/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-40-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30003 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jul 19 19:22:58 2020 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13680) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 228) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 11 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 092 091 025 - 2658 4 Start_Stop_Count -O--CK 090 090 000 - 10991 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 19222 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 1 12 Power_Cycle_Count -O--CK 095 095 000 - 5104 13 Read_Soft_Error_Rate -O-RCK 100 100 000 - 0 181 Program_Fail_Cnt_Total -O---K 098 098 000 - 56520048 191 G-Sense_Error_Rate -O---K 100 100 000 - 13 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 193 Load_Cycle_Count -O--CK 085 085 000 - 153055 194 Temperature_Celsius -O---- 054 030 000 - 46 (Min/Max 16/70) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 278 240 Head_Flying_Hours -O--CK 100 100 000 - 15095 241 Total_LBAs_Written -O--CK 092 088 000 - 11637779 242 Total_LBAs_Read -O--CK 097 088 000 - 5098069 254 Free_Fall_Sensor -O--CK 252 252 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 32 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 32 [7] occurred at disk power-on lifetime: 2901 hours (120 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 00 00 00 00 27 c6 17 e0 00 Error: UNC at LBA = 0x0027c617 = 2606615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da 82 02 00 00 00 00 27 c6 17 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 17 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 17 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 17 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 42 da 82 00 01 00 00 00 27 c6 16 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT Error 31 [6] occurred at disk power-on lifetime: 2901 hours (120 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 00 00 00 00 27 c6 17 e0 00 Error: UNC at LBA = 0x0027c617 = 2606615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da 82 02 00 00 00 00 27 c6 17 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 17 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 17 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 42 da 82 00 01 00 00 00 27 c6 16 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 35 da 82 00 01 00 00 00 27 c6 16 e0 00 00:00:00.033 WRITE DMA EXT Error 30 [5] occurred at disk power-on lifetime: 2901 hours (120 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 00 00 00 00 27 c6 17 e0 00 Error: UNC at LBA = 0x0027c617 = 2606615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da 82 02 00 00 00 00 27 c6 17 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 17 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 42 da 82 00 01 00 00 00 27 c6 16 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 35 da 82 00 01 00 00 00 27 c6 16 e0 00 00:00:00.033 WRITE DMA EXT 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT Error 29 [4] occurred at disk power-on lifetime: 2901 hours (120 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 00 00 00 00 27 c6 17 e0 00 Error: UNC at LBA = 0x0027c617 = 2606615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da 82 02 00 00 00 00 27 c6 17 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 42 da 82 00 01 00 00 00 27 c6 16 e0 00 00:00:00.033 READ VERIFY SECTOR(S) EXT 35 da 82 00 01 00 00 00 27 c6 16 e0 00 00:00:00.033 WRITE DMA EXT 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT Error 28 [3] occurred at disk power-on lifetime: 2901 hours (120 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 00 00 00 00 27 c6 16 e0 00 Error: UNC at LBA = 0x0027c616 = 2606614 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 42 da 82 00 01 00 00 00 27 c6 15 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT Error 27 [2] occurred at disk power-on lifetime: 2901 hours (120 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 00 00 00 00 27 c6 16 e0 00 Error: UNC at LBA = 0x0027c616 = 2606614 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 42 da 82 00 01 00 00 00 27 c6 15 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 35 da 82 00 01 00 00 00 27 c6 15 e0 00 00:00:00.032 WRITE DMA EXT Error 26 [1] occurred at disk power-on lifetime: 2901 hours (120 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 00 00 00 00 27 c6 16 e0 00 Error: UNC at LBA = 0x0027c616 = 2606614 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 42 da 82 00 01 00 00 00 27 c6 15 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 35 da 82 00 01 00 00 00 27 c6 15 e0 00 00:00:00.032 WRITE DMA EXT 42 da 82 02 00 00 00 00 27 c6 15 e0 00 00:00:00.031 READ VERIFY SECTOR(S) EXT Error 25 [0] occurred at disk power-on lifetime: 2901 hours (120 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 02 00 00 00 00 27 c6 16 e0 00 Error: UNC at LBA = 0x0027c616 = 2606614 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 42 da 82 02 00 00 00 00 27 c6 16 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 42 da 82 00 01 00 00 00 27 c6 15 e0 00 00:00:00.032 READ VERIFY SECTOR(S) EXT 35 da 82 00 01 00 00 00 27 c6 15 e0 00 00:00:00.032 WRITE DMA EXT 42 da 82 02 00 00 00 00 27 c6 15 e0 00 00:00:00.031 READ VERIFY SECTOR(S) EXT 42 da 82 02 00 00 00 00 27 c6 15 e0 00 00:00:00.031 READ VERIFY SECTOR(S) EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 14946 - # 2 Short offline Completed without error 00% 13746 - # 3 Short offline Completed without error 00% 2905 - # 4 Short offline Completed without error 00% 2905 - # 5 Short offline Completed without error 00% 2905 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 46 Celsius Power Cycle Min/Max Temperature: 44/54 Celsius Lifetime Min/Max Temperature: 16/70 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (46) Index Estimated Time Temperature Celsius 47 2020-07-19 08:45 46 *************************** 48 2020-07-19 08:50 45 ************************** 49 2020-07-19 08:55 48 ***************************** 50 2020-07-19 09:00 50 ******************************* 51 2020-07-19 09:05 50 ******************************* 52 2020-07-19 09:10 51 ******************************** ... ..( 14 skipped). .. ******************************** 67 2020-07-19 10:25 51 ******************************** 68 2020-07-19 10:30 52 ********************************* 69 2020-07-19 10:35 52 ********************************* 70 2020-07-19 10:40 52 ********************************* 71 2020-07-19 10:45 51 ******************************** 72 2020-07-19 10:50 51 ******************************** 73 2020-07-19 10:55 50 ******************************* 74 2020-07-19 11:00 50 ******************************* 75 2020-07-19 11:05 50 ******************************* 76 2020-07-19 11:10 49 ****************************** 77 2020-07-19 11:15 49 ****************************** 78 2020-07-19 11:20 45 ************************** 79 2020-07-19 11:25 46 *************************** 80 2020-07-19 11:30 47 **************************** 81 2020-07-19 11:35 48 ***************************** 82 2020-07-19 11:40 50 ******************************* 83 2020-07-19 11:45 51 ******************************** 84 2020-07-19 11:50 52 ********************************* 85 2020-07-19 11:55 53 ********************************** 86 2020-07-19 12:00 54 *********************************** ... ..( 3 skipped). .. *********************************** 90 2020-07-19 12:20 54 *********************************** 91 2020-07-19 12:25 55 ************************************ ... ..( 3 skipped). .. ************************************ 95 2020-07-19 12:45 55 ************************************ 96 2020-07-19 12:50 56 ************************************* 97 2020-07-19 12:55 55 ************************************ ... ..( 3 skipped). .. ************************************ 101 2020-07-19 13:15 55 ************************************ 102 2020-07-19 13:20 54 *********************************** 103 2020-07-19 13:25 53 ********************************** 104 2020-07-19 13:30 53 ********************************** 105 2020-07-19 13:35 54 *********************************** 106 2020-07-19 13:40 54 *********************************** 107 2020-07-19 13:45 55 ************************************ 108 2020-07-19 13:50 56 ************************************* 109 2020-07-19 13:55 57 ************************************** 110 2020-07-19 14:00 58 *************************************** 111 2020-07-19 14:05 58 *************************************** 112 2020-07-19 14:10 57 ************************************** 113 2020-07-19 14:15 59 **************************************** 114 2020-07-19 14:20 60 ***************************************+ 115 2020-07-19 14:25 37 ****************** 116 2020-07-19 14:30 43 ************************ 117 2020-07-19 14:35 48 ***************************** 118 2020-07-19 14:40 52 ********************************* 119 2020-07-19 14:45 54 *********************************** 120 2020-07-19 14:50 56 ************************************* 121 2020-07-19 14:55 56 ************************************* 122 2020-07-19 15:00 56 ************************************* 123 2020-07-19 15:05 55 ************************************ 124 2020-07-19 15:10 55 ************************************ 125 2020-07-19 15:15 54 *********************************** 126 2020-07-19 15:20 53 ********************************** 127 2020-07-19 15:25 52 ********************************* 0 2020-07-19 15:30 51 ******************************** 1 2020-07-19 15:35 51 ******************************** 2 2020-07-19 15:40 51 ******************************** 3 2020-07-19 15:45 50 ******************************* 4 2020-07-19 15:50 50 ******************************* 5 2020-07-19 15:55 49 ****************************** 6 2020-07-19 16:00 49 ****************************** 7 2020-07-19 16:05 48 ***************************** 8 2020-07-19 16:10 49 ****************************** ... ..( 2 skipped). .. ****************************** 11 2020-07-19 16:25 49 ****************************** 12 2020-07-19 16:30 48 ***************************** 13 2020-07-19 16:35 48 ***************************** 14 2020-07-19 16:40 48 ***************************** 15 2020-07-19 16:45 29 ********** 16 2020-07-19 16:50 37 ****************** 17 2020-07-19 16:55 42 *********************** 18 2020-07-19 17:00 44 ************************* 19 2020-07-19 17:05 44 ************************* 20 2020-07-19 17:10 47 **************************** 21 2020-07-19 17:15 48 ***************************** 22 2020-07-19 17:20 48 ***************************** 23 2020-07-19 17:25 51 ******************************** 24 2020-07-19 17:30 52 ********************************* 25 2020-07-19 17:35 52 ********************************* 26 2020-07-19 17:40 53 ********************************** 27 2020-07-19 17:45 53 ********************************** 28 2020-07-19 17:50 55 ************************************ 29 2020-07-19 17:55 56 ************************************* 30 2020-07-19 18:00 56 ************************************* 31 2020-07-19 18:05 55 ************************************ ... ..( 5 skipped). .. ************************************ 37 2020-07-19 18:35 55 ************************************ 38 2020-07-19 18:40 59 **************************************** 39 2020-07-19 18:45 61 ***************************************+ 40 2020-07-19 18:50 61 ***************************************+ 41 2020-07-19 18:55 60 ***************************************+ 42 2020-07-19 19:00 58 *************************************** 43 2020-07-19 19:05 57 ************************************** 44 2020-07-19 19:10 44 ************************* 45 2020-07-19 19:15 45 ************************** 46 2020-07-19 19:20 46 *************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-40-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO mSATA 250GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT41B6Q User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: mSATA Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jul 19 19:22:59 2020 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Read SCT Status failed: scsi error badly formed scsi parameters Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 133) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 096 096 000 - 15366 12 Power_Cycle_Count -O--CK 097 097 000 - 3027 177 Wear_Leveling_Count PO--C- 094 094 000 - 123 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 061 036 000 - 39 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 117 241 Total_LBAs_Written -O--CK 099 099 000 - 46253437546 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 13019 - # 2 Short offline Completed without error 00% 11019 - # 3 Short offline Completed without error 00% 9761 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Read SCT Status failed: scsi error badly formed scsi parameters Read SCT Status failed: scsi error badly formed scsi parameters SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC