/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.74-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Apacer AS350 128GB Serial Number: -- Firmware Version: AP613PE0 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Aug 6 17:51:51 2022 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 9 Power_On_Hours -O--CK 100 100 000 - 9213 12 Power_Cycle_Count -O--CK 100 100 000 - 1494 163 Unknown_Attribute -O--CK 100 100 000 - 113 164 Unknown_Attribute -O--CK 100 100 000 - 85 166 Unknown_Attribute -O--CK 100 100 000 - 0 167 Unknown_Attribute -O--CK 100 100 000 - 0 168 Unknown_Attribute -O--CK 100 100 000 - 0 171 Unknown_Attribute -O--CK 100 100 000 - 0 172 Unknown_Attribute -O--CK 100 100 000 - 0 175 Program_Fail_Count_Chip -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 423 194 Temperature_Celsius -O---K 067 067 058 - 33 (Min/Max 33/33) 231 Unknown_SSD_Attribute -O--C- 100 100 000 - 97 241 Total_LBAs_Written -O--CK 100 100 000 - 9153599971 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1494 --- Lifetime Power-On Resets 0x01 0x010 4 9213 --- Power-on Hours 0x01 0x018 6 9153599971 --- Logical Sectors Written 0x01 0x028 6 11720679919 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 33 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 12552 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 20 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 21 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.74-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD10EZRX-00A8LB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,203,804,160 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Aug 6 17:51:51 2022 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12840) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 147) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 138 128 021 - 4058 4 Start_Stop_Count -O--CK 098 098 000 - 2972 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 092 092 000 - 5921 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1991 192 Power-Off_Retract_Count -O--CK 197 197 000 - 2463 193 Load_Cycle_Count -O--CK 195 195 000 - 17643 194 Temperature_Celsius -O---K 106 096 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 186 000 - 751 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 708 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 708 [3] occurred at disk power-on lifetime: 1056 hours (44 days + 0 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 01 00 00 00 2d 64 88 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- e0 00 00 00 01 00 00 00 2d 64 88 a0 00 2d+14:48:33.782 STANDBY IMMEDIATE ea 00 00 80 00 24 dd 40 00 00 00 e0 00 2d+14:48:33.781 FLUSH CACHE EXT b0 00 d0 00 00 00 00 00 c2 4f 00 e0 00 2d+14:28:30.445 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 e0 00 2d+14:28:30.379 SMART RETURN STATUS 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:26.351 READ SECTOR(S) EXT Error 707 [2] occurred at disk power-on lifetime: 1056 hours (44 days + 0 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 80 00 24 dd 40 00 00 00 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 80 00 24 dd 40 00 00 00 e0 00 2d+14:48:33.781 FLUSH CACHE EXT b0 00 d0 00 00 00 00 00 c2 4f 00 e0 00 2d+14:28:30.445 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 e0 00 2d+14:28:30.379 SMART RETURN STATUS 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:26.351 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:25.338 READ SECTOR(S) EXT Error 706 [1] occurred at disk power-on lifetime: 1055 hours (43 days + 23 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:26.351 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:25.338 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:24.325 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:23.312 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:22.299 READ SECTOR(S) EXT Error 705 [0] occurred at disk power-on lifetime: 1055 hours (43 days + 23 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:25.338 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:24.325 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:23.312 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:22.299 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:21.286 READ SECTOR(S) EXT Error 704 [23] occurred at disk power-on lifetime: 1055 hours (43 days + 23 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:24.325 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:23.312 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:22.299 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:21.286 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:20.273 READ SECTOR(S) EXT Error 703 [22] occurred at disk power-on lifetime: 1055 hours (43 days + 23 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:23.312 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:22.299 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:21.286 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:20.273 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:19.267 READ SECTOR(S) EXT Error 702 [21] occurred at disk power-on lifetime: 1055 hours (43 days + 23 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:22.299 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:21.286 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:20.273 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:19.267 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:18.262 READ SECTOR(S) EXT Error 701 [20] occurred at disk power-on lifetime: 1055 hours (43 days + 23 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:21.286 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:20.273 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:19.267 READ SECTOR(S) EXT 24 00 00 00 08 00 00 00 00 00 00 e0 00 2d+14:13:18.262 READ SECTOR(S) EXT 24 00 00 00 01 00 00 00 00 00 00 e0 00 2d+14:13:18.262 READ SECTOR(S) EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 36/38 Celsius Lifetime Min/Max Temperature: 14/47 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (111) Index Estimated Time Temperature Celsius 112 2022-08-06 09:54 36 ***************** ... ..( 9 skipped). .. ***************** 122 2022-08-06 10:04 36 ***************** 123 2022-08-06 10:05 35 **************** ... ..( 3 skipped). .. **************** 127 2022-08-06 10:09 35 **************** 128 2022-08-06 10:10 34 *************** ... ..( 3 skipped). .. *************** 132 2022-08-06 10:14 34 *************** 133 2022-08-06 10:15 ? - 134 2022-08-06 10:16 34 *************** ... ..( 7 skipped). .. *************** 142 2022-08-06 10:24 34 *************** 143 2022-08-06 10:25 35 **************** ... ..( 8 skipped). .. **************** 152 2022-08-06 10:34 35 **************** 153 2022-08-06 10:35 36 ***************** ... ..( 8 skipped). .. ***************** 162 2022-08-06 10:44 36 ***************** 163 2022-08-06 10:45 37 ****************** ... ..( 48 skipped). .. ****************** 212 2022-08-06 11:34 37 ****************** 213 2022-08-06 11:35 38 ******************* ... ..( 22 skipped). .. ******************* 236 2022-08-06 11:58 38 ******************* 237 2022-08-06 11:59 ? - 238 2022-08-06 12:00 38 ******************* 239 2022-08-06 12:01 38 ******************* 240 2022-08-06 12:02 38 ******************* 241 2022-08-06 12:03 37 ****************** ... ..( 7 skipped). .. ****************** 249 2022-08-06 12:11 37 ****************** 250 2022-08-06 12:12 36 ***************** ... ..( 23 skipped). .. ***************** 274 2022-08-06 12:36 36 ***************** 275 2022-08-06 12:37 37 ****************** ... ..( 85 skipped). .. ****************** 361 2022-08-06 14:03 37 ****************** 362 2022-08-06 14:04 29 ********** ... ..( 38 skipped). .. ********** 401 2022-08-06 14:43 29 ********** 402 2022-08-06 14:44 ? - 403 2022-08-06 14:45 30 *********** 404 2022-08-06 14:46 29 ********** 405 2022-08-06 14:47 29 ********** 406 2022-08-06 14:48 30 *********** ... ..( 3 skipped). .. *********** 410 2022-08-06 14:52 30 *********** 411 2022-08-06 14:53 31 ************ 412 2022-08-06 14:54 ? - 413 2022-08-06 14:55 25 ****** 414 2022-08-06 14:56 25 ****** 415 2022-08-06 14:57 25 ****** 416 2022-08-06 14:58 26 ******* 417 2022-08-06 14:59 26 ******* 418 2022-08-06 15:00 27 ******** ... ..( 2 skipped). .. ******** 421 2022-08-06 15:03 27 ******** 422 2022-08-06 15:04 28 ********* 423 2022-08-06 15:05 28 ********* 424 2022-08-06 15:06 29 ********** 425 2022-08-06 15:07 29 ********** 426 2022-08-06 15:08 30 *********** ... ..( 4 skipped). .. *********** 431 2022-08-06 15:13 30 *********** 432 2022-08-06 15:14 31 ************ ... ..( 2 skipped). .. ************ 435 2022-08-06 15:17 31 ************ 436 2022-08-06 15:18 32 ************* ... ..( 2 skipped). .. ************* 439 2022-08-06 15:21 32 ************* 440 2022-08-06 15:22 33 ************** ... ..( 4 skipped). .. ************** 445 2022-08-06 15:27 33 ************** 446 2022-08-06 15:28 34 *************** ... ..( 10 skipped). .. *************** 457 2022-08-06 15:39 34 *************** 458 2022-08-06 15:40 33 ************** ... ..( 9 skipped). .. ************** 468 2022-08-06 15:50 33 ************** 469 2022-08-06 15:51 ? - 470 2022-08-06 15:52 33 ************** ... ..( 6 skipped). .. ************** 477 2022-08-06 15:59 33 ************** 0 2022-08-06 16:00 34 *************** ... ..( 11 skipped). .. *************** 12 2022-08-06 16:12 34 *************** 13 2022-08-06 16:13 35 **************** ... ..( 19 skipped). .. **************** 33 2022-08-06 16:33 35 **************** 34 2022-08-06 16:34 36 ***************** ... ..( 76 skipped). .. ***************** 111 2022-08-06 17:51 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 17 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 7619 Vendor specific /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.74-generic-2rosa2021.1-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green Device Model: WDC WD10EADS-65L5B1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Sat Aug 6 17:51:52 2022 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (22800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 262) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 181 051 - 14 3 Spin_Up_Time POS--K 162 155 021 - 6858 4 Start_Stop_Count -O--CK 095 095 000 - 5165 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 070 070 000 - 22521 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2800 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1043 193 Load_Cycle_Count -O--CK 199 199 000 - 5165 194 Temperature_Celsius -O---K 112 098 000 - 38 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 1 198 Offline_Uncorrectable ----CK 200 200 000 - 1 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 15241 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 15241 [0] occurred at disk power-on lifetime: 13848 hours (577 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 19 2a 67 cb 40 00 Error: UNC at LBA = 0x192a67cb = 422209483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:31.759 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:31.738 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:28.597 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:28.597 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:25.589 READ FPDMA QUEUED Error 15240 [23] occurred at disk power-on lifetime: 13848 hours (577 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 19 2a 67 cb 40 00 Error: UNC at LBA = 0x192a67cb = 422209483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:28.597 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:28.597 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:25.589 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:25.589 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:22.326 READ FPDMA QUEUED Error 15239 [22] occurred at disk power-on lifetime: 13848 hours (577 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 19 2a 67 cb 40 00 Error: UNC at LBA = 0x192a67cb = 422209483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:25.589 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:25.589 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:22.326 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:22.326 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:19.318 READ FPDMA QUEUED Error 15238 [21] occurred at disk power-on lifetime: 13848 hours (577 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 19 2a 67 cb 40 00 Error: UNC at LBA = 0x192a67cb = 422209483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:22.326 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:22.326 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:19.318 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:19.318 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:16.043 READ FPDMA QUEUED Error 15237 [20] occurred at disk power-on lifetime: 13848 hours (577 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 19 2a 67 cb 40 00 Error: UNC at LBA = 0x192a67cb = 422209483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:19.318 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:19.318 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:16.043 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:16.043 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:13.035 READ FPDMA QUEUED Error 15236 [19] occurred at disk power-on lifetime: 13848 hours (577 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 19 2a 67 cb 40 00 Error: UNC at LBA = 0x192a67cb = 422209483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:16.043 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:16.043 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:13.035 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:13.035 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:10.027 READ FPDMA QUEUED Error 15235 [18] occurred at disk power-on lifetime: 13848 hours (577 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 19 2a 67 cb 40 00 Error: UNC at LBA = 0x192a67cb = 422209483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:13.035 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:13.035 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:10.027 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:10.027 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:07.017 READ FPDMA QUEUED Error 15234 [17] occurred at disk power-on lifetime: 13848 hours (577 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 19 2a 67 cb 40 00 Error: UNC at LBA = 0x192a67cb = 422209483 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:10.027 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:10.027 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:07.017 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:51:06.996 READ LOG EXT 60 01 00 00 08 00 2a 00 67 19 00 40 00 1d+00:51:03.854 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 38/38 Celsius Lifetime Min/Max Temperature: 27/52 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (74) Index Estimated Time Temperature Celsius 75 2022-08-06 09:54 38 ******************* ... ..( 43 skipped). .. ******************* 119 2022-08-06 10:38 38 ******************* 120 2022-08-06 10:39 31 ************ ... ..( 37 skipped). .. ************ 158 2022-08-06 11:17 31 ************ 159 2022-08-06 11:18 ? - 160 2022-08-06 11:19 31 ************ ... ..( 2 skipped). .. ************ 163 2022-08-06 11:22 31 ************ 164 2022-08-06 11:23 32 ************* 165 2022-08-06 11:24 32 ************* 166 2022-08-06 11:25 33 ************** 167 2022-08-06 11:26 33 ************** 168 2022-08-06 11:27 33 ************** 169 2022-08-06 11:28 ? - 170 2022-08-06 11:29 27 ******** 171 2022-08-06 11:30 27 ******** 172 2022-08-06 11:31 28 ********* 173 2022-08-06 11:32 28 ********* 174 2022-08-06 11:33 28 ********* 175 2022-08-06 11:34 29 ********** 176 2022-08-06 11:35 29 ********** 177 2022-08-06 11:36 29 ********** 178 2022-08-06 11:37 30 *********** 179 2022-08-06 11:38 31 ************ ... ..( 4 skipped). .. ************ 184 2022-08-06 11:43 31 ************ 185 2022-08-06 11:44 32 ************* 186 2022-08-06 11:45 33 ************** ... ..( 3 skipped). .. ************** 190 2022-08-06 11:49 33 ************** 191 2022-08-06 11:50 34 *************** ... ..( 8 skipped). .. *************** 200 2022-08-06 11:59 34 *************** 201 2022-08-06 12:00 35 **************** ... ..( 4 skipped). .. **************** 206 2022-08-06 12:05 35 **************** 207 2022-08-06 12:06 36 ***************** ... ..( 3 skipped). .. ***************** 211 2022-08-06 12:10 36 ***************** 212 2022-08-06 12:11 37 ****************** ... ..( 8 skipped). .. ****************** 221 2022-08-06 12:20 37 ****************** 222 2022-08-06 12:21 38 ******************* 223 2022-08-06 12:22 38 ******************* 224 2022-08-06 12:23 38 ******************* 225 2022-08-06 12:24 37 ****************** 226 2022-08-06 12:25 37 ****************** 227 2022-08-06 12:26 ? - 228 2022-08-06 12:27 37 ****************** ... ..( 11 skipped). .. ****************** 240 2022-08-06 12:39 37 ****************** 241 2022-08-06 12:40 36 ***************** ... ..( 4 skipped). .. ***************** 246 2022-08-06 12:45 36 ***************** 247 2022-08-06 12:46 37 ****************** 248 2022-08-06 12:47 37 ****************** 249 2022-08-06 12:48 38 ******************* 250 2022-08-06 12:49 38 ******************* 251 2022-08-06 12:50 37 ****************** 252 2022-08-06 12:51 37 ****************** 253 2022-08-06 12:52 36 ***************** ... ..( 2 skipped). .. ***************** 256 2022-08-06 12:55 36 ***************** 257 2022-08-06 12:56 35 **************** ... ..( 2 skipped). .. **************** 260 2022-08-06 12:59 35 **************** 261 2022-08-06 13:00 ? - 262 2022-08-06 13:01 35 **************** ... ..( 4 skipped). .. **************** 267 2022-08-06 13:06 35 **************** 268 2022-08-06 13:07 36 ***************** 269 2022-08-06 13:08 37 ****************** ... ..( 3 skipped). .. ****************** 273 2022-08-06 13:12 37 ****************** 274 2022-08-06 13:13 38 ******************* ... ..( 41 skipped). .. ******************* 316 2022-08-06 13:55 38 ******************* 317 2022-08-06 13:56 37 ****************** 318 2022-08-06 13:57 37 ****************** 319 2022-08-06 13:58 38 ******************* ... ..( 48 skipped). .. ******************* 368 2022-08-06 14:47 38 ******************* 369 2022-08-06 14:48 37 ****************** 370 2022-08-06 14:49 37 ****************** 371 2022-08-06 14:50 37 ****************** 372 2022-08-06 14:51 38 ******************* ... ..( 21 skipped). .. ******************* 394 2022-08-06 15:13 38 ******************* 395 2022-08-06 15:14 39 ******************** ... ..( 6 skipped). .. ******************** 402 2022-08-06 15:21 39 ******************** 403 2022-08-06 15:22 40 ********************* 404 2022-08-06 15:23 39 ******************** ... ..( 14 skipped). .. ******************** 419 2022-08-06 15:38 39 ******************** 420 2022-08-06 15:39 40 ********************* ... ..( 6 skipped). .. ********************* 427 2022-08-06 15:46 40 ********************* 428 2022-08-06 15:47 39 ******************** 429 2022-08-06 15:48 39 ******************** 430 2022-08-06 15:49 39 ******************** 431 2022-08-06 15:50 40 ********************* 432 2022-08-06 15:51 39 ******************** ... ..( 12 skipped). .. ******************** 445 2022-08-06 16:04 39 ******************** 446 2022-08-06 16:05 38 ******************* ... ..( 25 skipped). .. ******************* 472 2022-08-06 16:31 38 ******************* 473 2022-08-06 16:32 ? - 474 2022-08-06 16:33 38 ******************* ... ..( 77 skipped). .. ******************* 74 2022-08-06 17:51 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x8000 4 7624 Vendor specific