/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.0.0] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD1600BEVT-22A23T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Oct 12 06:37:03 2022 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4080) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 51) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 2 3 Spin_Up_Time POS--K 154 130 021 - 1275 4 Start_Stop_Count -O--CK 089 089 000 - 11952 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 095 095 000 - 4327 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1930 191 G-Sense_Error_Rate -O--CK 001 001 000 - 1675 192 Power-Off_Retract_Count -O--CK 200 200 000 - 254 193 Load_Cycle_Count -O--CK 111 111 000 - 267806 194 Temperature_Celsius -O---K 104 085 000 - 39 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 2 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 [1] occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 01 da aa 55 40 00 Error: UNC at LBA = 0x01daaa55 = 31107669 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 a0 00 00 01 da aa 55 40 00 02:27:11.564 READ FPDMA QUEUED 60 00 01 00 98 00 00 01 da aa 54 40 00 02:27:11.564 READ FPDMA QUEUED 60 00 01 00 90 00 00 01 da aa 53 40 00 02:27:11.563 READ FPDMA QUEUED 60 00 01 00 88 00 00 01 da aa 52 40 00 02:27:11.563 READ FPDMA QUEUED 60 00 01 00 80 00 00 01 da aa 51 40 00 02:27:11.563 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 2454 hours (102 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 01 da aa 55 40 00 Error: UNC at LBA = 0x01daaa55 = 31107669 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 60 00 00 01 da ae 20 40 00 02:27:08.574 READ FPDMA QUEUED 60 01 00 00 58 00 00 01 da ad 20 40 00 02:27:08.574 READ FPDMA QUEUED 60 01 00 00 50 00 00 01 da ac 20 40 00 02:27:08.574 READ FPDMA QUEUED 60 01 00 00 48 00 00 01 da ab 20 40 00 02:27:08.574 READ FPDMA QUEUED 60 01 00 00 40 00 00 01 da aa 20 40 00 02:27:08.571 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 38/41 Celsius Lifetime Min/Max Temperature: 39/58 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (67) Index Estimated Time Temperature Celsius 68 2022-10-12 04:30 40 ********************* 69 2022-10-12 04:31 40 ********************* 70 2022-10-12 04:32 ? - 71 2022-10-12 04:33 40 ********************* 72 2022-10-12 04:34 40 ********************* 73 2022-10-12 04:35 ? - 74 2022-10-12 04:36 40 ********************* 75 2022-10-12 04:37 40 ********************* 76 2022-10-12 04:38 ? - 77 2022-10-12 04:39 40 ********************* 78 2022-10-12 04:40 40 ********************* 79 2022-10-12 04:41 40 ********************* 80 2022-10-12 04:42 ? - 81 2022-10-12 04:43 40 ********************* 82 2022-10-12 04:44 39 ******************** 83 2022-10-12 04:45 ? - 84 2022-10-12 04:46 40 ********************* 85 2022-10-12 04:47 39 ******************** 86 2022-10-12 04:48 ? - 87 2022-10-12 04:49 40 ********************* 88 2022-10-12 04:50 40 ********************* 89 2022-10-12 04:51 39 ******************** 90 2022-10-12 04:52 39 ******************** 91 2022-10-12 04:53 39 ******************** 92 2022-10-12 04:54 ? - 93 2022-10-12 04:55 39 ******************** 94 2022-10-12 04:56 39 ******************** 95 2022-10-12 04:57 ? - 96 2022-10-12 04:58 39 ******************** 97 2022-10-12 04:59 39 ******************** 98 2022-10-12 05:00 39 ******************** 99 2022-10-12 05:01 40 ********************* 100 2022-10-12 05:02 40 ********************* 101 2022-10-12 05:03 ? - 102 2022-10-12 05:04 40 ********************* 103 2022-10-12 05:05 40 ********************* 104 2022-10-12 05:06 ? - 105 2022-10-12 05:07 40 ********************* 106 2022-10-12 05:08 40 ********************* 107 2022-10-12 05:09 40 ********************* 108 2022-10-12 05:10 ? - 109 2022-10-12 05:11 40 ********************* 110 2022-10-12 05:12 39 ******************** 111 2022-10-12 05:13 ? - 112 2022-10-12 05:14 39 ******************** 113 2022-10-12 05:15 39 ******************** 114 2022-10-12 05:16 39 ******************** 115 2022-10-12 05:17 ? - 116 2022-10-12 05:18 39 ******************** 117 2022-10-12 05:19 39 ******************** 118 2022-10-12 05:20 ? - 119 2022-10-12 05:21 39 ******************** 120 2022-10-12 05:22 39 ******************** 121 2022-10-12 05:23 39 ******************** 122 2022-10-12 05:24 ? - 123 2022-10-12 05:25 39 ******************** ... ..( 2 skipped). .. ******************** 126 2022-10-12 05:28 39 ******************** 127 2022-10-12 05:29 40 ********************* 0 2022-10-12 05:30 ? - 1 2022-10-12 05:31 40 ********************* 2 2022-10-12 05:32 ? - 3 2022-10-12 05:33 40 ********************* 4 2022-10-12 05:34 ? - 5 2022-10-12 05:35 40 ********************* 6 2022-10-12 05:36 ? - 7 2022-10-12 05:37 40 ********************* 8 2022-10-12 05:38 ? - 9 2022-10-12 05:39 40 ********************* 10 2022-10-12 05:40 ? - 11 2022-10-12 05:41 40 ********************* ... ..( 3 skipped). .. ********************* 15 2022-10-12 05:45 40 ********************* 16 2022-10-12 05:46 39 ******************** ... ..( 2 skipped). .. ******************** 19 2022-10-12 05:49 39 ******************** 20 2022-10-12 05:50 38 ******************* ... ..( 3 skipped). .. ******************* 24 2022-10-12 05:54 38 ******************* 25 2022-10-12 05:55 ? - 26 2022-10-12 05:56 38 ******************* 27 2022-10-12 05:57 38 ******************* 28 2022-10-12 05:58 39 ******************** 29 2022-10-12 05:59 40 ********************* 30 2022-10-12 06:00 40 ********************* 31 2022-10-12 06:01 40 ********************* 32 2022-10-12 06:02 41 ********************** ... ..( 4 skipped). .. ********************** 37 2022-10-12 06:07 41 ********************** 38 2022-10-12 06:08 40 ********************* ... ..( 8 skipped). .. ********************* 47 2022-10-12 06:17 40 ********************* 48 2022-10-12 06:18 41 ********************** 49 2022-10-12 06:19 41 ********************** 50 2022-10-12 06:20 40 ********************* ... ..( 8 skipped). .. ********************* 59 2022-10-12 06:29 40 ********************* 60 2022-10-12 06:30 39 ******************** 61 2022-10-12 06:31 40 ********************* 62 2022-10-12 06:32 39 ******************** ... ..( 4 skipped). .. ******************** 67 2022-10-12 06:37 39 ******************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 3307 Vendor specific