/dev/sda === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar P7K500 Device Model: Hitachi HDP725050GLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: GM4OA5CA User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Dec 22 13:58:42 2018 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7890) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 131) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 65536 2 Throughput_Performance P-S--- 132 132 054 - 140 3 Spin_Up_Time POS--- 116 116 024 - 332 (Average 330) 4 Start_Stop_Count -O--C- 100 100 000 - 3036 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 020 - 0 9 Power_On_Hours -O--C- 094 094 000 - 43191 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 3033 192 Power-Off_Retract_Count -O--CK 098 098 000 - 3186 193 Load_Cycle_Count -O--C- 098 098 000 - 3186 194 Temperature_Celsius -O---- 222 222 000 - 27 (Min/Max 12/44) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 12/27 Celsius Lifetime Min/Max Temperature: 12/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (58) Index Estimated Time Temperature Celsius 59 2018-12-22 11:51 30 *********** ... ..( 4 skipped). .. *********** 64 2018-12-22 11:56 30 *********** 65 2018-12-22 11:57 29 ********** 66 2018-12-22 11:58 30 *********** 67 2018-12-22 11:59 29 ********** 68 2018-12-22 12:00 30 *********** 69 2018-12-22 12:01 30 *********** 70 2018-12-22 12:02 30 *********** 71 2018-12-22 12:03 29 ********** ... ..( 2 skipped). .. ********** 74 2018-12-22 12:06 29 ********** 75 2018-12-22 12:07 30 *********** ... ..( 90 skipped). .. *********** 38 2018-12-22 13:38 30 *********** 39 2018-12-22 13:39 ? - 40 2018-12-22 13:40 13 - 41 2018-12-22 13:41 15 - 42 2018-12-22 13:42 16 - 43 2018-12-22 13:43 17 - 44 2018-12-22 13:44 18 - 45 2018-12-22 13:45 19 - 46 2018-12-22 13:46 20 * 47 2018-12-22 13:47 21 ** 48 2018-12-22 13:48 21 ** 49 2018-12-22 13:49 22 *** 50 2018-12-22 13:50 22 *** 51 2018-12-22 13:51 23 **** 52 2018-12-22 13:52 23 **** 53 2018-12-22 13:53 25 ****** 54 2018-12-22 13:54 25 ****** 55 2018-12-22 13:55 26 ******* 56 2018-12-22 13:56 26 ******* 57 2018-12-22 13:57 27 ******** 58 2018-12-22 13:58 27 ******** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 26 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Barracuda Green (AF) Device Model: ST1000DL002-9TT153 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC32 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Dec 22 13:58:44 2018 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 0 (vendor specific), recommended: 254 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 623) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 173) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b7) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 102 100 006 - 8 3 Spin_Up_Time PO---- 092 092 000 - 0 4 Start_Stop_Count -O--CK 098 098 020 - 2329 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 100 253 030 - 630433 9 Power_On_Hours -O--CK 063 063 000 - 33201 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 098 098 020 - 2328 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 4295032833 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 075 061 045 - 25 (Min/Max 16/25) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 91 193 Load_Cycle_Count -O--CK 099 099 000 - 2330 194 Temperature_Celsius -O---K 025 040 000 - 25 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 020 010 000 - 8 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 33381 (92 109 0) 241 Total_LBAs_Written ------ 100 253 000 - 357024765 242 Total_LBAs_Read ------ 100 253 000 - 3750978852 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 2819 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 16/25 Celsius Lifetime Min/Max Temperature: 16/39 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (126) Index Estimated Time Temperature Celsius 127 2018-12-17 08:44 30 *********** ... ..( 6 skipped). .. *********** 6 2018-12-17 15:37 30 *********** 7 2018-12-17 16:36 29 ********** ... ..( 2 skipped). .. ********** 10 2018-12-17 19:33 29 ********** 11 2018-12-17 20:32 30 *********** 12 2018-12-17 21:31 29 ********** 13 2018-12-17 22:30 30 *********** 14 2018-12-17 23:29 29 ********** 15 2018-12-18 00:28 29 ********** 16 2018-12-18 01:27 29 ********** 17 2018-12-18 02:26 30 *********** ... ..( 14 skipped). .. *********** 32 2018-12-18 17:11 30 *********** 33 2018-12-18 18:10 ? - 34 2018-12-18 19:09 22 *** 35 2018-12-18 20:08 22 *** 36 2018-12-18 21:07 29 ********** ... ..( 8 skipped). .. ********** 45 2018-12-19 05:58 29 ********** 46 2018-12-19 06:57 30 *********** 47 2018-12-19 07:56 30 *********** 48 2018-12-19 08:55 ? - 49 2018-12-19 09:54 21 ** 50 2018-12-19 10:53 21 ** 51 2018-12-19 11:52 29 ********** ... ..( 6 skipped). .. ********** 58 2018-12-19 18:45 29 ********** 59 2018-12-19 19:44 30 *********** 60 2018-12-19 20:43 29 ********** 61 2018-12-19 21:42 30 *********** 62 2018-12-19 22:41 29 ********** 63 2018-12-19 23:40 30 *********** 64 2018-12-20 00:39 ? - 65 2018-12-20 01:38 22 *** 66 2018-12-20 02:37 22 *** 67 2018-12-20 03:36 29 ********** 68 2018-12-20 04:35 29 ********** 69 2018-12-20 05:34 29 ********** 70 2018-12-20 06:33 30 *********** ... ..( 7 skipped). .. *********** 78 2018-12-20 14:25 30 *********** 79 2018-12-20 15:24 ? - 80 2018-12-20 16:23 22 *** 81 2018-12-20 17:22 22 *** 82 2018-12-20 18:21 30 *********** 83 2018-12-20 19:20 31 ************ ... ..( 8 skipped). .. ************ 92 2018-12-21 04:11 31 ************ 93 2018-12-21 05:10 32 ************* 94 2018-12-21 06:09 33 ************** 95 2018-12-21 07:08 32 ************* ... ..( 12 skipped). .. ************* 108 2018-12-21 19:55 32 ************* 109 2018-12-21 20:54 30 *********** 110 2018-12-21 21:53 30 *********** 111 2018-12-21 22:52 30 *********** 112 2018-12-21 23:51 29 ********** ... ..( 10 skipped). .. ********** 123 2018-12-22 10:40 29 ********** 124 2018-12-22 11:39 ? - 125 2018-12-22 12:38 16 - 126 2018-12-22 13:37 16 - SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 27 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdc === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.C Device Model: Hitachi HDS721010CLA332 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP4OA39C User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Dec 22 13:58:44 2018 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10223) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 170) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 093 093 016 - 1376273 2 Throughput_Performance P-S--- 135 135 054 - 98 3 Spin_Up_Time POS--- 116 116 024 - 327 (Average 326) 4 Start_Stop_Count -O--C- 100 100 000 - 3060 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 1 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 130 130 020 - 35 9 Power_On_Hours -O--C- 094 094 000 - 43184 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 3032 192 Power-Off_Retract_Count -O--CK 097 097 000 - 4037 193 Load_Cycle_Count -O--C- 097 097 000 - 4037 194 Temperature_Celsius -O---- 240 240 000 - 25 (Min/Max 14/37) 196 Reallocated_Event_Count -O--CK 100 100 000 - 1 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 14/25 Celsius Lifetime Min/Max Temperature: 14/37 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (49) Index Estimated Time Temperature Celsius 50 2018-12-22 11:51 28 ********* ... ..( 5 skipped). .. ********* 56 2018-12-22 11:57 28 ********* 57 2018-12-22 11:58 27 ******** ... ..( 10 skipped). .. ******** 68 2018-12-22 12:09 27 ******** 69 2018-12-22 12:10 28 ********* 70 2018-12-22 12:11 28 ********* 71 2018-12-22 12:12 27 ******** ... ..( 13 skipped). .. ******** 85 2018-12-22 12:26 27 ******** 86 2018-12-22 12:27 28 ********* ... ..( 12 skipped). .. ********* 99 2018-12-22 12:40 28 ********* 100 2018-12-22 12:41 27 ******** ... ..( 7 skipped). .. ******** 108 2018-12-22 12:49 27 ******** 109 2018-12-22 12:50 28 ********* ... ..( 8 skipped). .. ********* 118 2018-12-22 12:59 28 ********* 119 2018-12-22 13:00 27 ******** ... ..( 8 skipped). .. ******** 0 2018-12-22 13:09 27 ******** 1 2018-12-22 13:10 28 ********* ... ..( 7 skipped). .. ********* 9 2018-12-22 13:18 28 ********* 10 2018-12-22 13:19 27 ******** ... ..( 5 skipped). .. ******** 16 2018-12-22 13:25 27 ******** 17 2018-12-22 13:26 28 ********* ... ..( 6 skipped). .. ********* 24 2018-12-22 13:33 28 ********* 25 2018-12-22 13:34 27 ******** ... ..( 4 skipped). .. ******** 30 2018-12-22 13:39 27 ******** 31 2018-12-22 13:40 ? - 32 2018-12-22 13:41 15 - 33 2018-12-22 13:42 16 - 34 2018-12-22 13:43 17 - 35 2018-12-22 13:44 18 - 36 2018-12-22 13:45 19 - 37 2018-12-22 13:46 20 * 38 2018-12-22 13:47 20 * 39 2018-12-22 13:48 21 ** 40 2018-12-22 13:49 21 ** 41 2018-12-22 13:50 22 *** 42 2018-12-22 13:51 22 *** 43 2018-12-22 13:52 22 *** 44 2018-12-22 13:53 23 **** 45 2018-12-22 13:54 24 ***** 46 2018-12-22 13:55 24 ***** 47 2018-12-22 13:56 24 ***** 48 2018-12-22 13:57 25 ****** 49 2018-12-22 13:58 25 ****** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3032 --- Lifetime Power-On Resets 0x01 0x010 4 43184 --- Power-on Hours 0x01 0x018 6 48450434425 --- Logical Sectors Written 0x01 0x020 6 48928131 --- Number of Write Commands 0x01 0x028 6 3219161919948 --- Logical Sectors Read 0x01 0x030 6 197182611 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 43089 --- Spindle Motor Power-on Hours 0x03 0x010 4 43089 --- Head Flying Hours 0x03 0x018 4 4037 --- Head Load Events 0x03 0x020 4 1 --- Number of Reallocated Logical Sectors 0x03 0x028 4 303 --- Read Recovery Attempts 0x03 0x030 4 4294967295 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 107 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 25 --- Current Temperature 0x05 0x010 1 28 N-- Average Short Term Temperature 0x05 0x018 1 27 N-- Average Long Term Temperature 0x05 0x020 1 37 --- Highest Temperature 0x05 0x028 1 14 --- Lowest Temperature 0x05 0x030 1 35 N-- Highest Average Short Term Temperature 0x05 0x038 1 0 N-- Lowest Average Short Term Temperature 0x05 0x040 1 33 N-- Highest Average Long Term Temperature 0x05 0x048 1 0 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 26769 --- Number of Hardware Resets 0x06 0x010 4 23763 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 26 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 27 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdd === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD5000AAKX-001CA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 15.01H15 User Capacity: 500,103,634,432 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Dec 22 13:58:46 2018 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 86) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 143 142 021 - 3825 4 Start_Stop_Count -O--CK 099 099 000 - 1334 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 058 058 000 - 31150 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1330 192 Power-Off_Retract_Count -O--CK 200 200 000 - 86 193 Load_Cycle_Count -O--CK 200 200 000 - 1247 194 Temperature_Celsius -O---K 118 105 000 - 25 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 91 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 15/25 Celsius Lifetime Min/Max Temperature: 0/38 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (332) Index Estimated Time Temperature Celsius 333 2018-12-22 06:01 30 *********** ... ..(428 skipped). .. *********** 284 2018-12-22 13:10 30 *********** 285 2018-12-22 13:11 ? - 286 2018-12-22 13:12 15 - 287 2018-12-22 13:13 17 - 288 2018-12-22 13:14 18 - 289 2018-12-22 13:15 19 - 290 2018-12-22 13:16 22 *** 291 2018-12-22 13:17 23 **** 292 2018-12-22 13:18 24 ***** 293 2018-12-22 13:19 25 ****** ... ..( 4 skipped). .. ****** 298 2018-12-22 13:24 25 ****** 299 2018-12-22 13:25 30 *********** ... ..( 32 skipped). .. *********** 332 2018-12-22 13:58 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 1143 Vendor specific /dev/sde === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT02B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Dec 22 13:58:46 2018 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 098 098 000 - 6510 12 Power_Cycle_Count -O--CK 099 099 000 - 773 177 Wear_Leveling_Count PO--C- 099 099 000 - 2 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 076 061 000 - 24 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 21 241 Total_LBAs_Written -O--CK 099 099 000 - 1431151968 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 21 Celsius Power Cycle Min/Max Temperature: 21/28 Celsius Lifetime Min/Max Temperature: 21/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (40) Index Estimated Time Temperature Celsius 41 2018-12-21 16:40 31 ************ ... ..( 4 skipped). .. ************ 46 2018-12-21 17:30 31 ************ 47 2018-12-21 17:40 32 ************* 48 2018-12-21 17:50 31 ************ 49 2018-12-21 18:00 32 ************* 50 2018-12-21 18:10 31 ************ ... ..( 2 skipped). .. ************ 53 2018-12-21 18:40 31 ************ 54 2018-12-21 18:50 32 ************* 55 2018-12-21 19:00 31 ************ ... ..( 2 skipped). .. ************ 58 2018-12-21 19:30 31 ************ 59 2018-12-21 19:40 32 ************* 60 2018-12-21 19:50 31 ************ ... ..( 12 skipped). .. ************ 73 2018-12-21 22:00 31 ************ 74 2018-12-21 22:10 30 *********** 75 2018-12-21 22:20 30 *********** 76 2018-12-21 22:30 30 *********** 77 2018-12-21 22:40 29 ********** ... ..( 10 skipped). .. ********** 88 2018-12-22 00:30 29 ********** 89 2018-12-22 00:40 28 ********* 90 2018-12-22 00:50 28 ********* 91 2018-12-22 01:00 29 ********** 92 2018-12-22 01:10 29 ********** 93 2018-12-22 01:20 28 ********* ... ..( 34 skipped). .. ********* 0 2018-12-22 07:10 28 ********* 1 2018-12-22 07:20 32 ************* 2 2018-12-22 07:30 28 ********* ... ..( 35 skipped). .. ********* 38 2018-12-22 13:30 28 ********* 39 2018-12-22 13:40 ? - 40 2018-12-22 13:50 21 ** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 17 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdf === START OF INFORMATION SECTION === Model Family: Maxtor DiamondMax 10 (ATA/133 and SATA/150) Device Model: Maxtor 6B300R0 Serial Number: -- Firmware Version: BAH41B70 User Capacity: 300,090,728,448 bytes [300 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Sat Dec 22 13:58:46 2018 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 192 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2343) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 119) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 3 Spin_Up_Time POS--K 178 178 063 - 18861 4 Start_Stop_Count -O--CK 253 253 000 - 1361 5 Reallocated_Sector_Ct PO--CK 253 253 063 - 0 6 Read_Channel_Margin P----- 253 253 100 - 0 7 Seek_Error_Rate -O-R-- 253 252 000 - 0 8 Seek_Time_Performance POS--K 250 244 187 - 62653 9 Power_On_Minutes -O--CK 219 219 000 - 62h+06m 10 Spin_Retry_Count PO-R-K 253 252 157 - 0 11 Calibration_Retry_Count PO-R-K 253 252 223 - 0 12 Power_Cycle_Count -O--CK 249 249 000 - 1609 192 Power-Off_Retract_Count -O--CK 253 253 000 - 0 193 Load_Cycle_Count -O--CK 253 253 000 - 0 194 Temperature_Celsius -O--CK 006 253 000 - 27 195 Hardware_ECC_Recovered -O-R-- 253 252 000 - 19421 196 Reallocated_Event_Count ---R-- 253 253 000 - 0 197 Current_Pending_Sector ---R-- 253 253 000 - 0 198 Offline_Uncorrectable ---R-- 253 253 000 - 0 199 UDMA_CRC_Error_Count ---R-- 199 199 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 253 252 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 252 000 - 0 202 Data_Address_Mark_Errs -O-R-- 253 252 000 - 0 203 Run_Out_Cancel PO-R-- 253 252 180 - 0 204 Soft_ECC_Correction -O-R-- 253 252 000 - 0 205 Thermal_Asperity_Rate -O-R-- 253 252 000 - 0 207 Spin_High_Current -O-R-K 253 252 000 - 0 208 Spin_Buzz -O-R-K 253 252 000 - 0 209 Offline_Seek_Performnce --S--K 241 241 000 - 149 210 Unknown_Attribute -O--CK 253 252 000 - 0 211 Unknown_Attribute -O--CK 253 252 000 - 0 212 Unknown_Attribute -O--CK 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error badly formed scsi parameters General Purpose Log Directory not supported SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdl === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device Model: ST3500820AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SD81 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Dec 22 13:58:47 2018 EST ==> WARNING: There are known problems with these drives, THIS DRIVE MAY OR MAY NOT BE AFFECTED, see the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/207951en http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=632758 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 642) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 118) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 112 099 006 - 47817509 3 Spin_Up_Time PO---- 093 081 000 - 0 4 Start_Stop_Count -O--CK 078 078 020 - 23330 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 7 Seek_Error_Rate POSR-- 077 060 030 - 57844979 9 Power_On_Hours -O--CK 100 011 000 - 586 10 Spin_Retry_Count PO--C- 100 100 097 - 70 12 Power_Cycle_Count -O--CK 100 100 020 - 163 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 064 044 045 Past 36 (Min/Max 25/52 #4) 194 Temperature_Celsius -O---K 036 056 000 - 36 (0 14 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 037 028 000 - 47817509 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2819 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 579 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 25/52 Celsius Lifetime Min/Max Temperature: 14/56 Celsius Under/Over Temperature Limit Count: 0/13240 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (6) Index Estimated Time Temperature Celsius 7 2018-12-22 11:51 41 ********************** 8 2018-12-22 11:52 42 *********************** ... ..( 5 skipped). .. *********************** 14 2018-12-22 11:58 42 *********************** 15 2018-12-22 11:59 43 ************************ ... ..( 7 skipped). .. ************************ 23 2018-12-22 12:07 43 ************************ 24 2018-12-22 12:08 44 ************************* ... ..( 6 skipped). .. ************************* 31 2018-12-22 12:15 44 ************************* 32 2018-12-22 12:16 45 ************************** ... ..( 7 skipped). .. ************************** 40 2018-12-22 12:24 45 ************************** 41 2018-12-22 12:25 33 ************** 42 2018-12-22 12:26 33 ************** 43 2018-12-22 12:27 34 *************** 44 2018-12-22 12:28 35 **************** 45 2018-12-22 12:29 35 **************** 46 2018-12-22 12:30 35 **************** 47 2018-12-22 12:31 36 ***************** 48 2018-12-22 12:32 36 ***************** 49 2018-12-22 12:33 36 ***************** 50 2018-12-22 12:34 37 ****************** 51 2018-12-22 12:35 37 ****************** 52 2018-12-22 12:36 38 ******************* ... ..( 2 skipped). .. ******************* 55 2018-12-22 12:39 38 ******************* 56 2018-12-22 12:40 39 ******************** 57 2018-12-22 12:41 39 ******************** 58 2018-12-22 12:42 39 ******************** 59 2018-12-22 12:43 40 ********************* ... ..( 2 skipped). .. ********************* 62 2018-12-22 12:46 40 ********************* 63 2018-12-22 12:47 41 ********************** ... ..( 4 skipped). .. ********************** 68 2018-12-22 12:52 41 ********************** 69 2018-12-22 12:53 42 *********************** ... ..( 4 skipped). .. *********************** 74 2018-12-22 12:58 42 *********************** 75 2018-12-22 12:59 43 ************************ ... ..( 7 skipped). .. ************************ 83 2018-12-22 13:07 43 ************************ 84 2018-12-22 13:08 44 ************************* ... ..( 7 skipped). .. ************************* 92 2018-12-22 13:16 44 ************************* 93 2018-12-22 13:17 45 ************************** ... ..( 20 skipped). .. ************************** 114 2018-12-22 13:38 45 ************************** 115 2018-12-22 13:39 30 *********** 116 2018-12-22 13:40 29 ********** 117 2018-12-22 13:41 29 ********** 118 2018-12-22 13:42 29 ********** 119 2018-12-22 13:43 30 *********** 120 2018-12-22 13:44 31 ************ 121 2018-12-22 13:45 31 ************ 122 2018-12-22 13:46 31 ************ 123 2018-12-22 13:47 32 ************* 124 2018-12-22 13:48 33 ************** 125 2018-12-22 13:49 33 ************** 126 2018-12-22 13:50 33 ************** 127 2018-12-22 13:51 34 *************** 0 2018-12-22 13:52 34 *************** 1 2018-12-22 13:53 34 *************** 2 2018-12-22 13:54 35 **************** 3 2018-12-22 13:55 35 **************** 4 2018-12-22 13:56 35 **************** 5 2018-12-22 13:57 36 ***************** 6 2018-12-22 13:58 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sg7 === START OF INFORMATION SECTION === Vendor: Marvell Product: 91xx Config Revision: 1.01 Device type: processor Local Time is: Sat Dec 22 13:58:47 2018 EST SMART support is: Unavailable - device lacks SMART capability. === START OF READ SMART DATA SECTION === Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported Device does not support Self Test logging