36 ***************** ... ..( 2 skipped). .. ***************** 375 2018-08-31 19:56 36 ***************** 376 2018-08-31 19:57 35 **************** ... ..( 4 skipped). .. **************** 381 2018-08-31 20:02 35 **************** 382 2018-08-31 20:03 36 ***************** 383 2018-08-31 20:04 36 ***************** 384 2018-08-31 20:05 36 ***************** 385 2018-08-31 20:06 35 **************** ... ..( 3 skipped). .. **************** 389 2018-08-31 20:10 35 **************** 390 2018-08-31 20:11 36 ***************** ... ..( 2 skipped). .. ***************** 393 2018-08-31 20:14 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 5948 Vendor specific /dev/sdd === START OF INFORMATION SECTION === Device Model: TOSHIBA HDWA120 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MZ4OACF0 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5700 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 31 20:14:05 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (18103) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 302) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 141 141 054 - 95 3 Spin_Up_Time POS--- 127 127 024 - 274 (Average 273) 4 Start_Stop_Count -O--C- 100 100 000 - 3527 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 136 136 020 - 34 9 Power_On_Hours -O--C- 100 100 000 - 3915 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1339 192 Power-Off_Retract_Count -O--CK 097 097 000 - 3839 193 Load_Cycle_Count -O--C- 097 097 000 - 3839 194 Temperature_Celsius -O---- 171 171 000 - 35 (Min/Max 21/40) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 318 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 318 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 318 [1] occurred at disk power-on lifetime: 972 hours (40 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 60 00 00 00 5c 40 30 00 00 Error: ICRC, ABRT at LBA = 0x005c4030 = 6045744 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 60 00 00 00 5c 40 2f 40 ff 00:42:09.373 WRITE FPDMA QUEUED 61 01 00 00 48 00 00 00 5c 3e 90 40 00 00:42:09.372 WRITE FPDMA QUEUED 61 00 10 00 40 00 00 00 5a 42 a8 40 00 00:42:09.372 WRITE FPDMA QUEUED 61 01 00 00 38 00 00 00 5c 45 90 40 00 00:42:09.372 WRITE FPDMA QUEUED 61 01 00 00 30 00 00 00 5c 44 90 40 00 00:42:09.372 WRITE FPDMA QUEUED Error 317 [0] occurred at disk power-on lifetime: 972 hours (40 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 90 00 00 00 5c 40 00 00 00 Error: ICRC, ABRT at LBA = 0x005c4000 = 6045696 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 90 00 00 00 5c 3f ff 40 ff 00:42:09.228 WRITE FPDMA QUEUED 61 01 00 00 48 00 00 00 5c 3e 90 40 00 00:42:09.226 WRITE FPDMA QUEUED 61 00 10 00 40 00 00 00 5a 42 a8 40 00 00:42:09.226 WRITE FPDMA QUEUED 61 01 00 00 38 00 00 00 5c 45 90 40 00 00:42:09.226 WRITE FPDMA QUEUED 61 01 00 00 30 00 00 00 5c 44 90 40 00 00:42:09.226 WRITE FPDMA QUEUED Error 316 [3] occurred at disk power-on lifetime: 972 hours (40 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 90 00 00 00 5c 40 00 00 00 Error: ICRC, ABRT at LBA = 0x005c4000 = 6045696 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 90 00 00 00 5c 3f ff 40 ff 00:42:07.269 WRITE FPDMA QUEUED 61 01 00 00 40 00 00 00 5c 3e 90 40 00 00:42:07.268 WRITE FPDMA QUEUED 61 01 00 00 38 00 00 00 5c 45 90 40 00 00:42:07.268 WRITE FPDMA QUEUED 61 01 00 00 30 00 00 00 5c 44 90 40 00 00:42:07.268 WRITE FPDMA QUEUED 61 01 00 00 28 00 00 00 5c 43 90 40 00 00:42:07.268 WRITE FPDMA QUEUED Error 315 [2] occurred at disk power-on lifetime: 972 hours (40 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 70 00 00 00 5c 40 20 00 00 Error: ICRC, ABRT at LBA = 0x005c4020 = 6045728 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 01 00 00 70 00 00 00 5c 40 1f 40 ff 00:42:02.431 WRITE FPDMA QUEUED 61 01 00 00 48 00 00 00 5c 3e 90 40 00 00:42:02.430 WRITE FPDMA QUEUED 61 01 00 00 38 00 00 00 5c 45 90 40 00 00:42:02.430 WRITE FPDMA QUEUED 61 01 00 00 30 00 00 00 5c 44 90 40 00 00:42:02.430 WRITE FPDMA QUEUED 61 01 00 00 28 00 00 00 5c 43 90 40 00 00:42:02.430 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 27/38 Celsius Lifetime Min/Max Temperature: 21/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (8) Index Estimated Time Temperature Celsius 9 2018-08-31 18:07 37 ****************** ... ..( 11 skipped). .. ****************** 21 2018-08-31 18:19 37 ****************** 22 2018-08-31 18:20 38 ******************* ... ..( 7 skipped). .. ******************* 30 2018-08-31 18:28 38 ******************* 31 2018-08-31 18:29 37 ****************** 32 2018-08-31 18:30 37 ****************** 33 2018-08-31 18:31 37 ****************** 34 2018-08-31 18:32 36 ***************** 35 2018-08-31 18:33 36 ***************** 36 2018-08-31 18:34 36 ***************** 37 2018-08-31 18:35 ? - 38 2018-08-31 18:36 28 ********* 39 2018-08-31 18:37 28 ********* 40 2018-08-31 18:38 28 ********* 41 2018-08-31 18:39 29 ********** 42 2018-08-31 18:40 29 ********** 43 2018-08-31 18:41 29 ********** 44 2018-08-31 18:42 30 *********** ... ..( 2 skipped). .. *********** 47 2018-08-31 18:45 30 *********** 48 2018-08-31 18:46 31 ************ ... ..( 3 skipped). .. ************ 52 2018-08-31 18:50 31 ************ 53 2018-08-31 18:51 32 ************* 54 2018-08-31 18:52 32 ************* 55 2018-08-31 18:53 33 ************** 56 2018-08-31 18:54 33 ************** 57 2018-08-31 18:55 33 ************** 58 2018-08-31 18:56 34 *************** ... ..( 2 skipped). .. *************** 61 2018-08-31 18:59 34 *************** 62 2018-08-31 19:00 35 **************** ... ..( 2 skipped). .. **************** 65 2018-08-31 19:03 35 **************** 66 2018-08-31 19:04 36 ***************** ... ..( 20 skipped). .. ***************** 87 2018-08-31 19:25 36 ***************** 88 2018-08-31 19:26 37 ****************** ... ..( 3 skipped). .. ****************** 92 2018-08-31 19:30 37 ****************** 93 2018-08-31 19:31 38 ******************* 94 2018-08-31 19:32 38 ******************* 95 2018-08-31 19:33 37 ****************** 96 2018-08-31 19:34 37 ****************** 97 2018-08-31 19:35 37 ****************** 98 2018-08-31 19:36 36 ***************** ... ..( 3 skipped). .. ***************** 102 2018-08-31 19:40 36 ***************** 103 2018-08-31 19:41 35 **************** ... ..( 5 skipped). .. **************** 109 2018-08-31 19:47 35 **************** 110 2018-08-31 19:48 34 *************** ... ..( 19 skipped). .. *************** 2 2018-08-31 20:08 34 *************** 3 2018-08-31 20:09 35 **************** ... ..( 4 skipped). .. **************** 8 2018-08-31 20:14 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1339 --- Lifetime Power-On Resets 0x01 0x010 4 3915 --- Power-on Hours 0x01 0x018 6 10744685585 --- Logical Sectors Written 0x01 0x020 6 70113537 --- Number of Write Commands 0x01 0x028 6 9976933386 --- Logical Sectors Read 0x01 0x030 6 64073927 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 2908 --- Spindle Motor Power-on Hours 0x03 0x010 4 2908 --- Head Flying Hours 0x03 0x018 4 3839 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 6 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3704 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 34 N-- Average Short Term Temperature 0x05 0x018 1 34 N-- Average Long Term Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x030 1 35 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 34 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 52165 --- Number of Hardware Resets 0x06 0x010 4 50833 --- Number of ASR Events 0x06 0x018 4 318 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sde === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: Corsair Force 3 SSD Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: 5.05 User Capacity: 180,045,766,656 bytes [180 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 31 20:14:07 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 120 120 050 - 0/0 5 Retired_Block_Count PO--CK 100 100 003 - 0 9 Power_On_Hours_and_Msec -O--CK 086 086 000 - 13093h+53m+43.330s 12 Power_Cycle_Count -O--CK 100 100 000 - 996 171 Program_Fail_Count -O--CK 000 000 000 - 0 172 Erase_Fail_Count -O--CK 000 000 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 401 177 Wear_Range_Delta ------ 000 000 000 - 4 181 Program_Fail_Count -O--CK 000 000 000 - 0 182 Erase_Fail_Count -O--CK 000 000 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 030 030 000 - 30 (Min/Max 30/30) 195 ECC_Uncorr_Error_Count --SRC- 100 100 000 - 0/0 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 201 Unc_Soft_Read_Err_Rate --SRC- 100 100 000 - 0/0 204 Soft_ECC_Correct_Rate --SRC- 100 100 000 - 0/0 230 Life_Curve_Status PO--C- 100 100 000 - 100 231 SSD_Life_Left PO--C- 100 100 010 - 0 233 SandForce_Internal ------ 000 000 000 - 6745 234 SandForce_Internal -O--CK 000 000 000 - 7187 241 Lifetime_Writes_GiB -O--CK 000 000 000 - 7187 242 Lifetime_Reads_GiB -O--CK 000 000 000 - 17072 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 SL R/O 1 Device Statistics log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 30/30 Celsius Lifetime Min/Max Temperature: 30/30 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 478 (1) Index Estimated Time Temperature Celsius 2 2018-08-31 12:17 ? - ... ..(476 skipped). .. - 1 2018-08-31 20:14 ? - SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS