/dev/sda === START OF INFORMATION SECTION === Model Family: HGST Travelstar 5K1000 Device Model: HGST HTS541075A9E680 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JA2OA560 User Capacity: 750 156 374 016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Sep 24 15:57:16 2017 +06 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 1 (minimum power consumption with standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 196) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 238 238 033 - 1 4 Start_Stop_Count -O--C- 096 096 000 - 7741 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 081 081 000 - 8594 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 3701 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 090 090 000 - 2080 193 Load_Cycle_Count -O--C- 096 096 000 - 41103 194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 8/47) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 8588 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 20/32 Celsius Lifetime Min/Max Temperature: 8/47 Celsius Lifetime Average Temperature: 35 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (44) Index Estimated Time Temperature Celsius 45 2017-09-24 13:50 31 ************ ... ..( 6 skipped). .. ************ 52 2017-09-24 13:57 31 ************ 53 2017-09-24 13:58 32 ************* 54 2017-09-24 13:59 31 ************ 55 2017-09-24 14:00 31 ************ 56 2017-09-24 14:01 32 ************* ... ..( 25 skipped). .. ************* 82 2017-09-24 14:27 32 ************* 83 2017-09-24 14:28 33 ************** 84 2017-09-24 14:29 33 ************** 85 2017-09-24 14:30 32 ************* 86 2017-09-24 14:31 33 ************** 87 2017-09-24 14:32 32 ************* 88 2017-09-24 14:33 33 ************** ... ..( 7 skipped). .. ************** 96 2017-09-24 14:41 33 ************** 97 2017-09-24 14:42 ? - 98 2017-09-24 14:43 21 ** 99 2017-09-24 14:44 22 *** 100 2017-09-24 14:45 23 **** 101 2017-09-24 14:46 23 **** 102 2017-09-24 14:47 23 **** 103 2017-09-24 14:48 24 ***** 104 2017-09-24 14:49 24 ***** 105 2017-09-24 14:50 25 ****** 106 2017-09-24 14:51 25 ****** 107 2017-09-24 14:52 26 ******* 108 2017-09-24 14:53 26 ******* 109 2017-09-24 14:54 26 ******* 110 2017-09-24 14:55 27 ******** 111 2017-09-24 14:56 27 ******** 112 2017-09-24 14:57 28 ********* 113 2017-09-24 14:58 28 ********* 114 2017-09-24 14:59 28 ********* 115 2017-09-24 15:00 29 ********** ... ..( 4 skipped). .. ********** 120 2017-09-24 15:05 29 ********** 121 2017-09-24 15:06 30 *********** 122 2017-09-24 15:07 29 ********** 123 2017-09-24 15:08 30 *********** ... ..( 10 skipped). .. *********** 6 2017-09-24 15:19 30 *********** 7 2017-09-24 15:20 31 ************ 8 2017-09-24 15:21 30 *********** 9 2017-09-24 15:22 30 *********** 10 2017-09-24 15:23 31 ************ 11 2017-09-24 15:24 31 ************ 12 2017-09-24 15:25 31 ************ 13 2017-09-24 15:26 30 *********** 14 2017-09-24 15:27 31 ************ 15 2017-09-24 15:28 31 ************ 16 2017-09-24 15:29 30 *********** 17 2017-09-24 15:30 31 ************ ... ..( 15 skipped). .. ************ 33 2017-09-24 15:46 31 ************ 34 2017-09-24 15:47 32 ************* 35 2017-09-24 15:48 31 ************ ... ..( 8 skipped). .. ************ 44 2017-09-24 15:57 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS