Probe #4e9f8e4c01 of ASUSTek M3N

Log: smartctl

/dev/sda smartctl 7.3 2022-02-28 r5338 [i686-linux-6.0.0-5-686] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Fujitsu MHV Device Model: FUJITSU MHV2120AH Serial Number: -- Firmware Version: 000000A0 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database 7.3/5319 ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a Local Time is: Wed Dec 14 19:29:43 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 647) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 82) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 046 - 149939 2 Throughput_Performance P-S--- 100 100 030 - 26804682 3 Spin_Up_Time PO---- 100 100 025 - 1 4 Start_Stop_Count -O--CK 099 099 000 - 4179 5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0 (2000 0) 7 Seek_Error_Rate POSR-- 100 100 047 - 2839 8 Seek_Time_Performance P-S--- 100 100 019 - 0 9 Power_On_Seconds -O--CK 066 066 000 - 17052h+47m+21s 10 Spin_Retry_Count PO--C- 100 100 020 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 4179 192 Power-Off_Retract_Count -O--CK 098 098 000 - 525 193 Load_Cycle_Count -O--CK 095 095 000 - 111990 194 Temperature_Celsius -O---K 100 100 000 - 45 (Min/Max 16/59) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 3636 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 (0 6923) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate POSR-- 100 100 060 - 14649 203 Run_Out_Cancel -O---- 100 100 000 - 429528579112 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x09 SL R/W 1 Selective self-test log 0x80-0x9f SL R/W 16 Host vendor specific log 0xa1 SL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 12105 - # 2 Extended offline Interrupted (host reset) 70% 12103 - # 3 Conveyance offline Completed without error 00% 12103 - # 4 Short offline Completed without error 00% 12103 - # 5 Extended offline Completed without error 00% 9365 - # 6 Short offline Completed without error 00% 9364 - # 7 Extended offline Aborted by host 60% 9364 - # 8 Extended offline Completed without error 00% 1653 - # 9 Extended offline Completed without error 00% 211 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 45 Celsius Power Cycle Min/Max Temperature: --/46 Celsius Lifetime Min/Max Temperature: --/59 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (11) Index Estimated Time Temperature Celsius 12 2022-12-14 17:22 43 ************************ ... ..( 62 skipped). .. ************************ 75 2022-12-14 18:25 43 ************************ 76 2022-12-14 18:26 42 *********************** 77 2022-12-14 18:27 43 ************************ ... ..( 27 skipped). .. ************************ 105 2022-12-14 18:55 43 ************************ 106 2022-12-14 18:56 44 ************************* 107 2022-12-14 18:57 43 ************************ 108 2022-12-14 18:58 43 ************************ 109 2022-12-14 18:59 44 ************************* ... ..( 18 skipped). .. ************************* 0 2022-12-14 19:18 44 ************************* 1 2022-12-14 19:19 45 ************************** 2 2022-12-14 19:20 45 ************************** 3 2022-12-14 19:21 44 ************************* 4 2022-12-14 19:22 45 ************************** 5 2022-12-14 19:23 45 ************************** 6 2022-12-14 19:24 45 ************************** 7 2022-12-14 19:25 46 *************************** 8 2022-12-14 19:26 45 ************************** 9 2022-12-14 19:27 46 *************************** 10 2022-12-14 19:28 46 *************************** 11 2022-12-14 19:29 45 ************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported


Hardware for Linux and BSD

GitHub