/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.6-desktop-1omv2390] (OpenMandriva Lx 7.3-3) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD3200BPVT-26JJ5T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Oct 13 13:18:34 2023 JST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 79) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 143 141 021 - 1816 4 Start_Stop_Count -O--CK 095 095 000 - 5737 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 090 090 000 - 7567 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5733 191 G-Sense_Error_Rate -O--CK 001 001 000 - 1001 192 Power-Off_Retract_Count -O--CK 200 200 000 - 81 193 Load_Cycle_Count -O--CK 001 001 000 - 935674 194 Temperature_Celsius -O---K 106 094 000 - 37 (Min/Max 37/38) 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 37/38 Celsius Lifetime Min/Max Temperature: 0/50 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (87) Index Estimated Time Temperature Celsius 88 2023-10-13 11:11 36 ***************** 89 2023-10-13 11:12 ? - 90 2023-10-13 11:13 36 ***************** 91 2023-10-13 11:14 36 ***************** 92 2023-10-13 11:15 37 ****************** ... ..( 2 skipped). .. ****************** 95 2023-10-13 11:18 37 ****************** 96 2023-10-13 11:19 38 ******************* ... ..( 2 skipped). .. ******************* 99 2023-10-13 11:22 38 ******************* 100 2023-10-13 11:23 39 ******************** 101 2023-10-13 11:24 39 ******************** 102 2023-10-13 11:25 39 ******************** 103 2023-10-13 11:26 ? - 104 2023-10-13 11:27 36 ***************** ... ..( 2 skipped). .. ***************** 107 2023-10-13 11:30 36 ***************** 108 2023-10-13 11:31 37 ****************** 109 2023-10-13 11:32 37 ****************** 110 2023-10-13 11:33 38 ******************* 111 2023-10-13 11:34 39 ******************** ... ..( 3 skipped). .. ******************** 115 2023-10-13 11:38 39 ******************** 116 2023-10-13 11:39 40 ********************* ... ..( 9 skipped). .. ********************* 126 2023-10-13 11:49 40 ********************* 127 2023-10-13 11:50 41 ********************** ... ..( 4 skipped). .. ********************** 4 2023-10-13 11:55 41 ********************** 5 2023-10-13 11:56 ? - 6 2023-10-13 11:57 38 ******************* 7 2023-10-13 11:58 38 ******************* 8 2023-10-13 11:59 38 ******************* 9 2023-10-13 12:00 ? - 10 2023-10-13 12:01 39 ******************** 11 2023-10-13 12:02 39 ******************** 12 2023-10-13 12:03 40 ********************* ... ..( 2 skipped). .. ********************* 15 2023-10-13 12:06 40 ********************* 16 2023-10-13 12:07 ? - 17 2023-10-13 12:08 26 ******* 18 2023-10-13 12:09 26 ******* 19 2023-10-13 12:10 ? - 20 2023-10-13 12:11 27 ******** 21 2023-10-13 12:12 ? - 22 2023-10-13 12:13 28 ********* 23 2023-10-13 12:14 29 ********** 24 2023-10-13 12:15 29 ********** 25 2023-10-13 12:16 30 *********** 26 2023-10-13 12:17 30 *********** 27 2023-10-13 12:18 31 ************ 28 2023-10-13 12:19 32 ************* 29 2023-10-13 12:20 33 ************** 30 2023-10-13 12:21 34 *************** 31 2023-10-13 12:22 35 **************** ... ..( 4 skipped). .. **************** 36 2023-10-13 12:27 35 **************** 37 2023-10-13 12:28 ? - 38 2023-10-13 12:29 36 ***************** 39 2023-10-13 12:30 ? - 40 2023-10-13 12:31 36 ***************** 41 2023-10-13 12:32 ? - 42 2023-10-13 12:33 36 ***************** ... ..( 6 skipped). .. ***************** 49 2023-10-13 12:40 36 ***************** 50 2023-10-13 12:41 37 ****************** ... ..( 5 skipped). .. ****************** 56 2023-10-13 12:47 37 ****************** 57 2023-10-13 12:48 ? - 58 2023-10-13 12:49 27 ******** 59 2023-10-13 12:50 ? - 60 2023-10-13 12:51 28 ********* 61 2023-10-13 12:52 ? - 62 2023-10-13 12:53 29 ********** 63 2023-10-13 12:54 ? - 64 2023-10-13 12:55 31 ************ 65 2023-10-13 12:56 ? - 66 2023-10-13 12:57 32 ************* ... ..( 2 skipped). .. ************* 69 2023-10-13 13:00 32 ************* 70 2023-10-13 13:01 33 ************** 71 2023-10-13 13:02 35 **************** ... ..( 2 skipped). .. **************** 74 2023-10-13 13:05 35 **************** 75 2023-10-13 13:06 36 ***************** 76 2023-10-13 13:07 36 ***************** 77 2023-10-13 13:08 37 ****************** 78 2023-10-13 13:09 37 ****************** 79 2023-10-13 13:10 ? - 80 2023-10-13 13:11 38 ******************* ... ..( 5 skipped). .. ******************* 86 2023-10-13 13:17 38 ******************* 87 2023-10-13 13:18 37 ****************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 484 Vendor specific