/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.9.16-1-MANJARO] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: INTEL SSDPEKNW512G8H Serial Number: -- Firmware Version: HPS0 PCI Vendor/Subsystem ID: 0x8086 IEEE OUI Identifier: 0x5cd2e4 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Formatted LBA Size: 512 Local Time is: Sun Jan 31 16:53:21 2021 +04 Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 32 Pages Warning Comp. Temp. Threshold: 77 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.50W - - 0 0 0 0 0 0 1 + 2.70W - - 1 1 1 1 0 0 2 + 2.00W - - 2 2 2 2 0 0 3 - 0.0250W - - 3 3 3 3 5000 5000 4 - 0.0040W - - 4 4 4 4 5000 9000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 31 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 2% Data Units Read: 5,847,449 [2.99 TB] Data Units Written: 12,153,291 [6.22 TB] Host Read Commands: 82,398,860 Host Write Commands: 577,073,260 Controller Busy Time: 2,570 Power Cycles: 950 Power On Hours: 2,291 Unsafe Shutdowns: 293 Media and Data Integrity Errors: 0 Error Information Log Entries: 5 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Thermal Temp. 1 Transition Count: 79 Thermal Temp. 1 Total Time: 517 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.9.16-1-MANJARO] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Elements / My Passport (USB, AF) Device Model: WDC WD10JMVW-11AJGS4 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jan 31 16:53:21 2021 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 190) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 135 131 021 - 4225 4 Start_Stop_Count -O--CK 098 098 000 - 2098 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 096 096 000 - 3445 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 426 192 Power-Off_Retract_Count -O--CK 200 200 000 - 152 193 Load_Cycle_Count -O--CK 190 190 000 - 32479 194 Temperature_Celsius -O---K 107 088 000 - 40 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 789 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 789 [20] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 08 00 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000800 = 2048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.819 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.817 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.814 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.811 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.808 READ DMA EXT Error 788 [19] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 08 00 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000800 = 2048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.817 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.814 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.811 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.808 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.592 READ DMA EXT Error 787 [18] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 08 00 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000800 = 2048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.814 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.811 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.808 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.592 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.589 READ DMA EXT Error 786 [17] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 08 00 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000800 = 2048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.811 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.808 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.592 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.589 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.587 READ DMA EXT Error 785 [16] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 08 00 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000800 = 2048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.808 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.592 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.589 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.587 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.585 READ DMA EXT Error 784 [15] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 08 00 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000800 = 2048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.592 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.589 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.587 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.585 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.577 READ DMA EXT Error 783 [14] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 08 00 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000800 = 2048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.589 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.587 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.585 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.577 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:13:42.303 READ DMA EXT Error 782 [13] occurred at disk power-on lifetime: 1146 hours (47 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 08 00 40 00 Device Fault; Error: ABRT 8 sectors at LBA = 0x00000800 = 2048 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.587 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.585 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:14:55.577 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:13:42.303 READ DMA EXT 25 00 00 00 08 00 00 00 00 08 00 40 00 00:13:42.188 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 31/42 Celsius Lifetime Min/Max Temperature: 21/59 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (79) Index Estimated Time Temperature Celsius 80 2021-01-31 14:46 39 ******************** ... ..( 28 skipped). .. ******************** 109 2021-01-31 15:15 39 ******************** 110 2021-01-31 15:16 38 ******************* 111 2021-01-31 15:17 39 ******************** 112 2021-01-31 15:18 38 ******************* ... ..( 24 skipped). .. ******************* 9 2021-01-31 15:43 38 ******************* 10 2021-01-31 15:44 39 ******************** ... ..( 13 skipped). .. ******************** 24 2021-01-31 15:58 39 ******************** 25 2021-01-31 15:59 38 ******************* ... ..( 5 skipped). .. ******************* 31 2021-01-31 16:05 38 ******************* 32 2021-01-31 16:06 39 ******************** ... ..( 29 skipped). .. ******************** 62 2021-01-31 16:36 39 ******************** 63 2021-01-31 16:37 40 ********************* ... ..( 15 skipped). .. ********************* 79 2021-01-31 16:53 40 ********************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 20 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 21 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 266402 Vendor specific