Probe #4c0bb83f01 of ASRock B460M Pro4 Desktop Computer

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: WD Blue and Green SSDs Device Model: WDC WDS240G2G0A-00JH30 Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: UF220400 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Oct 7 11:14:41 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 41) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 5 9 Power_On_Hours -O--CK 100 100 000 - 1436 12 Power_Cycle_Count -O--CK 100 100 000 - 1638 165 Block_Erase_Count -O--CK 100 100 000 - 1150 166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 11 167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 22 168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 24 169 Total_Bad_Blocks -O--CK 100 100 --- - 166 170 Grown_Bad_Blocks -O--CK 100 100 --- - 5 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 11 174 Unexpected_Power_Loss -O--CK 100 100 000 - 627 184 End-to-End_Error -O--CK 100 100 --- - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 --- - 0 194 Temperature_Celsius -O---K 068 058 000 - 32 (Min/Max 13/58) 199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x031c0214031c 232 Available_Reservd_Space PO--CK 100 100 005 - 97 233 NAND_GB_Written_TLC -O--CK 100 100 --- - 2911 234 NAND_GB_Written_SLC -O--CK 100 100 000 - 9166 241 Host_Writes_GiB ----CK 100 100 000 - 3261 242 Host_Reads_GiB ----CK 100 100 000 - 9937 244 Temp_Throttle_Status -O--CK 000 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 16 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 1 Device vendor specific log 0xa2 GPL,SL VS 2 Device vendor specific log 0xa3-0xa4 GPL,SL VS 1 Device vendor specific log 0xa7 GPL,SL VS 1 Device vendor specific log 0xa9 GPL,SL VS 4 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (16 sectors) Device Error Count: 4 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 [3] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 45 16d+13:40:55.765 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 44 13d+06:08:44.612 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 43 9d+22:36:33.459 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 42 6d+15:04:22.306 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 41 3d+07:32:11.153 NOP [Abort queued commands] Error 3 [2] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 35 16d+13:40:55.765 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 34 13d+06:08:44.612 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 33 9d+22:36:33.459 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 32 6d+15:04:22.306 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 31 3d+07:32:11.153 NOP [Abort queued commands] Error 2 [1] occurred at disk power-on lifetime: 61166 hours (2548 days + 14 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 25 16d+13:40:55.765 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 24 13d+06:08:44.612 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 23 9d+22:36:33.459 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 22 6d+15:04:22.306 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 21 3d+07:32:11.153 NOP [Abort queued commands] Error 1 [0] occurred at disk power-on lifetime: 43981 hours (1832 days + 13 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 15 16d+13:40:55.765 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 14 13d+06:08:44.612 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 13 9d+22:36:33.459 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 12 6d+15:04:22.306 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 00 00 00 00 11 3d+07:32:11.153 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1638 --- Lifetime Power-On Resets 0x01 0x010 4 1436 --- Power-on Hours 0x01 0x018 6 6839650358 --- Logical Sectors Written 0x01 0x028 6 20839539633 --- Logical Sectors Read 0x01 0x038 6 1436 --- Date and Time TimeStamp 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x010 1 - --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 55 --- Highest Temperature 0x05 0x028 1 20 --- Lowest Temperature 0x05 0x030 1 42 --- Highest Average Short Term Temperature 0x05 0x038 1 42 --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 95 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 2 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 136 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0001 2 0 Command failed due to ICRC error /dev/sdb === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint S250 Device Model: SAMSUNG HD200HJ Serial Number: -- LU WWN Device Id: 5 0000f0 ... Firmware Version: KF100-05 User Capacity: 200,048,565,760 bytes [200 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Fri Oct 7 11:14:41 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled Read SMART Data failed: scsi error badly formed scsi parameters === START OF READ SMART DATA SECTION === SMART Status command failed: scsi error badly formed scsi parameters SMART overall-health self-assessment test result: UNKNOWN! SMART Status, Attributes and Thresholds cannot be read. Read SMART Log Directory failed: scsi error badly formed scsi parameters General Purpose Log Directory Version 1 Address Access R/W Size Description 0x00 GPL R/O 1 Log Directory 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL R/W 16 Host vendor specific log 0xe0 GPL R/W 1 SCT Command/Status 0xe1 GPL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 20 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 20 [3] occurred at disk power-on lifetime: 16483 hours (686 days + 19 hours) When the command that caused the error occurred, the device was in a reserved state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 58 00 03 01 00 00 02 46 00 74 00 00 00:00:21.337 NOP [Abort queued commands] Error 19 [2] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in a reserved state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 59 03 01 02 74 00 00 00 00 46 00 03 58 00:00:00.000 [RESERVED] 00 00 00 00 04 00 00 4f 51 c2 00 60 00 00:00:00.000 NOP [Abort queued commands] Error 18 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 02 74 00 00 59 00 00 03 00 46 53 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 01 04 4f 00 00 00 00 60 51 c2 e7 00 06:15:44.384 NOP [Reserved subcommand] [OBS-ACS-2] Error 17 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 c2 4f e7 60 51 00 00 00 00 01 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 00 00 00 00 00 00 00 00 00 00 00 00 18:38:28.864 NOP [Abort queued commands] 00 00 00 00 46 00 59 00 53 03 00 00 02 00:00:00.000 NOP [Abort queued commands] 00 4f 00 00 c2 00 00 00 e7 60 51 00 01 22d+12:39:14.008 NOP [Abort queued commands] Error 16 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in a reserved state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 58 00 03 01 00 00 02 46 00 74 00 00 00:00:21.337 NOP [Abort queued commands] Error 15 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in a reserved state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 58 00 03 01 00 00 02 46 00 74 00 00 00:00:21.337 NOP [Abort queued commands] Error 14 [5] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in a reserved state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 20 -- 00 00 00 40 00 00 00 00 00 60 20 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 75 00 01 00 00 60 00 00 40 c2 4f 00 d0 6d+05:07:50.917 SEEK [RET-4] 00 00 00 00 00 00 00 00 00 00 00 00 00 40d+09:21:00.928 NOP [Abort queued commands] 00 58 00 03 01 00 00 02 46 00 74 00 00 00:00:21.337 NOP [Abort queued commands] Error 13 [4] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in a reserved state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 00 00 00 00 00 00 00 00 00 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 91 11 b1 11 00 00 c9 04 11 11 00 89 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] SMART Extended Self-test Log (GP Log 0x07) not supported Read SMART Self-test Log failed: scsi error badly formed scsi parameters Selective Self-tests/Logging not supported SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 23 Celsius Power Cycle Min/Max Temperature: 19/23 Celsius Lifetime Min/Max Temperature: 5/55 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (45) Index Estimated Time Temperature Celsius 46 2022-10-07 09:07 25 ****** 47 2022-10-07 09:08 25 ****** 48 2022-10-07 09:09 26 ******* 49 2022-10-07 09:10 27 ******** 50 2022-10-07 09:11 27 ******** 51 2022-10-07 09:12 28 ********* 52 2022-10-07 09:13 28 ********* 53 2022-10-07 09:14 28 ********* 54 2022-10-07 09:15 29 ********** 55 2022-10-07 09:16 29 ********** 56 2022-10-07 09:17 30 *********** 57 2022-10-07 09:18 30 *********** 58 2022-10-07 09:19 30 *********** 59 2022-10-07 09:20 31 ************ 60 2022-10-07 09:21 31 ************ 61 2022-10-07 09:22 31 ************ 62 2022-10-07 09:23 32 ************* ... ..( 2 skipped). .. ************* 65 2022-10-07 09:26 32 ************* 66 2022-10-07 09:27 33 ************** 67 2022-10-07 09:28 33 ************** 68 2022-10-07 09:29 35 **************** ... ..( 4 skipped). .. **************** 73 2022-10-07 09:34 35 **************** 74 2022-10-07 09:35 36 ***************** 75 2022-10-07 09:36 35 **************** 76 2022-10-07 09:37 36 ***************** 77 2022-10-07 09:38 36 ***************** 78 2022-10-07 09:39 37 ****************** ... ..( 8 skipped). .. ****************** 87 2022-10-07 09:48 37 ****************** 88 2022-10-07 09:49 38 ******************* ... ..( 8 skipped). .. ******************* 97 2022-10-07 09:58 38 ******************* 98 2022-10-07 09:59 32 ************* 99 2022-10-07 10:00 33 ************** 100 2022-10-07 10:01 33 ************** 101 2022-10-07 10:02 35 **************** ... ..( 4 skipped). .. **************** 106 2022-10-07 10:07 35 **************** 107 2022-10-07 10:08 36 ***************** ... ..( 3 skipped). .. ***************** 111 2022-10-07 10:12 36 ***************** 112 2022-10-07 10:13 37 ****************** ... ..( 8 skipped). .. ****************** 121 2022-10-07 10:22 37 ****************** 122 2022-10-07 10:23 20 * 123 2022-10-07 10:24 22 *** 124 2022-10-07 10:25 22 *** 125 2022-10-07 10:26 23 **** 126 2022-10-07 10:27 24 ***** 127 2022-10-07 10:28 25 ****** 0 2022-10-07 10:29 26 ******* 1 2022-10-07 10:30 26 ******* 2 2022-10-07 10:31 27 ******** 3 2022-10-07 10:32 27 ******** 4 2022-10-07 10:33 28 ********* 5 2022-10-07 10:34 28 ********* 6 2022-10-07 10:35 29 ********** 7 2022-10-07 10:36 29 ********** 8 2022-10-07 10:37 30 *********** 9 2022-10-07 10:38 30 *********** 10 2022-10-07 10:39 30 *********** 11 2022-10-07 10:40 31 ************ 12 2022-10-07 10:41 31 ************ 13 2022-10-07 10:42 31 ************ 14 2022-10-07 10:43 32 ************* 15 2022-10-07 10:44 32 ************* 16 2022-10-07 10:45 30 *********** 17 2022-10-07 10:46 27 ******** 18 2022-10-07 10:47 28 ********* 19 2022-10-07 10:48 28 ********* 20 2022-10-07 10:49 29 ********** 21 2022-10-07 10:50 29 ********** 22 2022-10-07 10:51 30 *********** 23 2022-10-07 10:52 30 *********** 24 2022-10-07 10:53 31 ************ 25 2022-10-07 10:54 31 ************ 26 2022-10-07 10:55 32 ************* ... ..( 2 skipped). .. ************* 29 2022-10-07 10:58 32 ************* 30 2022-10-07 10:59 33 ************** 31 2022-10-07 11:00 33 ************** 32 2022-10-07 11:01 35 **************** ... ..( 3 skipped). .. **************** 36 2022-10-07 11:05 35 **************** 37 2022-10-07 11:06 36 ***************** 38 2022-10-07 11:07 36 ***************** 39 2022-10-07 11:08 37 ****************** 40 2022-10-07 11:09 19 - 41 2022-10-07 11:10 20 * 42 2022-10-07 11:11 21 ** 43 2022-10-07 11:12 22 *** 44 2022-10-07 11:13 23 **** 45 2022-10-07 11:14 24 ***** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8001 2 0 Vendor specific /dev/sdc === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.6 Device Model: ST9320325AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: 0003BSM1 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Fri Oct 7 11:14:41 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 95) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 102 099 006 - 4616547 3 Spin_Up_Time PO---- 098 098 000 - 0 4 Start_Stop_Count -O--CK 097 097 020 - 3748 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 081 060 030 - 134603851 9 Power_On_Hours -O--CK 096 096 000 - 3713 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 037 020 - 3609 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 098 000 - 4295033217 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 072 051 045 - 28 (Min/Max 24/28) 191 G-Sense_Error_Rate -O--CK 097 097 000 - 7778 192 Power-Off_Retract_Count -O--CK 100 100 000 - 284 193 Load_Cycle_Count -O--CK 085 085 000 - 30133 194 Temperature_Celsius -O---K 028 049 000 - 28 (0 13 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 063 055 000 - 4616547 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 65 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2864 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 24/28 Celsius Lifetime Min/Max Temperature: 13/51 Celsius Under/Over Temperature Limit Count: 0/6 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (110) Index Estimated Time Temperature Celsius 111 2022-10-07 09:07 29 ********** 112 2022-10-07 09:08 ? - 113 2022-10-07 09:09 25 ****** 114 2022-10-07 09:10 25 ****** 115 2022-10-07 09:11 26 ******* 116 2022-10-07 09:12 27 ******** 117 2022-10-07 09:13 28 ********* 118 2022-10-07 09:14 28 ********* 119 2022-10-07 09:15 ? - 120 2022-10-07 09:16 24 ***** 121 2022-10-07 09:17 25 ****** 122 2022-10-07 09:18 26 ******* 123 2022-10-07 09:19 27 ******** 124 2022-10-07 09:20 27 ******** 125 2022-10-07 09:21 28 ********* 126 2022-10-07 09:22 28 ********* 127 2022-10-07 09:23 29 ********** 0 2022-10-07 09:24 29 ********** 1 2022-10-07 09:25 29 ********** 2 2022-10-07 09:26 ? - 3 2022-10-07 09:27 25 ****** 4 2022-10-07 09:28 26 ******* 5 2022-10-07 09:29 27 ******** 6 2022-10-07 09:30 28 ********* 7 2022-10-07 09:31 ? - 8 2022-10-07 09:32 28 ********* 9 2022-10-07 09:33 28 ********* 10 2022-10-07 09:34 29 ********** 11 2022-10-07 09:35 29 ********** 12 2022-10-07 09:36 30 *********** 13 2022-10-07 09:37 30 *********** 14 2022-10-07 09:38 ? - 15 2022-10-07 09:39 26 ******* 16 2022-10-07 09:40 26 ******* 17 2022-10-07 09:41 27 ******** 18 2022-10-07 09:42 28 ********* 19 2022-10-07 09:43 ? - 20 2022-10-07 09:44 26 ******* 21 2022-10-07 09:45 26 ******* 22 2022-10-07 09:46 28 ********* 23 2022-10-07 09:47 28 ********* 24 2022-10-07 09:48 28 ********* 25 2022-10-07 09:49 29 ********** 26 2022-10-07 09:50 29 ********** 27 2022-10-07 09:51 29 ********** 28 2022-10-07 09:52 30 *********** 29 2022-10-07 09:53 31 ************ 30 2022-10-07 09:54 31 ************ 31 2022-10-07 09:55 31 ************ 32 2022-10-07 09:56 30 *********** 33 2022-10-07 09:57 31 ************ 34 2022-10-07 09:58 ? - 35 2022-10-07 09:59 31 ************ 36 2022-10-07 10:00 31 ************ 37 2022-10-07 10:01 32 ************* 38 2022-10-07 10:02 ? - 39 2022-10-07 10:03 26 ******* 40 2022-10-07 10:04 27 ******** 41 2022-10-07 10:05 27 ******** 42 2022-10-07 10:06 29 ********** 43 2022-10-07 10:07 30 *********** 44 2022-10-07 10:08 31 ************ 45 2022-10-07 10:09 31 ************ 46 2022-10-07 10:10 29 ********** 47 2022-10-07 10:11 ? - 48 2022-10-07 10:12 29 ********** 49 2022-10-07 10:13 30 *********** 50 2022-10-07 10:14 30 *********** 51 2022-10-07 10:15 31 ************ 52 2022-10-07 10:16 ? - 53 2022-10-07 10:17 29 ********** 54 2022-10-07 10:18 30 *********** 55 2022-10-07 10:19 29 ********** 56 2022-10-07 10:20 30 *********** 57 2022-10-07 10:21 29 ********** 58 2022-10-07 10:22 27 ******** 59 2022-10-07 10:23 29 ********** 60 2022-10-07 10:24 ? - 61 2022-10-07 10:25 24 ***** 62 2022-10-07 10:26 ? - 63 2022-10-07 10:27 24 ***** 64 2022-10-07 10:28 25 ****** 65 2022-10-07 10:29 29 ********** 66 2022-10-07 10:30 ? - 67 2022-10-07 10:31 24 ***** 68 2022-10-07 10:32 24 ***** 69 2022-10-07 10:33 26 ******* 70 2022-10-07 10:34 26 ******* 71 2022-10-07 10:35 27 ******** 72 2022-10-07 10:36 28 ********* 73 2022-10-07 10:37 29 ********** 74 2022-10-07 10:38 30 *********** 75 2022-10-07 10:39 30 *********** 76 2022-10-07 10:40 30 *********** 77 2022-10-07 10:41 28 ********* 78 2022-10-07 10:42 30 *********** 79 2022-10-07 10:43 30 *********** 80 2022-10-07 10:44 29 ********** 81 2022-10-07 10:45 28 ********* 82 2022-10-07 10:46 ? - 83 2022-10-07 10:47 24 ***** 84 2022-10-07 10:48 25 ****** 85 2022-10-07 10:49 29 ********** 86 2022-10-07 10:50 29 ********** 87 2022-10-07 10:51 28 ********* 88 2022-10-07 10:52 28 ********* 89 2022-10-07 10:53 ? - 90 2022-10-07 10:54 25 ****** 91 2022-10-07 10:55 26 ******* 92 2022-10-07 10:56 28 ********* 93 2022-10-07 10:57 29 ********** 94 2022-10-07 10:58 ? - 95 2022-10-07 10:59 25 ****** 96 2022-10-07 11:00 ? - 97 2022-10-07 11:01 25 ****** 98 2022-10-07 11:02 ? - 99 2022-10-07 11:03 25 ****** 100 2022-10-07 11:04 ? - 101 2022-10-07 11:05 26 ******* 102 2022-10-07 11:06 ? - 103 2022-10-07 11:07 26 ******* 104 2022-10-07 11:08 ? - 105 2022-10-07 11:09 24 ***** 106 2022-10-07 11:10 25 ****** 107 2022-10-07 11:11 25 ****** 108 2022-10-07 11:12 26 ******* 109 2022-10-07 11:13 27 ******** 110 2022-10-07 11:14 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS


Hardware for Linux and BSD

GitHub