/dev/nvme0n1 smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.11.7-201.fsync.fc40.x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 980 PRO with Heatsink 2TB Serial Number: -- Firmware Version: 5B2QGXA7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 2,000,398,934,016 [2.00 TB] Unallocated NVM Capacity: 0 Controller ID: 6 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 2,000,398,934,016 [2.00 TB] Namespace 1 Utilization: 54,530,322,432 [54.5 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Mon Nov 11 07:48:55 2024 CET Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x0057): Comp Wr_Unc DS_Mngmt Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 82 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.49W - - 0 0 0 0 0 0 1 + 4.48W - - 1 1 1 1 0 200 2 + 3.18W - - 2 2 2 2 0 1000 3 - 0.0400W - - 3 3 3 3 2000 1200 4 - 0.0050W - - 4 4 4 4 500 9500 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 36 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 2% Data Units Read: 62,574,548 [32.0 TB] Data Units Written: 83,915,137 [42.9 TB] Host Read Commands: 587,607,744 Host Write Commands: 474,594,173 Controller Busy Time: 1,340 Power Cycles: 2,623 Power On Hours: 2,930 Unsafe Shutdowns: 342 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 36 Celsius Temperature Sensor 2: 37 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) No Errors Logged Read Self-test Log failed: Invalid Field in Command (0x002) /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.11.7-201.fsync.fc40.x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 870 EVO 1TB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: SVT02B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5528 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Nov 11 07:48:55 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 097 097 000 - 11677 12 Power_Cycle_Count -O--CK 095 095 000 - 4386 177 Wear_Leveling_Count PO--C- 097 097 000 - 55 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 076 052 000 - 24 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 687 241 Total_LBAs_Written -O--CK 099 099 000 - 69869265586 252 Unknown_Attribute -O--CK 100 100 000 - 250 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 21/40 Celsius Lifetime Min/Max Temperature: 13/48 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (17) Index Estimated Time Temperature Celsius 18 2024-11-10 10:30 ? - 19 2024-11-10 10:40 20 * 20 2024-11-10 10:50 21 ** 21 2024-11-10 11:00 23 **** 22 2024-11-10 11:10 28 ********* 23 2024-11-10 11:20 28 ********* 24 2024-11-10 11:30 23 **** 25 2024-11-10 11:40 22 *** ... ..( 6 skipped). .. *** 32 2024-11-10 12:50 22 *** 33 2024-11-10 13:00 ? - 34 2024-11-10 13:10 23 **** ... ..( 5 skipped). .. **** 40 2024-11-10 14:10 23 **** 41 2024-11-10 14:20 ? - 42 2024-11-10 14:30 23 **** 43 2024-11-10 14:40 22 *** ... ..( 2 skipped). .. *** 46 2024-11-10 15:10 22 *** 47 2024-11-10 15:20 21 ** ... ..( 2 skipped). .. ** 50 2024-11-10 15:50 21 ** 51 2024-11-10 16:00 20 * ... ..( 5 skipped). .. * 57 2024-11-10 17:00 20 * 58 2024-11-10 17:10 21 ** 59 2024-11-10 17:20 22 *** 60 2024-11-10 17:30 23 **** ... ..( 7 skipped). .. **** 68 2024-11-10 18:50 23 **** 69 2024-11-10 19:00 24 ***** 70 2024-11-10 19:10 32 ************* 71 2024-11-10 19:20 32 ************* 72 2024-11-10 19:30 31 ************ 73 2024-11-10 19:40 24 ***** 74 2024-11-10 19:50 22 *** 75 2024-11-10 20:00 22 *** 76 2024-11-10 20:10 21 ** 77 2024-11-10 20:20 ? - ... ..( 6 skipped). .. - 84 2024-11-10 21:30 ? - 85 2024-11-10 21:40 26 ******* 86 2024-11-10 21:50 26 ******* 87 2024-11-10 22:00 ? - 88 2024-11-10 22:10 26 ******* 89 2024-11-10 22:20 ? - 90 2024-11-10 22:30 26 ******* ... ..( 3 skipped). .. ******* 94 2024-11-10 23:10 26 ******* 95 2024-11-10 23:20 ? - 96 2024-11-10 23:30 ? - 97 2024-11-10 23:40 24 ***** 98 2024-11-10 23:50 24 ***** 99 2024-11-11 00:00 ? - 100 2024-11-11 00:10 23 **** ... ..( 2 skipped). .. **** 103 2024-11-11 00:40 23 **** 104 2024-11-11 00:50 22 *** 105 2024-11-11 01:00 22 *** 106 2024-11-11 01:10 23 **** 107 2024-11-11 01:20 ? - 108 2024-11-11 01:30 23 **** 109 2024-11-11 01:40 23 **** 110 2024-11-11 01:50 22 *** ... ..( 3 skipped). .. *** 114 2024-11-11 02:30 22 *** 115 2024-11-11 02:40 23 **** 116 2024-11-11 02:50 23 **** 117 2024-11-11 03:00 24 ***** 118 2024-11-11 03:10 22 *** 119 2024-11-11 03:20 22 *** 120 2024-11-11 03:30 ? - 121 2024-11-11 03:40 ? - 122 2024-11-11 03:50 26 ******* 123 2024-11-11 04:00 23 **** 124 2024-11-11 04:10 23 **** 125 2024-11-11 04:20 31 ************ 126 2024-11-11 04:30 24 ***** 127 2024-11-11 04:40 23 **** 0 2024-11-11 04:50 23 **** 1 2024-11-11 05:00 24 ***** 2 2024-11-11 05:10 25 ****** 3 2024-11-11 05:20 24 ***** 4 2024-11-11 05:30 23 **** ... ..( 2 skipped). .. **** 7 2024-11-11 06:00 23 **** 8 2024-11-11 06:10 22 *** 9 2024-11-11 06:20 22 *** 10 2024-11-11 06:30 22 *** 11 2024-11-11 06:40 21 ** 12 2024-11-11 06:50 21 ** 13 2024-11-11 07:00 ? - 14 2024-11-11 07:10 21 ** 15 2024-11-11 07:20 22 *** 16 2024-11-11 07:30 23 **** 17 2024-11-11 07:40 23 **** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 4386 --- Lifetime Power-On Resets 0x01 0x010 4 11677 --- Power-on Hours 0x01 0x018 6 69869265586 --- Logical Sectors Written 0x01 0x020 6 299160695 --- Number of Write Commands 0x01 0x028 6 84813826845 --- Logical Sectors Read 0x01 0x030 6 618162074 --- Number of Read Commands 0x01 0x038 6 3149000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 24 --- Current Temperature 0x05 0x020 1 48 --- Highest Temperature 0x05 0x028 1 13 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 21478 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.11.7-201.fsync.fc40.x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 850 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EMT02B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database 7.3/5528 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Nov 11 07:48:55 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 265) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 093 093 000 - 34570 12 Power_Cycle_Count -O--CK 091 091 000 - 8749 177 Wear_Leveling_Count PO--C- 092 092 000 - 151 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 099 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 076 049 000 - 24 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 235 POR_Recovery_Count -O--C- 099 099 000 - 1055 241 Total_LBAs_Written -O--CK 099 099 000 - 170893947496 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 22/24 Celsius Lifetime Min/Max Temperature: 15/51 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (121) Index Estimated Time Temperature Celsius 122 2024-11-10 10:30 ? - 123 2024-11-10 10:40 20 * 124 2024-11-10 10:50 21 ** 125 2024-11-10 11:00 22 *** 126 2024-11-10 11:10 23 **** ... ..( 9 skipped). .. **** 8 2024-11-10 12:50 23 **** 9 2024-11-10 13:00 ? - 10 2024-11-10 13:10 23 **** ... ..( 5 skipped). .. **** 16 2024-11-10 14:10 23 **** 17 2024-11-10 14:20 ? - 18 2024-11-10 14:30 23 **** ... ..( 3 skipped). .. **** 22 2024-11-10 15:10 23 **** 23 2024-11-10 15:20 22 *** 24 2024-11-10 15:30 22 *** 25 2024-11-10 15:40 21 ** ... ..( 8 skipped). .. ** 34 2024-11-10 17:10 21 ** 35 2024-11-10 17:20 23 **** ... ..( 3 skipped). .. **** 39 2024-11-10 18:00 23 **** 40 2024-11-10 18:10 24 ***** ... ..( 6 skipped). .. ***** 47 2024-11-10 19:20 24 ***** 48 2024-11-10 19:30 23 **** 49 2024-11-10 19:40 23 **** 50 2024-11-10 19:50 23 **** 51 2024-11-10 20:00 22 *** 52 2024-11-10 20:10 22 *** 53 2024-11-10 20:20 ? - ... ..( 6 skipped). .. - 60 2024-11-10 21:30 ? - 61 2024-11-10 21:40 27 ******** 62 2024-11-10 21:50 27 ******** 63 2024-11-10 22:00 ? - 64 2024-11-10 22:10 26 ******* 65 2024-11-10 22:20 ? - 66 2024-11-10 22:30 27 ******** ... ..( 2 skipped). .. ******** 69 2024-11-10 23:00 27 ******** 70 2024-11-10 23:10 26 ******* 71 2024-11-10 23:20 ? - 72 2024-11-10 23:30 ? - 73 2024-11-10 23:40 25 ****** 74 2024-11-10 23:50 25 ****** 75 2024-11-11 00:00 ? - 76 2024-11-11 00:10 24 ***** ... ..( 2 skipped). .. ***** 79 2024-11-11 00:40 24 ***** 80 2024-11-11 00:50 23 **** 81 2024-11-11 01:00 23 **** 82 2024-11-11 01:10 23 **** 83 2024-11-11 01:20 ? - 84 2024-11-11 01:30 24 ***** 85 2024-11-11 01:40 23 **** ... ..( 2 skipped). .. **** 88 2024-11-11 02:10 23 **** 89 2024-11-11 02:20 22 *** 90 2024-11-11 02:30 23 **** 91 2024-11-11 02:40 24 ***** 92 2024-11-11 02:50 24 ***** 93 2024-11-11 03:00 23 **** 94 2024-11-11 03:10 23 **** 95 2024-11-11 03:20 22 *** 96 2024-11-11 03:30 ? - 97 2024-11-11 03:40 ? - 98 2024-11-11 03:50 21 ** 99 2024-11-11 04:00 22 *** 100 2024-11-11 04:10 23 **** ... ..( 4 skipped). .. **** 105 2024-11-11 05:00 23 **** 106 2024-11-11 05:10 24 ***** 107 2024-11-11 05:20 24 ***** 108 2024-11-11 05:30 23 **** ... ..( 4 skipped). .. **** 113 2024-11-11 06:20 23 **** 114 2024-11-11 06:30 22 *** 115 2024-11-11 06:40 22 *** 116 2024-11-11 06:50 22 *** 117 2024-11-11 07:00 ? - 118 2024-11-11 07:10 22 *** 119 2024-11-11 07:20 23 **** 120 2024-11-11 07:30 24 ***** 121 2024-11-11 07:40 24 ***** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC