Probe #25c19fc3d2 of Gigabyte Z87X-UD3H-CF Desktop Computer (Z87X-UD3H)

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Constellation ES.3 Device Model: ST1000NM0033-9ZM173 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SN03 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Nov 8 21:07:39 2017 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 592) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 116) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 079 063 044 - 86129641 3 Spin_Up_Time PO---- 096 096 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1482 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 090 060 030 - 1083505169 9 Power_On_Hours -O--CK 085 085 000 - 13791 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1506 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 4295032835 189 High_Fly_Writes -O-RCK 099 099 000 - 1 190 Airflow_Temperature_Cel -O---K 065 057 045 - 35 (Min/Max 27/35) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 178 193 Load_Cycle_Count -O--CK 100 100 000 - 1619 194 Temperature_Celsius -O---K 035 043 000 - 35 (0 21 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 019 004 000 - 86129641 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL,SL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbd GPL VS 512 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc2 GPL,SL VS 50 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 9327 - # 2 Extended offline Interrupted (host reset) 00% 9116 - # 3 Extended offline Completed without error 00% 8666 - # 4 Extended offline Interrupted (host reset) 00% 7897 - # 5 Extended offline Interrupted (host reset) 00% 7589 - # 6 Extended offline Completed without error 00% 6063 - # 7 Extended offline Completed without error 00% 5928 - # 8 Extended offline Completed without error 00% 5836 - # 9 Extended offline Completed without error 00% 5735 - #10 Extended offline Completed without error 00% 5654 - #11 Extended offline Completed without error 00% 5567 - #12 Extended offline Completed without error 00% 5481 - #13 Extended offline Completed without error 00% 5383 - #14 Extended offline Completed without error 00% 5288 - #15 Extended offline Completed without error 00% 5179 - #16 Extended offline Completed without error 00% 5100 - #17 Extended offline Completed without error 00% 5018 - #18 Extended offline Completed without error 00% 4927 - #19 Extended offline Completed without error 00% 4843 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 27/35 Celsius Lifetime Min/Max Temperature: 21/43 Celsius Under/Over Temperature Limit Count: 0/8 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (121) Index Estimated Time Temperature Celsius 122 2017-11-07 23:50 34 *************** 123 2017-11-08 00:00 34 *************** 124 2017-11-08 00:10 34 *************** 125 2017-11-08 00:20 35 **************** ... ..( 16 skipped). .. **************** 14 2017-11-08 03:10 35 **************** 15 2017-11-08 03:20 34 *************** ... ..( 4 skipped). .. *************** 20 2017-11-08 04:10 34 *************** 21 2017-11-08 04:20 35 **************** ... ..( 4 skipped). .. **************** 26 2017-11-08 05:10 35 **************** 27 2017-11-08 05:20 ? - 28 2017-11-08 05:30 27 ******** 29 2017-11-08 05:40 ? - 30 2017-11-08 05:50 27 ******** 31 2017-11-08 06:00 31 ************ 32 2017-11-08 06:10 34 *************** 33 2017-11-08 06:20 35 **************** 34 2017-11-08 06:30 36 ***************** ... ..( 8 skipped). .. ***************** 43 2017-11-08 08:00 36 ***************** 44 2017-11-08 08:10 35 **************** 45 2017-11-08 08:20 34 *************** ... ..( 33 skipped). .. *************** 79 2017-11-08 14:00 34 *************** 80 2017-11-08 14:10 ? - 81 2017-11-08 14:20 27 ******** 82 2017-11-08 14:30 30 *********** 83 2017-11-08 14:40 34 *************** 84 2017-11-08 14:50 35 **************** 85 2017-11-08 15:00 36 ***************** ... ..( 5 skipped). .. ***************** 91 2017-11-08 16:00 36 ***************** 92 2017-11-08 16:10 35 **************** ... ..( 2 skipped). .. **************** 95 2017-11-08 16:40 35 **************** 96 2017-11-08 16:50 34 *************** ... ..( 15 skipped). .. *************** 112 2017-11-08 19:30 34 *************** 113 2017-11-08 19:40 ? - 114 2017-11-08 19:50 27 ******** 115 2017-11-08 20:00 30 *********** 116 2017-11-08 20:10 34 *************** 117 2017-11-08 20:20 35 **************** ... ..( 3 skipped). .. **************** 121 2017-11-08 21:00 35 **************** SCT Error Recovery Control: Read: 100 (10,0 seconds) Write: 100 (10,0 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.C Device Model: Hitachi HDS721050CLA362 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP2OA3MA User Capacity: 500 107 862 016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Nov 8 21:07:39 2017 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4861) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 81) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 136 136 054 - 95 3 Spin_Up_Time POS--- 117 117 024 - 197 (Average 196) 4 Start_Stop_Count -O--C- 100 100 000 - 2945 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 140 140 020 - 30 9 Power_On_Hours -O--C- 096 096 000 - 32400 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 2759 192 Power-Off_Retract_Count -O--CK 098 098 000 - 3068 193 Load_Cycle_Count -O--C- 098 098 000 - 3068 194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 21/44) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 4668 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 3748 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3748 [3] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 71 00 00 16 96 24 26 06 00 Error: ICRC, ABRT 369 sectors at LBA = 0x16962426 = 378938406 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 16 96 23 97 e6 00 4d+17:01:50.507 READ DMA EXT 25 00 00 02 00 00 00 16 96 21 97 e6 00 4d+17:01:50.412 READ DMA EXT 25 00 00 02 00 00 00 16 96 1f 97 e6 00 4d+17:01:50.294 READ DMA EXT 25 00 00 02 00 00 00 16 96 1d 97 e6 00 4d+17:01:50.122 READ DMA EXT 25 00 00 02 00 00 00 16 96 1b 97 e6 00 4d+17:01:49.978 READ DMA EXT Error 3747 [2] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 21 00 00 16 95 a9 6e 06 00 Error: ICRC, ABRT 289 sectors at LBA = 0x1695a96e = 378906990 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 16 95 a8 8f e6 00 4d+17:01:45.736 READ DMA EXT 25 00 00 02 00 00 00 16 95 a6 8f e6 00 4d+17:01:45.685 READ DMA EXT 25 00 00 02 00 00 00 16 95 a4 8f e6 00 4d+17:01:45.661 READ DMA EXT 25 00 00 02 00 00 00 16 95 a2 8f e6 00 4d+17:01:45.629 READ DMA EXT 25 00 00 04 00 00 00 16 95 9e 8f e6 00 4d+17:01:45.568 READ DMA EXT Error 3746 [1] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 f1 00 00 16 94 cd c6 06 00 Error: ICRC, ABRT 241 sectors at LBA = 0x1694cdc6 = 378850758 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 16 94 cc b7 e6 00 4d+17:01:38.879 READ DMA EXT 25 00 00 02 00 00 00 16 94 ca b7 e6 00 4d+17:01:38.815 READ DMA EXT 25 00 00 02 00 00 00 16 94 c8 b7 e6 00 4d+17:01:38.737 READ DMA EXT 25 00 00 02 00 00 00 16 94 c6 b7 e6 00 4d+17:01:38.638 READ DMA EXT 25 00 00 02 00 00 00 16 94 c4 b7 e6 00 4d+17:01:38.505 READ DMA EXT Error 3745 [0] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 71 00 00 16 94 95 46 06 00 Error: ICRC, ABRT 369 sectors at LBA = 0x16949546 = 378836294 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 16 94 94 b7 e6 00 4d+16:58:24.562 READ DMA EXT 25 00 00 02 00 00 00 16 94 92 b7 e6 00 4d+16:58:24.498 READ DMA EXT 25 00 00 02 00 00 00 16 94 90 b7 e6 00 4d+16:58:24.461 READ DMA EXT 25 00 00 02 00 00 00 16 94 8e b7 e6 00 4d+16:58:24.419 READ DMA EXT 25 00 00 02 00 00 00 16 94 8c b7 e6 00 4d+16:58:24.390 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 27247 - # 2 Extended offline Completed without error 00% 24643 - # 3 Extended offline Completed without error 00% 24508 - # 4 Extended offline Completed without error 00% 24416 - # 5 Extended offline Completed without error 00% 24315 - # 6 Extended offline Completed without error 00% 24234 - # 7 Extended offline Completed without error 00% 24147 - # 8 Extended offline Completed without error 00% 24060 - # 9 Extended offline Completed without error 00% 23962 - #10 Extended offline Completed without error 00% 23868 - #11 Extended offline Completed without error 00% 23759 - #12 Extended offline Completed without error 00% 23679 - #13 Extended offline Completed without error 00% 23598 - #14 Extended offline Completed without error 00% 23506 - #15 Extended offline Completed without error 00% 23422 - #16 Extended offline Completed without error 00% 23246 - #17 Extended offline Completed without error 00% 23142 - #18 Extended offline Completed without error 00% 23051 - #19 Extended offline Completed without error 00% 22945 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 26/38 Celsius Lifetime Min/Max Temperature: 21/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (125) Index Estimated Time Temperature Celsius 126 2017-11-08 19:00 36 ***************** ... ..( 27 skipped). .. ***************** 26 2017-11-08 19:28 36 ***************** 27 2017-11-08 19:29 37 ****************** ... ..( 6 skipped). .. ****************** 34 2017-11-08 19:36 37 ****************** 35 2017-11-08 19:37 36 ***************** 36 2017-11-08 19:38 36 ***************** 37 2017-11-08 19:39 37 ****************** ... ..( 2 skipped). .. ****************** 40 2017-11-08 19:42 37 ****************** 41 2017-11-08 19:43 36 ***************** 42 2017-11-08 19:44 36 ***************** 43 2017-11-08 19:45 37 ****************** 44 2017-11-08 19:46 36 ***************** 45 2017-11-08 19:47 36 ***************** 46 2017-11-08 19:48 37 ****************** ... ..( 2 skipped). .. ****************** 49 2017-11-08 19:51 37 ****************** 50 2017-11-08 19:52 ? - 51 2017-11-08 19:53 27 ******** 52 2017-11-08 19:54 27 ******** 53 2017-11-08 19:55 28 ********* 54 2017-11-08 19:56 29 ********** 55 2017-11-08 19:57 29 ********** 56 2017-11-08 19:58 30 *********** 57 2017-11-08 19:59 30 *********** 58 2017-11-08 20:00 30 *********** 59 2017-11-08 20:01 31 ************ 60 2017-11-08 20:02 31 ************ 61 2017-11-08 20:03 31 ************ 62 2017-11-08 20:04 32 ************* 63 2017-11-08 20:05 32 ************* 64 2017-11-08 20:06 32 ************* 65 2017-11-08 20:07 33 ************** ... ..( 3 skipped). .. ************** 69 2017-11-08 20:11 33 ************** 70 2017-11-08 20:12 34 *************** ... ..( 8 skipped). .. *************** 79 2017-11-08 20:21 34 *************** 80 2017-11-08 20:22 35 **************** 81 2017-11-08 20:23 35 **************** 82 2017-11-08 20:24 36 ***************** 83 2017-11-08 20:25 37 ****************** 84 2017-11-08 20:26 37 ****************** 85 2017-11-08 20:27 37 ****************** 86 2017-11-08 20:28 38 ******************* 87 2017-11-08 20:29 38 ******************* 88 2017-11-08 20:30 37 ****************** ... ..( 2 skipped). .. ****************** 91 2017-11-08 20:33 37 ****************** 92 2017-11-08 20:34 36 ***************** ... ..( 10 skipped). .. ***************** 103 2017-11-08 20:45 36 ***************** 104 2017-11-08 20:46 37 ****************** 105 2017-11-08 20:47 37 ****************** 106 2017-11-08 20:48 38 ******************* 107 2017-11-08 20:49 38 ******************* 108 2017-11-08 20:50 38 ******************* 109 2017-11-08 20:51 37 ****************** 110 2017-11-08 20:52 37 ****************** 111 2017-11-08 20:53 37 ****************** 112 2017-11-08 20:54 36 ***************** ... ..( 9 skipped). .. ***************** 122 2017-11-08 21:04 36 ***************** 123 2017-11-08 21:05 37 ****************** 124 2017-11-08 21:06 37 ****************** 125 2017-11-08 21:07 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2759 --- Lifetime Power-On Resets 0x01 0x010 4 32400 --- Power-on Hours 0x01 0x018 6 13486200675 --- Logical Sectors Written 0x01 0x020 6 273326597 --- Number of Write Commands 0x01 0x028 6 258989933985 --- Logical Sectors Read 0x01 0x030 6 152065399 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 32389 --- Spindle Motor Power-on Hours 0x03 0x010 4 32389 --- Head Flying Hours 0x03 0x018 4 3068 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 2 --- Read Recovery Attempts 0x03 0x030 4 2 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 3443 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 38 --- Current Temperature 0x05 0x010 1 35 N-- Average Short Term Temperature 0x05 0x018 1 35 N-- Average Long Term Temperature 0x05 0x020 1 44 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x030 1 40 N-- Highest Average Short Term Temperature 0x05 0x038 1 0 N-- Lowest Average Short Term Temperature 0x05 0x040 1 38 N-- Highest Average Long Term Temperature 0x05 0x048 1 0 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 50150 --- Number of Hardware Resets 0x06 0x010 4 22859 --- Number of ASR Events 0x06 0x018 4 4668 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc === START OF INFORMATION SECTION === Model Family: Plextor M3/M5/M6 Series SSDs Device Model: PLEXTOR PX-128M5Pro Serial Number: -- LU WWN Device Id: 0 250313 ... Add. Product Id: DC7020B0 Firmware Version: 1.06 User Capacity: 128 035 676 160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Nov 8 21:07:41 2017 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 10) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO---- 100 100 070 - 0 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0 9 Power_On_Hours -O---- 100 100 000 - 9637 12 Power_Cycle_Count -O---- 100 100 000 - 1386 177 Wear_Leveling_Count PO---- 100 100 000 - 33607 178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0 181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0 182 Erase_Fail_Count_Total PO---- 100 100 000 - 0 187 Reported_Uncorrect -O---- 100 100 000 - 0 192 Power-Off_Retract_Count PO---- 100 100 000 - 131 196 Reallocated_Event_Count PO---- 100 100 000 - 0 198 Offline_Uncorrectable PO---- 100 100 000 - 0 199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0 232 Available_Reservd_Space PO---- 100 100 010 - 0 241 Host_Writes_32MiB PO---- 100 100 000 - 102680 242 Host_Reads_32MiB PO---- 100 100 000 - 111153 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 0 SMART Log Directory Version 0 Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 1 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 0 No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 2586 - # 2 Extended offline Completed without error 00% 14617 - # 3 Extended offline Completed without error 00% 31767 - # 4 Extended offline Completed without error 00% 53773 - # 5 Extended offline Completed without error 00% 19213 - # 6 Extended offline Completed without error 00% 61452 - # 7 Extended offline Completed without error 00% 35596 - # 8 Extended offline Completed without error 00% 15116 - # 9 Extended offline Completed without error 00% 11531 - #10 Extended offline Completed without error 00% 53258 - #11 Extended offline Completed without error 00% 25610 - #12 Extended offline Completed without error 00% 5386 - #13 Extended offline Completed without error 00% 49929 - #14 Extended offline Completed without error 00% 26633 - #15 Extended offline Completed without error 00% 5385 - #16 Extended offline Completed without error 00% 25864 - #17 Extended offline Completed without error 00% 65287 - #18 Extended offline Completed without error 00% 41991 - #19 Extended offline Completed without error 00% 14855 - Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (0) Index Estimated Time Temperature Celsius 1 2017-11-08 19:00 ? - ... ..(126 skipped). .. - 0 2017-11-08 21:07 ? - SCT Error Recovery Control: Read: 2 (0,2 seconds) Write: 2 (0,2 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdd === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.C Device Model: Hitachi HDS721010CLA332 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP4OA3MA User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Nov 8 21:07:41 2017 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9812) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 164) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 136 136 054 - 94 3 Spin_Up_Time POS--- 121 121 024 - 311 (Average 314) 4 Start_Stop_Count -O--C- 100 100 000 - 2213 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 1 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 138 138 020 - 31 9 Power_On_Hours -O--C- 097 097 000 - 24288 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 2213 192 Power-Off_Retract_Count -O--CK 099 099 000 - 2277 193 Load_Cycle_Count -O--C- 099 099 000 - 2277 194 Temperature_Celsius -O---- 162 162 000 - 37 (Min/Max 20/50) 196 Reallocated_Event_Count -O--CK 100 100 000 - 1 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 19137 - # 2 Extended offline Completed without error 00% 16533 - # 3 Extended offline Completed without error 00% 16397 - # 4 Extended offline Completed without error 00% 16306 - # 5 Extended offline Completed without error 00% 16204 - # 6 Extended offline Completed without error 00% 16123 - # 7 Extended offline Completed without error 00% 16037 - # 8 Extended offline Completed without error 00% 15950 - # 9 Extended offline Completed without error 00% 15852 - #10 Extended offline Completed without error 00% 15758 - #11 Extended offline Completed without error 00% 15649 - #12 Extended offline Completed without error 00% 15569 - #13 Extended offline Completed without error 00% 15488 - #14 Extended offline Completed without error 00% 15396 - #15 Extended offline Completed without error 00% 15312 - #16 Extended offline Completed without error 00% 15136 - #17 Extended offline Completed without error 00% 15032 - #18 Extended offline Completed without error 00% 14941 - #19 Extended offline Completed without error 00% 14835 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 26/37 Celsius Lifetime Min/Max Temperature: 20/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (77) Index Estimated Time Temperature Celsius 78 2017-11-08 19:00 36 ***************** ... ..( 2 skipped). .. ***************** 81 2017-11-08 19:03 36 ***************** 82 2017-11-08 19:04 37 ****************** ... ..( 3 skipped). .. ****************** 86 2017-11-08 19:08 37 ****************** 87 2017-11-08 19:09 36 ***************** ... ..( 13 skipped). .. ***************** 101 2017-11-08 19:23 36 ***************** 102 2017-11-08 19:24 37 ****************** ... ..( 4 skipped). .. ****************** 107 2017-11-08 19:29 37 ****************** 108 2017-11-08 19:30 36 ***************** ... ..( 12 skipped). .. ***************** 121 2017-11-08 19:43 36 ***************** 122 2017-11-08 19:44 37 ****************** ... ..( 4 skipped). .. ****************** 127 2017-11-08 19:49 37 ****************** 0 2017-11-08 19:50 36 ***************** 1 2017-11-08 19:51 36 ***************** 2 2017-11-08 19:52 ? - 3 2017-11-08 19:53 27 ******** 4 2017-11-08 19:54 28 ********* 5 2017-11-08 19:55 28 ********* 6 2017-11-08 19:56 28 ********* 7 2017-11-08 19:57 29 ********** 8 2017-11-08 19:58 29 ********** 9 2017-11-08 19:59 30 *********** 10 2017-11-08 20:00 30 *********** 11 2017-11-08 20:01 30 *********** 12 2017-11-08 20:02 31 ************ 13 2017-11-08 20:03 31 ************ 14 2017-11-08 20:04 31 ************ 15 2017-11-08 20:05 32 ************* ... ..( 2 skipped). .. ************* 18 2017-11-08 20:08 32 ************* 19 2017-11-08 20:09 33 ************** ... ..( 5 skipped). .. ************** 25 2017-11-08 20:15 33 ************** 26 2017-11-08 20:16 34 *************** ... ..( 6 skipped). .. *************** 33 2017-11-08 20:23 34 *************** 34 2017-11-08 20:24 35 **************** 35 2017-11-08 20:25 36 ***************** ... ..( 12 skipped). .. ***************** 48 2017-11-08 20:38 36 ***************** 49 2017-11-08 20:39 35 **************** ... ..( 4 skipped). .. **************** 54 2017-11-08 20:44 35 **************** 55 2017-11-08 20:45 36 ***************** 56 2017-11-08 20:46 36 ***************** 57 2017-11-08 20:47 37 ****************** 58 2017-11-08 20:48 37 ****************** 59 2017-11-08 20:49 37 ****************** 60 2017-11-08 20:50 36 ***************** ... ..( 14 skipped). .. ***************** 75 2017-11-08 21:05 36 ***************** 76 2017-11-08 21:06 37 ****************** 77 2017-11-08 21:07 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 2213 --- Lifetime Power-On Resets 0x01 0x010 4 24288 --- Power-on Hours 0x01 0x018 6 7148019752 --- Logical Sectors Written 0x01 0x020 6 16615695 --- Number of Write Commands 0x01 0x028 6 669337392298 --- Logical Sectors Read 0x01 0x030 6 62254101 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 24278 --- Spindle Motor Power-on Hours 0x03 0x010 4 24278 --- Head Flying Hours 0x03 0x018 4 2277 --- Head Load Events 0x03 0x020 4 1 --- Number of Reallocated Logical Sectors 0x03 0x028 4 5 --- Read Recovery Attempts 0x03 0x030 4 2 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1314 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 37 --- Current Temperature 0x05 0x010 1 35 N-- Average Short Term Temperature 0x05 0x018 1 35 N-- Average Long Term Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 20 --- Lowest Temperature 0x05 0x030 1 42 N-- Highest Average Short Term Temperature 0x05 0x038 1 0 N-- Lowest Average Short Term Temperature 0x05 0x040 1 41 N-- Highest Average Long Term Temperature 0x05 0x048 1 0 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 35578 --- Number of Hardware Resets 0x06 0x010 4 11327 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sde === START OF INFORMATION SECTION === Model Family: Western Digital Raptor Device Model: WDC WD740GD-00FLA1 Serial Number: -- Firmware Version: 27.08D27 User Capacity: 74 355 769 344 bytes [74,3 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 (minor revision not indicated) Local Time is: Wed Nov 8 21:07:42 2017 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Unknown SCT Status format version 1, should be 2 or 3. Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 246) Self-test routine in progress... 60% of test remaining. Total time to complete Offline data collection: ( 1719) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x001f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 200 200 051 - 0 3 Spin_Up_Time POS--- 113 112 021 - 4866 4 Start_Stop_Count -O--CK 095 095 040 - 5129 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate PO-R-- 200 200 051 - 0 9 Power_On_Hours -O--CK 023 023 000 - 56711 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count PO--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5128 194 Temperature_Celsius -O---K 113 106 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable -O--C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 1470 200 Multi_Zone_Error_Rate P--R-- 200 179 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error badly formed scsi parameters General Purpose Log Directory not supported SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 960 - # 2 Extended offline Completed without error 00% 827 - # 3 Extended offline Completed without error 00% 737 - # 4 Extended offline Completed without error 00% 637 - # 5 Extended offline Completed without error 00% 557 - # 6 Extended offline Completed without error 00% 472 - # 7 Extended offline Completed without error 00% 387 - # 8 Extended offline Completed without error 00% 291 - # 9 Extended offline Completed without error 00% 198 - #10 Extended offline Completed without error 00% 91 - #11 Extended offline Completed without error 00% 13 - #12 Extended offline Completed without error 00% 1026 - #13 Extended offline Completed without error 00% 936 - #14 Extended offline Completed without error 00% 853 - #15 Extended offline Completed without error 00% 679 - #16 Extended offline Completed without error 00% 578 - #17 Extended offline Completed without error 00% 488 - #18 Extended offline Completed without error 00% 384 - #19 Extended offline Completed without error 00% 296 - #20 Extended offline Completed without error 00% 158 - #21 Extended offline Completed without error 00% 1048 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Unknown SCT Status format version 1, should be 2 or 3. Unknown SCT Status format version 1, should be 2 or 3. SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdf === START OF INFORMATION SECTION === Model Family: Western Digital Raptor Device Model: WDC WD740GD-00FLA0 Serial Number: -- Firmware Version: 21.08U21 User Capacity: 74 355 769 344 bytes [74,3 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 (minor revision not indicated) Local Time is: Wed Nov 8 21:07:43 2017 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: ( 2385) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 200 200 051 - 0 3 Spin_Up_Time POS--- 069 067 021 - 5083 4 Start_Stop_Count -O--CK 095 095 040 - 5331 5 Reallocated_Sector_Ct PO--CK 199 199 140 - 5 7 Seek_Error_Rate PO-R-- 200 200 051 - 0 9 Power_On_Hours -O--CK 022 022 000 - 57480 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count PO--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5330 194 Temperature_Celsius -O---K 107 100 000 - 40 196 Reallocated_Event_Count -O--CK 199 199 000 - 1 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable -O--C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 253 000 - 208 200 Multi_Zone_Error_Rate P--R-- 200 179 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error badly formed scsi parameters General Purpose Log Directory not supported SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 636 - # 2 Extended offline Completed without error 00% 503 - # 3 Extended offline Completed without error 00% 413 - # 4 Extended offline Completed without error 00% 313 - # 5 Extended offline Completed without error 00% 233 - # 6 Extended offline Completed without error 00% 148 - # 7 Extended offline Completed without error 00% 63 - # 8 Extended offline Completed without error 00% 1059 - # 9 Extended offline Completed without error 00% 966 - #10 Extended offline Completed without error 00% 860 - #11 Extended offline Completed without error 00% 782 - #12 Extended offline Completed without error 00% 702 - #13 Extended offline Completed without error 00% 612 - #14 Extended offline Completed without error 00% 530 - #15 Extended offline Completed without error 00% 356 - #16 Extended offline Completed without error 00% 254 - #17 Extended offline Completed without error 00% 164 - #18 Extended offline Completed without error 00% 60 - #19 Extended offline Completed without error 00% 1065 - #20 Extended offline Completed without error 00% 927 - #21 Extended offline Completed without error 00% 724 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported


Hardware for Linux and BSD

GitHub