Probe #3390d676c6 of Gigabyte GA-MA770-UD3 Desktop Computer

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-22MFCA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Mar 2 16:16:36 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11520) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 119) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 169 166 021 - 2533 4 Start_Stop_Count -O--CK 099 099 000 - 1788 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 099 099 000 - 876 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1787 192 Power-Off_Retract_Count -O--CK 200 200 000 - 164 193 Load_Cycle_Count -O--CK 200 200 000 - 1681 194 Temperature_Celsius -O---K 120 108 000 - 23 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 23 Celsius Power Cycle Min/Max Temperature: 22/23 Celsius Lifetime Min/Max Temperature: 13/35 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (283) Index Estimated Time Temperature Celsius 284 2020-03-02 08:19 26 ******* ... ..( 11 skipped). .. ******* 296 2020-03-02 08:31 26 ******* 297 2020-03-02 08:32 27 ******** ... ..( 25 skipped). .. ******** 323 2020-03-02 08:58 27 ******** 324 2020-03-02 08:59 ? - 325 2020-03-02 09:00 22 *** 326 2020-03-02 09:01 22 *** 327 2020-03-02 09:02 22 *** 328 2020-03-02 09:03 23 **** 329 2020-03-02 09:04 23 **** 330 2020-03-02 09:05 24 ***** 331 2020-03-02 09:06 24 ***** 332 2020-03-02 09:07 25 ****** 333 2020-03-02 09:08 ? - 334 2020-03-02 09:09 22 *** 335 2020-03-02 09:10 22 *** 336 2020-03-02 09:11 22 *** 337 2020-03-02 09:12 23 **** 338 2020-03-02 09:13 24 ***** 339 2020-03-02 09:14 24 ***** 340 2020-03-02 09:15 24 ***** 341 2020-03-02 09:16 25 ****** 342 2020-03-02 09:17 25 ****** 343 2020-03-02 09:18 25 ****** 344 2020-03-02 09:19 26 ******* ... ..( 5 skipped). .. ******* 350 2020-03-02 09:25 26 ******* 351 2020-03-02 09:26 27 ******** ... ..( 21 skipped). .. ******** 373 2020-03-02 09:48 27 ******** 374 2020-03-02 09:49 ? - 375 2020-03-02 09:50 21 ** 376 2020-03-02 09:51 21 ** 377 2020-03-02 09:52 21 ** 378 2020-03-02 09:53 22 *** 379 2020-03-02 09:54 23 **** 380 2020-03-02 09:55 23 **** 381 2020-03-02 09:56 24 ***** 382 2020-03-02 09:57 24 ***** 383 2020-03-02 09:58 24 ***** 384 2020-03-02 09:59 25 ****** 385 2020-03-02 10:00 ? - 386 2020-03-02 10:01 21 ** 387 2020-03-02 10:02 21 ** 388 2020-03-02 10:03 22 *** 389 2020-03-02 10:04 22 *** 390 2020-03-02 10:05 23 **** 391 2020-03-02 10:06 23 **** 392 2020-03-02 10:07 24 ***** 393 2020-03-02 10:08 ? - 394 2020-03-02 10:09 21 ** 395 2020-03-02 10:10 21 ** 396 2020-03-02 10:11 22 *** 397 2020-03-02 10:12 23 **** 398 2020-03-02 10:13 23 **** 399 2020-03-02 10:14 24 ***** 400 2020-03-02 10:15 24 ***** 401 2020-03-02 10:16 24 ***** 402 2020-03-02 10:17 25 ****** ... ..( 2 skipped). .. ****** 405 2020-03-02 10:20 25 ****** 406 2020-03-02 10:21 26 ******* ... ..( 10 skipped). .. ******* 417 2020-03-02 10:32 26 ******* 418 2020-03-02 10:33 ? - 419 2020-03-02 10:34 20 * 420 2020-03-02 10:35 20 * 421 2020-03-02 10:36 21 ** 422 2020-03-02 10:37 22 *** 423 2020-03-02 10:38 22 *** 424 2020-03-02 10:39 ? - 425 2020-03-02 10:40 23 **** 426 2020-03-02 10:41 23 **** 427 2020-03-02 10:42 23 **** 428 2020-03-02 10:43 24 ***** 429 2020-03-02 10:44 24 ***** 430 2020-03-02 10:45 24 ***** 431 2020-03-02 10:46 25 ****** ... ..( 3 skipped). .. ****** 435 2020-03-02 10:50 25 ****** 436 2020-03-02 10:51 26 ******* ... ..( 72 skipped). .. ******* 31 2020-03-02 12:04 26 ******* 32 2020-03-02 12:05 ? - 33 2020-03-02 12:06 23 **** 34 2020-03-02 12:07 23 **** 35 2020-03-02 12:08 24 ***** 36 2020-03-02 12:09 24 ***** 37 2020-03-02 12:10 24 ***** 38 2020-03-02 12:11 25 ****** 39 2020-03-02 12:12 25 ****** 40 2020-03-02 12:13 25 ****** 41 2020-03-02 12:14 26 ******* ... ..( 6 skipped). .. ******* 48 2020-03-02 12:21 26 ******* 49 2020-03-02 12:22 27 ******** ... ..( 27 skipped). .. ******** 77 2020-03-02 12:50 27 ******** 78 2020-03-02 12:51 ? - 79 2020-03-02 12:52 21 ** 80 2020-03-02 12:53 21 ** 81 2020-03-02 12:54 22 *** 82 2020-03-02 12:55 22 *** 83 2020-03-02 12:56 23 **** 84 2020-03-02 12:57 23 **** 85 2020-03-02 12:58 24 ***** 86 2020-03-02 12:59 24 ***** 87 2020-03-02 13:00 25 ****** ... ..( 2 skipped). .. ****** 90 2020-03-02 13:03 25 ****** 91 2020-03-02 13:04 26 ******* ... ..( 6 skipped). .. ******* 98 2020-03-02 13:11 26 ******* 99 2020-03-02 13:12 27 ******** ... ..(178 skipped). .. ******** 278 2020-03-02 16:11 27 ******** 279 2020-03-02 16:12 ? - 280 2020-03-02 16:13 22 *** 281 2020-03-02 16:14 22 *** 282 2020-03-02 16:15 22 *** 283 2020-03-02 16:16 23 **** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 250 Vendor specific


Hardware for Linux and BSD

GitHub